diff options
Diffstat (limited to 'tools/ladmin')
| -rw-r--r-- | tools/ladmin | 3793 |
1 files changed, 3793 insertions, 0 deletions
diff --git a/tools/ladmin b/tools/ladmin new file mode 100644 index 000000000..e3319d5de --- /dev/null +++ b/tools/ladmin @@ -0,0 +1,3793 @@ +#!/usr/bin/perl
+use POSIX;
+##########################################################################
+# EAthena login-server remote administration tool
+# New ladamin by [Yor]
+##########################################################################
+#-------------------------------INSTRUCTIONS------------------------------
+# Set the 4 variables below:
+# IP of the login server.
+# Port where the login-server listens incoming packets.
+# Password of administration (same of config_athena.conf).
+# Displayed language of the sofware (if not correct, english is used).
+# IMPORTANT:
+# Be sure that you authorize remote administration in login-server
+# (see login_athena.conf, 'admin_state' parameter)
+#-------------------------------------------------------------------------
+my($loginserverip) = "127.0.0.1"; # IP of login-server
+my($loginserverport) = 6900; # Port of login-server
+my($loginserveradminpassword) = "admin"; # Administration password
+my($connecttimeout) = 10; # Timeout of connection (in seconds)
+my($passenc) = 2; # Encoding type of the password
+my($defaultlanguage) = "E"; # Default language (F: Français/E: English)
+ # (if it's not 'F', default is English)
+
+#-------------------------------------------------------------------------
+# LIST of COMMANDs that you can type at the prompt:
+# To use these commands you can only type only the first letters.
+# You must type a minimum of letters (you can not type 'a',
+# because ladmin doesn't know if it's for 'aide' or for 'add')
+# <Example> q <= quit, li <= list, pass <= passwd, etc.
+#
+# Note: every time you must give a account_name, you can use "" or '' (spaces can be included)
+#
+# aide/help/?
+# Display the description of the commands
+# aide/help/? [command]
+# Display the description of the specified command
+#
+# add <account_name> <sex> <password>
+# Create an account with the default email (a@a.com).
+# Concerning the sex, only the first letter is used (F or M).
+# The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.
+# When the password is omitted, the input is done without displaying of the pressed keys.
+# <example> add testname Male testpass
+#
+# ban/banish yyyy/mm/dd hh:mm:ss <account name>
+# Changes the final date of a banishment of an account.
+# Same command of banset, except that account_name is at end
+#
+# banadd <account_name> <modifier>
+# Adds or substracts time from the final date of a banishment of an account.
+# Modifier is done as follows:
+# Adjustment value (-1, 1, +1, etc...)
+# Modified element:
+# a or y: year
+# m: month
+# j or d: day
+# h: hour
+# mn: minute
+# s: second
+# <example> banadd testname +1m-2mn1s-6y
+# this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
+# NOTE: If you modify the final date of a non-banished account,
+# you fix the final date to (actual time +- adjustments)
+#
+# banset <account_name> yyyy/mm/dd [hh:mm:ss]
+# Changes the final date of a banishment of an account.
+# Default time: 23:59:59
+# banset <account_name> 0
+# Set a non-banished account (0 = unbanished).
+#
+# block <account name>
+# Set state 5 (You have been blocked by the GM Team) to an account.
+# Same command of state <account_name> 5.
+#
+# check <account_name> <password>
+# Check the validity of a password for an account
+# NOTE: Server will never sends back a password.
+# It's the only method you have to know if a password is correct.
+# The other method is to have a ('physical') access to the accounts file.
+#
+# create <account_name> <sex> <email> <password>
+# Like the 'add' command, but with e-mail moreover.
+# <example> create testname Male my@mail.com testpass
+#
+# del <account name>
+# Remove an account.
+# This order requires confirmation. After confirmation, the account is deleted.
+#
+# email <account_name> <email>
+# Modify the e-mail of an account.
+#
+# getcount
+# Give the number of players online on all char-servers.
+#
+# gm <account_name> [GM_level]
+# Modify the GM level of an account.
+# Default value remove GM level (GM level = 0).
+# <example> gm testname 80
+#
+# id <account name>
+# Give the id of an account.
+#
+# info <account_id>
+# Display complete information of an account.
+#
+# kami <message>
+# Sends a broadcast message on all map-server (in yellow).
+# kamib <message>
+# Sends a broadcast message on all map-server (in blue).
+#
+# language <language>
+# Change the language of displaying.
+#
+# list/ls [start_id [end_id]]
+# Display a list of accounts.
+# 'start_id', 'end_id': indicate end and start identifiers.
+# Research by name is not possible with this command.
+# <example> list 10 9999999
+#
+# listBan/lsBan [start_id [end_id]]
+# Like list/ls, but only for accounts with state or banished
+#
+# listGM/lsGM [start_id [end_id]]
+# Like list/ls, but only for GM accounts
+#
+# listOK/lsOK [start_id [end_id]]
+# Like list/ls, but only for accounts without state and not banished
+#
+# memo <account_name> <memo>
+# Modify the memo of an account.
+# 'memo': it can have until 253 characters (with spaces or not).
+#
+# name <account_id>
+# Give the name of an account.
+#
+# passwd <account_name> <new_password>
+# Change the password of an account.
+# When new password is omitted, the input is done without displaying of the pressed keys.
+#
+# quit/end/exit
+# End of the program of administration
+#
+# reloadGM
+# Reload GM configuration file
+#
+# search <expression>
+# Seek accounts.
+# Displays the accounts whose names correspond.
+# search -r/-e/--expr/--regex <expression>
+# Seek accounts by regular expression.
+# Displays the accounts whose names correspond.
+#
+# sex <account_name> <sex>
+# Modify the sex of an account.
+# <example> sex testname Male
+#
+# state <account_name> <new_state> <error_message_#7>
+# Change the state of an account.
+# 'new_state': state is the state of the packet 0x006a + 1. The possibilities are:
+# 0 = Account ok 6 = Your Game's EXE file is not the latest version
+# 1 = Unregistered ID 7 = You are Prohibited to log in until %s
+# 2 = Incorrect Password 8 = Server is jammed due to over populated
+# 3 = This ID is expired 9 = No MSG
+# 4 = Rejected from Server 100 = This ID has been totally erased
+# 5 = You have been blocked by the GM Team
+# all other values are 'No MSG', then use state 9 please.
+# 'error_message_#7': message of the code error 6 = Your are Prohibited to log in until %s (packet 0x006a)
+#
+# timeadd <account_name> <modifier>
+# Adds or substracts time from the validity limit of an account.
+# Modifier is done as follows:
+# Adjustment value (-1, 1, +1, etc...)
+# Modified element:
+# a or y: year
+# m: month
+# j or d: day
+# h: hour
+# mn: minute
+# s: second
+# <example> timeadd testname +1m-2mn1s-6y
+# this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
+# NOTE: You can not modify a unlimited validity limit.
+# If you want modify it, you want probably create a limited validity limit.
+# So, at first, you must set the validity limit to a date/time.
+#
+# timeset <account_name> yyyy/mm/dd [hh:mm:ss]
+# Changes the validity limit of an account.
+# Default time: 23:59:59
+# timeset <account_name> 0
+# Gives an unlimited validity limit (0 = unlimited).
+#
+# unban/unbanish <account name>
+# Unban an account.
+# Same command of banset 0.
+#
+# unblock <account name>
+# Set state 0 (Account ok) to an account.
+# Same command of state <account_name> 0.
+#
+# version
+# Display the version of the login-server.
+#
+# who <account name>
+# Displays complete information of an account.
+#
+#-------------------------------------------------------------------------
+# Possibilities to execute ladmin in command line by usage of the software with a parameter:
+# ./ladmin --mode param1 ...
+#
+# --makesymlink -- Create the symbolic links for a use in shell
+# --add <account_name> <sex> <password> -- Create an account with the default email (or -a)
+# --ban yyyy/mm/dd hh:mm:ss <account_name> -- Change the final date of a banishment of an account (or -b)
+# --banadd <account_name> <modifier> -- Add or substract time from the final date of a banishment of an account (or - ba)
+# --banset <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the final date of a banishment of an account (or -bs)
+# --banset <account_name> 0 -- Unbanish an account (or -bs)
+# --block <account_name> -- Set state 5 to an account (or -bl)
+# --check <account_name> <password> -- Check the validity of a password for an account (or -check)
+# --create <account_name> <sex> <email> <password> -- Create an account with email (or -c)
+# --del <account_name> -- Remove an account (or -d)
+# --email <account_name> <email> -- Modify an email of an account (or -e)
+# --getcount -- Give the number of players online on all char-servers (or -g)
+# --gm <account_name> <GM_level> -- Change the GM level of an account (or -gm)
+# --id <account_name> -- Give the id of an account (or -i)
+# --info <account_id> -- Display complete information of an account (or -info)
+# --kami <message> -- Sends a broadcast message on all map-server (in yellow).
+# --kamib <message> -- Sends a broadcast message on all map-server (in blue).
+# --language <language> -- Change the language of displaying (-lang).
+# --list [First_id [Last_id]] -- Display a list of accounts (or -l)
+# --listBan [start_id [end_id]] -- Display a list of accounts with state or banished (or -lBan)
+# --listGM [First_id [Last_id]] -- Display a list of GM accounts (or -lGM)
+# --listOK [start_id [end_id]] -- Display a list of accounts without state and not banished (or -lOK)
+# --memo <account_name> <memo> -- Modify the memo of an account (or -e)
+# --name <account_id> -- Give the name of an account (or -n)
+# --passwd <account_name> <new_password> -- Change the password of an account (or -p)
+# --reloadGM -- Reload GM configuration file (or -r)
+# --search <expression> -- Seek accounts (or -s)
+# --search -e/-r/--expr/--regex <expression> -- Seek accounts by REGEX (or -s)
+# --sex <account_name> <sex> -- Change the sex of an account (or -sex)
+# --state <account_name> <new_state> <error_message_#7> -- Change the state of an account (or -t)
+# --timeadd <account_name> <modifier> -- Add or substract time from the validity limit of an account (or - ta)
+# --timeset <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit of an account (or -ts)
+# --timeset <account_name> 0 -- Give a unlimited validity limit (or -ts)
+# --unban/unbanish <account_name> -- Unban an account (or -uba)
+# --unblock <account_name> -- Set state 0 to an account (or -ubl)
+# --version -- Display the version of the login-server (or -v)
+# --who <account_name> -- Display complete information of an account (or -w)
+#
+# <example> ./ladmin --addaccount testname Male testpass
+#
+#-------------------------------------------------------------------------
+# Possibilities to execute ladmin with symbolic links in Shell
+# To create the symbolic links, execute ladmin with the '-- makesymlink' option.
+#
+# addaccount <account_name> <sex> <password> -- Create an account with the default email
+# banaccount yyyy/mm/dd hh:mm:ss <account_name> -- Change the final date of a banishment of an account
+# banaddaccount <account_name> <modifier> -- Add or substract time from the final date of a banishment of an account
+# bansetaccount <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the final date of a banishment of an account
+# bansetaccount <account_name> 0 -- Unbanish an account
+# blockaccount <account_name> -- Set state 5 (blocked by the GM Team) to an account
+# checkaccount <account_name> <password> -- Check the validity of a password for an account
+# createaccount <account_name> <sex> <email> <password> -- Create an account with email
+# delaccount <account_name> -- Remove an account
+# emailaccount <account_name> <email> -- Modify an email of an account
+# getcount -- Give the number of players online on all char-servers
+# gmaccount <account_name> <GM_level> -- Change the GM level of an account
+# idaccount <account_name> -- Give the id of an account
+# infoaccount <account_id> -- Display complete information of an account
+# kami <message> -- Sends a broadcast message on all map-server (in yellow).
+# kamib <message> -- Sends a broadcast message on all map-server (in blue).
+# ladminlanguage <language> -- Change the language of displaying.
+# listaccount [First_id [Last_id]] -- Display a list of accounts
+# listBanaccount [start_id [end_id]] -- Display a list of accounts with state or banished
+# listGMaccount [First_id [Last_id]] -- Display a list of GM accounts
+# listOKaccount [start_id [end_id]] -- Display a list of accounts without state and not banished
+# loginserverversion -- Display the version of the login-server
+# memoaccount <account_name> <memo> -- Modify the memo of an account
+# nameaccount <account_id> -- Give the name of an account
+# passwdaccount <account_name> <new_password> -- Change the password of an account
+# reloadGM -- Reload GM configuration file
+# searchaccount <expression> -- Seek accounts
+# searchaccount -e/-r/--expr/--regex <expression> -- Seek accounts by REGEX
+# sexaccount <account_name> <sex> -- Change the sex of an account (or -sex)
+# stateaccount <account_name> <new_state> <error_message_#7> -- Change the state of an account
+# timeaddaccount <account_name> <modifier> -- Add or substract time from the validity limit of an account
+# timesetaccount <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit of an account
+# timesetaccount <account_name> 0 -- Give a unlimited validity limit
+# unbanaccount <account_name> -- Unban an account
+# unblockaccount <account_name> -- Set state 0 (Account ok) to an account
+# whoaccount <account_name> -- Display complete information of an account
+# <exemple> ./addaccount testname Male testpass
+#
+#-------------------------------------------------------------------------
+# About the encoding:
+#
+# The Digest::MD5 module is necessary to use the encrypted password system.
+# When the software cannot found the Digest::MD5 module,
+# encoding is automatically disabled ($passenc=0), which allows
+# to use this program in any cases.
+#
+#-------------------------------------------------------------------------
+# How to use ladmin with UNIX:
+#
+# You excecute ladmin as a standard command.
