Clearing trunk.

git-svn-id: https://rathena.svn.sourceforge.net/svnroot/rathena/trunk@5091 54d463be-8e91-2dee-dedb-b68131a5f0ec

1 files changed, 0 insertions, 3793 deletions

diff --git a/src/tool/ladmin b/src/tool/ladmin
deleted file mode 100644
index d0c0be485..000000000
--- a/src/tool/ladmin
+++ /dev/null
@@ -1,3793 +0,0 @@
-#!/usr/bin/perl
-use POSIX;
-##########################################################################
-# EAthena login-server remote administration tool
-# New ladamin by [Yor]
-##########################################################################
-#-------------------------------INSTRUCTIONS------------------------------
-# Set the 4 variables below:
-#   IP of the login server.
-#   Port where the login-server listens incoming packets.
-#   Password of administration (same of config_athena.conf).
-#   Displayed language of the sofware (if not correct, english is used).
-# IMPORTANT:
-#   Be sure that you authorize remote administration in login-server
-#   (see login_athena.conf, 'admin_state' parameter)
-#-------------------------------------------------------------------------
-my($loginserverip) = "127.0.0.1";        # IP of login-server
-my($loginserverport) = 6900;             # Port of login-server
-my($loginserveradminpassword) = "admin"; # Administration password
-my($connecttimeout) = 10;                # Timeout of connection (in seconds)
-my($passenc) = 2;                        # Encoding type of the password
-my($defaultlanguage) = "E";              # Default language (F: Français/E: English)
-                                         # (if it's not 'F', default is English)
-
-#-------------------------------------------------------------------------
-#  LIST of COMMANDs that you can type at the prompt:
-#    To use these commands you can only type only the first letters.
-#    You must type a minimum of letters (you can not type 'a',
-#      because ladmin doesn't know if it's for 'aide' or for 'add')
-#    <Example> q <= quit, li <= list, pass <= passwd, etc.
-#
-#  Note: every time you must give a account_name, you can use "" or '' (spaces can be included)
-#
-#  aide/help/?
-#    Display the description of the commands
-#  aide/help/? [command]
-#    Display the description of the specified command
-#
-#  add <account_name> <sex> <password>
-#    Create an account with the default email (a@a.com).
-#    Concerning the sex, only the first letter is used (F or M).
-#    The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.
-#    When the password is omitted, the input is done without displaying of the pressed keys.
-#    <example> add testname Male testpass
-#
-#  ban/banish yyyy/mm/dd hh:mm:ss <account name>
-#    Changes the final date of a banishment of an account.
-#    Same command of banset, except that account_name is at end
-#
-#  banadd <account_name> <modifier>
-#    Adds or substracts time from the final date of a banishment of an account.
-#    Modifier is done as follows:
-#      Adjustment value (-1, 1, +1, etc...)
-#      Modified element:
-#        a or y: year
-#        m:  month
-#        j or d: day
-#        h:  hour
-#        mn: minute
-#        s:  second
-#    <example> banadd testname +1m-2mn1s-6y
-#              this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
-#  NOTE: If you modify the final date of a non-banished account,
-#        you fix the final date to (actual time +- adjustments)
-#
-#  banset <account_name> yyyy/mm/dd [hh:mm:ss]
-#    Changes the final date of a banishment of an account.
-#    Default time: 23:59:59
-#  banset <account_name> 0
-#    Set a non-banished account (0 = unbanished).
-#
-#  block <account name>
-#    Set state 5 (You have been blocked by the GM Team) to an account.
-#    Same command of state <account_name> 5.
-#
-#  check <account_name> <password>
-#    Check the validity of a password for an account
-#    NOTE: Server will never sends back a password.
-#          It's the only method you have to know if a password is correct.
-#          The other method is to have a ('physical') access to the accounts file.
-#
-#  create <account_name> <sex> <email> <password>
-#    Like the 'add' command, but with e-mail moreover.
-#    <example> create testname Male my@mail.com testpass
-#
-#  del <account name>
-#    Remove an account.
-#    This order requires confirmation. After confirmation, the account is deleted.
-#
-#  email <account_name> <email>
-#    Modify the e-mail of an account.
-#
-#  getcount
-#    Give the number of players online on all char-servers.
-#
-#  gm <account_name> [GM_level]
-#    Modify the GM level of an account.
-#    Default value remove GM level (GM level = 0).
-#    <example> gm testname 80
-#
-#  id <account name>
-#    Give the id of an account.
-#
-#  info <account_id>
-#    Display complete information of an account.
-#
-#  kami <message>
-#    Sends a broadcast message on all map-server (in yellow).
-#  kamib <message>
-#    Sends a broadcast message on all map-server (in blue).
-#
-#  language <language>
-#    Change the language of displaying.
-#
-#  list/ls [start_id [end_id]]
-#    Display a list of accounts.
-#    'start_id', 'end_id': indicate end and start identifiers.
-#    Research by name is not possible with this command.
-#    <example> list 10 9999999
-#
-#  listBan/lsBan [start_id [end_id]]
-#    Like list/ls, but only for accounts with state or banished
-#
-#  listGM/lsGM [start_id [end_id]]
-#    Like list/ls, but only for GM accounts
-#
-#  listOK/lsOK [start_id [end_id]]
-#    Like list/ls, but only for accounts without state and not banished
-#
-#  memo <account_name> <memo>
-#    Modify the memo of an account.
-#    'memo': it can have until 253 characters (with spaces or not).
-#
-#  name <account_id>
-#    Give the name of an account.
-#
-#  passwd <account_name> <new_password>
-#    Change the password of an account.
-#    When new password is omitted, the input is done without displaying of the pressed keys.
