Use the One Makefile to build them all

This changes the names of the built binaries:
    login-server    ->  tmwa-login
    char-server     ->  tmwa-char
    map-server      ->  tmwa-map
    ladmin          ->  tmwa-admin
    eathena-monitor ->  tmwa-monitor

It also gets rid of the 'deps.make' file.

2 files changed, 0 insertions, 2879 deletions

diff --git a/src/ladmin/GNUmakefile b/src/ladmin/GNUmakefile
deleted file mode 100644
index d44f89d..0000000
--- a/src/ladmin/GNUmakefile
+++ /dev/null
@@ -1,7 +0,0 @@
-.SUFFIXES:
-all:
-	${MAKE} -C ../.. ladmin
-clean:
-	rm -r ../../obj/ladmin/
-%::
-	${MAKE} -C ../.. obj/ladmin/$@
diff --git a/src/ladmin/ladmin.cpp b/src/ladmin/ladmin.cpp
deleted file mode 100644
index e0860b2..0000000
--- a/src/ladmin/ladmin.cpp
+++ /dev/null
@@ -1,2872 +0,0 @@
-#include <arpa/inet.h>
-
-#include <netdb.h>
-#include <unistd.h>
-
-#include <cassert>
-
-#include <fstream>
-#include <iostream>
-
-#include "../common/core.hpp"
-#include "../common/cxxstdio.hpp"
-#include "../common/human_time_diff.hpp"
-#include "../common/io.hpp"
-#include "../common/md5calc.hpp"
-#include "../common/mmo.hpp"
-#include "../common/socket.hpp"
-#include "../common/utils.hpp"
-#include "../common/version.hpp"
-
-#include "../poison.hpp"
-
-#define LADMIN_CONF_NAME        "conf/ladmin_athena.conf"
-
-static
-int eathena_interactive_session;
-#define Iprintf if (eathena_interactive_session) PRINTF
-
-//-------------------------------INSTRUCTIONS------------------------------
-// Set the variables below:
-//   IP of the login server.
-//   Port where the login-server listens incoming packets.
-//   Password of administration (same of config_athena.conf).
-// IMPORTANT:
-//   Be sure that you authorize remote administration in login-server
-//   (see login_athena.conf, 'admin_state' parameter)
-//-------------------------------------------------------------------------
-static
-IP4Address login_ip = IP4_LOCALHOST;   // IP of login-server
-static
-int login_port = 6900;    // Port of login-server
-static
-AccountPass admin_pass = stringish<AccountPass>("admin");    // Administration password
-static
-FString ladmin_log_filename = "log/ladmin.log";
-//-------------------------------------------------------------------------
-//  LIST of COMMANDs that you can type at the prompt:
-//    To use these commands you can only type only the first letters.
-//    You must type a minimum of letters (you can not type 'a',
-//      because ladmin doesn't know if it's for 'aide' or for 'add')
-//    <Example> q <= quit, li <= list, pass <= passwd, etc.
-//
-//  Note: every time you must give a account_name, you can use "" or '' (spaces can be included)
-//
-//  help/?
-//    Display the description of the commands
-//  help/? [command]
-//    Display the description of the specified command
-//
-//  add <account_name> <sex> <password>
-//    Create an account with the default email (a@a.com).
-//    Concerning the sex, only the first letter is used (F or M).
-//    The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.
-//    When the password is omitted, the input is done without displaying of the pressed keys.
-//    <example> add testname Male testpass
-//
-//  ban/banish yyyy/mm/dd hh:mm:ss <account name>
-//    Changes the final date of a banishment of an account.
-//    Like banset, but <account name> is at end.
-//
-//  banadd <account_name> <modifier>
-//    Adds or substracts time from the final date of a banishment of an account.
-//    Modifier is done as follows:
-//      Adjustment value (-1, 1, +1, etc...)
-//      Modified element:
-//        a or y: year
-//        m:  month
-//        j or d: day
-//        h:  hour
-//        mn: minute
-//        s:  second
-//    <example> banadd testname +1m-2mn1s-6y
-//              this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
-//  NOTE: If you modify the final date of a non-banished account,
-//        you fix the final date to (actual time +- adjustments)
-//
-//  banset <account_name> yyyy/mm/dd [hh:mm:ss]
-//    Changes the final date of a banishment of an account.
-//    Default time [hh:mm:ss]: 23:59:59.
-//  banset <account_name> 0
-//    Set a non-banished account (0 = unbanished).
-//
-//  block <account name>
-//    Set state 5 (You have been blocked by the GM Team) to an account.
-//    Like state <account name> 5.
-//
-//  check <account_name> <password>
-//    Check the validity of a password for an account
-//    NOTE: Server will never sends back a password.
-//          It's the only method you have to know if a password is correct.
-//          The other method is to have a ('physical') access to the accounts file.
-//
-//  create <account_name> <sex> <email> <password>
-//    Like the 'add' command, but with e-mail moreover.
-//    <example> create testname Male my@mail.com testpass
-//
-//  del <account name>
-//    Remove an account.
-//    This order requires confirmation. After confirmation, the account is deleted.
-//
-//  email <account_name> <email>
-//    Modify the e-mail of an account.
-//
-//  getcount
-//    Give the number of players online on all char-servers.
-//
-//  gm <account_name> [GM_level]
-//    Modify the GM level of an account.
-//    Default value remove GM level (GM level = 0).
-//    <example> gm testname 80
-//
-//  id <account name>
-//    Give the id of an account.
-//
-//  info <account_id>
-//    Display complete information of an account.
-//
-//  kami <message>
-//    Sends a broadcast message on all map-server (in yellow).
-//  kamib <message>
-//    Sends a broadcast message on all map-server (in blue).
-//
-//  list/ls [start_id [end_id]]
-//    Display a list of accounts.
-//    'start_id', 'end_id': indicate end and start identifiers.
-//    Research by name is not possible with this command.
-//    <example> list 10 9999999
-//
-//  listBan/lsBan [start_id [end_id]]
-//    Like list/ls, but only for accounts with state or banished
-//
-//  listGM/lsGM [start_id [end_id]]
-//    Like list/ls, but only for GM accounts
-//
-//  listOK/lsOK [start_id [end_id]]
-//    Like list/ls, but only for accounts without state and not banished
-//
-//  memo <account_name> <memo>
-//    Modify the memo of an account.
-//    'memo': it can have until 253 characters (with spaces or not).
-//
-//  name <account_id>
-//    Give the name of an account.
-//
-//  passwd <account_name> <new_password>
-//    Change the password of an account.
-//    When new password is omitted, the input is done without displaying of the pressed keys.
-//
-//  quit/end/exit
-//    End of the program of administration
-//
-//  reloadGM
-//    Reload GM configuration file
-//
-//  search <expression>
-//    Seek accounts.
-//    Displays the accounts whose names correspond.
-//  search -r/-e/--expr/--regex <expression>
-//    Seek accounts by regular expression.
-//    Displays the accounts whose names correspond.
-//
-//  sex <account_name> <sex>
-//    Modify the sex of an account.
-//    <example> sex testname Male
-//
-//  state <account_name> <new_state> <error_message_#7>
-//    Change the state of an account.
-//    'new_state': state is the state of the packet 0x006a + 1. The possibilities are:
-//                 0 = Account ok            6 = Your Game's EXE file is not the latest version
-//                 1 = Unregistered ID       7 = You are Prohibited to log in until %s
-//                 2 = Incorrect Password    8 = Server is jammed due to over populated
-//                 3 = This ID is expired    9 = No MSG
-//                 4 = Rejected from Server  100 = This ID has been totally erased
-//                 5 = You have been blocked by the GM Team
-//                 all other values are 'No MSG', then use state 9 please.
-//    'error_message_#7': message of the code error 6 = Your are Prohibited to log in until %s (packet 0x006a)
-//
-//  timeadd <account_name> <modifier>
-//    Adds or substracts time from the validity limit of an account.
-//    Modifier is done as follows:
-//      Adjustment value (-1, 1, +1, etc...)
-//      Modified element:
-//        a or y: year
-//        m:  month
-//        j or d: day
-//        h:  hour
-//        mn: minute
-//        s:  second
-//    <example> timeadd testname +1m-2mn1s-6y
-//              this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
-//  NOTE: You can not modify a unlimited validity limit.
-//        If you want modify it, you want probably create a limited validity limit.
-//        So, at first, you must set the validity limit to a date/time.
-//
-//  timeset <account_name> yyyy/mm/dd [hh:mm:ss]
-//    Changes the validity limit of an account.
-//    Default time [hh:mm:ss]: 23:59:59.
-//  timeset <account_name> 0
-//    Gives an unlimited validity limit (0 = unlimited).
-//
-//  unban/unbanish <account name>
-//    Unban an account.
-//    Like banset <account name> 0.
-//
-//  unblock <account name>
-//    Set state 0 (Account ok) to an account.
-//    Like state <account name> 0.
-//
-//  version
-//    Display the version of the login-server.
-//
-//  who <account name>
-//    Displays complete information of an account.
-//
-//-------------------------------------------------------------------------
-static
-int login_fd;
-static
-int bytes_to_read = 0;         // flag to know if we waiting bytes from login-server
-static
-TString parameters; // needs to be global since it's passed to the parse function
-// really should be added to session data
-static
-int list_first, list_last, list_type, list_count;  // parameter to display a list of accounts
-static
-int already_exit_function = 0; // sometimes, the exit function is called twice... so, don't log twice the message
-
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wmissing-noreturn"
-void SessionDeleter::operator()(SessionData *)
-{
-    assert(false && "ladmin does not have sessions");
-}
-#pragma GCC diagnostic pop
-
-//------------------------------
-// Writing function of logs file
-//------------------------------
-#define LADMIN_LOG(fmt, ...)    \
-    ladmin_log(STRPRINTF(fmt, ## __VA_ARGS__))
-static
-void ladmin_log(XString line)
-{
-    FILE *logfp = fopen(ladmin_log_filename.c_str(), "a");
-    if (!logfp)
-        return;
-    log_with_timestamp(logfp, line);
-    fclose(logfp);
-}
-
-static
-bool qsplit(ZString src)
-{
-    return !src;
-}
-
-template<class F, class... R>
-static
-bool qsplit(ZString src, F first, R... rest)
-{
-    if (!src)
-        return false;
-    XString one;
-    if (src.startswith('\''))
-    {
-        src = src.xslice_t(1);
-        auto it = std::find(src.begin(), src.end(), '\'');
-        if (it == src.end())
-            return false;
-        one = src.xislice_h(it);
-        src = src.xislice_t(it + 1);
-        while (src.startswith(' '))
-            src = src.xslice_t(1);
-    }
-    else if (src.startswith('"'))
-    {
-        src = src.xslice_t(1);
-        auto it = std::find(src.begin(), src.end(), '"');
-        if (it == src.end())
-            return false;
-        one = src.xislice_h(it);
-        src = src.xislice_t(it + 1);
-        while (src.startswith(' '))
-            src = src.xslice_t(1);
-    }
-    else
-    {
-        auto it = std::find(src.begin(), src.end(), ' ');
-        one = src.xislice_h(it);
-        src = src.xislice_t(it);
-        while (src.startswith(' '))
-            src = src.xslice_t(1);
-    }
-    return extract(one, first) && qsplit(src, rest...);
-}
-
-//-----------------------------------------
-// Sub-function: Display commands of ladmin
-//-----------------------------------------
-static
-void display_help(ZString param)
-{
-    XString command = param.xislice_h(std::find(param.begin(), param.end(), ' '));
-
-    if (command.startswith('?'))
