summaryrefslogtreecommitdiff
path: root/src/map/map.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/map/map.c')
-rw-r--r--src/map/map.c340
1 files changed, 335 insertions, 5 deletions
diff --git a/src/map/map.c b/src/map/map.c
index 110c70850..9a4f35a35 100644
--- a/src/map/map.c
+++ b/src/map/map.c
@@ -46,6 +46,10 @@
#include "memwatch.h"
#endif
+
+// maybe put basic macros to somewhere else
+#define swap(a,b) ((a == b) || ((a ^= b), (b ^= a), (a ^= b)))
+
unsigned long ticks = 0; // by MC Cameri
#ifndef TXT_ONLY
@@ -152,10 +156,10 @@ struct charid2nick {
int req_id;
};
-// ޫë׫ëīի髰(map_athana.conf?read_map_from_cache)
+// ޫë׫ëīի髰(map_athana.conf?read_map_from_cacheE)
// 0:Īʪ 1:ު? 2:?
int map_read_flag = READ_FROM_GAT;
-char map_cache_file[256]="db/map.info"; // ޫë׫ëի٣
+char map_cache_file[256]="db/map.info"; // ޫë׫ëիE
char motd_txt[256] = "conf/motd.txt";
char help_txt[256] = "conf/help.txt";
@@ -397,7 +401,7 @@ int map_count_oncell(int m, int x, int y) {
return count;
}
/*
- * ߾̸Ī˫ëȪ
+ * E̸ĪE˫ëȪ
*/
struct skill_unit *map_find_skill_unit_oncell(int m,int x,int y,int skill_id)
{
@@ -657,8 +661,9 @@ void map_foreachincell(int (*func)(struct block_list*,va_list),int m,int x,int y
* For checking a path between two points (x0, y0) and (x1, y1)
*------------------------------------------------------------
*/
-void map_foreachinpath(int (*func)(struct block_list*,va_list),int m,int x0,int y0,int x1,int y1,int type,...) {
- va_list ap;
+void map_foreachinpath(int (*func)(struct block_list*,va_list),int m,int x0,int y0,int x1,int y1,int range,int length,int type,...)
+{
+/* va_list ap;
double deltax = 0.0;
double deltay = 0.0;
int t, bx, by;
@@ -707,6 +712,15 @@ void map_foreachinpath(int (*func)(struct block_list*,va_list),int m,int x0,int
}
if (type == 0 || type != BL_MOB)
+
+
+this here is wrong,
+there is no check if x0<x1 and y0<y1
+but this is not valid in 3 of 4 cases,
+so in this case here you check only blocks when shooting to a positive direction
+shooting in other directions just do nothing like the skill has failed
+if you want to keep this that way then check and swap x0,y0 with x1,y1
+
for (by = y0 / BLOCK_SIZE; by <= y1 / BLOCK_SIZE; by++) {
for(bx=x0/BLOCK_SIZE;bx<=x1/BLOCK_SIZE;bx++){
bl = map[m].block[bx+by*map[m].bxs];
@@ -754,6 +768,322 @@ void map_foreachinpath(int (*func)(struct block_list*,va_list),int m,int x0,int
aFree (xs);
aFree (ys);
va_end(ap);
+
+*/
+
+/*
+//////////////////////////////////////////////////////////////
+//
+// sharp shooting 1
+//
+//////////////////////////////////////////////////////////////
+// problem:
+// finding targets standing on and within some range of a line
+// (t1,t2 t3 and t4 get hit)
+//
+// target 1
+// x t4
+// t2
+// t3 x
+// x
+// S
+//////////////////////////////////////////////////////////////
+// solution 1 (straight forward, but a bit calculation expensive)
+// calculating perpendiculars from quesionable mobs to the straight line
+// if the mob is hit then depends on the distance to the line
+//
+// solution 2 (complex, need to handle many cases, but maybe faster)
+// make a formula to deside if a given (x,y) is within a shooting area