-#
-#  quit/end/exit
-#    End of the program of administration
-#
-#  reloadGM
-#    Reload GM configuration file
-#
-#  search <expression>
-#    Seek accounts.
-#    Displays the accounts whose names correspond.
-#  search -r/-e/--expr/--regex <expression>
-#    Seek accounts by regular expression.
-#    Displays the accounts whose names correspond.
-#
-#  sex <account_name> <sex>
-#    Modify the sex of an account.
-#    <example> sex testname Male
-#
-#  state <account_name> <new_state> <error_message_#7>
-#    Change the state of an account.
-#    'new_state': state is the state of the packet 0x006a + 1. The possibilities are:
-#                 0 = Account ok            6 = Your Game's EXE file is not the latest version
-#                 1 = Unregistered ID       7 = You are Prohibited to log in until %s
-#                 2 = Incorrect Password    8 = Server is jammed due to over populated
-#                 3 = This ID is expired    9 = No MSG
-#                 4 = Rejected from Server  100 = This ID has been totally erased
-#                 5 = You have been blocked by the GM Team
-#                 all other values are 'No MSG', then use state 9 please.
-#    'error_message_#7': message of the code error 6 = Your are Prohibited to log in until %s (packet 0x006a)
-#
-#  timeadd <account_name> <modifier>
-#    Adds or substracts time from the validity limit of an account.
-#    Modifier is done as follows:
-#      Adjustment value (-1, 1, +1, etc...)
-#      Modified element:
-#        a or y: year
-#        m:  month
-#        j or d: day
-#        h:  hour
-#        mn: minute
-#        s:  second
-#    <example> timeadd testname +1m-2mn1s-6y
-#              this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
-#  NOTE: You can not modify a unlimited validity limit.
-#        If you want modify it, you want probably create a limited validity limit.
-#        So, at first, you must set the validity limit to a date/time.
-#
-#  timeset <account_name> yyyy/mm/dd [hh:mm:ss]
-#    Changes the validity limit of an account.
-#    Default time: 23:59:59
-#  timeset <account_name> 0
-#    Gives an unlimited validity limit (0 = unlimited).
-#
-#  unban/unbanish <account name>
-#    Unban an account.
-#    Same command of banset 0.
-#
-#  unblock <account name>
-#    Set state 0 (Account ok) to an account.
-#    Same command of state <account_name> 0.
-#
-#  version
-#    Display the version of the login-server.
-#
-#  who <account name>
-#    Displays complete information of an account.
-#
-#-------------------------------------------------------------------------
-# Possibilities to execute ladmin in command line by usage of the software with a parameter:
-# ./ladmin --mode param1 ...
-#
-#  --makesymlink                                    -- Create the symbolic links for a use in shell
-#  --add <account_name> <sex> <password>            -- Create an account with the default email (or -a)
-#  --ban yyyy/mm/dd hh:mm:ss <account_name>         -- Change the final date of a banishment of an account (or -b)
-#  --banadd <account_name> <modifier>               -- Add or substract time from the final date of a banishment of an account (or - ba)
-#  --banset <account_name> yyyy/mm/dd [hh:mm:ss]    -- Change the final date of a banishment of an account (or -bs)
-#  --banset <account_name> 0                        -- Unbanish an account (or -bs)
-#  --block <account_name>                           -- Set state 5 to an account (or -bl)
-#  --check <account_name> <password>                -- Check the validity of a password for an account (or -check)
-#  --create <account_name> <sex> <email> <password> -- Create an account with email (or -c)
-#  --del <account_name>                             -- Remove an account (or -d)
-#  --email <account_name> <email>                   -- Modify an email of an account (or -e)
-#  --getcount                                       -- Give the number of players online on all char-servers (or -g)
-#  --gm <account_name> <GM_level>                   -- Change the GM level of an account (or -gm)
-#  --id <account_name>                              -- Give the id of an account (or -i)
-#  --info <account_id>                              -- Display complete information of an account (or -info)
-#  --kami <message>                                 -- Sends a broadcast message on all map-server (in yellow).
-#  --kamib <message>                                -- Sends a broadcast message on all map-server (in blue).
-#  --language <language>                            -- Change the language of displaying (-lang).
-#  --list [First_id [Last_id]]                      -- Display a list of accounts (or -l)
-#  --listBan [start_id [end_id]]                    -- Display a list of accounts with state or banished (or -lBan)
-#  --listGM [First_id [Last_id]]                    -- Display a list of GM accounts (or -lGM)
-#  --listOK [start_id [end_id]]                     -- Display a list of accounts without state and not banished (or -lOK)
-#  --memo <account_name> <memo>                     -- Modify the memo of an account (or -e)
-#  --name <account_id>                              -- Give the name of an account (or -n)
-#  --passwd <account_name> <new_password>           -- Change the password of an account (or -p)
-#  --reloadGM                                       -- Reload GM configuration file (or -r)
-#  --search <expression>                            -- Seek accounts (or -s)
-#  --search -e/-r/--expr/--regex <expression>       -- Seek accounts by REGEX (or -s)
-#  --sex <account_name> <sex>                       -- Change the sex of an account (or -sex)
-#  --state <account_name> <new_state> <error_message_#7> -- Change the state of an account (or -t)
-#  --timeadd <account_name> <modifier>              -- Add or substract time from the validity limit of an account (or - ta)
-#  --timeset <account_name> yyyy/mm/dd [hh:mm:ss]   -- Change the validify limit of an account (or -ts)
-#  --timeset <account_name> 0                       -- Give a unlimited validity limit (or -ts)
-#  --unban/unbanish <account_name>                  -- Unban an account (or -uba)
-#  --unblock <account_name>                         -- Set state 0 to an account (or -ubl)
-#  --version                                        -- Display the version of the login-server (or -v)
-#  --who <account_name>                             -- Display complete information of an account (or -w)
-#
-#  <example> ./ladmin --addaccount testname Male testpass
-#
-#-------------------------------------------------------------------------
-# Possibilities to execute ladmin with symbolic links in Shell
-# To create the symbolic links, execute ladmin with the '-- makesymlink' option.