-        command = "help";
-
-    LADMIN_LOG("Displaying of the commands or a command.\n");
-
-    if (command == "help")
-    {
-        PRINTF("help/?\n");
-        PRINTF("  Display the description of the commands\n");
-        PRINTF("help/? [command]\n");
-        PRINTF("  Display the description of the specified command\n");
-    }
-    else if (command == "add")
-    {
-        PRINTF("add <account_name> <sex> <password>\n");
-        PRINTF("  Create an account with the default email (a@a.com).\n");
-        PRINTF("  Concerning the sex, only the first letter is used (F or M).\n");
-        PRINTF("  The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.\n");
-        PRINTF("  When the password is omitted,\n");
-        PRINTF("  the input is done without displaying of the pressed keys.\n");
-        PRINTF("  <example> add testname Male testpass\n");
-    }
-    else if (command == "ban")
-    {
-        PRINTF("ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
-        PRINTF("  Changes the final date of a banishment of an account.\n");
-        PRINTF("  Like banset, but <account name> is at end.\n");
-    }
-    else if (command == "banadd")
-    {
-        PRINTF("banadd <account_name> <modifier>\n");
-        PRINTF("  Adds or substracts time from the final date of a banishment of an account.\n");
-        PRINTF("  Modifier is done as follows:\n");
-        PRINTF("    Adjustment value (-1, 1, +1, etc...)\n");
-        PRINTF("    Modified element:\n");
-        PRINTF("      a or y: year\n");
-        PRINTF("      m:  month\n");
-        PRINTF("      j or d: day\n");
-        PRINTF("      h:  hour\n");
-        PRINTF("      mn: minute\n");
-        PRINTF("      s:  second\n");
-        PRINTF("  <example> banadd testname +1m-2mn1s-6y\n");
-        PRINTF("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
-        PRINTF("            and 6 years at the same time.\n");
-        PRINTF("NOTE: If you modify the final date of a non-banished account,\n");
-        PRINTF("      you fix the final date to (actual time +- adjustments)\n");
-    }
-    else if (command == "banset")
-    {
-        PRINTF("banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-        PRINTF("  Changes the final date of a banishment of an account.\n");
-        PRINTF("  Default time [hh:mm:ss]: 23:59:59.\n");
-        PRINTF("banset <account_name> 0\n");
-        PRINTF("  Set a non-banished account (0 = unbanished).\n");
-    }
-    else if (command == "block")
-    {
-        PRINTF("block <account name>\n");
-        PRINTF("  Set state 5 (You have been blocked by the GM Team) to an account.\n");
-        PRINTF("  This command works like state <account_name> 5.\n");
-    }
-    else if (command == "check")
-    {
-        PRINTF("check <account_name> <password>\n");
-        PRINTF("  Check the validity of a password for an account.\n");
-        PRINTF("  NOTE: Server will never sends back a password.\n");
-        PRINTF("        It's the only method you have to know if a password is correct.\n");
-        PRINTF("        The other method is to have a ('physical') access to the accounts file.\n");
-    }
-    else if (command == "create")
-    {
-        PRINTF("create <account_name> <sex> <email> <password>\n");
-        PRINTF("  Like the 'add' command, but with e-mail moreover.\n");
-        PRINTF("  <example> create testname Male my@mail.com testpass\n");
-    }
-    else if (command == "delete")
-    {
-        PRINTF("del <account name>\n");
-        PRINTF("  Remove an account.\n");
-        PRINTF("  This order requires confirmation. After confirmation, the account is deleted.\n");
-    }
-    else if (command == "email")
-    {
-        PRINTF("email <account_name> <email>\n");
-        PRINTF("  Modify the e-mail of an account.\n");
-    }
-    else if (command == "getcount")
-    {
-        PRINTF("getcount\n");
-        PRINTF("  Give the number of players online on all char-servers.\n");
-    }
-    else if (command == "gm")
-    {
-        PRINTF("gm <account_name> [GM_level]\n");
-        PRINTF("  Modify the GM level of an account.\n");
-        PRINTF("  Default value remove GM level (GM level = 0).\n");
-        PRINTF("  <example> gm testname 80\n");
-    }
-    else if (command == "id")
-    {
-        PRINTF("id <account name>\n");
-        PRINTF("  Give the id of an account.\n");
-    }
-    else if (command == "info")
-    {
-        PRINTF("info <account_id>\n");
-        PRINTF("  Display complete information of an account.\n");
-    }
-    else if (command == "kami")
-    {
-        PRINTF("kami <message>\n");
-        PRINTF("  Sends a broadcast message on all map-server (in yellow).\n");
-    }
-    else if (command == "kamib")
-    {
-        PRINTF("kamib <message>\n");
-        PRINTF("  Sends a broadcast message on all map-server (in blue).\n");
-    }
-    else if (command == "list")
-    {
-        PRINTF("list/ls [start_id [end_id]]\n");
-        PRINTF("  Display a list of accounts.\n");
-        PRINTF("  'start_id', 'end_id': indicate end and start identifiers.\n");
-        PRINTF("  Research by name is not possible with this command.\n");
-        PRINTF("  <example> list 10 9999999\n");
-    }
-    else if (command == "itemfrob")
-    {
-        PRINTF("itemfrob <source-id> <dest-id>\n");
-        PRINTF("  Translates item IDs for all accounts.\n");
-        PRINTF("  Any items matching the source item ID will be mapped to the dest-id.\n");
-        PRINTF("  <example> itemfrob 500 700\n");
-    }
-    else if (command == "listban")
-    {
-        PRINTF("listBan/lsBan [start_id [end_id]]\n");
-        PRINTF("  Like list/ls, but only for accounts with state or banished.\n");
-    }
-    else if (command == "listgm")
-    {
-        PRINTF("listGM/lsGM [start_id [end_id]]\n");
-        PRINTF("  Like list/ls, but only for GM accounts.\n");
-    }
-    else if (command == "listok")
-    {
-        PRINTF("listOK/lsOK [start_id [end_id]]\n");
-        PRINTF("  Like list/ls, but only for accounts without state and not banished.\n");
-    }
-    else if (command == "memo")
-    {
-        PRINTF("memo <account_name> <memo>\n");
-        PRINTF("  Modify the memo of an account.\n");
-        PRINTF("  'memo': it can have until 253 characters (with spaces or not).\n");
-    }
-    else if (command == "name")
-    {
-        PRINTF("name <account_id>\n");
-        PRINTF("  Give the name of an account.\n");
-    }
-    else if (command == "password")
-    {
-        PRINTF("passwd <account_name> <new_password>\n");
-        PRINTF("  Change the password of an account.\n");
-        PRINTF("  When new password is omitted,\n");
-        PRINTF("  the input is done without displaying of the pressed keys.\n");
-    }
-    else if (command == "reloadgm")
-    {
-        PRINTF("reloadGM\n");
-        PRINTF("  Reload GM configuration file\n");
-    }
-    else if (command == "search")
-    {
-        PRINTF("search <expression>\n");
-        PRINTF("  Seek accounts.\n");
-        PRINTF("  Displays the accounts whose names correspond.\n");
-    }
-    else if (command == "sex")
-    {
-        PRINTF("sex <account_name> <sex>\n");
-        PRINTF("  Modify the sex of an account.\n");
-        PRINTF("  <example> sex testname Male\n");
-    }
-    else if (command == "state")
-    {
-        PRINTF("state <account_name> <new_state> <error_message_#7>\n");
-        PRINTF("  Change the state of an account.\n");
-        PRINTF("  'new_state': state is the state of the packet 0x006a + 1.\n");
-        PRINTF("               The possibilities are:\n");
-        PRINTF("               0 = Account ok\n");
-        PRINTF("               1 = Unregistered ID\n");
-        PRINTF("               2 = Incorrect Password\n");
-        PRINTF("               3 = This ID is expired\n");
-        PRINTF("               4 = Rejected from Server\n");
-        PRINTF("               5 = You have been blocked by the GM Team\n");
-        PRINTF("               6 = Your Game's EXE file is not the latest version\n");
-        PRINTF("               7 = You are Prohibited to log in until...\n");
-        PRINTF("               8 = Server is jammed due to over populated\n");
-        PRINTF("               9 = No MSG\n");
-        PRINTF("               100 = This ID has been totally erased\n");
-        PRINTF("               all other values are 'No MSG', then use state 9 please.\n");
-        PRINTF("  'error_message_#7': message of the code error 6\n");
-        PRINTF("                      = Your are Prohibited to log in until... (packet 0x006a)\n");
-    }
-    else if (command == "timeadd")
-    {
-        PRINTF("timeadd <account_name> <modifier>\n");
-        PRINTF("  Adds or substracts time from the validity limit of an account.\n");
-        PRINTF("  Modifier is done as follows:\n");
-        PRINTF("    Adjustment value (-1, 1, +1, etc...)\n");
-        PRINTF("    Modified element:\n");
-        PRINTF("      a or y: year\n");
-        PRINTF("      m:  month\n");
-        PRINTF("      j or d: day\n");
-        PRINTF("      h:  hour\n");
-        PRINTF("      mn: minute\n");
-        PRINTF("      s:  second\n");
-        PRINTF("  <example> timeadd testname +1m-2mn1s-6y\n");
-        PRINTF("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
-        PRINTF("            and 6 years at the same time.\n");
-        PRINTF("NOTE: You can not modify a unlimited validity limit.\n");
-        PRINTF("      If you want modify it, you want probably create a limited validity limit.\n");
-        PRINTF("      So, at first, you must set the validity limit to a date/time.\n");
-    }
-    else if (command == "timeadd")
-    {
-        PRINTF("timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-        PRINTF("  Changes the validity limit of an account.\n");
-        PRINTF("  Default time [hh:mm:ss]: 23:59:59.\n");
-        PRINTF("timeset <account_name> 0\n");
-        PRINTF("  Gives an unlimited validity limit (0 = unlimited).\n");
-    }
-    else if (command == "unban")
-    {
-        PRINTF("unban/unbanish <account name>\n");
-        PRINTF("  Remove the banishment of an account.\n");
-        PRINTF("  This command works like banset <account_name> 0.\n");
-    }
-    else if (command == "unblock")
-    {
-        PRINTF("unblock <account name>\n");
-        PRINTF("  Set state 0 (Account ok) to an account.\n");
-        PRINTF("  This command works like state <account_name> 0.\n");
-    }
-    else if (command == "version")
-    {
-        PRINTF("version\n");
-        PRINTF("  Display the version of the login-server.\n");
-    }
-    else if (command == "who")
-    {
-        PRINTF("who <account name>\n");
-        PRINTF("  Displays complete information of an account.\n");
-    }
-    else if (command == "quit"
-        || command == "exit"
-        || command == "end")
-    {
-        PRINTF("quit/end/exit\n");
-        PRINTF("  End of the program of administration.\n");
-    }
-    else
-    {
-        if (command)
-            PRINTF("Unknown command [%s] for help. Displaying of all commands.\n",
-                 FString(command));
-        PRINTF(" help/?                          -- Display this help\n");
-        PRINTF(" help/? [command]                -- Display the help of the command\n");
-        PRINTF(" add <account_name> <sex> <password>  -- Create an account with default email\n");
-        PRINTF(" ban/banish yyyy/mm/dd hh:mm:ss <account name> -- Change final date of a ban\n");
-        PRINTF(" banadd/ba <account_name> <modifier>  -- Add or substract time from the final\n");
-        PRINTF("   example: ba apple +1m-2mn1s-2y        date of a banishment of an account\n");
-        PRINTF(" banset/bs <account_name> yyyy/mm/dd [hh:mm:ss] -- Change final date of a ban\n");
-        PRINTF(" banset/bs <account_name> 0           -- Un-banish an account\n");
-        PRINTF(" block <account name>     -- Set state 5 (blocked by the GM Team) to an account\n");
-        PRINTF(" check <account_name> <password>      -- Check the validity of a password\n");
-        PRINTF(" create <account_name> <sex> <email> <passwrd> -- Create an account with email\n");
-        PRINTF(" del <account name>                   -- Remove an account\n");
-        PRINTF(" email <account_name> <email>         -- Modify an email of an account\n");
-        PRINTF(" getcount                             -- Give the number of players online\n");
-        PRINTF(" gm <account_name> [GM_level]         -- Modify the GM level of an account\n");
-        PRINTF(" id <account name>                    -- Give the id of an account\n");
-        PRINTF(" info <account_id>                    -- Display all information of an account\n");
-        PRINTF(" itemfrob <source-id> <dest-id>       -- Map all items from one item ID to another\n");
-        PRINTF(" kami <message>                       -- Sends a broadcast message (in yellow)\n");
-        PRINTF(" kamib <message>                      -- Sends a broadcast message (in blue)\n");