+# <Example of preparation to have an access to ladmin>
+# $ mv ladmin ladmin_org
+# $ nkf -eLu ladmin_org > ladmin
+# $ chmod 700 ladmin
+# <Example to start directly ladmin>
+# $ perl ladmin
+#
+##########################################################################
+
+
+use strict;
+use IO::Socket;
+use Term::ReadLine;
+eval { use POSIX qw(:termios_h); };
+eval { use Digest::MD5 qw(md5); } if $passenc;
+$passenc = 0 if($@);
+
+my($ver) = "1.00";
+
+# Start of termios
+my($termios, $orgterml, $termlecho, $termlnoecho) = ();
+eval{
+ $termios = POSIX::Termios->new();
+ $termios->getattr(fileno(STDIN));
+ $orgterml = $termios->getlflag();
+ $termlecho = ECHO | ECHOK | ICANON;
+ $termlnoecho = $orgterml & ~$termlecho;
+};
+
+# Modification of termios for the displaying of passwords (no displays for pressed keys)
+sub cbreak() {
+ if ($termios) {
+ $termios->setlflag($termlnoecho);
+ $termios->setcc(VTIME, 1);
+ $termios->setattr(fileno(STDIN), TCSANOW);
+ }
+}
+# Modification of termios to return at the normal displaying (after input of the passwords)
+sub cooked() {
+ if ($termios) {
+ $termios->setlflag($orgterml);
+ $termios->setcc(VTIME,0);
+ $termios->setattr(fileno(STDIN),TCSANOW);
+ }
+}
+END{ cooked() }
+
+if ($defaultlanguage eq "F") {
+ print "Outil d'administration à distance de eAthena V.$ver\n";
+} else {
+ print "EAthena login-server administration tool V.$ver\n";
+}
+
+# Creation of the symbolic links for call of the program in line command of the shell
+if ($ARGV[0] eq "--makesymlink") {
+ symlink $0, "loginserverversion";
+ symlink $0, "addaccount";
+ symlink $0, "banaccount";
+ symlink $0, "banaddaccount";
+ symlink $0, "bansetaccount";
+ symlink $0, "blockaccount";
+ symlink $0, "checkaccount";
+ symlink $0, "createaccount";
+ symlink $0, "delaccount";
+ symlink $0, "emailaccount";
+ symlink $0, "getcount";
+ symlink $0, "gmaccount";
+ symlink $0, "idaccount";
+ symlink $0, "infoaccount";
+ symlink $0, "kami";
+ symlink $0, "kamib";
+ symlink $0, "ladminlanguage";
+ symlink $0, "listaccount";
+ symlink $0, "listBanaccount";
+ symlink $0, "listGMaccount";
+ symlink $0, "listOKaccount";
+ symlink $0, "memoaccount";
+ symlink $0, "nameaccount";
+ symlink $0, "passwdaccount";
+ symlink $0, "reloadGM";
+ symlink $0, "searchaccount";
+ symlink $0, "sexaccount";
+ symlink $0, "stateaccount";
+ symlink $0, "timeaddaccount";
+ symlink $0, "timesetaccount";
+ symlink $0, "unbanaccount";
+ symlink $0, "unblockaccount";
+ symlink $0, "whoaccount";
+ if ($defaultlanguage eq "F") {
+ print "Liens symbliques créés.\n";
+ } else {
+ print "Symbolic links created.\n";
+ }
+ exit(0);
+}
+
+# Connection to the login-server
+my($so,$er) = ();
+eval{
+ $so = IO::Socket::INET->new(
+ PeerAddr=> $loginserverip,
+ PeerPort=> $loginserverport,
+# Proto => "tcp",
+ Timeout => $connecttimeout) or $er = 1;
+};
+if ($er || $@) {
+ if ($defaultlanguage eq "F") {
+ print "\nImpossible de se connecter au serveur de login [${loginserverip}:$loginserverport] !\n";
+ } else {
+ print "\nImpossible to have a connection with the login-server [${loginserverip}:$loginserverport] !\n";
+ }
+ print "$!\n"; # Displaying of the error
+ exit(2);
+}
+
+# Sending the administration password
+if ($passenc == 0) {
+ print $so pack("v2a24",0x7918,0,$loginserveradminpassword);
+ $so->flush();
+} else {
+ print $so pack("v",0x791a);
+ $so->flush();
+ my($buf) = readso(4);
+ if (unpack("v",$buf) != 0x01dc) {
+ if ($defaultlanguage eq "F") {
+ print "Erreur au login (échec de la création de la clef md5).\n";
+ } else {
+ print "Error at login (failure of the md5 key creation).\n";
+ }
+ }
+ $buf = readso(unpack("x2v",$buf)-4);
+ my($md5bin) = md5(($passenc == 1) ? $buf.$loginserveradminpassword : $loginserveradminpassword.$buf);
+ print $so pack("v2a16",0x7918,$passenc,$md5bin);
+ $so->flush();
+}
+
+# Waiting of the server reply
+my($buf) = readso(3);
+
+if (unpack("v",$buf) != 0x7919 || unpack("x2c",$buf) != 0) {
+ if ($defaultlanguage eq "F") {
+ print "Erreur de login:\n";
+ print " - mot de passe incorrect,\n";
+ print " - système d'administration non activé, ou\n";
+ print " - IP non autorisée.\n";
+ } else {
+ print "Error at login:\n";
+ print " - incorrect password,\n";
+ print " - administration system not activated, or\n";
+ print " - unauthorised IP.\n";
+ }
+ quit();
+ exit(4);
+}
+
+if ($defaultlanguage eq "F") {
+ print "Connexion établie.\n";
+} else {
+ print "Established connection.\n";
+}
+
+#-------------------------------------------------------------------------
+# Here are checked the command lines with arguments and symbolic links (no prompt)
+
+if ($0 =~ /addaccount$/ ||
+ (($ARGV[0] eq "-a" || $ARGV[0] eq "--add") && ((shift @ARGV), 1))) {
+ my($r) = addaccount($ARGV[0], $ARGV[1], $ARGV[2]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /banaccount$/ || $0 =~ /banishaccount$/ ||
+ (($ARGV[0] eq "-b" || $ARGV[0] eq "--ban" || $ARGV[0] eq "--banish") && ((shift @ARGV), 1))) {
+ my($r) = bansetaccount($ARGV[1], $ARGV[2], $ARGV[0]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /banaddaccount$/ ||
+ (($ARGV[0] eq "-ba" || $ARGV[0] eq "--banadd") && ((shift @ARGV), 1))) {
+ my($r) = banaddaccount($ARGV[0], $ARGV[1]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /bansetaccount$/ ||
+ (($ARGV[0] eq "-bs" || $ARGV[0] eq "--banset") && ((shift @ARGV), 1))) {
+ my($r) = bansetaccount($ARGV[0], $ARGV[1], $ARGV[2]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /blockaccount$/ ||
+ (($ARGV[0] eq "-bl" || $ARGV[0] eq "--block") && ((shift @ARGV), 1))) {
+ my($r) = changestate($ARGV[0], 5, "");
+ quit();
+ exit($r);
+} elsif ($0 =~ /checkaccount$/ ||
+ (($ARGV[0] eq "-check" || $ARGV[0] eq "--check") && ((shift @ARGV), 1))) {
+ my($r) = checkaccount($ARGV[0], $ARGV[1]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /createaccount$/ ||
+ (($ARGV[0] eq "-c" || $ARGV[0] eq "--create") && ((shift @ARGV), 1))) {
+ my($r) = createaccount($ARGV[0], $ARGV[1], $ARGV[2], $ARGV[3]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /delaccount$/ ||
+ (($ARGV[0] eq "-d" || $ARGV[0] eq "--del") && ((shift @ARGV), 1))) {
+ my($r) = delaccount($ARGV[0]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /emailaccount$/ ||
+ (($ARGV[0] eq "-e" || $ARGV[0] eq "--email") && ((shift @ARGV), 1))) {
+ my($r) = changeemail($ARGV[0], $ARGV[1]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /getcount$/ ||
+ (($ARGV[0] eq "-g" || $ARGV[0] eq "--getcount") && ((shift @ARGV), 1))) {
+ my($r) = getlogincount();
+ quit();
+ exit($r);
+} elsif ($0 =~ /gmaccount$/ ||
+ (($ARGV[0] eq "-gm" || $ARGV[0] eq "--gm") && ((shift @ARGV), 1))) {
+ my($r) = changegmlevel($ARGV[0], $ARGV[1]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /id$/ ||
+ (($ARGV[0] eq "-i" || $ARGV[0] eq "--id") && ((shift @ARGV), 1))) {
+ my($r) = idaccount($ARGV[0]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /infoaccount$/ ||
+ (($ARGV[0] eq "-info" || $ARGV[0] eq "--info") && ((shift @ARGV), 1))) {
+ my($r) = infoaccount($ARGV[0]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /kami$/ ||
+ (($ARGV[0] eq "-kami" || $ARGV[0] eq "--kami") && ((shift @ARGV), 1))) {
+ my($r) = sendbroadcast(0, $ARGV[0]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /kamib$/ ||
+ (($ARGV[0] eq "-kamib" || $ARGV[0] eq "--kamib") && ((shift @ARGV), 1))) {
+ my($r) = sendbroadcast(0x10, $ARGV[0]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /ladminlanguage$/ ||
+ (($ARGV[0] eq "-lang" || $ARGV[0] eq "--language") && ((shift @ARGV), 1))) {
+ my($r) = changelanguage($ARGV[0]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /listaccount$/ ||
+ (($ARGV[0] eq "-l" || $ARGV[0] eq "--list") && ((shift @ARGV), 1))) {
+ my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 0); # 0: to list all
+ quit();
+ exit($r);
+} elsif ($0 =~ /listBanaccount$/ ||
+ (($ARGV[0] eq "-lBan" || $ARGV[0] eq "--listBan") && ((shift @ARGV), 1))) {
+ my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 3); # 3: to list only accounts with state or banished
+ quit();
+ exit($r);
+} elsif ($0 =~ /listGMaccount$/ ||
+ (($ARGV[0] eq "-lGM" || $ARGV[0] eq "--listGM") && ((shift @ARGV), 1))) {
+ my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 1); # 1: to list only GM
+ quit();
+ exit($r);
+} elsif ($0 =~ /listOKaccount$/ ||
+ (($ARGV[0] eq "-lOK" || $ARGV[0] eq "--listOK") && ((shift @ARGV), 1))) {
+ my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 4); # 4: to list only accounts without state and not banished
+ quit();
+ exit($r);
+} elsif ($0 =~ /loginserverversion$/ ||
+ (($ARGV[0] eq "-v" || $ARGV[0] eq "--version") && ((shift @ARGV), 1))) {
+ my($r) = checkloginversion();
+ quit();
+ exit($r);
+} elsif ($0 =~ /memoaccount$/ ||
+ (($ARGV[0] eq "-m" || $ARGV[0] eq "--memo") && ((shift @ARGV), 1))) {
+ my($r) = changememo($ARGV[0], $ARGV[1]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /nameaccount$/ ||
+ (($ARGV[0] eq "-n" || $ARGV[0] eq "--name") && ((shift @ARGV), 1))) {
+ my($r) = nameaccount(int($ARGV[0]));
+ quit();
+ exit($r);
+} elsif ($0 =~ /passwdaccount$/ ||
+ (($ARGV[0] eq "-p" || $ARGV[0] eq "--passwd") && ((shift @ARGV), 1))) {
+ my($r) = changepasswd($ARGV[0], $ARGV[1]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /reloadGM$/ ||
+ (($ARGV[0] eq "-r" || $ARGV[0] eq "--reloadGM") && ((shift @ARGV), 1))) {
+ my($r) = reloadGM();
+ quit();
+ exit($r);
+} elsif ($0 =~ /searchaccount$/ ||
+ (($ARGV[0] eq "-s" || $ARGV[0] eq "--search") && ((shift @ARGV), 1))) {
+ my($r) = searchaccount($ARGV[0], $ARGV[1]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /sexaccount$/ ||
+ (($ARGV[0] eq "-sex" || $ARGV[0] eq "--sex") && ((shift @ARGV), 1))) {
+ my($r) = changesex($ARGV[0], $ARGV[1]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /stateaccount$/ ||
+ (($ARGV[0] eq "-t" || $ARGV[0] eq "--state") && ((shift @ARGV), 1))) {
+ my($r) = changestate($ARGV[0], $ARGV[1], $ARGV[2]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /timeaddaccount$/ ||
+ (($ARGV[0] eq "-ta" || $ARGV[0] eq "--timeadd") && ((shift @ARGV), 1))) {
+ my($r) = timeaddaccount($ARGV[0], $ARGV[1]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /timesetaccount$/ ||
+ (($ARGV[0] eq "-ts" || $ARGV[0] eq "--timeset") && ((shift @ARGV), 1))) {
+ my($r) = timesetaccount($ARGV[0], $ARGV[1], $ARGV[2]);
+ quit();
+ exit($r);
+} elsif ($0 =~ /unbanaccount$/ || $0 =~ /unbanishaccount$/ ||
+ (($ARGV[0] eq "-uba" || $ARGV[0] eq "--unban" || $ARGV[0] eq "--unbanish") && ((shift @ARGV), 1))) {
+ my($r) = bansetaccount($ARGV[0], 0, "");
+ quit();
+ exit($r);
+} elsif ($0 =~ /unblockaccount$/ ||
+ (($ARGV[0] eq "-ubl" || $ARGV[0] eq "--unblock") && ((shift @ARGV), 1))) {
+ my($r) = changestate($ARGV[0], 0, "");
+ quit();
+ exit($r);
+} elsif ($0 =~ /whoaccount$/ ||
+ (($ARGV[0] eq "-w" || $ARGV[0] eq "--who") && ((shift @ARGV), 1))) {
+ my($r) = whoaccount($ARGV[0]);
+ quit();
+ exit($r);
+}
+
+#-------------------------------------------------------------------------
+if ($defaultlanguage eq "F") {
+ print "Lecture de la version du serveur de login...\n";
+} else {
+ print "Reading of the version of the login-server...\n";
+}
+checkloginversion();
+
+# Set the prompt line
+my($term) = new Term::ReadLine "ladmin";
+
+# Here begin the infinite loop to read prompts
+while(1) {
+ # Displaying of the prompt
+ print "\n";
+ if ($defaultlanguage eq "F") {
+ printf "\033[32mPour afficher les commandes, tapez 'Entrée'.\033[0m\n";
+ } else {
+ printf "\033[32mTo list the commands, type 'enter'.\033[0m\n";
+ }
+ my($cmd) = $term->readline("ladmin> ");
+ # split and recovery of the input
+ chomp $cmd; # remove cariage return
+ $cmd =~ s/\x1b\[\d*\w//g; # remove (esc)[(number)(1alpha) = screen control sequence
+ $cmd =~ s/[\x00-\x1f]//g; # remove control char
+ my($command, $parameters) = split /\s+/,$cmd,2; # extract command and parameters
+ $command = lc($command); # command in lowercase
+ my(@paramlist) = split /\s+/,$parameters; # get list of parameters
+
+ if ($command eq "?" || $command eq "") {
+ $command = "aide" if ($defaultlanguage eq "F");
+ $command = "help" if ($defaultlanguage ne "F");
+ }
+
+ # Analyse of the command
+ eval {
+# help
+ if ("aide" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
+ displayhelp("aide", $paramlist[0]);
+ } elsif ("help" =~ /^\Q$command/) {
+ displayhelp("help", $paramlist[0]);
+
+# general commands
+ } elsif ("add" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(.*)/)) {
+ addaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> <sex> <password>
+ } elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
+ addaccount($paramlist[0], $paramlist[1], ""); # <account_name> <sex> <password>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(.*)/)) {
+ addaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> <sex> <password>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
+ addaccount($paramlist[0], $paramlist[1], ""); # <account_name> <sex> <password>
+ } else {
+ @paramlist = split /\s+/,$parameters;
+ addaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> <sex> <password>
+ }
+
+ } elsif ($command eq "ban" || ("banish" =~ /^\Q$command/ && length($command) >= 4)) {
+ if (@paramlist = ($parameters =~ m/^(\S+)\s+(\S+)\s+"(.*)"/)) { # yyyy/mm/dd hh:mm:ss <account_name>
+ bansetaccount($paramlist[2], $paramlist[0], $paramlist[1]); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } elsif (@paramlist = ($parameters =~ m/^(\S+)\s+(\S+)\s+'(.*)'/)) { # yyyy/mm/dd hh:mm:ss <account_name>
+ bansetaccount($paramlist[2], $paramlist[0], $paramlist[1]); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } else {
+ @paramlist = split /\s+/,$parameters,3; # yyyy/mm/dd hh:mm:ss <account_name>
+ bansetaccount($paramlist[2], $paramlist[0], $paramlist[1]); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ }
+
+ } elsif (("banadd" =~ /^\Q$command/ || $command eq "ba") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
+ banaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
+ banaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
+ } else {
+ @paramlist = split /\s+/,$parameters;
+ banaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
+ }
+
+ } elsif (("banset" =~ /^\Q$command/ || $command eq "bs") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)/)) {
+ bansetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
+ bansetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)/)) {
+ bansetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
+ bansetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } else {
+ @paramlist = split /\s+/,$parameters;
+ bansetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ }
+
+ } elsif ("block" =~ /^\Q$command/ && length($command) >= 2) {
+ if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
+ changestate($paramlist[0], 5, ""); # <account_name> <new_state> <error_message_#7>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
+ changestate($paramlist[0], 5, ""); # <account_name> <new_state> <error_message_#7>
+ } else {
+ @paramlist = split /\s+/,$parameters,1;
+ changestate($paramlist[0], 5, ""); # <account_name> <new_state> <error_message_#7>
+ }
+
+ } elsif ("check" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(.*)/)) {
+ checkaccount($paramlist[0], $paramlist[1]); # <account_name> <password>
+ } elsif (@paramlist = ($parameters =~ m/^"(.*)"/)) {
+ checkaccount($paramlist[0], ""); # <account_name> <password>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(.*)/)) {
+ checkaccount($paramlist[0], $paramlist[1]); # <account_name> <password>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
+ checkaccount($paramlist[0], ""); # <account_name> <password>
+ } else {
+ @paramlist = split /\s+/,$parameters;
+ checkaccount($paramlist[0], $paramlist[1]); # <account_name> <password>
+ }
+
+ } elsif ("create" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)\s+(.*)/)) {
+ createaccount($paramlist[0], $paramlist[1], $paramlist[2], $paramlist[3]); # <account_name> <sex> <email> <password>
+ } elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)/)) {
+ createaccount($paramlist[0], $paramlist[1], $paramlist[2], ""); # <account_name> <sex> <email> <password>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)\s+(.*)/)) {
+ createaccount($paramlist[0], $paramlist[1], $paramlist[2], $paramlist[3]); # <account_name> <sex> <email> <password>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)/)) {
+ createaccount($paramlist[0], $paramlist[1], $paramlist[2], ""); # <account_name> <sex> <email> <password>
+ } else {
+ @paramlist = split /\s+/,$parameters;
+ createaccount($paramlist[0], $paramlist[1], $paramlist[2], $paramlist[3]); # <account_name> <sex> <email> <password>
+ }
+
+ } elsif ("del" =~ /^\Q$command/ || "delete" =~ /^\Q$command/) {
+ if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
+ delaccount($paramlist[0]); # <account_name>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
+ delaccount($paramlist[0]); # <account_name>
+ } else {
+ @paramlist = split /\s+/,$parameters,1;
+ delaccount($paramlist[0]); # <account_name>
+ }
+
+ } elsif ("email" =~ /^\Q$command/ && $command ne "e") { # check 1 letter command: 'email', 'end' or 'exit'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
+ changeemail($paramlist[0], $paramlist[1]); # <account_name> <email>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
+ changeemail($paramlist[0], $paramlist[1]); # <account_name> <email>
+ } else {
+ @paramlist = split /\s+/,$parameters;
+ changeemail($paramlist[0], $paramlist[1]); # <account_name> <email>
+ }
+
+ } elsif ("getcount" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
+ getlogincount();
+
+ } elsif ("gm" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
+ changegmlevel($paramlist[0], int($paramlist[1])); # <account_name> <GM_level>
+ } elsif (@paramlist = ($parameters =~ m/^"(.*)"/)) {
+ changegmlevel($paramlist[0], 0); # <account_name> <GM_level>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
+ changegmlevel($paramlist[0], int($paramlist[1])); # <account_name> <GM_level>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
+ changegmlevel($paramlist[0], 0); # <account_name> <GM_level>
+ } else {
+ @paramlist = split /\s+/,$parameters;
+ changegmlevel($paramlist[0], int($paramlist[1])); # <account_name> <GM_level>
+ }
+
+ } elsif ("id" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
+ idaccount($paramlist[0]); # <account_name>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
+ idaccount($paramlist[0]); # <account_name>
+ } else {
+ @paramlist = split /\s+/,$parameters,1;
+ idaccount($paramlist[0]); # <account_name>
+ }
+
+ } elsif ("info" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
+ infoaccount(int($paramlist[0])); # <account_id>
+
+ } elsif ($command eq "kami") { # check all letters command: 'kami' or 'kamib'?