-#
-#  addaccount <account_name> <sex> <password>            -- Create an account with the default email
-#  banaccount yyyy/mm/dd hh:mm:ss <account_name>         -- Change the final date of a banishment of an account
-#  banaddaccount <account_name> <modifier>               -- Add or substract time from the final date of a banishment of an account
-#  bansetaccount <account_name> yyyy/mm/dd [hh:mm:ss]    -- Change the final date of a banishment of an account
-#  bansetaccount <account_name> 0                        -- Unbanish an account
-#  blockaccount <account_name>                           -- Set state 5 (blocked by the GM Team) to an account
-#  checkaccount <account_name> <password>                -- Check the validity of a password for an account
-#  createaccount <account_name> <sex> <email> <password> -- Create an account with email
-#  delaccount <account_name>                             -- Remove an account
-#  emailaccount <account_name> <email>                   -- Modify an email of an account
-#  getcount                                              -- Give the number of players online on all char-servers
-#  gmaccount <account_name> <GM_level>                   -- Change the GM level of an account
-#  idaccount <account_name>                              -- Give the id of an account
-#  infoaccount <account_id>                              -- Display complete information of an account
-#  kami <message>                                        -- Sends a broadcast message on all map-server (in yellow).
-#  kamib <message>                                       -- Sends a broadcast message on all map-server (in blue).
-#  ladminlanguage <language>                             -- Change the language of displaying.
-#  listaccount [First_id [Last_id]]                      -- Display a list of accounts
-#  listBanaccount [start_id [end_id]]                    -- Display a list of accounts with state or banished
-#  listGMaccount [First_id [Last_id]]                    -- Display a list of GM accounts
-#  listOKaccount [start_id [end_id]]                     -- Display a list of accounts without state and not banished
-#  loginserverversion                                    -- Display the version of the login-server
-#  memoaccount <account_name> <memo>                     -- Modify the memo of an account
-#  nameaccount <account_id>                              -- Give the name of an account
-#  passwdaccount <account_name> <new_password>           -- Change the password of an account
-#  reloadGM                                              -- Reload GM configuration file
-#  searchaccount <expression>                            -- Seek accounts
-#  searchaccount -e/-r/--expr/--regex <expression>       -- Seek accounts by REGEX
-#  sexaccount <account_name> <sex>                       -- Change the sex of an account (or -sex)
-#  stateaccount <account_name> <new_state> <error_message_#7> -- Change the state of an account
-#  timeaddaccount <account_name> <modifier>              -- Add or substract time from the validity limit of an account
-#  timesetaccount <account_name> yyyy/mm/dd [hh:mm:ss]   -- Change the validify limit of an account
-#  timesetaccount <account_name> 0                       -- Give a unlimited validity limit
-#  unbanaccount <account_name>                           -- Unban an account
-#  unblockaccount <account_name>                         -- Set state 0 (Account ok) to an account
-#  whoaccount <account_name>                             -- Display complete information of an account
-#  <exemple> ./addaccount testname Male testpass
-#
-#-------------------------------------------------------------------------
-# About the encoding:
-#
-#   The Digest::MD5 module is necessary to use the encrypted password system.
-#   When the software cannot found the Digest::MD5 module,
-#     encoding is automatically disabled ($passenc=0), which allows
-#     to use this program in any cases.
-#
-#-------------------------------------------------------------------------
-# How to use ladmin with UNIX:
-#
-# You excecute ladmin as a standard command.
-#  <Example of preparation to have an access to ladmin>
-#    $ mv ladmin ladmin_org
-#    $ nkf -eLu ladmin_org > ladmin
-#    $ chmod 700 ladmin
-#  <Example to start directly ladmin>
-#    $ perl ladmin
-#
-##########################################################################
-
-
-use strict;
-use IO::Socket;
-use Term::ReadLine;
-eval { use POSIX qw(:termios_h); };
-eval { use Digest::MD5 qw(md5); } if $passenc;
-$passenc = 0 if($@);
-
-my($ver) = "1.00";
-
-# Start of termios
-my($termios, $orgterml, $termlecho, $termlnoecho) = ();
-eval{
-	$termios = POSIX::Termios->new();
-	$termios->getattr(fileno(STDIN));
-	$orgterml = $termios->getlflag();
-	$termlecho = ECHO | ECHOK | ICANON;
-	$termlnoecho = $orgterml & ~$termlecho;
-};
-
-# Modification of termios for the displaying of passwords (no displays for pressed keys)
-sub cbreak() {
-	if ($termios) {
-		$termios->setlflag($termlnoecho);
-		$termios->setcc(VTIME, 1);
-		$termios->setattr(fileno(STDIN), TCSANOW);
-	}
-}
-# Modification of termios to return at the normal displaying (after input of the passwords)
-sub cooked() {
-	if ($termios) {
-		$termios->setlflag($orgterml);
-		$termios->setcc(VTIME,0);
