diff options
Diffstat (limited to 'src/ladmin/ladmin.c')
| -rw-r--r-- | src/ladmin/ladmin.c | 4383 |
1 files changed, 0 insertions, 4383 deletions
diff --git a/src/ladmin/ladmin.c b/src/ladmin/ladmin.c deleted file mode 100644 index 432a78a95..000000000 --- a/src/ladmin/ladmin.c +++ /dev/null @@ -1,4383 +0,0 @@ -// $Id: ladmin.c,v 1.1.1.1 2004/09/10 17:26:52 MagicalTux Exp $ -/////////////////////////////////////////////////////////////////////////// -// EAthena login-server remote administration tool -// Ladamin in C by [Yor] -// if you modify this software, modify ladmin in tool too. -/////////////////////////////////////////////////////////////////////////// - -#include <sys/types.h> -#include <time.h> -#ifdef WIN32 -#define WIN32_LEAN_AND_MEAN -#include <winsock2.h> -void Gettimeofday(struct timeval *timenow) -{ - time_t t; - t = clock(); - timenow->tv_usec = t; - timenow->tv_sec = t / CLK_TCK; - return; -} -#define gettimeofday(timenow, dummy) Gettimeofday(timenow) -#else -#include <sys/socket.h> -#include <netinet/in.h> -#include <sys/time.h> // gettimeofday -#include <sys/ioctl.h> -#include <unistd.h> // close -#include <arpa/inet.h> // inet_addr -#include <netdb.h> // gethostbyname -#endif -#include <stdio.h> -#include <stdlib.h> -#include <signal.h> -#include <fcntl.h> -#include <string.h> // str* -#include <stdarg.h> // valist -#include <ctype.h> // tolower - -#include "../common/strlib.h" -#include "../common/core.h" -#include "../common/socket.h" -#include "ladmin.h" -#include "../common/version.h" -#include "../common/mmo.h" - -#ifdef PASSWORDENC -#include "md5calc.h" -#endif - -#ifdef MEMWATCH -#include "memwatch.h" -#endif - -//-------------------------------INSTRUCTIONS------------------------------ -// Set the variables below: -// IP of the login server. -// Port where the login-server listens incoming packets. -// Password of administration (same of config_athena.conf). -// Displayed language of the sofware (if not correct, english is used). -// IMPORTANT: -// Be sure that you authorize remote administration in login-server -// (see login_athena.conf, 'admin_state' parameter) -//------------------------------------------------------------------------- -char loginserverip[16] = "127.0.0.1"; // IP of login-server -int loginserverport = 6900; // Port of login-server -char loginserveradminpassword[24] = "admin"; // Administration password -#ifdef PASSWORDENC -int passenc = 2; // Encoding type of the password -#else -int passenc = 0; // Encoding type of the password -#endif -char defaultlanguage = 'E'; // Default language (F: Français/E: English) - // (if it's not 'F', default is English) -char ladmin_log_filename[1024] = "log/ladmin.log"; -char date_format[32] = "%Y-%m-%d %H:%M:%S"; -//------------------------------------------------------------------------- -// LIST of COMMANDs that you can type at the prompt: -// To use these commands you can only type only the first letters. -// You must type a minimum of letters (you can not type 'a', -// because ladmin doesn't know if it's for 'aide' or for 'add') -// <Example> q <= quit, li <= list, pass <= passwd, etc. -// -// Note: every time you must give a account_name, you can use "" or '' (spaces can be included) -// -// aide/help/? -// Display the description of the commands -// aide/help/? [command] -// Display the description of the specified command -// -// add <account_name> <sex> <password> -// Create an account with the default email (a@a.com). -// Concerning the sex, only the first letter is used (F or M). -// The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail. -// When the password is omitted, the input is done without displaying of the pressed keys. -// <example> add testname Male testpass -// -// ban/banish yyyy/mm/dd hh:mm:ss <account name> -// Changes the final date of a banishment of an account. -// Like banset, but <account name> is at end. -// -// banadd <account_name> <modifier> -// Adds or substracts time from the final date of a banishment of an account. -// Modifier is done as follows: -// Adjustment value (-1, 1, +1, etc...) -// Modified element: -// a or y: year -// m: month -// j or d: day -// h: hour -// mn: minute -// s: second -// <example> banadd testname +1m-2mn1s-6y -// this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time. -// NOTE: If you modify the final date of a non-banished account, -// you fix the final date to (actual time +- adjustments) -// -// banset <account_name> yyyy/mm/dd [hh:mm:ss] -// Changes the final date of a banishment of an account. -// Default time [hh:mm:ss]: 23:59:59. -// banset <account_name> 0 -// Set a non-banished account (0 = unbanished). -// -// block <account name> -// Set state 5 (You have been blocked by the GM Team) to an account. -// Like state <account name> 5. -// -// check <account_name> <password> -// Check the validity of a password for an account -// NOTE: Server will never sends back a password. -// It's the only method you have to know if a password is correct. -// The other method is to have a ('physical') access to the accounts file. -// -// create <account_name> <sex> <email> <password> -// Like the 'add' command, but with e-mail moreover. -// <example> create testname Male my@mail.com testpass -// -// del <account name> -// Remove an account. -// This order requires confirmation. After confirmation, the account is deleted. -// -// email <account_name> <email> -// Modify the e-mail of an account. -// -// getcount -// Give the number of players online on all char-servers. -// -// gm <account_name> [GM_level] -// Modify the GM level of an account. -// Default value remove GM level (GM level = 0). -// <example> gm testname 80 -// -// id <account name> -// Give the id of an account. -// -// info <account_id> -// Display complete information of an account. -// -// kami <message> -// Sends a broadcast message on all map-server (in yellow). -// kamib <message> -// Sends a broadcast message on all map-server (in blue). -// -// language <language> -// Change the language of displaying. -// -// list/ls [start_id [end_id]] -// Display a list of accounts. -// 'start_id', 'end_id': indicate end and start identifiers. -// Research by name is not possible with this command. -// <example> list 10 9999999 -// -// listBan/lsBan [start_id [end_id]] -// Like list/ls, but only for accounts with state or banished -// -// listGM/lsGM [start_id [end_id]] -// Like list/ls, but only for GM accounts -// -// listOK/lsOK [start_id [end_id]] -// Like list/ls, but only for accounts without state and not banished -// -// memo <account_name> <memo> -// Modify the memo of an account. -// 'memo': it can have until 253 characters (with spaces or not). -// -// name <account_id> -// Give the name of an account. -// -// passwd <account_name> <new_password> -// Change the password of an account. -// When new password is omitted, the input is done without displaying of the pressed keys. -// -// quit/end/exit -// End of the program of administration -// -// reloadGM -// Reload GM configuration file -// -// search <expression> -// Seek accounts. -// Displays the accounts whose names correspond. -// search -r/-e/--expr/--regex <expression> -// Seek accounts by regular expression. -// Displays the accounts whose names correspond. -// -// sex <account_name> <sex> -// Modify the sex of an account. -// <example> sex testname Male -// -// state <account_name> <new_state> <error_message_#7> -// Change the state of an account. -// 'new_state': state is the state of the packet 0x006a + 1. The possibilities are: -// 0 = Account ok 6 = Your Game's EXE file is not the latest version -// 1 = Unregistered ID 7 = You are Prohibited to log in until %s -// 2 = Incorrect Password 8 = Server is jammed due to over populated -// 3 = This ID is expired 9 = No MSG -// 4 = Rejected from Server 100 = This ID has been totally erased -// 5 = You have been blocked by the GM Team -// all other values are 'No MSG', then use state 9 please. -// 'error_message_#7': message of the code error 6 = Your are Prohibited to log in until %s (packet 0x006a) -// -// timeadd <account_name> <modifier> -// Adds or substracts time from the validity limit of an account. -// Modifier is done as follows: -// Adjustment value (-1, 1, +1, etc...) -// Modified element: -// a or y: year -// m: month -// j or d: day -// h: hour -// mn: minute -// s: second -// <example> timeadd testname +1m-2mn1s-6y -// this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time. -// NOTE: You can not modify a unlimited validity limit. -// If you want modify it, you want probably create a limited validity limit. -// So, at first, you must set the validity limit to a date/time. -// -// timeset <account_name> yyyy/mm/dd [hh:mm:ss] -// Changes the validity limit of an account. -// Default time [hh:mm:ss]: 23:59:59. -// timeset <account_name> 0 -// Gives an unlimited validity limit (0 = unlimited). -// -// unban/unbanish <account name> -// Unban an account. -// Like banset <account name> 0. -// -// unblock <account name> -// Set state 0 (Account ok) to an account. -// Like state <account name> 0. -// -// version -// Display the version of the login-server. -// -// who <account name> -// Displays complete information of an account. -// -//------------------------------------------------------------------------- -int login_fd; -int login_ip; -int bytes_to_read = 0; // flag to know if we waiting bytes from login-server -char command[1024]; -char parameters[1024]; -int list_first, list_last, list_type, list_count; // parameter to display a list of accounts -int already_exit_function = 0; // sometimes, the exit function is called twice... so, don't log twice the message - -//------------------------------ -// Writing function of logs file -//------------------------------ -int ladmin_log(char *fmt, ...) { - FILE *logfp; - va_list ap; - struct timeval tv; - char tmpstr[2048]; - - va_start(ap, fmt); - - logfp = fopen(ladmin_log_filename, "a"); - if (logfp) { - if (fmt[0] == '\0') // jump a line if no message - fprintf(logfp, RETCODE); - else { - gettimeofday(&tv, NULL); - strftime(tmpstr, 24, date_format, localtime((const time_t*)&(tv.tv_sec))); - sprintf(tmpstr + strlen(tmpstr), ".%03d: %s", (int)tv.tv_usec / 1000, fmt); - vfprintf(logfp, tmpstr, ap); - } - fclose(logfp); - } - - va_end(ap); - return 0; -} - -//--------------------------------------------- -// Function to return ordonal text of a number. -//--------------------------------------------- -char* makeordinal(int number) { - if (defaultlanguage == 'F') { - if (number == 0) - return ""; - else if (number == 1) - return "er"; - else - return "ème"; - } else { - if ((number % 10) < 4 && (number % 10) != 0 && (number < 10 || number > 20)) { - if ((number % 10) == 1) - return "st"; - else if ((number % 10) == 2) - return "nd"; - else - return "rd"; - } else { - return "th"; - } - } - return ""; -} - -//----------------------------------------------------------------------------------------- -// Function to test of the validity of an account name (return 0 if incorrect, and 1 if ok) -//----------------------------------------------------------------------------------------- -int verify_accountname(char* account_name) { - int i; - - for(i = 0; account_name[i]; i++) { - if (account_name[i] < 32) { - if (defaultlanguage == 'F') { - printf("Caractère interdit trouvé dans le nom du compte (%d%s caractère).\n", i+1, makeordinal(i+1)); - ladmin_log("Caractère interdit trouvé dans le nom du compte (%d%s caractère)." RETCODE, i+1, makeordinal(i+1)); - } else { - printf("Illegal character found in the account name (%d%s character).\n", i+1, makeordinal(i+1)); - ladmin_log("Illegal character found in the account name (%d%s character)." RETCODE, i+1, makeordinal(i+1)); - } - return 0; - } - } - - if (strlen(account_name) < 4) { - if (defaultlanguage == 'F') { - printf("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n"); - ladmin_log("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères." RETCODE); - } else { - printf("Account name is too short. Please input an account name of 4-23 bytes.\n"); - ladmin_log("Account name is too short. Please input an account name of 4-23 bytes." RETCODE); - } - return 0; - } - - if (strlen(account_name) > 23) { - if (defaultlanguage == 'F') { - printf("Nom du compte trop long. Entrez un nom de compte de 4-23 caractères.\n"); - ladmin_log("Nom du compte trop long. Entrez un nom de compte de 4-23 caractères." RETCODE); - } else { - printf("Account name is too long. Please input an account name of 4-23 bytes.\n"); - ladmin_log("Account name is too long. Please input an account name of 4-23 bytes." RETCODE); - } - return 0; - } - - return 1; -} - -//--------------------------------------------------- -// E-mail check: return 0 (not correct) or 1 (valid). -//--------------------------------------------------- -int e_mail_check(char *email) { - char ch; - char* last_arobas; - - // athena limits - if (strlen(email) < 3 || strlen(email) > 39) - return 0; - - // part of RFC limits (official reference of e-mail description) - if (strchr(email, '@') == NULL || email[strlen(email)-1] == '@') - return 0; - - if (email[strlen(email)-1] == '.') - return 0; - - last_arobas = strrchr(email, '@'); - - if (strstr(last_arobas, "@.") != NULL || - strstr(last_arobas, "..") != NULL) - return 0; - - for(ch = 1; ch < 32; ch++) { - if (strchr(last_arobas, ch) != NULL) { - return 0; - break; - } - } - - if (strchr(last_arobas, ' ') != NULL || - strchr(last_arobas, ';') != NULL) - return 0; - - // all correct - return 1; -} - -//---------------------------------- -// Sub-function: Input of a password -//---------------------------------- -int typepasswd(char * password) { - char password1[1023], password2[1023]; - int letter; - int i; - - if (defaultlanguage == 'F') { - ladmin_log("Aucun mot de passe n'a été donné. Demande d'un mot de passe." RETCODE); - } else { - ladmin_log("No password was given. Request to obtain a password." RETCODE); - } - - memset(password1, '\0', sizeof(password1)); - memset(password2, '\0', sizeof(password2)); - if (defaultlanguage == 'F') - printf("\033[1;36m Entrez le mot de passe > \033[0;32;42m"); - else - printf("\033[1;36m Type the password > \033[0;32;42m"); - i = 0; - while ((letter = getchar()) != '\n') - password1[i++] = letter; - if (defaultlanguage == 'F') - printf("\033[0m\033[1;36m Ré-entrez le mot de passe > \033[0;32;42m"); - else - printf("\033[0m\033[1;36m Verify the password > \033[0;32;42m"); - i = 0; - while ((letter = getchar()) != '\n') - password2[i++] = letter; - - printf("\033[0m"); - fflush(stdout); - fflush(stdin); - - if (strcmp(password1, password2) != 0) { - if (defaultlanguage == 'F') { - printf("Erreur de vérification du mot de passe: Saisissez le même mot de passe svp.\n"); - ladmin_log("Erreur de vérification du mot de passe: Saisissez le même mot de passe svp." RETCODE); - ladmin_log(" Premier mot de passe: %s, second mot de passe: %s." RETCODE, password1, password2); - } else { - printf("Password verification failed. Please input same password.\n"); - ladmin_log("Password verification failed. Please input same password." RETCODE); - ladmin_log(" First password: %s, second password: %s." RETCODE, password1, password2); - } - return 0; - } - if (defaultlanguage == 'F') { - ladmin_log("Mot de passe saisi: %s." RETCODE, password1); - } else { - ladmin_log("Typed password: %s." RETCODE, password1); - } - strcpy(password, password1); - return 1; -} - -//------------------------------------------------------------------------------------ -// Sub-function: Test of the validity of password (return 0 if incorrect, and 1 if ok) -//------------------------------------------------------------------------------------ -int verify_password(char * password) { - int i; - - for(i = 0; password[i]; i++) { - if (password[i] < 32) { - if (defaultlanguage == 'F') { - printf("Caractère interdit trouvé dans le mot de passe (%d%s caractère).\n", i+1, makeordinal(i+1)); - ladmin_log("Caractère interdit trouvé dans le nom du compte (%d%s caractère)." RETCODE, i+1, makeordinal(i+1)); - } else { - printf("Illegal character found in the password (%d%s character).\n", i+1, makeordinal(i+1)); - ladmin_log("Illegal character found in the password (%d%s character)." RETCODE, i+1, makeordinal(i+1)); - } - return 0; - } - } - - if (strlen(password) < 4) { - if (defaultlanguage == 'F') { - printf("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n"); - ladmin_log("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères." RETCODE); - } else { - printf("Account name is too short. Please input an account name of 4-23 bytes.\n"); - ladmin_log("Account name is too short. Please input an account name of 4-23 bytes." RETCODE); - } - return 0; - } - - if (strlen(password) > 23) { - if (defaultlanguage == 'F') { - printf("Mot de passe trop long. Entrez un mot de passe de 4-23 caractères.\n"); - ladmin_log("Mot de passe trop long. Entrez un mot de passe de 4-23 caractères." RETCODE); - } else { - printf("Password is too long. Please input a password of 4-23 bytes.\n"); - ladmin_log("Password is too long. Please input a password of 4-23 bytes." RETCODE); - } - return 0; - } - - return 1; -} - -//------------------------------------------------------------------ -// Sub-function: Check the name of a command (return complete name) -//----------------------------------------------------------------- -int check_command(char * command) { -// help - if (strncmp(command, "aide", 2) == 0 && strncmp(command, "aide", strlen(command)) == 0) // not 1 letter command: 'aide' or 'add'? - strcpy(command, "aide"); - else if (strncmp(command, "help", 1) == 0 && strncmp(command, "help", strlen(command)) == 0) - strcpy(command, "help"); -// general commands - else if (strncmp(command, "add", 2) == 0 && strncmp(command, "add", strlen(command)) == 0) // not 1 letter command: 'aide' or 'add'? - strcpy(command, "add"); - else if ((strncmp(command, "ban", 3) == 0 && strncmp(command, "ban", strlen(command)) == 0) || - (strncmp(command, "banish", 4) == 0 && strncmp(command, "banish", strlen(command)) == 0)) - strcpy(command, "ban"); - else if ((strncmp(command, "banadd", 4) == 0 && strncmp(command, "banadd", strlen(command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ? - strcmp(command, "ba") == 0) - strcpy(command, "banadd"); - else if ((strncmp(command, "banset", 4) == 0 && strncmp(command, "banset", strlen(command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ? - strcmp(command, "bs") == 0) - strcpy(command, "banset"); - else if (strncmp(command, "block", 2) == 0 && strncmp(command, "block", strlen(command)) == 0) - strcpy(command, "block"); - else if (strncmp(command, "check", 2) == 0 && strncmp(command, "check", strlen(command)) == 0) // not 1 letter command: 'check' or 'create'? - strcpy(command, "check"); - else if (strncmp(command, "create", 2) == 0 && strncmp(command, "create", strlen(command)) == 0) // not 1 letter command: 'check' or 'create'? - strcpy(command, "create"); - else if (strncmp(command, "delete", 1) == 0 && strncmp(command, "delete", strlen(command)) == 0) - strcpy(command, "delete"); - else if ((strncmp(command, "email", 2) == 0 && strncmp(command, "email", strlen(command)) == 0) || // not 1 letter command: 'email', 'end' or 'exit'? - (strncmp(command, "e-mail", 2) == 0 && strncmp(command, "e-mail", strlen(command)) == 0)) - strcpy(command, "email"); - else if (strncmp(command, "getcount", 2) == 0 && strncmp(command, "getcount", strlen(command)) == 0) // not 1 letter command: 'getcount' or 'gm'? - strcpy(command, "getcount"); -// else if (strncmp(command, "gm", 2) == 0 && strncmp(command, "gm", strlen(command)) == 0) // not 1 letter command: 'getcount' or 'gm'? -// strcpy(command, "gm"); -// else if (strncmp(command, "id", 2) == 0 && strncmp(command, "id", strlen(command)) == 0) // not 1 letter command: 'id' or 'info'? -// strcpy(command, "id"); - else if (strncmp(command, "info", 2) == 0 && strncmp(command, "info", strlen(command)) == 0) // not 1 letter command: 'id' or 'info'? - strcpy(command, "info"); -// else if (strncmp(command, "kami", 4) == 0 && strncmp(command, "kami", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'? -// strcpy(command, "kami"); -// else if (strncmp(command, "kamib", 5) == 0 && strncmp(command, "kamib", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'? -// strcpy(command, "kamib"); - else if ((strncmp(command, "language", 2) == 0 && strncmp(command, "language", strlen(command)) == 0)) // not 1 letter