+ @paramlist = split /\s+/,$parameters,1;
+ sendbroadcast(0, $paramlist[0]); # <type> <message>
+
+ } elsif ($command eq "kamib") { # check all letters command: 'kami' or 'kamib'?
+ @paramlist = split /\s+/,$parameters,1;
+ sendbroadcast(0x10, $paramlist[0]); # <type> <message>
+
+ } elsif ("language" =~ /^\Q$command/ && $command ne "l") { # check 1 letter command: 'list' or 'language'?
+ changelanguage($paramlist[0]); # <language>
+
+ } elsif (("list" =~ /^\Q$command/ || $command eq "ls") && $command ne "l") { # check 1 letter command: 'list' or 'language'?
+ listaccount(int($paramlist[0]), int($paramlist[1]), 0); # [start_id [end_id]] 0: to list all
+
+ } elsif (("listban" =~ /^\Q$command/ || $command eq "lsban") && $command ne "l") { # need to specificaly write Ban to have this list # check 1 letter command: 'list' or 'language'?
+ listaccount(int($paramlist[0]), int($paramlist[1]), 3); # [start_id [end_id]] 3: to list only accounts with state or banished
+
+ } elsif (("listgm" =~ /^\Q$command/ || $command eq "lsgm") && $command ne "l") { # need to specificaly write GM to have this list # check 1 letter command: 'list' or 'language'?
+ listaccount(int($paramlist[0]), int($paramlist[1]), 1); # [start_id [end_id]] 1: to list only GM
+
+ } elsif (("listok" =~ /^\Q$command/ || $command eq "lsok") && $command ne "l") { # need to specificaly write OK to have this list # check 1 letter command: 'list' or 'language'?
+ listaccount(int($paramlist[0]), int($paramlist[1]), 4); # [start_id [end_id]] 4: to list only accounts without state and not banished
+
+ } elsif ("memo" =~ /^\Q$command/) {
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(.*)/)) {
+ changememo($paramlist[0], $paramlist[1]); # <account_name> <memo>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(.*)/)) {
+ changememo($paramlist[0], $paramlist[1]); # <account_name> <memo>
+ } else {
+ @paramlist = split /\s+/,$parameters,2;
+ changememo($paramlist[0], $paramlist[1]); # <account_name> <memo>
+ }
+
+ } elsif ("name" =~ /^\Q$command/) {
+ nameaccount(int($paramlist[0])); # <account_id>
+
+ } elsif ("passwd" =~ /^\Q$command/ || "password" =~ /^\Q$command/) {
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(.*)/)) {
+ changepasswd($paramlist[0], $paramlist[1]); # <account_name> <new_password>
+ } elsif (@paramlist = ($parameters =~ m/^"(.*)"/)) {
+ changepasswd($paramlist[0], ""); # <account_name> <new_password>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(.*)/)) {
+ changepasswd($paramlist[0], $paramlist[1]); # <account_name> <new_password>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
+ changepasswd($paramlist[0], ""); # <account_name> <new_password>
+ } else {
+ @paramlist = split /\s+/,$parameters,2;
+ changepasswd($paramlist[0], $paramlist[1]); # <account_name> <new_password>
+ }
+
+ } elsif ("reloadgm" =~ /^\Q$command/) {
+ reloadGM();
+
+ } elsif ("search" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
+ $command ne "se") { # check 2 letters command: 'search' or 'sex'?
+ if (@paramlist = ($parameters =~ m/^(-{1,2}[re]\S*)\s+(.*)/)) {
+ searchaccount($paramlist[0], $paramlist[1]); # -r/-e/--expr/--regex <expression> | <expression>
+ } else {
+ @paramlist = split /\s+/,$parameters,1;
+ searchaccount($paramlist[0], ""); # -r/-e/--expr/--regex <expression> | <expression>
+ }
+
+ } elsif ("sex" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
+ $command ne "se") { # check 2 letters command: 'search' or 'sex'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
+ changesex($paramlist[0], $paramlist[1]); # <account_name> <sex>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
+ changesex($paramlist[0], $paramlist[1]); # <account_name> <sex>
+ } else {
+ @paramlist = split /\s+/,$parameters;
+ changesex($paramlist[0], $paramlist[1]); # <account_name> <sex>
+ }
+
+ } elsif ("state" =~ /^\Q$command/ && $command ne "s") { # check 1 letter command: 'search', 'state' or 'sex'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\d+)\s+(.*)/)) {
+ changestate($paramlist[0], int($paramlist[1]), $paramlist[2]); # <account_name> <new_state> <error_message_#7>
+ } elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\d+)/)) {
+ changestate($paramlist[0], int($paramlist[1]), ""); # <account_name> <new_state> <error_message_#7>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\d+)\s+(.*)/)) {
+ changestate($paramlist[0], int($paramlist[1]), $paramlist[2]); # <account_name> <new_state> <error_message_#7>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\d+)/)) {
+ changestate($paramlist[0], int($paramlist[1]), ""); # <account_name> <new_state> <error_message_#7>
+ } else {
+ @paramlist = split /\s+/,$parameters,3;
+ changestate($paramlist[0], int($paramlist[1]), $paramlist[2]); # <account_name> <new_state> <error_message_#7>
+ }
+
+ } elsif (("timeadd" =~ /^\Q$command/ || $command eq "ta") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
+ timeaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
+ timeaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
+ } else {
+ @paramlist = split /\s+/,$parameters;
+ timeaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
+ }
+
+ } elsif (("timeset" =~ /^\Q$command/ || $command eq "ts") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
+ if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)/)) {
+ timesetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
+ timesetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)/)) {
+ timesetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
+ timesetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } else {
+ @paramlist = split /\s+/,$parameters;
+ timesetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ }
+
+ } elsif ($command eq "unban" || ("unbanish" =~ /^\Q$command/ && length($command) >= 4)) {
+ if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
+ bansetaccount($paramlist[0], 0, ""); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
+ bansetaccount($paramlist[0], 0, ""); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ } else {
+ @paramlist = split /\s+/,$parameters,1;
+ bansetaccount($paramlist[0], 0, ""); # <account_name> yyyy/mm/dd [hh:mm:ss]
+ }
+
+ } elsif ("unblock" =~ /^\Q$command/ && length($command) >= 4) {
+ if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
+ changestate($paramlist[0], 0, ""); # <account_name> <new_state> <error_message_#7>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
+ changestate($paramlist[0], 0, ""); # <account_name> <new_state> <error_message_#7>
+ } else {
+ @paramlist = split /\s+/,$parameters,1;
+ changestate($paramlist[0], 0, ""); # <account_name> <new_state> <error_message_#7>
+ }
+
+ } elsif ("version" =~ /^\Q$command/) {
+ checkloginversion();
+
+ } elsif ("who" =~ /^\Q$command/) {
+ if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
+ whoaccount($paramlist[0]); # <account_name>
+ } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
+ whoaccount($paramlist[0]); # <account_name>
+ } else {
+ @paramlist = split /\s+/,$parameters,1;
+ whoaccount($paramlist[0]); # <account_name>
+ }
+
+# quit
+ } elsif ("quit" =~ /^\Q$command/ ||
+ (("end" =~ /^\Q$command/ || "exit" =~ /^\Q$command/) && $command ne "e")) { # check 1 letter command: 'email', 'end' or 'exit'?
+ last;
+
+# unknown command
+ } elsif ($command) {
+ if ($defaultlanguage eq "F") {
+ print "Commande inconnue [".$command."]\n";
+ } else {
+ print "Unknown command [".$command."]\n";
+ }
+ }
+# $term->addhistory($cmd) if $command;
+ };
+ if ($@) {
+ if ($defaultlanguage eq "F") {
+ print "Erreur [".$command."]\n$@";
+ } else {
+ print "Error [".$command."]\n$@";
+ }
+ }
+};
+
+# End of the software
+quit();
+
+if ($defaultlanguage eq "F") {
+ print "Au revoir.\n";
+} else {
+ print "Bye.\n";
+}
+exit(0);
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Displaying of the version of the login-server
+sub checkloginversion() {
+ print $so pack("v",30000); # 0x7530
+ $so->flush();
+ $buf = readso(10);
+ # Analyse du Packet
+ my($ret, $maver, $miver, $rev, $dev, $mod, $type, $mdver) = unpack("vc6v", $buf);
+ if ($ret != 30001) { #0x7531
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ exit(6);
+ }
+
+ print " Login-Server [$loginserverip:$loginserverport]\n";
+ printf " eAthena version %s-%d.%d", ("stable", "dev")[$dev], $maver, $miver;
+ printf " revision %d", $rev if $rev;
+ printf "%s%d.\n", ("", "-mod")[$mod], $mdver;
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Displaying of the help
+sub displayhelp() {
+ my($help, $receivedcommand) = @_;
+
+ my($command) = lc($receivedcommand); # command in lowercase
+
+ if ($command eq "") {
+ $command = "not a command"; # any value that is not a command
+ }
+
+ if ($command eq "?") {
+ $command = "aide" if ($defaultlanguage eq "F");
+ $command = "help" if ($defaultlanguage ne "F");
+ }
+
+ if ($help eq "aide") {
+ if ("aide" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
+ printf "aide/help/?\n";
+ printf " Affiche la description des commandes\n";
+ printf "aide/help/? [commande]\n";
+ printf " Affiche la description de la commande specifiée\n";
+ } elsif ("help" =~ /^\Q$command/) {
+ printf "aide/help/?\n";
+ printf " Display the description of the commands\n";
+ printf "aide/help/? [command]\n";
+ printf " Display the description of the specified command\n";
+ } elsif ("add" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
+ printf "add <nomcompte> <sexe> <motdepasse>\n";
+ printf " Crée un compte avec l'email par défaut (a\@a.com).\n";
+ printf " Concernant le sexe, seule la première lettre compte (F ou M).\n";
+ printf " L'e-mail est a\@a.com (e-mail par défaut). C'est comme n'avoir aucun e-mail.\n";
+ printf " Lorsque motdepasse est omis, la saisie se fait sans que la frappe se voit.\n";
+ printf " <exemple> add testname Male testpass\n";
+ } elsif ($command eq "ban" || ("banish" =~ /^\Q$command/ && length($command) >= 4)) {
+ printf "ban/banish aaaa/mm/jj hh:mm:ss <nomcompte>\n";
+ printf " Change la date de fin de bannissement d'un compte.\n";
+ printf " La différence avec banset est la position du nom du compte.\n";
+ } elsif (("banadd" =~ /^\Q$command/ || $command eq "ba") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
+ printf "banadd <nomcompte> <Modificateur>\n";
+ printf " Ajoute ou soustrait du temps à la date de banissement d'un compte.\n";
+ printf " Les modificateurs sont construits comme suit:\n";
+ printf " Valeur d'ajustement (-1, 1, +1, etc...)\n";
+ printf " Elément modifié:\n";
+ printf " a ou y: année\n";
+ printf " m: mois\n";
+ printf " j ou d: jour\n";
+ printf " h: heure\n";
+ printf " mn: minute\n";
+ printf " s: seconde\n";
+ printf " <exemple> banadd testname +1m-2mn1s-6a\n";
+ printf " Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n";
+ printf " et 6 ans dans le même temps.\n";
+ printf "NOTE: Si vous modifez la date de banissement d'un compte non bani,\n";
+ printf " vous indiquez comme date (le moment actuel +- les ajustements)\n";
+ } elsif (("banset" =~ /^\Q$command/ || $command eq "bs") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
+ printf "banset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n";
+ printf " Change la date de fin de bannissement d'un compte.\n";
+ printf " Heure par défaut: 23:59:59\n";
+ printf "banset <nomcompte> 0\n";
+ printf " Débanni un compte (0 = de-banni).\n";
+ } elsif ("block" =~ /^\Q$command/ && length($command) >= 2) {
+ printf "block <nom compte>\n";
+ printf " Place le status d'un compte à 5 (You have been blocked by the GM Team).\n";
+ printf " La commande est l'équivalent de state <nom_compte> 5.\n";
+ } elsif ("check" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
+ printf "check <nomcompte> <motdepasse>\n";
+ printf " Vérifie la validité d'un mot de passe pour un compte\n";
+ printf " NOTE: Le serveur n'enverra jamais un mot de passe.\n";
+ printf " C'est la seule méthode que vous possédez pour savoir\n";
+ printf " si un mot de passe est le bon. L'autre méthode est\n";
+ printf " d'avoir un accès ('physique') au fichier des comptes.\n";
+ } elsif ("create" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
+ printf "create <nomcompte> <sexe> <email> <motdepasse>\n";
+ printf " Comme la commande add, mais avec l'e-mail en plus.\n";
+ printf " <exemple> create testname Male mon\@mail.com testpass\n";
+ } elsif ("del" =~ /^\Q$command/ || "delete" =~ /^\Q$command/) {
+ printf "del <nomcompte>\n";
+ printf " Supprime un compte.\n";
+ printf " La commande demande confirmation. Après confirmation, le compte est détruit.\n";
+ } elsif ("email" =~ /^\Q$command/ && $command ne "e") { # check 1 letter command: 'email', 'end' or 'exit'?
+ printf "email <nomcompte> <email>\n";
+ printf " Modifie l'e-mail d'un compte.\n";
+ } elsif ("getcount" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
+ printf "getcount\n";
+ printf " Donne le nombre de joueurs en ligne par serveur de char.\n";
+ } elsif ("gm" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
+ printf "gm <nomcompte> [Niveau_GM]\n";
+ printf " Modifie le niveau de GM d'un compte.\n";
+ printf " Valeur par défaut: 0 (suppression du niveau de GM).\n";
+ printf " <exemple> gm nomtest 80\n";
+ } elsif ("id" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
+ printf "id <nomcompte>\n";
+ printf " Donne l'id d'un compte.\n";
+ } elsif ("info" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
+ printf "info <idcompte>\n";
+ printf " Affiche les informations sur un compte.\n";
+ } elsif ($command eq "kami") { # check all letters command: 'kami' or 'kamib'?
+ printf "kami <message>\n";
+ printf " Envoi un message général sur tous les serveurs de map (en jaune).\n";
+ } elsif ($command eq "kamib") { # check all letters command: 'kami' or 'kamib'?
+ printf "kamib <message>\n";
+ printf " Envoi un message général sur tous les serveurs de map (en bleu).\n";
+ } elsif ("language" =~ /^\Q$command/ && $command ne "l") { # check 1 letter command: 'list' or 'language'?
+ printf("language <langue>\n");
+ printf(" Change la langue d'affichage.\n");
+ printf(" Langues possibles: 'Français' ou 'English'.\n");
+ } elsif (("list" =~ /^\Q$command/ || $command eq "ls") && $command ne "l") { # check 1 letter command: 'list' or 'language'?
+ printf "list/ls [Premier_id [Dernier_id]]\n";
+ printf " Affiche une liste de comptes.\n";
+ printf " 'Premier_id', 'Dernier_id': indique les identifiants de départ et de fin.\n";
+ printf " La recherche par nom n'est pas possible avec cette commande.\n";
+ printf " <example> list 10 9999999\n";
+ } elsif (("listban" =~ /^\Q$command/ || $command eq "lsban") && $command ne "l") { # need to specificaly write Ban to have this list # check 1 letter command: 'list' or 'language'?
+ printf "listBan/lsBan [Premier_id [Dernier_id]]\n";
+ printf " Comme list/ls, mais seulement pour les comptes GM avec un statut ou bannis.\n";
+ } elsif (("listgm" =~ /^\Q$command/ || $command eq "lsgm") && $command ne "l") { # need to specificaly write GM to have this list # check 1 letter command: 'list' or 'language'?
+ printf "listGM/lsGM [Premier_id [Dernier_id]]\n";
+ printf " Comme list/ls, mais seulement pour les comptes GM.\n";
+ } elsif (("listok" =~ /^\Q$command/ || $command eq "lsok") && $command ne "l") { # need to specificaly write OK to have this list # check 1 letter command: 'list' or 'language'?
+ printf "listOK/lsOK [Premier_id [Dernier_id]]\n";
+ printf " Comme list/ls, mais seulement pour les comptes sans statut et non bannis.\n";
+ } elsif ("memo" =~ /^\Q$command/) {
+ printf "memo <nomcompte> <memo>\n";
+ printf " Modifie le mémo d'un compte.\n";
+ printf " 'memo': Il peut avoir jusqu'à 253 caractères (avec des espaces ou non).\n";
+ } elsif ("name" =~ /^\Q$command/) {
+ printf "name <idcompte>\n";
+ printf " Donne le nom d'un compte.\n";
+ } elsif ("passwd" =~ /^\Q$command/ || "password" =~ /^\Q$command/) {
+ printf "passwd <nomcompte> <nouveaumotdepasse>\n";
+ printf " Change le mot de passe d'un compte.\n";
+ printf " Lorsque nouveaumotdepasse est omis,\n";
+ printf " la saisie se fait sans que la frappe ne se voit.\n";
+ } elsif ("reloadgm" =~ /^\Q$command/) {
+ printf "reloadGM\n";
+ printf " Reload GM configuration file\n";
+ } elsif ("search" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
+ $command ne "se") { # check 2 letters command: 'search' or 'sex'?
