diff options
Diffstat (limited to 'tool/ladmin')
| -rw-r--r-- | tool/ladmin | 3793 |
1 files changed, 0 insertions, 3793 deletions
diff --git a/tool/ladmin b/tool/ladmin deleted file mode 100644 index d0c0be485..000000000 --- a/tool/ladmin +++ /dev/null @@ -1,3793 +0,0 @@ -#!/usr/bin/perl -use POSIX; -########################################################################## -# EAthena login-server remote administration tool -# New ladamin by [Yor] -########################################################################## -#-------------------------------INSTRUCTIONS------------------------------ -# Set the 4 variables below: -# IP of the login server. -# Port where the login-server listens incoming packets. -# Password of administration (same of config_athena.conf). -# Displayed language of the sofware (if not correct, english is used). -# IMPORTANT: -# Be sure that you authorize remote administration in login-server -# (see login_athena.conf, 'admin_state' parameter) -#------------------------------------------------------------------------- -my($loginserverip) = "127.0.0.1"; # IP of login-server -my($loginserverport) = 6900; # Port of login-server -my($loginserveradminpassword) = "admin"; # Administration password -my($connecttimeout) = 10; # Timeout of connection (in seconds) -my($passenc) = 2; # Encoding type of the password -my($defaultlanguage) = "E"; # Default language (F: Français/E: English) - # (if it's not 'F', default is English) - -#------------------------------------------------------------------------- -# LIST of COMMANDs that you can type at the prompt: -# To use these commands you can only type only the first letters. -# You must type a minimum of letters (you can not type 'a', -# because ladmin doesn't know if it's for 'aide' or for 'add') -# <Example> q <= quit, li <= list, pass <= passwd, etc. -# -# Note: every time you must give a account_name, you can use "" or '' (spaces can be included) -# -# aide/help/? -# Display the description of the commands -# aide/help/? [command] -# Display the description of the specified command -# -# add <account_name> <sex> <password> -# Create an account with the default email (a@a.com). -# Concerning the sex, only the first letter is used (F or M). -# The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail. -# When the password is omitted, the input is done without displaying of the pressed keys. -# <example> add testname Male testpass -# -# ban/banish yyyy/mm/dd hh:mm:ss <account name> -# Changes the final date of a banishment of an account. -# Same command of banset, except that account_name is at end -# -# banadd <account_name> <modifier> -# Adds or substracts time from the final date of a banishment of an account. -# Modifier is done as follows: -# Adjustment value (-1, 1, +1, etc...) -# Modified element: -# a or y: year -# m: month -# j or d: day -# h: hour -# mn: minute -# s: second -# <example> banadd testname +1m-2mn1s-6y -# this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time. -# NOTE: If you modify the final date of a non-banished account, -# you fix the final date to (actual time +- adjustments) -# -# banset <account_name> yyyy/mm/dd [hh:mm:ss] -# Changes the final date of a banishment of an account. -# Default time: 23:59:59 -# banset <account_name> 0 -# Set a non-banished account (0 = unbanished). -# -# block <account name> -# Set state 5 (You have been blocked by the GM Team) to an account. -# Same command of state <account_name> 5. -# -# check <account_name> <password> -# Check the validity of a password for an account -# NOTE: Server will never sends back a password. -# It's the only method you have to know if a password is correct. -# The other method is to have a ('physical') access to the accounts file. -# -# create <account_name> <sex> <email> <password> -# Like the 'add' command, but with e-mail moreover. -# <example> create testname Male my@mail.com testpass -# -# del <account name> -# Remove an account. -# This order requires confirmation. After confirmation, the account is deleted. -# -# email <account_name> <email> -# Modify the e-mail of an account. -# -# getcount -# Give the number of players online on all char-servers. -# -# gm <account_name> [GM_level] -# Modify the GM level of an account. -# Default value remove GM level (GM level = 0). -# <example> gm testname 80 -# -# id <account name> -# Give the id of an account. -# -# info <account_id> -# Display complete information of an account. -# -# kami <message> -# Sends a broadcast message on all map-server (in yellow). -# kamib <message> -# Sends a broadcast message on all map-server (in blue). -# -# language <language> -# Change the language of displaying. -# -# list/ls [start_id [end_id]] -# Display a list of accounts. -# 'start_id', 'end_id': indicate end and start identifiers. -# Research by name is not possible with this command. -# <example> list 10 9999999 -# -# listBan/lsBan [start_id [end_id]] -# Like list/ls, but only for accounts with state or banished -# -# listGM/lsGM [start_id [end_id]] -# Like list/ls, but only for GM accounts -# -# listOK/lsOK [start_id [end_id]] -# Like list/ls, but only for accounts without state and not banished -# -# memo <account_name> <memo> -# Modify the memo of an account. -# 'memo': it can have until 253 characters (with spaces or not). -# -# name <account_id> -# Give the name of an account. -# -# passwd <account_name> <new_password> -# Change the password of an account. -# When new password is omitted, the input is done without displaying of the pressed keys. -# -# quit/end/exit -# End of the program of administration -# -# reloadGM -# Reload GM configuration file -# -# search <expression> -# Seek accounts. -# Displays the accounts whose names correspond. -# search -r/-e/--expr/--regex <expression> -# Seek accounts by regular expression. -# Displays the accounts whose names correspond. -# -# sex <account_name> <sex> -# Modify the sex of an account. -# <example> sex testname Male -# -# state <account_name> <new_state> <error_message_#7> -# Change the state of an account. -# 'new_state': state is the state of the packet 0x006a + 1. The possibilities are: -# 0 = Account ok 6 = Your Game's EXE file is not the latest version -# 1 = Unregistered ID 7 = You are Prohibited to log in until %s -# 2 = Incorrect Password 8 = Server is jammed due to over populated -# 3 = This ID is expired 9 = No MSG -# 4 = Rejected from Server 100 = This ID has been totally erased -# 5 = You have been blocked by the GM Team -# all other values are 'No MSG', then use state 9 please. -# 'error_message_#7': message of the code error 6 = Your are Prohibited to log in until %s (packet 0x006a) -# -# timeadd <account_name> <modifier> -# Adds or substracts time from the validity limit of an account. -# Modifier is done as follows: -# Adjustment value (-1, 1, +1, etc...) -# Modified element: -# a or y: year -# m: month -# j or d: day -# h: hour -# mn: minute -# s: second -# <example> timeadd testname +1m-2mn1s-6y -# this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time. -# NOTE: You can not modify a unlimited validity limit. -# If you want modify it, you want probably create a limited validity limit. -# So, at first, you must set the validity limit to a date/time. -# -# timeset <account_name> yyyy/mm/dd [hh:mm:ss] -# Changes the validity limit of an account. -# Default time: 23:59:59 -# timeset <account_name> 0 -# Gives an unlimited validity limit (0 = unlimited). -# -# unban/unbanish <account name> -# Unban an account. -# Same command of banset 0. -# -# unblock <account name> -# Set state 0 (Account ok) to an account. -# Same command of state <account_name> 0. -# -# version -# Display the version of the login-server. -# -# who <account name> -# Displays complete information of an account. -# -#------------------------------------------------------------------------- -# Possibilities to execute ladmin in command line by usage of the software with a parameter: -# ./ladmin --mode param1 ... -# -# --makesymlink -- Create the symbolic links for a use in shell -# --add <account_name> <sex> <password> -- Create an account with the default email (or -a) -# --ban yyyy/mm/dd hh:mm:ss <account_name> -- Change the final date of a banishment of an account (or -b) -# --banadd <account_name> <modifier> -- Add or substract time from the final date of a banishment of an account (or - ba) -# --banset <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the final date of a banishment of an account (or -bs) -# --banset <account_name> 0 -- Unbanish an account (or -bs) -# --block <account_name> -- Set state 5 to an account (or -bl) -# --check <account_name> <password> -- Check the validity of a password for an account (or -check) -# --create <account_name> <sex> <email> <password> -- Create an account with email (or -c) -# --del <account_name> -- Remove an account (or -d) -# --email <account_name> <email> -- Modify an email of an account (or -e) -# --getcount -- Give the number of players online on all char-servers (or -g) -# --gm <account_name> <GM_level> -- Change the GM level of an account (or -gm) -# --id <account_name> -- Give the id of an account (or -i) -# --info <account_id> -- Display complete information of an account (or -info) -# --kami <message> -- Sends a broadcast message on all map-server (in yellow). -# --kamib <message> -- Sends a broadcast message on all map-server (in blue). -# --language <language> -- Change the language of displaying (-lang). -# --list [First_id [Last_id]] -- Display a list of accounts (or -l) -# --listBan [start_id [end_id]] -- Display a list of accounts with state or banished (or -lBan) -# --listGM [First_id [Last_id]] -- Display a list of GM accounts (or -lGM) -# --listOK [start_id [end_id]] -- Display a list of accounts without state and not banished (or -lOK) -# --memo <account_name> <memo> -- Modify the memo of an account (or -e) -# --name <account_id> -- Give the name of an account (or -n) -# --passwd <account_name> <new_password> -- Change the password of an account (or -p) -# --reloadGM -- Reload GM configuration file (or -r) -# --search <expression> -- Seek accounts (or -s) -# --search -e/-r/--expr/--regex <expression> -- Seek accounts by REGEX (or -s) -# --sex <account_name> <sex> -- Change the sex of an account (or -sex) -# --state <account_name> <new_state> <error_message_#7> -- Change the state of an account (or -t) -# --timeadd <account_name> <modifier> -- Add or substract time from the validity limit of an account (or - ta) -# --timeset <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit of an account (or -ts) -# --timeset <account_name> 0 -- Give a unlimited validity limit (or -ts) -# --unban/unbanish <account_name> -- Unban an account (or -uba) -# --unblock <account_name> -- Set state 0 to an account (or -ubl) -# --version -- Display the version of the login-server (or -v) -# --who <account_name> -- Display complete information of an account (or -w) -# -# <example> ./ladmin --addaccount testname Male testpass -# -#------------------------------------------------------------------------- -# Possibilities to execute ladmin with symbolic links in Shell -# To create the symbolic links, execute ladmin with the '-- makesymlink' option. -# -# addaccount <account_name> <sex> <password> -- Create an account with the default email -# banaccount yyyy/mm/dd hh:mm:ss <account_name> -- Change the final date of a banishment of an account -# banaddaccount <account_name> <modifier> -- Add or substract time from the final date of a banishment of an account -# bansetaccount <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the final date of a banishment of an account -# bansetaccount <account_name> 0 -- Unbanish an account -# blockaccount <account_name> -- Set state 5 (blocked by the GM Team) to an account -# checkaccount <account_name> <password> -- Check the validity of a password for an account -# createaccount <account_name> <sex> <email> <password> -- Create an account with email -# delaccount <account_name> -- Remove an account -# emailaccount <account_name> <email> -- Modify an email of an account -# getcount -- Give the number of players online on all char-servers -# gmaccount <account_name> <GM_level> -- Change the GM level of an account -# idaccount <account_name> -- Give the id of an account -# infoaccount <account_id> -- Display complete information of an account -# kami <message> -- Sends a broadcast message on all map-server (in yellow). -# kamib <message> -- Sends a broadcast message on all map-server (in blue). -# ladminlanguage <language> -- Change the language of displaying. -# listaccount [First_id [Last_id]] -- Display a list of accounts -# listBanaccount [start_id [end_id]] -- Display a list of accounts with state or banished -# listGMaccount [First_id [Last_id]] -- Display a list of GM accounts -# listOKaccount [start_id [end_id]] -- Display a list of accounts without state and not banished -# loginserverversion -- Display the version of the login-server -# memoaccount <account_name> <memo> -- Modify the memo of an account -# nameaccount <account_id> -- Give the name of an account -# passwdaccount <account_name> <new_password> -- Change the password of an account -# reloadGM -- Reload GM configuration file -# searchaccount <expression> -- Seek accounts -# searchaccount -e/-r/--expr/--regex <expression> -- Seek accounts by REGEX -# sexaccount <account_name> <sex> -- Change the sex of an account (or -sex) -# stateaccount <account_name> <new_state> <error_message_#7> -- Change the state of an account -# timeaddaccount <account_name> <modifier> -- Add or substract time from the validity limit of an account -# timesetaccount <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit of an account -# timesetaccount <account_name> 0 -- Give a unlimited validity limit -# unbanaccount <account_name> -- Unban an account -# unblockaccount <account_name> -- Set state 0 (Account ok) to an account -# whoaccount <account_name> -- Display complete information of an account -# <exemple> ./addaccount testname Male testpass -# -#------------------------------------------------------------------------- -# About the encoding: -# -# The Digest::MD5 module is necessary to use the encrypted password system. -# When the software cannot found the Digest::MD5 module, -# encoding is automatically disabled ($passenc=0), which allows -# to use this program in any cases. -# -#------------------------------------------------------------------------- -# How to use ladmin with UNIX: -# -# You excecute ladmin as a standard command. -# <Example of preparation to have an access to ladmin> -# $ mv ladmin ladmin_org -# $ nkf -eLu ladmin_org > ladmin -# $ chmod 700 ladmin -# <Example to start directly ladmin> -# $ perl ladmin -# -########################################################################## - - -use strict; -use IO::Socket; -use Term::ReadLine; -eval { use POSIX qw(:termios_h); }; -eval { use Digest::MD5 qw(md5); } if $passenc; -$passenc = 0 if($@); - -my($ver) = "1.00"; - -# Start of termios -my($termios, $orgterml, $termlecho, $termlnoecho) = (); -eval{ - $termios = POSIX::Termios->new(); - $termios->getattr(fileno(STDIN)); - $orgterml = $termios->getlflag(); - $termlecho = ECHO | ECHOK | ICANON; - $termlnoecho = $orgterml & ~$termlecho; -}; - -# Modification of termios for the displaying of passwords (no displays for pressed keys) -sub cbreak() { - if ($termios) { - $termios->setlflag($termlnoecho); - $termios->setcc(VTIME, 1); - $termios->setattr(fileno(STDIN), TCSANOW); - } -} -# Modification of termios to return at the normal displaying (after input of the passwords) -sub cooked() { - if ($termios) { - $termios->setlflag($orgterml); - $termios->setcc(VTIME,0); - $termios->setattr(fileno(STDIN),TCSANOW); - } -} -END{ cooked() } - -if ($defaultlanguage eq "F") { - print "Outil d'administration à distance de eAthena V.$ver\n"; -} else { - print "EAthena login-server administration tool V.$ver\n"; -} - -# Creation of the symbolic links for call of the program in line command of the shell -if ($ARGV[0] eq "--makesymlink") { - symlink $0, "loginserverversion"; - symlink $0, "addaccount"; - symlink $0, "banaccount"; - symlink $0, "banaddaccount"; - symlink $0, "bansetaccount"; - symlink $0, "blockaccount"; - symlink $0, "checkaccount"; - symlink $0, "createaccount"; - symlink $0, "delaccount"; - symlink $0, "emailaccount"; - symlink $0, "getcount"; - symlink $0, "gmaccount"; - symlink $0, "idaccount"; - symlink $0, "infoaccount"; - symlink $0, "kami"; - symlink $0, "kamib"; - symlink $0, "ladminlanguage"; - symlink $0, "listaccount"; - symlink $0, "listBanaccount"; - symlink $0, "listGMaccount"; - symlink $0, "listOKaccount"; - symlink $0, "memoaccount"; - symlink $0, "nameaccount"; - symlink $0, "passwdaccount"; - symlink $0, "reloadGM"; - symlink $0, "searchaccount"; - symlink $0, "sexaccount"; - symlink $0, "stateaccount"; - symlink $0, "timeaddaccount"; - symlink $0, "timesetaccount"; - symlink $0, "unbanaccount"; - symlink $0, "unblockaccount"; - symlink $0, "whoaccount"; - if ($defaultlanguage eq "F") { - print "Liens symbliques créés.