-		$termios->setattr(fileno(STDIN),TCSANOW);
-	}
-}
-END{ cooked() }
-
-if ($defaultlanguage eq "F") {
-	print "Outil d'administration à distance de eAthena V.$ver\n";
-} else {
-	print "EAthena login-server administration tool V.$ver\n";
-}
-
-# Creation of the symbolic links for call of the program in line command of the shell
-if ($ARGV[0] eq "--makesymlink") {
-	symlink $0, "loginserverversion";
-	symlink $0, "addaccount";
-	symlink $0, "banaccount";
-	symlink $0, "banaddaccount";
-	symlink $0, "bansetaccount";
-	symlink $0, "blockaccount";
-	symlink $0, "checkaccount";
-	symlink $0, "createaccount";
-	symlink $0, "delaccount";
-	symlink $0, "emailaccount";
-	symlink $0, "getcount";
-	symlink $0, "gmaccount";
-	symlink $0, "idaccount";
-	symlink $0, "infoaccount";
-	symlink $0, "kami";
-	symlink $0, "kamib";
-	symlink $0, "ladminlanguage";
-	symlink $0, "listaccount";
-	symlink $0, "listBanaccount";
-	symlink $0, "listGMaccount";
-	symlink $0, "listOKaccount";
-	symlink $0, "memoaccount";
-	symlink $0, "nameaccount";
-	symlink $0, "passwdaccount";
-	symlink $0, "reloadGM";
-	symlink $0, "searchaccount";
-	symlink $0, "sexaccount";
-	symlink $0, "stateaccount";
-	symlink $0, "timeaddaccount";
-	symlink $0, "timesetaccount";
-	symlink $0, "unbanaccount";
-	symlink $0, "unblockaccount";
-	symlink $0, "whoaccount";
-	if ($defaultlanguage eq "F") {
-		print "Liens symbliques créés.\n";
-	} else {
-		print "Symbolic links created.\n";
-	}
-	exit(0);
-}
-
-# Connection to the login-server
-my($so,$er) = ();
-eval{
-	$so = IO::Socket::INET->new(
-		PeerAddr=> $loginserverip,
-		PeerPort=> $loginserverport,
-#		Proto   => "tcp",
-		Timeout => $connecttimeout) or $er = 1;
-};
-if ($er || $@) {
-	if ($defaultlanguage eq "F") {
-		print "\nImpossible de se connecter au serveur de login [${loginserverip}:$loginserverport] !\n";
-	} else {
-		print "\nImpossible to have a connection with the login-server [${loginserverip}:$loginserverport] !\n";
-	}
-	print "$!\n";	# Displaying of the error
-	exit(2);
-}
-
-# Sending the administration password
-if ($passenc == 0) {
-	print $so pack("v2a24",0x7918,0,$loginserveradminpassword);
-	$so->flush();
-} else {
-	print $so pack("v",0x791a);
-	$so->flush();
-	my($buf) = readso(4);
-	if (unpack("v",$buf) != 0x01dc) {
-		if ($defaultlanguage eq "F") {
-			print "Erreur au login (échec de la création de la clef md5).\n";
-		} else {
-			print "Error at login (failure of the md5 key creation).\n";
-		}
-	}
-	$buf = readso(unpack("x2v",$buf)-4);
-	my($md5bin) = md5(($passenc == 1) ? $buf.$loginserveradminpassword : $loginserveradminpassword.$buf);
-	print $so pack("v2a16",0x7918,$passenc,$md5bin);
-	$so->flush();
-}
-
-# Waiting of the server reply
-my($buf) = readso(3);
-
-if (unpack("v",$buf) != 0x7919 || unpack("x2c",$buf) != 0) {
-	if ($defaultlanguage eq "F") {
-		print "Erreur de login:\n";
-		print " - mot de passe incorrect,\n";
-		print " - système d'administration non activé, ou\n";
-		print " - IP non autorisée.\n";
-	} else {
-		print "Error at login:\n";
-		print " - incorrect password,\n";
-		print " - administration system not activated, or\n";
-		print " - unauthorised IP.\n";
-	}
-	quit();
-	exit(4);
-}
-
-if ($defaultlanguage eq "F") {
-	print "Connexion établie.\n";
-} else {
-	print "Established connection.\n";
-}
-
-#-------------------------------------------------------------------------
-# Here are checked the command lines with arguments and symbolic links (no prompt)
-
-if ($0 =~ /addaccount$/ ||
-    (($ARGV[0] eq "-a" || $ARGV[0] eq "--add") && ((shift @ARGV), 1))) {
-	my($r) = addaccount($ARGV[0], $ARGV[1], $ARGV[2]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /banaccount$/ || $0 =~ /banishaccount$/ ||
-         (($ARGV[0] eq "-b" || $ARGV[0] eq "--ban" || $ARGV[0] eq "--banish") && ((shift @ARGV), 1))) {
-	my($r) = bansetaccount($ARGV[1], $ARGV[2], $ARGV[0]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /banaddaccount$/ ||
-         (($ARGV[0] eq "-ba" || $ARGV[0] eq "--banadd") && ((shift @ARGV), 1))) {
-	my($r) = banaddaccount($ARGV[0], $ARGV[1]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /bansetaccount$/ ||
-         (($ARGV[0] eq "-bs" || $ARGV[0] eq "--banset") && ((shift @ARGV), 1))) {
-	my($r) = bansetaccount($ARGV[0], $ARGV[1], $ARGV[2]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /blockaccount$/ ||
-         (($ARGV[0] eq "-bl" || $ARGV[0] eq "--block") && ((shift @ARGV), 1))) {
-	my($r) = changestate($ARGV[0], 5, "");
-	quit();
-	exit($r);
-} elsif ($0 =~ /checkaccount$/ ||
-         (($ARGV[0] eq "-check" || $ARGV[0] eq "--check") && ((shift @ARGV), 1))) {
-	my($r) = checkaccount($ARGV[0], $ARGV[1]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /createaccount$/ ||
-         (($ARGV[0] eq "-c" || $ARGV[0] eq "--create") && ((shift @ARGV), 1))) {
-	my($r) = createaccount($ARGV[0], $ARGV[1], $ARGV[2], $ARGV[3]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /delaccount$/ ||
-         (($ARGV[0] eq "-d" || $ARGV[0] eq "--del") && ((shift @ARGV), 1))) {
-	my($r) = delaccount($ARGV[0]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /emailaccount$/ ||
-         (($ARGV[0] eq "-e" || $ARGV[0] eq "--email") && ((shift @ARGV), 1))) {
-	my($r) = changeemail($ARGV[0], $ARGV[1]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /getcount$/ ||