+ printf "search <expression>\n";
+ printf " Cherche des comptes.\n";
+ printf " Affiche les comptes dont les noms correspondent.\n";
+ printf "search -r/-e/--expr/--regex <expression>\n";
+ printf " Cherche des comptes par expression regulière.\n";
+ printf " Affiche les comptes dont les noms correspondent.\n";
+ } elsif ("sex" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
+ $command ne "se") { # check 2 letters command: 'search' or 'sex'?
+ printf "sex <nomcompte> <sexe>\n";
+ printf " Modifie le sexe d'un compte.\n";
+ printf " <exemple> sex testname Male\n";
+ } elsif ("state" =~ /^\Q$command/ && $command ne "s") { # check 1 letter command: 'search', 'state' or 'sex'?
+ printf "state <nomcompte> <nouveaustatut> <message_erreur_7>\n";
+ printf " Change le statut d'un compte.\n";
+ printf " 'nouveaustatut': Le statut est le même que celui du packet 0x006a + 1.\n";
+ printf " les possibilités sont:\n";
+ printf " 0 = Compte ok\n";
+ printf " 1 = Unregistered ID\n";
+ printf " 2 = Incorrect Password\n";
+ printf " 3 = This ID is expired\n";
+ printf " 4 = Rejected from Server\n";
+ printf " 5 = You have been blocked by the GM Team\n";
+ printf " 6 = Your Game's EXE file is not the latest version\n";
+ printf " 7 = You are Prohibited to log in until...\n";
+ printf " 8 = Server is jammed due to over populated\n";
+ printf " 9 = No MSG\n";
+ printf " 100 = This ID has been totally erased\n";
+ printf " all other values are 'No MSG', then use state 9 please.\n";
+ printf " 'message_erreur_7': message du code erreur 6 =\n";
+ printf " = Your are Prohibited to log in until... (packet 0x006a)\n";
+ } elsif (("timeadd" =~ /^\Q$command/ || $command eq "ta") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
+ printf "timeadd <nomcompte> <modificateur>\n";
+ printf " Ajoute/soustrait du temps à la limite de validité d'un compte.\n";
+ printf " Le modificateur est composé comme suit:\n";
+ printf " Valeur modificatrice (-1, 1, +1, etc...)\n";
+ printf " Elément modifié:\n";
+ printf " a ou y: année\n";
+ printf " m: mois\n";
+ printf " j ou d: jour\n";
+ printf " h: heure\n";
+ printf " mn: minute\n";
+ printf " s: seconde\n";
+ printf " <exemple> timeadd testname +1m-2mn1s-6a\n";
+ printf " Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n";
+ printf " et 6 ans dans le même temps.\n";
+ printf "NOTE: Vous ne pouvez pas modifier une limite de validité illimitée. Si vous\n";
+ printf " désirez le faire, c'est que vous voulez probablement créer un limite de\n";
+ printf " validité limitée. Donc, en premier, fixé une limite de valitidé.\n";
+ } elsif (("timeset" =~ /^\Q$command/ || $command eq "ts") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
+ printf "timeset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n";
+ printf " Change la limite de validité d'un compte.\n";
+ printf " Heure par défaut: 23:59:59\n";
+ printf "timeset <nomcompte> 0\n";
+ printf " Donne une limite de validité illimitée (0 = illimitée).\n";
+ } elsif ($command eq "unban" || ("unbanish" =~ /^\Q$command/ && length($command) >= 4)) {
+ printf "unban/unbanish <nom compte>\n";
+ printf " Ote le banissement d'un compte.\n";
+ printf " La commande est l'équivalent de banset <nom_compte> 0.\n";
+ } elsif ("unblock" =~ /^\Q$command/ && length($command) >= 4) {
+ printf "unblock <nom compte>\n";
+ printf " Place le status d'un compte à 0 (Compte ok).\n";
+ printf " La commande est l'équivalent de state <nom_compte> 0.\n";
+ } elsif ("version" =~ /^\Q$command/) {
+ printf "version\n";
+ printf " Affiche la version du login-serveur.\n";
+ } elsif ("who" =~ /^\Q$command/) {
+ printf "who <nomcompte>\n";
+ printf " Affiche les informations sur un compte.\n";
+ } elsif ("quit" =~ /^\Q$command/ ||
+ (("end" =~ /^\Q$command/ || "exit" =~ /^\Q$command/) && $command ne "e")) { # check 1 letter command: 'email', 'end' or 'exit'?\n";
+ printf "quit/end/exit\n";
+ printf " Fin du programme d'administration.\n";
+ } else {
+ if ($receivedcommand ne "") {
+ printf "Commande inconnue [%s] pour l'aide. Affichage de toutes les commandes.\n", $receivedcommand;
+ }
+ print << "ENDOFAIDE";
+ aide/help/? -- Affiche cet aide
+ aide/help/? [commande] -- Affiche l'aide de la commande
+ add <nomcompte> <sexe> <motdepasse> -- Crée un compte (sans email)
+ ban/banish aaaa/mm/jj hh:mm:ss <nomcompte>-- Change la date finale de banismnt
+ banadd/ba <nomcompte> <modificateur> -- Ajout/soustrait du temps à la
+ exemple: ba moncompte +1m-2mn1s-2y date finale de banissement
+ banset/bs <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la date fin de banisemnt
+ banset/bs <nomcompte> 0 -- Dé-banis un compte.
+ block <nom compte> -- Mets le status d'un compte à 5 (blocked by the GM Team)
+ check <nomcompte> <motdepasse> -- Vérifie un mot de passe d'un compte
+ create <nomcompte> <sexe> <email> <motdepasse> -- Crée un compte (avec email)
+ del <nomcompte> -- Supprime un compte
+ email <nomcompte> <email> -- Modifie l'e-mail d'un compte
+ getcount -- Donne le nb de joueurs en ligne
+ gm <nomcompte> [Niveau_GM] -- Modifie le niveau de GM d'un compte
+ id <nomcompte> -- Donne l'id d'un compte
+ info <idcompte> -- Affiche les infos sur un compte
+ kami <message> -- Envoi un message général (en jaune)
+ kamib <message> -- Envoi un message général (en bleu)
+ language <langue> -- Change la langue d'affichage.
+ list/ls [Premier_id [Dernier_id] ] -- Affiche une liste de comptes
+ listBan/lsBan [Premier_id [Dernier_id] ]-- Affiche une liste de comptes
+ avec un statut ou bannis
+ listGM/lsGM [Premier_id [Dernier_id] ] -- Affiche une liste de comptes GM
+ listOK/lsOK [Premier_id [Dernier_id] ] -- Affiche une liste de comptes
+ sans status et non bannis
+ memo <nomcompte> <memo> -- Modifie le memo d'un compte
+ name <idcompte> -- Donne le nom d'un compte
+ passwd <nomcompte> <nouveaumotdepasse> -- Change le mot de passe d'un compte
+ quit/end/exit -- Fin du programme d'administation
+ reloadGM -- Recharger le fichier de config des GM
+ search <expression> -- Cherche des comptes
+ search -e/-r/--expr/--regex <expression> -- Cherche des comptes par REGEX
+ sex <nomcompte> <sexe> -- Modifie le sexe d'un compte
+ state <nomcompte> <nouveaustatut> <messageerr7> -- Change le statut d'1 compte
+ timeadd/ta <nomcompte> <modificateur> -- Ajout/soustrait du temps à la
+ exemple: ta moncompte +1m-2mn1s-2y limite de validité
+ timeset/ts <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la limite de validité
+ timeset/ts <nomcompte> 0 -- limite de validité = illimitée
+ unban/unbanish <nom compte> -- Ote le banissement d'un compte
+ unblock <nom compte> -- Mets le status d'un compte à 0 (Compte ok)
+ version -- Donne la version du login-serveur
+ who <nomcompte> -- Affiche les infos sur un compte
+ENDOFAIDE
+ printf(" Note: Pour les noms de compte avec des espaces, tapez \"<nom compte>\" (ou ').\n");
+ }
+ } else {
+ if ("aide" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
+ printf "aide/help/?\n";
+ printf " Display the description of the commands\n";
+ printf "aide/help/? [command]\n";
+ printf " Display the description of the specified command\n";
+ } elsif ("help" =~ /^\Q$command/) {
+ printf "aide/help/?\n";
+ printf " Display the description of the commands\n";
+ printf "aide/help/? [command]\n";
+ printf " Display the description of the specified command\n";
+ } elsif ("add" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
+ printf "add <account_name> <sex> <password>\n";
+ printf " Create an account with the default email (a\@a.com).\n";
+ printf " Concerning the sex, only the first letter is used (F or M).\n";
+ printf " The e-mail is set to a\@a.com (default e-mail). It's like to have no e-mail.\n";
+ printf " When the password is omitted,\n";
+ printf " the input is done without displaying of the pressed keys.\n";
+ printf " <example> add testname Male testpass\n";
+ } elsif ($command eq "ban" || ("banish" =~ /^\Q$command/ && length($command) >= 4)) {
+ printf "ban/banish yyyy/mm/dd hh:mm:ss <account_name>\n";
+ printf " Changes the final date of a banishment of an account.\n";
+ printf " The difference with banset is the position of the account name.\n";
+ } elsif (("banadd" =~ /^\Q$command/ || $command eq "ba") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
+ printf "banadd <account_name> <modifier>\n";
+ printf " Adds or substracts time from the final date of a banishment of an account.\n";
+ printf " Modifier is done as follows:\n";
+ printf " Adjustment value (-1, 1, +1, etc...)\n";
+ printf " Modified element:\n";
+ printf " a or y: year\n";
+ printf " m: month\n";
+ printf " j or d: day\n";
+ printf " h: hour\n";
+ printf " mn: minute\n";
+ printf " s: second\n";
+ printf " <example> banadd testname +1m-2mn1s-6y\n";
+ printf " this example adds 1 month and 1 second, and substracts 2 minutes\n";
+ printf " and 6 years at the same time.\n";
+ printf "NOTE: If you modify the final date of a non-banished account,\n";
+ printf " you fix the final date to (actual time +- adjustments)\n";
+ } elsif (("banset" =~ /^\Q$command/ || $command eq "bs") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
+ printf "banset <account_name> yyyy/mm/dd [hh:mm:ss]\n";
+ printf " Changes the final date of a banishment of an account.\n";
+ printf " Default time: 23:59:59\n";
+ printf "banset <account_name> 0\n";
+ printf " Set a non-banished account (0 = unbanished).\n";
+ } elsif ("block" =~ /^\Q$command/ && length($command) >= 2) {
+ printf "block <account name>\n";
+ printf " Set state 5 (You have been blocked by the GM Team) to an account.\n";
+ printf " Same command of state <account_name> 5.\n";
+ } elsif ("check" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
+ printf "check <account_name> <password>\n";
+ printf " Check the validity of a password for an account.\n";
+ printf " NOTE: Server will never sends back a password.\n";
+ printf " It's the only method you have to know if a password is correct.\n";
+ printf " The other method is to have a ('physical') access to the accounts file.\n";
+ } elsif ("create" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
+ printf "create <account_name> <sex> <email> <password>\n";
+ printf " Like the 'add' command, but with e-mail moreover.\n";
+ printf " <example> create testname Male my\@mail.com testpass\n";
+ } elsif ("del" =~ /^\Q$command/ || "delete" =~ /^\Q$command/) {
+ printf "del <account_name>\n";
+ printf " Remove an account.\n";
+ printf " This order requires confirmation. After confirmation, the account is deleted.\n";
+ } elsif ("email" =~ /^\Q$command/ && $command ne "e") { # check 1 letter command: 'email', 'end' or 'exit'?
+ printf "email <account_name> <email>\n";
+ printf " Modify the e-mail of an account.\n";
+ } elsif ("getcount" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
+ printf "getcount\n";
+ printf " Give the number of players online on all char-servers.\n";
+ } elsif ("gm" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
+ printf "gm <account_name> [GM_level]\n";
+ printf " Modify the GM level of an account.\n";
+ printf " Default value remove GM level (GM level = 0).\n";
+ printf " <example> gm testname 80\n";
+ } elsif ("id" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
+ printf "id <account_name>\n";
+ printf " Give the id of an account.\n";
+ } elsif ("info" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
+ printf "info <account_id>\n";
+ printf " Display complete information of an account.\n";
+ } elsif ($command eq "kami") { # check all letters command: 'kami' or 'kamib'?
+ printf "kami <message>\n";
+ printf " Sends a broadcast message on all map-server (in yellow).\n";
+ } elsif ($command eq "kamib") { # check all letters command: 'kami' or 'kamib'?
+ printf "kamib <message>\n";
+ printf " Sends a broadcast message on all map-server (in blue).\n";
+ } elsif ("language" =~ /^\Q$command/ && $command ne "l") { # check 1 letter command: 'list' or 'language'?
+ printf("language <language>\n");
+ printf(" Change the language of displaying.\n");
+ printf(" Possible languages: Français or English.\n");
+ } elsif (("list" =~ /^\Q$command/ || $command eq "ls") && $command ne "l") { # check 1 letter command: 'list' or 'language'?
+ printf "list/ls [start_id [end_id]]\n";
+ printf " Display a list of accounts.\n";
+ printf " 'start_id', 'end_id': indicate end and start identifiers.\n";
+ printf " Research by name is not possible with this command.\n";
+ printf " <example> list 10 9999999\n";
+ } elsif (("listban" =~ /^\Q$command/ || $command eq "lsban") && $command ne "l") { # need to specificaly write Ban to have this list # check 1 letter command: 'list' or 'language'?
+ printf "listBan/lsBan [start_id [end_id]]\n";
+ printf " Like list/ls, but only for accounts with state or banished.\n";
+ } elsif (("listgm" =~ /^\Q$command/ || $command eq "lsgm") && $command ne "l") { # need to specificaly write GM to have this list # check 1 letter command: 'list' or 'language'?
+ printf "listGM/lsGM [start_id [end_id]]\n";
+ printf " Like list/ls, but only for GM accounts.\n";
+ } elsif (("listok" =~ /^\Q$command/ || $command eq "lsok") && $command ne "l") { # need to specificaly write OK to have this list # check 1 letter command: 'list' or 'language'?
+ printf "listOK/lsOK [start_id [end_id]]\n";
+ printf " Like list/ls, but only for accounts without state and not banished.\n";
+ } elsif ("memo" =~ /^\Q$command/) {
+ printf "memo <account_name> <memo>\n";
+ printf " Modify the memo of an account.\n";
+ printf " 'memo': it can have until 253 characters (with spaces or not).\n";
+ } elsif ("name" =~ /^\Q$command/) {
+ printf "name <account_id>\n";
+ printf " Give the name of an account.\n";
+ } elsif ("passwd" =~ /^\Q$command/ || "password" =~ /^\Q$command/) {
+ printf "passwd <account_name> <new_password>\n";
+ printf " Change the password of an account.\n";
+ printf " When new password is omitted,\n";
+ printf " the input is done without displaying of the pressed keys.\n";
+ } elsif ("reloadgm" =~ /^\Q$command/) {
+ printf "reloadGM\n";
+ printf " Reload GM configuration file\n";
+ } elsif ("search" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
+ $command ne "se") { # check 2 letters command: 'search' or 'sex'?
+ printf "search <expression>\n";
+ printf " Seek accounts.\n";
+ printf " Displays the accounts whose names correspond.\n";
+ printf "search -r/-e/--expr/--regex <expression>\n";
+ printf " Seek accounts by regular expression.\n";
+ printf " Displays the accounts whose names correspond.\n";
+ } elsif ("sex" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
+ $command ne "se") { # check 2 letters command: 'search' or 'sex'?
+ printf "sex <account_name> <sex>\n";
+ printf " Modify the sex of an account.\n";
+ printf " <example> sex testname Male\n";
+ } elsif ("state" =~ /^\Q$command/ && $command ne "s") { # check 1 letter command: 'search', 'state' or 'sex'?