\n"; - } else { - print "Symbolic links created.\n"; - } - exit(0); -} - -# Connection to the login-server -my($so,$er) = (); -eval{ - $so = IO::Socket::INET->new( - PeerAddr=> $loginserverip, - PeerPort=> $loginserverport, -# Proto => "tcp", - Timeout => $connecttimeout) or $er = 1; -}; -if ($er || $@) { - if ($defaultlanguage eq "F") { - print "\nImpossible de se connecter au serveur de login [${loginserverip}:$loginserverport] !\n"; - } else { - print "\nImpossible to have a connection with the login-server [${loginserverip}:$loginserverport] !\n"; - } - print "$!\n"; # Displaying of the error - exit(2); -} - -# Sending the administration password -if ($passenc == 0) { - print $so pack("v2a24",0x7918,0,$loginserveradminpassword); - $so->flush(); -} else { - print $so pack("v",0x791a); - $so->flush(); - my($buf) = readso(4); - if (unpack("v",$buf) != 0x01dc) { - if ($defaultlanguage eq "F") { - print "Erreur au login (échec de la création de la clef md5).\n"; - } else { - print "Error at login (failure of the md5 key creation).\n"; - } - } - $buf = readso(unpack("x2v",$buf)-4); - my($md5bin) = md5(($passenc == 1) ? $buf.$loginserveradminpassword : $loginserveradminpassword.$buf); - print $so pack("v2a16",0x7918,$passenc,$md5bin); - $so->flush(); -} - -# Waiting of the server reply -my($buf) = readso(3); - -if (unpack("v",$buf) != 0x7919 || unpack("x2c",$buf) != 0) { - if ($defaultlanguage eq "F") { - print "Erreur de login:\n"; - print " - mot de passe incorrect,\n"; - print " - système d'administration non activé, ou\n"; - print " - IP non autorisée.\n"; - } else { - print "Error at login:\n"; - print " - incorrect password,\n"; - print " - administration system not activated, or\n"; - print " - unauthorised IP.\n"; - } - quit(); - exit(4); -} - -if ($defaultlanguage eq "F") { - print "Connexion établie.\n"; -} else { - print "Established connection.\n"; -} - -#------------------------------------------------------------------------- -# Here are checked the command lines with arguments and symbolic links (no prompt) - -if ($0 =~ /addaccount$/ || - (($ARGV[0] eq "-a" || $ARGV[0] eq "--add") && ((shift @ARGV), 1))) { - my($r) = addaccount($ARGV[0], $ARGV[1], $ARGV[2]); - quit(); - exit($r); -} elsif ($0 =~ /banaccount$/ || $0 =~ /banishaccount$/ || - (($ARGV[0] eq "-b" || $ARGV[0] eq "--ban" || $ARGV[0] eq "--banish") && ((shift @ARGV), 1))) { - my($r) = bansetaccount($ARGV[1], $ARGV[2], $ARGV[0]); - quit(); - exit($r); -} elsif ($0 =~ /banaddaccount$/ || - (($ARGV[0] eq "-ba" || $ARGV[0] eq "--banadd") && ((shift @ARGV), 1))) { - my($r) = banaddaccount($ARGV[0], $ARGV[1]); - quit(); - exit($r); -} elsif ($0 =~ /bansetaccount$/ || - (($ARGV[0] eq "-bs" || $ARGV[0] eq "--banset") && ((shift @ARGV), 1))) { - my($r) = bansetaccount($ARGV[0], $ARGV[1], $ARGV[2]); - quit(); - exit($r); -} elsif ($0 =~ /blockaccount$/ || - (($ARGV[0] eq "-bl" || $ARGV[0] eq "--block") && ((shift @ARGV), 1))) { - my($r) = changestate($ARGV[0], 5, ""); - quit(); - exit($r); -} elsif ($0 =~ /checkaccount$/ || - (($ARGV[0] eq "-check" || $ARGV[0] eq "--check") && ((shift @ARGV), 1))) { - my($r) = checkaccount($ARGV[0], $ARGV[1]); - quit(); - exit($r); -} elsif ($0 =~ /createaccount$/ || - (($ARGV[0] eq "-c" || $ARGV[0] eq "--create") && ((shift @ARGV), 1))) { - my($r) = createaccount($ARGV[0], $ARGV[1], $ARGV[2], $ARGV[3]); - quit(); - exit($r); -} elsif ($0 =~ /delaccount$/ || - (($ARGV[0] eq "-d" || $ARGV[0] eq "--del") && ((shift @ARGV), 1))) { - my($r) = delaccount($ARGV[0]); - quit(); - exit($r); -} elsif ($0 =~ /emailaccount$/ || - (($ARGV[0] eq "-e" || $ARGV[0] eq "--email") && ((shift @ARGV), 1))) { - my($r) = changeemail($ARGV[0], $ARGV[1]); - quit(); - exit($r); -} elsif ($0 =~ /getcount$/ || - (($ARGV[0] eq "-g" || $ARGV[0] eq "--getcount") && ((shift @ARGV), 1))) { - my($r) = getlogincount(); - quit(); - exit($r); -} elsif ($0 =~ /gmaccount$/ || - (($ARGV[0] eq "-gm" || $ARGV[0] eq "--gm") && ((shift @ARGV), 1))) { - my($r) = changegmlevel($ARGV[0], $ARGV[1]); - quit(); - exit($r); -} elsif ($0 =~ /id$/ || - (($ARGV[0] eq "-i" || $ARGV[0] eq "--id") && ((shift @ARGV), 1))) { - my($r) = idaccount($ARGV[0]); - quit(); - exit($r); -} elsif ($0 =~ /infoaccount$/ || - (($ARGV[0] eq "-info" || $ARGV[0] eq "--info") && ((shift @ARGV), 1))) { - my($r) = infoaccount($ARGV[0]); - quit(); - exit($r); -} elsif ($0 =~ /kami$/ || - (($ARGV[0] eq "-kami" || $ARGV[0] eq "--kami") && ((shift @ARGV), 1))) { - my($r) = sendbroadcast(0, $ARGV[0]); - quit(); - exit($r); -} elsif ($0 =~ /kamib$/ || - (($ARGV[0] eq "-kamib" || $ARGV[0] eq "--kamib") && ((shift @ARGV), 1))) { - my($r) = sendbroadcast(0x10, $ARGV[0]); - quit(); - exit($r); -} elsif ($0 =~ /ladminlanguage$/ || - (($ARGV[0] eq "-lang" || $ARGV[0] eq "--language") && ((shift @ARGV), 1))) { - my($r) = changelanguage($ARGV[0]); - quit(); - exit($r); -} elsif ($0 =~ /listaccount$/ || - (($ARGV[0] eq "-l" || $ARGV[0] eq "--list") && ((shift @ARGV), 1))) { - my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 0); # 0: to list all - quit(); - exit($r); -} elsif ($0 =~ /listBanaccount$/ || - (($ARGV[0] eq "-lBan" || $ARGV[0] eq "--listBan") && ((shift @ARGV), 1))) { - my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 3); # 3: to list only accounts with state or banished - quit(); - exit($r); -} elsif ($0 =~ /listGMaccount$/ || - (($ARGV[0] eq "-lGM" || $ARGV[0] eq "--listGM") && ((shift @ARGV), 1))) { - my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 1); # 1: to list only GM - quit(); - exit($r); -} elsif ($0 =~ /listOKaccount$/ || - (($ARGV[0] eq "-lOK" || $ARGV[0] eq "--listOK") && ((shift @ARGV), 1))) { - my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 4); # 4: to list only accounts without state and not banished - quit(); - exit($r); -} elsif ($0 =~ /loginserverversion$/ || - (($ARGV[0] eq "-v" || $ARGV[0] eq "--version") && ((shift @ARGV), 1))) { - my($r) = checkloginversion(); - quit(); - exit($r); -} elsif ($0 =~ /memoaccount$/ || - (($ARGV[0] eq "-m" || $ARGV[0] eq "--memo") && ((shift @ARGV), 1))) { - my($r) = changememo($ARGV[0], $ARGV[1]); - quit(); - exit($r); -} elsif ($0 =~ /nameaccount$/ || - (($ARGV[0] eq "-n" || $ARGV[0] eq "--name") && ((shift @ARGV), 1))) { - my($r) = nameaccount(int($ARGV[0])); - quit(); - exit($r); -} elsif ($0 =~ /passwdaccount$/ || - (($ARGV[0] eq "-p" || $ARGV[0] eq "--passwd") && ((shift @ARGV), 1))) { - my($r) = changepasswd($ARGV[0], $ARGV[1]); - quit(); - exit($r); -} elsif ($0 =~ /reloadGM$/ || - (($ARGV[0] eq "-r" || $ARGV[0] eq "--reloadGM") && ((shift @ARGV), 1))) { - my($r) = reloadGM(); - quit(); - exit($r); -} elsif ($0 =~ /searchaccount$/ || - (($ARGV[0] eq "-s" || $ARGV[0] eq "--search") && ((shift @ARGV), 1))) { - my($r) = searchaccount($ARGV[0], $ARGV[1]); - quit(); - exit($r); -} elsif ($0 =~ /sexaccount$/ || - (($ARGV[0] eq "-sex" || $ARGV[0] eq "--sex") && ((shift @ARGV), 1))) { - my($r) = changesex($ARGV[0], $ARGV[1]); - quit(); - exit($r); -} elsif ($0 =~ /stateaccount$/ || - (($ARGV[0] eq "-t" || $ARGV[0] eq "--state") && ((shift @ARGV), 1))) { - my($r) = changestate($ARGV[0], $ARGV[1], $ARGV[2]); - quit(); - exit($r); -} elsif ($0 =~ /timeaddaccount$/ || - (($ARGV[0] eq "-ta" || $ARGV[0] eq "--timeadd") && ((shift @ARGV), 1))) { - my($r) = timeaddaccount($ARGV[0], $ARGV[1]); - quit(); - exit($r); -} elsif ($0 =~ /timesetaccount$/ || - (($ARGV[0] eq "-ts" || $ARGV[0] eq "--timeset") && ((shift @ARGV), 1))) { - my($r) = timesetaccount($ARGV[0], $ARGV[1], $ARGV[2]); - quit(); - exit($r); -} elsif ($0 =~ /unbanaccount$/ || $0 =~ /unbanishaccount$/ || - (($ARGV[0] eq "-uba" || $ARGV[0] eq "--unban" || $ARGV[0] eq "--unbanish") && ((shift @ARGV), 1))) { - my($r) = bansetaccount($ARGV[0], 0, ""); - quit(); - exit($r); -} elsif ($0 =~ /unblockaccount$/ || - (($ARGV[0] eq "-ubl" || $ARGV[0] eq "--unblock") && ((shift @ARGV), 1))) { - my($r) = changestate($ARGV[0], 0, ""); - quit(); - exit($r); -} elsif ($0 =~ /whoaccount$/ || - (($ARGV[0] eq "-w" || $ARGV[0] eq "--who") && ((shift @ARGV), 1))) { - my($r) = whoaccount($ARGV[0]); - quit(); - exit($r); -} - -#------------------------------------------------------------------------- -if ($defaultlanguage eq "F") { - print "Lecture de la version du serveur de login...\n"; -} else { - print "Reading of the version of the login-server...\n"; -} -checkloginversion(); - -# Set the prompt line -my($term) = new Term::ReadLine "ladmin"; - -# Here begin the infinite loop to read prompts -while(1) { - # Displaying of the prompt - print "\n"; - if ($defaultlanguage eq "F") { - printf "\033[32mPour afficher les commandes, tapez 'Entrée'.\033[0m\n"; - } else { - printf "\033[32mTo list the commands, type 'enter'.\033[0m\n"; - } - my($cmd) = $term->readline("ladmin> "); - # split and recovery of the input - chomp $cmd; # remove cariage return - $cmd =~ s/\x1b\[\d*\w//g; # remove (esc)[(number)(1alpha) = screen control sequence - $cmd =~ s/[\x00-\x1f]//g; # remove control char - my($command, $parameters) = split /\s+/,$cmd,2; # extract command and parameters - $command = lc($command); # command in lowercase - my(@paramlist) = split /\s+/,$parameters; # get list of parameters - - if ($command eq "?" || $command eq "") { - $command = "aide" if ($defaultlanguage eq "F"); - $command = "help" if ($defaultlanguage ne "F"); - } - - # Analyse of the command - eval { -# help - if ("aide" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'? - displayhelp("aide", $paramlist[0]); - } elsif ("help" =~ /^\Q$command/) { - displayhelp("help", $paramlist[0]); - -# general commands - } elsif ("add" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'? - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(.*)/)) { - addaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> <sex> <password> - } elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) { - addaccount($paramlist[0], $paramlist[1], ""); # <account_name> <sex> <password> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(.*)/)) { - addaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> <sex> <password> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) { - addaccount($paramlist[0], $paramlist[1], ""); # <account_name> <sex> <password> - } else { - @paramlist = split /\s+/,$parameters; - addaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> <sex> <password> - } - - } elsif ($command eq "ban" || ("banish" =~ /^\Q$command/ && length($command) >= 4)) { - if (@paramlist = ($parameters =~ m/^(\S+)\s+(\S+)\s+"(.*)"/)) { # yyyy/mm/dd hh:mm:ss <account_name> - bansetaccount($paramlist[2], $paramlist[0], $paramlist[1]); # <account_name> yyyy/mm/dd [hh:mm:ss] - } elsif (@paramlist = ($parameters =~ m/^(\S+)\s+(\S+)\s+'(.*)'/)) { # yyyy/mm/dd hh:mm:ss <account_name> - bansetaccount($paramlist[2], $paramlist[0], $paramlist[1]); # <account_name> yyyy/mm/dd [hh:mm:ss] - } else { - @paramlist = split /\s+/,$parameters,3; # yyyy/mm/dd hh:mm:ss <account_name> - bansetaccount($paramlist[2], $paramlist[0], $paramlist[1]); # <account_name> yyyy/mm/dd [hh:mm:ss] - } - - } elsif (("banadd" =~ /^\Q$command/ || $command eq "ba") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'? - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) { - banaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) { - banaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier> - } else { - @paramlist = split /\s+/,$parameters; - banaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier> - } - - } elsif (("banset" =~ /^\Q$command/ || $command eq "bs") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'? - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)/)) { - bansetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss] - } elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) { - bansetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss] - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)/)) { - bansetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss] - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) { - bansetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss] - } else { - @paramlist = split /\s+/,$parameters; - bansetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss] - } - - } elsif ("block" =~ /^\Q$command/ && length($command) >= 2) { - if (@paramlist = ($parameters =~ m/^"(.*)"/)) { - changestate($paramlist[0], 5, ""); # <account_name> <new_state> <error_message_#7> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) { - changestate($paramlist[0], 5, ""); # <account_name> <new_state> <error_message_#7> - } else { - @paramlist = split /\s+/,$parameters,1; - changestate($paramlist[0], 5, ""); # <account_name> <new_state> <error_message_#7> - } - - } elsif ("check" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'? - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(.*)/)) { - checkaccount($paramlist[0], $paramlist[1]); # <account_name> <password> - } elsif (@paramlist = ($parameters =~ m/^"(.*)"/)) { - checkaccount($paramlist[0], ""); # <account_name> <password> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(.*)/)) { - checkaccount($paramlist[0], $paramlist[1]); # <account_name> <password> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) { - checkaccount($paramlist[0], ""); # <account_name> <password> - } else { - @paramlist = split /\s+/,$parameters; - checkaccount($paramlist[0], $paramlist[1]); # <account_name> <password> - } - - } elsif ("create" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'? - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)\s+(.*)/)) { - createaccount($paramlist[0], $paramlist[1], $paramlist[2], $paramlist[3]); # <account_name> <sex> <email> <password> - } elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)/)) { - createaccount($paramlist[0], $paramlist[1], $paramlist[2], ""); # <account_name> <sex> <email> <password> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)\s+(.*)/)) { - createaccount($paramlist[0], $paramlist[1], $paramlist[2], $paramlist[3]); # <account_name> <sex> <email> <password> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)/)) { - createaccount($paramlist[0], $paramlist[1], $paramlist[2], ""); # <account_name> <sex> <email> <password> - } else { - @paramlist = split /\s+/,$parameters; - createaccount($paramlist[0], $paramlist[1], $paramlist[2], $paramlist[3]); # <account_name> <sex> <email> <password> - } - - } elsif ("del" =~ /^\Q$command/ || "delete" =~ /^\Q$command/) { - if (@paramlist = ($parameters =~ m/^"(.*)"/)) { - delaccount($paramlist[0]); # <account_name> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) { - delaccount($paramlist[0]); # <account_name> - } else { - @paramlist = split /\s+/,$parameters,1; - delaccount($paramlist[0]); # <account_name> - } - - } elsif ("email" =~ /^\Q$command/ && $command ne "e") { # check 1 letter command: 'email', 'end' or 'exit'? - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) { - changeemail($paramlist[0], $paramlist[1]); # <account_name> <email> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) { - changeemail($paramlist[0], $paramlist[1]); # <account_name> <email> - } else { - @paramlist = split /\s+/,$parameters; - changeemail($paramlist[0], $paramlist[1]); # <account_name> <email> - } - - } elsif ("getcount" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'? - getlogincount(); - - } elsif ("gm" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'? - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) { - changegmlevel($paramlist[0], int($paramlist[1])); # <account_name> <GM_level> - } elsif (@paramlist = ($parameters =~ m/^"(.*)"/)) { - changegmlevel($paramlist[0], 0); # <account_name> <GM_level> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) { - changegmlevel($paramlist[0], int($paramlist[1])); # <account_name> <GM_level> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) { - changegmlevel($paramlist[0], 0); # <account_name> <GM_level> - } else { - @paramlist = split /\s+/,$parameters; - changegmlevel($paramlist[0], int($paramlist[1])); # <account_name> <GM_level> - } - - } elsif ("id" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'? - if (@paramlist = ($parameters =~ m/^"(.