-         (($ARGV[0] eq "-g" || $ARGV[0] eq "--getcount") && ((shift @ARGV), 1))) {
-	my($r) = getlogincount();
-	quit();
-	exit($r);
-} elsif ($0 =~ /gmaccount$/ ||
-         (($ARGV[0] eq "-gm" || $ARGV[0] eq "--gm") && ((shift @ARGV), 1))) {
-	my($r) = changegmlevel($ARGV[0], $ARGV[1]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /id$/ ||
-         (($ARGV[0] eq "-i" || $ARGV[0] eq "--id") && ((shift @ARGV), 1))) {
-	my($r) = idaccount($ARGV[0]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /infoaccount$/ ||
-         (($ARGV[0] eq "-info" || $ARGV[0] eq "--info") && ((shift @ARGV), 1))) {
-	my($r) = infoaccount($ARGV[0]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /kami$/ ||
-         (($ARGV[0] eq "-kami" || $ARGV[0] eq "--kami") && ((shift @ARGV), 1))) {
-	my($r) = sendbroadcast(0, $ARGV[0]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /kamib$/ ||
-         (($ARGV[0] eq "-kamib" || $ARGV[0] eq "--kamib") && ((shift @ARGV), 1))) {
-	my($r) = sendbroadcast(0x10, $ARGV[0]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /ladminlanguage$/ ||
-         (($ARGV[0] eq "-lang" || $ARGV[0] eq "--language") && ((shift @ARGV), 1))) {
-	my($r) = changelanguage($ARGV[0]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /listaccount$/ ||
-         (($ARGV[0] eq "-l" || $ARGV[0] eq "--list") && ((shift @ARGV), 1))) {
-	my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 0); # 0: to list all
-	quit();
-	exit($r);
-} elsif ($0 =~ /listBanaccount$/ ||
-         (($ARGV[0] eq "-lBan" || $ARGV[0] eq "--listBan") && ((shift @ARGV), 1))) {
-	my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 3); # 3: to list only accounts with state or banished
-	quit();
-	exit($r);
-} elsif ($0 =~ /listGMaccount$/ ||
-         (($ARGV[0] eq "-lGM" || $ARGV[0] eq "--listGM") && ((shift @ARGV), 1))) {
-	my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 1); # 1: to list only GM
-	quit();
-	exit($r);
-} elsif ($0 =~ /listOKaccount$/ ||
-         (($ARGV[0] eq "-lOK" || $ARGV[0] eq "--listOK") && ((shift @ARGV), 1))) {
-	my($r) = listaccount(int($ARGV[0]), int($ARGV[1]), 4); # 4: to list only accounts without state and not banished
-	quit();
-	exit($r);
-} elsif ($0 =~ /loginserverversion$/ ||
-         (($ARGV[0] eq "-v" || $ARGV[0] eq "--version") && ((shift @ARGV), 1))) {
-	my($r) = checkloginversion();
-	quit();
-	exit($r);
-} elsif ($0 =~ /memoaccount$/ ||
-         (($ARGV[0] eq "-m" || $ARGV[0] eq "--memo") && ((shift @ARGV), 1))) {
-	my($r) = changememo($ARGV[0], $ARGV[1]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /nameaccount$/ ||
-         (($ARGV[0] eq "-n" || $ARGV[0] eq "--name") && ((shift @ARGV), 1))) {
-	my($r) = nameaccount(int($ARGV[0]));
-	quit();
-	exit($r);
-} elsif ($0 =~ /passwdaccount$/ ||
-         (($ARGV[0] eq "-p" || $ARGV[0] eq "--passwd") && ((shift @ARGV), 1))) {
-	my($r) = changepasswd($ARGV[0], $ARGV[1]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /reloadGM$/ ||
-         (($ARGV[0] eq "-r" || $ARGV[0] eq "--reloadGM") && ((shift @ARGV), 1))) {
-	my($r) = reloadGM();
-	quit();
-	exit($r);
-} elsif ($0 =~ /searchaccount$/ ||
-         (($ARGV[0] eq "-s" || $ARGV[0] eq "--search") && ((shift @ARGV), 1))) {
-	my($r) = searchaccount($ARGV[0], $ARGV[1]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /sexaccount$/ ||
-         (($ARGV[0] eq "-sex" || $ARGV[0] eq "--sex") && ((shift @ARGV), 1))) {
-	my($r) = changesex($ARGV[0], $ARGV[1]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /stateaccount$/ ||
-         (($ARGV[0] eq "-t" || $ARGV[0] eq "--state") && ((shift @ARGV), 1))) {
-	my($r) = changestate($ARGV[0], $ARGV[1], $ARGV[2]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /timeaddaccount$/ ||
-         (($ARGV[0] eq "-ta" || $ARGV[0] eq "--timeadd") && ((shift @ARGV), 1))) {
-	my($r) = timeaddaccount($ARGV[0], $ARGV[1]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /timesetaccount$/ ||
-         (($ARGV[0] eq "-ts" || $ARGV[0] eq "--timeset") && ((shift @ARGV), 1))) {
-	my($r) = timesetaccount($ARGV[0], $ARGV[1], $ARGV[2]);
-	quit();
-	exit($r);
-} elsif ($0 =~ /unbanaccount$/ || $0 =~ /unbanishaccount$/ ||
-         (($ARGV[0] eq "-uba" || $ARGV[0] eq "--unban" || $ARGV[0] eq "--unbanish") && ((shift @ARGV), 1))) {
-	my($r) = bansetaccount($ARGV[0], 0, "");
-	quit();
-	exit($r);
-} elsif ($0 =~ /unblockaccount$/ ||
-         (($ARGV[0] eq "-ubl" || $ARGV[0] eq "--unblock") && ((shift @ARGV), 1))) {
-	my($r) = changestate($ARGV[0], 0, "");
-	quit();
-	exit($r);
-} elsif ($0 =~ /whoaccount$/ ||
-         (($ARGV[0] eq "-w" || $ARGV[0] eq "--who") && ((shift @ARGV), 1))) {
-	my($r) = whoaccount($ARGV[0]);
-	quit();
-	exit($r);
-}
-
-#-------------------------------------------------------------------------
-if ($defaultlanguage eq "F") {
-	print "Lecture de la version du serveur de login...\n";
-} else {
-	print "Reading of the version of the login-server...\n";
-}
-checkloginversion();
-
-# Set the prompt line
-my($term) = new Term::ReadLine "ladmin";
-
-# Here begin the infinite loop to read prompts
-while(1) {
-	# Displaying of the prompt
-	print "\n";
-	if ($defaultlanguage eq "F") {
-		printf "\033[32mPour afficher les commandes, tapez 'Entrée'.\033[0m\n";
-	} else {
-		printf "\033[32mTo list the commands, type 'enter'.\033[0m\n";