+ printf "state <account_name> <new_state> <error_message_#7>\n";
+ printf " Change the state of an account.\n";
+ printf " 'new_state': state is the state of the packet 0x006a + 1.\n";
+ printf " The possibilities are:\n";
+ printf " 0 = Account ok\n";
+ printf " 1 = Unregistered ID\n";
+ printf " 2 = Incorrect Password\n";
+ printf " 3 = This ID is expired\n";
+ printf " 4 = Rejected from Server\n";
+ printf " 5 = You have been blocked by the GM Team\n";
+ printf " 6 = Your Game's EXE file is not the latest version\n";
+ printf " 7 = You are Prohibited to log in until...\n";
+ printf " 8 = Server is jammed due to over populated\n";
+ printf " 9 = No MSG\n";
+ printf " 100 = This ID has been totally erased\n";
+ printf " all other values are 'No MSG', then use state 9 please.\n";
+ printf " 'error_message_#7': message of the code error 6\n";
+ printf " = Your are Prohibited to log in until... (packet 0x006a)\n";
+ } elsif (("timeadd" =~ /^\Q$command/ || $command eq "ta") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
+ printf "timeadd <account_name> <modifier>\n";
+ printf " Adds or substracts time from the validity limit of an account.\n";
+ printf " Modifier is done as follows:\n";
+ printf " Adjustment value (-1, 1, +1, etc...)\n";
+ printf " Modified element:\n";
+ printf " a or y: year\n";
+ printf " m: month\n";
+ printf " j or d: day\n";
+ printf " h: hour\n";
+ printf " mn: minute\n";
+ printf " s: second\n";
+ printf " <example> timeadd testname +1m-2mn1s-6y\n";
+ printf " this example adds 1 month and 1 second, and substracts 2 minutes\n";
+ printf " and 6 years at the same time.\n";
+ printf "NOTE: You can not modify a unlimited validity limit.\n";
+ printf " If you want modify it, you want probably create a limited validity limit.\n";
+ printf " So, at first, you must set the validity limit to a date/time.\n";
+ } elsif (("timeset" =~ /^\Q$command/ || $command eq "ts") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
+ printf "timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n";
+ printf " Changes the validity limit of an account.\n";
+ printf " Default time: 23:59:59\n";
+ printf "timeset <account_name> 0\n";
+ printf " Gives an unlimited validity limit (0 = unlimited).\n";
+ } elsif ($command eq "unban" || ("unbanish" =~ /^\Q$command/ && length($command) >= 4)) {
+ printf "unban/unbanish <account name>\n";
+ printf " Remove the banishment of an account.\n";
+ printf " This command works like banset <account_name> 0.\n";
+ } elsif ("unblock" =~ /^\Q$command/ && length($command) >= 4) {
+ printf "unblock <account name>\n";
+ printf " Set state 0 (Account ok) to an account.\n";
+ printf " This command works like state <account_name> 0.\n";
+ } elsif ("version" =~ /^\Q$command/) {
+ printf "version\n";
+ printf " Display the version of the login-server.\n";
+ } elsif ("who" =~ /^\Q$command/) {
+ printf "who <account_name>\n";
+ printf " Displays complete information of an account.\n";
+ } elsif ("quit" =~ /^\Q$command/ ||
+ (("end" =~ /^\Q$command/ || "exit" =~ /^\Q$command/) && $command ne "e")) { # check 1 letter command: 'email', 'end' or 'exit'?\n";
+ printf "quit/end/exit\n";
+ printf " End of the program of administration.\n";
+ } else {
+ if ($receivedcommand ne "") {
+ printf "Unknown command [%s] for help. Displaying of all commands.\n", $receivedcommand;
+ }
+ print << "ENDOFHELP";
+ aide/help/? -- Display this help
+ aide/help/? [command] -- Display the help of the command
+ add <account_name> <sex> <password> -- Create an account with default email
+ ban/banish yyyy/mm/dd hh:mm:ss <account_name> -- Change final date of a ban
+ banadd/ba <account_name> <modifier> -- Add or substract time from the final
+ example: ba apple +1m-2mn1s-2y date of a banishment of an account
+ banset/bs <account_name> yyyy/mm/dd [hh:mm:ss] -- Change final date of a ban
+ banset/bs <account_name> 0 -- Un-banish an account
+ block <account name> -- Set state 5 (blocked by the GM Team) to an account
+ check <account_name> <password> -- Check the validity of a password
+ create <account_name> <sex> <email> <passwrd> -- Create an account with email
+ del <account_name> -- Remove an account
+ email <account_name> <email> -- Modify an email of an account
+ getcount -- Give the number of players online
+ gm <account_name> [GM_level] -- Modify the GM level of an account
+ id <account_name> -- Give the id of an account
+ info <account_id> -- Display all information of an account
+ kami <message> -- Sends a broadcast message (in yellow)
+ kamib <message> -- Sends a broadcast message (in blue)
+ language <language> -- Change the language of displaying.
+ list/ls [First_id [Last_id]] -- Display a list of accounts
+ listBan/lsBan [First_id [Last_id]] -- Display a list of accounts
+ with state or banished
+ listGM/lsGM [First_id [Last_id]] -- Display a list of GM accounts
+ listOK/lsOK [First_id [Last_id]] -- Display a list of accounts
+ without state and not banished
+ memo <account_name> <memo> -- Modify the memo of an account
+ name <account_id> -- Give the name of an account
+ passwd <account_name> <new_password> -- Change the password of an account
+ quit/end/exit -- End of the program of administation
+ reloadGM -- Reload GM configuration file
+ search <expression> -- Seek accounts
+ search -e/-r/--expr/--regex <expressn> -- Seek accounts by regular-expression
+ sex <nomcompte> <sexe> -- Modify the sex of an account
+ state <account_name> <new_state> <error_message_#7> -- Change the state
+ timeadd/ta <account_name> <modifier> -- Add or substract time from the
+ example: ta apple +1m-2mn1s-2y validity limit of an account
+ timeset/ts <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit
+ timeset/ts <account_name> 0 -- Give a unlimited validity limit
+ unban/unbanish <account name> -- Remove the banishment of an account
+ unblock <account name> -- Set state 0 (Account ok) to an account
+ version -- Gives the version of the login-server
+ who <account_name> -- Display all information of an account
+ENDOFHELP
+ printf(" Note: To use spaces in an account name, type \"<account name>\" (or ').\n");
+ }
+ }
+
+ return 0;
+}
+#--------------------------------------------------------------------------
+
+# Sub-function: Displaying of the accounts list
+sub listaccount() {
+ my($st, $ed, $listflag) = @_;
+ my($i);
+ my($n) = (0);
+ # 0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567
+ if ($defaultlanguage eq "F") {
+ print " id_compte GM nom_utilisateur sexe count statut\n";
+ } else {
+ print "account_id GM user_name sex count state\n";
+ }
+ print "-------------------------------------------------------------------------------\n";
+ while(1) {
+ print $so pack("vV2", 0x7920, $st, $ed);
+ $so->flush();
+ $buf = readso(4);
+ if (unpack("v", $buf) != 0x7921) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ exit(10);
+ }
+ my($len) = unpack("x2v", $buf);
+ last if ($len <= 4);
+ for($i = 4; $i < $len; $i += 38) {
+ my(@dat) = unpack("VCa24cVV", readso(38));
+ $st = $dat[0] + 1;
+ if ($listflag == 0 ||
+ ($listflag == 1 && $dat[1] > 0) || # check GM flag
+ ($listflag == 3 && $dat[5] != 0) || # check with state or banished
+ ($listflag == 4 && $dat[5] == 0)) { # check without state and not banished
+ printf "%10d %2s %-24s%-5s %6d %-27s\n", $dat[0],
+ ($dat[1] == 0 ? " " : $dat[1]),
+ $dat[2],
+ ($defaultlanguage eq "F" ? ("Femme","Male","Servr")[$dat[3]] : ("Femal","Male","Servr")[$dat[3]]),
+ $dat[4],
+ (($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"),
+ "Unregistered ID",
+ "Incorrect Password",
+ "This ID is expired",
+ "Rejected from Server",
+ "Blocked by the GM Team", # You have been blocked by the GM Team
+ "Your EXE file is too old", # Your Game's EXE file is not the latest version
+ "Banishement or\n Prohibited to login until %s", # You are Prohibited to log in until %s
+ "Server is over populated", # Server is jammed due to over populated
+ "No MSG",
+ "This ID is totally erased")[$dat[5] == 100 ? 10 : $dat[5]]; # This ID has been totally erased
+ $n++;
+ }
+ }
+ }
+ if ($defaultlanguage eq "F") {
+ if ($n == 0) {
+ print "Aucun compte trouvé.\n";
+ } elsif ($n == 1) {
+ print "1 compte trouvé.\n";
+ } else {
+ print "$n comptes trouvés.\n";
+ }
+ } else {
+ if ($n == 0) {
+ print "No account found.\n";
+ } elsif ($n == 1) {
+ print "1 account found.\n";
+ } else {
+ print "$n accounts found.\n";
+ }
+ }
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: add an account with the default e-mail
+sub addaccount() {
+ my($userid, $sex, $passwd) = @_;
+ if ($userid eq "" || !defined($userid)) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple> add nomtest Male motdepassetest\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example> add testname Male testpass\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+# if ($userid =~ /[^A-Za-z0-9\@-_]/) {
+# if ($defaultlanguage eq "F") {
+# print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n";
+# } else {
+# print "Illegal character found in the account name ".$`."[${&}]${'}\n";
+# }
+# return 101;
+# }
+ $sex = uc(substr($sex, 0, 1));
+ if ($sex !~ /^[MF]$/) {
+ if ($defaultlanguage eq "F") {
+ print "Sexe incorrect [$sex]. Entrez M ou F svp.\n";
+ } else {
+ print "Illegal gender [$sex]. Please input M or F.\n";
+ }
+ return 103;
+ }
+ if ($passwd eq "") {
+ return 108 if (($passwd = typepasswd()) eq "");
+ }
+ if (verify_password($passwd) == 0) {
+ return 104;
+ }
+ print $so pack("va24a24a1a40", 0x7930, $userid, $passwd, $sex, "");
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7931) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 106;
+ }
+ $buf = readso(28);
+ if (unpack("V", $buf) == -1 || unpack("V", $buf) == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Echec à la création du compte [$userid]. Un compte identique existe déjà.\n";
+ } else {
+ print "Account [$userid] creation failed. Same account already exists.\n";
+ }
+ return 107;
+ } else {
+ if ($defaultlanguage eq "F") {
+ printf "Compte [$userid] créé avec succès [id: %d].\n", unpack("V",$buf);
+ } else {
+ printf "Account [$userid] is successfully created [id: %d].\n", unpack("V",$buf);
+ }
+ }
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: add an account with an e-mail
+sub createaccount() {
+ my($userid, $sex, $email, $passwd) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple> create nomtest Male mon\@email.com motdepassetest\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example> create testname Male my\@mail.com testpass\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+# if ($userid =~ /[^A-Za-z0-9\@-_]/) {
+# if ($defaultlanguage eq "F") {
+# print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n";
+# } else {
+# print "Illegal character found in the account name ".$`."[${&}]${'}\n";
+# }
+# return 101;
+# }
+ $sex = uc(substr($sex, 0, 1));
+ if ($sex !~ /^[MF]$/) {
+ if ($defaultlanguage eq "F") {
+ print "Sexe incorrect [$sex]. Entrez M ou F svp.\n";
+ } else {
+ print "Illegal gender [$sex]. Please input M or F.\n";
+ }
+ return 103;
+ }
+ if (length($email) < 3) {
+ if ($defaultlanguage eq "F") {
+ print "Email trop courte [$email]. Entrez une e-mail valide svp.\n";
+ } else {
+ print "Email is too short [$email]. Please input a valid e-mail.\n";
+ }
+ return 109;
+ }
+ if (length($email) > 39) {
+ if ($defaultlanguage eq "F") {
+ print "Email trop longue [$email]. Entrez une e-mail de 39 caractères maximum svp.\n";
+ } else {
+ print "Email is too long [$email]. Please input an e-mail with 39 bytes at the most.\n";
+ }
+ return 109;
+ }
+ if (verify_email($email) == 0) {
+ if ($defaultlanguage eq "F") {
+ print "Email incorrecte [$email]. Entrez une e-mail valide svp.\n";
+ } else {
+ print "Invalid email [$email]. Please input a valid e-mail.\n";
+ }
+ return 109;
+ }
+ if ($passwd eq "") {
+ return 108 if (($passwd = typepasswd()) eq "");
+ }
+ if (verify_password($passwd) == 0) {
+ return 104;
+ }
+ print $so pack("va24a24a1a40", 0x7930, $userid, $passwd, $sex, $email);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7931) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 106;
+ }
+ $buf = readso(28);
+ if (unpack("V", $buf) == -1 || unpack("V", $buf) == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Echec à la création du compte [$userid]. Un compte identique existe déjà.\n";
+ } else {
+ print "Account [$userid] creation failed. Same account already exists.\n";
+ }
+ return 107;
+ } else {
+ if ($defaultlanguage eq "F") {
+ printf "Compte [$userid] créé avec succès [id: %d].\n", unpack("V",$buf);
+ } else {
+ printf "Account [$userid] is successfully created [id: %d].\n", unpack("V",$buf);
+ }
+ }
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: deletion of an account
+sub delaccount() {
+ my($userid) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple> del nomtestasupprimer\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example> del testnametodelete\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+ if ($defaultlanguage eq "F") {
+ print "** Etes-vous vraiment sûr de vouloir SUPPRIMER le compte [$userid]? (o/n) ";
+ } else {
+ print "** Are you really sure to DELETE account [$userid]? (y/n) ";
+ }
+ if (lc(substr(<STDIN>, 0, 1)) !~ /[oy]/) {
+ if ($defaultlanguage eq "F") {
+ print "Suppression annulée\n.";
+ } else {
+ print "Deletion canceled\n";
+ }
+ return 121;
+ }
+ print $so pack("va24", 0x7932, $userid);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7933) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 122;
+ }
+ $buf = readso(28);
+ my($id2, $name) = unpack("Va24", $buf);
+ while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
+ chop($name);
+ };
+ if ($id2 == -1 || $id2 == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Echec de la suppression du compte [$userid]. Le compte n'existe pas.\n";
+ } else {
+ print "Account [$userid] deletion failed. Account doesn't exist.\n";
+ }
+ return 123;
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Compte [$name][id: $id2] SUPPRIME avec succès.\n";
+ } else {
+ print "Account [$name][id: $id2] is successfully DELETED.\n";
+ }
+ }
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: modification of a password
+sub changepasswd() {
+ my($userid, $passwd) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple> passwd nomtest nouveaumotdepasse\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example> passwd testname newpassword\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+ if ($passwd eq "") {
+ return 134 if (($passwd = typepasswd()) eq "");
+ }
+ if (verify_password($passwd) == 0) {
+ return 131;
+ }
+ print $so pack("va24a24", 0x7934, $userid,$passwd);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7935) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 132;
+ }
+ $buf = readso(28);
+ my($id2, $name) = unpack("Va24", $buf);
+ while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
+ chop($name);
+ };
+ if ($id2 == -1 || $id2 == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Echec de la modification du mot de passe du compte [$userid].\n";
+ print "Le compte [$userid] n'existe pas.\n";
+ } else {
+ print "Account [$userid] password changing failed.\n";
+ print "Account [$userid] doesn't exist.\n";
+ }
+ return 133;
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Modification du mot de passe du compte [$name][id: $id2] réussie.\n";
+ } else {
+ print "Account [$name][id: $id2] password successfully changed.\n";
+ }
+ }
+ return 130;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: modification of an account e-mail
+sub changeemail() {
+ my($userid, $email) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple> email testname nouveauemail\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example> email testname newemail\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+ if (length($email) < 3) {
+ if ($defaultlanguage eq "F") {
+ print "Email trop courte [$email]. Entrez une e-mail valide svp.\n";
+ } else {
+ print "Email is too short [$email]. Please input a valid e-mail.\n";
+ }
+ return 109;
+ }
+ if (length($email) > 39) {
+ if ($defaultlanguage eq "F") {
+ print "Email trop longue [$email]. Entrez une e-mail de 39 caractères maximum svp.\n";
+ } else {
+ print "Email is too long [$email]. Please input an e-mail with 39 bytes at the most.\n";
+ }
+ return 109;
+ }
+ if (verify_email($email) == 0) {
+ if ($defaultlanguage eq "F") {
+ print "Email incorrect [$email]. Entrez une e-mail valide svp.\n";
+ } else {
+ print "Invalid email [$email]. Please input a valid e-mail.\n";
+ }
+ return 109;
+ }
+ print $so pack("va24a40", 0x7940, $userid, $email);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7941) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 162;
+ }
+ $buf = readso(28);
+ my($id2, $name) = unpack("Va24", $buf);
+ while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
+ chop($name);
+ };
+ if ($id2 == -1 || $id2 == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Echec de la modification de l'e-mail du compte [$userid].\n";
+ print "Le compte [$userid] n'existe pas.\n";
+ } else {
+ print "Account [$userid] e-mail changing failed.\n";
+ print "Account [$userid] doesn't exist.\n";
+ }
+ return 133;
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Modification de l'e-mail du compte [$name][id: $id2] réussie.\n";
+ } else {
+ print "Account [$name][id: $id2] e-mail successfully changed.\n";
+ }
+ }
+ return 160;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: search of accounts
+sub searchaccount() {
+ my($p1, $p2) = @_;
+ my($exp) = ("");
+ if ($p1 eq "-e" || $p1 eq "-r" || $p1 eq "--regex" || $p1 eq "--expr") {
+ if ($p2 eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez une expression régulière ou utilisez 'ls' pour avoir tous les comptes.\n";
+ } else {
+ print "Input a regular expression or use 'ls' to obtain all accounts.\n";
+ }
+ return 141;
+ }
+ $exp = $p2;
+ } else {
+ if ($p1 eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez une chaîne ou utilisez 'ls' pour avoir tous les comptes.\n";
+ } else {
+ print "Input a string or use 'ls' to obtain all accounts.\n";
+ }
+ return 141;
+ }
+ my($c) = 0;