*)"/)) { - idaccount($paramlist[0]); # <account_name> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) { - idaccount($paramlist[0]); # <account_name> - } else { - @paramlist = split /\s+/,$parameters,1; - idaccount($paramlist[0]); # <account_name> - } - - } elsif ("info" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'? - infoaccount(int($paramlist[0])); # <account_id> - - } elsif ($command eq "kami") { # check all letters command: 'kami' or 'kamib'? - @paramlist = split /\s+/,$parameters,1; - sendbroadcast(0, $paramlist[0]); # <type> <message> - - } elsif ($command eq "kamib") { # check all letters command: 'kami' or 'kamib'? - @paramlist = split /\s+/,$parameters,1; - sendbroadcast(0x10, $paramlist[0]); # <type> <message> - - } elsif ("language" =~ /^\Q$command/ && $command ne "l") { # check 1 letter command: 'list' or 'language'? - changelanguage($paramlist[0]); # <language> - - } elsif (("list" =~ /^\Q$command/ || $command eq "ls") && $command ne "l") { # check 1 letter command: 'list' or 'language'? - listaccount(int($paramlist[0]), int($paramlist[1]), 0); # [start_id [end_id]] 0: to list all - - } elsif (("listban" =~ /^\Q$command/ || $command eq "lsban") && $command ne "l") { # need to specificaly write Ban to have this list # check 1 letter command: 'list' or 'language'? - listaccount(int($paramlist[0]), int($paramlist[1]), 3); # [start_id [end_id]] 3: to list only accounts with state or banished - - } elsif (("listgm" =~ /^\Q$command/ || $command eq "lsgm") && $command ne "l") { # need to specificaly write GM to have this list # check 1 letter command: 'list' or 'language'? - listaccount(int($paramlist[0]), int($paramlist[1]), 1); # [start_id [end_id]] 1: to list only GM - - } elsif (("listok" =~ /^\Q$command/ || $command eq "lsok") && $command ne "l") { # need to specificaly write OK to have this list # check 1 letter command: 'list' or 'language'? - listaccount(int($paramlist[0]), int($paramlist[1]), 4); # [start_id [end_id]] 4: to list only accounts without state and not banished - - } elsif ("memo" =~ /^\Q$command/) { - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(.*)/)) { - changememo($paramlist[0], $paramlist[1]); # <account_name> <memo> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(.*)/)) { - changememo($paramlist[0], $paramlist[1]); # <account_name> <memo> - } else { - @paramlist = split /\s+/,$parameters,2; - changememo($paramlist[0], $paramlist[1]); # <account_name> <memo> - } - - } elsif ("name" =~ /^\Q$command/) { - nameaccount(int($paramlist[0])); # <account_id> - - } elsif ("passwd" =~ /^\Q$command/ || "password" =~ /^\Q$command/) { - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(.*)/)) { - changepasswd($paramlist[0], $paramlist[1]); # <account_name> <new_password> - } elsif (@paramlist = ($parameters =~ m/^"(.*)"/)) { - changepasswd($paramlist[0], ""); # <account_name> <new_password> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(.*)/)) { - changepasswd($paramlist[0], $paramlist[1]); # <account_name> <new_password> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) { - changepasswd($paramlist[0], ""); # <account_name> <new_password> - } else { - @paramlist = split /\s+/,$parameters,2; - changepasswd($paramlist[0], $paramlist[1]); # <account_name> <new_password> - } - - } elsif ("reloadgm" =~ /^\Q$command/) { - reloadGM(); - - } elsif ("search" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'? - $command ne "se") { # check 2 letters command: 'search' or 'sex'? - if (@paramlist = ($parameters =~ m/^(-{1,2}[re]\S*)\s+(.*)/)) { - searchaccount($paramlist[0], $paramlist[1]); # -r/-e/--expr/--regex <expression> | <expression> - } else { - @paramlist = split /\s+/,$parameters,1; - searchaccount($paramlist[0], ""); # -r/-e/--expr/--regex <expression> | <expression> - } - - } elsif ("sex" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'? - $command ne "se") { # check 2 letters command: 'search' or 'sex'? - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) { - changesex($paramlist[0], $paramlist[1]); # <account_name> <sex> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) { - changesex($paramlist[0], $paramlist[1]); # <account_name> <sex> - } else { - @paramlist = split /\s+/,$parameters; - changesex($paramlist[0], $paramlist[1]); # <account_name> <sex> - } - - } elsif ("state" =~ /^\Q$command/ && $command ne "s") { # check 1 letter command: 'search', 'state' or 'sex'? - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\d+)\s+(.*)/)) { - changestate($paramlist[0], int($paramlist[1]), $paramlist[2]); # <account_name> <new_state> <error_message_#7> - } elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\d+)/)) { - changestate($paramlist[0], int($paramlist[1]), ""); # <account_name> <new_state> <error_message_#7> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\d+)\s+(.*)/)) { - changestate($paramlist[0], int($paramlist[1]), $paramlist[2]); # <account_name> <new_state> <error_message_#7> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\d+)/)) { - changestate($paramlist[0], int($paramlist[1]), ""); # <account_name> <new_state> <error_message_#7> - } else { - @paramlist = split /\s+/,$parameters,3; - changestate($paramlist[0], int($paramlist[1]), $paramlist[2]); # <account_name> <new_state> <error_message_#7> - } - - } elsif (("timeadd" =~ /^\Q$command/ || $command eq "ta") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'? - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) { - timeaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) { - timeaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier> - } else { - @paramlist = split /\s+/,$parameters; - timeaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier> - } - - } elsif (("timeset" =~ /^\Q$command/ || $command eq "ts") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'? - if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)/)) { - timesetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss] - } elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) { - timesetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss] - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)/)) { - timesetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss] - } elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) { - timesetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss] - } else { - @paramlist = split /\s+/,$parameters; - timesetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss] - } - - } elsif ($command eq "unban" || ("unbanish" =~ /^\Q$command/ && length($command) >= 4)) { - if (@paramlist = ($parameters =~ m/^"(.*)"/)) { - bansetaccount($paramlist[0], 0, ""); # <account_name> yyyy/mm/dd [hh:mm:ss] - } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) { - bansetaccount($paramlist[0], 0, ""); # <account_name> yyyy/mm/dd [hh:mm:ss] - } else { - @paramlist = split /\s+/,$parameters,1; - bansetaccount($paramlist[0], 0, ""); # <account_name> yyyy/mm/dd [hh:mm:ss] - } - - } elsif ("unblock" =~ /^\Q$command/ && length($command) >= 4) { - if (@paramlist = ($parameters =~ m/^"(.*)"/)) { - changestate($paramlist[0], 0, ""); # <account_name> <new_state> <error_message_#7> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) { - changestate($paramlist[0], 0, ""); # <account_name> <new_state> <error_message_#7> - } else { - @paramlist = split /\s+/,$parameters,1; - changestate($paramlist[0], 0, ""); # <account_name> <new_state> <error_message_#7> - } - - } elsif ("version" =~ /^\Q$command/) { - checkloginversion(); - - } elsif ("who" =~ /^\Q$command/) { - if (@paramlist = ($parameters =~ m/^"(.*)"/)) { - whoaccount($paramlist[0]); # <account_name> - } elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) { - whoaccount($paramlist[0]); # <account_name> - } else { - @paramlist = split /\s+/,$parameters,1; - whoaccount($paramlist[0]); # <account_name> - } - -# quit - } elsif ("quit" =~ /^\Q$command/ || - (("end" =~ /^\Q$command/ || "exit" =~ /^\Q$command/) && $command ne "e")) { # check 1 letter command: 'email', 'end' or 'exit'? - last; - -# unknown command - } elsif ($command) { - if ($defaultlanguage eq "F") { - print "Commande inconnue [".$command."]\n"; - } else { - print "Unknown command [".$command."]\n"; - } - } -# $term->addhistory($cmd) if $command; - }; - if ($@) { - if ($defaultlanguage eq "F") { - print "Erreur [".$command."]\n$@"; - } else { - print "Error [".$command."]\n$@"; - } - } -}; - -# End of the software -quit(); - -if ($defaultlanguage eq "F") { - print "Au revoir.\n"; -} else { - print "Bye.\n"; -} -exit(0); - -#-------------------------------------------------------------------------- - -# Sub-function: Displaying of the version of the login-server -sub checkloginversion() { - print $so pack("v",30000); # 0x7530 - $so->flush(); - $buf = readso(10); - # Analyse du Packet - my($ret, $maver, $miver, $rev, $dev, $mod, $type, $mdver) = unpack("vc6v", $buf); - if ($ret != 30001) { #0x7531 - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - exit(6); - } - - print " Login-Server [$loginserverip:$loginserverport]\n"; - printf " eAthena version %s-%d.%d", ("stable", "dev")[$dev], $maver, $miver; - printf " revision %d", $rev if $rev; - printf "%s%d.\n", ("", "-mod")[$mod], $mdver; - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Displaying of the help -sub displayhelp() { - my($help, $receivedcommand) = @_; - - my($command) = lc($receivedcommand); # command in lowercase - - if ($command eq "") { - $command = "not a command"; # any value that is not a command - } - - if ($command eq "?") { - $command = "aide" if ($defaultlanguage eq "F"); - $command = "help" if ($defaultlanguage ne "F"); - } - - if ($help eq "aide") { - if ("aide" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'? - printf "aide/help/?\n"; - printf " Affiche la description des commandes\n"; - printf "aide/help/? [commande]\n"; - printf " Affiche la description de la commande specifiée\n"; - } elsif ("help" =~ /^\Q$command/) { - printf "aide/help/?\n"; - printf " Display the description of the commands\n"; - printf "aide/help/? [command]\n"; - printf " Display the description of the specified command\n"; - } elsif ("add" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'? - printf "add <nomcompte> <sexe> <motdepasse>\n"; - printf " Crée un compte avec l'email par défaut (a\@a.com).\n"; - printf " Concernant le sexe, seule la première lettre compte (F ou M).\n"; - printf " L'e-mail est a\@a.com (e-mail par défaut). C'est comme n'avoir aucun e-mail.\n"; - printf " Lorsque motdepasse est omis, la saisie se fait sans que la frappe se voit.\n"; - printf " <exemple> add testname Male testpass\n"; - } elsif ($command eq "ban" || ("banish" =~ /^\Q$command/ && length($command) >= 4)) { - printf "ban/banish aaaa/mm/jj hh:mm:ss <nomcompte>\n"; - printf " Change la date de fin de bannissement d'un compte.\n"; - printf " La différence avec banset est la position du nom du compte.\n"; - } elsif (("banadd" =~ /^\Q$command/ || $command eq "ba") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'? - printf "banadd <nomcompte> <Modificateur>\n"; - printf " Ajoute ou soustrait du temps à la date de banissement d'un compte.\n"; - printf " Les modificateurs sont construits comme suit:\n"; - printf " Valeur d'ajustement (-1, 1, +1, etc...)\n"; - printf " Elément modifié:\n"; - printf " a ou y: année\n"; - printf " m: mois\n"; - printf " j ou d: jour\n"; - printf " h: heure\n"; - printf " mn: minute\n"; - printf " s: seconde\n"; - printf " <exemple> banadd testname +1m-2mn1s-6a\n"; - printf " Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n"; - printf " et 6 ans dans le même temps.\n"; - printf "NOTE: Si vous modifez la date de banissement d'un compte non bani,\n"; - printf " vous indiquez comme date (le moment actuel +- les ajustements)\n"; - } elsif (("banset" =~ /^\Q$command/ || $command eq "bs") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'? - printf "banset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n"; - printf " Change la date de fin de bannissement d'un compte.\n"; - printf " Heure par défaut: 23:59:59\n"; - printf "banset <nomcompte> 0\n"; - printf " Débanni un compte (0 = de-banni).\n"; - } elsif ("block" =~ /^\Q$command/ && length($command) >= 2) { - printf "block <nom compte>\n"; - printf " Place le status d'un compte à 5 (You have been blocked by the GM Team).\n"; - printf " La commande est l'équivalent de state <nom_compte> 5.\n"; - } elsif ("check" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'? - printf "check <nomcompte> <motdepasse>\n"; - printf " Vérifie la validité d'un mot de passe pour un compte\n"; - printf " NOTE: Le serveur n'enverra jamais un mot de passe.\n"; - printf " C'est la seule méthode que vous possédez pour savoir\n"; - printf " si un mot de passe est le bon. L'autre méthode est\n"; - printf " d'avoir un accès ('physique') au fichier des comptes.\n"; - } elsif ("create" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'? - printf "create <nomcompte> <sexe> <email> <motdepasse>\n"; - printf " Comme la commande add, mais avec l'e-mail en plus.\n"; - printf " <exemple> create testname Male mon\@mail.com testpass\n"; - } elsif ("del" =~ /^\Q$command/ || "delete" =~ /^\Q$command/) { - printf "del <nomcompte>\n"; - printf " Supprime un compte.\n"; - printf " La commande demande confirmation. Après confirmation, le compte est détruit.\n"; - } elsif ("email" =~ /^\Q$command/ && $command ne "e") { # check 1 letter command: 'email', 'end' or 'exit'? - printf "email <nomcompte> <email>\n"; - printf " Modifie l'e-mail d'un compte.\n"; - } elsif ("getcount" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'? - printf "getcount\n"; - printf " Donne le nombre de joueurs en ligne par serveur de char.\n"; - } elsif ("gm" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'? - printf "gm <nomcompte> [Niveau_GM]\n"; - printf " Modifie le niveau de GM d'un compte.\n"; - printf " Valeur par défaut: 0 (suppression du niveau de GM).\n"; - printf " <exemple> gm nomtest 80\n"; - } elsif ("id" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'? - printf "id <nomcompte>\n"; - printf " Donne l'id d'un compte.\n"; - } elsif ("info" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'? - printf "info <idcompte>\n"; - printf " Affiche les informations sur un compte.\n"; - } elsif ($command eq "kami") { # check all letters command: 'kami' or 'kamib'? - printf "kami <message>\n"; - printf " Envoi un message général sur tous les serveurs de map (en jaune).\n"; - } elsif ($command eq "kamib") { # check all letters command: 'kami' or 'kamib'? - printf "kamib <message>\n"; - printf " Envoi un message général sur tous les serveurs de map (en bleu).\n"; - } elsif ("language" =~ /^\Q$command/ && $command ne "l") { # check 1 letter command: 'list' or 'language'? - printf("language <langue>\n"); - printf(" Change la langue d'affichage.\n"); - printf(" Langues possibles: 'Français' ou 'English'.\n"); - } elsif (("list" =~ /^\Q$command/ || $command eq "ls") && $command ne "l") { # check 1 letter command: 'list' or 'language'? - printf "list/ls [Premier_id [Dernier_id]]\n"; - printf " Affiche une liste de comptes.\n"; - printf " 'Premier_id', 'Dernier_id': indique les identifiants de départ et de fin.\n"; - printf " La recherche par nom n'est pas possible avec cette commande.\n"; - printf " <example> list 10 9999999\n"; - } elsif (("listban" =~ /^\Q$command/ || $command eq "lsban") && $command ne "l") { # need to specificaly write Ban to have this list # check 1 letter command: 'list' or 'language'? - printf "listBan/lsBan [Premier_id [Dernier_id]]\n"; - printf " Comme list/ls, mais seulement pour les comptes GM avec un statut ou bannis.\n"; - } elsif (("listgm" =~ /^\Q$command/ || $command eq "lsgm") && $command ne "l") { # need to specificaly write GM to have this list # check 1 letter command: 'list' or 'language'? - printf "listGM/lsGM [Premier_id [Dernier_id]]\n"; - printf " Comme list/ls, mais seulement pour les comptes GM.\n"; - } elsif (("listok" =~ /^\Q$command/ || $command eq "lsok") && $command ne "l") { # need to specificaly write OK to have this list # check 1 letter command: 'list' or 'language'? - printf "listOK/lsOK [Premier_id [Dernier_id]]\n"; - printf " Comme list/ls, mais seulement pour les comptes sans statut et non bannis.\n"; - } elsif ("memo" =~ /^\Q$command/) { - printf "memo <nomcompte> <memo>\n"; - printf " Modifie le mémo d'un compte.\n"; - printf " 'memo': Il peut avoir jusqu'à 253 caractères (avec des espaces ou non).\n"; - } elsif ("name" =~ /^\Q$command/) { - printf "name <idcompte>\n"; - printf " Donne le nom d'un compte.\n"; - } elsif ("passwd" =~ /^\Q$command/ || "password" =~ /^\Q$command/) { - printf "passwd <nomcompte> <nouveaumotdepasse>\n"; - printf " Change le mot de passe d'un compte.\n"; - printf " Lorsque nouveaumotdepasse est omis,\n"; - printf " la saisie se fait sans que la frappe ne se voit.\n"; - } elsif ("reloadgm" =~ /^\Q$command/) { - printf "reloadGM\n"; - printf " Reload GM configuration file\n"; - } elsif ("search" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'? - $command ne "se") { # check 2 letters command: 'search' or 'sex'? - printf "search <expression>\n"; - printf " Cherche des comptes.\n"; - printf " Affiche les comptes dont les noms correspondent.\n"; - printf "search -r/-e/--expr/--regex <expression>\n"; - printf " Cherche des comptes par expression regulière.\n"; - printf " Affiche les comptes dont les noms correspondent.\n"; - } elsif ("sex" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'? - $command ne "se") { # check 2 letters command: 'search' or 'sex'? - printf "sex <nomcompte> <sexe>\n"; - printf " Modifie le sexe d'un compte.