command: 'language' or 'list'? - strcpy(command, "language"); - else if ((strncmp(command, "list", 2) == 0 && strncmp(command, "list", strlen(command)) == 0) || // 'list' is default list command // not 1 letter command: 'language' or 'list'? - strcmp(command, "ls") == 0) - strcpy(command, "list"); - else if ((strncmp(command, "listban", 5) == 0 && strncmp(command, "listban", strlen(command)) == 0) || - (strncmp(command, "lsban", 3) == 0 && strncmp(command, "lsban", strlen(command)) == 0) || - strcmp(command, "lb") == 0) - strcpy(command, "listban"); - else if ((strncmp(command, "listgm", 5) == 0 && strncmp(command, "listgm", strlen(command)) == 0) || - (strncmp(command, "lsgm", 3) == 0 && strncmp(command, "lsgm", strlen(command)) == 0) || - strcmp(command, "lg") == 0) - strcpy(command, "listgm"); - else if ((strncmp(command, "listok", 5) == 0 && strncmp(command, "listok", strlen(command)) == 0) || - (strncmp(command, "lsok", 3) == 0 && strncmp(command, "lsok", strlen(command)) == 0) || - strcmp(command, "lo") == 0) - strcpy(command, "listok"); - else if (strncmp(command, "memo", 1) == 0 && strncmp(command, "memo", strlen(command)) == 0) - strcpy(command, "memo"); - else if (strncmp(command, "name", 1) == 0 && strncmp(command, "name", strlen(command)) == 0) - strcpy(command, "name"); - else if ((strncmp(command, "password", 1) == 0 && strncmp(command, "password", strlen(command)) == 0) || - strcmp(command, "passwd") == 0) - strcpy(command, "password"); - else if (strncmp(command, "reloadgm", 1) == 0 && strncmp(command, "reloadgm", strlen(command)) == 0) - strcpy(command, "reloadgm"); - else if (strncmp(command, "search", 3) == 0 && strncmp(command, "search", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'? - strcpy(command, "search"); // not 2 letters command: 'search' or 'sex'? -// else if (strncmp(command, "sex", 3) == 0 && strncmp(command, "sex", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'? -// strcpy(command, "sex"); // not 2 letters command: 'search' or 'sex'? - else if (strncmp(command, "state", 2) == 0 && strncmp(command, "state", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'? - strcpy(command, "state"); - else if ((strncmp(command, "timeadd", 5) == 0 && strncmp(command, "timeadd", strlen(command)) == 0) || // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'? - strcmp(command, "ta") == 0) - strcpy(command, "timeadd"); - else if ((strncmp(command, "timeset", 5) == 0 && strncmp(command, "timeset", strlen(command)) == 0) || // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'? - strcmp(command, "ts") == 0) - strcpy(command, "timeset"); - else if ((strncmp(command, "unban", 5) == 0 && strncmp(command, "unban", strlen(command)) == 0) || - (strncmp(command, "unbanish", 4) == 0 && strncmp(command, "unbanish", strlen(command)) == 0)) - strcpy(command, "unban"); - else if (strncmp(command, "unblock", 4) == 0 && strncmp(command, "unblock", strlen(command)) == 0) - strcpy(command, "unblock"); - else if (strncmp(command, "version", 1) == 0 && strncmp(command, "version", strlen(command)) == 0) - strcpy(command, "version"); - else if (strncmp(command, "who", 1) == 0 && strncmp(command, "who", strlen(command)) == 0) - strcpy(command, "who"); -// quit - else if (strncmp(command, "quit", 1) == 0 && strncmp(command, "quit", strlen(command)) == 0) - strcpy(command, "quit"); - else if (strncmp(command, "exit", 2) == 0 && strncmp(command, "exit", strlen(command)) == 0) // not 1 letter command: 'email', 'end' or 'exit'? - strcpy(command, "exit"); - else if (strncmp(command, "end", 2) == 0 && strncmp(command, "end", strlen(command)) == 0) // not 1 letter command: 'email', 'end' or 'exit'? - strcpy(command, "end"); - - return 0; -} - -//----------------------------------------- -// Sub-function: Display commands of ladmin -//----------------------------------------- -void display_help(char* param, int language) { - char command[1023]; - int i; - - memset(command, '\0', sizeof(command)); - - if (sscanf(param, "%s ", command) < 1 || strlen(command) == 0) - strcpy(command, ""); // any value that is not a command - - if (command[0] == '?') { - if (defaultlanguage == 'F') - strcpy(command, "aide"); - else - strcpy(command, "help"); - } - - // lowercase for command - for (i = 0; command[i]; i++) - command[i] = tolower(command[i]); - - // Analyse of the command - check_command(command); // give complete name to the command - - if (defaultlanguage == 'F') { - ladmin_log("Affichage des commandes ou d'une commande." RETCODE); - } else { - ladmin_log("Displaying of the commands or a command." RETCODE); - } - - if (language == 1) { - if (strcmp(command, "aide") == 0) { - printf("aide/help/?\n"); - printf(" Affiche la description des commandes\n"); - printf("aide/help/? [commande]\n"); - printf(" Affiche la description de la commande specifiée\n"); - } else if (strcmp(command, "help") == 0 ) { - printf("aide/help/?\n"); - printf(" Display the description of the commands\n"); - printf("aide/help/? [command]\n"); - printf(" Display the description of the specified command\n"); -// general commands - } else if (strcmp(command, "add") == 0) { - printf("add <nomcompte> <sexe> <motdepasse>\n"); - printf(" Crée un compte avec l'email par défaut (a@a.com).\n"); - printf(" Concernant le sexe, seule la première lettre compte (F ou M).\n"); - printf(" L'e-mail est a@a.com (e-mail par défaut). C'est comme n'avoir aucun e-mail.\n"); - printf(" Lorsque motdepasse est omis, la saisie se fait sans que la frappe se voit.\n"); - printf(" <exemple> add testname Male testpass\n"); - } else if (strcmp(command, "ban") == 0) { - printf("ban/banish aaaa/mm/jj hh:mm:ss <nom compte>\n"); - printf(" Change la date de fin de bannissement d'un compte.\n"); - printf(" Comme banset, mais <nom compte> est à la fin.\n"); - } else if (strcmp(command, "banadd") == 0) { - printf("banadd <nomcompte> <Modificateur>\n"); - printf(" Ajoute ou soustrait du temps à la date de banissement d'un compte.\n"); - printf(" Les modificateurs sont construits comme suit:\n"); - printf(" Valeur d'ajustement (-1, 1, +1, etc...)\n"); - printf(" Elément modifié:\n"); - printf(" a ou y: année\n"); - printf(" m: mois\n"); - printf(" j ou d: jour\n"); - printf(" h: heure\n"); - printf(" mn: minute\n"); - printf(" s: seconde\n"); - printf(" <exemple> banadd testname +1m-2mn1s-6a\n"); - printf(" Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n"); - printf(" et 6 ans dans le même temps.\n"); - printf("NOTE: Si vous modifez la date de banissement d'un compte non bani,\n"); - printf(" vous indiquez comme date (le moment actuel +- les ajustements)\n"); - } else if (strcmp(command, "banset") == 0) { - printf("banset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n"); - printf(" Change la date de fin de bannissement d'un compte.\n"); - printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); - printf("banset <nomcompte> 0\n"); - printf(" Débanni un compte (0 = de-banni).\n"); - } else if (strcmp(command, "block") == 0) { - printf("block <nom compte>\n"); - printf(" Place le status d'un compte à 5 (You have been blocked by the GM Team).\n"); - printf(" La commande est l'équivalent de state <nom_compte> 5.\n"); - } else if (strcmp(command, "check") == 0) { - printf("check <nomcompte> <motdepasse>\n"); - printf(" Vérifie la validité d'un mot de passe pour un compte\n"); - printf(" NOTE: Le serveur n'enverra jamais un mot de passe.\n"); - printf(" C'est la seule méthode que vous possédez pour savoir\n"); - printf(" si un mot de passe est le bon. L'autre méthode est\n"); - printf(" d'avoir un accès ('physique') au fichier des comptes.\n"); - } else if (strcmp(command, "create") == 0) { - printf("create <nomcompte> <sexe> <email> <motdepasse>\n"); - printf(" Comme la commande add, mais avec l'e-mail en plus.\n"); - printf(" <exemple> create testname Male mon@mail.com testpass\n"); - } else if (strcmp(command, "delete") == 0) { - printf("del <nom compte>\n"); - printf(" Supprime un compte.\n"); - printf(" La commande demande confirmation. Après confirmation, le compte est détruit.\n"); - } else if (strcmp(command, "email") == 0) { - printf("email <nomcompte> <email>\n"); - printf(" Modifie l'e-mail d'un compte.\n"); - } else if (strcmp(command, "getcount") == 0) { - printf("getcount\n"); - printf(" Donne le nombre de joueurs en ligne par serveur de char.\n"); - } else if (strcmp(command, "gm") == 0) { - printf("gm <nomcompte> [Niveau_GM]\n"); - printf(" Modifie le niveau de GM d'un compte.\n"); - printf(" Valeur par défaut: 0 (suppression du niveau de GM).\n"); - printf(" <exemple> gm nomtest 80\n"); - } else if (strcmp(command, "id") == 0) { - printf("id <nom compte>\n"); - printf(" Donne l'id d'un compte.\n"); - } else if (strcmp(command, "info") == 0) { - printf("info <idcompte>\n"); - printf(" Affiche les informations sur un compte.\n"); - } else if (strcmp(command, "kami") == 0) { - printf("kami <message>\n"); - printf(" Envoi un message général sur tous les serveurs de map (en jaune).\n"); - } else if (strcmp(command, "kamib") == 0) { - printf("kamib <message>\n"); - printf(" Envoi un message général sur tous les serveurs de map (en bleu).\n"); - } else if (strcmp(command, "language") == 0) { - printf("language <langue>\n"); - printf(" Change la langue d'affichage.\n"); - printf(" Langues possibles: 'Français' ou 'English'.\n"); - } else if (strcmp(command, "list") == 0) { - printf("list/ls [Premier_id [Dernier_id]]\n"); - printf(" Affiche une liste de comptes.\n"); - printf(" 'Premier_id', 'Dernier_id': indique les identifiants de départ et de fin.\n"); - printf(" La recherche par nom n'est pas possible avec cette commande.\n"); - printf(" <example> list 10 9999999\n"); - } else if (strcmp(command, "listban") == 0) { - printf("listBan/lsBan [Premier_id [Dernier_id]]\n"); - printf(" Comme list/ls, mais seulement pour les comptes avec statut ou bannis.\n"); - } else if (strcmp(command, "listgm") == 0) { - printf("listGM/lsGM [Premier_id [Dernier_id]]\n"); - printf(" Comme list/ls, mais seulement pour les comptes GM.\n"); - } else if (strcmp(command, "listok") == 0) { - printf("listOK/lsOK [Premier_id [Dernier_id]]\n"); - printf(" Comme list/ls, mais seulement pour les comptes sans statut et non bannis.\n"); - } else if (strcmp(command, "memo") == 0) { - printf("memo <nomcompte> <memo>\n"); - printf(" Modifie le mémo d'un compte.\n"); - printf(" 'memo': Il peut avoir jusqu'à 253 caractères (avec des espaces ou non).\n"); - } else if (strcmp(command, "name") == 0) { - printf("name <idcompte>\n"); - printf(" Donne le nom d'un compte.\n"); - } else if (strcmp(command, "password") == 0) { - printf("passwd <nomcompte> <nouveaumotdepasse>\n"); - printf(" Change le mot de passe d'un compte.\n"); - printf(" Lorsque nouveaumotdepasse est omis,\n"); - printf(" la saisie se fait sans que la frappe ne se voit.\n"); - } else if (strcmp(command, "reloadgm") == 0) { - printf("reloadGM\n"); - printf(" Reload GM configuration file\n"); - } else if (strcmp(command, "search") == 0) { - printf("search <expression>\n"); - printf(" Cherche des comptes.\n"); - printf(" Affiche les comptes dont les noms correspondent.\n"); -// printf("search -r/-e/--expr/--regex <expression>\n"); -// printf(" Cherche des comptes par expression regulière.\n"); -// printf(" Affiche les comptes dont les noms correspondent.\n"); - } else if (strcmp(command, "sex") == 0) { - printf("sex <nomcompte> <sexe>\n"); - printf(" Modifie le sexe d'un compte.\n"); - printf(" <exemple> sex testname Male\n"); - } else if (strcmp(command, "state") == 0) { - printf("state <nomcompte> <nouveaustatut> <message_erreur_7>\n"); - printf(" Change le statut d'un compte.\n"); - printf(" 'nouveaustatut': Le statut est le même que celui du packet 0x006a + 1.\n"); - printf(" les possibilités sont:\n"); - printf(" 0 = Compte ok\n"); - printf(" 1 = Unregistered ID\n"); - printf(" 2 = Incorrect Password\n"); - printf(" 3 = This ID is expired\n"); - printf(" 4 = Rejected from Server\n"); - printf(" 5 = You have been blocked by the GM Team\n"); - printf(" 6 = Your Game's EXE file is not the latest version\n"); - printf(" 7 = You are Prohibited to log in until...\n"); - printf(" 8 = Server is jammed due to over populated\n"); - printf(" 9 = No MSG\n"); - printf(" 100 = This ID has been totally erased\n"); - printf(" all other values are 'No MSG', then use state 9 please.\n"); - printf(" 'message_erreur_7': message du code erreur 6 =\n"); - printf(" = Your are Prohibited to log in until... (packet 0x006a)\n"); - } else if (strcmp(command, "timeadd") == 0) { - printf("timeadd <nomcompte> <modificateur>\n"); - printf(" Ajoute/soustrait du temps à la limite de validité d'un compte.\n"); - printf(" Le modificateur est composé comme suit:\n"); - printf(" Valeur modificatrice (-1, 1, +1, etc...)\n"); - printf(" Elément modifié:\n"); - printf(" a ou y: année\n"); - printf(" m: mois\n"); - printf(" j ou d: jour\n"); - printf(" h: heure\n"); - printf(" mn: minute\n"); - printf(" s: seconde\n"); - printf(" <exemple> timeadd testname +1m-2mn1s-6a\n"); - printf(" Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n"); - printf(" et 6 ans dans le même temps.\n"); - printf("NOTE: Vous ne pouvez pas modifier une limite de validité illimitée. Si vous\n"); - printf(" désirez le faire, c'est que vous voulez probablement créer un limite de\n"); - printf(" validité limitée. Donc, en premier, fixé une limite de valitidé.\n"); - } else if (strcmp(command, "timeadd") == 0) { - printf("timeset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n"); - printf(" Change la limite de validité d'un compte.\n"); - printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); - printf("timeset <nomcompte> 0\n"); - printf(" Donne une limite de validité illimitée (0 = illimitée).\n"); - } else if (strcmp(command, "unban") == 0) { - printf("unban/unbanish <nom compte>\n"); - printf(" Ote le banissement d'un compte.\n"); - printf(" La commande est l'équivalent de banset <nom_compte> 0.\n"); - } else if (strcmp(command, "unblock") == 0) { - printf("unblock <nom compte>\n"); - printf(" Place le status d'un compte à 0 (Compte ok).\n"); - printf(" La commande est l'équivalent de state <nom_compte> 0.\n"); - } else if (strcmp(command, "version") == 0) { - printf("version\n"); - printf(" Affiche la version du login-serveur.\n"); - } else if (strcmp(command, "who") == 0) { - printf("who <nom compte>\n"); - printf(" Affiche les informations sur un compte.\n"); -// quit - } else if (strcmp(command, "quit") == 0 || - strcmp(command, "exit") == 0 || - strcmp(command, "end") == 0) { - printf("quit/end/exit\n"); - printf(" Fin du programme d'administration.\n"); -// unknown command - } else { - if (strlen(command) > 0) - printf("Commande inconnue [%s] pour l'aide. Affichage de toutes les commandes.\n", command); - printf(" aide/help/? -- Affiche cet aide\n"); - printf(" aide/help/? [commande] -- Affiche l'aide de la commande\n"); - printf(" add <nomcompte> <sexe> <motdepasse> -- Crée un compte (sans email)\n"); - printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom compte> -- Fixe la date finale de banismnt\n"); - printf(" banadd/ba <nomcompte> <modificateur> -- Ajout/soustrait du temps à la\n"); - printf(" exemple: ba moncompte +1m-2mn1s-2y date finale de banissement\n"); - printf(" banset/bs <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la date fin de banisemnt\n"); - printf(" banset/bs <nomcompte> 0 -- Dé-banis un compte.\n"); - printf(" block <nom compte> -- Mets le status d'un compte à 5 (blocked by the GM Team)\n"); - printf(" check <nomcompte> <motdepasse> -- Vérifie un mot de passe d'un compte\n"); - printf(" create <nomcompte> <sexe> <email> <motdepasse> -- Crée un compte (avec email)\n"); - printf(" del <nom compte> -- Supprime un compte\n"); - printf(" email <nomcompte> <email> -- Modifie l'e-mail d'un compte\n"); - printf(" getcount -- Donne le nb de joueurs en ligne\n"); - printf(" gm <nomcompte> [Niveau_GM] -- Modifie le niveau de GM d'un compte\n"); - printf(" id <nom compte> -- Donne l'id d'un compte\n"); - printf(" info <idcompte> -- Affiche les infos sur un compte\n"); - printf(" kami <message> -- Envoi un message général (en jaune)\n"); - printf(" kamib <message> -- Envoi un message général (en bleu)\n"); - printf(" language <langue> -- Change la langue d'affichage.\n"); - printf(" list/ls [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n"); - printf(" listBan/lsBan [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n"); - printf(" avec un statut ou bannis\n"); - printf(" listGM/lsGM [Premier_id [Dernier_id] ] -- Affiche une liste de comptes GM\n"); - printf(" listOK/lsOK [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n"); - printf(" sans status et non bannis\n"); - printf(" memo <nomcompte> <memo> -- Modifie le memo d'un compte\n"); - printf(" name <idcompte> -- Donne le nom d'un compte\n"); - printf(" passwd <nomcompte> <nouveaumotdepasse> -- Change le mot de passe d'un compte\n"); - printf(" quit/end/exit -- Fin du programme d'administation\n"); - printf(" reloadGM -- Recharger le fichier de config des GM\n"); - printf(" search <expression> -- Cherche des comptes\n"); -// printf(" search -e/-r/--expr/--regex <expression> -- Cherche des comptes par REGEX\n"); - printf(" sex <nomcompte> <sexe> -- Modifie le sexe d'un compte\n"); - printf(" state <nomcompte> <nouveaustatut> <messageerr7> -- Change le statut d'1 compte\n"); - printf(" timeadd/ta <nomcompte> <modificateur> -- Ajout/soustrait du temps à la\n"); - printf(" exemple: ta moncompte +1m-2mn1s-2y limite de validité\n"); - printf(" timeset/ts <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la limite de validité\n"); - printf(" timeset/ts <nomcompte> 0 -- limite de validité = illimitée\n"); - printf(" unban/unbanish <nom compte> -- Ote le banissement d'un compte\n"); - printf(" unblock <nom compte> -- Mets le status d'un compte à 0 (Compte ok)\n"); - printf(" version -- Donne la version du login-serveur\n"); - printf(" who <nom compte> -- Affiche les infos sur un compte\n"); - printf(" Note: Pour les noms de compte avec des espaces, tapez \"<nom compte>\" (ou ').\n"); - } - } else { - if (strcmp(command, "aide") == 0) { - printf("aide/help/?\n"); - printf(" Display the description of the commands\n"); - printf("aide/help/? [command]\n"); - printf(" Display the description of the specified command\n"); - } else if (strcmp(command, "help") == 0 ) { - printf("aide/help/?\n"); - printf(" Display the description of the commands\n"); - printf("aide/help/? [command]\n"); - printf(" Display the description of the specified command\n"); -// general commands - } else if (strcmp(command, "add") == 0) { - printf("add <account_name> <sex> <password>\n"); - printf(" Create an account with the default email (a@a.com).\n"); - printf(" Concerning the sex, only the first letter is used (F or M).\n"); - printf(" The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.\n"); - printf(" When the password is omitted,\n"); - printf(" the input is done without displaying of the pressed keys.\n"); - printf(" <example> add testname Male testpass\n"); - } else if (strcmp(command, "ban") == 0) { - printf("ban/banish yyyy/mm/dd hh:mm:ss <account name>\n"); - printf(" Changes the final date of a banishment of an account.\n"); - printf(" Like banset, but <account name> is at end.\n"); - } else if (strcmp(command, "banadd") == 0) { - printf("banadd <account_name> <modifier>\n"); - printf(" Adds or substracts time from the final date of a banishment of an account.\n"); - printf(" Modifier is done as follows:\n"); - printf(" Adjustment value (-1, 1, +1, etc...)\n"); - printf(" Modified element:\n"); - printf(" a or y: year\n"); - printf(" m: month\n"); - printf(" j or d: day\n"); - printf(" h: hour\n"); - printf(" mn: minute\n"); - printf(" s: second\n"); - printf(" <example> banadd testname +1m-2mn1s-6y\n"); - printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); - printf(" and 6 years at the same time.\n"); - printf("NOTE: If you modify the final date of a non-banished account,\n"); - printf(" you fix the final date to (actual time +- adjustments)\n"); - } else if (strcmp(command, "banset") == 0) { - printf("banset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); - printf(" Changes the final date of a banishment of an account.\n"); - printf(" Default time [hh:mm:ss]: 23:59:59.\n"); - printf("banset <account_name> 0\n"); - printf(" Set a non-banished account (0 = unbanished).