+ $exp = lc($p1);
+ $exp =~ s/([\@])/\\$1/g;
+ $c += $exp =~ s/([\-\[\]])/\\$1/g;
+ $c += $exp =~ s/([\*\?])/.$1/g;
+ $c += $exp =~ s/\\\[(.)\\\-(.)\\\]/[$1-$2]/g;
+ $exp = "^$exp\$" if $c;
+ }
+ if (eval{ "" =~ /$exp/; }, $@) {
+ if ($defaultlanguage eq "F") {
+ print "Expression régulière non reconnue.\n";
+ } else {
+ print "Regular-Expression compiling failed.\n";
+ }
+ return 141;
+ }
+ my($i);
+ my($n, $st) = (0, 0);
+ # 0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567
+ if ($defaultlanguage eq "F") {
+ print " id_compte GM nom_utilisateur sexe count statut\n";
+ } else {
+ print "account_id GM user_name sex count state\n";
+ }
+ print "-------------------------------------------------------------------------------\n";
+ while(1) {
+ print $so pack("vV2", 0x7920, $st, 0);
+ $so->flush();
+ $buf = readso(4);
+ if (unpack("v", $buf) != 0x7921) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ exit(10);
+ }
+ my($len) = unpack("x2v", $buf);
+ last if ($len <= 4);
+ for($i = 4; $i < $len; $i += 38) {
+ my(@dat) = unpack("VCa24cVV", readso(38));
+ $st = $dat[0] + 1;
+ next if (lc($dat[2]) !~ /$exp/);
+ printf "%10d %2s %-24s%-5s %6d %-27s\n", $dat[0],
+ ($dat[1] == 0 ? " " : $dat[1]),
+ $dat[2],
+ ($defaultlanguage eq "F" ? ("Femme","Male","Servr")[$dat[3]] : ("Femal","Male","Servr")[$dat[3]]),
+ $dat[4],
+ (($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"),
+ "Unregistered ID",
+ "Incorrect Password",
+ "This ID is expired",
+ "Rejected from Server",
+ "Blocked by the GM Team", # You have been blocked by the GM Team
+ "Your EXE file is too old", # Your Game's EXE file is not the latest version
+ "Banishement or\n Prohibited to login until %s", # You are Prohibited to log in until %s
+ "Server is over populated", # Server is jammed due to over populated
+ "No MSG",
+ "This ID is totally erased")[$dat[5] == 100 ? 10 : $dat[5]]; # This ID has been totally erased
+ $n++;
+ }
+ }
+ if ($defaultlanguage eq "F") {
+ if ($n == 0) {
+ print "Aucun compte trouvé.\n";
+ } elsif ($n == 1) {
+ print "1 compte trouvé.\n";
+ } else {
+ print "$n comptes trouvés.\n";
+ }
+ } else {
+ if ($n == 0) {
+ print "No account found.\n";
+ } elsif ($n == 1) {
+ print "1 account found.\n";
+ } else {
+ print "$n accounts found.\n";
+ }
+ }
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: modify the sex of an account
+sub changesex() {
+ my($userid, $sex) = @_;
+ if ($userid eq "" || !defined($userid)) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple> sex nomtest Male\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example> sex testname Male\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+# if ($userid =~ /[^A-Za-z0-9\@-_]/) {
+# if ($defaultlanguage eq "F") {
+# print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n";
+# } else {
+# print "Illegal character found in the account name ".$`."[${&}]${'}\n";
+# }
+# return 101;
+# }
+ $sex = uc(substr($sex, 0, 1));
+ if ($sex !~ /^[MF]$/) {
+ if ($defaultlanguage eq "F") {
+ print "Sexe incorrect [$sex]. Entrez M ou F svp.\n";
+ } else {
+ print "Illegal gender [$sex]. Please input M or F.\n";
+ }
+ return 103;
+ }
+ print $so pack("va24a1", 0x793c, $userid, $sex);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x793d) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 152;
+ }
+ $buf = readso(28);
+ my($id2, $name) = unpack("Va24", $buf);
+ while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
+ chop($name);
+ };
+ if ($id2 == -1 || $id2 == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Echec du changement du sexe du compte [$userid].\n";
+ print "Le compte n'existe pas ou le sexe est déjà celui demandé.\n";
+ } else {
+ print "Account [$userid] sex changing failed.\n";
+ print "Account doesn't exist or the sex is already the good sex.\n";
+ }
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Sexe du compte [$name][id: $id2] changé avec succès.\n";
+ } else {
+ print "Account [$name][id: $id2] sex successfully changed.\n";
+ }
+ }
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: modify the GM level of an account
+sub changegmlevel() {
+ my($userid, $gm_level) = @_;
+ if ($userid eq "" || !defined($userid)) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple> gm nomtest 80\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example> gm testname 80\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+# if ($userid =~ /[^A-Za-z0-9\@-_]/) {
+# if ($defaultlanguage eq "F") {
+# print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n";
+# } else {
+# print "Illegal character found in the account name ".$`."[${&}]${'}\n";
+# }
+# return 101;
+# }
+ $gm_level = int($gm_level);
+ if ($gm_level < 0 || $gm_level > 99) {
+ if ($defaultlanguage eq "F") {
+ print "Niveau de GM incorrect [$gm_level]. Entrez une valeur de 0 à 99 svp.\n";
+ } else {
+ print "Illegal GM level [$gm_level]. Please input a value from 0 to 99.\n";
+ }
+ return 103;
+ }
+ print $so pack("va24C", 0x793e, $userid, $gm_level);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x793f) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 152;
+ }
+ $buf = readso(28);
+ my($id2, $name) = unpack("Va24", $buf);
+ while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
+ chop($name);
+ };
+ if ($id2 == -1 || $id2 == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Echec du changement du niveau de GM du compte [$userid].\n";
+ print "Le compte n'existe pas, le niveau de GM est déjà celui demandé,\n";
+ print "ou il est impossible de modifier le fichier des comptes GM.\n";
+ } else {
+ print "Account [$userid] GM level changing failed.\n";
+ print "Account doesn't exist, the GM level is already the good GM level,\n";
+ print "or it's impossible to modify the GM accounts file.\n";
+ }
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Niveau de GM du compte [$name][id: $id2] changé avec succès.\n";
+ } else {
+ print "Account [$name][id: $id2] GM level successfully changed.\n";
+ }
+ }
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Modification of a state
+sub changestate {
+ my($userid, $s, $error_message) = @_;
+ # Valid values: 0: ok, or value of the 0x006a packet + 1
+ if ($s eq "" || (($s < 0 || $s > 9) && $s != 100)) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez une des valeurs suivantes svp:\n";
+ print " 0 = Compte ok 6 = Your Game's EXE file is not the latest version\n";
+ } else {
+ print "Please input one of these values:\n";
+ print " 0 = Account ok 6 = Your Game's EXE file is not the latest version\n";
+ }
+ print " 1 = Unregistered ID 7 = You are Prohibited to log in until %s\n";
+ print " 2 = Incorrect Password 8 = Server is jammed due to over populated\n";
+ print " 3 = This ID is expired 9 = No MSG\n";
+ print " 4 = Rejected from Server 100 = This ID has been totally erased\n";
+ print " 5 = You have been blocked by the GM Team\n";
+ if ($defaultlanguage eq "F") {
+ print "<exemples> state nomtest 5\n";
+ print " state nomtest 7 fin de votre ban\n";
+ print " block <nom du compte>\n";
+ print " unblock <nom du compte>\n";
+ } else {
+ print "<examples> state testname 5\n";
+ print " state testname 7 end of your ban\n";
+ print " block <account name>\n";
+ print " unblock <account name>\n";
+ }
+ return 151;
+ }
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemples> state nomtest 5\n";
+ print " state nomtest 7 fin de votre ban\n";
+ print " block <nom du compte>\n";
+ print " unblock <nom du compte>\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<examples> state testname 5\n";
+ print " state testname 7 end of your ban\n";
+ print " block <account name>\n";
+ print " unblock <account name>\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+ if ($s != 7) {
+ $error_message = "-";
+ } else {
+ if (length($error_message) < 1) {
+ if ($defaultlanguage eq "F") {
+ print "Message d'erreur trop court. Entrez un message de 1-19 caractères.\n";
+ } else {
+ print "Error message is too short. Please input a message of 1-19 bytes.\n";
+ }
+ return 102;
+ }
+ if (length($error_message) > 19) {
+ if ($defaultlanguage eq "F") {
+ print "Message d'erreur trop long. Entrez un message de 1-19 caractères.\n";
+ } else {
+ print "Error message is too long. Please input a message of 1-19 bytes.\n";
+ }
+ return 102;
+ }
+ }
+ print $so pack("va24Va20", 0x7936, $userid, $s, $error_message);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7937) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 152;
+ }
+ $buf = readso(32);
+ my(@dat) = unpack("Va24V", $buf);
+ while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) {
+ chop($dat[1]);
+ };
+ if ($dat[0] != -1 && $dat[0] != 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Statut du compte [$dat[1]][id: $dat[0]] changé avec succès en [";
+ } else {
+ print "Account [$dat[1]][id: $dat[0]] state successfully changed in [";
+ }
+ print ((($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"),
+ "Unregistered ID",
+ "Incorrect Password",
+ "This ID is expired",
+ "Rejected from Server",
+ "You have been blocked by the GM Team",
+ "Your Game's EXE file is not the latest version",
+ "You are Prohibited to log in until %s",
+ "Server is jammed due to over populated",
+ "No MSG",
+ "This ID has been totally erased")[$dat[2] == 100 ? 10 : $dat[2]]);
+ print "].\n";
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Echec du changement du statut du compte [$userid]. Le compte n'existe pas.\n";
+ } else {
+ print "Account [$userid] state changing failed. Account doesn't exist.\n";
+ }
+ }
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Displaying of the number of online players
+sub getlogincount {
+ # Request to the login-server
+ print $so pack("v", 0x7938);
+ $so->flush();
+
+ $buf = readso(4);
+ # Connection failed
+ if (unpack("v", $buf) != 0x7939) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ exit(3);
+ }
+
+ # Get length of the received packet
+ my($len) = unpack("x2v", $buf) - 4;
+
+ # Read information of the servers
+ if ($len < 1) {
+ if ($defaultlanguage eq "F") {
+ printf " Aucun serveur n'est connecté au login serveur.\n";
+ } else {
+ printf " No server is connected to the login-server.\n";
+ }
+ } else {
+ my(@slist) = ();
+ for(; $len > 0; $len -= 32) {
+ my($name, $count) = unpack("x6 a20 V", readso(32));
+ $name = substr($name, 0, index($name, "\0"));
+ push @slist, [ $name, $count ];
+ }
+ # Displaying of result
+ my($i);
+ if ($defaultlanguage eq "F") {
+ printf " Nombre de joueurs en ligne (serveur: nb):\n";
+ } else {
+ printf " Number of online players (server: number).\n";
+ }
+ foreach $i(@slist) {
+ printf " %-20s : %5d\n", $i->[0], $i->[1];
+ }
+ }
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Modification of a memo field
+sub changememo {
+ my($userid, $memo) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple> memo nomtest nouveau memo\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example> memo testname new memo\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+ if (length($memo) > 254) {
+ if ($defaultlanguage eq "F") {
+ print "Mémo trop long (".length($memo)." caractères).\n";
+ print "Entrez un mémo de 254 caractères maximum svp.\n";
+ } else {
+ print "Memo is too long (".length($memo)." characters).\n";
+ print "Please input a memo of 254 bytes at the maximum.\n";
+ }
+ return 102;
+ }
+ if (length($memo) == 0) {
+ print $so pack("va24v", 0x7942, $userid, 0);
+ } else {
+ print $so pack("va24va".length($memo), 0x7942, $userid, length($memo), $memo);
+ }
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7943) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 152;
+ }
+ $buf = readso(28);
+ my($id2, $name) = unpack("Va24", $buf);
+ while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
+ chop($name);
+ };
+ if ($id2 == -1 || $id2 == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Echec du changement du mémo du compte [$userid]. Le compte n'existe pas.\n";
+ } else {
+ print "Account [$userid] memo changing failed. Account doesn't exist.\n";
+ }
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Mémo du compte [$name][id: $id2] changé avec succès.\n";
+ } else {
+ print "Account [$name][id: $id2] memo successfully changed.\n";
+ }
+ }
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Request to obtain an account id
+sub idaccount() {
+ my($userid) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple> id nomtest\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example> id testname\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+ print $so pack("va24", 0x7944, $userid);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7945) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 122;
+ }
+ $buf = readso(28);
+ my($id2, $name) = unpack("Va24", $buf);
+ while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
+ chop($name);
+ };
+ if ($id2 == -1 || $id2 == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Impossible de trouver l'id du compte [$userid]. Le compte n'existe pas.\n";
+ } else {
+ print "Unabled to find the account [$userid] id. Account doesn't exist.\n";
+ }
+ return 123;
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Le compte [$name] a pour id: $id2.\n";
+ } else {
+ print "The account [$name] have the id: $id2.\n";
+ }
+ }
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Request to obtain an account name
+sub nameaccount() {
+ my($id) = @_;
+ if ($id < 0) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un id ayant une valeur positive svp.\n";
+ } else {
+ print "Please input a positive value for the id.\n";
+ }
+ return 136;
+ }
+ print $so pack("vV", 0x7946, $id);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7947) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 122;
+ }
+ $buf = readso(28);
+ my($id2, $name) = unpack("Va24", $buf);
+ while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
+ chop($name);
+ };
+ if (length($name) == 0 || $name eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Impossible de trouver le nom du compte [id: $id2]. Le compte n'existe pas.\n";
+ } else {
+ print "Unabled to find the account [id: $id2] name. Account doesn't exist.\n";
+ }
+ return 123;
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Le compte [id: $id2] a pour nom: $name.\n";
+ } else {
+ print "The account [id: $id2] have the name: $name.\n";
+ }
+ }
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Set a validity limit of an account
+sub timesetaccount() {
+ my($userid, $date, $time) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple>: timeset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n";
+ print " timeset <nom_du_compte> 0 (0 = illimité)\n";
+ printf " Heure par défaut [hh:mm:ss]: 23:59:59\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example>: timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n";
+ print " timeset <account_name> 0 (0 = unlimited)\n";
+ printf " Default time [hh:mm:ss]: 23:59:59\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+ my($year, $month, $day) = split(/[.\-\/]/, $date);
+ my($hour, $minute, $second) = split(/:/, $time);
+ if ($time eq "") {
+ $hour = 23;
+ $minute = 59;
+ $second = 59;
+ }
+ my($timestamp);
+ if ($year eq "" ||
+ ($year != 0 && ($month eq "" || $day eq "" || $hour eq "" || $minute eq "" || $second eq ""))) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n";
+ } else {
+ print "Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n";
+ }
+ return 102;
+ }
+ if ($year == 0) {
+ $timestamp = 0;
+ } else {
+ if ($year < 70) {
+ $year = $year + 100;
+ }
+ if ($year >= 1900) {
+ $year = $year - 1900;
+ }
+ if ($month < 1 || $month > 12) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un mois correct svp (entre 1 et 12).\n";
+ } else {
+ print "Please give a correct value for the month (from 1 to 12).\n";
+ }
+ return 102;
+ }
+ $month = $month - 1;
+ if ($day < 1 || $day > 31) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un jour correct svp (entre 1 et 31).\n";
+ } else {
+ print "Please give a correct value for the day (from 1 to 31).\n";
+ }
+ return 102;
+ }
+ if ((($month == 3 || $month == 5 || $month == 8 || $month == 10) && $day > 30) ||
+ ($month == 1 && $day > 29)) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un jour correct en fonction du mois svp.\n";
+ } else {
+ print "Please give a correct value for a day of this month.\n";
+ }
+ return 102;
+ }
+ if ($hour < 0 || $hour > 23) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez une heure correcte svp (entre 0 et 23).\n";
+ } else {
+ print "Please give a correct value for the hour (from 0 to 23).\n";
+ }
+ return 102;
+ }
+ if ($minute < 0 || $minute > 59) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez des minutes correctes svp (entre 0 et 59).\n";
+ } else {
+ print "Please give a correct value for the minutes (from 0 to 59).\n";
+ }
+ return 102;
+ }
+ if ($second < 0 || $second > 59) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez des secondes correctes svp (entre 0 et 59).\n";
+ } else {
+ print "Please give a correct value for the seconds (from 0 to 59).\n";
+ }
+ return 102;
+ }
+ $timestamp = POSIX::mktime($second, $minute, $hour, $day, $month, $year, 0, 0, -1); # -1: no winter/summer time modification
+ if ($timestamp == undef) {
+ if ($defaultlanguage eq "F") {
+ print "Date incorrecte.\n";
+ print "Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n";
+ } else {
+ print "Invalid date.\n";
+ print "Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n";
+ }
+ return 102;
+ }
+ }
+
+ print $so pack("va24V", 0x7948, $userid, $timestamp);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7949) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 152;
+ }
+ $buf = readso(32);
+ my(@dat) = unpack("Va24V", $buf);
+ while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) {
+ chop($dat[1]);
+ };
+ if ($dat[0] != -1 && $dat[0] != 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Limite de validité du compte [$dat[1]][id: $dat[0]] changée avec succès ".
+ ($dat[2] == 0 ? "en [illimité].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2])));
+ } else {
+ print "Validity Limit of the account [$dat[1]][id: $dat[0]] successfully changed ".