-        PRINTF(" list/ls [First_id [Last_id]]         -- Display a list of accounts\n");
-        PRINTF(" listBan/lsBan [First_id [Last_id] ]  -- Display a list of accounts\n");
-        PRINTF("                                         with state or banished\n");
-        PRINTF(" listGM/lsGM [First_id [Last_id]]     -- Display a list of GM accounts\n");
-        PRINTF(" listOK/lsOK [First_id [Last_id] ]    -- Display a list of accounts\n");
-        PRINTF("                                         without state and not banished\n");
-        PRINTF(" memo <account_name> <memo>           -- Modify the memo of an account\n");
-        PRINTF(" name <account_id>                    -- Give the name of an account\n");
-        PRINTF(" passwd <account_name> <new_password> -- Change the password of an account\n");
-        PRINTF(" quit/end/exit                        -- End of the program of administation\n");
-        PRINTF(" reloadGM                             -- Reload GM configuration file\n");
-        PRINTF(" search <expression>                  -- Seek accounts\n");
-        PRINTF(" sex <nomcompte> <sexe>               -- Modify the sex of an account\n");
-        PRINTF(" state <account_name> <new_state> <error_message_#7> -- Change the state\n");
-        PRINTF(" timeadd/ta <account_name> <modifier> -- Add or substract time from the\n");
-        PRINTF("   example: ta apple +1m-2mn1s-2y        validity limit of an account\n");
-        PRINTF(" timeset/ts <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit\n");
-        PRINTF(" timeset/ts <account_name> 0          -- Give a unlimited validity limit\n");
-        PRINTF(" unban/unbanish <account name>        -- Remove the banishment of an account\n");
-        PRINTF(" unblock <account name>               -- Set state 0 (Account ok) to an account\n");
-        PRINTF(" version                              -- Gives the version of the login-server\n");
-        PRINTF(" who <account name>                   -- Display all information of an account\n");
-        PRINTF(" who <account name>                   -- Display all information of an account\n");
-        PRINTF(" Note: To use spaces in an account name, type \"<account name>\" (or ').\n");
-    }
-}
-
-//-----------------------------
-// Sub-function: add an account
-//-----------------------------
-static
-void addaccount(ZString param, int emailflag)
-{
-    AccountName name;
-    VString<1> sex_;
-    XString email_;
-    AccountPass password;
-
-    if (emailflag == 0)
-    {
-        // add command
-        if (!qsplit(param, &name, &sex_, &password))
-        {
-            PRINTF("Please input an account name, a sex and a password.\n");
-            PRINTF("<example> add testname Male testpass\n");
-            LADMIN_LOG("Incomplete parameters to create an account ('add' command).\n");
-            return;
-        }
-        email_ = DEFAULT_EMAIL;
-    }
-    else
-    {
-        // 1: create command
-        if (!qsplit(param, &name, &sex_, &email_, &password))
-        {
-            PRINTF("Please input an account name, a sex and a password.\n");
-            PRINTF("<example> create testname Male my@mail.com testpass\n");
-            LADMIN_LOG("Incomplete parameters to create an account ('create' command).\n");
-            return;
-        }
-    }
-    char sex = sex_.front();
-    if (!name.is_print())
-        return;
-
-    if (!XString("MF").contains(sex))
-    {
-        PRINTF("Illegal gender [%c]. Please input M or F.\n", sex);
-        LADMIN_LOG("Illegal gender [%c]. Please input M or F.\n", sex);
-        return;
-    }
-
-    if (!e_mail_check(email_))
-    {
-        PRINTF("Invalid email [%s]. Please input a valid e-mail.\n",
-                FString(email_));
-        LADMIN_LOG("Invalid email [%s]. Please input a valid e-mail.\n",
-                FString(email_));
-        return;
-    }
-    AccountEmail email = stringish<AccountEmail>(email_);
-
-    if (!password.is_print())
-        return;
-
-    LADMIN_LOG("Request to login-server to create an account.\n");
-
-    WFIFOW(login_fd, 0) = 0x7930;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFO_STRING(login_fd, 26, password, 24);
-    WFIFOB(login_fd, 50) = sex;
-    WFIFO_STRING(login_fd, 51, email, 40);
-    WFIFOSET(login_fd, 91);
-    bytes_to_read = 1;
-}
-
-//---------------------------------------------------------------------------------
-// Sub-function: Add/substract time to the final date of a banishment of an account
-//---------------------------------------------------------------------------------
-static
-void banaddaccount(ZString param)
-{
-    AccountName name;
-    HumanTimeDiff modif {};
-
-    if (!qsplit(param, &name, &modif))
-    {
-        PRINTF("Please input an account name and a modifier.\n");
-        PRINTF("  <example>: banadd testname +1m-2mn1s-6y\n");
-        PRINTF("             this example adds 1 month and 1 second, and substracts 2 minutes\n");
-        PRINTF("             and 6 years at the same time.\n");
-        LADMIN_LOG("Incomplete parameters to modify the ban date/time of an account ('banadd' command).\n");
-        return;
-    }
-    if (!name.is_print())
-        return;
-
-    if (!modif)
-    {
-        PRINTF("Please give an adjustment with this command:\n");
-        PRINTF("  Adjustment value (-1, 1, +1, etc...)\n");
-        PRINTF("  Modified element:\n");
-        PRINTF("    a or y: year\n");
-        PRINTF("    m: month\n");
-        PRINTF("    j or d: day\n");
-        PRINTF("    h: hour\n");
-        PRINTF("    mn: minute\n");
-        PRINTF("    s: second\n");
-        PRINTF("  <example> banadd testname +1m-2mn1s-6y\n");
-        PRINTF("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
-        PRINTF("            and 6 years at the same time.\n");
-        LADMIN_LOG("No adjustment isn't an adjustment ('banadd' command).\n");
-        return;
-    }
-
-    LADMIN_LOG("Request to login-server to modify a ban date/time.\n");
-
-    WFIFOW(login_fd, 0) = 0x794c;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFO_STRUCT(login_fd, 26, modif);
-    WFIFOSET(login_fd, 38);
-    bytes_to_read = 1;
-}
-
-//-----------------------------------------------------------------------
-// Sub-function of sub-function banaccount, unbanaccount or bansetaccount
-// Set the final date of a banishment of an account
-//-----------------------------------------------------------------------
-static
-void bansetaccountsub(AccountName name, XString date, XString time_)
-{
-    int year, month, day, hour, minute, second;
-    year = month = day = hour = minute = second = 0;
-
-    // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban)
-    TimeT ban_until_time = TimeT();
-    struct tm tmtime = ban_until_time;   // initialize
-
-    if (!name.is_print())
-        return;
-
-    if (date != "0"
-        && ((!extract(date, record<'/'>(&year, &month, &day))
-                && !extract(date, record<'-'>(&year, &month, &day))
-                && !extract(date, record<'.'>(&year, &month, &day)))
-            || !extract(time_, record<':'>(&hour, &minute, &second))))
-    {
-        PRINTF("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n");
-        PRINTF("You can imput 0 instead of if you use 'banset' command.\n");
-        LADMIN_LOG("Invalid format for the date/time ('banset' or 'ban' command).\n");
-        return;
-    }
-
-    if (date == "0")
-    {
-        ban_until_time = TimeT();
-    }
-    else
-    {
-        if (year < 70)
-        {
-            year = year + 100;
-        }
-        if (year >= 1900)
-        {
-            year = year - 1900;
-        }
-        if (month < 1 || month > 12)
-        {
-            PRINTF("Please give a correct value for the month (from 1 to 12).\n");
-            LADMIN_LOG("Invalid month for the date ('banset' or 'ban' command).\n");
-            return;
-        }
-        month = month - 1;
-        if (day < 1 || day > 31)
-        {
-            PRINTF("Please give a correct value for the day (from 1 to 31).\n");
-            LADMIN_LOG("Invalid day for the date ('banset' or 'ban' command).\n");
-            return;
-        }
-        if (((month == 3 || month == 5 || month == 8 || month == 10)
-             && day > 30) || (month == 1 && day > 29))
-        {
-            PRINTF("Please give a correct value for a day of this month (%d).\n",
-                 month);
-            LADMIN_LOG("Invalid day for this month ('banset' or 'ban' command).\n");
-            return;
-        }
-        if (hour < 0 || hour > 23)
-        {
-            PRINTF("Please give a correct value for the hour (from 0 to 23).\n");
-            LADMIN_LOG("Invalid hour for the time ('banset' or 'ban' command).\n");
-            return;
-        }
-        if (minute < 0 || minute > 59)
-        {
-            PRINTF("Please give a correct value for the minutes (from 0 to 59).\n");
-            LADMIN_LOG("Invalid minute for the time ('banset' or 'ban' command).\n");
-            return;
-        }
-        if (second < 0 || second > 59)
-        {
-            PRINTF("Please give a correct value for the seconds (from 0 to 59).\n");
-            LADMIN_LOG("Invalid second for the time ('banset' or 'ban' command).\n");
-            return;
-        }
-        tmtime.tm_year = year;
-        tmtime.tm_mon = month;
-        tmtime.tm_mday = day;
-        tmtime.tm_hour = hour;
-        tmtime.tm_min = minute;
-        tmtime.tm_sec = second;
-        tmtime.tm_isdst = -1;  // -1: no winter/summer time modification
-        ban_until_time = tmtime;
-        if (ban_until_time.error())
-        {
-            PRINTF("Invalid date.\n");
-            PRINTF("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n");
-            PRINTF("You can imput 0 instead of if you use 'banset' command.\n");
-            LADMIN_LOG("Invalid date. ('banset' or 'ban' command).\n");
-            return;
-        }
-    }
-
-    LADMIN_LOG("Request to login-server to set a ban.\n");
-
-    WFIFOW(login_fd, 0) = 0x794a;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFOL(login_fd, 26) = static_cast<time_t>(ban_until_time);
-    WFIFOSET(login_fd, 30);
-    bytes_to_read = 1;
-}
-
-//---------------------------------------------------------------------
-// Sub-function: Set the final date of a banishment of an account (ban)
-//---------------------------------------------------------------------
-static
-void banaccount(ZString param)
-{
-    AccountName name;
-    XString date;
-    XString time_;
-
-    if (!qsplit(param, &date, &time_, &name))
-    {
-        PRINTF("Please input an account name, a date and a hour.\n");
-        PRINTF("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-        PRINTF("           banset <account_name> 0   (0 = un-banished)\n");
-        PRINTF("           ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
-        PRINTF("           unban/unbanish <account name>\n");
-        PRINTF("           Default time [hh:mm:ss]: 23:59:59.\n");
-        LADMIN_LOG("Incomplete parameters to set a ban ('banset' or 'ban' command).\n");
-        return;
-    }
-
-    if (!time_)
-        time_ = "23:59:59";
-
-    bansetaccountsub(name, date, time_);
-}
-
-//------------------------------------------------------------------------
-// Sub-function: Set the final date of a banishment of an account (banset)
-//------------------------------------------------------------------------
-static
-void bansetaccount(ZString param)
-{
-    AccountName name;
-    XString date;
-    XString time_;
-
-    if (!qsplit(param, &name, &date, &time_)
-            && !qsplit(param, &name, &date))
-    {
-        PRINTF("Please input an account name, a date and a hour.\n");
-        PRINTF("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-        PRINTF("           banset <account_name> 0   (0 = un-banished)\n");
-        PRINTF("           ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
-        PRINTF("           unban/unbanish <account name>\n");
-        PRINTF("           Default time [hh:mm:ss]: 23:59:59.\n");
-        LADMIN_LOG("Incomplete parameters to set a ban ('banset' or 'ban' command).\n");
-        return;
-    }
-
-    if (!time_)
-        time_ = "23:59:59";
-
-    bansetaccountsub(name, date, time_);
-}
-
-//-------------------------------------------------
-// Sub-function: unbanishment of an account (unban)
-//-------------------------------------------------
-static
-void unbanaccount(ZString param)
-{
-    AccountName name;
-
-    if (!qsplit(param, &name))
-    {
-        PRINTF("Please input an account name.\n");
-        PRINTF("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-        PRINTF("           banset <account_name> 0   (0 = un-banished)\n");
-        PRINTF("           ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
-        PRINTF("           unban/unbanish <account name>\n");
-        PRINTF("           Default time [hh:mm:ss]: 23:59:59.\n");
-        LADMIN_LOG("Incomplete parameters to set a ban ('unban' command).\n");
-        return;
-    }
-
-    bansetaccountsub(name, "0", "");
-}
-