-	}
-	my($cmd) = $term->readline("ladmin> ");
-	# split and recovery of the input
-	chomp $cmd; # remove cariage return
-	$cmd =~ s/\x1b\[\d*\w//g; # remove (esc)[(number)(1alpha) = screen control sequence
-	$cmd =~ s/[\x00-\x1f]//g; # remove control char
-	my($command, $parameters) = split /\s+/,$cmd,2; # extract command and parameters
-	$command = lc($command); # command in lowercase
-	my(@paramlist) = split /\s+/,$parameters; # get list of parameters
-
-	if ($command eq "?" || $command eq "") {
-		$command = "aide" if ($defaultlanguage eq "F");
-		$command = "help" if ($defaultlanguage ne "F");
-	}
-
-	# Analyse of the command
-	eval {
-# help
-		if ("aide" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
-			displayhelp("aide", $paramlist[0]);
-		} elsif ("help" =~ /^\Q$command/) {
-			displayhelp("help", $paramlist[0]);
-
-# general commands
-		} elsif ("add" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(.*)/)) {
-				addaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> <sex> <password>
-			} elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
-				addaccount($paramlist[0], $paramlist[1], ""); # <account_name> <sex> <password>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(.*)/)) {
-				addaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> <sex> <password>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
-				addaccount($paramlist[0], $paramlist[1], ""); # <account_name> <sex> <password>
-			} else {
-				@paramlist = split /\s+/,$parameters;
-				addaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> <sex> <password>
-			}
-
-		} elsif ($command eq "ban" || ("banish" =~ /^\Q$command/ && length($command) >= 4)) {
-			if (@paramlist = ($parameters =~ m/^(\S+)\s+(\S+)\s+"(.*)"/)) { # yyyy/mm/dd hh:mm:ss <account_name>
-				bansetaccount($paramlist[2], $paramlist[0], $paramlist[1]); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} elsif (@paramlist = ($parameters =~ m/^(\S+)\s+(\S+)\s+'(.*)'/)) { # yyyy/mm/dd hh:mm:ss <account_name>
-				bansetaccount($paramlist[2], $paramlist[0], $paramlist[1]); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} else {
-				@paramlist = split /\s+/,$parameters,3; # yyyy/mm/dd hh:mm:ss <account_name>
-				bansetaccount($paramlist[2], $paramlist[0], $paramlist[1]); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			}
-
-		} elsif (("banadd" =~ /^\Q$command/ || $command eq "ba") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
-				banaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
-				banaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
-			} else {
-				@paramlist = split /\s+/,$parameters;
-				banaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
-			}
-
-		} elsif (("banset" =~ /^\Q$command/ || $command eq "bs") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)/)) {
-				bansetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
-				bansetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)/)) {
-				bansetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
-				bansetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} else {
-				@paramlist = split /\s+/,$parameters;
-				bansetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			}
-
-		} elsif ("block" =~ /^\Q$command/ && length($command) >= 2) {
-			if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
-				changestate($paramlist[0], 5, ""); # <account_name> <new_state> <error_message_#7>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
-				changestate($paramlist[0], 5, ""); # <account_name> <new_state> <error_message_#7>
-			} else {
-				@paramlist = split /\s+/,$parameters,1;
-				changestate($paramlist[0], 5, ""); # <account_name> <new_state> <error_message_#7>
-			}
-
-		} elsif ("check" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(.*)/)) {
-				checkaccount($paramlist[0], $paramlist[1]); # <account_name> <password>
-			} elsif (@paramlist = ($parameters =~ m/^"(.*)"/)) {
-				checkaccount($paramlist[0], ""); # <account_name> <password>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(.*)/)) {
-				checkaccount($paramlist[0], $paramlist[1]); # <account_name> <password>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
-				checkaccount($paramlist[0], ""); # <account_name> <password>
-			} else {
-				@paramlist = split /\s+/,$parameters;
-				checkaccount($paramlist[0], $paramlist[1]); # <account_name> <password>
-			}
-
-		} elsif ("create" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)\s+(.*)/)) {
-				createaccount($paramlist[0], $paramlist[1], $paramlist[2], $paramlist[3]); # <account_name> <sex> <email> <password>
-			} elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)/)) {
-				createaccount($paramlist[0], $paramlist[1], $paramlist[2], ""); # <account_name> <sex> <email> <password>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)\s+(.*)/)) {
-				createaccount($paramlist[0], $paramlist[1], $paramlist[2], $paramlist[3]); # <account_name> <sex> <email> <password>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)/)) {
-				createaccount($paramlist[0], $paramlist[1], $paramlist[2], ""); # <account_name> <sex> <email> <password>
-			} else {
-				@paramlist = split /\s+/,$parameters;
-				createaccount($paramlist[0], $paramlist[1], $paramlist[2], $paramlist[3]); # <account_name> <sex> <email> <password>