+// the shape can be ie. rectangular or triangular
+// if the mob is hit then depends on if the mob is inside or outside the area
+// I'm not going to implement this, but if somebody is interested
+// in vector algebra, it might be some fun
+
+//////////////////////////////////////////////////////////////
+// possible shooting ranges (I prefer the second one)
+//////////////////////////////////////////////////////////////
+//
+// ---------------- ------
+// ---------------- ------------
+// Sxxxxxxxxxxxxxxxxtarget Sxxxxxxxxxxxxxxxxtarget
+// ---------------- ------------
+// ---------------- -----
+//
+// the original code implemented the left structure
+// might be not that realistic, so I changed to the other one
+// I take "range" as max distance from the line
+//////////////////////////////////////////////////////////////
+
+ va_list ap;
+ int i, blockcount = bl_list_count;
+ struct block_list *bl;
+ int c1,c2;
+
+///////////
+ double deltax,deltay;
+ double k,kfact,knorm;
+ double v1,v2,distance;
+ double xm,ym,rd;
+ int bx,by,bx0,bx1,by0,by1;
+//////////////
+ // no map
+ if(m < 0) return;
+
+ // xy out of range
+ if (x0 < 0) x0 = 0;
+ if (y0 < 0) y0 = 0;
+ if (x1 >= map[m].xs) x1 = map[m].xs-1;
+ if (y1 >= map[m].ys) y1 = map[m].ys-1;
+
+ ///////////////////////////////
+ // stuff for a linear equation in xy coord to calculate
+ // the perpendicular from a block xy to the straight line
+ deltax = (x1-x0);
+ deltay = (y1-y0);
+ kfact = (deltax*deltax+deltay*deltay); // the sqare length of the line
+ knorm = -deltax*x0-deltay*y0; // the offset vector param
+
+//printf("(%i,%i)(%i,%i) range: %i\n",x0,y0,x1,y1,range);
+
+ if(kfact==0) return; // shooting at the standing position should not happen
+ kfact = 1/kfact; // divide here and multiply in the loop
+
+ range *= range; // compare with range^2 so we can skip a sqrt and signs
+
+ ///////////////////////////////
+ // prepare shooting area check
+ xm = (x1+x0)/2.0;
+ ym = (y1+y0)/2.0;// middle point on the shooting line
+ // the sqared radius of a circle around the shooting range
+ // plus the sqared radius of a block
+ rd = (x0-xm)*(x0-xm) + (y0-ym)*(y0-ym) + (range*range)
+ +BLOCK_SIZE*BLOCK_SIZE/2;
+ // so whenever a block midpoint is within this circle
+ // some of the block area is possibly within the shooting range
+
+ ///////////////////////////////
+ // what blocks we need to test
+ // blocks covered by the xy position of begin and end of the line
+ bx0 = x0/BLOCK_SIZE;
+ bx1 = x1/BLOCK_SIZE;
+ by0 = y0/BLOCK_SIZE;
+ by1 = y1/BLOCK_SIZE;
+ // swap'em for a smallest-to-biggest run
+ if(bx0>bx1) swap(bx0,bx1);
+ if(by0>by1) swap(by0,by1);
+
+ // enlarge the block area by a range value and 1
+ // so we can be sure to process all blocks that might touch the shooting area
+ // in this case here with BLOCK_SIZE=8 and range=2 it will be only enlarged by 1
+ // but I implement it anyway just in case that ranges will be larger
+ // or BLOCK_SIZE smaller in future
+ i = (range/BLOCK_SIZE+1);//temp value
+ if(bx0>i) bx0 -=i; else bx0=0;
+ if(by0>i) by0 -=i; else by0=0;
+ if(bx1+i<map[m].bxs) bx1 +=i; else bx1=map[m].bxs-1;