-//---------------------------------------------------------
-// Sub-function: Asking to check the validity of a password
-// (Note: never send back a password with login-server!! security of passwords)
-//---------------------------------------------------------
-static
-void checkaccount(ZString param)
-{
-    AccountName name;
-    AccountPass password;
-
-    if (!qsplit(param, &name, &password))
-    {
-        PRINTF("Please input an account name.\n");
-        PRINTF("<example> check testname password\n");
-        LADMIN_LOG("Incomplete parameters to check the password of an account ('check' command).\n");
-        return;
-    }
-
-    if (!name.is_print())
-        return;
-
-    if (!password.is_print())
-        return;
-
-    LADMIN_LOG("Request to login-server to check a password.\n");
-
-    WFIFOW(login_fd, 0) = 0x793a;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFO_STRING(login_fd, 26, password, 24);
-    WFIFOSET(login_fd, 50);
-    bytes_to_read = 1;
-}
-
-//------------------------------------------------
-// Sub-function: Asking for deletion of an account
-//------------------------------------------------
-static
-void delaccount(ZString param)
-{
-    AccountName name;
-
-    if (!qsplit(param, &name))
-    {
-        PRINTF("Please input an account name.\n");
-        PRINTF("<example> del testnametodelete\n");
-        LADMIN_LOG("No name given to delete an account ('delete' command).\n");
-        return;
-    }
-
-    if (!name.is_print())
-        return;
-
-    char confirm;
-    do
-    {
-        PRINTF("\033[1;36m ** Are you really sure to DELETE account [%s]? (y/n) > \033[0m", name);
-        fflush(stdout);
-        int seek = getchar();
-        confirm = seek;
-        if (seek == EOF)
-            confirm = 'n';
-        else
-            while (seek != '\n' && seek != EOF)
-                seek = getchar();
-    }
-    while (!XString("yn").contains(confirm));
-
-    if (confirm == 'n')
-    {
-        PRINTF("Deletion canceled.\n");
-        LADMIN_LOG("Deletion canceled by user ('delete' command).\n");
-        return;
-    }
-
-    LADMIN_LOG("Request to login-server to delete an acount.\n");
-
-    WFIFOW(login_fd, 0) = 0x7932;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFOSET(login_fd, 26);
-    bytes_to_read = 1;
-}
-
-//----------------------------------------------------------
-// Sub-function: Asking to modification of an account e-mail
-//----------------------------------------------------------
-static
-void changeemail(ZString param)
-{
-    AccountName name;
-    XString email_;
-    if (!qsplit(param, &name, &email_))
-    {
-        PRINTF("Please input an account name and an email.\n");
-        PRINTF("<example> email testname newemail\n");
-        LADMIN_LOG("Incomplete parameters to change the email of an account ('email' command).\n");
-        return;
-    }
-
-    if (!name.is_print())
-        return;
-
-    if (!e_mail_check(email_))
-    {
-        PRINTF("Invalid email [%s]. Please input a valid e-mail.\n",
-                FString(email_));
-        LADMIN_LOG("Invalid email [%s]. Please input a valid e-mail.\n",
-                FString(email_));
-        return;
-    }
-    AccountEmail email = stringish<AccountEmail>(email_);
-
-    LADMIN_LOG("Request to login-server to change an email.\n");
-
-    WFIFOW(login_fd, 0) = 0x7940;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFO_STRING(login_fd, 26, email, 40);
-    WFIFOSET(login_fd, 66);
-    bytes_to_read = 1;
-}
-
-//-----------------------------------------------------
-// Sub-function: Asking of the number of online players
-//-----------------------------------------------------
-static
-void getlogincount(void)
-{
-    LADMIN_LOG("Request to login-server to obtain the # of online players.\n");
-
-    WFIFOW(login_fd, 0) = 0x7938;
-    WFIFOSET(login_fd, 2);
-    bytes_to_read = 1;
-}
-
-//----------------------------------------------------------
-// Sub-function: Asking to modify the GM level of an account
-//----------------------------------------------------------
-static
-void changegmlevel(ZString param)
-{
-    AccountName name;
-    int GM_level = 0;
-
-    if (!qsplit(param, &name, &GM_level))
-    {
-        PRINTF("Please input an account name and a GM level.\n");
-        PRINTF("<example> gm testname 80\n");
-        LADMIN_LOG("Incomplete parameters to change the GM level of an account ('gm' command).\n");
-        return;
-    }
-
-    if (!name.is_print())
-        return;
-
-    if (GM_level < 0 || GM_level > 99)
-    {
-        PRINTF("Illegal GM level [%d]. Please input a value from 0 to 99.\n",
-             GM_level);
-        LADMIN_LOG("Illegal GM level [%d]. The value can be from 0 to 99.\n",
-              GM_level);
-        return;
-    }
-
-    LADMIN_LOG("Request to login-server to change a GM level.\n");
-
-    WFIFOW(login_fd, 0) = 0x793e;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFOB(login_fd, 26) = GM_level;
-    WFIFOSET(login_fd, 27);
-    bytes_to_read = 1;
-}
-
-//---------------------------------------------
-// Sub-function: Asking to obtain an account id
-//---------------------------------------------
-static
-void idaccount(ZString param)
-{
-    AccountName name;
-
-    if (!qsplit(param, &name))
-    {
-        PRINTF("Please input an account name.\n");
-        PRINTF("<example> id testname\n");
-        LADMIN_LOG("No name given to search an account id ('id' command).\n");
-        return;
-    }
-
-    if (!name.is_print())
-    {
-        return;
-    }
-
-    LADMIN_LOG("Request to login-server to know an account id.\n");
-
-    WFIFOW(login_fd, 0) = 0x7944;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFOSET(login_fd, 26);
-    bytes_to_read = 1;
-}
-
-//----------------------------------------------------------------------------
-// Sub-function: Asking to displaying information about an account (by its id)
-//----------------------------------------------------------------------------
-static
-void infoaccount(int account_id)
-{
-    if (account_id < 0)
-    {
-        PRINTF("Please input a positive value for the id.\n");
-        LADMIN_LOG("Negative value was given to found the account.\n");
-        return;
-    }
-
-    LADMIN_LOG("Request to login-server to obtain information about an account (by its id).\n");
-
-    WFIFOW(login_fd, 0) = 0x7954;
-    WFIFOL(login_fd, 2) = account_id;
-    WFIFOSET(login_fd, 6);
-    bytes_to_read = 1;
-}
-
-//---------------------------------------
-// Sub-function: Send a broadcast message
-//---------------------------------------
-static
-void sendbroadcast(ZString message)
-{
-    if (!message)
-    {
-        PRINTF("Please input a message.\n");
-        {
-            PRINTF("<example> kami a message\n");
-        }
-        LADMIN_LOG("The message is void ('kami' command).\n");
-        return;
-    }
-
-    WFIFOW(login_fd, 0) = 0x794e;
-    WFIFOW(login_fd, 2) = 0;
-    size_t len = message.size() + 1;
-    WFIFOL(login_fd, 4) = len;
-    WFIFO_STRING(login_fd, 8, message, len);
-    WFIFOSET(login_fd, 8 + len);
-    bytes_to_read = 1;
-}
-
-
-//--------------------------------------------------------
-// Sub-function: Asking to Displaying of the accounts list
-//--------------------------------------------------------
-static
-void listaccount(ZString param, int type)
-{
-//int list_first, list_last, list_type; // parameter to display a list of accounts
-    list_type = type;
-
-    // set default values
-    list_first = 0;
-    list_last = 0;
-
-    if (list_type == 1)
-    {                           // if listgm
-        // get all accounts = use default
-    }
-    else if (list_type == 2)
-    {                           // if search
-        // get all accounts = use default
-    }
-    else if (list_type == 3)
-    {                           // if listban
-        // get all accounts = use default
-    }
-    else if (list_type == 4)
-    {                           // if listok
-        // get all accounts = use default
-    }
-    else
-    {
-        // if list (list_type == 0)
-        extract(param, record<' '>(&list_first, &list_last));
-        if (list_first < 0)
-            list_first = 0;
-        if (list_last < list_first || list_last < 0)
-            list_last = 0;
-    }
-
-    LADMIN_LOG("Request to login-server to obtain the list of accounts from %d to %d.\n",
-          list_first, list_last);
-
-    WFIFOW(login_fd, 0) = 0x7920;
-    WFIFOL(login_fd, 2) = list_first;
-    WFIFOL(login_fd, 6) = list_last;
-    WFIFOSET(login_fd, 10);
-    bytes_to_read = 1;
-
-    //          0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567
-    Iprintf("account_id GM user_name               sex    count state\n");
-    Iprintf("-------------------------------------------------------------------------------\n");
-    list_count = 0;
-}
-
-//--------------------------------------------------------
-// Sub-function: Frobnicate items
-//--------------------------------------------------------
-static
-int itemfrob(ZString param)
-{
-    int source_id, dest_id;
-
-    if (!extract(param, record<' '>(&source_id, &dest_id)))
-    {
-        PRINTF("You must provide the source and destination item IDs.\n");
-        return 1;
-    }
-
-    WFIFOW(login_fd, 0) = 0x7924;
-    WFIFOL(login_fd, 2) = source_id;
-    WFIFOL(login_fd, 6) = dest_id;
-    WFIFOSET(login_fd, 10);
-    bytes_to_read = 1;          // all logging is done to the three main servers
-
-    return 0;
-}
-
-//--------------------------------------------
-// Sub-function: Asking to modify a memo field
-//--------------------------------------------
-static
-void changememo(ZString param)
-{
-    AccountName name;
-    XString memo;
-
-    if (!qsplit(param, &name, &memo) && !qsplit(param, &name))
-    {
-        PRINTF("Please input an account name and a memo.\n");
-        PRINTF("<example> memo testname new memo\n");
-        LADMIN_LOG("Incomplete parameters to change the memo of an account ('email' command).\n");
-        return;
-    }
-
-    if (!name.is_print())
-        return;
-
-    size_t len = memo.size();
-    size_t len1 = len + 1;
-    if (len > 254)
-    {
-        PRINTF("Memo is too long (%zu characters).\n", len);
-        PRINTF("Please input a memo of 254 bytes at the maximum.\n");
-        LADMIN_LOG("Email is too long (%zu characters). Please input a memo of 254 bytes at the maximum.\n",
-              len);
-        return;
-    }
-
-    LADMIN_LOG("Request to login-server to change a memo.\n");
-
-    WFIFOW(login_fd, 0) = 0x7942;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFOW(login_fd, 26) = len1;
-    WFIFO_STRING(login_fd, 28, memo, len);
-    WFIFOSET(login_fd, 28 + len1);
-    bytes_to_read = 1;
-}
-
-//-----------------------------------------------
-// Sub-function: Asking to obtain an account name
-//-----------------------------------------------
-static
-void nameaccount(int id)
-{
-    if (id < 0)
-    {
-        PRINTF("Please input a positive value for the id.\n");
-        LADMIN_LOG("Negativ id given to search an account name ('name' command).\n");
-        return;
-    }
-
-    LADMIN_LOG("Request to login-server to know an account name.\n");
-
-    WFIFOW(login_fd, 0) = 0x7946;
-    WFIFOL(login_fd, 2) = id;
-    WFIFOSET(login_fd, 6);
-    bytes_to_read = 1;
-}
-
-//------------------------------------------
-// Sub-function: Asking to modify a password
-// (Note: never send back a password with login-server!! security of passwords)
-//------------------------------------------
-static
-void changepasswd(ZString param)
-{
-    AccountName name;
-    AccountPass password;
-
-    if (!qsplit(param, &name, &password))
-    {
-        PRINTF("Please input an account name.\n");
-        PRINTF("<example> passwd testname newpassword\n");
-        LADMIN_LOG("Incomplete parameters to change the password of an account ('password' command).\n");
-        return;
-    }
-
-    if (!name.is_print())
-    {
-        return;
-    }
-
-    if (!password.is_print())
-        return;
-
-    LADMIN_LOG("Request to login-server to change a password.\n");
-
-    WFIFOW(login_fd, 0) = 0x7934;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFO_STRING(login_fd, 26, password, 24);
-    WFIFOSET(login_fd, 50);
-    bytes_to_read = 1;
-}
-
-//----------------------------------------------------------------------
-// Sub-function: Request to login-server to reload GM configuration file
-// this function have no answer
-//----------------------------------------------------------------------
-static
-void reloadGM(ZString params)
-{
-    WFIFOW(login_fd, 0) = 0x7955;
-    WFIFOSET(login_fd, 2);
-    bytes_to_read = 0;
-
-    LADMIN_LOG("Request to reload the GM configuration file sended.\n");
-    PRINTF("Request to reload the GM configuration file sended.\n");
-    PRINTF("Check the actual GM accounts (after reloading):\n");
-    listaccount(params, 1);    // 1: to list only GM
-}
-
-//-----------------------------------------------------
-// Sub-function: Asking to modify the sex of an account
-//-----------------------------------------------------