+ ($dat[2] == 0 ? "to [unlimited].\n" : "to be until ".(POSIX::ctime($dat[2])));
+ }
+ # localtime($dat[2]) is also possible to display instead of POSIX::ctime.
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Echec du changement de la validité du compte [$userid]. Le compte n'existe pas.\n";
+ } else {
+ print "Account [$userid] validity limit changing failed. Account doesn't exist.\n";
+ }
+ }
+
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Add/substract time to the validity limit of an account
+sub timeaddaccount() {
+ my($userid, $modif) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print " <exemple> timeadd nomtest +1m-2mn1s-6y\n";
+ print " Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n";
+ print " et 6 ans dans le même temps.\n";
+ } else {
+ print "Please input an account name.\n";
+ print " <example> timeadd testname +1m-2mn1s-6y\n";
+ print " this example adds 1 month and 1 second, and substracts 2 minutes\n";
+ print " and 6 years at the same time.\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+ my($year, $month, $day) = (0, 0 ,0);
+ my($hour, $minute, $second) = (0, 0 ,0);
+
+ $modif = lc($modif);
+ while (length($modif) > 0) {
+ my($value) = int($modif);
+ if ($value == 0) {
+ $modif = substr($modif, 1);
+ } else {
+ if (substr($modif, 0, 1) =~ /[\-\+]/) {
+ $modif = substr($modif, 1);
+ }
+ while (length($modif) > 0 && substr($modif, 0, 1) =~ /[0-9]/) {
+ $modif = substr($modif, 1);
+ }
+ if (index($modif, "s") == 0) {
+ $second = $value;
+ $modif = substr($modif, 1);
+ } elsif (index($modif, "mn") == 0) {
+ $minute = $value;
+ $modif = substr($modif, 2);
+ } elsif (index($modif, "h") == 0) {
+ $hour = $value;
+ $modif = substr($modif, 1);
+ } elsif (index($modif, "d") == 0 || index($modif, "j") == 0) {
+ $day = $value;
+ $modif = substr($modif, 1);
+ } elsif (index($modif, "m") == 0) {
+ $month = $value;
+ $modif = substr($modif, 1);
+ } elsif (index($modif, "y") == 0 || index($modif, "a") == 0) {
+ $year = $value;
+ $modif = substr($modif, 1);
+ } else {
+ $modif = substr($modif, 1);
+ }
+ }
+ }
+
+ if ($defaultlanguage eq "F") {
+ print " année: $year\n";
+ print " mois: $month\n";
+ print " jour: $day\n";
+ print " heure: $hour\n";
+ print " minute: $minute\n";
+ print " seconde: $second\n";
+ } else {
+ print " year: $year\n";
+ print " month: $month\n";
+ print " day: $day\n";
+ print " hour: $hour\n";
+ print " minute: $minute\n";
+ print " second: $second\n";
+ }
+
+ if ($year == 0 && $month == 0 && $day == 0 && $hour == 0 && $minute == 0 && $second == 0) {
+ if ($defaultlanguage eq "F") {
+ print "Vous devez entrer un ajustement avec cette commande, svp:\n";
+ print " Valeur d'ajustement (-1, 1, +1, etc...)\n";
+ print " Element modifié:\n";
+ print " a ou y: année\n";
+ print " m: mois\n";
+ print " j ou d: jour\n";
+ print " h: heure\n";
+ print " mn: minute\n";
+ print " s: seconde\n";
+ print " <exemple> timeadd nomtest +1m-2mn1s-6y\n";
+ print " Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n";
+ print " et 6 ans dans le même temps.\n";
+ } else {
+ print "Please give an adjustment with this command:\n";
+ print " Adjustment value (-1, 1, +1, etc...)\n";
+ print " Modified element:\n";
+ print " a or y: year\n";
+ print " m: month\n";
+ print " j or d: day\n";
+ print " h: hour\n";
+ print " mn: minute\n";
+ print " s: second\n";
+ print " <example> timeadd testname +1m-2mn1s-6y\n";
+ print " this example adds 1 month and 1 second, and substracts 2 minutes\n";
+ print " and 6 years at the same time.\n";
+ }
+ return 137;
+ }
+ if ($year > 127 || $year < -127) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement d'années correct (de -127 à 127), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the years (from -127 to 127).\n";
+ }
+ return 137;
+ }
+ if ($month > 255 || $month < -255) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement de mois correct (de -255 à 255), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the months (from -255 to 255).\n";
+ }
+ return 137;
+ }
+ if ($day > 32767 || $day < -32767) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the days (from -32767 to 32767).\n";
+ }
+ return 137;
+ }
+ if ($hour > 32767 || $hour < -32767) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the hours (from -32767 to 32767).\n";
+ }
+ return 137;
+ }
+ if ($minute > 32767 || $minute < -32767) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the minutes (from -32767 to 32767).\n";
+ }
+ return 137;
+ }
+ if ($second > 32767 || $second < -32767) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the seconds (from -32767 to 32767).\n";
+ }
+ return 137;
+ }
+
+ print $so pack("va24vvvvvv", 0x7950, $userid, $year, $month, $day, $hour, $minute, $second);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7951) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 152;
+ }
+ $buf = readso(32);
+ my(@dat) = unpack("Va24V", $buf);
+ while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) {
+ chop($dat[1]);
+ };
+ if ($dat[0] == -1 || $dat[0] == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Echec du changement de la validité du compte [$userid]. Le compte n'existe pas.\n";
+ } else {
+ print "Account [$userid] validity limit changing failed. Account doesn't exist.\n";
+ }
+ } elsif ($dat[2] == 0) {
+ if ($defaultlanguage eq "F") {
+ print "Limite de validité du compte [$dat[1]][id: $dat[0]] inchangée.\n";
+ print "Le compte a une validité illimitée ou\n";
+ print "la modification est impossible avec les ajustements demandés.\n";
+ } else {
+ print "Validity limit of the account [$dat[1]][id: $dat[0]] unchanged.\n";
+ print "The account have an unlimited validity limit or\n";
+ print "the changing is impossible with the proposed adjustments.\n";
+ }
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Limite de validité du compte [$dat[1]][id: $dat[0]] changée avec succès ".
+ ($dat[2] == 0 ? "en [illimité].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2])));
+ } else {
+ print "Validity limit of the account [$dat[1]][id: $dat[0]] successfully changed ".
+ ($dat[2] == 0 ? "to [unlimited].\n" : "to be until ".(POSIX::ctime($dat[2])));
+ }
+ # localtime($dat[2]) is also possible to display instead of POSIX::ctime.
+ }
+
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Set the final date of a banishment of an account
+sub bansetaccount() {
+ my($userid, $date, $time) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n";
+ print " banset <nom_du_compte> 0 (0 = dé-bani)\n";
+ print " ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n";
+ print " unban/unbanish <nom du compte>\n";
+ printf " Heure par défaut [hh:mm:ss]: 23:59:59\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n";
+ print " banset <account_name> 0 (0 = un-banished)\n";
+ print " ban/banish yyyy/mm/dd hh:mm:ss <account name>\n";
+ print " unban/unbanish <account name>\n";
+ printf " Default time [hh:mm:ss]: 23:59:59\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+ my($year, $month, $day) = split(/[.\-\/]/, $date);
+ my($hour, $minute, $second) = split(/:/, $time);
+ if ($time eq "") {
+ $hour = 23;
+ $minute = 59;
+ $second = 59;
+ }
+ my($timestamp);
+ if ($year eq "" ||
+ ($year != 0 && ($month eq "" || $day eq "" || $hour eq "" || $minute eq "" || $second eq ""))) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n";
+ } else {
+ print "Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n";
+ }
+ return 102;
+ }
+ if ($year == 0) {
+ $timestamp = 0;
+ } else {
+ if ($year < 70) {
+ $year = $year + 100;
+ }
+ if ($year >= 1900) {
+ $year = $year - 1900;
+ }
+ if ($month < 1 || $month > 12) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un mois correct svp (entre 1 et 12).\n";
+ } else {
+ print "Please give a correct value for the month (from 1 to 12).\n";
+ }
+ return 102;
+ }
+ $month = $month - 1;
+ if ($day < 1 || $day > 31) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un jour correct svp (entre 1 et 31).\n";
+ } else {
+ print "Please give a correct value for the day (from 1 to 31).\n";
+ }
+ return 102;
+ }
+ if ((($month == 3 || $month == 5 || $month == 8 || $month == 10) && $day > 30) ||
+ ($month == 1 && $day > 29)) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un jour correct en fonction du mois svp.\n";
+ } else {
+ print "Please give a correct value for a day of this month.\n";
+ }
+ return 102;
+ }
+ if ($hour < 0 || $hour > 23) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez une heure correcte svp (entre 0 et 23).\n";
+ } else {
+ print "Please give a correct value for the hour (from 0 to 23).\n";
+ }
+ return 102;
+ }
+ if ($minute < 0 || $minute > 59) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez des minutes correctes svp (entre 0 et 59).\n";
+ } else {
+ print "Please give a correct value for the minutes (from 0 to 59).\n";
+ }
+ return 102;
+ }
+ if ($second < 0 || $second > 59) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez des secondes correctes svp (entre 0 et 59).\n";
+ } else {
+ print "Please give a correct value for the seconds (from 0 to 59).\n";
+ }
+ return 102;
+ }
+ $timestamp = POSIX::mktime($second, $minute, $hour, $day, $month, $year, 0, 0, -1); # -1: no winter/summer time modification
+ if ($timestamp == undef) {
+ if ($defaultlanguage eq "F") {
+ print "Date incorrecte.\n";
+ print "Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n";
+ } else {
+ print "Invalid date.\n";
+ print "Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n";
+ }
+ return 102;
+ }
+ }
+
+ print $so pack("va24V", 0x794a, $userid, $timestamp);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x794b) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 152;
+ }
+ $buf = readso(32);
+ my(@dat) = unpack("Va24V", $buf);
+ while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) {
+ chop($dat[1]);
+ };
+ if ($dat[0] != -1 && $dat[0] != 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Date finale de banissement du compte [$dat[1]][id: $dat[0]] changée avec succès ".
+ ($dat[2] == 0 ? "en [dé-bannie].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2])));
+ } else {
+ print "Final date of banishment of the account [$dat[1]][id: $dat[0]] successfully changed ".
+ ($dat[2] == 0 ? "to [unbanished].\n" : "to be until ".(POSIX::ctime($dat[2])));
+ }
+ # localtime($dat[2]) is also possible to display instead of POSIX::ctime.
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Echec du changement de la date finale de banissement du compte [$userid]. Le compte n'existe pas.\n";
+ } else {
+ print "Account [$userid] final date of banishment changing failed. Account doesn't exist.\n";
+ }
+ }
+
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Add/substract time to the final date of a banishment of an account
+sub banaddaccount() {
+ my($userid, $modif) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print " <exemple> banadd nomtest +1m-2mn1s-6y\n";
+ print " Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n";
+ print " et 6 ans dans le même temps.\n";
+ } else {
+ print "Please input an account name.\n";
+ print " <example> banadd testname +1m-2mn1s-6y\n";
+ print " this example adds 1 month and 1 second, and substracts 2 minutes\n";
+ print " and 6 years at the same time.\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+ my($year, $month, $day) = (0, 0 ,0);
+ my($hour, $minute, $second) = (0, 0 ,0);
+
+ $modif = lc($modif);
+ while (length($modif) > 0) {
+ my($value) = int($modif);
+ if ($value == 0) {
+ $modif = substr($modif, 1);
+ } else {
+ if (substr($modif, 0, 1) =~ /[\-\+]/) {
+ $modif = substr($modif, 1);
+ }
+ while (length($modif) > 0 && substr($modif, 0, 1) =~ /[0-9]/) {
+ $modif = substr($modif, 1);
+ }
+ if (index($modif, "s") == 0) {
+ $second = $value;
+ $modif = substr($modif, 1);
+ } elsif (index($modif, "mn") == 0) {
+ $minute = $value;
+ $modif = substr($modif, 2);
+ } elsif (index($modif, "h") == 0) {
+ $hour = $value;
+ $modif = substr($modif, 1);
+ } elsif (index($modif, "d") == 0 || index($modif, "j") == 0) {
+ $day = $value;
+ $modif = substr($modif, 1);
+ } elsif (index($modif, "m") == 0) {
+ $month = $value;
+ $modif = substr($modif, 1);
+ } elsif (index($modif, "y") == 0 || index($modif, "a") == 0) {
+ $year = $value;
+ $modif = substr($modif, 1);
+ } else {
+ $modif = substr($modif, 1);
+ }
+ }
+ }
+
+ if ($defaultlanguage eq "F") {
+ print " année: $year\n";
+ print " mois: $month\n";
+ print " jour: $day\n";
+ print " heure: $hour\n";
+ print " minute: $minute\n";
+ print " seconde: $second\n";
+ } else {
+ print " year: $year\n";
+ print " month: $month\n";
+ print " day: $day\n";
+ print " hour: $hour\n";
+ print " minute: $minute\n";
+ print " second: $second\n";
+ }
+
+ if ($year == 0 && $month == 0 && $day == 0 && $hour == 0 && $minute == 0 && $second == 0) {
+ if ($defaultlanguage eq "F") {
+ print "Vous devez entrer un ajustement avec cette commande, svp:\n";
+ print " Valeur d'ajustement (-1, 1, +1, etc...)\n";
+ print " Element modifié:\n";
+ print " a ou y: année\n";
+ print " m: mois\n";
+ print " j ou d: jour\n";
+ print " h: heure\n";
+ print " mn: minute\n";
+ print " s: seconde\n";
+ print " <exemple> banadd nomtest +1m-2mn1s-6y\n";
+ print " Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n";
+ print " et 6 ans dans le même temps.\n";
+ } else {
+ print "Please give an adjustment with this command:\n";
+ print " Adjustment value (-1, 1, +1, etc...)\n";
+ print " Modified element:\n";
+ print " a or y: year\n";
+ print " m: month\n";
+ print " j or d: day\n";
+ print " h: hour\n";
+ print " mn: minute\n";
+ print " s: second\n";
+ print " <example> banadd testname +1m-2mn1s-6y\n";
+ print " this example adds 1 month and 1 second, and substracts 2 minutes\n";
+ print " and 6 years at the same time.\n";
+ }
+ return 137;
+ }
+ if ($year > 127 || $year < -127) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement d'années correct (de -127 à 127), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the years (from -127 to 127).\n";
+ }
+ return 137;
+ }
+ if ($month > 255 || $month < -255) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement de mois correct (de -255 à 255), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the months (from -255 to 255).\n";
+ }
+ return 137;
+ }
+ if ($day > 32767 || $day < -32767) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the days (from -32767 to 32767).\n";
+ }
+ return 137;
+ }
+ if ($hour > 32767 || $hour < -32767) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the hours (from -32767 to 32767).\n";
+ }
+ return 137;
+ }
+ if ($minute > 32767 || $minute < -32767) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the minutes (from -32767 to 32767).\n";
+ }
+ return 137;
+ }
+ if ($second > 32767 || $second < -32767) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n";
+ } else {
+ print "Please give a correct adjustment for the seconds (from -32767 to 32767).\n";
+ }
+ return 137;
+ }
+
+ print $so pack("va24vvvvvv", 0x794c, $userid, $year, $month, $day, $hour, $minute, $second);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x794d) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 152;
+ }
+ $buf = readso(32);
+ my(@dat) = unpack("Va24V", $buf);
+ while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) {
+ chop($dat[1]);
+ };
+ if ($dat[0] == -1 || $dat[0] == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Echec du changement de la date finale de banissement du compte [$userid]. Le compte n'existe pas.\n";
+ } else {
+ print "Account [$userid] final date of banishment changing failed. Account doesn't exist.\n";
+ }
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Date finale de banissement du compte [$dat[1]][id: $dat[0]] changée avec succès ".
+ ($dat[2] == 0 ? "en [dé-bannie].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2])));
+ } else {
+ print "Final date of banishment of the account [$dat[1]][id: $dat[0]] successfully changed ".
+ ($dat[2] == 0 ? "to [unbanished].\n" : "to be until ".(POSIX::ctime($dat[2])));
+ }
+ # localtime($dat[2]) is also possible to display instead of POSIX::ctime.