+ if(by1+i<map[m].bys) by1 +=i; else by1=map[m].bys-1;
+
+
+//printf("run for (%i,%i)(%i,%i)\n",bx0,by0,bx1,by1);
+ for(bx=bx0; bx<=bx1; bx++)
+ for(by=by0; by<=by1; by++)
+ { // block xy
+ c1 = map[m].block_count[bx+by*map[m].bxs]; // number of elements in the block
+ c2 = map[m].block_mob_count[bx+by*map[m].bxs]; // number of mobs in the mob block
+ if( (c1==0) && (c2==0) ) continue; // skip if nothing in the blocks
+
+//printf("block(%i,%i) %i %i\n",bx,by,c1,c2);fflush(stdout);
+ // test if the mid-point of the block is too far away
+ // so we could skip the whole block in this case
+ v1 = (bx*BLOCK_SIZE+BLOCK_SIZE/2-xm)*(bx*BLOCK_SIZE+BLOCK_SIZE/2-xm)
+ +(by*BLOCK_SIZE+BLOCK_SIZE/2-ym)*(by*BLOCK_SIZE+BLOCK_SIZE/2-ym);
+//printf("block(%i,%i) v1=%f rd=%f\n",bx,by,v1,rd);fflush(stdout);
+ // check for the worst case scenario
+ if(v1 > rd) continue;
+
+ // it seems that the block is at least partially covered by the shooting range
+ // so we go into it
+ if(type==0 || type!=BL_MOB) {
+ bl = map[m].block[bx+by*map[m].bxs]; // a block with the elements
+ for(i=0;i<c1 && bl;i++,bl=bl->next){ // go through all elements
+ if( bl && ( !type || bl->type==type ) && bl_list_count<BL_LIST_MAX )
+ {
+ // calculate the perpendicular from block xy to the straight line
+ k = kfact*(deltax*bl->x + deltay*bl->y + knorm);
+ // check if the perpendicular is within start and end of our line
+ if(k>=0 && k<=1)
+ { // calculate the distance
+ v1 = deltax*k+x0 - bl->x;
+ v2 = deltay*k+y0 - bl->y;
+ distance = v1*v1+v2*v2;
+ // triangular shooting range
+ if( distance <= range*k )
+ bl_list[bl_list_count++]=bl;
+ }
+ }
+ }//end for elements
+ }
+
+ if(type==0 || type==BL_MOB) {
+ bl = map[m].block_mob[bx+by*map[m].bxs]; // and the mob block
+ for(i=0;i<c2 && bl;i++,bl=bl->next){
+ if(bl && bl_list_count<BL_LIST_MAX) {
+ // calculate the perpendicular from block xy to the straight line
+ k = kfact*(deltax*bl->x + deltay*bl->y + knorm);
+//printf("mob: (%i,%i) k=%f ",bl->x,bl->y, k);
+ // check if the perpendicular is within start and end of our line
+ if(k>=0 && k<=1)
+ {
+ v1 = deltax*k+x0 - bl->x;
+ v2 = deltay*k+y0 - bl->y;
+ distance = v1*v1+v2*v2;
+//printf("dist: %f",distance);
+ // triangular shooting range
+ if( distance <= range*k )
+ {
+//printf(" hit");
+ bl_list[bl_list_count++]=bl;
+ }
+ }
+//printf("\n");
+ }
+ }//end for mobs
+ }
+ }//end for(bx,by)
+
+
+ if(bl_list_count>=BL_LIST_MAX) {
+ if(battle_config.error_log)
+ printf("map_foreachinarea: *WARNING* block count too many!\n");
+ }
+
+ va_start(ap,type);
+ map_freeblock_lock(); // ̉֎~
+
+ for(i=blockcount;i<bl_list_count;i++)
+ if(bl_list[i]->prev) // L?ǂ`FbN
+ func(bl_list[i],ap);
+
+ map_freeblock_unlock(); // ‚
+ va_end(ap);
+
+ bl_list_count = blockcount;
+
+*/
+
+
+//////////////////////////////////////////////////////////////
+//
+// sharp shooting 2
+//
+//////////////////////////////////////////////////////////////
+// problem:
+// finding targets standing exactly on a line
+// (only t1 and t2 get hit)
+//
+// target 1
+// x t4
+// t2
+// t3 x
+// x
+// S
+//////////////////////////////////////////////////////////////
+ va_list ap;
+ int i, blockcount = bl_list_count;