\n"; - printf " <exemple> sex testname Male\n"; - } elsif ("state" =~ /^\Q$command/ && $command ne "s") { # check 1 letter command: 'search', 'state' or 'sex'? - printf "state <nomcompte> <nouveaustatut> <message_erreur_7>\n"; - printf " Change le statut d'un compte.\n"; - printf " 'nouveaustatut': Le statut est le même que celui du packet 0x006a + 1.\n"; - printf " les possibilités sont:\n"; - printf " 0 = Compte ok\n"; - printf " 1 = Unregistered ID\n"; - printf " 2 = Incorrect Password\n"; - printf " 3 = This ID is expired\n"; - printf " 4 = Rejected from Server\n"; - printf " 5 = You have been blocked by the GM Team\n"; - printf " 6 = Your Game's EXE file is not the latest version\n"; - printf " 7 = You are Prohibited to log in until...\n"; - printf " 8 = Server is jammed due to over populated\n"; - printf " 9 = No MSG\n"; - printf " 100 = This ID has been totally erased\n"; - printf " all other values are 'No MSG', then use state 9 please.\n"; - printf " 'message_erreur_7': message du code erreur 6 =\n"; - printf " = Your are Prohibited to log in until... (packet 0x006a)\n"; - } elsif (("timeadd" =~ /^\Q$command/ || $command eq "ta") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'? - printf "timeadd <nomcompte> <modificateur>\n"; - printf " Ajoute/soustrait du temps à la limite de validité d'un compte.\n"; - printf " Le modificateur est composé comme suit:\n"; - printf " Valeur modificatrice (-1, 1, +1, etc...)\n"; - printf " Elément modifié:\n"; - printf " a ou y: année\n"; - printf " m: mois\n"; - printf " j ou d: jour\n"; - printf " h: heure\n"; - printf " mn: minute\n"; - printf " s: seconde\n"; - printf " <exemple> timeadd testname +1m-2mn1s-6a\n"; - printf " Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n"; - printf " et 6 ans dans le même temps.\n"; - printf "NOTE: Vous ne pouvez pas modifier une limite de validité illimitée. Si vous\n"; - printf " désirez le faire, c'est que vous voulez probablement créer un limite de\n"; - printf " validité limitée. Donc, en premier, fixé une limite de valitidé.\n"; - } elsif (("timeset" =~ /^\Q$command/ || $command eq "ts") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'? - printf "timeset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n"; - printf " Change la limite de validité d'un compte.\n"; - printf " Heure par défaut: 23:59:59\n"; - printf "timeset <nomcompte> 0\n"; - printf " Donne une limite de validité illimitée (0 = illimitée).\n"; - } elsif ($command eq "unban" || ("unbanish" =~ /^\Q$command/ && length($command) >= 4)) { - printf "unban/unbanish <nom compte>\n"; - printf " Ote le banissement d'un compte.\n"; - printf " La commande est l'équivalent de banset <nom_compte> 0.\n"; - } elsif ("unblock" =~ /^\Q$command/ && length($command) >= 4) { - printf "unblock <nom compte>\n"; - printf " Place le status d'un compte à 0 (Compte ok).\n"; - printf " La commande est l'équivalent de state <nom_compte> 0.\n"; - } elsif ("version" =~ /^\Q$command/) { - printf "version\n"; - printf " Affiche la version du login-serveur.\n"; - } elsif ("who" =~ /^\Q$command/) { - printf "who <nomcompte>\n"; - printf " Affiche les informations sur un compte.\n"; - } elsif ("quit" =~ /^\Q$command/ || - (("end" =~ /^\Q$command/ || "exit" =~ /^\Q$command/) && $command ne "e")) { # check 1 letter command: 'email', 'end' or 'exit'?\n"; - printf "quit/end/exit\n"; - printf " Fin du programme d'administration.\n"; - } else { - if ($receivedcommand ne "") { - printf "Commande inconnue [%s] pour l'aide. Affichage de toutes les commandes.\n", $receivedcommand; - } - print << "ENDOFAIDE"; - aide/help/? -- Affiche cet aide - aide/help/? [commande] -- Affiche l'aide de la commande - add <nomcompte> <sexe> <motdepasse> -- Crée un compte (sans email) - ban/banish aaaa/mm/jj hh:mm:ss <nomcompte>-- Change la date finale de banismnt - banadd/ba <nomcompte> <modificateur> -- Ajout/soustrait du temps à la - exemple: ba moncompte +1m-2mn1s-2y date finale de banissement - banset/bs <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la date fin de banisemnt - banset/bs <nomcompte> 0 -- Dé-banis un compte. - block <nom compte> -- Mets le status d'un compte à 5 (blocked by the GM Team) - check <nomcompte> <motdepasse> -- Vérifie un mot de passe d'un compte - create <nomcompte> <sexe> <email> <motdepasse> -- Crée un compte (avec email) - del <nomcompte> -- Supprime un compte - email <nomcompte> <email> -- Modifie l'e-mail d'un compte - getcount -- Donne le nb de joueurs en ligne - gm <nomcompte> [Niveau_GM] -- Modifie le niveau de GM d'un compte - id <nomcompte> -- Donne l'id d'un compte - info <idcompte> -- Affiche les infos sur un compte - kami <message> -- Envoi un message général (en jaune) - kamib <message> -- Envoi un message général (en bleu) - language <langue> -- Change la langue d'affichage. - list/ls [Premier_id [Dernier_id] ] -- Affiche une liste de comptes - listBan/lsBan [Premier_id [Dernier_id] ]-- Affiche une liste de comptes - avec un statut ou bannis - listGM/lsGM [Premier_id [Dernier_id] ] -- Affiche une liste de comptes GM - listOK/lsOK [Premier_id [Dernier_id] ] -- Affiche une liste de comptes - sans status et non bannis - memo <nomcompte> <memo> -- Modifie le memo d'un compte - name <idcompte> -- Donne le nom d'un compte - passwd <nomcompte> <nouveaumotdepasse> -- Change le mot de passe d'un compte - quit/end/exit -- Fin du programme d'administation - reloadGM -- Recharger le fichier de config des GM - search <expression> -- Cherche des comptes - search -e/-r/--expr/--regex <expression> -- Cherche des comptes par REGEX - sex <nomcompte> <sexe> -- Modifie le sexe d'un compte - state <nomcompte> <nouveaustatut> <messageerr7> -- Change le statut d'1 compte - timeadd/ta <nomcompte> <modificateur> -- Ajout/soustrait du temps à la - exemple: ta moncompte +1m-2mn1s-2y limite de validité - timeset/ts <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la limite de validité - timeset/ts <nomcompte> 0 -- limite de validité = illimitée - unban/unbanish <nom compte> -- Ote le banissement d'un compte - unblock <nom compte> -- Mets le status d'un compte à 0 (Compte ok) - version -- Donne la version du login-serveur - who <nomcompte> -- Affiche les infos sur un compte -ENDOFAIDE - printf(" Note: Pour les noms de compte avec des espaces, tapez \"<nom compte>\" (ou ').\n"); - } - } else { - if ("aide" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'? - printf "aide/help/?\n"; - printf " Display the description of the commands\n"; - printf "aide/help/? [command]\n"; - printf " Display the description of the specified command\n"; - } elsif ("help" =~ /^\Q$command/) { - printf "aide/help/?\n"; - printf " Display the description of the commands\n"; - printf "aide/help/? [command]\n"; - printf " Display the description of the specified command\n"; - } elsif ("add" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'? - printf "add <account_name> <sex> <password>\n"; - printf " Create an account with the default email (a\@a.com).\n"; - printf " Concerning the sex, only the first letter is used (F or M).\n"; - printf " The e-mail is set to a\@a.com (default e-mail). It's like to have no e-mail.\n"; - printf " When the password is omitted,\n"; - printf " the input is done without displaying of the pressed keys.\n"; - printf " <example> add testname Male testpass\n"; - } elsif ($command eq "ban" || ("banish" =~ /^\Q$command/ && length($command) >= 4)) { - printf "ban/banish yyyy/mm/dd hh:mm:ss <account_name>\n"; - printf " Changes the final date of a banishment of an account.\n"; - printf " The difference with banset is the position of the account name.\n"; - } elsif (("banadd" =~ /^\Q$command/ || $command eq "ba") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'? - printf "banadd <account_name> <modifier>\n"; - printf " Adds or substracts time from the final date of a banishment of an account.\n"; - printf " Modifier is done as follows:\n"; - printf " Adjustment value (-1, 1, +1, etc...)\n"; - printf " Modified element:\n"; - printf " a or y: year\n"; - printf " m: month\n"; - printf " j or d: day\n"; - printf " h: hour\n"; - printf " mn: minute\n"; - printf " s: second\n"; - printf " <example> banadd testname +1m-2mn1s-6y\n"; - printf " this example adds 1 month and 1 second, and substracts 2 minutes\n"; - printf " and 6 years at the same time.\n"; - printf "NOTE: If you modify the final date of a non-banished account,\n"; - printf " you fix the final date to (actual time +- adjustments)\n"; - } elsif (("banset" =~ /^\Q$command/ || $command eq "bs") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'? - printf "banset <account_name> yyyy/mm/dd [hh:mm:ss]\n"; - printf " Changes the final date of a banishment of an account.\n"; - printf " Default time: 23:59:59\n"; - printf "banset <account_name> 0\n"; - printf " Set a non-banished account (0 = unbanished).\n"; - } elsif ("block" =~ /^\Q$command/ && length($command) >= 2) { - printf "block <account name>\n"; - printf " Set state 5 (You have been blocked by the GM Team) to an account.\n"; - printf " Same command of state <account_name> 5.\n"; - } elsif ("check" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'? - printf "check <account_name> <password>\n"; - printf " Check the validity of a password for an account.\n"; - printf " NOTE: Server will never sends back a password.\n"; - printf " It's the only method you have to know if a password is correct.\n"; - printf " The other method is to have a ('physical') access to the accounts file.\n"; - } elsif ("create" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'? - printf "create <account_name> <sex> <email> <password>\n"; - printf " Like the 'add' command, but with e-mail moreover.\n"; - printf " <example> create testname Male my\@mail.com testpass\n"; - } elsif ("del" =~ /^\Q$command/ || "delete" =~ /^\Q$command/) { - printf "del <account_name>\n"; - printf " Remove an account.\n"; - printf " This order requires confirmation. After confirmation, the account is deleted.\n"; - } elsif ("email" =~ /^\Q$command/ && $command ne "e") { # check 1 letter command: 'email', 'end' or 'exit'? - printf "email <account_name> <email>\n"; - printf " Modify the e-mail of an account.\n"; - } elsif ("getcount" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'? - printf "getcount\n"; - printf " Give the number of players online on all char-servers.\n"; - } elsif ("gm" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'? - printf "gm <account_name> [GM_level]\n"; - printf " Modify the GM level of an account.\n"; - printf " Default value remove GM level (GM level = 0).\n"; - printf " <example> gm testname 80\n"; - } elsif ("id" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'? - printf "id <account_name>\n"; - printf " Give the id of an account.\n"; - } elsif ("info" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'? - printf "info <account_id>\n"; - printf " Display complete information of an account.\n"; - } elsif ($command eq "kami") { # check all letters command: 'kami' or 'kamib'? - printf "kami <message>\n"; - printf " Sends a broadcast message on all map-server (in yellow).\n"; - } elsif ($command eq "kamib") { # check all letters command: 'kami' or 'kamib'? - printf "kamib <message>\n"; - printf " Sends a broadcast message on all map-server (in blue).\n"; - } elsif ("language" =~ /^\Q$command/ && $command ne "l") { # check 1 letter command: 'list' or 'language'? - printf("language <language>\n"); - printf(" Change the language of displaying.\n"); - printf(" Possible languages: Français or English.\n"); - } elsif (("list" =~ /^\Q$command/ || $command eq "ls") && $command ne "l") { # check 1 letter command: 'list' or 'language'? - printf "list/ls [start_id [end_id]]\n"; - printf " Display a list of accounts.\n"; - printf " 'start_id', 'end_id': indicate end and start identifiers.\n"; - printf " Research by name is not possible with this command.\n"; - printf " <example> list 10 9999999\n"; - } elsif (("listban" =~ /^\Q$command/ || $command eq "lsban") && $command ne "l") { # need to specificaly write Ban to have this list # check 1 letter command: 'list' or 'language'? - printf "listBan/lsBan [start_id [end_id]]\n"; - printf " Like list/ls, but only for accounts with state or banished.\n"; - } elsif (("listgm" =~ /^\Q$command/ || $command eq "lsgm") && $command ne "l") { # need to specificaly write GM to have this list # check 1 letter command: 'list' or 'language'? - printf "listGM/lsGM [start_id [end_id]]\n"; - printf " Like list/ls, but only for GM accounts.\n"; - } elsif (("listok" =~ /^\Q$command/ || $command eq "lsok") && $command ne "l") { # need to specificaly write OK to have this list # check 1 letter command: 'list' or 'language'? - printf "listOK/lsOK [start_id [end_id]]\n"; - printf " Like list/ls, but only for accounts without state and not banished.\n"; - } elsif ("memo" =~ /^\Q$command/) { - printf "memo <account_name> <memo>\n"; - printf " Modify the memo of an account.\n"; - printf " 'memo': it can have until 253 characters (with spaces or not).\n"; - } elsif ("name" =~ /^\Q$command/) { - printf "name <account_id>\n"; - printf " Give the name of an account.\n"; - } elsif ("passwd" =~ /^\Q$command/ || "password" =~ /^\Q$command/) { - printf "passwd <account_name> <new_password>\n"; - printf " Change the password of an account.\n"; - printf " When new password is omitted,\n"; - printf " the input is done without displaying of the pressed keys.\n"; - } elsif ("reloadgm" =~ /^\Q$command/) { - printf "reloadGM\n"; - printf " Reload GM configuration file\n"; - } elsif ("search" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'? - $command ne "se") { # check 2 letters command: 'search' or 'sex'? - printf "search <expression>\n"; - printf " Seek accounts.\n"; - printf " Displays the accounts whose names correspond.\n"; - printf "search -r/-e/--expr/--regex <expression>\n"; - printf " Seek accounts by regular expression.\n"; - printf " Displays the accounts whose names correspond.\n"; - } elsif ("sex" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'? - $command ne "se") { # check 2 letters command: 'search' or 'sex'? - printf "sex <account_name> <sex>\n"; - printf " Modify the sex of an account.\n"; - printf " <example> sex testname Male\n"; - } elsif ("state" =~ /^\Q$command/ && $command ne "s") { # check 1 letter command: 'search', 'state' or 'sex'? - printf "state <account_name> <new_state> <error_message_#7>\n"; - printf " Change the state of an account.\n"; - printf " 'new_state': state is the state of the packet 0x006a + 1.\n"; - printf " The possibilities are:\n"; - printf " 0 = Account ok\n"; - printf " 1 = Unregistered ID\n"; - printf " 2 = Incorrect Password\n"; - printf " 3 = This ID is expired\n"; - printf " 4 = Rejected from Server\n"; - printf " 5 = You have been blocked by the GM Team\n"; - printf " 6 = Your Game's EXE file is not the latest version\n"; - printf " 7 = You are Prohibited to log in until...\n"; - printf " 8 = Server is jammed due to over populated\n"; - printf " 9 = No MSG\n"; - printf " 100 = This ID has been totally erased\n"; - printf " all other values are 'No MSG', then use state 9 please.\n"; - printf " 'error_message_#7': message of the code error 6\n"; - printf " = Your are Prohibited to log in until... (packet 0x006a)\n"; - } elsif (("timeadd" =~ /^\Q$command/ || $command eq "ta") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'? - printf "timeadd <account_name> <modifier>\n"; - printf " Adds or substracts time from the validity limit of an account.\n"; - printf " Modifier is done as follows:\n"; - printf " Adjustment value (-1, 1, +1, etc...)\n"; - printf " Modified element:\n"; - printf " a or y: year\n"; - printf " m: month\n"; - printf " j or d: day\n"; - printf " h: hour\n"; - printf " mn: minute\n"; - printf " s: second\n"; - printf " <example> timeadd testname +1m-2mn1s-6y\n"; - printf " this example adds 1 month and 1 second, and substracts 2 minutes\n"; - printf " and 6 years at the same time.\n"; - printf "NOTE: You can not modify a unlimited validity limit.\n"; - printf " If you want modify it, you want probably create a limited validity limit.\n"; - printf " So, at first, you must set the validity limit to a date/time.\n"; - } elsif (("timeset" =~ /^\Q$command/ || $command eq "ts") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'? - printf "timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n"; - printf " Changes the validity limit of an account.\n"; - printf " Default time: 23:59:59\n"; - printf "timeset <account_name> 0\n"; - printf " Gives an unlimited validity limit (0 = unlimited).\n"; - } elsif ($command eq "unban" || ("unbanish" =~ /^\Q$command/ && length($command) >= 4)) { - printf "unban/unbanish <account name>\n"; - printf " Remove the banishment of an account.\n"; - printf " This command works like banset <account_name> 0.