\n"); - } else if (strcmp(command, "block") == 0) { - printf("block <account name>\n"); - printf(" Set state 5 (You have been blocked by the GM Team) to an account.\n"); - printf(" This command works like state <account_name> 5.\n"); - } else if (strcmp(command, "check") == 0) { - printf("check <account_name> <password>\n"); - printf(" Check the validity of a password for an account.\n"); - printf(" NOTE: Server will never sends back a password.\n"); - printf(" It's the only method you have to know if a password is correct.\n"); - printf(" The other method is to have a ('physical') access to the accounts file.\n"); - } else if (strcmp(command, "create") == 0) { - printf("create <account_name> <sex> <email> <password>\n"); - printf(" Like the 'add' command, but with e-mail moreover.\n"); - printf(" <example> create testname Male my@mail.com testpass\n"); - } else if (strcmp(command, "delete") == 0) { - printf("del <account name>\n"); - printf(" Remove an account.\n"); - printf(" This order requires confirmation. After confirmation, the account is deleted.\n"); - } else if (strcmp(command, "email") == 0) { - printf("email <account_name> <email>\n"); - printf(" Modify the e-mail of an account.\n"); - } else if (strcmp(command, "getcount") == 0) { - printf("getcount\n"); - printf(" Give the number of players online on all char-servers.\n"); - } else if (strcmp(command, "gm") == 0) { - printf("gm <account_name> [GM_level]\n"); - printf(" Modify the GM level of an account.\n"); - printf(" Default value remove GM level (GM level = 0).\n"); - printf(" <example> gm testname 80\n"); - } else if (strcmp(command, "id") == 0) { - printf("id <account name>\n"); - printf(" Give the id of an account.\n"); - } else if (strcmp(command, "info") == 0) { - printf("info <account_id>\n"); - printf(" Display complete information of an account.\n"); - } else if (strcmp(command, "kami") == 0) { - printf("kami <message>\n"); - printf(" Sends a broadcast message on all map-server (in yellow).\n"); - } else if (strcmp(command, "kamib") == 0) { - printf("kamib <message>\n"); - printf(" Sends a broadcast message on all map-server (in blue).\n"); - } else if (strcmp(command, "language") == 0) { - printf("language <language>\n"); - printf(" Change the language of displaying.\n"); - printf(" Possible languages: Français or English.\n"); - } else if (strcmp(command, "list") == 0) { - printf("list/ls [start_id [end_id]]\n"); - printf(" Display a list of accounts.\n"); - printf(" 'start_id', 'end_id': indicate end and start identifiers.\n"); - printf(" Research by name is not possible with this command.\n"); - printf(" <example> list 10 9999999\n"); - } else if (strcmp(command, "listban") == 0) { - printf("listBan/lsBan [start_id [end_id]]\n"); - printf(" Like list/ls, but only for accounts with state or banished.\n"); - } else if (strcmp(command, "listgm") == 0) { - printf("listGM/lsGM [start_id [end_id]]\n"); - printf(" Like list/ls, but only for GM accounts.\n"); - } else if (strcmp(command, "listok") == 0) { - printf("listOK/lsOK [start_id [end_id]]\n"); - printf(" Like list/ls, but only for accounts without state and not banished.\n"); - } else if (strcmp(command, "memo") == 0) { - printf("memo <account_name> <memo>\n"); - printf(" Modify the memo of an account.\n"); - printf(" 'memo': it can have until 253 characters (with spaces or not).\n"); - } else if (strcmp(command, "name") == 0) { - printf("name <account_id>\n"); - printf(" Give the name of an account.\n"); - } else if (strcmp(command, "password") == 0) { - printf("passwd <account_name> <new_password>\n"); - printf(" Change the password of an account.\n"); - printf(" When new password is omitted,\n"); - printf(" the input is done without displaying of the pressed keys.\n"); - } else if (strcmp(command, "reloadgm") == 0) { - printf("reloadGM\n"); - printf(" Reload GM configuration file\n"); - } else if (strcmp(command, "search") == 0) { - printf("search <expression>\n"); - printf(" Seek accounts.\n"); - printf(" Displays the accounts whose names correspond.\n"); -// printf("search -r/-e/--expr/--regex <expression>\n"); -// printf(" Seek accounts by regular expression.\n"); -// printf(" Displays the accounts whose names correspond.\n"); - } else if (strcmp(command, "sex") == 0) { - printf("sex <account_name> <sex>\n"); - printf(" Modify the sex of an account.\n"); - printf(" <example> sex testname Male\n"); - } else if (strcmp(command, "state") == 0) { - printf("state <account_name> <new_state> <error_message_#7>\n"); - printf(" Change the state of an account.\n"); - printf(" 'new_state': state is the state of the packet 0x006a + 1.\n"); - printf(" The possibilities are:\n"); - printf(" 0 = Account ok\n"); - printf(" 1 = Unregistered ID\n"); - printf(" 2 = Incorrect Password\n"); - printf(" 3 = This ID is expired\n"); - printf(" 4 = Rejected from Server\n"); - printf(" 5 = You have been blocked by the GM Team\n"); - printf(" 6 = Your Game's EXE file is not the latest version\n"); - printf(" 7 = You are Prohibited to log in until...\n"); - printf(" 8 = Server is jammed due to over populated\n"); - printf(" 9 = No MSG\n"); - printf(" 100 = This ID has been totally erased\n"); - printf(" all other values are 'No MSG', then use state 9 please.\n"); - printf(" 'error_message_#7': message of the code error 6\n"); - printf(" = Your are Prohibited to log in until... (packet 0x006a)\n"); - } else if (strcmp(command, "timeadd") == 0) { - printf("timeadd <account_name> <modifier>\n"); - printf(" Adds or substracts time from the validity limit of an account.\n"); - printf(" Modifier is done as follows:\n"); - printf(" Adjustment value (-1, 1, +1, etc...)\n"); - printf(" Modified element:\n"); - printf(" a or y: year\n"); - printf(" m: month\n"); - printf(" j or d: day\n"); - printf(" h: hour\n"); - printf(" mn: minute\n"); - printf(" s: second\n"); - printf(" <example> timeadd testname +1m-2mn1s-6y\n"); - printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); - printf(" and 6 years at the same time.\n"); - printf("NOTE: You can not modify a unlimited validity limit.\n"); - printf(" If you want modify it, you want probably create a limited validity limit.\n"); - printf(" So, at first, you must set the validity limit to a date/time.\n"); - } else if (strcmp(command, "timeadd") == 0) { - printf("timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); - printf(" Changes the validity limit of an account.\n"); - printf(" Default time [hh:mm:ss]: 23:59:59.\n"); - printf("timeset <account_name> 0\n"); - printf(" Gives an unlimited validity limit (0 = unlimited).\n"); - } else if (strcmp(command, "unban") == 0) { - printf("unban/unbanish <account name>\n"); - printf(" Remove the banishment of an account.\n"); - printf(" This command works like banset <account_name> 0.\n"); - } else if (strcmp(command, "unblock") == 0) { - printf("unblock <account name>\n"); - printf(" Set state 0 (Account ok) to an account.\n"); - printf(" This command works like state <account_name> 0.\n"); - } else if (strcmp(command, "version") == 0) { - printf("version\n"); - printf(" Display the version of the login-server.\n"); - } else if (strcmp(command, "who") == 0) { - printf("who <account name>\n"); - printf(" Displays complete information of an account.\n"); -// quit - } else if (strcmp(command, "quit") == 0 || - strcmp(command, "exit") == 0 || - strcmp(command, "end") == 0) { - printf("quit/end/exit\n"); - printf(" End of the program of administration.\n"); -// unknown command - } else { - if (strlen(command) > 0) - printf("Unknown command [%s] for help. Displaying of all commands.\n", command); - printf(" aide/help/? -- Display this help\n"); - printf(" aide/help/? [command] -- Display the help of the command\n"); - printf(" add <account_name> <sex> <password> -- Create an account with default email\n"); - printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name> -- Change final date of a ban\n"); - printf(" banadd/ba <account_name> <modifier> -- Add or substract time from the final\n"); - printf(" example: ba apple +1m-2mn1s-2y date of a banishment of an account\n"); - printf(" banset/bs <account_name> yyyy/mm/dd [hh:mm:ss] -- Change final date of a ban\n"); - printf(" banset/bs <account_name> 0 -- Un-banish an account\n"); - printf(" block <account name> -- Set state 5 (blocked by the GM Team) to an account\n"); - printf(" check <account_name> <password> -- Check the validity of a password\n"); - printf(" create <account_name> <sex> <email> <passwrd> -- Create an account with email\n"); - printf(" del <account name> -- Remove an account\n"); - printf(" email <account_name> <email> -- Modify an email of an account\n"); - printf(" getcount -- Give the number of players online\n"); - printf(" gm <account_name> [GM_level] -- Modify the GM level of an account\n"); - printf(" id <account name> -- Give the id of an account\n"); - printf(" info <account_id> -- Display all information of an account\n"); - printf(" kami <message> -- Sends a broadcast message (in yellow)\n"); - printf(" kamib <message> -- Sends a broadcast message (in blue)\n"); - printf(" language <language> -- Change the language of displaying.\n"); - printf(" list/ls [First_id [Last_id]] -- Display a list of accounts\n"); - printf(" listBan/lsBan [First_id [Last_id] ] -- Display a list of accounts\n"); - printf(" with state or banished\n"); - printf(" listGM/lsGM [First_id [Last_id]] -- Display a list of GM accounts\n"); - printf(" listOK/lsOK [First_id [Last_id] ] -- Display a list of accounts\n"); - printf(" without state and not banished\n"); - printf(" memo <account_name> <memo> -- Modify the memo of an account\n"); - printf(" name <account_id> -- Give the name of an account\n"); - printf(" passwd <account_name> <new_password> -- Change the password of an account\n"); - printf(" quit/end/exit -- End of the program of administation\n"); - printf(" reloadGM -- Reload GM configuration file\n"); - printf(" search <expression> -- Seek accounts\n"); -// printf(" search -e/-r/--expr/--regex <expressn> -- Seek accounts by regular-expression\n"); - printf(" sex <nomcompte> <sexe> -- Modify the sex of an account\n"); - printf(" state <account_name> <new_state> <error_message_#7> -- Change the state\n"); - printf(" timeadd/ta <account_name> <modifier> -- Add or substract time from the\n"); - printf(" example: ta apple +1m-2mn1s-2y validity limit of an account\n"); - printf(" timeset/ts <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit\n"); - printf(" timeset/ts <account_name> 0 -- Give a unlimited validity limit\n"); - printf(" unban/unbanish <account name> -- Remove the banishment of an account\n"); - printf(" unblock <account name> -- Set state 0 (Account ok) to an account\n"); - printf(" version -- Gives the version of the login-server\n"); - printf(" who <account name> -- Display all information of an account\n"); - printf(" who <account name> -- Display all information of an account\n"); - printf(" Note: To use spaces in an account name, type \"<account name>\" (or ').\n"); - } - } -} - -//----------------------------- -// Sub-function: add an account -//----------------------------- -int addaccount(char* param, int emailflag) { - char name[1023], sex[1023], email[1023], password[1023]; -// int i; - - memset(name, '\0', sizeof(name)); - memset(sex, '\0', sizeof(sex)); - memset(email, '\0', sizeof(email)); - memset(password, '\0', sizeof(password)); - - if (emailflag == 0) { // add command - if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, sex, password) < 2 && // password can be void - sscanf(param, "'%[^']' %s %[^\r\n]", name, sex, password) < 2 && // password can be void - sscanf(param, "%s %s %[^\r\n]", name, sex, password) < 2) { // password can be void - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte, un sexe et un mot de passe svp.\n"); - printf("<exemple> add nomtest Male motdepassetest\n"); - ladmin_log("Nombre incorrect de paramètres pour créer un compte (commande 'add')." RETCODE); - } else { - printf("Please input an account name, a sex and a password.\n"); - printf("<example> add testname Male testpass\n"); - ladmin_log("Incomplete parameters to create an account ('add' command)." RETCODE); - } - return 136; - } - strcpy(email, "a@a.com"); // default email - } else { // 1: create command - if (sscanf(param, "\"%[^\"]\" %s %s %[^\r\n]", name, sex, email, password) < 3 && // password can be void - sscanf(param, "'%[^']' %s %s %[^\r\n]", name, sex, email, password) < 3 && // password can be void - sscanf(param, "%s %s %s %[^\r\n]", name, sex, email, password) < 3) { // password can be void - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte, un sexe et un mot de passe svp.\n"); - printf("<exemple> create nomtest Male mo@mail.com motdepassetest\n"); - ladmin_log("Nombre incorrect de paramètres pour créer un compte (commande 'create')." RETCODE); - } else { - printf("Please input an account name, a sex and a password.\n"); - printf("<example> create testname Male my@mail.com testpass\n"); - ladmin_log("Incomplete parameters to create an account ('create' command)." RETCODE); - } - return 136; - } - } - if (verify_accountname(name) == 0) { - return 102; - } - -/* for(i = 0; name[i]; i++) { - if (strchr("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz-_", name[i]) == NULL) { - if (defaultlanguage == 'F') { - printf("Caractère interdit (%c) trouvé dans le nom du compte (%d%s caractère).\n", name[i], i+1, makeordinal(i+1)); - ladmin_log("Caractère interdit (%c) trouvé dans le nom du compte (%d%s caractère)." RETCODE, name[i], i+1, makeordinal(i+1)); - } else { - printf("Illegal character (%c) found in the account name (%d%s character).\n", name[i], i+1, makeordinal(i+1)); - ladmin_log("Illegal character (%c) found in the account name (%d%s character)." RETCODE, name[i], i+1, makeordinal(i+1)); - } - return 101; - } - }*/ - - sex[0] = toupper(sex[0]); - if (strchr("MF", sex[0]) == NULL) { - if (defaultlanguage == 'F') { - printf("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex); - ladmin_log("Sexe incorrect [%s]. Entrez M ou F svp." RETCODE, sex); - } else { - printf("Illegal gender [%s]. Please input M or F.\n", sex); - ladmin_log("Illegal gender [%s]. Please input M or F." RETCODE, sex); - } - return 103; - } - - if (strlen(email) < 3) { - if (defaultlanguage == 'F') { - printf("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email); - ladmin_log("Email trop courte [%s]. Entrez une e-mail valide svp." RETCODE, email); - } else { - printf("Email is too short [%s]. Please input a valid e-mail.\n", email); - ladmin_log("Email is too short [%s]. Please input a valid e-mail." RETCODE, email); - } - return 109; - } - if (strlen(email) > 39) { - if (defaultlanguage == 'F') { - printf("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n", email); - ladmin_log("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp." RETCODE, email); - } else { - printf("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email); - ladmin_log("Email is too long [%s]. Please input an e-mail with 39 bytes at the most." RETCODE, email); - } - return 109; - } - if (e_mail_check(email) == 0) { - if (defaultlanguage == 'F') { - printf("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email); - ladmin_log("Email incorrecte [%s]. Entrez une e-mail valide svp." RETCODE, email); - } else { - printf("Invalid email [%s]. Please input a valid e-mail.\n", email); - ladmin_log("Invalid email [%s]. Please input a valid e-mail." RETCODE, email); - } - return 109; - } - - if (strlen(password) == 0) { - if (typepasswd(password) == 0) - return 108; - } - if (verify_password(password) == 0) - return 104; - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour créer un compte." RETCODE); - } else { - ladmin_log("Request to login-server to create an account." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7930; - memcpy(WFIFOP(login_fd,2), name, 24); - memcpy(WFIFOP(login_fd,26), password, 24); - WFIFOB(login_fd,50) = sex[0]; - memcpy(WFIFOP(login_fd,51), email, 40); - WFIFOSET(login_fd,91); - bytes_to_read = 1; - - return 0; -} - -//--------------------------------------------------------------------------------- -// Sub-function: Add/substract time to the final date of a banishment of an account -//--------------------------------------------------------------------------------- -int banaddaccount(char* param) { - char name[1023], modif[1023]; - int year, month, day, hour, minute, second; - char * p_modif; - int value, i; - - memset(name, '\0', sizeof(name)); - memset(modif, '\0', sizeof(modif)); - year = month = day = hour = minute = second = 0; - - if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 && - sscanf(param, "'%[^']' %[^\r\n]", name, modif) < 2 && - sscanf(param, "%s %[^\r\n]", name, modif) < 2) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte et un modificateur svp.\n"); - printf(" <exemple> banadd nomtest +1m-2mn1s-6y\n"); - printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); - printf(" et 6 ans dans le même temps.\n"); - ladmin_log("Nombre incorrect de paramètres pour modifier la fin de ban d'un compte (commande 'banadd')." RETCODE); - } else { - printf("Please input an account name and a modifier.\n"); - printf(" <example>: banadd testname +1m-2mn1s-6y\n"); - printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); - printf(" and 6 years at the same time.\n"); - ladmin_log("Incomplete parameters to modify the ban date/time of an account ('banadd' command)." RETCODE); - } - return 136; - } - if (verify_accountname(name) == 0) { - return 102; - } - - // lowercase for modif - for (i = 0; modif[i]; i++) - modif[i] = tolower(modif[i]); - p_modif = modif; - while (strlen(p_modif) > 0) { - value = atoi(p_modif); - if (value == 0) { - p_modif++; - } else { - if (p_modif[0] == '-' || p_modif[0] == '+') - p_modif++; - while (strlen(p_modif) > 0 && p_modif[0] >= '0' && p_modif[0] <= '9') { - p_modif++; - } - if (p_modif[0] == 's') { - second = value; - p_modif++; - } else if (p_modif[0] == 'm' && p_modif[1] == 'n') { - minute = value; - p_modif += 2; - } else if (p_modif[0] == 'h') { - hour = value; - p_modif++; - } else if (p_modif[0] == 'd' || p_modif[0] == 'j') { - day = value; - p_modif += 2; - } else if (p_modif[0] == 'm') { - month = value; - p_modif++; - } else if (p_modif[0] == 'y' || p_modif[0] == 'a') { - year = value; - p_modif++; - } else { - p_modif++; - } - } - } - - if (defaultlanguage == 'F') { - printf(" année: %d\n", year); - printf(" mois: %d\n", month); - printf(" jour: %d\n", day); - printf(" heure: %d\n", hour); - printf(" minute: %d\n", minute); - printf(" seconde: %d\n", second); - } else { - printf(" year: %d\n", year); - printf(" month: %d\n", month); - printf(" day: %d\n", day); - printf(" hour: %d\n", hour); - printf(" minute: %d\n", minute); - printf(" second: %d\n", second); - } - - if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0 && second == 0) { - if (defaultlanguage == 'F') { - printf("Vous devez entrer un ajustement avec cette commande, svp:\n"); - printf(" Valeur d'ajustement (-1, 1, +1, etc...)\n"); - printf(" Element modifié:\n"); - printf(" a ou y: année\n"); - printf(" m: mois\n"); - printf(" j ou d: jour\n"); - printf(" h: heure\n"); - printf(" mn: minute\n"); - printf(" s: seconde\n"); - printf(" <exemple> banadd nomtest +1m-2mn1s-6y\n"); - printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); - printf(" et 6 ans dans le même temps.\n"); - ladmin_log("Aucun ajustement n'est pas un ajustement (commande 'banadd')." RETCODE); - } else { - printf("Please give an adjustment with this command:\n"); - printf(" Adjustment value (-1, 1, +1, etc...)\n"); - printf(" Modified element:\n"); - printf(" a or y: year\n"); - printf(" m: month\n"); - printf(" j or d: day\n"); - printf(" h: hour\n"); - printf(" mn: minute\n"); - printf(" s: second\n"); - printf(" <example> banadd testname +1m-2mn1s-6y\n"); - printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); - printf(" and 6 years at the same time.\n"); - ladmin_log("No adjustment isn't an adjustment ('banadd' command)." RETCODE); - } - return 137; - } - if (year > 127 || year < -127) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement d'années correct (de -127 à 127), svp.\n"); - ladmin_log("Ajustement de l'année hors norme (commande 'banadd')." RETCODE); - } else { - printf("Please give a correct adjustment for the years (from -127 to 127).\n"); - ladmin_log("Abnormal adjustement for the year ('banadd' command)." RETCODE); - } - return 137; - } - if (month > 255 || month < -255) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement de mois correct (de -255 à 255), svp.