+ struct block_list *bl;
+ int c1,c2;
+
+ //////////////////////////////////////////////////////////////
+ // linear parametric equation
+ // x=(x1-x0)*t+x0; y=(y1-y0)*t+y0; t=[0,1]
+ //////////////////////////////////////////////////////////////
+ // linear equation for finding a single line between (x0,y0)->(x1,y1)
+ // independent of the given xy-values
+ double deltax = (x1-x0);
+ double deltay = (y1-y0);
+ double dx = 0.0;
+ double dy = 0.0;
+ int bx=-1; // initialize block coords to some impossible value
+ int by=-1;
+
+ int t;
+ ///////////////////////////////
+ // find maximum runindex
+ int tmax = abs(y1-y0);
+ if(tmax < abs(x1-x0))
+ tmax = abs(x1-x0);
+ // pre-calculate delta values for x and y destination
+ // should speed up cause you don't need to divide in the loop
+ if(tmax>0)
+ {
+ dx = ((double)(x1-x0)) / ((double)tmax);
+ dy = ((double)(y1-y0)) / ((double)tmax);
+ }
+ // go along the index
+ for(t=0; t<=tmax; t++)
+ { // xy-values of the line including start and end point
+ int x = (int)floor(deltax * (double)t +0.5)+x0;
+ int y = (int)floor(deltay * (double)t +0.5)+y0;
+
+ // check the block index of the calculated xy
+ if( (bx!=x/BLOCK_SIZE) || (by!=y/BLOCK_SIZE) )
+ { // we have reached a new block
+ // so we store the current block coordinates
+ bx = x/BLOCK_SIZE;
+ by = y/BLOCK_SIZE;
+
+ // and process the data
+ c1 = map[m].block_count[bx+by*map[m].bxs]; // number of elements in the block
+ c2 = map[m].block_mob_count[bx+by*map[m].bxs]; // number of mobs in the mob block
+ if( (c1==0) && (c2==0) ) continue; // skip if nothing in the block
+
+ if(type==0 || type!=BL_MOB) {
+ bl = map[m].block[bx+by*map[m].bxs]; // a block with the elements
+ for(i=0;i<c1 && bl;i++,bl=bl->next){ // go through all elements
+ if( bl && ( !type || bl->type==type ) && bl_list_count<BL_LIST_MAX )
+ {
+ // check if block xy is on the line
+ if( (bl->x-x0)*(y1-y0) == (bl->y-y0)*(x1-x0) )
+ // and if it is within start and end point
+ if( ((x0<=x1)&&(x0<=bl->x)&&(bl->x<=x1) || (x0>=x1)&&(x0>=bl->x)&&(bl->x>=x1)) &&
+ ((y0<=y1)&&(y0<=bl->y)&&(bl->y<=y1) || (y0>=y1)&&(y0>=bl->y)&&(bl->y>=y1)) )
+ bl_list[bl_list_count++]=bl;
+ }
+ }//end for elements
+ }
+
+ if(type==0 || type==BL_MOB) {
+ bl = map[m].block_mob[bx+by*map[m].bxs]; // and the mob block
+ for(i=0;i<c2 && bl;i++,bl=bl->next){
+ if(bl && bl_list_count<BL_LIST_MAX) {
+ // check if mob xy is on the line
+ if( (bl->x-x0)*(y1-y0) == (bl->y-y0)*(x1-x0) )
+ // and if it is within start and end point
+ if( ((x0<=x1)&&(x0<=bl->x)&&(bl->x<=x1) || (x0>=x1)&&(x0>=bl->x)&&(bl->x>=x1)) &&
+ ((y0<=y1)&&(y0<=bl->y)&&(bl->y<=y1) || (y0>=y1)&&(y0>=bl->y)&&(bl->y>=y1)) )
+ bl_list[bl_list_count++]=bl;
+ }
+ }//end for mobs
+ }
+ }
+ }//end for index
+
+ if(bl_list_count>=BL_LIST_MAX) {
+ if(battle_config.error_log)
+ printf("map_foreachinarea: *WARNING* block count too many!\n");
+ }
+
+ va_start(ap,type);
+ map_freeblock_lock(); // ̉֎~
+
+ for(i=blockcount;i<bl_list_count;i++)
+ if(bl_list[i]->prev) // L?ǂ`FbN
+ func(bl_list[i],ap);
+
+ map_freeblock_unlock(); // ‚
+ va_end(ap);
+
+ bl_list_count = blockcount;
}
/*==========================================