-static
-void changesex(ZString param)
-{
-    AccountName name;
-    VString<1> sex_;
-
-    if (!qsplit(param, &name, &sex_))
-    {
-        PRINTF("Please input an account name and a sex.\n");
-        PRINTF("<example> sex testname Male\n");
-        LADMIN_LOG("Incomplete parameters to change the sex of an account ('sex' command).\n");
-        return;
-    }
-    char sex = sex_.front();
-
-    if (name.is_print())
-    {
-        return;
-    }
-
-    if (!XString("MF").contains(sex))
-    {
-        PRINTF("Illegal gender [%c]. Please input M or F.\n", sex);
-        LADMIN_LOG("Illegal gender [%c]. Please input M or F.\n", sex);
-        return;
-    }
-
-    LADMIN_LOG("Request to login-server to change a sex.\n");
-
-    WFIFOW(login_fd, 0) = 0x793c;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFOB(login_fd, 26) = sex;
-    WFIFOSET(login_fd, 27);
-    bytes_to_read = 1;
-}
-
-//-------------------------------------------------------------------------
-// Sub-function of sub-function changestate, blockaccount or unblockaccount
-// Asking to modify the state of an account
-//-------------------------------------------------------------------------
-static
-void changestatesub(AccountName name, int state, XString error_message)
-{
-    if ((state < 0 || state > 9) && state != 100)
-    {                           // Valid values: 0: ok, or value of the 0x006a packet + 1
-        PRINTF("Please input one of these states:\n");
-        PRINTF("  0 = Account ok            6 = Your Game's EXE file is not the latest version\n");
-        PRINTF("  1 = Unregistered ID       7 = You are Prohibited to log in until + message\n");
-        PRINTF("  2 = Incorrect Password    8 = Server is jammed due to over populated\n");
-        PRINTF("  3 = This ID is expired    9 = No MSG\n");
-        PRINTF("  4 = Rejected from Server  100 = This ID has been totally erased\n");
-        PRINTF("  5 = You have been blocked by the GM Team\n");
-        PRINTF("<examples> state testname 5\n");
-        PRINTF("           state testname 7 end of your ban\n");
-        PRINTF("           block <account name>\n");
-        PRINTF("           unblock <account name>\n");
-        LADMIN_LOG("Invalid value for the state of an account ('state', 'block' or 'unblock' command).\n");
-        return;
-    }
-
-    if (!name.is_print())
-        return;
-
-    if (state != 7)
-    {
-        error_message = "-";
-    }
-    else
-    {
-        if (error_message.size() < 1)
-        {
-            PRINTF("Error message is too short. Please input a message of 1-19 bytes.\n");
-            LADMIN_LOG("Error message is too short. Please input a message of 1-19 bytes.\n");
-            return;
-        }
-        if (error_message.size() > 19)
-        {
-            PRINTF("Error message is too long. Please input a message of 1-19 bytes.\n");
-            LADMIN_LOG("Error message is too long. Please input a message of 1-19 bytes.\n");
-            return;
-        }
-    }
-
-    LADMIN_LOG("Request to login-server to change a state.\n");
-
-    WFIFOW(login_fd, 0) = 0x7936;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFOL(login_fd, 26) = state;
-    WFIFO_STRING(login_fd, 30, error_message, 20);
-    WFIFOSET(login_fd, 50);
-    bytes_to_read = 1;
-}
-
-//-------------------------------------------------------
-// Sub-function: Asking to modify the state of an account
-//-------------------------------------------------------
-static
-void changestate(ZString param)
-{
-    AccountName name;
-    int state;
-    XString error_message;
-
-    if (!qsplit(param, &name, &state, &error_message) && !qsplit(param, &name, &state))
-    {
-        PRINTF("Please input an account name and a state.\n");
-        PRINTF("<examples> state testname 5\n");
-        PRINTF("           state testname 7 end of your ban\n");
-        PRINTF("           block <account name>\n");
-        PRINTF("           unblock <account name>\n");
-        LADMIN_LOG("Incomplete parameters to change the state of an account ('state' command).\n");
-        return;
-    }
-
-    changestatesub(name, state, error_message);
-}
-
-//-------------------------------------------
-// Sub-function: Asking to unblock an account
-//-------------------------------------------
-static
-void unblockaccount(ZString param)
-{
-    AccountName name;
-
-    if (!qsplit(param, &name))
-    {
-        PRINTF("Please input an account name.\n");
-        PRINTF("<examples> state testname 5\n");
-        PRINTF("           state testname 7 end of your ban\n");
-        PRINTF("           block <account name>\n");
-        PRINTF("           unblock <account name>\n");
-        LADMIN_LOG("Incomplete parameters to change the state of an account ('unblock' command).\n");
-        return;
-    }
-
-    changestatesub(name, 0, "-");   // state 0, no error message
-}
-
-//-------------------------------------------
-// Sub-function: Asking to unblock an account
-//-------------------------------------------
-static
-void blockaccount(ZString param)
-{
-    AccountName name;
-
-    if (!qsplit(param, &name))
-    {
-        PRINTF("Please input an account name.\n");
-        PRINTF("<examples> state testname 5\n");
-        PRINTF("           state testname 7 end of your ban\n");
-        PRINTF("           block <account name>\n");
-        PRINTF("           unblock <account name>\n");
-        LADMIN_LOG("Incomplete parameters to change the state of an account ('block' command).\n");
-        return;
-    }
-
-    changestatesub(name, 5, "-");   // state 5, no error message
-}
-
-//---------------------------------------------------------------------
-// Sub-function: Add/substract time to the validity limit of an account
-//---------------------------------------------------------------------
-static
-void timeaddaccount(ZString param)
-{
-    AccountName name;
-    HumanTimeDiff modif {};
-
-    if (!qsplit(param, &name, &modif))
-    {
-        PRINTF("Please input an account name and a modifier.\n");
-        PRINTF("  <example>: timeadd testname +1m-2mn1s-6y\n");
-        PRINTF("             this example adds 1 month and 1 second, and substracts 2 minutes\n");
-        PRINTF("             and 6 years at the same time.\n");
-        LADMIN_LOG("Incomplete parameters to modify a limit time ('timeadd' command).\n");
-        return;
-    }
-    if (name.is_print())
-    {
-        return;
-    }
-
-    if (!modif)
-    {
-        PRINTF("Please give an adjustment with this command:\n");
-        PRINTF("  Adjustment value (-1, 1, +1, etc...)\n");
-        PRINTF("  Modified element:\n");
-        PRINTF("    a or y: year\n");
-        PRINTF("    m:      month\n");
-        PRINTF("    j or d: day\n");
-        PRINTF("    h:      hour\n");
-        PRINTF("    mn:     minute\n");
-        PRINTF("    s:      second\n");
-        PRINTF("  <example> timeadd testname +1m-2mn1s-6y\n");
-        PRINTF("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
-        PRINTF("            and 6 years at the same time.\n");
-        LADMIN_LOG("No adjustment isn't an adjustment ('timeadd' command).\n");
-        return;
-    }
-
-    LADMIN_LOG("Request to login-server to modify a time limit.\n");
-
-    WFIFOW(login_fd, 0) = 0x7950;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFO_STRUCT(login_fd, 26, modif);
-    WFIFOSET(login_fd, 38);
-    bytes_to_read = 1;
-}
-
-//-------------------------------------------------
-// Sub-function: Set a validity limit of an account
-//-------------------------------------------------
-static
-void timesetaccount(ZString param)
-{
-    AccountName name;
-    XString date;
-    XString time_;
-    int year, month, day, hour, minute, second;
-
-    year = month = day = hour = minute = second = 0;
-
-    // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited)
-    TimeT connect_until_time = TimeT();
-    struct tm tmtime = connect_until_time;   // initialize
-
-    if (!qsplit(param, &name, &date, &time_)
-            && !qsplit(param, &name, &date))
-    {
-        PRINTF("Please input an account name, a date and a hour.\n");
-        PRINTF("<example>: timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-        PRINTF("           timeset <account_name> 0   (0 = unlimited)\n");
-        PRINTF("           Default time [hh:mm:ss]: 23:59:59.\n");
-        LADMIN_LOG("Incomplete parameters to set a limit time ('timeset' command).\n");
-        return;
-    }
-    if (!name.is_print())
-        return;
-
-    if (!time_)
-        time_ = "23:59:59";
-
-    if (date != "0"
-        && ((!extract(date, record<'/'>(&year, &month, &day))
-                && !extract(date, record<'-'>(&year, &month, &day))
-                && !extract(date, record<'.'>(&year, &month, &day)))
-            || !extract(time_, record<':'>(&hour, &minute, &second))))
-    {
-        PRINTF("Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n");
-        LADMIN_LOG("Invalid format for the date/time ('timeset' command).\n");
-        return;
-    }
-
-    if (date == "0")
-    {
-        connect_until_time = TimeT();
-    }
-    else
-    {
-        if (year < 70)
-        {
-            year = year + 100;
-        }
-        if (year >= 1900)
-        {
-            year = year - 1900;
-        }
-        if (month < 1 || month > 12)
-        {
-            PRINTF("Please give a correct value for the month (from 1 to 12).\n");
-            LADMIN_LOG("Invalid month for the date ('timeset' command).\n");
-            return;
-        }
-        month = month - 1;
-        if (day < 1 || day > 31)
-        {
-            PRINTF("Please give a correct value for the day (from 1 to 31).\n");
-            LADMIN_LOG("Invalid day for the date ('timeset' command).\n");
-            return;
-        }
-        if (((month == 3 || month == 5 || month == 8 || month == 10)
-             && day > 30) ||(month == 1 && day > 29))
-        {
-            PRINTF("Please give a correct value for a day of this month (%d).\n",
-                 month);
-            LADMIN_LOG("Invalid day for this month ('timeset' command).\n");
-            return;
-        }
-        if (hour < 0 || hour > 23)
-        {
-            PRINTF("Please give a correct value for the hour (from 0 to 23).\n");
-            LADMIN_LOG("Invalid hour for the time ('timeset' command).\n");
-            return;
-        }
-        if (minute < 0 || minute > 59)
-        {
-            PRINTF("Please give a correct value for the minutes (from 0 to 59).\n");
-            LADMIN_LOG("Invalid minute for the time ('timeset' command).\n");
-            return;
-        }
-        if (second < 0 || second > 59)
-        {
-            PRINTF("Please give a correct value for the seconds (from 0 to 59).\n");
-            LADMIN_LOG("Invalid second for the time ('timeset' command).\n");
-            return;
-        }
-        tmtime.tm_year = year;
-        tmtime.tm_mon = month;
-        tmtime.tm_mday = day;
-        tmtime.tm_hour = hour;
-        tmtime.tm_min = minute;
-        tmtime.tm_sec = second;
-        tmtime.tm_isdst = -1;  // -1: no winter/summer time modification
-        connect_until_time = tmtime;
-        if (connect_until_time.error())
-        {
-            PRINTF("Invalid date.\n");
-            PRINTF("Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n");
-            LADMIN_LOG("Invalid date. ('timeset' command).\n");
-            return;
-        }
-    }
-
-    LADMIN_LOG("Request to login-server to set a time limit.\n");
-
-    WFIFOW(login_fd, 0) = 0x7948;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFOL(login_fd, 26) = static_cast<time_t>(connect_until_time);
-    WFIFOSET(login_fd, 30);
-    bytes_to_read = 1;
-}
-
-//------------------------------------------------------------------------------
-// Sub-function: Asking to displaying information about an account (by its name)
-//------------------------------------------------------------------------------
-static
-void whoaccount(ZString param)
-{
-    AccountName name;
-
-    if (!qsplit(param, &name))
-    {
-        PRINTF("Please input an account name.\n");
-        PRINTF("<example> who testname\n");
-        LADMIN_LOG("No name was given to found the account.\n");
-        return;
-    }
-    if (!name.is_print())
-    {
-        return;
-    }
-
-    LADMIN_LOG("Request to login-server to obtain information about an account (by its name).\n");
-
-    WFIFOW(login_fd, 0) = 0x7952;
-    WFIFO_STRING(login_fd, 2, name, 24);
-    WFIFOSET(login_fd, 26);
-    bytes_to_read = 1;
-}
-
-//--------------------------------------------------------
-// Sub-function: Asking of the version of the login-server
-//--------------------------------------------------------
-static
-void checkloginversion(void)
-{
-    LADMIN_LOG("Request to login-server to obtain its version.\n");
-
-    WFIFOW(login_fd, 0) = 0x7530;
-    WFIFOSET(login_fd, 2);
-    bytes_to_read = 1;
-}
-
-//---------------------------------------------
-// Prompt function
-// this function wait until user type a command
-// and analyse the command.