\n"); - ladmin_log("Ajustement du mois hors norme (commande 'banadd')." RETCODE); - } else { - printf("Please give a correct adjustment for the months (from -255 to 255).\n"); - ladmin_log("Abnormal adjustement for the month ('banadd' command)." RETCODE); - } - return 137; - } - if (day > 32767 || day < -32767) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n"); - ladmin_log("Ajustement des jours hors norme (commande 'banadd')." RETCODE); - } else { - printf("Please give a correct adjustment for the days (from -32767 to 32767).\n"); - ladmin_log("Abnormal adjustement for the days ('banadd' command)." RETCODE); - } - return 137; - } - if (hour > 32767 || hour < -32767) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n"); - ladmin_log("Ajustement des heures hors norme (commande 'banadd')." RETCODE); - } else { - printf("Please give a correct adjustment for the hours (from -32767 to 32767).\n"); - ladmin_log("Abnormal adjustement for the hours ('banadd' command)." RETCODE); - } - return 137; - } - if (minute > 32767 || minute < -32767) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n"); - ladmin_log("Ajustement des minutes hors norme (commande 'banadd')." RETCODE); - } else { - printf("Please give a correct adjustment for the minutes (from -32767 to 32767).\n"); - ladmin_log("Abnormal adjustement for the minutes ('banadd' command)." RETCODE); - } - return 137; - } - if (second > 32767 || second < -32767) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n"); - ladmin_log("Ajustement des secondes hors norme (commande 'banadd')." RETCODE); - } else { - printf("Please give a correct adjustment for the seconds (from -32767 to 32767).\n"); - ladmin_log("Abnormal adjustement for the seconds ('banadd' command)." RETCODE); - } - return 137; - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour modifier la date d'un bannissement." RETCODE); - } else { - ladmin_log("Request to login-server to modify a ban date/time." RETCODE); - } - - WFIFOW(login_fd,0) = 0x794c; - memcpy(WFIFOP(login_fd,2), name, 24); - WFIFOW(login_fd,26) = (short)year; - WFIFOW(login_fd,28) = (short)month; - WFIFOW(login_fd,30) = (short)day; - WFIFOW(login_fd,32) = (short)hour; - WFIFOW(login_fd,34) = (short)minute; - WFIFOW(login_fd,36) = (short)second; - WFIFOSET(login_fd,38); - bytes_to_read = 1; - - return 0; -} - -//----------------------------------------------------------------------- -// Sub-function of sub-function banaccount, unbanaccount or bansetaccount -// Set the final date of a banishment of an account -//----------------------------------------------------------------------- -int bansetaccountsub(char* name, char* date, char* time) { - int year, month, day, hour, minute, second; - time_t ban_until_time; // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban) - struct tm *tmtime; - - year = month = day = hour = minute = second = 0; - ban_until_time = 0; - tmtime = localtime(&ban_until_time); // initialize - - if (verify_accountname(name) == 0) { - return 102; - } - - if (atoi(date) != 0 && - ((sscanf(date, "%d/%d/%d", &year, &month, &day) < 3 && - sscanf(date, "%d-%d-%d", &year, &month, &day) < 3 && - sscanf(date, "%d.%d.%d", &year, &month, &day) < 3) || - sscanf(time, "%d:%d:%d", &hour, &minute, &second) < 3)) { - if (defaultlanguage == 'F') { - printf("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n"); - printf("Vous pouvez aussi mettre 0 à la place si vous utilisez la commande 'banset'.\n"); - ladmin_log("Format incorrect pour la date/heure (commande'banset' ou 'ban')." RETCODE); - } else { - printf("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n"); - printf("You can imput 0 instead of if you use 'banset' command.\n"); - ladmin_log("Invalid format for the date/time ('banset' or 'ban' command)." RETCODE); - } - return 102; - } - - if (atoi(date) == 0) { - ban_until_time = 0; - } else { - if (year < 70) { - year = year + 100; - } - if (year >= 1900) { - year = year - 1900; - } - if (month < 1 || month > 12) { - if (defaultlanguage == 'F') { - printf("Entrez un mois correct svp (entre 1 et 12).\n"); - ladmin_log("Mois incorrect pour la date (command 'banset' ou 'ban')." RETCODE); - } else { - printf("Please give a correct value for the month (from 1 to 12).\n"); - ladmin_log("Invalid month for the date ('banset' or 'ban' command)." RETCODE); - } - return 102; - } - month = month - 1; - if (day < 1 || day > 31) { - if (defaultlanguage == 'F') { - printf("Entrez un jour correct svp (entre 1 et 31).\n"); - ladmin_log("Jour incorrect pour la date (command 'banset' ou 'ban')." RETCODE); - } else { - printf("Please give a correct value for the day (from 1 to 31).\n"); - ladmin_log("Invalid day for the date ('banset' or 'ban' command)." RETCODE); - } - return 102; - } - if (((month == 3 || month == 5 || month == 8 || month == 10) && day > 30) || - (month == 1 && day > 29)) { - if (defaultlanguage == 'F') { - printf("Entrez un jour correct en fonction du mois (%d) svp.\n", month); - ladmin_log("Jour incorrect pour ce mois correspondant (command 'banset' ou 'ban')." RETCODE); - } else { - printf("Please give a correct value for a day of this month (%d).\n", month); - ladmin_log("Invalid day for this month ('banset' or 'ban' command)." RETCODE); - } - return 102; - } - if (hour < 0 || hour > 23) { - if (defaultlanguage == 'F') { - printf("Entrez une heure correcte svp (entre 0 et 23).\n"); - ladmin_log("Heure incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE); - } else { - printf("Please give a correct value for the hour (from 0 to 23).\n"); - ladmin_log("Invalid hour for the time ('banset' or 'ban' command)." RETCODE); - } - return 102; - } - if (minute < 0 || minute > 59) { - if (defaultlanguage == 'F') { - printf("Entrez des minutes correctes svp (entre 0 et 59).\n"); - ladmin_log("Minute incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE); - } else { - printf("Please give a correct value for the minutes (from 0 to 59).\n"); - ladmin_log("Invalid minute for the time ('banset' or 'ban' command)." RETCODE); - } - return 102; - } - if (second < 0 || second > 59) { - if (defaultlanguage == 'F') { - printf("Entrez des secondes correctes svp (entre 0 et 59).\n"); - ladmin_log("Seconde incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE); - } else { - printf("Please give a correct value for the seconds (from 0 to 59).\n"); - ladmin_log("Invalid second for the time ('banset' or 'ban' command)." RETCODE); - } - return 102; - } - tmtime->tm_year = year; - tmtime->tm_mon = month; - tmtime->tm_mday = day; - tmtime->tm_hour = hour; - tmtime->tm_min = minute; - tmtime->tm_sec = second; - tmtime->tm_isdst = -1; // -1: no winter/summer time modification - ban_until_time = mktime(tmtime); - if (ban_until_time == -1) { - if (defaultlanguage == 'F') { - printf("Date incorrecte.\n"); - printf("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n"); - printf("Vous pouvez aussi mettre 0 à la place si vous utilisez la commande 'banset'.\n"); - ladmin_log("Date incorrecte. (command 'banset' ou 'ban')." RETCODE); - } else { - printf("Invalid date.\n"); - printf("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n"); - printf("You can imput 0 instead of if you use 'banset' command.\n"); - ladmin_log("Invalid date. ('banset' or 'ban' command)." RETCODE); - } - return 102; - } - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour fixer un ban." RETCODE); - } else { - ladmin_log("Request to login-server to set a ban." RETCODE); - } - - WFIFOW(login_fd,0) = 0x794a; - memcpy(WFIFOP(login_fd,2), name, 24); - WFIFOL(login_fd,26) = (int)ban_until_time; - WFIFOSET(login_fd,30); - bytes_to_read = 1; - - return 0; -} - -//--------------------------------------------------------------------- -// Sub-function: Set the final date of a banishment of an account (ban) -//--------------------------------------------------------------------- -int banaccount(char* param) { - char name[1023], date[1023], time[1023]; - - memset(name, '\0', sizeof(name)); - memset(date, '\0', sizeof(date)); - memset(time, '\0', sizeof(time)); - - if (sscanf(param, "%s %s \"%[^\"]\"", date, time, name) < 3 && - sscanf(param, "%s %s '%[^']'", date, time, name) < 3 && - sscanf(param, "%s %s %[^\r\n]", date, time, name) < 3) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte, une date et une heure svp.\n"); - printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n"); - printf(" banset <nom_du_compte> 0 (0 = dé-bani)\n"); - printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n"); - printf(" unban/unbanish <nom du compte>\n"); - printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); - ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'banset' ou 'ban')." RETCODE); - } else { - printf("Please input an account name, a date and a hour.\n"); - printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); - printf(" banset <account_name> 0 (0 = un-banished)\n"); - printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name>\n"); - printf(" unban/unbanish <account name>\n"); - printf(" Default time [hh:mm:ss]: 23:59:59.\n"); - ladmin_log("Incomplete parameters to set a ban ('banset' or 'ban' command)." RETCODE); - } - return 136; - } - - return bansetaccountsub(name, date, time); -} - -//------------------------------------------------------------------------ -// Sub-function: Set the final date of a banishment of an account (banset) -//------------------------------------------------------------------------ -int bansetaccount(char* param) { - char name[1023], date[1023], time[1023]; - - memset(name, '\0', sizeof(name)); - memset(date, '\0', sizeof(date)); - memset(time, '\0', sizeof(time)); - - if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void - sscanf(param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void - sscanf(param, "%s %s %[^\r\n]", name, date, time) < 2) { // if date = 0, time can be void - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte, une date et une heure svp.\n"); - printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n"); - printf(" banset <nom_du_compte> 0 (0 = dé-bani)\n"); - printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n"); - printf(" unban/unbanish <nom du compte>\n"); - printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); - ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'banset' ou 'ban')." RETCODE); - } else { - printf("Please input an account name, a date and a hour.\n"); - printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); - printf(" banset <account_name> 0 (0 = un-banished)\n"); - printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name>\n"); - printf(" unban/unbanish <account name>\n"); - printf(" Default time [hh:mm:ss]: 23:59:59.\n"); - ladmin_log("Incomplete parameters to set a ban ('banset' or 'ban' command)." RETCODE); - } - return 136; - } - - if (time[0] == '\0') - strcpy(time, "23:59:59"); - - return bansetaccountsub(name, date, time); -} - -//------------------------------------------------- -// Sub-function: unbanishment of an account (unban) -//------------------------------------------------- -int unbanaccount(char* param) { - char name[1023]; - - memset(name, '\0', sizeof(name)); - - if (strlen(param) == 0 || - (sscanf(param, "\"%[^\"]\"", name) < 1 && - sscanf(param, "'%[^']'", name) < 1 && - sscanf(param, "%[^\r\n]", name) < 1) || - strlen(name) == 0) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte svp.\n"); - printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n"); - printf(" banset <nom_du_compte> 0 (0 = dé-bani)\n"); - printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n"); - printf(" unban/unbanish <nom du compte>\n"); - printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); - ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'unban')." RETCODE); - } else { - printf("Please input an account name.\n"); - printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); - printf(" banset <account_name> 0 (0 = un-banished)\n"); - printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name>\n"); - printf(" unban/unbanish <account name>\n"); - printf(" Default time [hh:mm:ss]: 23:59:59.\n"); - ladmin_log("Incomplete parameters to set a ban ('unban' command)." RETCODE); - } - return 136; - } - - return bansetaccountsub(name, "0", ""); -} - -//--------------------------------------------------------- -// Sub-function: Asking to check the validity of a password -// (Note: never send back a password with login-server!! security of passwords) -//--------------------------------------------------------- -int checkaccount(char* param) { - char name[1023], password[1023]; - - memset(name, '\0', sizeof(name)); - memset(password, '\0', sizeof(password)); - - if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 && // password can be void - sscanf(param, "'%[^']' %[^\r\n]", name, password) < 1 && // password can be void - sscanf(param, "%s %[^\r\n]", name, password) < 1) { // password can be void - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte svp.\n"); - printf("<exemple> check testname motdepasse\n"); - ladmin_log("Nombre incorrect de paramètres pour tester le mot d'un passe d'un compte (commande 'check')." RETCODE); - } else { - printf("Please input an account name.\n"); - printf("<example> check testname password\n"); - ladmin_log("Incomplete parameters to check the password of an account ('check' command)." RETCODE); - } - return 136; - } - - if (verify_accountname(name) == 0) { - return 102; - } - - if (strlen(password) == 0) { - if (typepasswd(password) == 0) - return 134; - } - if (verify_password(password) == 0) - return 131; - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour test un mot de passe." RETCODE); - } else { - ladmin_log("Request to login-server to check a password." RETCODE); - } - - WFIFOW(login_fd,0) = 0x793a; - memcpy(WFIFOP(login_fd,2), name, 24); - memcpy(WFIFOP(login_fd,26), password, 24); - WFIFOSET(login_fd,50); - bytes_to_read = 1; - - return 0; -} - -//------------------------------------------------ -// Sub-function: Asking for deletion of an account -//------------------------------------------------ -int delaccount(char* param) { - char name[1023]; - char letter; - char confirm[1023]; - int i; - - memset(name, '\0', sizeof(name)); - - if (strlen(param) == 0 || - (sscanf(param, "\"%[^\"]\"", name) < 1 && - sscanf(param, "'%[^']'", name) < 1 && - sscanf(param, "%[^\r\n]", name) < 1) || - strlen(name) == 0) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte svp.\n"); - printf("<exemple> del nomtestasupprimer\n"); - ladmin_log("Aucun nom donné pour supprimer un compte (commande 'delete')." RETCODE); - } else { - printf("Please input an account name.\n"); - printf("<example> del testnametodelete\n"); - ladmin_log("No name given to delete an account ('delete' command)." RETCODE); - } - return 136; - } - - if (verify_accountname(name) == 0) { - return 102; - } - - memset(confirm, '\0', sizeof(confirm)); - while ((confirm[0] != 'o' || defaultlanguage != 'F') && confirm[0] != 'n' && (confirm[0] != 'y' || defaultlanguage == 'F')) { - if (defaultlanguage == 'F') - printf("\033[1;36m ** Etes-vous vraiment sûr de vouloir SUPPRIMER le compte [$userid]? (o/n) > \033[0m"); - else - printf("\033[1;36m ** Are you really sure to DELETE account [$userid]? (y/n) > \033[0m"); - fflush(stdout); - memset(confirm, '\0', sizeof(confirm)); - i = 0; - while ((letter = getchar()) != '\n') - confirm[i++] = letter; - } - - if (confirm[0] == 'n') { - if (defaultlanguage == 'F') { - printf("Suppression annulée.\n"); - ladmin_log("Suppression annulée par l'utilisateur (commande 'delete')." RETCODE); - } else { - printf("Deletion canceled.\n"); - ladmin_log("Deletion canceled by user ('delete' command)." RETCODE); - } - return 121; - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour détruire un compte." RETCODE); - } else { - ladmin_log("Request to login-server to delete an acount." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7932; - memcpy(WFIFOP(login_fd,2), name, 24); - WFIFOSET(login_fd,26); - bytes_to_read = 1; - - return 0; -} - -//---------------------------------------------------------- -// Sub-function: Asking to modification of an account e-mail -//---------------------------------------------------------- -int changeemail(char* param) { - char name[1023], email[1023]; - - memset(name, '\0', sizeof(name)); - memset(email, '\0', sizeof(email)); - - if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, email) < 2 && - sscanf(param, "'%[^']' %[^\r\n]", name, email) < 2 && - sscanf(param, "%s %[^\r\n]", name, email) < 2) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte et une email svp.\n"); - printf("<exemple> email testname nouveauemail\n"); - ladmin_log("Nombre incorrect de paramètres pour changer l'email d'un compte (commande 'email')." RETCODE); - } else { - printf("Please input an account name and an email.\n"); - printf("<example> email testname newemail\n"); - ladmin_log("Incomplete parameters to change the email of an account ('email' command)." RETCODE); - } - return 136; - } - - if (verify_accountname(name) == 0) { - return 102; - } - - if (strlen(email) < 3) { - if (defaultlanguage == 'F') { - printf("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email); - ladmin_log("Email trop courte [%s]. Entrez une e-mail valide svp." RETCODE, email); - } else { - printf("Email is too short [%s]. Please input a valid e-mail.\n", email); - ladmin_log("Email is too short [%s]. Please input a valid e-mail." RETCODE, email); - } - return 109; - } - if (strlen(email) > 39) { - if (defaultlanguage == 'F') { - printf("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n", email); - ladmin_log("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp." RETCODE, email); - } else { - printf("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email); - ladmin_log("Email is too long [%s]. Please input an e-mail with 39 bytes at the most." RETCODE, email); - } - return 109; - } - if (e_mail_check(email) == 0) { - if (defaultlanguage == 'F') { - printf("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email); - ladmin_log("Email incorrecte [%s]. Entrez une e-mail valide svp." RETCODE, email); - } else { - printf("Invalid email [%s]. Please input a valid e-mail.\n", email); - ladmin_log("Invalid email [%s]. Please input a valid e-mail." RETCODE, email); - } - return 109; - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour changer une email." RETCODE); - } else { - ladmin_log("Request to login-server to change an email." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7940; - memcpy(WFIFOP(login_fd,2), name, 24); - memcpy(WFIFOP(login_fd,26), email, 40); - WFIFOSET(login_fd,66); - bytes_to_read = 1; - - return 0; -} - -//----------------------------------------------------- -// Sub-function: Asking of the number of online players -//----------------------------------------------------- -int getlogincount() { - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le nombre de joueurs en jeu." RETCODE); - } else { - ladmin_log("Request to login-server to obtain the # of online players." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7938; - WFIFOSET(login_fd,2); - bytes_to_read = 1; - - return 0; -} - -//---------------------------------------------------------- -// Sub-function: Asking to modify the GM level of an account -//---------------------------------------------------------- -int changegmlevel(char* param) { - char name[1023]; - int GM_level; - - memset(name, '\0', sizeof(name)); - GM_level = 0; - - if (sscanf(param, "\"%[^\"]\" %d", name, &GM_level) < 1 && - sscanf(param, "'%[^']' %d", name, &GM_level) < 1 && - sscanf(param, "%s %d", name, &GM_level) < 1) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte et un niveau de GM svp.\n"); - printf("<exemple> gm nomtest 80\n"); - ladmin_log("Nombre incorrect de paramètres pour changer le Niveau de GM d'un compte (commande 'gm')." RETCODE); - } else { - printf("Please input an account name and a GM level.\n"); - printf("<example> gm testname 80\n"); - ladmin_log("Incomplete parameters to change the GM level of an account ('gm' command)." RETCODE); - } - return 136; - } - - if (verify_accountname(name) == 0) { - return 102; - } - - if (GM_level < 0 || GM_level > 99) { - if (defaultlanguage == 'F') { - printf("Niveau de GM incorrect [%d]. Entrez une valeur de 0 à 99 svp.\n", GM_level); - ladmin_log("Niveau de GM incorrect [%d]. La valeur peut être de 0 à 99." RETCODE, GM_level); - } else { - printf("Illegal GM level [%d]. Please input a value from 0 to 99.