\n"; - } elsif ("unblock" =~ /^\Q$command/ && length($command) >= 4) { - printf "unblock <account name>\n"; - printf " Set state 0 (Account ok) to an account.\n"; - printf " This command works like state <account_name> 0.\n"; - } elsif ("version" =~ /^\Q$command/) { - printf "version\n"; - printf " Display the version of the login-server.\n"; - } elsif ("who" =~ /^\Q$command/) { - printf "who <account_name>\n"; - printf " Displays complete information of an account.\n"; - } elsif ("quit" =~ /^\Q$command/ || - (("end" =~ /^\Q$command/ || "exit" =~ /^\Q$command/) && $command ne "e")) { # check 1 letter command: 'email', 'end' or 'exit'?\n"; - printf "quit/end/exit\n"; - printf " End of the program of administration.\n"; - } else { - if ($receivedcommand ne "") { - printf "Unknown command [%s] for help. Displaying of all commands.\n", $receivedcommand; - } - print << "ENDOFHELP"; - aide/help/? -- Display this help - aide/help/? [command] -- Display the help of the command - add <account_name> <sex> <password> -- Create an account with default email - ban/banish yyyy/mm/dd hh:mm:ss <account_name> -- Change final date of a ban - banadd/ba <account_name> <modifier> -- Add or substract time from the final - example: ba apple +1m-2mn1s-2y date of a banishment of an account - banset/bs <account_name> yyyy/mm/dd [hh:mm:ss] -- Change final date of a ban - banset/bs <account_name> 0 -- Un-banish an account - block <account name> -- Set state 5 (blocked by the GM Team) to an account - check <account_name> <password> -- Check the validity of a password - create <account_name> <sex> <email> <passwrd> -- Create an account with email - del <account_name> -- Remove an account - email <account_name> <email> -- Modify an email of an account - getcount -- Give the number of players online - gm <account_name> [GM_level] -- Modify the GM level of an account - id <account_name> -- Give the id of an account - info <account_id> -- Display all information of an account - kami <message> -- Sends a broadcast message (in yellow) - kamib <message> -- Sends a broadcast message (in blue) - language <language> -- Change the language of displaying. - list/ls [First_id [Last_id]] -- Display a list of accounts - listBan/lsBan [First_id [Last_id]] -- Display a list of accounts - with state or banished - listGM/lsGM [First_id [Last_id]] -- Display a list of GM accounts - listOK/lsOK [First_id [Last_id]] -- Display a list of accounts - without state and not banished - memo <account_name> <memo> -- Modify the memo of an account - name <account_id> -- Give the name of an account - passwd <account_name> <new_password> -- Change the password of an account - quit/end/exit -- End of the program of administation - reloadGM -- Reload GM configuration file - search <expression> -- Seek accounts - search -e/-r/--expr/--regex <expressn> -- Seek accounts by regular-expression - sex <nomcompte> <sexe> -- Modify the sex of an account - state <account_name> <new_state> <error_message_#7> -- Change the state - timeadd/ta <account_name> <modifier> -- Add or substract time from the - example: ta apple +1m-2mn1s-2y validity limit of an account - timeset/ts <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit - timeset/ts <account_name> 0 -- Give a unlimited validity limit - unban/unbanish <account name> -- Remove the banishment of an account - unblock <account name> -- Set state 0 (Account ok) to an account - version -- Gives the version of the login-server - who <account_name> -- Display all information of an account -ENDOFHELP - printf(" Note: To use spaces in an account name, type \"<account name>\" (or ').\n"); - } - } - - return 0; -} -#-------------------------------------------------------------------------- - -# Sub-function: Displaying of the accounts list -sub listaccount() { - my($st, $ed, $listflag) = @_; - my($i); - my($n) = (0); - # 0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567 - if ($defaultlanguage eq "F") { - print " id_compte GM nom_utilisateur sexe count statut\n"; - } else { - print "account_id GM user_name sex count state\n"; - } - print "-------------------------------------------------------------------------------\n"; - while(1) { - print $so pack("vV2", 0x7920, $st, $ed); - $so->flush(); - $buf = readso(4); - if (unpack("v", $buf) != 0x7921) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - exit(10); - } - my($len) = unpack("x2v", $buf); - last if ($len <= 4); - for($i = 4; $i < $len; $i += 38) { - my(@dat) = unpack("VCa24cVV", readso(38)); - $st = $dat[0] + 1; - if ($listflag == 0 || - ($listflag == 1 && $dat[1] > 0) || # check GM flag - ($listflag == 3 && $dat[5] != 0) || # check with state or banished - ($listflag == 4 && $dat[5] == 0)) { # check without state and not banished - printf "%10d %2s %-24s%-5s %6d %-27s\n", $dat[0], - ($dat[1] == 0 ? " " : $dat[1]), - $dat[2], - ($defaultlanguage eq "F" ? ("Femme","Male","Servr")[$dat[3]] : ("Femal","Male","Servr")[$dat[3]]), - $dat[4], - (($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"), - "Unregistered ID", - "Incorrect Password", - "This ID is expired", - "Rejected from Server", - "Blocked by the GM Team", # You have been blocked by the GM Team - "Your EXE file is too old", # Your Game's EXE file is not the latest version - "Banishement or\n Prohibited to login until %s", # You are Prohibited to log in until %s - "Server is over populated", # Server is jammed due to over populated - "No MSG", - "This ID is totally erased")[$dat[5] == 100 ? 10 : $dat[5]]; # This ID has been totally erased - $n++; - } - } - } - if ($defaultlanguage eq "F") { - if ($n == 0) { - print "Aucun compte trouvé.\n"; - } elsif ($n == 1) { - print "1 compte trouvé.\n"; - } else { - print "$n comptes trouvés.\n"; - } - } else { - if ($n == 0) { - print "No account found.\n"; - } elsif ($n == 1) { - print "1 account found.\n"; - } else { - print "$n accounts found.\n"; - } - } - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: add an account with the default e-mail -sub addaccount() { - my($userid, $sex, $passwd) = @_; - if ($userid eq "" || !defined($userid)) { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple> add nomtest Male motdepassetest\n"; - } else { - print "Please input an account name.\n"; - print "<example> add testname Male testpass\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } -# if ($userid =~ /[^A-Za-z0-9\@-_]/) { -# if ($defaultlanguage eq "F") { -# print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n"; -# } else { -# print "Illegal character found in the account name ".$`."[${&}]${'}\n"; -# } -# return 101; -# } - $sex = uc(substr($sex, 0, 1)); - if ($sex !~ /^[MF]$/) { - if ($defaultlanguage eq "F") { - print "Sexe incorrect [$sex]. Entrez M ou F svp.\n"; - } else { - print "Illegal gender [$sex]. Please input M or F.\n"; - } - return 103; - } - if ($passwd eq "") { - return 108 if (($passwd = typepasswd()) eq ""); - } - if (verify_password($passwd) == 0) { - return 104; - } - print $so pack("va24a24a1a40", 0x7930, $userid, $passwd, $sex, ""); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x7931) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 106; - } - $buf = readso(28); - if (unpack("V", $buf) == -1 || unpack("V", $buf) == 4294967295) { - if ($defaultlanguage eq "F") { - print "Echec à la création du compte [$userid]. Un compte identique existe déjà.\n"; - } else { - print "Account [$userid] creation failed. Same account already exists.\n"; - } - return 107; - } else { - if ($defaultlanguage eq "F") { - printf "Compte [$userid] créé avec succès [id: %d].\n", unpack("V",$buf); - } else { - printf "Account [$userid] is successfully created [id: %d].\n", unpack("V",$buf); - } - } - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: add an account with an e-mail -sub createaccount() { - my($userid, $sex, $email, $passwd) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple> create nomtest Male mon\@email.com motdepassetest\n"; - } else { - print "Please input an account name.\n"; - print "<example> create testname Male my\@mail.com testpass\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } -# if ($userid =~ /[^A-Za-z0-9\@-_]/) { -# if ($defaultlanguage eq "F") { -# print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n"; -# } else { -# print "Illegal character found in the account name ".$`."[${&}]${'}\n"; -# } -# return 101; -# } - $sex = uc(substr($sex, 0, 1)); - if ($sex !~ /^[MF]$/) { - if ($defaultlanguage eq "F") { - print "Sexe incorrect [$sex]. Entrez M ou F svp.\n"; - } else { - print "Illegal gender [$sex]. Please input M or F.\n"; - } - return 103; - } - if (length($email) < 3) { - if ($defaultlanguage eq "F") { - print "Email trop courte [$email]. Entrez une e-mail valide svp.\n"; - } else { - print "Email is too short [$email]. Please input a valid e-mail.\n"; - } - return 109; - } - if (length($email) > 39) { - if ($defaultlanguage eq "F") { - print "Email trop longue [$email]. Entrez une e-mail de 39 caractères maximum svp.\n"; - } else { - print "Email is too long [$email]. Please input an e-mail with 39 bytes at the most.\n"; - } - return 109; - } - if (verify_email($email) == 0) { - if ($defaultlanguage eq "F") { - print "Email incorrecte [$email]. Entrez une e-mail valide svp.\n"; - } else { - print "Invalid email [$email]. Please input a valid e-mail.\n"; - } - return 109; - } - if ($passwd eq "") { - return 108 if (($passwd = typepasswd()) eq ""); - } - if (verify_password($passwd) == 0) { - return 104; - } - print $so pack("va24a24a1a40", 0x7930, $userid, $passwd, $sex, $email); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x7931) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 106; - } - $buf = readso(28); - if (unpack("V", $buf) == -1 || unpack("V", $buf) == 4294967295) { - if ($defaultlanguage eq "F") { - print "Echec à la création du compte [$userid]. Un compte identique existe déjà.\n"; - } else { - print "Account [$userid] creation failed. Same account already exists.\n"; - } - return 107; - } else { - if ($defaultlanguage eq "F") { - printf "Compte [$userid] créé avec succès [id: %d].\n", unpack("V",$buf); - } else { - printf "Account [$userid] is successfully created [id: %d].\n", unpack("V",$buf); - } - } - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: deletion of an account -sub delaccount() { - my($userid) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple> del nomtestasupprimer\n"; - } else { - print "Please input an account name.\n"; - print "<example> del testnametodelete\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - if ($defaultlanguage eq "F") { - print "** Etes-vous vraiment sûr de vouloir SUPPRIMER le compte [$userid]? (o/n) "; - } else { - print "** Are you really sure to DELETE account [$userid]? (y/n) "; - } - if (lc(substr(<STDIN>, 0, 1)) !~ /[oy]/) { - if ($defaultlanguage eq "F") { - print "Suppression annulée\n."; - } else { - print "Deletion canceled\n"; - } - return 121; - } - print $so pack("va24", 0x7932, $userid); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x7933) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 122; - } - $buf = readso(28); - my($id2, $name) = unpack("Va24", $buf); - while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) { - chop($name); - }; - if ($id2 == -1 || $id2 == 4294967295) { - if ($defaultlanguage eq "F") { - print "Echec de la suppression du compte [$userid]. Le compte n'existe pas.\n"; - } else { - print "Account [$userid] deletion failed. Account doesn't exist.\n"; - } - return 123; - } else { - if ($defaultlanguage eq "F") { - print "Compte [$name][id: $id2] SUPPRIME avec succès.\n"; - } else { - print "Account [$name][id: $id2] is successfully DELETED.\n"; - } - } - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: modification of a password -sub changepasswd() { - my($userid, $passwd) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple> passwd nomtest nouveaumotdepasse\n"; - } else { - print "Please input an account name.\n"; - print "<example> passwd testname newpassword\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - if ($passwd eq "") { - return 134 if (($passwd = typepasswd()) eq ""); - } - if (verify_password($passwd) == 0) { - return 131; - } - print $so pack("va24a24", 0x7934, $userid,$passwd); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x7935) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 132; - } - $buf = readso(28); - my($id2, $name) = unpack("Va24", $buf); - while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) { - chop($name); - }; - if ($id2 == -1 || $id2 == 4294967295) { - if ($defaultlanguage eq "F") { - print "Echec de la modification du mot de passe du compte [$userid].\n"; - print "Le compte [$userid] n'existe pas.\n"; - } else { - print "Account [$userid] password changing failed.\n"; - print "Account [$userid] doesn't exist.\n"; - } - return 133; - } else { - if ($defaultlanguage eq "F") { - print "Modification du mot de passe du compte [$name][id: $id2] réussie.\n"; - } else { - print "Account [$name][id: $id2] password successfully changed.\n"; - } - } - return 130; -} - -#-------------------------------------------------------------------------- - -# Sub-function: modification of an account e-mail -sub changeemail() { - my($userid, $email) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple> email testname nouveauemail\n"; - } else { - print "Please input an account name.\n"; - print "<example> email testname newemail\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - if (length($email) < 3) { - if ($defaultlanguage eq "F") { - print "Email trop courte [$email]. Entrez une e-mail valide svp.\n"; - } else { - print "Email is too short [$email]. Please input a valid e-mail.\n"; - } - return 109; - } - if (length($email) > 39) { - if ($defaultlanguage eq "F") { - print "Email trop longue [$email]. Entrez une e-mail de 39 caractères maximum svp.\n"; - } else { - print "Email is too long [$email]. Please input an e-mail with 39 bytes at the most.\n"; - } - return 109; - } - if (verify_email($email) == 0) { - if ($defaultlanguage eq "F") { - print "Email incorrect [$email]. Entrez une e-mail valide svp.\n"; - } else { - print "Invalid email [$email]. Please input a valid e-mail.\n"; - } - return 109; - } - print $so pack("va24a40", 0x7940, $userid, $email); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x7941) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 162; - } - $buf = readso(28); - my($id2, $name) = unpack("Va24", $buf); - while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) { - chop($name); - }; - if ($id2 == -1 || $id2 == 4294967295) { - if ($defaultlanguage eq "F") { - print "Echec de la modification de l'e-mail du compte [$userid].\n"; - print "Le compte [$userid] n'existe pas.\n"; - } else { - print "Account [$userid] e-mail changing failed.\n"; - print "Account [$userid] doesn't exist.\n"; - } - return 133; - } else { - if ($defaultlanguage eq "F") { - print "Modification de l'e-mail du compte [$name][id: $id2] réussie.\n"; - } else { - print "Account [$name][id: $id2] e-mail successfully changed.\n"; - } - } - return 160; -} - -#-------------------------------------------------------------------------- - -# Sub-function: search of accounts -sub searchaccount() { - my($p1, $p2) = @_; - my($exp) = (""); - if ($p1 eq "-e" || $p1 eq "-r" || $p1 eq "--regex" || $p1 eq "--expr") { - if ($p2 eq "") { - if ($defaultlanguage eq "F") { - print "Entrez une expression régulière ou utilisez 'ls' pour avoir tous les comptes.\n"; - } else { - print "Input a regular expression or use 'ls' to obtain all accounts.\n"; - } - return 141; - } - $exp = $p2; - } else { - if ($p1 eq "") { - if ($defaultlanguage eq "F") { - print "Entrez une chaîne ou utilisez 'ls' pour avoir tous les comptes.\n"; - } else { - print "Input a string or use 'ls' to obtain all accounts.\n"; - } - return 141; - } - my($c) = 0; - $exp = lc($p1); - $exp =~ s/([\@])/\\$1/g; - $c += $exp =~ s/([\-\[\]])/\\$1/g; - $c += $exp =~ s/([\*\?])/.$1/g; - $c += $exp =~ s/\\\[(.)\\\-(.)\\\]/[$1-$2]/g; - $exp = "^$exp\$" if $c; - } - if (eval{ "" =~ /$exp/; }, $@) { - if ($defaultlanguage eq "F") { - print "Expression régulière non reconnue.\n"; - } else { - print "Regular-Expression compiling failed.\n"; - } - return 141; - } - my($i); - my($n, $st) = (0, 0); - # 0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567 - if ($defaultlanguage eq "F") { - print " id_compte GM nom_utilisateur sexe count statut\n"; - } else { - print "account_id GM user_name sex count state\n"; - } - print "-------------------------------------------------------------------------------\n"; - while(1) { - print $so pack("vV2", 0x7920, $st, 0); - $so->flush(); - $buf = readso(4); - if (unpack("v", $buf) != 0x7921) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - exit(10); - } - my($len) = unpack("x2v", $buf); - last if ($len <= 4); - for($i = 4; $i < $len; $i += 38) { - my(@dat) = unpack("VCa24cVV", readso(38)); - $st = $dat[0] + 1; - next if (lc($dat[2]) !