-			}
-
-		} elsif ("del" =~ /^\Q$command/ || "delete" =~ /^\Q$command/) {
-			if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
-				delaccount($paramlist[0]); # <account_name>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
-				delaccount($paramlist[0]); # <account_name>
-			} else {
-				@paramlist = split /\s+/,$parameters,1;
-				delaccount($paramlist[0]); # <account_name>
-			}
-
-		} elsif ("email" =~ /^\Q$command/ && $command ne "e") { # check 1 letter command: 'email', 'end' or 'exit'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
-				changeemail($paramlist[0], $paramlist[1]); # <account_name> <email>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
-				changeemail($paramlist[0], $paramlist[1]); # <account_name> <email>
-			} else {
-				@paramlist = split /\s+/,$parameters;
-				changeemail($paramlist[0], $paramlist[1]); # <account_name> <email>
-			}
-
-		} elsif ("getcount" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
-			getlogincount();
-
-		} elsif ("gm" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
-				changegmlevel($paramlist[0], int($paramlist[1])); # <account_name> <GM_level>
-			} elsif (@paramlist = ($parameters =~ m/^"(.*)"/)) {
-				changegmlevel($paramlist[0], 0); # <account_name> <GM_level>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
-				changegmlevel($paramlist[0], int($paramlist[1])); # <account_name> <GM_level>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
-				changegmlevel($paramlist[0], 0); # <account_name> <GM_level>
-			} else {
-				@paramlist = split /\s+/,$parameters;
-				changegmlevel($paramlist[0], int($paramlist[1])); # <account_name> <GM_level>
-			}
-
-		} elsif ("id" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
-				idaccount($paramlist[0]); # <account_name>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
-				idaccount($paramlist[0]); # <account_name>
-			} else {
-				@paramlist = split /\s+/,$parameters,1;
-				idaccount($paramlist[0]); # <account_name>
-			}
-
-		} elsif ("info" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
-			infoaccount(int($paramlist[0])); # <account_id>
-
-		} elsif ($command eq "kami") { # check all letters command: 'kami' or 'kamib'?
-			@paramlist = split /\s+/,$parameters,1;
-			sendbroadcast(0, $paramlist[0]); # <type> <message>
-
-		} elsif ($command eq "kamib") { # check all letters command: 'kami' or 'kamib'?
-			@paramlist = split /\s+/,$parameters,1;
-			sendbroadcast(0x10, $paramlist[0]); # <type> <message>
-
-		} elsif ("language" =~ /^\Q$command/ && $command ne "l") { # check 1 letter command: 'list' or 'language'?
-			changelanguage($paramlist[0]); # <language>
-
-		} elsif (("list" =~ /^\Q$command/ || $command eq "ls") && $command ne "l") { # check 1 letter command: 'list' or 'language'?
-			listaccount(int($paramlist[0]), int($paramlist[1]), 0); # [start_id [end_id]] 0: to list all
-
-		} elsif (("listban" =~ /^\Q$command/ || $command eq "lsban") && $command ne "l") { # need to specificaly write Ban to have this list # check 1 letter command: 'list' or 'language'?
-			listaccount(int($paramlist[0]), int($paramlist[1]), 3); # [start_id [end_id]] 3: to list only accounts with state or banished
-
-		} elsif (("listgm" =~ /^\Q$command/ || $command eq "lsgm") && $command ne "l") { # need to specificaly write GM to have this list # check 1 letter command: 'list' or 'language'?
-			listaccount(int($paramlist[0]), int($paramlist[1]), 1); # [start_id [end_id]] 1: to list only GM
-
-		} elsif (("listok" =~ /^\Q$command/ || $command eq "lsok") && $command ne "l") { # need to specificaly write OK to have this list # check 1 letter command: 'list' or 'language'?
-			listaccount(int($paramlist[0]), int($paramlist[1]), 4); # [start_id [end_id]] 4: to list only accounts without state and not banished
-
-		} elsif ("memo" =~ /^\Q$command/) {
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(.*)/)) {
-				changememo($paramlist[0], $paramlist[1]); # <account_name> <memo>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(.*)/)) {
-				changememo($paramlist[0], $paramlist[1]); # <account_name> <memo>
-			} else {
-				@paramlist = split /\s+/,$parameters,2;
-				changememo($paramlist[0], $paramlist[1]); # <account_name> <memo>
-			}
-
-		} elsif ("name" =~ /^\Q$command/) {
-			nameaccount(int($paramlist[0])); # <account_id>
-
-		} elsif ("passwd" =~ /^\Q$command/ || "password" =~ /^\Q$command/) {
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(.*)/)) {
-				changepasswd($paramlist[0], $paramlist[1]); # <account_name> <new_password>
-			} elsif (@paramlist = ($parameters =~ m/^"(.*)"/)) {
-				changepasswd($paramlist[0], ""); # <account_name> <new_password>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(.*)/)) {
-				changepasswd($paramlist[0], $paramlist[1]); # <account_name> <new_password>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
-				changepasswd($paramlist[0], ""); # <account_name> <new_password>
-			} else {
-				@paramlist = split /\s+/,$parameters,2;
-				changepasswd($paramlist[0], $paramlist[1]); # <account_name> <new_password>
-			}
-
-		} elsif ("reloadgm" =~ /^\Q$command/) {
-			reloadGM();
-
-		} elsif ("search" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
-		          $command ne "se") { # check 2 letters command: 'search' or 'sex'?