\n", GM_level); - ladmin_log("Illegal GM level [%d]. The value can be from 0 to 99." RETCODE, GM_level); - } - return 103; - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour changer un niveau de GM." RETCODE); - } else { - ladmin_log("Request to login-server to change a GM level." RETCODE); - } - - WFIFOW(login_fd,0) = 0x793e; - memcpy(WFIFOP(login_fd,2), name, 24); - WFIFOB(login_fd,26) = GM_level; - WFIFOSET(login_fd,27); - bytes_to_read = 1; - - return 0; -} - -//--------------------------------------------- -// Sub-function: Asking to obtain an account id -//--------------------------------------------- -int idaccount(char* param) { - char name[1023]; - - memset(name, '\0', sizeof(name)); - - if (strlen(param) == 0 || - (sscanf(param, "\"%[^\"]\"", name) < 1 && - sscanf(param, "'%[^']'", name) < 1 && - sscanf(param, "%[^\r\n]", name) < 1) || - strlen(name) == 0) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte svp.\n"); - printf("<exemple> id nomtest\n"); - ladmin_log("Aucun nom donné pour rechecher l'id d'un compte (commande 'id')." RETCODE); - } else { - printf("Please input an account name.\n"); - printf("<example> id testname\n"); - ladmin_log("No name given to search an account id ('id' command)." RETCODE); - } - return 136; - } - - if (verify_accountname(name) == 0) { - return 102; - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour connaître l'id d'un compte." RETCODE); - } else { - ladmin_log("Request to login-server to know an account id." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7944; - memcpy(WFIFOP(login_fd,2), name, 24); - WFIFOSET(login_fd,26); - bytes_to_read = 1; - - return 0; -} - -//---------------------------------------------------------------------------- -// Sub-function: Asking to displaying information about an account (by its id) -//---------------------------------------------------------------------------- -int infoaccount(int account_id) { - if (account_id < 0) { - if (defaultlanguage == 'F') { - printf("Entrez un id ayant une valeur positive svp.\n"); - ladmin_log("Une valeur négative a été donné pour trouver le compte." RETCODE); - } else { - printf("Please input a positive value for the id.\n"); - ladmin_log("Negative value was given to found the account." RETCODE); - } - return 136; - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le information d'un compte (par l'id)." RETCODE); - } else { - ladmin_log("Request to login-server to obtain information about an account (by its id)." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7954; - WFIFOL(login_fd,2) = account_id; - WFIFOSET(login_fd,6); - bytes_to_read = 1; - - return 0; -} - -//--------------------------------------- -// Sub-function: Send a broadcast message -//--------------------------------------- -int sendbroadcast(short type, char* message) { - if (strlen(message) == 0) { - if (defaultlanguage == 'F') { - printf("Entrez un message svp.\n"); - if (type == 0) { - printf("<exemple> kami un message\n"); - } else { - printf("<exemple> kamib un message\n"); - } - ladmin_log("Le message est vide (commande 'kami(b)')." RETCODE); - } else { - printf("Please input a message.\n"); - if (type == 0) { - printf("<example> kami a message\n"); - } else { - printf("<example> kamib a message\n"); - } - ladmin_log("The message is void ('kami(b)' command)." RETCODE); - } - return 136; - } - - WFIFOW(login_fd,0) = 0x794e; - WFIFOW(login_fd,2) = type; - WFIFOL(login_fd,4) = strlen(message)+1; - memcpy(WFIFOP(login_fd,8), message, strlen(message)+1); - WFIFOSET(login_fd,8+strlen(message)+1); - bytes_to_read = 1; - - return 0; -} - -//-------------------------------------------- -// Sub-function: Change language of displaying -//-------------------------------------------- -int changelanguage(char* language) { - if (strlen(language) == 0) { - if (defaultlanguage == 'F') { - printf("Entrez une langue svp.\n"); - printf("<exemple> language english\n"); - printf(" language français\n"); - ladmin_log("La langue est vide (commande 'language')." RETCODE); - } else { - printf("Please input a language.\n"); - printf("<example> language english\n"); - printf(" language français\n"); - ladmin_log("The language is void ('language' command)." RETCODE); - } - return 136; - } - - language[0] = toupper(language[0]); - if (language[0] == 'F' || language[0] == 'E') { - defaultlanguage = language[0]; - if (defaultlanguage == 'F') { - printf("Changement de la langue d'affichage en Français.\n"); - ladmin_log("Changement de la langue d'affichage en Français." RETCODE); - } else { - printf("Displaying language changed to English.\n"); - ladmin_log("Displaying language changed to English." RETCODE); - } - } else { - if (defaultlanguage == 'F') { - printf("Langue non paramétrée (langues possibles: 'Français' ou 'English').\n"); - ladmin_log("Langue non paramétrée (Français ou English nécessaire)." RETCODE); - } else { - printf("Undefined language (possible languages: Français or English).\n"); - ladmin_log("Undefined language (must be Français or English)." RETCODE); - } - } - - return 0; -} - -//-------------------------------------------------------- -// Sub-function: Asking to Displaying of the accounts list -//-------------------------------------------------------- -int listaccount(char* param, int type) { -//int list_first, list_last, list_type; // parameter to display a list of accounts - int i; - - list_type = type; - - // set default values - list_first = 0; - list_last = 0; - - if (list_type == 1) { // if listgm - // get all accounts = use default - } else if (list_type == 2) { // if search - for (i = 0; param[i]; i++) - param[i] = tolower(param[i]); - // get all accounts = use default - } else if (list_type == 3) { // if listban - // get all accounts = use default - } else if (list_type == 4) { // if listok - // get all accounts = use default - } else { // if list (list_type == 0) - switch(sscanf(param, "%d %d", &list_first, &list_last)) { - case 0: - // get all accounts = use default - break; - case 1: - list_last = 0; - // use tests of the following value - default: - if (list_first < 0) - list_first = 0; - if (list_last < list_first || list_last < 0) - list_last = 0; - break; - } - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour obtenir la liste des comptes de %d à %d." RETCODE, list_first, list_last); - } else { - ladmin_log("Request to login-server to obtain the list of accounts from %d to %d." RETCODE, list_first, list_last); - } - - WFIFOW(login_fd,0) = 0x7920; - WFIFOL(login_fd,2) = list_first; - WFIFOL(login_fd,6) = list_last; - WFIFOSET(login_fd,10); - bytes_to_read = 1; - - // 0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567 - if (defaultlanguage == 'F') { - printf(" id_compte GM nom_utilisateur sexe count statut\n"); - } else { - printf("account_id GM user_name sex count state\n"); - } - printf("-------------------------------------------------------------------------------\n"); - list_count = 0; - - return 0; -} - -//-------------------------------------------- -// Sub-function: Asking to modify a memo field -//-------------------------------------------- -int changememo(char* param) { - char name[1023], memo[1023]; - - memset(name, '\0', sizeof(name)); - memset(memo, '\0', sizeof(memo)); - - if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, memo) < 1 && // memo can be void - sscanf(param, "'%[^']' %[^\r\n]", name, memo) < 1 && // memo can be void - sscanf(param, "%s %[^\r\n]", name, memo) < 1) { // memo can be void - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte et un mémo svp.\n"); - printf("<exemple> memo nomtest nouveau memo\n"); - ladmin_log("Nombre incorrect de paramètres pour changer le mémo d'un compte (commande 'email')." RETCODE); - } else { - printf("Please input an account name and a memo.\n"); - printf("<example> memo testname new memo\n"); - ladmin_log("Incomplete parameters to change the memo of an account ('email' command)." RETCODE); - } - return 136; - } - - if (verify_accountname(name) == 0) { - return 102; - } - - if (strlen(memo) > 254) { - if (defaultlanguage == 'F') { - printf("Mémo trop long (%d caractères).\n", strlen(memo)); - printf("Entrez un mémo de 254 caractères maximum svp.\n"); - ladmin_log("Mémo trop long (%d caractères). Entrez un mémo de 254 caractères maximum svp." RETCODE, strlen(memo)); - } else { - printf("Memo is too long (%d characters).\n", strlen(memo)); - printf("Please input a memo of 254 bytes at the maximum.\n"); - ladmin_log("Email is too long (%d characters). Please input a memo of 254 bytes at the maximum." RETCODE, strlen(memo)); - } - return 102; - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour changer un mémo." RETCODE); - } else { - ladmin_log("Request to login-server to change a memo." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7942; - memcpy(WFIFOP(login_fd,2), name, 24); - WFIFOW(login_fd,26) = strlen(memo); - if (strlen(memo) > 0) - memcpy(WFIFOP(login_fd,28), memo, strlen(memo)); - WFIFOSET(login_fd,28+strlen(memo)); - bytes_to_read = 1; - - return 0; -} - -//----------------------------------------------- -// Sub-function: Asking to obtain an account name -//----------------------------------------------- -int nameaccount(int id) { - if (id < 0) { - if (defaultlanguage == 'F') { - printf("Entrez un id ayant une valeur positive svp.\n"); - ladmin_log("Id négatif donné pour rechecher le nom d'un compte (commande 'name')." RETCODE); - } else { - printf("Please input a positive value for the id.\n"); - ladmin_log("Negativ id given to search an account name ('name' command)." RETCODE); - } - return 136; - } - - if (defaultlanguage == 'F') - ladmin_log("Envoi d'un requête au serveur de logins pour connaître le nom d'un compte." RETCODE); - else - ladmin_log("Request to login-server to know an account name." RETCODE); - - WFIFOW(login_fd,0) = 0x7946; - WFIFOL(login_fd,2) = id; - WFIFOSET(login_fd,6); - bytes_to_read = 1; - - return 0; -} - -//------------------------------------------ -// Sub-function: Asking to modify a password -// (Note: never send back a password with login-server!! security of passwords) -//------------------------------------------ -int changepasswd(char* param) { - char name[1023], password[1023]; - - memset(name, '\0', sizeof(name)); - memset(password, '\0', sizeof(password)); - - if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 && - sscanf(param, "'%[^']' %[^\r\n]", name, password) < 1 && - sscanf(param, "%s %[^\r\n]", name, password) < 1) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte svp.\n"); - printf("<exemple> passwd nomtest nouveaumotdepasse\n"); - ladmin_log("Nombre incorrect de paramètres pour changer le mot d'un passe d'un compte (commande 'password')." RETCODE); - } else { - printf("Please input an account name.\n"); - printf("<example> passwd testname newpassword\n"); - ladmin_log("Incomplete parameters to change the password of an account ('password' command)." RETCODE); - } - return 136; - } - - if (verify_accountname(name) == 0) { - return 102; - } - - if (strlen(password) == 0) { - if (typepasswd(password) == 0) - return 134; - } - if (verify_password(password) == 0) - return 131; - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour changer un mot de passe." RETCODE); - } else { - ladmin_log("Request to login-server to change a password." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7934; - memcpy(WFIFOP(login_fd,2), name, 24); - memcpy(WFIFOP(login_fd,26), password, 24); - WFIFOSET(login_fd,50); - bytes_to_read = 1; - - return 0; -} - -//---------------------------------------------------------------------- -// Sub-function: Request to login-server to reload GM configuration file -// this function have no answer -//---------------------------------------------------------------------- -int reloadGM() { - WFIFOW(login_fd,0) = 0x7955; - WFIFOSET(login_fd,2); - bytes_to_read = 0; - - if (defaultlanguage == 'F') { - ladmin_log("Demande de recharger le fichier de configuration des GM envoyée." RETCODE); - printf("Demande de recharger le fichier de configuration des GM envoyée.\n"); - printf("Vérifiez les comptes GM actuels (après rechargement):\n"); - } else { - ladmin_log("Request to reload the GM configuration file sended." RETCODE); - printf("Request to reload the GM configuration file sended.\n"); - printf("Check the actual GM accounts (after reloading):\n"); - } - listaccount(parameters, 1); // 1: to list only GM - - return 180; -} - -//----------------------------------------------------- -// Sub-function: Asking to modify the sex of an account -//----------------------------------------------------- -int changesex(char* param) { - char name[1023], sex[1023]; - - memset(name, '\0', sizeof(name)); - memset(sex, '\0', sizeof(sex)); - - if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, sex) < 2 && - sscanf(param, "'%[^']' %[^\r\n]", name, sex) < 2 && - sscanf(param, "%s %[^\r\n]", name, sex) < 2) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte et un sexe svp.\n"); - printf("<exemple> sex nomtest Male\n"); - ladmin_log("Nombre incorrect de paramètres pour changer le sexe d'un compte (commande 'sex')." RETCODE); - } else { - printf("Please input an account name and a sex.\n"); - printf("<example> sex testname Male\n"); - ladmin_log("Incomplete parameters to change the sex of an account ('sex' command)." RETCODE); - } - return 136; - } - - if (verify_accountname(name) == 0) { - return 102; - } - - sex[0] = toupper(sex[0]); - if (strchr("MF", sex[0]) == NULL) { - if (defaultlanguage == 'F') { - printf("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex); - ladmin_log("Sexe incorrect [%s]. Entrez M ou F svp." RETCODE, sex); - } else { - printf("Illegal gender [%s]. Please input M or F.\n", sex); - ladmin_log("Illegal gender [%s]. Please input M or F." RETCODE, sex); - } - return 103; - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour changer un sexe." RETCODE); - } else { - ladmin_log("Request to login-server to change a sex." RETCODE); - } - - WFIFOW(login_fd,0) = 0x793c; - memcpy(WFIFOP(login_fd,2), name, 24); - WFIFOB(login_fd,26) = sex[0]; - WFIFOSET(login_fd,27); - bytes_to_read = 1; - - return 0; -} - -//------------------------------------------------------------------------- -// Sub-function of sub-function changestate, blockaccount or unblockaccount -// Asking to modify the state of an account -//------------------------------------------------------------------------- -int changestatesub(char* name, int state, char* error_message7) { - char error_message[1023]; // need to use, because we can modify error_message7 - - memset(error_message, '\0', sizeof(error_message)); - strncpy(error_message, error_message7, sizeof(error_message)-1); - - if ((state < 0 || state > 9) && state != 100) { // Valid values: 0: ok, or value of the 0x006a packet + 1 - if (defaultlanguage == 'F') { - printf("Entrez une des statuts suivantes svp:\n"); - printf(" 0 = Compte ok 6 = Your Game's EXE file is not the latest version\n"); - } else { - printf("Please input one of these states:\n"); - printf(" 0 = Account ok 6 = Your Game's EXE file is not the latest version\n"); - } - printf(" 1 = Unregistered ID 7 = You are Prohibited to log in until + message\n"); - printf(" 2 = Incorrect Password 8 = Server is jammed due to over populated\n"); - printf(" 3 = This ID is expired 9 = No MSG\n"); - printf(" 4 = Rejected from Server 100 = This ID has been totally erased\n"); - printf(" 5 = You have been blocked by the GM Team\n"); - if (defaultlanguage == 'F') { - printf("<exemples> state nomtest 5\n"); - printf(" state nomtest 7 fin de votre ban\n"); - printf(" block <nom compte>\n"); - printf(" unblock <nom compte>\n"); - ladmin_log("Valeur incorrecte pour le statut d'un compte (commande 'state', 'block' ou 'unblock')." RETCODE); - } else { - printf("<examples> state testname 5\n"); - printf(" state testname 7 end of your ban\n"); - printf(" block <account name>\n"); - printf(" unblock <account name>\n"); - ladmin_log("Invalid value for the state of an account ('state', 'block' or 'unblock' command)." RETCODE); - } - return 151; - } - - if (verify_accountname(name) == 0) { - return 102; - } - - if (state != 7) { - strcpy(error_message, "-"); - } else { - if (strlen(error_message) < 1) { - if (defaultlanguage == 'F') { - printf("Message d'erreur trop court. Entrez un message de 1-19 caractères.\n"); - ladmin_log("Message d'erreur trop court. Entrez un message de 1-19 caractères." RETCODE); - } else { - printf("Error message is too short. Please input a message of 1-19 bytes.\n"); - ladmin_log("Error message is too short. Please input a message of 1-19 bytes." RETCODE); - } - return 102; - } - if (strlen(error_message) > 19) { - if (defaultlanguage == 'F') { - printf("Message d'erreur trop long. Entrez un message de 1-19 caractères.\n"); - ladmin_log("Message d'erreur trop long. Entrez un message de 1-19 caractères." RETCODE); - } else { - printf("Error message is too long. Please input a message of 1-19 bytes.\n"); - ladmin_log("Error message is too long. Please input a message of 1-19 bytes." RETCODE); - } - return 102; - } - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour changer un statut." RETCODE); - } else { - ladmin_log("Request to login-server to change a state." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7936; - memcpy(WFIFOP(login_fd,2), name, 24); - WFIFOL(login_fd,26) = state; - memcpy(WFIFOP(login_fd,30), error_message, 20); - WFIFOSET(login_fd,50); - bytes_to_read = 1; - - return 0; -} - -//------------------------------------------------------- -// Sub-function: Asking to modify the state of an account -//------------------------------------------------------- -int changestate(char* param) { - char name[1023], error_message[1023]; - int state; - - memset(name, '\0', sizeof(name)); - memset(error_message, '\0', sizeof(error_message)); - - if (sscanf(param, "\"%[^\"]\" %d %[^\r\n]", name, &state, error_message) < 2 && - sscanf(param, "'%[^']' %d %[^\r\n]", name, &state, error_message) < 2 && - sscanf(param, "%s %d %[^\r\n]", name, &state, error_message) < 2) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte et un statut svp.\n"); - printf("<exemples> state nomtest 5\n"); - printf(" state nomtest 7 fin de votre ban\n"); - printf(" block <nom compte>\n"); - printf(" unblock <nom compte>\n"); - ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'state')." RETCODE); - } else { - printf("Please input an account name and a state.\n"); - printf("<examples> state testname 5\n"); - printf(" state testname 7 end of your ban\n"); - printf(" block <account name>\n"); - printf(" unblock <account name>\n"); - ladmin_log("Incomplete parameters to change the state of an account ('state' command)." RETCODE); - } - return 136; - } - - return changestatesub(name, state, error_message); -} - -//------------------------------------------- -// Sub-function: Asking to unblock an account -//------------------------------------------- -int unblockaccount(char* param) { - char name[1023]; - - memset(name, '\0', sizeof(name)); - - if (strlen(param) == 0 || - (sscanf(param, "\"%[^\"]\"", name) < 1 && - sscanf(param, "'%[^']'", name) < 1 && - sscanf(param, "%[^\r\n]", name) < 1) || - strlen(name) == 0) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte svp.\n"); - printf("<exemples> state nomtest 5\n"); - printf(" state nomtest 7 fin de votre ban\n"); - printf(" block <nom compte>\n"); - printf(" unblock <nom compte>\n"); - ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'unblock')." RETCODE); - } else { - printf("Please input an account name.\n"); - printf("<examples> state testname 5\n"); - printf(" state testname 7 end of your ban\n"); - printf(" block <account name>\n"); - printf(" unblock <account name>\n"); - ladmin_log("Incomplete parameters to change the state of an account ('unblock' command)." RETCODE); - } - return 136; - } - - return changestatesub(name, 0, "-"); // state 0, no error message -} - -//------------------------------------------- -// Sub-function: Asking to unblock an account -//------------------------------------------- -int blockaccount(char* param) { - char name[1023]; - - memset(name, '\0', sizeof(name)); - - if (strlen(param) == 0 || - (sscanf(param, "\"%[^\"]\"", name) < 1 && - sscanf(param, "'%[^']'", name) < 1 && - sscanf(param, "%[^\r\n]", name) < 1) || - strlen(name) == 0) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte svp.