~ /$exp/); - printf "%10d %2s %-24s%-5s %6d %-27s\n", $dat[0], - ($dat[1] == 0 ? " " : $dat[1]), - $dat[2], - ($defaultlanguage eq "F" ? ("Femme","Male","Servr")[$dat[3]] : ("Femal","Male","Servr")[$dat[3]]), - $dat[4], - (($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"), - "Unregistered ID", - "Incorrect Password", - "This ID is expired", - "Rejected from Server", - "Blocked by the GM Team", # You have been blocked by the GM Team - "Your EXE file is too old", # Your Game's EXE file is not the latest version - "Banishement or\n Prohibited to login until %s", # You are Prohibited to log in until %s - "Server is over populated", # Server is jammed due to over populated - "No MSG", - "This ID is totally erased")[$dat[5] == 100 ? 10 : $dat[5]]; # This ID has been totally erased - $n++; - } - } - if ($defaultlanguage eq "F") { - if ($n == 0) { - print "Aucun compte trouvé.\n"; - } elsif ($n == 1) { - print "1 compte trouvé.\n"; - } else { - print "$n comptes trouvés.\n"; - } - } else { - if ($n == 0) { - print "No account found.\n"; - } elsif ($n == 1) { - print "1 account found.\n"; - } else { - print "$n accounts found.\n"; - } - } - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: modify the sex of an account -sub changesex() { - my($userid, $sex) = @_; - if ($userid eq "" || !defined($userid)) { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple> sex nomtest Male\n"; - } else { - print "Please input an account name.\n"; - print "<example> sex testname Male\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } -# if ($userid =~ /[^A-Za-z0-9\@-_]/) { -# if ($defaultlanguage eq "F") { -# print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n"; -# } else { -# print "Illegal character found in the account name ".$`."[${&}]${'}\n"; -# } -# return 101; -# } - $sex = uc(substr($sex, 0, 1)); - if ($sex !~ /^[MF]$/) { - if ($defaultlanguage eq "F") { - print "Sexe incorrect [$sex]. Entrez M ou F svp.\n"; - } else { - print "Illegal gender [$sex]. Please input M or F.\n"; - } - return 103; - } - print $so pack("va24a1", 0x793c, $userid, $sex); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x793d) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 152; - } - $buf = readso(28); - my($id2, $name) = unpack("Va24", $buf); - while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) { - chop($name); - }; - if ($id2 == -1 || $id2 == 4294967295) { - if ($defaultlanguage eq "F") { - print "Echec du changement du sexe du compte [$userid].\n"; - print "Le compte n'existe pas ou le sexe est déjà celui demandé.\n"; - } else { - print "Account [$userid] sex changing failed.\n"; - print "Account doesn't exist or the sex is already the good sex.\n"; - } - } else { - if ($defaultlanguage eq "F") { - print "Sexe du compte [$name][id: $id2] changé avec succès.\n"; - } else { - print "Account [$name][id: $id2] sex successfully changed.\n"; - } - } - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: modify the GM level of an account -sub changegmlevel() { - my($userid, $gm_level) = @_; - if ($userid eq "" || !defined($userid)) { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple> gm nomtest 80\n"; - } else { - print "Please input an account name.\n"; - print "<example> gm testname 80\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } -# if ($userid =~ /[^A-Za-z0-9\@-_]/) { -# if ($defaultlanguage eq "F") { -# print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n"; -# } else { -# print "Illegal character found in the account name ".$`."[${&}]${'}\n"; -# } -# return 101; -# } - $gm_level = int($gm_level); - if ($gm_level < 0 || $gm_level > 99) { - if ($defaultlanguage eq "F") { - print "Niveau de GM incorrect [$gm_level]. Entrez une valeur de 0 à 99 svp.\n"; - } else { - print "Illegal GM level [$gm_level]. Please input a value from 0 to 99.\n"; - } - return 103; - } - print $so pack("va24C", 0x793e, $userid, $gm_level); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x793f) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 152; - } - $buf = readso(28); - my($id2, $name) = unpack("Va24", $buf); - while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) { - chop($name); - }; - if ($id2 == -1 || $id2 == 4294967295) { - if ($defaultlanguage eq "F") { - print "Echec du changement du niveau de GM du compte [$userid].\n"; - print "Le compte n'existe pas, le niveau de GM est déjà celui demandé,\n"; - print "ou il est impossible de modifier le fichier des comptes GM.\n"; - } else { - print "Account [$userid] GM level changing failed.\n"; - print "Account doesn't exist, the GM level is already the good GM level,\n"; - print "or it's impossible to modify the GM accounts file.\n"; - } - } else { - if ($defaultlanguage eq "F") { - print "Niveau de GM du compte [$name][id: $id2] changé avec succès.\n"; - } else { - print "Account [$name][id: $id2] GM level successfully changed.\n"; - } - } - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Modification of a state -sub changestate { - my($userid, $s, $error_message) = @_; - # Valid values: 0: ok, or value of the 0x006a packet + 1 - if ($s eq "" || (($s < 0 || $s > 9) && $s != 100)) { - if ($defaultlanguage eq "F") { - print "Entrez une des valeurs suivantes svp:\n"; - print " 0 = Compte ok 6 = Your Game's EXE file is not the latest version\n"; - } else { - print "Please input one of these values:\n"; - print " 0 = Account ok 6 = Your Game's EXE file is not the latest version\n"; - } - print " 1 = Unregistered ID 7 = You are Prohibited to log in until %s\n"; - print " 2 = Incorrect Password 8 = Server is jammed due to over populated\n"; - print " 3 = This ID is expired 9 = No MSG\n"; - print " 4 = Rejected from Server 100 = This ID has been totally erased\n"; - print " 5 = You have been blocked by the GM Team\n"; - if ($defaultlanguage eq "F") { - print "<exemples> state nomtest 5\n"; - print " state nomtest 7 fin de votre ban\n"; - print " block <nom du compte>\n"; - print " unblock <nom du compte>\n"; - } else { - print "<examples> state testname 5\n"; - print " state testname 7 end of your ban\n"; - print " block <account name>\n"; - print " unblock <account name>\n"; - } - return 151; - } - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemples> state nomtest 5\n"; - print " state nomtest 7 fin de votre ban\n"; - print " block <nom du compte>\n"; - print " unblock <nom du compte>\n"; - } else { - print "Please input an account name.\n"; - print "<examples> state testname 5\n"; - print " state testname 7 end of your ban\n"; - print " block <account name>\n"; - print " unblock <account name>\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - if ($s != 7) { - $error_message = "-"; - } else { - if (length($error_message) < 1) { - if ($defaultlanguage eq "F") { - print "Message d'erreur trop court. Entrez un message de 1-19 caractères.\n"; - } else { - print "Error message is too short. Please input a message of 1-19 bytes.\n"; - } - return 102; - } - if (length($error_message) > 19) { - if ($defaultlanguage eq "F") { - print "Message d'erreur trop long. Entrez un message de 1-19 caractères.\n"; - } else { - print "Error message is too long. Please input a message of 1-19 bytes.\n"; - } - return 102; - } - } - print $so pack("va24Va20", 0x7936, $userid, $s, $error_message); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x7937) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 152; - } - $buf = readso(32); - my(@dat) = unpack("Va24V", $buf); - while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) { - chop($dat[1]); - }; - if ($dat[0] != -1 && $dat[0] != 4294967295) { - if ($defaultlanguage eq "F") { - print "Statut du compte [$dat[1]][id: $dat[0]] changé avec succès en ["; - } else { - print "Account [$dat[1]][id: $dat[0]] state successfully changed in ["; - } - print ((($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"), - "Unregistered ID", - "Incorrect Password", - "This ID is expired", - "Rejected from Server", - "You have been blocked by the GM Team", - "Your Game's EXE file is not the latest version", - "You are Prohibited to log in until %s", - "Server is jammed due to over populated", - "No MSG", - "This ID has been totally erased")[$dat[2] == 100 ? 10 : $dat[2]]); - print "].\n"; - } else { - if ($defaultlanguage eq "F") { - print "Echec du changement du statut du compte [$userid]. Le compte n'existe pas.\n"; - } else { - print "Account [$userid] state changing failed. Account doesn't exist.\n"; - } - } -} - -#-------------------------------------------------------------------------- - -# Sub-function: Displaying of the number of online players -sub getlogincount { - # Request to the login-server - print $so pack("v", 0x7938); - $so->flush(); - - $buf = readso(4); - # Connection failed - if (unpack("v", $buf) != 0x7939) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - exit(3); - } - - # Get length of the received packet - my($len) = unpack("x2v", $buf) - 4; - - # Read information of the servers - if ($len < 1) { - if ($defaultlanguage eq "F") { - printf " Aucun serveur n'est connecté au login serveur.\n"; - } else { - printf " No server is connected to the login-server.\n"; - } - } else { - my(@slist) = (); - for(; $len > 0; $len -= 32) { - my($name, $count) = unpack("x6 a20 V", readso(32)); - $name = substr($name, 0, index($name, "\0")); - push @slist, [ $name, $count ]; - } - # Displaying of result - my($i); - if ($defaultlanguage eq "F") { - printf " Nombre de joueurs en ligne (serveur: nb):\n"; - } else { - printf " Number of online players (server: number).\n"; - } - foreach $i(@slist) { - printf " %-20s : %5d\n", $i->[0], $i->[1]; - } - } -} - -#-------------------------------------------------------------------------- - -# Sub-function: Modification of a memo field -sub changememo { - my($userid, $memo) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple> memo nomtest nouveau memo\n"; - } else { - print "Please input an account name.\n"; - print "<example> memo testname new memo\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - if (length($memo) > 254) { - if ($defaultlanguage eq "F") { - print "Mémo trop long (".length($memo)." caractères).\n"; - print "Entrez un mémo de 254 caractères maximum svp.\n"; - } else { - print "Memo is too long (".length($memo)." characters).\n"; - print "Please input a memo of 254 bytes at the maximum.\n"; - } - return 102; - } - if (length($memo) == 0) { - print $so pack("va24v", 0x7942, $userid, 0); - } else { - print $so pack("va24va".length($memo), 0x7942, $userid, length($memo), $memo); - } - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x7943) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 152; - } - $buf = readso(28); - my($id2, $name) = unpack("Va24", $buf); - while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) { - chop($name); - }; - if ($id2 == -1 || $id2 == 4294967295) { - if ($defaultlanguage eq "F") { - print "Echec du changement du mémo du compte [$userid]. Le compte n'existe pas.\n"; - } else { - print "Account [$userid] memo changing failed. Account doesn't exist.\n"; - } - } else { - if ($defaultlanguage eq "F") { - print "Mémo du compte [$name][id: $id2] changé avec succès.\n"; - } else { - print "Account [$name][id: $id2] memo successfully changed.\n"; - } - } -} - -#-------------------------------------------------------------------------- - -# Sub-function: Request to obtain an account id -sub idaccount() { - my($userid) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple> id nomtest\n"; - } else { - print "Please input an account name.\n"; - print "<example> id testname\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - print $so pack("va24", 0x7944, $userid); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x7945) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 122; - } - $buf = readso(28); - my($id2, $name) = unpack("Va24", $buf); - while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) { - chop($name); - }; - if ($id2 == -1 || $id2 == 4294967295) { - if ($defaultlanguage eq "F") { - print "Impossible de trouver l'id du compte [$userid]. Le compte n'existe pas.\n"; - } else { - print "Unabled to find the account [$userid] id. Account doesn't exist.\n"; - } - return 123; - } else { - if ($defaultlanguage eq "F") { - print "Le compte [$name] a pour id: $id2.\n"; - } else { - print "The account [$name] have the id: $id2.\n"; - } - } - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Request to obtain an account name -sub nameaccount() { - my($id) = @_; - if ($id < 0) { - if ($defaultlanguage eq "F") { - print "Entrez un id ayant une valeur positive svp.\n"; - } else { - print "Please input a positive value for the id.\n"; - } - return 136; - } - print $so pack("vV", 0x7946, $id); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x7947) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 122; - } - $buf = readso(28); - my($id2, $name) = unpack("Va24", $buf); - while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) { - chop($name); - }; - if (length($name) == 0 || $name eq "") { - if ($defaultlanguage eq "F") { - print "Impossible de trouver le nom du compte [id: $id2]. Le compte n'existe pas.\n"; - } else { - print "Unabled to find the account [id: $id2] name. Account doesn't exist.\n"; - } - return 123; - } else { - if ($defaultlanguage eq "F") { - print "Le compte [id: $id2] a pour nom: $name.\n"; - } else { - print "The account [id: $id2] have the name: $name.\n"; - } - } - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Set a validity limit of an account -sub timesetaccount() { - my($userid, $date, $time) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple>: timeset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n"; - print " timeset <nom_du_compte> 0 (0 = illimité)\n"; - printf " Heure par défaut [hh:mm:ss]: 23:59:59\n"; - } else { - print "Please input an account name.\n"; - print "<example>: timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n"; - print " timeset <account_name> 0 (0 = unlimited)\n"; - printf " Default time [hh:mm:ss]: 23:59:59\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - my($year, $month, $day) = split(/[.\-\/]/, $date); - my($hour, $minute, $second) = split(/:/, $time); - if ($time eq "") { - $hour = 23; - $minute = 59; - $second = 59; - } - my($timestamp); - if ($year eq "" || - ($year != 0 && ($month eq "" || $day eq "" || $hour eq "" || $minute eq "" || $second eq ""))) { - if ($defaultlanguage eq "F") { - print "Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n"; - } else { - print "Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"; - } - return 102; - } - if ($year == 0) { - $timestamp = 0; - } else { - if ($year < 70) { - $year = $year + 100; - } - if ($year >= 1900) { - $year = $year - 1900; - } - if ($month < 1 || $month > 12) { - if ($defaultlanguage eq "F") { - print "Entrez un mois correct svp (entre 1 et 12).\n"; - } else { - print "Please give a correct value for the month (from 1 to 12).\n"; - } - return 102; - } - $month = $month - 1; - if ($day < 1 || $day > 31) { - if ($defaultlanguage eq "F") { - print "Entrez un jour correct svp (entre 1 et 31).\n"; - } else { - print "Please give a correct value for the day (from 1 to 31).\n"; - } - return 102; - } - if ((($month == 3 || $month == 5 || $month == 8 || $month == 10) && $day > 30) || - ($month == 1 && $day > 29)) { - if ($defaultlanguage eq "F") { - print "Entrez un jour correct en fonction du mois svp.\n"; - } else { - print "Please give a correct value for a day of this month.\n"; - } - return 102; - } - if ($hour < 0 || $hour > 23) { - if ($defaultlanguage eq "F") { - print "Entrez une heure correcte svp (entre 0 et 23).\n"; - } else { - print "Please give a correct value for the hour (from 0 to 23).\n"; - } - return 102; - } - if ($minute < 0 || $minute > 59) { - if ($defaultlanguage eq "F") { - print "Entrez des minutes correctes svp (entre 0 et 59).\n"; - } else { - print "Please give a correct value for the minutes (from 0 to 59).\n"; - } - return 102; - } - if ($second < 0 || $second > 59) { - if ($defaultlanguage eq "F") { - print "Entrez des secondes correctes svp (entre 0 et 59).\n"; - } else { - print "Please give a correct value for the seconds (from 0 to 59).\n"; - } - return 102; - } - $timestamp = POSIX::mktime($second, $minute, $hour, $day, $month, $year, 0, 0, -1); # -1: no winter/summer time modification - if ($timestamp == undef) { - if ($defaultlanguage eq "F") { - print "Date incorrecte.\n"; - print "Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n"; - } else { - print "Invalid date.\n"; - print "Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"; - } - return 102; - } - } - - print $so pack("va24V", 0x7948, $userid, $timestamp); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x7949) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 152; - } - $buf = readso(32); - my(@dat) = unpack("Va24V", $buf); - while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) { - chop($dat[1]); - }; - if ($dat[0] != -1 && $dat[0] != 4294967295) { - if ($defaultlanguage eq "F") { - print "Limite de validité du compte [$dat[1]][id: $dat[0]] changée avec succès ". - ($dat[2] == 0 ? "en [illimité].