-//---------------------------------------------
-static
-void prompt(void)
-{
-    // while we don't wait new packets
-    while (bytes_to_read == 0)
-    {
-        // for help with the console colors look here:
-        // http://www.edoceo.com/liberum/?doc=PRINTF-with-color
-        // some code explanation (used here):
-        // \033[2J : clear screen and go up/left (0, 0 position)
-        // \033[K  : clear line from actual position to end of the line
-        // \033[0m : reset color parameter
-        // \033[1m : use bold for font
-        Iprintf("\n");
-        Iprintf("\033[32mTo list the commands, type 'enter'.\033[0m\n");
-        Iprintf("\033[0;36mLadmin-> \033[0m");
-        Iprintf("\033[1m");
-        fflush(stdout);
-
-        // get command and parameter
-        FString buf;
-        io::getline(std::cin, buf);
-
-        Iprintf("\033[0m");
-        fflush(stdout);
-
-        if (!std::cin)
-            exit(0);
-
-        if (!buf.is_print())
-        {
-            printf("Cowardly refusing to execute a command that includes control or non-ascii characters\n");
-            LADMIN_LOG("Cowardly refusing to execute a command that includes control or non-ascii characters\n");
-            continue;
-        }
-
-        // extract command name and parameters
-        auto space = std::find(buf.begin(), buf.end(), ' ');
-        FString command = buf.xislice_h(space);
-        while (*space == ' ')
-            ++space;
-
-        parameters = buf.xislice_t(space);
-
-        if (!command || command.startswith('?'))
-            command = "help";
-
-        if (!parameters)
-        {
-            LADMIN_LOG("Command: '%s' (without parameters)\n",
-                    command);
-        }
-        else
-        {
-            LADMIN_LOG("Command: '%s', parameters: '%s'\n",
-                    command, parameters);
-        }
-
-        // Analyse of the command
-        if (command == "help")
-            display_help(parameters);
-        else if (command == "add")
-            addaccount(parameters, 0); // 0: no email
-        else if (command == "ban")
-            banaccount(parameters);
-        else if (command == "banadd")
-            banaddaccount(parameters);
-        else if (command == "banset")
-            bansetaccount(parameters);
-        else if (command == "block")
-            blockaccount(parameters);
-        else if (command == "check")
-            checkaccount(parameters);
-        else if (command == "create")
-            addaccount(parameters, 1); // 1: with email
-        else if (command == "delete")
-            delaccount(parameters);
-        else if (command == "email")
-            changeemail(parameters);
-        else if (command == "getcount")
-            getlogincount();
-        else if (command == "gm")
-            changegmlevel(parameters);
-        else if (command == "id")
-            idaccount(parameters);
-        else if (command == "info")
-            infoaccount(atoi(parameters.c_str()));
-        else if (command == "kami")
-            sendbroadcast(parameters);  // flag for normal
-        else if (command == "itemfrob")
-            itemfrob(parameters);  // 0: to list all
-        else if (command == "list")
-            listaccount(parameters, 0);    // 0: to list all
-        else if (command == "listban")
-            listaccount(parameters, 3);    // 3: to list only accounts with state or bannished
-        else if (command == "listgm")
-            listaccount(parameters, 1);    // 1: to list only GM
-        else if (command == "listok")
-            listaccount(parameters, 4);    // 4: to list only accounts without state and not bannished
-        else if (command == "memo")
-            changememo(parameters);
-        else if (command == "name")
-            nameaccount(atoi(parameters.c_str()));
-        else if (command == "password")
-            changepasswd(parameters);
-        else if (command == "reloadgm")
-            reloadGM(parameters);
-        else if (command == "search")
-            listaccount(parameters, 2);    // 2: to list with pattern
-        else if (command == "sex")
-            changesex(parameters);
-        else if (command == "state")
-            changestate(parameters);
-        else if (command == "timeadd")
-            timeaddaccount(parameters);
-        else if (command == "timeset")
-            timesetaccount(parameters);
-        else if (command == "unban")
-            unbanaccount(parameters);
-        else if (command == "unblock")
-            unblockaccount(parameters);
-        else if (command == "version")
-            checkloginversion();
-        else if (command == "who")
-            whoaccount(parameters);
-        else if (command == "quit"
-            || command == "exit"
-            || command == "end")
-        {
-            PRINTF("Bye.\n");
-            exit(0);
-        }
-        else
-        {
-            PRINTF("Unknown command [%s].\n", buf);
-            LADMIN_LOG("Unknown command [%s].\n", buf);
-        }
-    }
-}
-
-//-------------------------------------------------------------
-// Function: Parse receiving informations from the login-server
-//-------------------------------------------------------------
-static
-void parse_fromlogin(int fd)
-{
-    if (session[fd]->eof)
-    {
-        PRINTF("Impossible to have a connection with the login-server [%s:%d] !\n",
-                login_ip, login_port);
-        LADMIN_LOG("Impossible to have a connection with the login-server [%s:%d] !\n",
-                login_ip, login_port);
-        delete_session(fd);
-        exit(0);
-    }
-
-//  PRINTF("parse_fromlogin : %d %d %d\n", fd, RFIFOREST(fd), RFIFOW(fd,0));
-
-    while (RFIFOREST(fd) >= 2)
-    {
-        switch (RFIFOW(fd, 0))
-        {
-            case 0x7919:       // answer of a connection request
-                if (RFIFOREST(fd) < 3)
-                    return;
-                if (RFIFOB(fd, 2) != 0)
-                {
-                    PRINTF("Error at login:\n");
-                    PRINTF(" - incorrect password,\n");
-                    PRINTF(" - administration system not activated, or\n");
-                    PRINTF(" - unauthorised IP.\n");
-                    LADMIN_LOG("Error at login: incorrect password, administration system not activated, or unauthorised IP.\n");
-                    session[fd]->eof = 1;
-                    //bytes_to_read = 1; // not stop at prompt
-                }
-                else
-                {
-                    Iprintf("Established connection.\n");
-                    LADMIN_LOG("Established connection.\n");
-                    Iprintf("Reading of the version of the login-server...\n");
-                    LADMIN_LOG("Reading of the version of the login-server...\n");
-                    //bytes_to_read = 1; // unchanged
-                    checkloginversion();
-                }
-                RFIFOSKIP(fd, 3);
-                break;
-
-            case 0x7531:       // Displaying of the version of the login-server
-                if (RFIFOREST(fd) < 10)
-                    return;
-            {
-                Iprintf("  Login-Server [%s:%d]\n",
-                        login_ip, login_port);
-                Version version;
-                RFIFO_STRUCT(login_fd, 2, version);
-                Iprintf("  tmwA version %hhu.%hhu.%hhu (dev? %hhu) (flags %hhx) (which %hhx) (vend %hu)\n",
-                        version.major, version.minor, version.patch,
-                        version.devel,
-
-                        version.flags, version.which,
-                        version.vend);
-            }
-                bytes_to_read = 0;
-                RFIFOSKIP(fd, 10);
-                break;
-
-            case 0x7925:       // Itemfrob-OK
-                RFIFOSKIP(fd, 2);
-                bytes_to_read = 0;
-                break;
-
-            case 0x7921:       // Displaying of the list of accounts
-                if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd, 2))
-                    return;
-                if (RFIFOW(fd, 2) < 5)
-                {
-                    LADMIN_LOG("  Receiving of a void accounts list.\n");
-                    if (list_count == 0)
-                    {
-                        Iprintf("No account found.\n");
-                    }
-                    else if (list_count == 1)
-                    {
-                        Iprintf("1 account found.\n");
-                    }
-                    else
-                        Iprintf("%d accounts found.\n", list_count);
-                    bytes_to_read = 0;
-                }
-                else
-                {
-                    int i;
-                    LADMIN_LOG("  Receiving of a accounts list.\n");
-                    for (i = 4; i < RFIFOW(fd, 2); i += 38)
-                    {
-                        AccountName userid = stringish<AccountName>(RFIFO_STRING<24>(fd, i + 5));
-                        VString<23> lower_userid = userid.to_lower();
-                        list_first = RFIFOL(fd, i) + 1;
-                        // here are checks...