\n"); - printf("<exemples> state nomtest 5\n"); - printf(" state nomtest 7 fin de votre ban\n"); - printf(" block <nom compte>\n"); - printf(" unblock <nom compte>\n"); - ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'block')." RETCODE); - } else { - printf("Please input an account name.\n"); - printf("<examples> state testname 5\n"); - printf(" state testname 7 end of your ban\n"); - printf(" block <account name>\n"); - printf(" unblock <account name>\n"); - ladmin_log("Incomplete parameters to change the state of an account ('block' command)." RETCODE); - } - return 136; - } - - return changestatesub(name, 5, "-"); // state 5, no error message -} - -//--------------------------------------------------------------------- -// Sub-function: Add/substract time to the validity limit of an account -//--------------------------------------------------------------------- -int timeaddaccount(char* param) { - char name[1023], modif[1023]; - int year, month, day, hour, minute, second; - char * p_modif; - int value, i; - - memset(name, '\0', sizeof(name)); - memset(modif, '\0', sizeof(modif)); - year = month = day = hour = minute = second = 0; - - if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 && - sscanf(param, "'%[^']' %[^\r\n]", name, modif) < 2 && - sscanf(param, "%s %[^\r\n]", name, modif) < 2) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte et un modificateur svp.\n"); - printf(" <exemple> timeadd nomtest +1m-2mn1s-6y\n"); - printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); - printf(" et 6 ans dans le même temps.\n"); - ladmin_log("Nombre incorrect de paramètres pour modifier une date limite d'utilisation (commande 'timeadd')." RETCODE); - } else { - printf("Please input an account name and a modifier.\n"); - printf(" <example>: timeadd testname +1m-2mn1s-6y\n"); - printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); - printf(" and 6 years at the same time.\n"); - ladmin_log("Incomplete parameters to modify a limit time ('timeadd' command)." RETCODE); - } - return 136; - } - if (verify_accountname(name) == 0) { - return 102; - } - - // lowercase for modif - for (i = 0; modif[i]; i++) - modif[i] = tolower(modif[i]); - p_modif = modif; - while (strlen(p_modif) > 0) { - value = atoi(p_modif); - if (value == 0) { - p_modif++; - } else { - if (p_modif[0] == '-' || p_modif[0] == '+') - p_modif++; - while (strlen(p_modif) > 0 && p_modif[0] >= '0' && p_modif[0] <= '9') { - p_modif++; - } - if (p_modif[0] == 's') { - second = value; - p_modif++; - } else if (p_modif[0] == 'm' && p_modif[1] == 'n') { - minute = value; - p_modif += 2; - } else if (p_modif[0] == 'h') { - hour = value; - p_modif++; - } else if (p_modif[0] == 'd' || p_modif[0] == 'j') { - day = value; - p_modif += 2; - } else if (p_modif[0] == 'm') { - month = value; - p_modif++; - } else if (p_modif[0] == 'y' || p_modif[0] == 'a') { - year = value; - p_modif++; - } else { - p_modif++; - } - } - } - - if (defaultlanguage == 'F') { - printf(" année: %d\n", year); - printf(" mois: %d\n", month); - printf(" jour: %d\n", day); - printf(" heure: %d\n", hour); - printf(" minute: %d\n", minute); - printf(" seconde: %d\n", second); - } else { - printf(" year: %d\n", year); - printf(" month: %d\n", month); - printf(" day: %d\n", day); - printf(" hour: %d\n", hour); - printf(" minute: %d\n", minute); - printf(" second: %d\n", second); - } - - if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0 && second == 0) { - if (defaultlanguage == 'F') { - printf("Vous devez entrer un ajustement avec cette commande, svp:\n"); - printf(" Valeur d'ajustement (-1, 1, +1, etc...)\n"); - printf(" Elément modifié:\n"); - printf(" a ou y: année\n"); - printf(" m: mois\n"); - printf(" j ou d: jour\n"); - printf(" h: heure\n"); - printf(" mn: minute\n"); - printf(" s: seconde\n"); - printf(" <exemple> timeadd nomtest +1m-2mn1s-6y\n"); - printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); - printf(" et 6 ans dans le même temps.\n"); - ladmin_log("Aucun ajustement n'est pas un ajustement (commande 'timeadd')." RETCODE); - } else { - printf("Please give an adjustment with this command:\n"); - printf(" Adjustment value (-1, 1, +1, etc...)\n"); - printf(" Modified element:\n"); - printf(" a or y: year\n"); - printf(" m: month\n"); - printf(" j or d: day\n"); - printf(" h: hour\n"); - printf(" mn: minute\n"); - printf(" s: second\n"); - printf(" <example> timeadd testname +1m-2mn1s-6y\n"); - printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); - printf(" and 6 years at the same time.\n"); - ladmin_log("No adjustment isn't an adjustment ('timeadd' command)." RETCODE); - } - return 137; - } - if (year > 127 || year < -127) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement d'années correct (de -127 à 127), svp.\n"); - ladmin_log("Ajustement de l'année hors norme ('timeadd' command)." RETCODE); - } else { - printf("Please give a correct adjustment for the years (from -127 to 127).\n"); - ladmin_log("Abnormal adjustement for the year ('timeadd' command)." RETCODE); - } - return 137; - } - if (month > 255 || month < -255) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement de mois correct (de -255 à 255), svp.\n"); - ladmin_log("Ajustement du mois hors norme ('timeadd' command)." RETCODE); - } else { - printf("Please give a correct adjustment for the months (from -255 to 255).\n"); - ladmin_log("Abnormal adjustement for the month ('timeadd' command)." RETCODE); - } - return 137; - } - if (day > 32767 || day < -32767) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n"); - ladmin_log("Ajustement des jours hors norme ('timeadd' command)." RETCODE); - } else { - printf("Please give a correct adjustment for the days (from -32767 to 32767).\n"); - ladmin_log("Abnormal adjustement for the days ('timeadd' command)." RETCODE); - } - return 137; - } - if (hour > 32767 || hour < -32767) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n"); - ladmin_log("Ajustement des heures hors norme ('timeadd' command)." RETCODE); - } else { - printf("Please give a correct adjustment for the hours (from -32767 to 32767).\n"); - ladmin_log("Abnormal adjustement for the hours ('timeadd' command)." RETCODE); - } - return 137; - } - if (minute > 32767 || minute < -32767) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n"); - ladmin_log("Ajustement des minutes hors norme ('timeadd' command)." RETCODE); - } else { - printf("Please give a correct adjustment for the minutes (from -32767 to 32767).\n"); - ladmin_log("Abnormal adjustement for the minutes ('timeadd' command)." RETCODE); - } - return 137; - } - if (second > 32767 || second < -32767) { - if (defaultlanguage == 'F') { - printf("Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n"); - ladmin_log("Ajustement des secondes hors norme ('timeadd' command)." RETCODE); - } else { - printf("Please give a correct adjustment for the seconds (from -32767 to 32767).\n"); - ladmin_log("Abnormal adjustement for the seconds ('timeadd' command)." RETCODE); - } - return 137; - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour modifier une date limite d'utilisation." RETCODE); - } else { - ladmin_log("Request to login-server to modify a time limit." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7950; - memcpy(WFIFOP(login_fd,2), name, 24); - WFIFOW(login_fd,26) = (short)year; - WFIFOW(login_fd,28) = (short)month; - WFIFOW(login_fd,30) = (short)day; - WFIFOW(login_fd,32) = (short)hour; - WFIFOW(login_fd,34) = (short)minute; - WFIFOW(login_fd,36) = (short)second; - WFIFOSET(login_fd,38); - bytes_to_read = 1; - - return 0; -} - -//------------------------------------------------- -// Sub-function: Set a validity limit of an account -//------------------------------------------------- -int timesetaccount(char* param) { - char name[1023], date[1023], time[1023]; - int year, month, day, hour, minute, second; - time_t connect_until_time; // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited) - struct tm *tmtime; - - memset(name, '\0', sizeof(name)); - memset(date, '\0', sizeof(date)); - memset(time, '\0', sizeof(time)); - year = month = day = hour = minute = second = 0; - connect_until_time = 0; - tmtime = localtime(&connect_until_time); // initialize - - if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void - sscanf(param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void - sscanf(param, "%s %s %[^\r\n]", name, date, time) < 2) { // if date = 0, time can be void - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte, une date et une heure svp.\n"); - printf("<exemple>: timeset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n"); - printf(" timeset <nom_du_compte> 0 (0 = illimité)\n"); - printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); - ladmin_log("Nombre incorrect de paramètres pour fixer une date limite d'utilisation (commande 'timeset')." RETCODE); - } else { - printf("Please input an account name, a date and a hour.\n"); - printf("<example>: timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); - printf(" timeset <account_name> 0 (0 = unlimited)\n"); - printf(" Default time [hh:mm:ss]: 23:59:59.\n"); - ladmin_log("Incomplete parameters to set a limit time ('timeset' command)." RETCODE); - } - return 136; - } - if (verify_accountname(name) == 0) { - return 102; - } - - if (time[0] == '\0') - strcpy(time, "23:59:59"); - - if (atoi(date) != 0 && - ((sscanf(date, "%d/%d/%d", &year, &month, &day) < 3 && - sscanf(date, "%d-%d-%d", &year, &month, &day) < 3 && - sscanf(date, "%d.%d.%d", &year, &month, &day) < 3 && - sscanf(date, "%d'%d'%d", &year, &month, &day) < 3) || - sscanf(time, "%d:%d:%d", &hour, &minute, &second) < 3)) { - if (defaultlanguage == 'F') { - printf("Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n"); - ladmin_log("Format incorrect pour la date/heure ('timeset' command)." RETCODE); - } else { - printf("Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"); - ladmin_log("Invalid format for the date/time ('timeset' command)." RETCODE); - } - return 102; - } - - if (atoi(date) == 0) { - connect_until_time = 0; - } else { - if (year < 70) { - year = year + 100; - } - if (year >= 1900) { - year = year - 1900; - } - if (month < 1 || month > 12) { - if (defaultlanguage == 'F') { - printf("Entrez un mois correct svp (entre 1 et 12).\n"); - ladmin_log("Mois incorrect pour la date ('timeset' command)." RETCODE); - } else { - printf("Please give a correct value for the month (from 1 to 12).\n"); - ladmin_log("Invalid month for the date ('timeset' command)." RETCODE); - } - return 102; - } - month = month - 1; - if (day < 1 || day > 31) { - if (defaultlanguage == 'F') { - printf("Entrez un jour correct svp (entre 1 et 31).\n"); - ladmin_log("Jour incorrect pour la date ('timeset' command)." RETCODE); - } else { - printf("Please give a correct value for the day (from 1 to 31).\n"); - ladmin_log("Invalid day for the date ('timeset' command)." RETCODE); - } - return 102; - } - if (((month == 3 || month == 5 || month == 8 || month == 10) && day > 30) || - (month == 1 && day > 29)) { - if (defaultlanguage == 'F') { - printf("Entrez un jour correct en fonction du mois (%d) svp.\n", month); - ladmin_log("Jour incorrect pour ce mois correspondant ('timeset' command)." RETCODE); - } else { - printf("Please give a correct value for a day of this month (%d).\n", month); - ladmin_log("Invalid day for this month ('timeset' command)." RETCODE); - } - return 102; - } - if (hour < 0 || hour > 23) { - if (defaultlanguage == 'F') { - printf("Entrez une heure correcte svp (entre 0 et 23).\n"); - ladmin_log("Heure incorrecte pour l'heure ('timeset' command)." RETCODE); - } else { - printf("Please give a correct value for the hour (from 0 to 23).\n"); - ladmin_log("Invalid hour for the time ('timeset' command)." RETCODE); - } - return 102; - } - if (minute < 0 || minute > 59) { - if (defaultlanguage == 'F') { - printf("Entrez des minutes correctes svp (entre 0 et 59).\n"); - ladmin_log("Minute incorrecte pour l'heure ('timeset' command)." RETCODE); - } else { - printf("Please give a correct value for the minutes (from 0 to 59).\n"); - ladmin_log("Invalid minute for the time ('timeset' command)." RETCODE); - } - return 102; - } - if (second < 0 || second > 59) { - if (defaultlanguage == 'F') { - printf("Entrez des secondes correctes svp (entre 0 et 59).\n"); - ladmin_log("Seconde incorrecte pour l'heure ('timeset' command)." RETCODE); - } else { - printf("Please give a correct value for the seconds (from 0 to 59).\n"); - ladmin_log("Invalid second for the time ('timeset' command)." RETCODE); - } - return 102; - } - tmtime->tm_year = year; - tmtime->tm_mon = month; - tmtime->tm_mday = day; - tmtime->tm_hour = hour; - tmtime->tm_min = minute; - tmtime->tm_sec = second; - tmtime->tm_isdst = -1; // -1: no winter/summer time modification - connect_until_time = mktime(tmtime); - if (connect_until_time == -1) { - if (defaultlanguage == 'F') { - printf("Date incorrecte.\n"); - printf("Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n"); - ladmin_log("Date incorrecte. ('timeset' command)." RETCODE); - } else { - printf("Invalid date.\n"); - printf("Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"); - ladmin_log("Invalid date. ('timeset' command)." RETCODE); - } - return 102; - } - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour fixer une date limite d'utilisation." RETCODE); - } else { - ladmin_log("Request to login-server to set a time limit." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7948; - memcpy(WFIFOP(login_fd,2), name, 24); - WFIFOL(login_fd,26) = (int)connect_until_time; - WFIFOSET(login_fd,30); - bytes_to_read = 1; - - return 0; -} - -//------------------------------------------------------------------------------ -// Sub-function: Asking to displaying information about an account (by its name) -//------------------------------------------------------------------------------ -int whoaccount(char* param) { - char name[1023]; - - memset(name, '\0', sizeof(name)); - - if (strlen(param) == 0 || - (sscanf(param, "\"%[^\"]\"", name) < 1 && - sscanf(param, "'%[^']'", name) < 1 && - sscanf(param, "%[^\r\n]", name) < 1) || - strlen(name) == 0) { - if (defaultlanguage == 'F') { - printf("Entrez un nom de compte svp.\n"); - printf("<exemple> who nomtest\n"); - ladmin_log("Aucun nom n'a été donné pour trouver le compte." RETCODE); - } else { - printf("Please input an account name.\n"); - printf("<example> who testname\n"); - ladmin_log("No name was given to found the account." RETCODE); - } - return 136; - } - if (verify_accountname(name) == 0) { - return 102; - } - - if (defaultlanguage == 'F') { - ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le information d'un compte (par le nom)." RETCODE); - } else { - ladmin_log("Request to login-server to obtain information about an account (by its name)." RETCODE); - } - - WFIFOW(login_fd,0) = 0x7952; - memcpy(WFIFOP(login_fd,2), name, 24); - WFIFOSET(login_fd,26); - bytes_to_read = 1; - - return 0; -} - -//-------------------------------------------------------- -// Sub-function: Asking of the version of the login-server -//-------------------------------------------------------- -int checkloginversion() { - if (defaultlanguage == 'F') - ladmin_log("Envoi d'un requête au serveur de logins pour obtenir sa version." RETCODE); - else - ladmin_log("Request to login-server to obtain its version." RETCODE); - - WFIFOW(login_fd,0) = 0x7530; - WFIFOSET(login_fd,2); - bytes_to_read = 1; - - return 0; -} - -//--------------------------------------------- -// Prompt function -// this function wait until user type a command -// and analyse the command. -//--------------------------------------------- -int prompt() { - int i, j; - char buf[1024]; - char *p; - - // while we don't wait new packets - while (bytes_to_read == 0) { - // for help with the console colors look here: - // http://www.edoceo.com/liberum/?doc=printf-with-color - // some code explanation (used here): - // \033[2J : clear screen and go up/left (0, 0 position) - // \033[K : clear line from actual position to end of the line - // \033[0m : reset color parameter - // \033[1m : use bold for font - printf("\n"); - if (defaultlanguage == 'F') - printf("\033[32mPour afficher les commandes, tapez 'Entrée'.\033[0m\n"); - else - printf("\033[32mTo list the commands, type 'enter'.\033[0m\n"); - printf("\033[0;36mLadmin-> \033[0m"); - printf("\033[1m"); - fflush(stdout); - - // get command and parameter - memset(buf, '\0', sizeof(buf)); - fflush(stdin); - fgets(buf, 1023, stdin); - buf[1023] = '\0'; - - printf("\033[0m"); - fflush(stdout); - - // remove final \n - if((p = strrchr(buf, '\n')) != NULL) - p[0] = '\0'; - // remove all control char - for (i = 0; buf[i]; i++) - if (buf[i] < 32) { - // remove cursor control. - if (buf[i] == 27 && buf[i+1] == '[' && - (buf[i+2] == 'H' || // home position (cursor) - buf[i+2] == 'J' || // clear screen - buf[i+2] == 'A' || // up 1 line - buf[i+2] == 'B' || // down 1 line - buf[i+2] == 'C' || // right 1 position - buf[i+2] == 'D' || // left 1 position - buf[i+2] == 'G')) { // center cursor (windows) - for (j = i; buf[j]; j++) - buf[j] = buf[j+3]; - } else if (buf[i] == 27 && buf[i+1] == '[' && buf[i+2] == '2' && buf[i+3] == 'J') { // clear screen - for (j = i; buf[j]; j++) - buf[j] = buf[j+4]; - } else if (buf[i] == 27 && buf[i+1] == '[' && buf[i+3] == '~' && - (buf[i+2] == '1' || // home (windows) - buf[i+2] == '2' || // insert (windows) - buf[i+2] == '3' || // del (windows) - buf[i+2] == '4' || // end (windows) - buf[i+2] == '5' || // pgup (windows) - buf[i+2] == '6')) { // pgdown (windows) - for (j = i; buf[j]; j++) - buf[j] = buf[j+4]; - } else { - // remove other control char. - for (j = i; buf[j]; j++) - buf[j] = buf[j+1]; - } - i--; - } - - // extract command name and parameters - memset(command, '\0', sizeof(command)); - memset(parameters, '\0', sizeof(parameters)); - sscanf(buf, "%1023s %[^\n]", command, parameters); - command[1023] = '\0'; - parameters[1023] = '\0'; - - // lowercase for command line - for (i = 0; command[i]; i++) - command[i] = tolower(command[i]); - - if (command[0] == '?' || strlen(command) == 0) { - if (defaultlanguage == 'F') { - strcpy(buf, "aide"); - strcpy(command, "aide"); - } else { - strcpy(buf, "help"); - strcpy(command, "help"); - } - } - - // Analyse of the command - check_command(command); // give complete name to the command - - if (strlen(parameters) == 0) { - if (defaultlanguage == 'F') { - ladmin_log("Commande: '%s' (sans paramètre)" RETCODE, command, parameters); - } else { - ladmin_log("Command: '%s' (without parameters)" RETCODE, command, parameters); - } - } else { - if (defaultlanguage == 'F') { - ladmin_log("Commande: '%s', paramètres: '%s'" RETCODE, command, parameters); - } else { - ladmin_log("Command: '%s', parameters: '%s'" RETCODE, command, parameters); - } - } - - // Analyse of the command -// help - if (strcmp(command, "aide") == 0) { - display_help(parameters, 1); // 1: french - } else if (strcmp(command, "help") == 0 ) { - display_help(parameters, 0); // 0: english -// general commands - } else if (strcmp(command, "add") == 0) { - addaccount(parameters, 0); // 0: no email - } else if (strcmp(command, "ban") == 0) { - banaccount(parameters); - } else if (strcmp(command, "banadd") == 0) { - banaddaccount(parameters); - } else if (strcmp(command, "banset") == 0) { - bansetaccount(parameters); - } else if (strcmp(command, "block") == 0) { - blockaccount(parameters); - } else if (strcmp(command, "check") == 0) { - checkaccount(parameters); - } else if (strcmp(command, "create") == 0) { - addaccount(parameters, 1); // 1: with email - } else if (strcmp(command, "delete") == 0) { - delaccount(parameters); - } else if (strcmp(command, "email") == 0) { - changeemail(parameters); - } else if (strcmp(command, "getcount") == 0) { - getlogincount(); - } else if (strcmp(command, "gm") == 0) { - changegmlevel(parameters); - } else if (strcmp(command, "id") == 0) { - idaccount(parameters); - } else if (strcmp(command, "info") == 0) { - infoaccount(atoi(parameters)); - } else if (strcmp(command, "kami") == 0) { - sendbroadcast(0, parameters); // flag for normal - } else if (strcmp(command, "kamib") == 0) { - sendbroadcast(0x10, parameters); // flag for blue - } else if (strcmp(command, "language") == 0) { - changelanguage(parameters); - } else if (strcmp(command, "list") == 0) { - listaccount(parameters, 0); // 0: to list all - } else if (strcmp(command, "listban") == 0) { - listaccount(parameters, 3); // 3: to list only accounts with state or bannished - } else if (strcmp(command, "listgm") == 0) { - listaccount(parameters, 1); // 1: to list only GM - } else if (strcmp(command, "listok") == 0) { - listaccount(parameters, 4); // 4: to list only accounts without state and not bannished - } else if (strcmp(command, "memo") == 0) { - changememo(parameters); - } else if (strcmp(command, "name") == 0) { - nameaccount(atoi(parameters)); - } else if (strcmp(command, "password") == 0) { - changepasswd(parameters); - } else if (strcmp(command, "reloadgm") == 0) { - reloadGM(); - } else if (strcmp(command, "search") == 0) { // no regex in C version - listaccount(parameters, 2); // 2: to list with pattern - } else if (strcmp(command, "sex") == 0) { - changesex(parameters); - } else if (strcmp(command, "state") == 0) { - changestate(parameters); - } else if (strcmp(command, "timeadd") == 0) { - timeaddaccount(parameters); - } else if (strcmp(command, "timeset") == 0) { - timesetaccount(parameters); - } else if (strcmp(command, "unban") == 0) { - unbanaccount(parameters); - } else if (strcmp(command, "unblock") == 0) { - unblockaccount(parameters); - } else if (strcmp(command, "version") == 0) { - checkloginversion(); - } else if (strcmp(command, "who") == 0) { - whoaccount(parameters); -// quit - } else if (strcmp(command, "quit") == 0 || - strcmp(command, "exit") == 0 || - strcmp(command, "end") == 0) { - if (defaultlanguage == 'F') { - printf("Au revoir.