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2]))); - } else { - print "Validity Limit of the account [$dat[1]][id: $dat[0]] successfully changed ". - ($dat[2] == 0 ? "to [unlimited].\n" : "to be until ".(POSIX::ctime($dat[2]))); - } - # localtime($dat[2]) is also possible to display instead of POSIX::ctime. - } else { - if ($defaultlanguage eq "F") { - print "Echec du changement de la validité du compte [$userid]. Le compte n'existe pas.\n"; - } else { - print "Account [$userid] validity limit changing failed. Account doesn't exist.\n"; - } - } - - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Add/substract time to the validity limit of an account -sub timeaddaccount() { - my($userid, $modif) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print " <exemple> timeadd nomtest +1m-2mn1s-6y\n"; - print " Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"; - print " et 6 ans dans le même temps.\n"; - } else { - print "Please input an account name.\n"; - print " <example> timeadd testname +1m-2mn1s-6y\n"; - print " this example adds 1 month and 1 second, and substracts 2 minutes\n"; - print " and 6 years at the same time.\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - my($year, $month, $day) = (0, 0 ,0); - my($hour, $minute, $second) = (0, 0 ,0); - - $modif = lc($modif); - while (length($modif) > 0) { - my($value) = int($modif); - if ($value == 0) { - $modif = substr($modif, 1); - } else { - if (substr($modif, 0, 1) =~ /[\-\+]/) { - $modif = substr($modif, 1); - } - while (length($modif) > 0 && substr($modif, 0, 1) =~ /[0-9]/) { - $modif = substr($modif, 1); - } - if (index($modif, "s") == 0) { - $second = $value; - $modif = substr($modif, 1); - } elsif (index($modif, "mn") == 0) { - $minute = $value; - $modif = substr($modif, 2); - } elsif (index($modif, "h") == 0) { - $hour = $value; - $modif = substr($modif, 1); - } elsif (index($modif, "d") == 0 || index($modif, "j") == 0) { - $day = $value; - $modif = substr($modif, 1); - } elsif (index($modif, "m") == 0) { - $month = $value; - $modif = substr($modif, 1); - } elsif (index($modif, "y") == 0 || index($modif, "a") == 0) { - $year = $value; - $modif = substr($modif, 1); - } else { - $modif = substr($modif, 1); - } - } - } - - if ($defaultlanguage eq "F") { - print " année: $year\n"; - print " mois: $month\n"; - print " jour: $day\n"; - print " heure: $hour\n"; - print " minute: $minute\n"; - print " seconde: $second\n"; - } else { - print " year: $year\n"; - print " month: $month\n"; - print " day: $day\n"; - print " hour: $hour\n"; - print " minute: $minute\n"; - print " second: $second\n"; - } - - if ($year == 0 && $month == 0 && $day == 0 && $hour == 0 && $minute == 0 && $second == 0) { - if ($defaultlanguage eq "F") { - print "Vous devez entrer un ajustement avec cette commande, svp:\n"; - print " Valeur d'ajustement (-1, 1, +1, etc...)\n"; - print " Element modifié:\n"; - print " a ou y: année\n"; - print " m: mois\n"; - print " j ou d: jour\n"; - print " h: heure\n"; - print " mn: minute\n"; - print " s: seconde\n"; - print " <exemple> timeadd nomtest +1m-2mn1s-6y\n"; - print " Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"; - print " et 6 ans dans le même temps.\n"; - } else { - print "Please give an adjustment with this command:\n"; - print " Adjustment value (-1, 1, +1, etc...)\n"; - print " Modified element:\n"; - print " a or y: year\n"; - print " m: month\n"; - print " j or d: day\n"; - print " h: hour\n"; - print " mn: minute\n"; - print " s: second\n"; - print " <example> timeadd testname +1m-2mn1s-6y\n"; - print " this example adds 1 month and 1 second, and substracts 2 minutes\n"; - print " and 6 years at the same time.\n"; - } - return 137; - } - if ($year > 127 || $year < -127) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement d'années correct (de -127 à 127), svp.\n"; - } else { - print "Please give a correct adjustment for the years (from -127 to 127).\n"; - } - return 137; - } - if ($month > 255 || $month < -255) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement de mois correct (de -255 à 255), svp.\n"; - } else { - print "Please give a correct adjustment for the months (from -255 to 255).\n"; - } - return 137; - } - if ($day > 32767 || $day < -32767) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n"; - } else { - print "Please give a correct adjustment for the days (from -32767 to 32767).\n"; - } - return 137; - } - if ($hour > 32767 || $hour < -32767) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n"; - } else { - print "Please give a correct adjustment for the hours (from -32767 to 32767).\n"; - } - return 137; - } - if ($minute > 32767 || $minute < -32767) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n"; - } else { - print "Please give a correct adjustment for the minutes (from -32767 to 32767).\n"; - } - return 137; - } - if ($second > 32767 || $second < -32767) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n"; - } else { - print "Please give a correct adjustment for the seconds (from -32767 to 32767).\n"; - } - return 137; - } - - print $so pack("va24vvvvvv", 0x7950, $userid, $year, $month, $day, $hour, $minute, $second); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x7951) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 152; - } - $buf = readso(32); - my(@dat) = unpack("Va24V", $buf); - while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) { - chop($dat[1]); - }; - if ($dat[0] == -1 || $dat[0] == 4294967295) { - if ($defaultlanguage eq "F") { - print "Echec du changement de la validité du compte [$userid]. Le compte n'existe pas.\n"; - } else { - print "Account [$userid] validity limit changing failed. Account doesn't exist.\n"; - } - } elsif ($dat[2] == 0) { - if ($defaultlanguage eq "F") { - print "Limite de validité du compte [$dat[1]][id: $dat[0]] inchangée.\n"; - print "Le compte a une validité illimitée ou\n"; - print "la modification est impossible avec les ajustements demandés.\n"; - } else { - print "Validity limit of the account [$dat[1]][id: $dat[0]] unchanged.\n"; - print "The account have an unlimited validity limit or\n"; - print "the changing is impossible with the proposed adjustments.\n"; - } - } else { - if ($defaultlanguage eq "F") { - print "Limite de validité du compte [$dat[1]][id: $dat[0]] changée avec succès ". - ($dat[2] == 0 ? "en [illimité].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2]))); - } else { - print "Validity limit of the account [$dat[1]][id: $dat[0]] successfully changed ". - ($dat[2] == 0 ? "to [unlimited].\n" : "to be until ".(POSIX::ctime($dat[2]))); - } - # localtime($dat[2]) is also possible to display instead of POSIX::ctime. - } - - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Set the final date of a banishment of an account -sub bansetaccount() { - my($userid, $date, $time) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n"; - print " banset <nom_du_compte> 0 (0 = dé-bani)\n"; - print " ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n"; - print " unban/unbanish <nom du compte>\n"; - printf " Heure par défaut [hh:mm:ss]: 23:59:59\n"; - } else { - print "Please input an account name.\n"; - print "<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n"; - print " banset <account_name> 0 (0 = un-banished)\n"; - print " ban/banish yyyy/mm/dd hh:mm:ss <account name>\n"; - print " unban/unbanish <account name>\n"; - printf " Default time [hh:mm:ss]: 23:59:59\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - my($year, $month, $day) = split(/[.\-\/]/, $date); - my($hour, $minute, $second) = split(/:/, $time); - if ($time eq "") { - $hour = 23; - $minute = 59; - $second = 59; - } - my($timestamp); - if ($year eq "" || - ($year != 0 && ($month eq "" || $day eq "" || $hour eq "" || $minute eq "" || $second eq ""))) { - if ($defaultlanguage eq "F") { - print "Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n"; - } else { - print "Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"; - } - return 102; - } - if ($year == 0) { - $timestamp = 0; - } else { - if ($year < 70) { - $year = $year + 100; - } - if ($year >= 1900) { - $year = $year - 1900; - } - if ($month < 1 || $month > 12) { - if ($defaultlanguage eq "F") { - print "Entrez un mois correct svp (entre 1 et 12).\n"; - } else { - print "Please give a correct value for the month (from 1 to 12).\n"; - } - return 102; - } - $month = $month - 1; - if ($day < 1 || $day > 31) { - if ($defaultlanguage eq "F") { - print "Entrez un jour correct svp (entre 1 et 31).\n"; - } else { - print "Please give a correct value for the day (from 1 to 31).\n"; - } - return 102; - } - if ((($month == 3 || $month == 5 || $month == 8 || $month == 10) && $day > 30) || - ($month == 1 && $day > 29)) { - if ($defaultlanguage eq "F") { - print "Entrez un jour correct en fonction du mois svp.\n"; - } else { - print "Please give a correct value for a day of this month.\n"; - } - return 102; - } - if ($hour < 0 || $hour > 23) { - if ($defaultlanguage eq "F") { - print "Entrez une heure correcte svp (entre 0 et 23).\n"; - } else { - print "Please give a correct value for the hour (from 0 to 23).\n"; - } - return 102; - } - if ($minute < 0 || $minute > 59) { - if ($defaultlanguage eq "F") { - print "Entrez des minutes correctes svp (entre 0 et 59).\n"; - } else { - print "Please give a correct value for the minutes (from 0 to 59).\n"; - } - return 102; - } - if ($second < 0 || $second > 59) { - if ($defaultlanguage eq "F") { - print "Entrez des secondes correctes svp (entre 0 et 59).\n"; - } else { - print "Please give a correct value for the seconds (from 0 to 59).\n"; - } - return 102; - } - $timestamp = POSIX::mktime($second, $minute, $hour, $day, $month, $year, 0, 0, -1); # -1: no winter/summer time modification - if ($timestamp == undef) { - if ($defaultlanguage eq "F") { - print "Date incorrecte.\n"; - print "Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n"; - } else { - print "Invalid date.\n"; - print "Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"; - } - return 102; - } - } - - print $so pack("va24V", 0x794a, $userid, $timestamp); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x794b) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 152; - } - $buf = readso(32); - my(@dat) = unpack("Va24V", $buf); - while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) { - chop($dat[1]); - }; - if ($dat[0] != -1 && $dat[0] != 4294967295) { - if ($defaultlanguage eq "F") { - print "Date finale de banissement du compte [$dat[1]][id: $dat[0]] changée avec succès ". - ($dat[2] == 0 ? "en [dé-bannie].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2]))); - } else { - print "Final date of banishment of the account [$dat[1]][id: $dat[0]] successfully changed ". - ($dat[2] == 0 ? "to [unbanished].\n" : "to be until ".(POSIX::ctime($dat[2]))); - } - # localtime($dat[2]) is also possible to display instead of POSIX::ctime. - } else { - if ($defaultlanguage eq "F") { - print "Echec du changement de la date finale de banissement du compte [$userid]. Le compte n'existe pas.\n"; - } else { - print "Account [$userid] final date of banishment changing failed. Account doesn't exist.\n"; - } - } - - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Add/substract time to the final date of a banishment of an account -sub banaddaccount() { - my($userid, $modif) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print " <exemple> banadd nomtest +1m-2mn1s-6y\n"; - print " Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"; - print " et 6 ans dans le même temps.\n"; - } else { - print "Please input an account name.\n"; - print " <example> banadd testname +1m-2mn1s-6y\n"; - print " this example adds 1 month and 1 second, and substracts 2 minutes\n"; - print " and 6 years at the same time.\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - my($year, $month, $day) = (0, 0 ,0); - my($hour, $minute, $second) = (0, 0 ,0); - - $modif = lc($modif); - while (length($modif) > 0) { - my($value) = int($modif); - if ($value == 0) { - $modif = substr($modif, 1); - } else { - if (substr($modif, 0, 1) =~ /[\-\+]/) { - $modif = substr($modif, 1); - } - while (length($modif) > 0 && substr($modif, 0, 1) =~ /[0-9]/) { - $modif = substr($modif, 1); - } - if (index($modif, "s") == 0) { - $second = $value; - $modif = substr($modif, 1); - } elsif (index($modif, "mn") == 0) { - $minute = $value; - $modif = substr($modif, 2); - } elsif (index($modif, "h") == 0) { - $hour = $value; - $modif = substr($modif, 1); - } elsif (index($modif, "d") == 0 || index($modif, "j") == 0) { - $day = $value; - $modif = substr($modif, 1); - } elsif (index($modif, "m") == 0) { - $month = $value; - $modif = substr($modif, 1); - } elsif (index($modif, "y") == 0 || index($modif, "a") == 0) { - $year = $value; - $modif = substr($modif, 1); - } else { - $modif = substr($modif, 1); - } - } - } - - if ($defaultlanguage eq "F") { - print " année: $year\n"; - print " mois: $month\n"; - print " jour: $day\n"; - print " heure: $hour\n"; - print " minute: $minute\n"; - print " seconde: $second\n"; - } else { - print " year: $year\n"; - print " month: $month\n"; - print " day: $day\n"; - print " hour: $hour\n"; - print " minute: $minute\n"; - print " second: $second\n"; - } - - if ($year == 0 && $month == 0 && $day == 0 && $hour == 0 && $minute == 0 && $second == 0) { - if ($defaultlanguage eq "F") { - print "Vous devez entrer un ajustement avec cette commande, svp:\n"; - print " Valeur d'ajustement (-1, 1, +1, etc...)\n"; - print " Element modifié:\n"; - print " a ou y: année\n"; - print " m: mois\n"; - print " j ou d: jour\n"; - print " h: heure\n"; - print " mn: minute\n"; - print " s: seconde\n"; - print " <exemple> banadd nomtest +1m-2mn1s-6y\n"; - print " Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"; - print " et 6 ans dans le même temps.\n"; - } else { - print "Please give an adjustment with this command:\n"; - print " Adjustment value (-1, 1, +1, etc...)\n"; - print " Modified element:\n"; - print " a or y: year\n"; - print " m: month\n"; - print " j or d: day\n"; - print " h: hour\n"; - print " mn: minute\n"; - print " s: second\n"; - print " <example> banadd testname +1m-2mn1s-6y\n"; - print " this example adds 1 month and 1 second, and substracts 2 minutes\n"; - print " and 6 years at the same time.\n"; - } - return 137; - } - if ($year > 127 || $year < -127) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement d'années correct (de -127 à 127), svp.\n"; - } else { - print "Please give a correct adjustment for the years (from -127 to 127).\n"; - } - return 137; - } - if ($month > 255 || $month < -255) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement de mois correct (de -255 à 255), svp.\n"; - } else { - print "Please give a correct adjustment for the months (from -255 to 255).\n"; - } - return 137; - } - if ($day > 32767 || $day < -32767) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n"; - } else { - print "Please give a correct adjustment for the days (from -32767 to 32767).\n"; - } - return 137; - } - if ($hour > 32767 || $hour < -32767) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n"; - } else { - print "Please give a correct adjustment for the hours (from -32767 to 32767).\n"; - } - return 137; - } - if ($minute > 32767 || $minute < -32767) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n"; - } else { - print "Please give a correct adjustment for the minutes (from -32767 to 32767).\n"; - } - return 137; - } - if ($second > 32767 || $second < -32767) { - if ($defaultlanguage eq "F") { - print "Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n"; - } else { - print "Please give a correct adjustment for the seconds (from -32767 to 32767).\n"; - } - return 137; - } - - print $so pack("va24vvvvvv", 0x794c, $userid, $year, $month, $day, $hour, $minute, $second); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x794d) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 152; - } - $buf = readso(32); - my(@dat) = unpack("Va24V", $buf); - while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) { - chop($dat[1]); - }; - if ($dat[0] == -1 || $dat[0] == 4294967295) { - if ($defaultlanguage eq "F") { - print "Echec du changement de la date finale de banissement du compte [$userid]. Le compte n'existe pas.\n"; - } else { - print "Account [$userid] final date of banishment changing failed. Account doesn't exist.\n"; - } - } else { - if ($defaultlanguage eq "F") { - print "Date finale de banissement du compte [$dat[1]][id: $dat[0]] changée avec succès ". - ($dat[2] == 0 ? "en [dé-bannie].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2]))); - } else { - print "Final date of banishment of the account [$dat[1]][id: $dat[0]] successfully changed ". - ($dat[2] == 0 ? "to [unbanished].\n" : "to be until ".