+ }
+
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Request to displaying information about an account (by its name)
+sub whoaccount() {
+ my($userid) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple> who nomtest\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example> who testname\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+
+ print $so pack("va24", 0x7952, $userid);
+ $so->flush();
+
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7953) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 122;
+ }
+ my($id2, $GM_level, $name, $sex, $count, $status, $error_message, $last_login, $last_ip, $email, $validite, $ban_date, $memo_size) = unpack("VCa24cVVa20a24a16a40VVv", readso(148));
+ my($memo) = "";
+ if ($memo_size > 0) {
+ $memo = unpack("a".$memo_size, readso($memo_size));
+ }
+ while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
+ chop($name);
+ };
+ while (length($error_message) > 0 && substr($error_message, length($error_message)-1, 1) eq chr(0)) {
+ chop($error_message);
+ };
+ while (length($last_login) > 0 && substr($last_login, length($last_login)-1, 1) eq chr(0)) {
+ chop($last_login);
+ };
+ while (length($last_ip) > 0 && substr($last_ip, length($last_ip)-1, 1) eq chr(0)) {
+ chop($last_ip);
+ };
+ while (length($email) > 0 && substr($email, length($email)-1, 1) eq chr(0)) {
+ chop($email);
+ };
+ while (length($memo) > 0 && substr($memo, length($memo)-1, 1) eq chr(0)) {
+ chop($memo);
+ };
+
+ if ($id2 == -1 || $id2 == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Impossible de trouver le compte [$userid]. Le compte n'existe pas.\n";
+ } else {
+ print "Unabled to find the account [$userid]. Account doesn't exist.\n";
+ }
+ return 123;
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Le compte [$userid] a les caractéristiques suivantes:\n";
+ } else {
+ print "The account [$userid] is set with:\n";
+ }
+ if ($GM_level == 0) {
+ print " Id: $id2 (non-GM)\n";
+ } else {
+ if ($defaultlanguage eq "F") {
+ print " Id: $id2 (GM niveau $GM_level)\n";
+ } else {
+ print " Id: $id2 (GM level $GM_level)\n";
+ }
+ }
+ if ($defaultlanguage eq "F") {
+ print " Nom: '$name'\n";
+ print " Sexe: ".("Femme", "Male", "Serveur")[$sex]."\n";
+ } else {
+ print " Name: '$name'\n";
+ print " Sex: ".("Female", "Male", "Server")[$sex]."\n";
+ }
+ print " E-mail: $email\n";
+ if ($status == 7) {
+ print " Statut: 7 [You are Prohibited to log in until $error_message]\n";
+ } else {
+ print " Statut: $status [".(
+ ($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"),
+ "Unregistered ID",
+ "Incorrect Password",
+ "This ID is expired",
+ "Rejected from Server",
+ "You have been blocked by the GM Team",
+ "Your Game's EXE file is not the latest version",
+ "You are Prohibited to log in until %s",
+ "Server is jammed due to over populated",
+ "No MSG",
+ "This ID is totally erased")[$status == 100 ? 10 : $status]."]\n";
+ }
+ if ($defaultlanguage eq "F") {
+ print " Banissement: ".($ban_date == 0 ? "non banni.\n" : "jusqu'au ".(POSIX::ctime($ban_date)));
+ print " Compteur: $count connexion".("s", "")[$count > 1 ? 0 : 1]."\n";
+ print " Dernière connexion le: $last_login (ip: $last_ip)\n";
+ print " Limite de validité: ".($validite == 0 ? "illimité.\n" : "jusqu'au ".(POSIX::ctime($validite)));
+ } else {
+ print " Banishment: ".($ban_date == 0 ? "not banished.\n" : "until ".(POSIX::ctime($ban_date)));
+ print " Count: $count connection".("s", "")[$count > 1 ? 0 : 1]."\n";
+ print " Last connection at: $last_login (ip: $last_ip)\n";
+ print " Validity limit: ".($validite == 0 ? "unlimited.\n" : "until ".(POSIX::ctime($validite)));
+ }
+ print " Memo: '$memo'\n";
+ }
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Request to displaying information about an account (by its id)
+sub infoaccount() {
+ my($id) = @_;
+ if ($id < 0) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un id ayant une valeur positive svp.\n";
+ } else {
+ print "Please input a positive value for the id.\n";
+ }
+ return 136;
+ }
+
+ print $so pack("vV", 0x7954, $id);
+ $so->flush();
+
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x7953) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 122;
+ }
+ my($id2, $GM_level, $name, $sex, $count, $status, $error_message, $last_login, $last_ip, $email, $validite, $ban_date, $memo_size) = unpack("VCa24cVVa20a24a16a40VVv", readso(148));
+ my($memo) = "";
+ if ($memo_size > 0) {
+ $memo = unpack("a".$memo_size, readso($memo_size));
+ }
+ while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
+ chop($name);
+ };
+ while (length($error_message) > 0 && substr($error_message, length($error_message)-1, 1) eq chr(0)) {
+ chop($error_message);
+ };
+ while (length($last_login) > 0 && substr($last_login, length($last_login)-1, 1) eq chr(0)) {
+ chop($last_login);
+ };
+ while (length($last_ip) > 0 && substr($last_ip, length($last_ip)-1, 1) eq chr(0)) {
+ chop($last_ip);
+ };
+ while (length($email) > 0 && substr($email, length($email)-1, 1) eq chr(0)) {
+ chop($email);
+ };
+ while (length($memo) > 0 && substr($memo, length($memo)-1, 1) eq chr(0)) {
+ chop($memo);
+ };
+
+ if (length($name) == 0 || $name eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Impossible de trouver le nom du compte [id: $id2]. Le compte n'existe pas.\n";
+ } else {
+ print "Unabled to find the account [id: $id2] name. Account doesn't exist.\n";
+ }
+ return 123;
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Le compte [id: $id2] a les caractéristiques suivantes:\n";
+ } else {
+ print "The account [id: $id2] is set with:\n";
+ }
+ if ($GM_level == 0) {
+ print " Id: $id2 (non-GM)\n";
+ } else {
+ if ($defaultlanguage eq "F") {
+ print " Id: $id2 (GM niveau $GM_level)\n";
+ } else {
+ print " Id: $id2 (GM level $GM_level)\n";
+ }
+ }
+ if ($defaultlanguage eq "F") {
+ print " Nom: '$name'\n";
+ print " Sexe: ".("Femme", "Male", "Serveur")[$sex]."\n";
+ } else {
+ print " Name: '$name'\n";
+ print " Sex: ".("Female", "Male", "Server")[$sex]."\n";
+ }
+ print " E-mail: $email\n";
+ if ($status == 7) {
+ print " Statut: 7 [You are Prohibited to log in until $error_message]\n";
+ } else {
+ print " Statut: $status [".(
+ ($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"),
+ "Unregistered ID",
+ "Incorrect Password",
+ "This ID is expired",
+ "Rejected from Server",
+ "You have been blocked by the GM Team",
+ "Your Game's EXE file is not the latest version",
+ "You are Prohibited to log in until %s",
+ "Server is jammed due to over populated",
+ "No MSG",
+ "This ID is totally erased")[$status == 100 ? 10 : $status]."]\n";
+ }
+ if ($defaultlanguage eq "F") {
+ print " Banissement: ".($ban_date == 0 ? "non banni.\n" : "jusqu'au ".(POSIX::ctime($ban_date)));
+ print " Compteur: $count connexion".("s", "")[$count > 1 ? 0 : 1]."\n";
+ print " Dernière connexion le: $last_login (ip: $last_ip)\n";
+ print " Limite de validité: ".($validite == 0 ? "illimité.\n" : "jusqu'au ".(POSIX::ctime($validite)));
+ } else {
+ print " Banishment: ".($ban_date == 0 ? "not banished.\n" : "until ".(POSIX::ctime($ban_date)));
+ print " Count: $count connection".("s", "")[$count > 1 ? 0 : 1]."\n";
+ print " Last connection at: $last_login (ip: $last_ip)\n";
+ print " Validity limit: ".($validite == 0 ? "unlimited.\n" : "until ".(POSIX::ctime($validite)));
+ }
+ print " Memo: '$memo'\n";
+ }
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Check the validity of a password
+# (Note: never send back a password with login-server!! security of passwords)
+sub checkaccount() {
+ my($userid, $passwd) = @_;
+ if ($userid eq "") {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un nom de compte svp.\n";
+ print "<exemple> check testname motdepasse\n";
+ } else {
+ print "Please input an account name.\n";
+ print "<example> check testname password\n";
+ }
+ return 136;
+ }
+ if (verify_accountname($userid) == 0) {
+ return 102;
+ }
+ if ($passwd eq "") {
+ return 134 if (($passwd = typepasswd()) eq "");
+ }
+ if (verify_password($passwd) == 0) {
+ return 131;
+ }
+ print $so pack("va24a24", 0x793a, $userid,$passwd);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x793b) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 132;
+ }
+ $buf = readso(28);
+ my($id2, $name) = unpack("Va24", $buf);
+ while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
+ chop($name);
+ };
+ if ($id2 == -1 || $id2 == 4294967295) {
+ if ($defaultlanguage eq "F") {
+ print "Le compte [$userid] n'existe pas ou le mot de passe est incorrect.\n";
+ } else {
+ print "The account [$userid] doesn't exist or the password is incorrect.\n";
+ }
+ return 133;
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Le mot de passe donné correspond bien au compte [$name][id: $id2].\n";
+ } else {
+ print "The proposed password is correct for the account [$name][id: $id2].\n";
+ }
+ }
+ return 130;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Request to login-server to reload GM configuration file
+sub reloadGM() {
+ print $so pack("v", 0x7955);
+ $so->flush();
+ if ($defaultlanguage eq "F") {
+ print "Demande de recharger le fichier de configuration des GM envoyée.\n";
+ print "Vérifiez les comptes GM actuels (après rechargement):\n";
+ } else {
+ print "Request to reload the GM configuration file sended.\n";
+ print "Check the actual GM accounts (after reloading):\n";
+ }
+ &listaccount(0, 0, 1); # 1: to list only GM
+ return 180;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Send a broadcast message
+sub sendbroadcast() {
+ my($type, $message) = @_;
+ if ($message eq "" || length($message) == 0) {
+ if ($defaultlanguage eq "F") {
+ print "Entrez un message svp.\n";
+ if ($type == 0) {
+ print "<exemple> kami un message\n";
+ } else {
+ print "<exemple> kamib un message\n";
+ }
+ } else {
+ print "Please input a message.\n";
+ if ($type == 0) {
+ print "<example> kami a message\n";
+ } else {
+ print "<example> kamib a message\n";
+ }
+ }
+ return 136;
+ }
+
+ print $so pack("vvVa".length($message), 0x794e, $type, length($message), $message);
+ $so->flush();
+ $buf = readso(2);
+ if (unpack("v", $buf) != 0x794f) {
+ if ($defaultlanguage eq "F") {
+ print "Problème de connexion au serveur (réponse incorrecte).\n";
+ } else {
+ print "Connection error to the server (incorrect answer).\n";
+ }
+ return 152;
+ }
+ $buf = readso(2);
+ my($answer) = unpack("v", $buf);
+ if ($answer == -1 || $answer == 65535) {
+ if ($defaultlanguage eq "F") {
+ print "Echec de l'envoi du message. Aucun server de char en ligne.\n";
+ } else {
+ print "Message sending failed. No online char-server.\n";
+ }
+ } else {
+ if ($defaultlanguage eq "F") {
+ print "Message transmis au server de logins avec succès.\n";
+ } else {
+ print "Message successfully sended to login-server.\n";
+ }
+ }
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Change language of displaying
+sub changelanguage() {
+ my($language) = @_;
+ if ($language eq "" || length($language) == 0) {
+ if ($defaultlanguage == 'F') {
+ printf("Entrez une langue svp.\n");
+ printf("<exemple> language english\n");
+ printf(" language français\n");
+ } else {
+ printf("Please input a language.\n");
+ printf("<example> language english\n");
+ printf(" language français\n");
+ }
+ return 136;
+ }
+
+ $language = uc(substr($language, 0, 1));
+ if ($language =~ /^[EF]$/) {
+ $defaultlanguage = $language;
+ if ($defaultlanguage == 'F') {
+ printf("Changement de la langue d'affichage en Français.\n");
+ } else {
+ printf("Displaying language changed to English.\n");
+ }
+ } else {
+ if ($defaultlanguage == 'F') {
+ printf("Langue non paramétrée (langues possibles: 'Français' ou 'English').\n");
+ } else {
+ printf("Undefined language (possible languages: Français or English).\n");
+ }
+ }
+
+ return 0;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: sending 'end of connection' packet
+sub quit() {
+ print $so pack("v", 0x7532);
+ $so->flush();
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Get datas from the socket
+sub readso() {
+ my($len) = shift;
+ my($buf);
+ if (read($so, $buf, $len) < $len) {
+ if ($defaultlanguage eq "F") {
+ print "Erreur de lecture sur la Socket.\n";
+ } else {
+ print "Socket read error.\n";
+ }
+ exit(3);
+ }
+ return $buf;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Input of a password
+sub typepasswd {
+ my($passwd1, $passwd2);
+ cbreak();
+ if ($defaultlanguage eq "F") {
+ print "Entrez le mot de passe > "; $passwd1 = <STDIN>; chomp($passwd1); print "\n";
+ print "Ré-entrez le mot de passe > "; $passwd2 = <STDIN>; chomp($passwd2); print "\n";
+ } else {
+ print "Type the password > "; $passwd1 = <STDIN>; chomp($passwd1); print "\n";
+ print "Verify the password > "; $passwd2 = <STDIN>; chomp($passwd2); print "\n";
+ }
+ cooked();
+ if ($passwd1 ne $passwd2) {
+ if ($defaultlanguage eq "F") {
+ print "Erreur de vérification du mot de passe: Saisissez le même mot de passe svp.\n";
+ } else {
+ print "Password verification failed. Please input same password.\n";
+ }
+ return "";
+ }
+ return $passwd1;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Return ordonal text of a number
+sub makeordinal {
+ my($c) = shift;
+ if ($defaultlanguage eq "F") {
+ if ($c < 1) {
+ return $c;
+ }
+ return $c.("er", "ème")[$c == 1 ? 0 : 1];
+ } else {
+ if ($c % 10 < 4 && $c % 10 != 0 && ($c < 10 || $c > 20)) {
+ return $c.("st","nd","rd")[$c % 10 - 1];
+ }
+ return $c."th";
+ }
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Test of the validity of an account name (return 0 if incorrect, and 1 if ok)
+sub verify_accountname {
+ my($account_name) = @_; # Get the account_name
+ if ($account_name =~ /[\x00-\x1f]/) { # remove control char
+ my($c) = length($`) + 1;
+ if ($defaultlanguage eq "F") {
+ print "Caractère interdit trouvé dans le nom du compte (".makeordinal($c)." caractère).\n";
+ } else {
+ print "Illegal character found in the account name (".makeordinal($c)." character).\n";
+ }
+ return 0;
+ }
+ if (length($account_name) < 4) {
+ if ($defaultlanguage eq "F") {
+ print "Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n";
+ } else {
+ print "Account name is too short. Please input an account name of 4-23 bytes.\n";
+ }
+ return 0;
+ }
+ if (length($account_name) > 23) {
+ if ($defaultlanguage eq "F") {
+ print "Nom du compte trop long. Entrez un nom de compte de 4-23 caractères.\n";
+ } else {
+ print "Account name is too long. Please input an account name of 4-23 bytes.\n";
+ }
+ return 0;
+ }
+ return 1;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Test of the validity of password (return 0 if incorrect, and 1 if ok)
+sub verify_password {
+ my($password) = @_; # Get the password
+ if ($password =~ /[\x00-\x1f]/) {
+ my($c) = length($`) + 1;
+ if ($defaultlanguage eq "F") {
+ print "Caractère interdit trouvé dans le mot de passe (".makeordinal($c)." caractère).\n";
+ } else {
+ print "Illegal character found in the password (".makeordinal($c)." character).\n";
+ }
+ return 0;
+ }
+ if (length($password) < 4) {
+ if ($defaultlanguage eq "F") {
+ print "Mot de passe trop court. Entrez un mot de passe de 4-23 caractères.\n";
+ } else {
+ print "Password is too short. Please input a password of 4-23 bytes.\n";
+ }
+ return 0;
+ }
+ if (length($password) > 23) {
+ if ($defaultlanguage eq "F") {
+ print "Mot de passe trop long. Entrez un mot de passe de 4-23 caractères.\n";
+ } else {
+ print "Password is too long. Please input a password of 4-23 bytes.\n";
+ }
+ return 0;
+ }
+ return 1;
+}
+
+#--------------------------------------------------------------------------
+
+# Sub-function: Test of the validity of an e-mail (return 0 if incorrect, and 1 if ok)
+sub verify_email {
+ my($email) = @_; # Get the e-mail
+ # To ignore a '.' before the @ (wanadoo, a provider, do that)
+ $email =~ s/\.\@/\@/;
+ # If the e-mail is void, it's not correct -> return 0
+ if ($email eq '') {
+ return(0);
+ }
+ # If the e-mail have no "@", it's not correct -> return 0
+ if ($email !~ /\@/) {
+ return(0);
+ }
+ # If the e-mail have a ",", a space, a tab or a ";", it's not correct -> return 0
+ if ($email =~ /[\,|\s|\;]/) {
+ return(0)
+ };
+ # IF
+ # (the e-mail contains 2 "@", or ".." or "@." or starts or finishes by a ".")
+ # OR IF
+ # (the e-mail doesn't contain "@localhost" AND
+ # - it doesn't contain characters followed by "@" itself followed by letters itself followed by "." and 2 or more letters
+ # - or an IP address)
+ # -> so, it's not good ! (finish !)
+ if ($email =~ /(@.*@)|(\.\.)|(@\.)|(\.@)|(^\.)|(\.$)/ ||
+ ($email !~ /^.+\@localhost$/ &&
+ $email !~ /^.+\@\[?(\w|[-.])+\.[a-zA-Z]{2,3}|[0-9]{1,3}\]?$/)) {
+ return(0); # non-valid email
+ } else {
+ # If not, the e-email address is correct
+ return(1); # valid email
+ }
+}
\ No newline at end of file |