\n"); - } else { - printf("Bye.\n"); - } - exit(0); -// unknown command - } else { - if (defaultlanguage == 'F') { - printf("Commande inconnue [%s].\n", buf); - ladmin_log("Commande inconnue [%s]." RETCODE, buf); - } else { - printf("Unknown command [%s].\n", buf); - ladmin_log("Unknown command [%s]." RETCODE, buf); - } - } - } - - return 0; -} - -//------------------------------------------------------------- -// Function: Parse receiving informations from the login-server -//------------------------------------------------------------- -int parse_fromlogin(int fd) { - struct char_session_data *sd; - - if (session[fd]->eof) { - if (defaultlanguage == 'F') { - printf("Impossible de se connecter au serveur de login [%s:%d] !\n", loginserverip, loginserverport); - ladmin_log("Impossible de se connecter au serveur de login [%s:%d] !" RETCODE, loginserverip, loginserverport); - } else { - printf("Impossible to have a connection with the login-server [%s:%d] !\n", loginserverip, loginserverport); - ladmin_log("Impossible to have a connection with the login-server [%s:%d] !" RETCODE, loginserverip, loginserverport); - } - close(fd); - delete_session(fd); - exit (0); - } - -// printf("parse_fromlogin : %d %d %d\n", fd, RFIFOREST(fd), RFIFOW(fd,0)); - sd = (struct char_session_data*)session[fd]->session_data; - - while(RFIFOREST(fd) >= 2) { - switch(RFIFOW(fd,0)) { - case 0x7919: // answer of a connection request - if (RFIFOREST(fd) < 3) - return 0; - if (RFIFOB(fd,2) != 0) { - if (defaultlanguage == 'F') { - printf("Erreur de login:\n"); - printf(" - mot de passe incorrect,\n"); - printf(" - système d'administration non activé, ou\n"); - printf(" - IP non autorisée.\n"); - ladmin_log("Erreur de login: mot de passe incorrect, système d'administration non activé, ou IP non autorisée." RETCODE); - } else { - printf("Error at login:\n"); - printf(" - incorrect password,\n"); - printf(" - administration system not activated, or\n"); - printf(" - unauthorised IP.\n"); - ladmin_log("Error at login: incorrect password, administration system not activated, or unauthorised IP." RETCODE); - } - session[fd]->eof = 1; - //bytes_to_read = 1; // not stop at prompt - } else { - if (defaultlanguage == 'F') { - printf("Connexion établie.\n"); - ladmin_log("Connexion établie." RETCODE); - printf("Lecture de la version du serveur de login...\n"); - ladmin_log("Lecture de la version du serveur de login..." RETCODE); - } else { - printf("Established connection.\n"); - ladmin_log("Established connection." RETCODE); - printf("Reading of the version of the login-server...\n"); - ladmin_log("Reading of the version of the login-server..." RETCODE); - } - //bytes_to_read = 1; // unchanged - checkloginversion(); - } - RFIFOSKIP(fd,3); - break; - -#ifdef PASSWORDENC - case 0x01dc: // answer of a coding key request - if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2)) - return 0; - { - char md5str[64] = "", md5bin[32], md5key[RFIFOW(fd,2) - 4 + 1]; - memcpy(md5key, RFIFOP(fd,4), RFIFOW(fd,2) - 4); - md5key[sizeof(md5key)-1] = '0'; - if (passenc == 1) { - strncpy(md5str, (const char*)RFIFOP(fd,4), RFIFOW(fd,2) - 4); - strcat(md5str, loginserveradminpassword); - } else if (passenc == 2) { - strncpy(md5str, loginserveradminpassword, sizeof(loginserveradminpassword)); - strcat(md5str, (const char*)RFIFOP(fd,4)); - } - MD5_String2binary(md5str, md5bin); - WFIFOW(login_fd,0) = 0x7918; // Request for administation login (encrypted password) - WFIFOW(login_fd,2) = passenc; // Encrypted type - memcpy(WFIFOP(login_fd,4), md5bin, 16); - WFIFOSET(login_fd,20); - if (defaultlanguage == 'F') { - printf("Réception de la clef MD5.\n"); - ladmin_log("Réception de la clef MD5." RETCODE); - printf("Envoi du mot de passe crypté...\n"); - ladmin_log("Envoi du mot de passe crypté..." RETCODE); - } else { - printf("Receiving of the MD5 key.\n"); - ladmin_log("Receiving of the MD5 key." RETCODE); - printf("Sending of the encrypted password...\n"); - ladmin_log("Sending of the encrypted password..." RETCODE); - } - } - bytes_to_read = 1; - RFIFOSKIP(fd,RFIFOW(fd,2)); - break; -#endif - - case 0x7531: // Displaying of the version of the login-server - if (RFIFOREST(fd) < 10) - return 0; - printf(" Login-Server [%s:%d]\n", loginserverip, loginserverport); - if (((int)RFIFOB(login_fd,5)) == 0) { - printf(" eAthena version stable-%d.%d", (int)RFIFOB(login_fd,2), (int)RFIFOB(login_fd,3)); - } else { - printf(" eAthena version dev-%d.%d", (int)RFIFOB(login_fd,2), (int)RFIFOB(login_fd,3)); - } - if (((int)RFIFOB(login_fd,4)) == 0) - printf(" revision %d", (int)RFIFOB(login_fd,4)); - if (((int)RFIFOB(login_fd,6)) == 0) - printf("%d.\n", RFIFOW(login_fd,8)); - else - printf("-mod%d.\n", RFIFOW(login_fd,8)); - bytes_to_read = 0; - RFIFOSKIP(fd,10); - break; - - case 0x7921: // Displaying of the list of accounts - if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2)) - return 0; - if (RFIFOW(fd,2) < 5) { - if (defaultlanguage == 'F') { - ladmin_log(" Réception d'une liste des comptes vide." RETCODE); - if (list_count == 0) - printf("Aucun compte trouvé.\n"); - else if (list_count == 1) - printf("1 compte trouvé.\n"); - else - printf("%d comptes trouvés.\n", list_count); - } else { - ladmin_log(" Receiving of a void accounts list." RETCODE); - if (list_count == 0) - printf("No account found.\n"); - else if (list_count == 1) - printf("1 account found.\n"); - else - printf("%d accounts found.\n", list_count); - } - bytes_to_read = 0; - } else { - int i; - if (defaultlanguage == 'F') - ladmin_log(" Réception d'une liste des comptes." RETCODE); - else - ladmin_log(" Receiving of a accounts list." RETCODE); - for(i = 4; i < RFIFOW(fd,2); i += 38) { - int j; - char userid[24]; - char lower_userid[24]; - memcpy(userid, RFIFOP(fd,i + 5), sizeof(userid)); - userid[sizeof(userid)-1] = '\0'; - memset(lower_userid, '\0', sizeof(lower_userid)); - for (j = 0; userid[j]; j++) - lower_userid[j] = tolower(userid[j]); - list_first = RFIFOL(fd,i) + 1; - // here are checks... - if (list_type == 0 || - (list_type == 1 && RFIFOB(fd,i+4) > 0) || - (list_type == 2 && strstr(lower_userid, parameters) != NULL) || - (list_type == 3 && RFIFOL(fd,i+34) != 0) || - (list_type == 4 && RFIFOL(fd,i+34) == 0)) { - printf("%10d ", RFIFOL(fd,i)); - if (RFIFOB(fd,i+4) == 0) - printf(" "); - else - printf("%2d ", (int)RFIFOB(fd,i+4)); - printf("%-24s", userid); - if (defaultlanguage == 'F') { - if (RFIFOB(fd,i+29) == 0) - printf("%-5s ", "Femme"); - else if (RFIFOB(fd,i+29) == 1) - printf("%-5s ", "Male"); - else - printf("%-5s ", "Servr"); - } else { - if (RFIFOB(fd,i+29) == 0) - printf("%-5s ", "Femal"); - else if (RFIFOB(fd,i+29) == 1) - printf("%-5s ", "Male"); - else - printf("%-5s ", "Servr"); - } - printf("%6d ", RFIFOL(fd,i+30)); - switch(RFIFOL(fd,i+34)) { - case 0: - if (defaultlanguage == 'F') - printf("%-27s\n", "Compte Ok"); - else - printf("%-27s\n", "Account OK"); - break; - case 1: - printf("%-27s\n", "Unregistered ID"); - break; - case 2: - printf("%-27s\n", "Incorrect Password"); - break; - case 3: - printf("%-27s\n", "This ID is expired"); - break; - case 4: - printf("%-27s\n", "Rejected from Server"); - break; - case 5: - printf("%-27s\n", "Blocked by the GM Team"); // You have been blocked by the GM Team - break; - case 6: - printf("%-27s\n", "Your EXE file is too old"); // Your Game's EXE file is not the latest version - break; - case 7: - printf("%-27s\n", "Banishement or"); - printf(" Prohibited to login until...\n"); // You are Prohibited to log in until %s - break; - case 8: - printf("%-27s\n", "Server is over populated"); - break; - case 9: - printf("%-27s\n", "No MSG"); - break; - default: // 100 - printf("%-27s\n", "This ID is totally erased"); // This ID has been totally erased - break; - } - list_count++; - } - } - // asking of the following acounts - if (defaultlanguage == 'F') - ladmin_log("Envoi d'un requête au serveur de logins pour obtenir la liste des comptes de %d à %d (complément)." RETCODE, list_first, list_last); - else - ladmin_log("Request to login-server to obtain the list of accounts from %d to %d (complement)." RETCODE, list_first, list_last); - WFIFOW(login_fd,0) = 0x7920; - WFIFOL(login_fd,2) = list_first; - WFIFOL(login_fd,6) = list_last; - WFIFOSET(login_fd,10); - bytes_to_read = 1; - } - RFIFOSKIP(fd,RFIFOW(fd,2)); - break; - - case 0x7931: // Answer of login-server about an account creation - if (RFIFOREST(fd) < 30) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec à la création du compte [%s]. Un compte identique existe déjà.\n", RFIFOP(fd,6)); - ladmin_log("Echec à la création du compte [%s]. Un compte identique existe déjà." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] creation failed. Same account already exists.\n", RFIFOP(fd,6)); - ladmin_log("Account [%s] creation failed. Same account already exists." RETCODE, RFIFOP(fd,6)); - } - } else { - if (defaultlanguage == 'F') { - printf("Compte [%s] créé avec succès [id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Compte [%s] créé avec succès [id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("Account [%s] is successfully created [id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Account [%s] is successfully created [id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,30); - break; - - case 0x7933: // Answer of login-server about an account deletion - if (RFIFOREST(fd) < 30) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec de la suppression du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); - ladmin_log("Echec de la suppression du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] deletion failed. Account doesn't exist.\n", RFIFOP(fd,6)); - ladmin_log("Account [%s] deletion failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); - } - } else { - if (defaultlanguage == 'F') { - printf("Compte [%s][id: %d] SUPPRIME avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Compte [%s][id: %d] SUPPRIME avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("Account [%s][id: %d] is successfully DELETED.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Account [%s][id: %d] is successfully DELETED." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,30); - break; - - case 0x7935: // answer of the change of an account password - if (RFIFOREST(fd) < 30) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec de la modification du mot de passe du compte [%s].\n", RFIFOP(fd,6)); - printf("Le compte [%s] n'existe pas.\n", RFIFOP(fd,6)); - ladmin_log("Echec de la modification du mot de passe du compte. Le compte [%s] n'existe pas." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] password changing failed.\n", RFIFOP(fd,6)); - printf("Account [%s] doesn't exist.\n", RFIFOP(fd,6)); - ladmin_log("Account password changing failed. The compte [%s] doesn't exist." RETCODE, RFIFOP(fd,6)); - } - } else { - if (defaultlanguage == 'F') { - printf("Modification du mot de passe du compte [%s][id: %d] réussie.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Modification du mot de passe du compte [%s][id: %d] réussie." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("Account [%s][id: %d] password successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Account [%s][id: %d] password successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,30); - break; - - case 0x7937: // answer of the change of an account state - if (RFIFOREST(fd) < 34) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec du changement du statut du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); - ladmin_log("Echec du changement du statut du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] state changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); - ladmin_log("Account [%s] state changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); - } - } else { - char tmpstr[256]; - if (defaultlanguage == 'F') { - sprintf(tmpstr, "Statut du compte [%s] changé avec succès en [", RFIFOP(fd,6)); - } else { - sprintf(tmpstr, "Account [%s] state successfully changed in [", RFIFOP(fd,6)); - } - switch(RFIFOL(fd,30)) { - case 0: - if (defaultlanguage == 'F') - strcat(tmpstr, "0: Compte Ok"); - else - strcat(tmpstr, "0: Account OK"); - break; - case 1: - strcat(tmpstr, "1: Unregistered ID"); - break; - case 2: - strcat(tmpstr, "2: Incorrect Password"); - break; - case 3: - strcat(tmpstr, "3: This ID is expired"); - break; - case 4: - strcat(tmpstr, "4: Rejected from Server"); - break; - case 5: - strcat(tmpstr, "5: You have been blocked by the GM Team"); - break; - case 6: - strcat(tmpstr, "6: [Your Game's EXE file is not the latest version"); - break; - case 7: - strcat(tmpstr, "7: You are Prohibited to log in until..."); - break; - case 8: - strcat(tmpstr, "8: Server is jammed due to over populated"); - break; - case 9: - strcat(tmpstr, "9: No MSG"); - break; - default: // 100 - strcat(tmpstr, "100: This ID is totally erased"); - break; - } - strcat(tmpstr, "]"); - printf("%s\n", tmpstr); - ladmin_log("%s%s", tmpstr, RETCODE); - } - bytes_to_read = 0; - RFIFOSKIP(fd,34); - break; - - case 0x7939: // answer of the number of online players - if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2)) - return 0; - { - // Get length of the received packet - int i; - char name[20]; - if (defaultlanguage == 'F') { - ladmin_log(" Réception du nombre de joueurs en ligne." RETCODE); - } else { - ladmin_log(" Receiving of the number of online players." RETCODE); - } - // Read information of the servers - if (RFIFOW(fd,2) < 5) { - if (defaultlanguage == 'F') { - printf(" Aucun serveur n'est connecté au login serveur.\n"); - } else { - printf(" No server is connected to the login-server.\n"); - } - } else { - if (defaultlanguage == 'F') { - printf(" Nombre de joueurs en ligne (serveur: nb):\n"); - } else { - printf(" Number of online players (server: number).\n"); - } - // Displaying of result - for(i = 4; i < RFIFOW(fd,2); i += 32) { - memcpy(name, RFIFOP(fd,i+6), sizeof(name)); - name[sizeof(name) - 1] = '\0'; - printf(" %-20s : %5d\n", name, RFIFOW(fd,i+26)); - } - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,RFIFOW(fd,2)); - break; - - case 0x793b: // answer of the check of a password - if (RFIFOREST(fd) < 30) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Le compte [%s] n'existe pas ou le mot de passe est incorrect.\n", RFIFOP(fd,6)); - ladmin_log("Le compte [%s] n'existe pas ou le mot de passe est incorrect." RETCODE, RFIFOP(fd,6)); - } else { - printf("The account [%s] doesn't exist or the password is incorrect.\n", RFIFOP(fd,6)); - ladmin_log("The account [%s] doesn't exist or the password is incorrect." RETCODE, RFIFOP(fd,6)); - } - } else { - if (defaultlanguage == 'F') { - printf("Le mot de passe donné correspond bien au compte [%s][id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Le mot de passe donné correspond bien au compte [%s][id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("The proposed password is correct for the account [%s][id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("The proposed password is correct for the account [%s][id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,30); - break; - - case 0x793d: // answer of the change of an account sex - if (RFIFOREST(fd) < 30) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec de la modification du sexe du compte [%s].\n", RFIFOP(fd,6)); - printf("Le compte [%s] n'existe pas ou le sexe est déjà celui demandé.\n", RFIFOP(fd,6)); - ladmin_log("Echec de la modification du sexe du compte. Le compte [%s] n'existe pas ou le sexe est déjà celui demandé." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] sex changing failed.\n", RFIFOP(fd,6)); - printf("Account [%s] doesn't exist or the sex is already the good sex.\n", RFIFOP(fd,6)); - ladmin_log("Account sex changing failed. The compte [%s] doesn't exist or the sex is already the good sex." RETCODE, RFIFOP(fd,6)); - } - } else { - if (defaultlanguage == 'F') { - printf("Sexe du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Sexe du compte [%s][id: %d] changé avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("Account [%s][id: %d] sex successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Account [%s][id: %d] sex successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,30); - break; - - case 0x793f: // answer of the change of an account GM level - if (RFIFOREST(fd) < 30) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec de la modification du niveau de GM du compte [%s].\n", RFIFOP(fd,6)); - printf("Le compte [%s] n'existe pas, le niveau de GM est déjà celui demandé\n", RFIFOP(fd,6)); - printf("ou il est impossible de modifier le fichier des comptes GM.\n"); - ladmin_log("Echec de la modification du niveau de GM du compte. Le compte [%s] n'existe pas, le niveau de GM est déjà celui demandé ou il est impossible de modifier le fichier des comptes GM." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] GM level changing failed.\n", RFIFOP(fd,6)); - printf("Account [%s] doesn't exist, the GM level is already the good GM level\n", RFIFOP(fd,6)); - printf("or it's impossible to modify the GM accounts file.\n"); - ladmin_log("Account GM level changing failed. The compte [%s] doesn't exist, the GM level is already the good sex or it's impossible to modify the GM accounts file." RETCODE, RFIFOP(fd,6)); - } - } else { - if (defaultlanguage == 'F') { - printf("Niveau de GM du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Niveau de GM du compte [%s][id: %d] changé avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("Account [%s][id: %d] GM level successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Account [%s][id: %d] GM level successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,30); - break; - - case 0x7941: // answer of the change of an account email - if (RFIFOREST(fd) < 30) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec de la modification de l'e-mail du compte [%s].\n", RFIFOP(fd,6)); - printf("Le compte [%s] n'existe pas.\n", RFIFOP(fd,6)); - ladmin_log("Echec de la modification de l'e-mail du compte. Le compte [%s] n'existe pas." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] e-mail changing failed.\n", RFIFOP(fd,6)); - printf("Account [%s] doesn't exist.\n", RFIFOP(fd,6)); - ladmin_log("Account e-mail changing failed. The compte [%s] doesn't exist." RETCODE, RFIFOP(fd,6)); - } - } else { - if (defaultlanguage == 'F') { - printf("Modification de l'e-mail du compte [%s][id: %d] réussie.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Modification de l'e-mail du compte [%s][id: %d] réussie." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("Account [%s][id: %d] e-mail successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Account [%s][id: %d] e-mail successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,30); - break; - - case 0x7943: // answer of the change of an account memo - if (RFIFOREST(fd) < 30) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec du changement du mémo du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); - ladmin_log("Echec du changement du mémo du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] memo changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); - ladmin_log("Account [%s] memo changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); - } - } else { - if (defaultlanguage == 'F') { - printf("Mémo du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Mémo du compte [%s][id: %d] changé avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("Account [%s][id: %d] memo successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Account [%s][id: %d] memo successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,30); - break; - - case 0x7945: // answer of an account id search - if (RFIFOREST(fd) < 30) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); - ladmin_log("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); - } else { - printf("Unable to find the account [%s] id. Account doesn't exist.\n", RFIFOP(fd,6)); - ladmin_log("Unable to find the account [%s] id. Account doesn't exist." RETCODE, RFIFOP(fd,6)); - } - } else { - if (defaultlanguage == 'F') { - printf("Le compte [%s] a pour id: %d.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Le compte [%s] a pour id: %d." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("The account [%s] have the id: %d.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("The account [%s] have the id: %d." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,30); - break; - - case 0x7947: // answer of an account name search - if (RFIFOREST(fd) < 30) - return 0; - if (strcmp((const char*)RFIFOP(fd,6), "") == 0) { - if (defaultlanguage == 'F') { - printf("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas.\n", RFIFOL(fd,2)); - ladmin_log("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas." RETCODE, RFIFOL(fd,2)); - } else { - printf("Unable to find the account [%d] name. Account doesn't exist.\n", RFIFOL(fd,2)); - ladmin_log("Unable to find the account [%d] name. Account doesn't exist." RETCODE, RFIFOL(fd,2)); - } - } else { - if (defaultlanguage == 'F') { - printf("Le compte [id: %d] a pour nom: %s.\n", RFIFOL(fd,2), RFIFOP(fd,6)); - ladmin_log("Le compte [id: %d] a pour nom: %s." RETCODE, RFIFOL(fd,2), RFIFOP(fd,6)); - } else { - printf("The account [id: %d] have the name: %s.\n", RFIFOL(fd,2), RFIFOP(fd,6)); - ladmin_log("The account [id: %d] have the name: %s." RETCODE, RFIFOL(fd,2), RFIFOP(fd,6)); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,30); - break; - - case 0x7949: // answer of an account validity limit set - if (RFIFOREST(fd) < 34) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); - ladmin_log("Echec du changement de la validité du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); - ladmin_log("Account [%s] validity limit changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); - } - } else { - time_t timestamp = RFIFOL(fd,30); - if (timestamp == 0) { - if (defaultlanguage == 'F') { - printf("Limite de validité du compte [%s][id: %d] changée avec succès en [illimité].\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès en [illimité]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited].\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } else { - char tmpstr[128]; - strftime(tmpstr, 24, date_format, localtime(×tamp)); - if (defaultlanguage == 'F') { - printf("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - } else { - printf("Validity Limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - ladmin_log("Validity Limit of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - } - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,34); - break; - - case 0x794b: // answer of an account ban set - if (RFIFOREST(fd) < 34) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); - ladmin_log("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); - ladmin_log("Account [%s] final date of banishment changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); - } - } else { - time_t timestamp = RFIFOL(fd,30); - if (timestamp == 0) { - if (defaultlanguage == 'F') { - printf("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } else { - char tmpstr[128]; - strftime(tmpstr, 24, date_format, localtime(×tamp)); - if (defaultlanguage == 'F') { - printf("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - } else { - printf("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - } - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,34); - break; - - case 0x794d: // answer of an account ban date/time changing - if (RFIFOREST(fd) < 34) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); - ladmin_log("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); - ladmin_log("Account [%s] final date of banishment changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); - } - } else { - time_t timestamp = RFIFOL(fd,30); - if (timestamp == 0) { - if (defaultlanguage == 'F') { - printf("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), RFIFOL(fd,2)); - ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } else { - char tmpstr[128]; - strftime(tmpstr, 24, date_format, localtime(×tamp)); - if (defaultlanguage == 'F') { - printf("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - } else { - printf("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - } - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,34); - break; - - case 0x794f: // answer of a broadcast - if (RFIFOREST(fd) < 4) - return 0; - if (RFIFOW(fd,2) == (unsigned short)-1) { - if (defaultlanguage == 'F') { - printf("Echec de l'envoi du message. Aucun server de char en ligne.\n"); - ladmin_log("Echec de l'envoi du message. Aucun server de char en ligne." RETCODE); - } else { - printf("Message sending failed. No online char-server.\n"); - ladmin_log("Message sending failed. No online char-server." RETCODE); - } - } else { - if (defaultlanguage == 'F') { - printf("Message transmis au server de logins avec succès.\n"); - ladmin_log("Message transmis au server de logins avec succès." RETCODE); - } else { - printf("Message successfully sended to login-server.\n"); - ladmin_log("Message successfully sended to login-server." RETCODE); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,4); - break; - - case 0x7951: // answer of an account validity limit changing - if (RFIFOREST(fd) < 34) - return 0; - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); - ladmin_log("Echec du changement de la validité du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); - } else { - printf("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); - ladmin_log("Account [%s] validity limit changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); - } - } else { - time_t timestamp = RFIFOL(fd,30); - if (timestamp == 0) { - if (defaultlanguage == 'F') { - printf("Limite de validité du compte [%s][id: %d] inchangée.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - printf("Le compte a une validité illimitée ou\n"); - printf("la modification est impossible avec les ajustements demandés.\n"); - ladmin_log("Limite de validité du compte [%s][id: %d] inchangée. Le compte a une validité illimitée ou la modification est impossible avec les ajustements demandés." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } else { - printf("Validity limit of the account [%s][id: %d] unchanged.\n", RFIFOP(fd,6), RFIFOL(fd,2)); - printf("The account have an unlimited validity limit or\n"); - printf("the changing is impossible with the proposed adjustments.\n"); - ladmin_log("Validity limit of the account [%s][id: %d] unchanged. The account have an unlimited validity limit or the changing is impossible with the proposed adjustments." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); - } - } else { - char tmpstr[128]; - strftime(tmpstr, 24, date_format, localtime(×tamp)); - if (defaultlanguage == 'F') { - printf("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - } else { - printf("Validity limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - ladmin_log("Validity limit of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); - } - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,34); - break; - - case 0x7953: // answer of a request about informations of an account (by account name/id) - if (RFIFOREST(fd) < 150 || RFIFOREST(fd) < (150 + RFIFOW(fd,148))) - return 0; - { - char userid[24], error_message[20], lastlogin[24], last_ip[16], email[40], memo[255]; - time_t ban_until_time; // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban) - time_t connect_until_time; // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited) - memcpy(userid, RFIFOP(fd,7), sizeof(userid)); - userid[sizeof(userid)-1] = '\0'; - memcpy(error_message, RFIFOP(fd,40), sizeof(error_message)); - error_message[sizeof(error_message)-1] = '\0'; - memcpy(lastlogin, RFIFOP(fd,60), sizeof(lastlogin)); - lastlogin[sizeof(lastlogin)-1] = '\0'; - memcpy(last_ip, RFIFOP(fd,84), sizeof(last_ip)); - last_ip[sizeof(last_ip)-1] = '\0'; - memcpy(email, RFIFOP(fd,100), sizeof(email)); - email[sizeof(email)-1] = '\0'; - connect_until_time = (time_t)RFIFOL(fd,140); - ban_until_time = (time_t)RFIFOL(fd,144); - memset(memo, '\0', sizeof(memo)); - strncpy(memo, (const char*)RFIFOP(fd,150), RFIFOW(fd,148)); - if (RFIFOL(fd,2) == -1) { - if (defaultlanguage == 'F') { - printf("Impossible de trouver le compte [%s]. Le compte n'existe pas.\n", parameters); - ladmin_log("Impossible de trouver le compte [%s]. Le compte n'existe pas." RETCODE, parameters); - } else { - printf("Unabled to find the account [%s]. Account doesn't exist.\n", parameters); - ladmin_log("Unabled to find the account [%s]. Account doesn't exist." RETCODE, parameters); - } - } else if (strlen(userid) == 0) { - if (defaultlanguage == 'F') { - printf("Impossible de trouver le compte [id: %s]. Le compte n'existe pas.\n", parameters); - ladmin_log("Impossible de trouver le compte [id: %s]. Le compte n'existe pas." RETCODE, parameters); - } else { - printf("Unabled to find the account [id: %s]. Account doesn't exist.\n", parameters); - ladmin_log("Unabled to find the account [id: %s]. Account doesn't exist." RETCODE, parameters); - } - } else { - if (defaultlanguage == 'F') { - ladmin_log("Réception d'information concernant un compte." RETCODE); - printf("Le compte a les caractéristiques suivantes:\n"); - } else { - ladmin_log("Receiving information about an account." RETCODE); - printf("The account is set with:\n"); - } - if (RFIFOB(fd,6) == 0) { - printf(" Id: %d (non-GM)\n", RFIFOL(fd,2)); - } else { - if (defaultlanguage == 'F') { - printf(" Id: %d (GM niveau %d)\n", RFIFOL(fd,2), (int)RFIFOB(fd,6)); - } else { - printf(" Id: %d (GM level %d)\n", RFIFOL(fd,2), (int)RFIFOB(fd,6)); - } - } - if (defaultlanguage == 'F') { - printf(" Nom: '%s'\n", userid); - if (RFIFOB(fd,31) == 0) - printf(" Sexe: Femme\n"); - else if (RFIFOB(fd,31) == 1) - printf(" Sexe: Male\n"); - else - printf(" Sexe: Serveur\n"); - } else { - printf(" Name: '%s'\n", userid); - if (RFIFOB(fd,31) == 0) - printf(" Sex: Female\n"); - else if (RFIFOB(fd,31) == 1) - printf(" Sex: Male\n"); - else - printf(" Sex: Server\n"); - } - printf(" E-mail: %s\n", email); - switch(RFIFOL(fd,36)) { - case 0: - if (defaultlanguage == 'F') - printf(" Statut: 0 [Compte Ok]\n"); - else - printf(" Statut: 0 [Account OK]\n"); - break; - case 1: - printf(" Statut: 1 [Unregistered ID]\n"); - break; - case 2: - printf(" Statut: 2 [Incorrect Password]\n"); - break; - case 3: - printf(" Statut: 3 [This ID is expired]\n"); - break; - case 4: - printf(" Statut: 4 [Rejected from Server]\n"); - break; - case 5: - printf(" Statut: 5 [You have been blocked by the GM Team]\n"); - break; - case 6: - printf(" Statut: 6 [Your Game's EXE file is not the latest version]\n"); - break; - case 7: - printf(" Statut: 7 [You are Prohibited to log in until %s]\n", error_message); - break; - case 8: - printf(" Statut: 8 [Server is jammed due to over populated]\n"); - break; - case 9: - printf(" Statut: 9 [No MSG]\n"); - break; - default: // 100 - printf(" Statut: %d [This ID is totally erased]\n", RFIFOL(fd,36)); - break; - } - if (defaultlanguage == 'F') { - if (ban_until_time == 0) { - printf(" Banissement: non banni.\n"); - } else { - char tmpstr[128]; - strftime(tmpstr, 24, date_format, localtime(&ban_until_time)); - printf(" Banissement: jusqu'au %s.\n", tmpstr); - } - if (RFIFOL(fd,32) > 1) - printf(" Compteur: %d connexions.\n", RFIFOL(fd,32)); - else - printf(" Compteur: %d connexion.\n", RFIFOL(fd,32)); - printf(" Dernière connexion le: %s (ip: %s)\n", lastlogin, last_ip); - if (connect_until_time == 0) { - printf(" Limite de validité: illimité.\n"); - } else { - char tmpstr[128]; - strftime(tmpstr, 24, date_format, localtime(&connect_until_time)); - printf(" Limite de validité: jusqu'au %s.\n", tmpstr); - } - } else { - if (ban_until_time == 0) { - printf(" Banishment: not banished.\n"); - } else { - char tmpstr[128]; - strftime(tmpstr, 24, date_format, localtime(&ban_until_time)); - printf(" Banishment: until %s.\n", tmpstr); - } - if (RFIFOL(fd,32) > 1) - printf(" Count: %d connections.\n", RFIFOL(fd,32)); - else - printf(" Count: %d connection.\n", RFIFOL(fd,32)); - printf(" Last connection at: %s (ip: %s)\n", lastlogin, last_ip); - if (connect_until_time == 0) { - printf(" Validity limit: unlimited.\n"); - } else { - char tmpstr[128]; - strftime(tmpstr, 24, date_format, localtime(&connect_until_time)); - printf(" Validity limit: until %s.\n", tmpstr); - } - } - printf(" Memo: '%s'\n", memo); - } - } - bytes_to_read = 0; - RFIFOSKIP(fd,150 + RFIFOW(fd,148)); - break; - - default: - printf("Remote administration has been disconnected (unknown packet).\n"); - ladmin_log("'End of connection, unknown packet." RETCODE); - session[fd]->eof = 1; - return 0; - } - } - - // if we don't wait new packets, do the prompt - prompt(); - - return 0; -} - -//------------------------------------ -// Function to connect to login-server -//------------------------------------ -int Connect_login_server() { - if (defaultlanguage == 'F') { - printf("Essai de connection au server de logins...\n"); - ladmin_log("Essai de connection au server de logins..." RETCODE); - } else { - printf("Attempt to connect to login-server...\n"); - ladmin_log("Attempt to connect to login-server..." RETCODE); - } - - login_fd = make_connection(login_ip, loginserverport); - -#ifdef PASSWORDENC - if (passenc == 0) { -#endif - WFIFOW(login_fd,0) = 0x7918; // Request for administation login - WFIFOW(login_fd,2) = 0; // no encrypted - memcpy(WFIFOP(login_fd,4), loginserveradminpassword, 24); - WFIFOSET(login_fd,28); - bytes_to_read = 1; - if (defaultlanguage == 'F') { - printf("Envoi du mot de passe...\n"); - ladmin_log("Envoi du mot de passe..." RETCODE); - } else { - printf("Sending of the password...\n"); - ladmin_log("Sending of the password..." RETCODE); - } -#ifdef PASSWORDENC - } else { - WFIFOW(login_fd,0) = 0x791a; // Sending request about the coding key - WFIFOSET(login_fd,2); - bytes_to_read = 1; - if (defaultlanguage == 'F') { - printf("Demande de la clef MD5...\n"); - ladmin_log("Demande de la clef MD5..." RETCODE); - } else { - printf("Request about the MD5 key...\n"); - ladmin_log("Request about the MD5 key..." RETCODE); - } - } -#endif - - return 0; -} - -//------------------------------------------------- -// Return numerical value of a switch configuration -// on/off, english, français, deutsch, español -//------------------------------------------------- -int config_switch(const char *str) { - if (strcmpi(str, "on") == 0 || strcmpi(str, "yes") == 0 || strcmpi(str, "oui") == 0 || strcmpi(str, "ja") == 0 || strcmpi(str, "si") == 0) - return 1; - if (strcmpi(str, "off") == 0 || strcmpi(str, "no") == 0 || strcmpi(str, "non") == 0 || strcmpi(str, "nein") == 0) - return 0; - - return atoi(str); -} - -//----------------------------------- -// Reading general configuration file -//----------------------------------- -int ladmin_config_read(const char *cfgName) { - char line[1024], w1[1024], w2[1024]; - FILE *fp; - - fp = fopen(cfgName, "r"); - if (fp == NULL) { - if (defaultlanguage == 'F') { - printf("\033[0mFichier de configuration (%s) non trouvé.\n", cfgName); - } else { - printf("\033[0mConfiguration file (%s) not found.\n", cfgName); - } - return 1; - } - - if (defaultlanguage == 'F') { - printf("\033[0m---Début de lecture du fichier de configuration Ladmin (%s)\n", cfgName); - } else { - printf("\033[0m---Start reading of Ladmin configuration file (%s)\n", cfgName); - } - while(fgets(line, sizeof(line)-1, fp)) { - if (line[0] == '/' && line[1] == '/') - continue; - - line[sizeof(line)-1] = '\0'; - if (sscanf(line, "%[^:]: %[^\r\n]", w1, w2) == 2) { - remove_control_chars((unsigned char *) w1); - remove_control_chars((unsigned char *) w2); - - if(strcmpi(w1,"login_ip")==0){ - struct hostent *h = gethostbyname (w2); - if (h != NULL) { - if (defaultlanguage == 'F') { - printf("Adresse du serveur de logins: %s -> %d.%d.%d.%d\n", w2, (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]); - } else { - printf("Login server IP address: %s -> %d.%d.%d.%d\n", w2, (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]); - } - sprintf(loginserverip, "%d.%d.%d.%d", (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]); - } else - memcpy(loginserverip, w2, 16); - } else if (strcmpi(w1, "login_port") == 0) { - loginserverport = atoi(w2); - } else if (strcmpi(w1, "admin_pass") == 0) { - strncpy(loginserveradminpassword, w2, sizeof(loginserveradminpassword)); - loginserveradminpassword[sizeof(loginserveradminpassword)-1] = '\0'; -#ifdef PASSWORDENC - } else if (strcmpi(w1, "passenc") == 0) { - passenc = atoi(w2); - if (passenc < 0 || passenc > 2) - passenc = 0; -#endif - } else if (strcmpi(w1, "defaultlanguage") == 0) { - if (w2[0] == 'F' || w2[0] == 'E') - defaultlanguage = w2[0]; - } else if (strcmpi(w1, "ladmin_log_filename") == 0) { - strncpy(ladmin_log_filename, w2, sizeof(ladmin_log_filename)); - ladmin_log_filename[sizeof(ladmin_log_filename)-1] = '\0'; - } else if (strcmpi(w1, "date_format") == 0) { // note: never have more than 19 char for the date! - switch (atoi(w2)) { - case 0: - strcpy(date_format, "%d-%m-%Y %H:%M:%S"); // 31-12-2004 23:59:59 - break; - case 1: - strcpy(date_format, "%m-%d-%Y %H:%M:%S"); // 12-31-2004 23:59:59 - break; - case 2: - strcpy(date_format, "%Y-%d-%m %H:%M:%S"); // 2004-31-12 23:59:59 - break; - case 3: - strcpy(date_format, "%Y-%m-%d %H:%M:%S"); // 2004-12-31 23:59:59 - break; - } - } else if (strcmpi(w1, "import") == 0) { - ladmin_config_read(w2); - } - } - } - fclose(fp); - - login_ip = inet_addr(loginserverip); - - if (defaultlanguage == 'F') { - printf("---Lecture du fichier de configuration Ladmin terminée.\n"); - } else { - printf("---End reading of Ladmin configuration file.\n"); - } - - return 0; -} - -//-------------------------------------- -// Function called at exit of the server -//-------------------------------------- -void do_final(void) { - - if (already_exit_function == 0) { - delete_session(login_fd); - - if (defaultlanguage == 'F') { - printf("\033[0m----Fin de Ladmin (fin normale avec fermeture de tous les fichiers).\n"); - ladmin_log("----Fin de Ladmin (fin normale avec fermeture de tous les fichiers)." RETCODE); - } else { - printf("\033[0m----End of Ladmin (normal end with closing of all files).\n"); - ladmin_log("----End of Ladmin (normal end with closing of all files)." RETCODE); - } - - already_exit_function = 1; - } -} - -//------------------------ -// Main function of ladmin -//------------------------ -int do_init(int argc, char **argv) { - // read ladmin configuration - ladmin_config_read((argc > 1) ? argv[1] : LADMIN_CONF_NAME); - - ladmin_log(""); - if (defaultlanguage == 'F') { - ladmin_log("Fichier de configuration lu." RETCODE); - } else { - ladmin_log("Configuration file readed." RETCODE); - } - - srand(time(NULL)); - - set_termfunc(do_final); - set_defaultparse(parse_fromlogin); - - if (defaultlanguage == 'F') { - printf("Outil d'administration à distance de eAthena.\n"); - printf("(pour eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION, ATHENA_MINOR_VERSION, ATHENA_REVISION); - } else { - printf("EAthena login-server administration tool.\n"); - printf("(for eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION, ATHENA_MINOR_VERSION, ATHENA_REVISION); - } - - if (defaultlanguage == 'F') { - ladmin_log("Ladmin est prêt." RETCODE); - printf("Ladmin est \033[1;32mprêt\033[0m.\n\n"); - } else { - ladmin_log("Ladmin is ready." RETCODE); - printf("Ladmin is \033[1;32mready\033[0m.\n\n"); - } - - Connect_login_server(); - - atexit(do_final); - - return 0; -} |