(POSIX::ctime($dat[2]))); - } - # localtime($dat[2]) is also possible to display instead of POSIX::ctime. - } - - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Request to displaying information about an account (by its name) -sub whoaccount() { - my($userid) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple> who nomtest\n"; - } else { - print "Please input an account name.\n"; - print "<example> who testname\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - - print $so pack("va24", 0x7952, $userid); - $so->flush(); - - $buf = readso(2); - if (unpack("v", $buf) != 0x7953) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 122; - } - my($id2, $GM_level, $name, $sex, $count, $status, $error_message, $last_login, $last_ip, $email, $validite, $ban_date, $memo_size) = unpack("VCa24cVVa20a24a16a40VVv", readso(148)); - my($memo) = ""; - if ($memo_size > 0) { - $memo = unpack("a".$memo_size, readso($memo_size)); - } - while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) { - chop($name); - }; - while (length($error_message) > 0 && substr($error_message, length($error_message)-1, 1) eq chr(0)) { - chop($error_message); - }; - while (length($last_login) > 0 && substr($last_login, length($last_login)-1, 1) eq chr(0)) { - chop($last_login); - }; - while (length($last_ip) > 0 && substr($last_ip, length($last_ip)-1, 1) eq chr(0)) { - chop($last_ip); - }; - while (length($email) > 0 && substr($email, length($email)-1, 1) eq chr(0)) { - chop($email); - }; - while (length($memo) > 0 && substr($memo, length($memo)-1, 1) eq chr(0)) { - chop($memo); - }; - - if ($id2 == -1 || $id2 == 4294967295) { - if ($defaultlanguage eq "F") { - print "Impossible de trouver le compte [$userid]. Le compte n'existe pas.\n"; - } else { - print "Unabled to find the account [$userid]. Account doesn't exist.\n"; - } - return 123; - } else { - if ($defaultlanguage eq "F") { - print "Le compte [$userid] a les caractéristiques suivantes:\n"; - } else { - print "The account [$userid] is set with:\n"; - } - if ($GM_level == 0) { - print " Id: $id2 (non-GM)\n"; - } else { - if ($defaultlanguage eq "F") { - print " Id: $id2 (GM niveau $GM_level)\n"; - } else { - print " Id: $id2 (GM level $GM_level)\n"; - } - } - if ($defaultlanguage eq "F") { - print " Nom: '$name'\n"; - print " Sexe: ".("Femme", "Male", "Serveur")[$sex]."\n"; - } else { - print " Name: '$name'\n"; - print " Sex: ".("Female", "Male", "Server")[$sex]."\n"; - } - print " E-mail: $email\n"; - if ($status == 7) { - print " Statut: 7 [You are Prohibited to log in until $error_message]\n"; - } else { - print " Statut: $status [".( - ($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"), - "Unregistered ID", - "Incorrect Password", - "This ID is expired", - "Rejected from Server", - "You have been blocked by the GM Team", - "Your Game's EXE file is not the latest version", - "You are Prohibited to log in until %s", - "Server is jammed due to over populated", - "No MSG", - "This ID is totally erased")[$status == 100 ? 10 : $status]."]\n"; - } - if ($defaultlanguage eq "F") { - print " Banissement: ".($ban_date == 0 ? "non banni.\n" : "jusqu'au ".(POSIX::ctime($ban_date))); - print " Compteur: $count connexion".("s", "")[$count > 1 ? 0 : 1]."\n"; - print " Dernière connexion le: $last_login (ip: $last_ip)\n"; - print " Limite de validité: ".($validite == 0 ? "illimité.\n" : "jusqu'au ".(POSIX::ctime($validite))); - } else { - print " Banishment: ".($ban_date == 0 ? "not banished.\n" : "until ".(POSIX::ctime($ban_date))); - print " Count: $count connection".("s", "")[$count > 1 ? 0 : 1]."\n"; - print " Last connection at: $last_login (ip: $last_ip)\n"; - print " Validity limit: ".($validite == 0 ? "unlimited.\n" : "until ".(POSIX::ctime($validite))); - } - print " Memo: '$memo'\n"; - } - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Request to displaying information about an account (by its id) -sub infoaccount() { - my($id) = @_; - if ($id < 0) { - if ($defaultlanguage eq "F") { - print "Entrez un id ayant une valeur positive svp.\n"; - } else { - print "Please input a positive value for the id.\n"; - } - return 136; - } - - print $so pack("vV", 0x7954, $id); - $so->flush(); - - $buf = readso(2); - if (unpack("v", $buf) != 0x7953) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 122; - } - my($id2, $GM_level, $name, $sex, $count, $status, $error_message, $last_login, $last_ip, $email, $validite, $ban_date, $memo_size) = unpack("VCa24cVVa20a24a16a40VVv", readso(148)); - my($memo) = ""; - if ($memo_size > 0) { - $memo = unpack("a".$memo_size, readso($memo_size)); - } - while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) { - chop($name); - }; - while (length($error_message) > 0 && substr($error_message, length($error_message)-1, 1) eq chr(0)) { - chop($error_message); - }; - while (length($last_login) > 0 && substr($last_login, length($last_login)-1, 1) eq chr(0)) { - chop($last_login); - }; - while (length($last_ip) > 0 && substr($last_ip, length($last_ip)-1, 1) eq chr(0)) { - chop($last_ip); - }; - while (length($email) > 0 && substr($email, length($email)-1, 1) eq chr(0)) { - chop($email); - }; - while (length($memo) > 0 && substr($memo, length($memo)-1, 1) eq chr(0)) { - chop($memo); - }; - - if (length($name) == 0 || $name eq "") { - if ($defaultlanguage eq "F") { - print "Impossible de trouver le nom du compte [id: $id2]. Le compte n'existe pas.\n"; - } else { - print "Unabled to find the account [id: $id2] name. Account doesn't exist.\n"; - } - return 123; - } else { - if ($defaultlanguage eq "F") { - print "Le compte [id: $id2] a les caractéristiques suivantes:\n"; - } else { - print "The account [id: $id2] is set with:\n"; - } - if ($GM_level == 0) { - print " Id: $id2 (non-GM)\n"; - } else { - if ($defaultlanguage eq "F") { - print " Id: $id2 (GM niveau $GM_level)\n"; - } else { - print " Id: $id2 (GM level $GM_level)\n"; - } - } - if ($defaultlanguage eq "F") { - print " Nom: '$name'\n"; - print " Sexe: ".("Femme", "Male", "Serveur")[$sex]."\n"; - } else { - print " Name: '$name'\n"; - print " Sex: ".("Female", "Male", "Server")[$sex]."\n"; - } - print " E-mail: $email\n"; - if ($status == 7) { - print " Statut: 7 [You are Prohibited to log in until $error_message]\n"; - } else { - print " Statut: $status [".( - ($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"), - "Unregistered ID", - "Incorrect Password", - "This ID is expired", - "Rejected from Server", - "You have been blocked by the GM Team", - "Your Game's EXE file is not the latest version", - "You are Prohibited to log in until %s", - "Server is jammed due to over populated", - "No MSG", - "This ID is totally erased")[$status == 100 ? 10 : $status]."]\n"; - } - if ($defaultlanguage eq "F") { - print " Banissement: ".($ban_date == 0 ? "non banni.\n" : "jusqu'au ".(POSIX::ctime($ban_date))); - print " Compteur: $count connexion".("s", "")[$count > 1 ? 0 : 1]."\n"; - print " Dernière connexion le: $last_login (ip: $last_ip)\n"; - print " Limite de validité: ".($validite == 0 ? "illimité.\n" : "jusqu'au ".(POSIX::ctime($validite))); - } else { - print " Banishment: ".($ban_date == 0 ? "not banished.\n" : "until ".(POSIX::ctime($ban_date))); - print " Count: $count connection".("s", "")[$count > 1 ? 0 : 1]."\n"; - print " Last connection at: $last_login (ip: $last_ip)\n"; - print " Validity limit: ".($validite == 0 ? "unlimited.\n" : "until ".(POSIX::ctime($validite))); - } - print " Memo: '$memo'\n"; - } - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Check the validity of a password -# (Note: never send back a password with login-server!! security of passwords) -sub checkaccount() { - my($userid, $passwd) = @_; - if ($userid eq "") { - if ($defaultlanguage eq "F") { - print "Entrez un nom de compte svp.\n"; - print "<exemple> check testname motdepasse\n"; - } else { - print "Please input an account name.\n"; - print "<example> check testname password\n"; - } - return 136; - } - if (verify_accountname($userid) == 0) { - return 102; - } - if ($passwd eq "") { - return 134 if (($passwd = typepasswd()) eq ""); - } - if (verify_password($passwd) == 0) { - return 131; - } - print $so pack("va24a24", 0x793a, $userid,$passwd); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x793b) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 132; - } - $buf = readso(28); - my($id2, $name) = unpack("Va24", $buf); - while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) { - chop($name); - }; - if ($id2 == -1 || $id2 == 4294967295) { - if ($defaultlanguage eq "F") { - print "Le compte [$userid] n'existe pas ou le mot de passe est incorrect.\n"; - } else { - print "The account [$userid] doesn't exist or the password is incorrect.\n"; - } - return 133; - } else { - if ($defaultlanguage eq "F") { - print "Le mot de passe donné correspond bien au compte [$name][id: $id2].\n"; - } else { - print "The proposed password is correct for the account [$name][id: $id2].\n"; - } - } - return 130; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Request to login-server to reload GM configuration file -sub reloadGM() { - print $so pack("v", 0x7955); - $so->flush(); - if ($defaultlanguage eq "F") { - print "Demande de recharger le fichier de configuration des GM envoyée.\n"; - print "Vérifiez les comptes GM actuels (après rechargement):\n"; - } else { - print "Request to reload the GM configuration file sended.\n"; - print "Check the actual GM accounts (after reloading):\n"; - } - &listaccount(0, 0, 1); # 1: to list only GM - return 180; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Send a broadcast message -sub sendbroadcast() { - my($type, $message) = @_; - if ($message eq "" || length($message) == 0) { - if ($defaultlanguage eq "F") { - print "Entrez un message svp.\n"; - if ($type == 0) { - print "<exemple> kami un message\n"; - } else { - print "<exemple> kamib un message\n"; - } - } else { - print "Please input a message.\n"; - if ($type == 0) { - print "<example> kami a message\n"; - } else { - print "<example> kamib a message\n"; - } - } - return 136; - } - - print $so pack("vvVa".length($message), 0x794e, $type, length($message), $message); - $so->flush(); - $buf = readso(2); - if (unpack("v", $buf) != 0x794f) { - if ($defaultlanguage eq "F") { - print "Problème de connexion au serveur (réponse incorrecte).\n"; - } else { - print "Connection error to the server (incorrect answer).\n"; - } - return 152; - } - $buf = readso(2); - my($answer) = unpack("v", $buf); - if ($answer == -1 || $answer == 65535) { - if ($defaultlanguage eq "F") { - print "Echec de l'envoi du message. Aucun server de char en ligne.\n"; - } else { - print "Message sending failed. No online char-server.\n"; - } - } else { - if ($defaultlanguage eq "F") { - print "Message transmis au server de logins avec succès.\n"; - } else { - print "Message successfully sended to login-server.\n"; - } - } -} - -#-------------------------------------------------------------------------- - -# Sub-function: Change language of displaying -sub changelanguage() { - my($language) = @_; - if ($language eq "" || length($language) == 0) { - if ($defaultlanguage == 'F') { - printf("Entrez une langue svp.\n"); - printf("<exemple> language english\n"); - printf(" language français\n"); - } else { - printf("Please input a language.\n"); - printf("<example> language english\n"); - printf(" language français\n"); - } - return 136; - } - - $language = uc(substr($language, 0, 1)); - if ($language =~ /^[EF]$/) { - $defaultlanguage = $language; - if ($defaultlanguage == 'F') { - printf("Changement de la langue d'affichage en Français.\n"); - } else { - printf("Displaying language changed to English.\n"); - } - } else { - if ($defaultlanguage == 'F') { - printf("Langue non paramétrée (langues possibles: 'Français' ou 'English').\n"); - } else { - printf("Undefined language (possible languages: Français or English).\n"); - } - } - - return 0; -} - -#-------------------------------------------------------------------------- - -# Sub-function: sending 'end of connection' packet -sub quit() { - print $so pack("v", 0x7532); - $so->flush(); -} - -#-------------------------------------------------------------------------- - -# Sub-function: Get datas from the socket -sub readso() { - my($len) = shift; - my($buf); - if (read($so, $buf, $len) < $len) { - if ($defaultlanguage eq "F") { - print "Erreur de lecture sur la Socket.\n"; - } else { - print "Socket read error.\n"; - } - exit(3); - } - return $buf; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Input of a password -sub typepasswd { - my($passwd1, $passwd2); - cbreak(); - if ($defaultlanguage eq "F") { - print "Entrez le mot de passe > "; $passwd1 = <STDIN>; chomp($passwd1); print "\n"; - print "Ré-entrez le mot de passe > "; $passwd2 = <STDIN>; chomp($passwd2); print "\n"; - } else { - print "Type the password > "; $passwd1 = <STDIN>; chomp($passwd1); print "\n"; - print "Verify the password > "; $passwd2 = <STDIN>; chomp($passwd2); print "\n"; - } - cooked(); - if ($passwd1 ne $passwd2) { - if ($defaultlanguage eq "F") { - print "Erreur de vérification du mot de passe: Saisissez le même mot de passe svp.\n"; - } else { - print "Password verification failed. Please input same password.\n"; - } - return ""; - } - return $passwd1; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Return ordonal text of a number -sub makeordinal { - my($c) = shift; - if ($defaultlanguage eq "F") { - if ($c < 1) { - return $c; - } - return $c.("er", "ème")[$c == 1 ? 0 : 1]; - } else { - if ($c % 10 < 4 && $c % 10 != 0 && ($c < 10 || $c > 20)) { - return $c.("st","nd","rd")[$c % 10 - 1]; - } - return $c."th"; - } -} - -#-------------------------------------------------------------------------- - -# Sub-function: Test of the validity of an account name (return 0 if incorrect, and 1 if ok) -sub verify_accountname { - my($account_name) = @_; # Get the account_name - if ($account_name =~ /[\x00-\x1f]/) { # remove control char - my($c) = length($`) + 1; - if ($defaultlanguage eq "F") { - print "Caractère interdit trouvé dans le nom du compte (".makeordinal($c)." caractère).\n"; - } else { - print "Illegal character found in the account name (".makeordinal($c)." character).\n"; - } - return 0; - } - if (length($account_name) < 4) { - if ($defaultlanguage eq "F") { - print "Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n"; - } else { - print "Account name is too short. Please input an account name of 4-23 bytes.\n"; - } - return 0; - } - if (length($account_name) > 23) { - if ($defaultlanguage eq "F") { - print "Nom du compte trop long. Entrez un nom de compte de 4-23 caractères.\n"; - } else { - print "Account name is too long. Please input an account name of 4-23 bytes.\n"; - } - return 0; - } - return 1; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Test of the validity of password (return 0 if incorrect, and 1 if ok) -sub verify_password { - my($password) = @_; # Get the password - if ($password =~ /[\x00-\x1f]/) { - my($c) = length($`) + 1; - if ($defaultlanguage eq "F") { - print "Caractère interdit trouvé dans le mot de passe (".makeordinal($c)." caractère).\n"; - } else { - print "Illegal character found in the password (".makeordinal($c)." character).\n"; - } - return 0; - } - if (length($password) < 4) { - if ($defaultlanguage eq "F") { - print "Mot de passe trop court. Entrez un mot de passe de 4-23 caractères.\n"; - } else { - print "Password is too short. Please input a password of 4-23 bytes.\n"; - } - return 0; - } - if (length($password) > 23) { - if ($defaultlanguage eq "F") { - print "Mot de passe trop long. Entrez un mot de passe de 4-23 caractères.\n"; - } else { - print "Password is too long. Please input a password of 4-23 bytes.\n"; - } - return 0; - } - return 1; -} - -#-------------------------------------------------------------------------- - -# Sub-function: Test of the validity of an e-mail (return 0 if incorrect, and 1 if ok) -sub verify_email { - my($email) = @_; # Get the e-mail - # To ignore a '.' before the @ (wanadoo, a provider, do that) - $email =~ s/\.\@/\@/; - # If the e-mail is void, it's not correct -> return 0 - if ($email eq '') { - return(0); - } - # If the e-mail have no "@", it's not correct -> return 0 - if ($email !~ /\@/) { - return(0); - } - # If the e-mail have a ",", a space, a tab or a ";", it's not correct -> return 0 - if ($email =~ /[\,|\s|\;]/) { - return(0) - }; - # IF - # (the e-mail contains 2 "@", or ".." or "@." or starts or finishes by a ".") - # OR IF - # (the e-mail doesn't contain "@localhost" AND - # - it doesn't contain characters followed by "@" itself followed by letters itself followed by "." and 2 or more letters - # - or an IP address) - # -> so, it's not good ! (finish !) - if ($email =~ /(@.*@)|(\.\.)|(@\.)|(\.@)|(^\.)|(\.$)/ || - ($email !~ /^.+\@localhost$/ && - $email !~ /^.+\@\[?(\w|[-.])+\.[a-zA-Z]{2,3}|[0-9]{1,3}\]?$/)) { - return(0); # non-valid email - } else { - # If not, the e-email address is correct - return(1); # valid email - } -}
\ No newline at end of file |