-                        if (list_type == 0
-                            || (list_type == 1 && RFIFOB(fd, i + 4) > 0)
-                            || (list_type == 2 && lower_userid.contains_seq(parameters))
-                            || (list_type == 3 && RFIFOL(fd, i + 34) != 0)
-                            || (list_type == 4 && RFIFOL(fd, i + 34) == 0))
-                        {
-                            PRINTF("%10d ", RFIFOL(fd, i));
-                            if (RFIFOB(fd, i + 4) == 0)
-                                PRINTF("   ");
-                            else
-                                PRINTF("%2d ", RFIFOB(fd, i + 4));
-                            PRINTF("%-24s", userid);
-                            if (RFIFOB(fd, i + 29) == 0)
-                                PRINTF("%-5s ", "Femal");
-                            else if (RFIFOB(fd, i + 29) == 1)
-                                PRINTF("%-5s ", "Male");
-                            else
-                                PRINTF("%-5s ", "Servr");
-                            PRINTF("%6d ", RFIFOL(fd, i + 30));
-                            switch (RFIFOL(fd, i + 34))
-                            {
-                                case 0:
-                                    PRINTF("%-27s\n", "Account OK");
-                                    break;
-                                case 1:
-                                    PRINTF("%-27s\n", "Unregistered ID");
-                                    break;
-                                case 2:
-                                    PRINTF("%-27s\n", "Incorrect Password");
-                                    break;
-                                case 3:
-                                    PRINTF("%-27s\n", "This ID is expired");
-                                    break;
-                                case 4:
-                                    PRINTF("%-27s\n",
-                                            "Rejected from Server");
-                                    break;
-                                case 5:
-                                    PRINTF("%-27s\n", "Blocked by the GM Team");   // You have been blocked by the GM Team
-                                    break;
-                                case 6:
-                                    PRINTF("%-27s\n", "Your EXE file is too old"); // Your Game's EXE file is not the latest version
-                                    break;
-                                case 7:
-                                    PRINTF("%-27s\n", "Banishement or");
-                                    PRINTF("                                                   Prohibited to login until...\n");   // You are Prohibited to log in until %s
-                                    break;
-                                case 8:
-                                    PRINTF("%-27s\n",
-                                            "Server is over populated");
-                                    break;
-                                case 9:
-                                    PRINTF("%-27s\n", "No MSG");
-                                    break;
-                                default:   // 100
-                                    PRINTF("%-27s\n", "This ID is totally erased");    // This ID has been totally erased
-                                    break;
-                            }
-                            list_count++;
-                        }
-                    }
-                    // asking of the following acounts
-                    LADMIN_LOG("Request to login-server to obtain the list of accounts from %d to %d (complement).\n",
-                          list_first, list_last);
-                    WFIFOW(login_fd, 0) = 0x7920;
-                    WFIFOL(login_fd, 2) = list_first;
-                    WFIFOL(login_fd, 6) = list_last;
-                    WFIFOSET(login_fd, 10);
-                    bytes_to_read = 1;
-                }
-                RFIFOSKIP(fd, RFIFOW(fd, 2));
-                break;
-
-            case 0x7931:       // Answer of login-server about an account creation
-                if (RFIFOREST(fd) < 30)
-                    return;
-            {
-                int accid = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (accid == -1)
-                {
-                    PRINTF("Account [%s] creation failed. Same account already exists.\n",
-                            name);
-                    LADMIN_LOG("Account [%s] creation failed. Same account already exists.\n",
-                            name);
-                }
-                else
-                {
-                    PRINTF("Account [%s] is successfully created [id: %d].\n",
-                            name, accid);
-                    LADMIN_LOG("Account [%s] is successfully created [id: %d].\n",
-                            name, accid);
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 30);
-                break;
-
-            case 0x7933:       // Answer of login-server about an account deletion
-                if (RFIFOREST(fd) < 30)
-                    return;
-            {
-                int accid = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (accid == -1)
-                {
-                    PRINTF("Account [%s] deletion failed. Account doesn't exist.\n",
-                            name);
-                    LADMIN_LOG("Account [%s] deletion failed. Account doesn't exist.\n",
-                            name);
-                }
-                else
-                {
-                    PRINTF("Account [%s][id: %d] is successfully DELETED.\n",
-                            name, accid);
-                    LADMIN_LOG("Account [%s][id: %d] is successfully DELETED.\n",
-                            name, accid);
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 30);
-                break;
-
-            case 0x7935:       // answer of the change of an account password
-                if (RFIFOREST(fd) < 30)
-                    return;
-            {
-                int accid = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (accid == -1)
-                {
-                    PRINTF("Account [%s] password changing failed.\n",
-                            name);
-                    PRINTF("Account [%s] doesn't exist.\n",
-                            name);
-                    LADMIN_LOG("Account password changing failed. The compte [%s] doesn't exist.\n",
-                            name);
-                }
-                else
-                {
-                    PRINTF("Account [%s][id: %d] password successfully changed.\n",
-                            name, accid);
-                    LADMIN_LOG("Account [%s][id: %d] password successfully changed.\n",
-                            name, accid);
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 30);
-                break;
-
-            case 0x7937:       // answer of the change of an account state
-                if (RFIFOREST(fd) < 34)
-                    return;
-            {
-                int accid = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                int state = RFIFOL(fd, 30);
-                if (accid == -1)
-                {
-                    PRINTF("Account [%s] state changing failed. Account doesn't exist.\n",
-                            name);
-                    LADMIN_LOG("Account [%s] state changing failed. Account doesn't exist.\n",
-                            name);
-                }
-                else
-                {
-                    MString tmpstr;
-                    tmpstr += STRPRINTF(
-                             "Account [%s] state successfully changed in [",
-                             name);
-                    switch (state)
-                    {
-                        case 0:
-                            tmpstr += "0: Account OK";
-                            break;
-                        case 1:
-                            tmpstr += "1: Unregistered ID";
-                            break;
-                        case 2:
-                            tmpstr += "2: Incorrect Password";
-                            break;
-                        case 3:
-                            tmpstr += "3: This ID is expired";
-                            break;
-                        case 4:
-                            tmpstr += "4: Rejected from Server";
-                            break;
-                        case 5:
-                            tmpstr += "5: You have been blocked by the GM Team";
-                            break;
-                        case 6:
-                            tmpstr += "6: [Your Game's EXE file is not the latest version";
-                            break;
-                        case 7:
-                            tmpstr += "7: You are Prohibited to log in until...";
-                            break;
-                        case 8:
-                            tmpstr += "8: Server is jammed due to over populated";
-                            break;
-                        case 9:
-                            tmpstr += "9: No MSG";
-                            break;
-                        default:   // 100
-                            tmpstr += "100: This ID is totally erased";
-                            break;
-                    }
-                    tmpstr += ']';
-                    FString tmpstr_ = FString(tmpstr);
-                    PRINTF("%s\n", tmpstr_);
-                    LADMIN_LOG("%s\n", tmpstr_);
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 34);
-                break;
-
-            case 0x7939:       // answer of the number of online players
-                if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd, 2))
-                    return;
-                {
-                    // Get length of the received packet
-                    LADMIN_LOG("  Receiving of the number of online players.\n");
-                    // Read information of the servers
-                    if (RFIFOW(fd, 2) < 5)
-                    {
-                        PRINTF("  No server is connected to the login-server.\n");
-                    }
-                    else
-                    {
-                        PRINTF("  Number of online players (server: number).\n");
-                        // Displaying of result
-                        for (int i = 4; i < RFIFOW(fd, 2); i += 32)
-                        {
-                            ServerName name = stringish<ServerName>(RFIFO_STRING<20>(fd, i + 6));
-                            PRINTF("    %-20s : %5d\n", name,
-                                    RFIFOW(fd, i + 26));
-                        }
-                    }
-                }
-                bytes_to_read = 0;
-                RFIFOSKIP(fd, RFIFOW(fd, 2));
-                break;
-
-            case 0x793b:       // answer of the check of a password
-                if (RFIFOREST(fd) < 30)
-                    return;
-            {
-                int account_id = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (account_id == -1)
-                {
-                    PRINTF("The account [%s] doesn't exist or the password is incorrect.\n",
-                            name);
-                    LADMIN_LOG("The account [%s] doesn't exist or the password is incorrect.\n",
-                            name);
-                }
-                else
-                {
-                    PRINTF("The proposed password is correct for the account [%s][id: %d].\n",
-                            name, account_id);
-                    LADMIN_LOG("The proposed password is correct for the account [%s][id: %d].\n",
-                            name, account_id);
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 30);
-                break;
-
-            case 0x793d:       // answer of the change of an account sex
-                if (RFIFOREST(fd) < 30)
-                    return;
-            {
-                int account_id = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (account_id == -1)
-                {
-                    PRINTF("Account [%s] sex changing failed.\n",
-                            name);
-                    PRINTF("Account [%s] doesn't exist or the sex is already the good sex.\n",
-                            name);
-                    LADMIN_LOG("Account sex changing failed. The compte [%s] doesn't exist or the sex is already the good sex.\n",
-                            name);
-                }
-                else
-                {
-                    PRINTF("Account [%s][id: %d] sex successfully changed.\n",
-                            name, account_id);
-                    LADMIN_LOG("Account [%s][id: %d] sex successfully changed.\n",
-                            name, account_id);
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 30);
-                break;
-
-            case 0x793f:       // answer of the change of an account GM level
-                if (RFIFOREST(fd) < 30)
-                    return;
-            {
-                int account_id = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (account_id == -1)
-                {
-                    PRINTF("Account [%s] GM level changing failed.\n",
-                            name);
-                    PRINTF("Account [%s] doesn't exist, the GM level is already the good GM level\n",
-                            name);
-                    PRINTF("or it's impossible to modify the GM accounts file.\n");
-                    LADMIN_LOG("Account GM level changing failed. The compte [%s] doesn't exist, the GM level is already the good sex or it's impossible to modify the GM accounts file.\n",
-                            name);
-                }
-                else
-                {
-                    PRINTF("Account [%s][id: %d] GM level successfully changed.\n",
-                            name, account_id);
-                    LADMIN_LOG("Account [%s][id: %d] GM level successfully changed.\n",
-                            name, account_id);
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 30);
-                break;
-
-            case 0x7941:       // answer of the change of an account email
-                if (RFIFOREST(fd) < 30)
-                    return;
-            {
-                int account_id = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (account_id == -1)
-                {
-                    PRINTF("Account [%s] e-mail changing failed.\n",
-                            name);
-                    PRINTF("Account [%s] doesn't exist.\n",
-                            name);
-                    LADMIN_LOG("Account e-mail changing failed. The compte [%s] doesn't exist.\n",
-                            name);
-                }
-                else
-                {
-                    PRINTF("Account [%s][id: %d] e-mail successfully changed.\n",
-                            name, account_id);
-                    LADMIN_LOG("Account [%s][id: %d] e-mail successfully changed.\n",
-                            name, account_id);
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 30);
-                break;
-
-            case 0x7943:       // answer of the change of an account memo
-                if (RFIFOREST(fd) < 30)
-                    return;
-            {
-                int account_id = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (account_id == -1)
-                {
-                    PRINTF("Account [%s] memo changing failed. Account doesn't exist.\n",
-                            name);
-                    LADMIN_LOG("Account [%s] memo changing failed. Account doesn't exist.\n",
-                            name);
-                }
-                else
-                {
-                    PRINTF("Account [%s][id: %d] memo successfully changed.\n",
-                            name, account_id);
-                    LADMIN_LOG("Account [%s][id: %d] memo successfully changed.\n",
-                            name, account_id);
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 30);
-                break;
-
-            case 0x7945:       // answer of an account id search
-                if (RFIFOREST(fd) < 30)
-                    return;
-            {
-                int account_id = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (account_id == -1)
-                {
-                    PRINTF("Unable to find the account [%s] id. Account doesn't exist.\n",
-                            name);
-                    LADMIN_LOG("Unable to find the account [%s] id. Account doesn't exist.\n",
-                            name);
-                }
-                else
-                {
-                    PRINTF("The account [%s] have the id: %d.\n",
-                            name, account_id);
-                    LADMIN_LOG("The account [%s] have the id: %d.\n",
-                            name, account_id);
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 30);
-                break;
-
-            case 0x7947:       // answer of an account name search
-                if (RFIFOREST(fd) < 30)
-                    return;
-            {
-                int account_id = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (!name)
-                {
-                    PRINTF("Unable to find the account [%d] name. Account doesn't exist.\n",
-                            account_id);
-                    LADMIN_LOG("Unable to find the account [%d] name. Account doesn't exist.\n",
-                            account_id);
-                }
-                else
-                {
-                    PRINTF("The account [id: %d] have the name: %s.\n",
-                            account_id, name);
-                    LADMIN_LOG("The account [id: %d] have the name: %s.\n",
-                            account_id, name);
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 30);
-                break;
-
-            case 0x7949:       // answer of an account validity limit set
-                if (RFIFOREST(fd) < 34)
-                    return;
-            {
-                int account_id = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (RFIFOL(fd, 2) == -1)
-                {
-                    PRINTF("Account [%s] validity limit changing failed. Account doesn't exist.\n",
-                            name);
-                    LADMIN_LOG("Account [%s] validity limit changing failed. Account doesn't exist.\n",
-                            name);
-                }
-                else
-                {
-                    TimeT timestamp = static_cast<time_t>(RFIFOL(fd, 30));
-                    if (!timestamp)
-                    {
-                        PRINTF("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited].\n",
-                                name, account_id);
-                        LADMIN_LOG("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited].\n",
-                                name, account_id);
-                    }
-                    else
-                    {
-                        timestamp_seconds_buffer tmpstr;
-                        stamp_time(tmpstr, &timestamp);
-                        PRINTF("Validity Limit of the account [%s][id: %d] successfully changed to be until %s.\n",
-                                name, account_id, tmpstr);
-                        LADMIN_LOG("Validity Limit of the account [%s][id: %d] successfully changed to be until %s.\n",
-                                name, account_id,
-                                tmpstr);
-                    }
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 34);
-                break;
-
-            case 0x794b:       // answer of an account ban set
-                if (RFIFOREST(fd) < 34)
-                    return;
-            {
-                int account_id = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (account_id == -1)
-                {
-                    PRINTF("Account [%s] final date of banishment changing failed. Account doesn't exist.\n",
-                            name);
-                    LADMIN_LOG("Account [%s] final date of banishment changing failed. Account doesn't exist.\n",
-                            name);
-                }
-                else
-                {
-                    TimeT timestamp = static_cast<time_t>(RFIFOL(fd, 30));
-                    if (!timestamp)
-                    {
-                        PRINTF("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n",
-                                name, account_id);
-                        LADMIN_LOG("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n",
-                                name, account_id);
-                    }
-                    else
-                    {
-                        timestamp_seconds_buffer tmpstr;
-                        stamp_time(tmpstr, &timestamp);
-                        PRINTF("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n",
-                                name, RFIFOL(fd, 2), tmpstr);
-                        LADMIN_LOG("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n",
-                                name, RFIFOL(fd, 2),
-                                tmpstr);
-                    }
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 34);
-                break;
-
-            case 0x794d:       // answer of an account ban date/time changing
-                if (RFIFOREST(fd) < 34)
-                    return;
-            {
-                int account_id = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (account_id == -1)
-                {
-                    PRINTF("Account [%s] final date of banishment changing failed. Account doesn't exist.\n",
-                            name);
-                    LADMIN_LOG("Account [%s] final date of banishment changing failed. Account doesn't exist.\n",
-                            name);
-                }
-                else
-                {
-                    TimeT timestamp = static_cast<time_t>(RFIFOL(fd, 30));
-                    if (!timestamp)
-                    {
-                        PRINTF("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n",
-                                name, account_id);
-                        LADMIN_LOG("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n",
-                                name, account_id);
-                    }
-                    else
-                    {
-                        timestamp_seconds_buffer tmpstr;
-                        stamp_time(tmpstr, &timestamp);
-                        PRINTF("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n",
-                                name, account_id,
-                                tmpstr);
-                        LADMIN_LOG("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n",
-                                name, account_id,
-                                tmpstr);
-                    }
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 34);
-                break;
-
-            case 0x794f:       // answer of a broadcast
-                if (RFIFOREST(fd) < 4)
-                    return;
-                if (RFIFOW(fd, 2) == static_cast<uint16_t>(-1))
-                {
-                    PRINTF("Message sending failed. No online char-server.\n");
-                    LADMIN_LOG("Message sending failed. No online char-server.\n");
-                }
-                else
-                {
-                    PRINTF("Message successfully sended to login-server.\n");
-                    LADMIN_LOG("Message successfully sended to login-server.\n");
-                }
-                bytes_to_read = 0;
-                RFIFOSKIP(fd, 4);
-                break;
-
-            case 0x7951:       // answer of an account validity limit changing
-                if (RFIFOREST(fd) < 34)
-                    return;
-            {
-                int account_id = RFIFOL(fd, 2);
-                AccountName name = stringish<AccountName>(RFIFO_STRING<24>(fd, 6));
-                if (account_id == -1)
-                {
-                    PRINTF("Account [%s] validity limit changing failed. Account doesn't exist.\n",
-                            name);
-                    LADMIN_LOG("Account [%s] validity limit changing failed. Account doesn't exist.\n",
-                            name);
-                }
-                else
-                {
-                    TimeT timestamp = static_cast<time_t>(RFIFOL(fd, 30));
-                    if (!timestamp)
-                    {
-                        PRINTF("Validity limit of the account [%s][id: %d] unchanged.\n",
-                                name, account_id);
-                        PRINTF("The account have an unlimited validity limit or\n");
-                        PRINTF("the changing is impossible with the proposed adjustments.\n");
-                        LADMIN_LOG("Validity limit of the account [%s][id: %d] unchanged. The account have an unlimited validity limit or the changing is impossible with the proposed adjustments.\n",
-                                name, account_id);
-                    }
-                    else
-                    {
-                        timestamp_seconds_buffer tmpstr;
-                        stamp_time(tmpstr, &timestamp);
-                        PRINTF("Validity limit of the account [%s][id: %d] successfully changed to be until %s.\n",
-                                name, account_id,
-                                tmpstr);
-                        LADMIN_LOG("Validity limit of the account [%s][id: %d] successfully changed to be until %s.\n",
-                                name, account_id,
-                                tmpstr);
-                    }
-                }
-                bytes_to_read = 0;
-            }
-                RFIFOSKIP(fd, 34);
-                break;
-
-            case 0x7953:       // answer of a request about informations of an account (by account name/id)
-                if (RFIFOREST(fd) < 150
-                    || RFIFOREST(fd) < (150 + RFIFOW(fd, 148)))
-                    return;
-                {
-                    int account_id = RFIFOL(fd, 2);
-                    uint8_t gm = RFIFOB(fd, 6);
-                    AccountName userid = stringish<AccountName>(RFIFO_STRING<24>(fd, 7));
-                    uint8_t sex = RFIFOB(fd, 31);
-                    int connections = RFIFOL(fd, 32);
-                    int state = RFIFOL(fd, 36);
-                    timestamp_seconds_buffer error_message = stringish<timestamp_seconds_buffer>(RFIFO_STRING<20>(fd, 40));
-                    timestamp_milliseconds_buffer lastlogin = stringish<timestamp_milliseconds_buffer>(RFIFO_STRING<24>(fd, 60));
-                    VString<15> last_ip_ = RFIFO_STRING<16>(fd, 84);
-                    AccountEmail email = stringish<AccountEmail>(RFIFO_STRING<40>(fd, 100));
-                    TimeT connect_until_time = static_cast<time_t>(RFIFOL(fd, 140));
-                    TimeT ban_until_time = static_cast<time_t>(RFIFOL(fd, 144));
-                    FString memo = RFIFO_STRING(fd, 150, RFIFOW(fd, 148));
-                    if (account_id == -1)
-                    {
-                        PRINTF("Unabled to find the account [%s]. Account doesn't exist.\n",
-                                userid);
-                        LADMIN_LOG("Unabled to find the account [%s]. Account doesn't exist.\n",
-                                userid);
-                    }
-                    else if (!userid)
-                    {
-                        PRINTF("Unabled to find the account [id: %d]. Account doesn't exist.\n",
-                                account_id);
-                        LADMIN_LOG("Unabled to find the account [id: %d]. Account doesn't exist.\n",
-                                account_id);
-                    }
-                    else
-                    {
-                        LADMIN_LOG("Receiving information about an account.\n");
-                        PRINTF("The account is set with:\n");
-                        if (!gm)
-                        {
-                            PRINTF(" Id:     %d (non-GM)\n", account_id);
-                        }
-                        else
-                        {
-                            PRINTF(" Id:     %d (GM level %d)\n",
-                                    account_id, gm);
-                        }
-                        PRINTF(" Name:   '%s'\n", userid);
-                        if (sex == 0)
-                            PRINTF(" Sex:    Female\n");
-                        else if (sex == 1)
-                            PRINTF(" Sex:    Male\n");
-                        else
-                            PRINTF(" Sex:    Server\n");
-                        PRINTF(" E-mail: %s\n", email);
-                        switch (state)
-                        {
-                            case 0:
-                                PRINTF(" Statut: 0 [Account OK]\n");
-                                break;
-                            case 1:
-                                PRINTF(" Statut: 1 [Unregistered ID]\n");
-                                break;
-                            case 2:
-                                PRINTF(" Statut: 2 [Incorrect Password]\n");
-                                break;
-                            case 3:
-                                PRINTF(" Statut: 3 [This ID is expired]\n");
-                                break;
-                            case 4:
-                                PRINTF(" Statut: 4 [Rejected from Server]\n");
-                                break;
-                            case 5:
-                                PRINTF(" Statut: 5 [You have been blocked by the GM Team]\n");
-                                break;
-                            case 6:
-                                PRINTF(" Statut: 6 [Your Game's EXE file is not the latest version]\n");
-                                break;
-                            case 7:
-                                PRINTF(" Statut: 7 [You are Prohibited to log in until %s]\n",
-                                     error_message);
-                                break;
-                            case 8:
-                                PRINTF(" Statut: 8 [Server is jammed due to over populated]\n");
-                                break;
-                            case 9:
-                                PRINTF(" Statut: 9 [No MSG]\n");
-                                break;
-                            default:   // 100
-                                PRINTF(" Statut: %d [This ID is totally erased]\n",
-                                        state);
-                                break;
-                        }
-                        if (!ban_until_time)
-                        {
-                            PRINTF(" Banishment: not banished.\n");
-                        }
-                        else
-                        {
-                            timestamp_seconds_buffer tmpstr;
-                            stamp_time(tmpstr, &ban_until_time);
-                            PRINTF(" Banishment: until %s.\n", tmpstr);
-                        }
-                        if (connections > 1)
-                            PRINTF(" Count:  %d connections.\n",
-                                    connections);
-                        else
-                            PRINTF(" Count:  %d connection.\n",
-                                    connections);
-                        PRINTF(" Last connection at: %s (ip: %s)\n",
-                                lastlogin, last_ip_);
-                        if (!connect_until_time)
-                        {
-                            PRINTF(" Validity limit: unlimited.\n");
-                        }
-                        else
-                        {
-                            timestamp_seconds_buffer tmpstr;
-                            stamp_time(tmpstr, &connect_until_time);
-                            PRINTF(" Validity limit: until %s.\n",
-                                    tmpstr);
-                        }
-                        PRINTF(" Memo:   '%s'\n", memo);
-                    }
-                }
-                bytes_to_read = 0;
-                RFIFOSKIP(fd, 150 + RFIFOW(fd, 148));
-                break;
-
-            default:
-                PRINTF("Remote administration has been disconnected (unknown packet).\n");
-                LADMIN_LOG("'End of connection, unknown packet.\n");
-                session[fd]->eof = 1;
-                return;
-        }
-    }
-
-    // if we don't wait new packets, do the prompt
-    prompt();
-}
-
-//------------------------------------
-// Function to connect to login-server
-//------------------------------------
-static
-int Connect_login_server(void)
-{
-    Iprintf("Attempt to connect to login-server...\n");
-    LADMIN_LOG("Attempt to connect to login-server...\n");
-
-    if ((login_fd = make_connection(login_ip, login_port)) < 0)
-        return 0;
-
-    {
-        WFIFOW(login_fd, 0) = 0x7918;  // Request for administation login
-        WFIFOW(login_fd, 2) = 0;   // no encrypted
-        WFIFO_STRING(login_fd, 4, admin_pass, 24);
-        WFIFOSET(login_fd, 28);
-        bytes_to_read = 1;
-
-        Iprintf("Sending of the password...\n");
-        LADMIN_LOG("Sending of the password...\n");
-    }
-
-    return 0;
-}
-
-//-----------------------------------
-// Reading general configuration file
-//-----------------------------------
-static
-int ladmin_config_read(ZString cfgName)
-{
-    std::ifstream in(cfgName.c_str());
-    if (!in.is_open())
-    {
-        PRINTF("\033[0mConfiguration file (%s) not found.\n", cfgName);
-        return 1;
-    }
-
-    Iprintf("\033[0m---Start reading of Ladmin configuration file (%s)\n",
-         cfgName);
-    FString line;
-    while (io::getline(in, line))
-    {
-        SString w1;
-        TString w2;
-        if (!split_key_value(line, &w1, &w2))
-            continue;
-
-        if (w1 == "login_ip")
-        {
-            struct hostent *h = gethostbyname(w2.c_str());
-            if (h != NULL)
-            {
-                Iprintf("Login server IP address: %s -> %s\n",
-                        w2, login_ip);
-                login_ip = IP4Address({
-                        static_cast<uint8_t>(h->h_addr[0]),
-                        static_cast<uint8_t>(h->h_addr[1]),
-                        static_cast<uint8_t>(h->h_addr[2]),
-                        static_cast<uint8_t>(h->h_addr[3]),
-                });
-            }
-        }
-        else if (w1 == "login_port")
-        {
-            login_port = atoi(w2.c_str());
-        }
-        else if (w1 == "admin_pass")
-        {
-            admin_pass = stringish<AccountPass>(w2);
-        }
-        else if (w1 == "ladmin_log_filename")
-        {
-            ladmin_log_filename = w2;
-        }
-        else if (w1 == "import")
-        {
-            ladmin_config_read(w2);
-        }
-        else
-        {
-            PRINTF("WARNING: unknown ladmin config key: %s\n", FString(w1));
-        }
-    }
-
-    Iprintf("---End reading of Ladmin configuration file.\n");
-
-    return 0;
-}
-
-//--------------------------------------
-// Function called at exit of the server
-//--------------------------------------
-void term_func(void)
-{
-
-    if (already_exit_function == 0)
-    {
-        delete_session(login_fd);
-
-        Iprintf("\033[0m----End of Ladmin (normal end with closing of all files).\n");
-        LADMIN_LOG("----End of Ladmin (normal end with closing of all files).\n");
-
-        already_exit_function = 1;
-    }
-}
-
-//------------------------
-// Main function of ladmin
-//------------------------
-int do_init(int argc, ZString *argv)
-{
-    eathena_interactive_session = isatty(0);
-    // read ladmin configuration
-    ladmin_config_read((argc > 1) ? argv[1] : LADMIN_CONF_NAME);
-
-    LADMIN_LOG("");
-    LADMIN_LOG("Configuration file readed.\n");
-
-    set_defaultparse(parse_fromlogin);
-
-    Iprintf("EAthena login-server administration tool.\n");
-    Version version = CURRENT_LOGIN_SERVER_VERSION;
-    Iprintf("for tmwA version %hhu.%hhu.%hhu (dev? %hhu) (flags %hhx) (which %hhx) (vend %hu)\n",
-            version.major, version.minor, version.patch,
-            version.devel,
-
-            version.flags, version.which,
-            version.vend);
-
-    LADMIN_LOG("Ladmin is ready.\n");
-    Iprintf("Ladmin is \033[1;32mready\033[0m.\n\n");
-
-    Connect_login_server();
-
-    return 0;
-}