-			if (@paramlist = ($parameters =~ m/^(-{1,2}[re]\S*)\s+(.*)/)) {
-				searchaccount($paramlist[0], $paramlist[1]); # -r/-e/--expr/--regex <expression> | <expression>
-			} else {
-				@paramlist = split /\s+/,$parameters,1;
-				searchaccount($paramlist[0], ""); # -r/-e/--expr/--regex <expression> | <expression>
-			}
-
-		} elsif ("sex" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
-		          $command ne "se") { # check 2 letters command: 'search' or 'sex'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
-				changesex($paramlist[0], $paramlist[1]); # <account_name> <sex>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
-				changesex($paramlist[0], $paramlist[1]); # <account_name> <sex>
-			} else {
-				@paramlist = split /\s+/,$parameters;
-				changesex($paramlist[0], $paramlist[1]); # <account_name> <sex>
-			}
-
-		} elsif ("state" =~ /^\Q$command/ && $command ne "s") { # check 1 letter command: 'search', 'state' or 'sex'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\d+)\s+(.*)/)) {
-				changestate($paramlist[0], int($paramlist[1]), $paramlist[2]); # <account_name> <new_state> <error_message_#7>
-			} elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\d+)/)) {
-				changestate($paramlist[0], int($paramlist[1]), ""); # <account_name> <new_state> <error_message_#7>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\d+)\s+(.*)/)) {
-				changestate($paramlist[0], int($paramlist[1]), $paramlist[2]); # <account_name> <new_state> <error_message_#7>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\d+)/)) {
-				changestate($paramlist[0], int($paramlist[1]), ""); # <account_name> <new_state> <error_message_#7>
-			} else {
-				@paramlist = split /\s+/,$parameters,3;
-				changestate($paramlist[0], int($paramlist[1]), $paramlist[2]); # <account_name> <new_state> <error_message_#7>
-			}
-
-		} elsif (("timeadd" =~ /^\Q$command/ || $command eq "ta") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
-				timeaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
-				timeaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
-			} else {
-				@paramlist = split /\s+/,$parameters;
-				timeaddaccount($paramlist[0], $paramlist[1]); # <account_name> <modifier>
-			}
-
-		} elsif (("timeset" =~ /^\Q$command/ || $command eq "ts") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
-			if (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)\s+(\S+)/)) {
-				timesetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} elsif (@paramlist = ($parameters =~ m/^"(.*)"\s+(\S+)/)) {
-				timesetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)\s+(\S+)/)) {
-				timesetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'\s+(\S+)/)) {
-				timesetaccount($paramlist[0], $paramlist[1], "23:59:59"); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} else {
-				@paramlist = split /\s+/,$parameters;
-				timesetaccount($paramlist[0], $paramlist[1], $paramlist[2]); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			}
-
-		} elsif ($command eq "unban" || ("unbanish" =~ /^\Q$command/ && length($command) >= 4)) {
-			if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
-				bansetaccount($paramlist[0], 0, ""); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
-				bansetaccount($paramlist[0], 0, ""); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			} else {
-				@paramlist = split /\s+/,$parameters,1;
-				bansetaccount($paramlist[0], 0, ""); # <account_name> yyyy/mm/dd [hh:mm:ss]
-			}
-
-		} elsif ("unblock" =~ /^\Q$command/ && length($command) >= 4) {
-			if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
-				changestate($paramlist[0], 0, ""); # <account_name> <new_state> <error_message_#7>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
-				changestate($paramlist[0], 0, ""); # <account_name> <new_state> <error_message_#7>
-			} else {
-				@paramlist = split /\s+/,$parameters,1;
-				changestate($paramlist[0], 0, ""); # <account_name> <new_state> <error_message_#7>
-			}
-
-		} elsif ("version" =~ /^\Q$command/) {
-			checkloginversion();
-
-		} elsif ("who" =~ /^\Q$command/) {
-			if (@paramlist = ($parameters =~ m/^"(.*)"/)) {
-				whoaccount($paramlist[0]); # <account_name>
-			} elsif (@paramlist = ($parameters =~ m/^'(.*)'/)) {
-				whoaccount($paramlist[0]); # <account_name>
-			} else {
-				@paramlist = split /\s+/,$parameters,1;
-				whoaccount($paramlist[0]); # <account_name>
-			}
-
-# quit
-		} elsif ("quit" =~ /^\Q$command/ ||
-		         (("end" =~ /^\Q$command/ || "exit" =~ /^\Q$command/) && $command ne "e")) { # check 1 letter command: 'email', 'end' or 'exit'?
-			last;
-
-# unknown command
-		} elsif ($command) {
-			if ($defaultlanguage eq "F") {
-				print "Commande inconnue [".$command."]\n";
-			} else {
-				print "Unknown command [".$command."]\n";
-			}
-		}
-#		$term->addhistory($cmd) if $command;
-	};
-	if ($@) {
-		if ($defaultlanguage eq "F") {
-			print "Erreur [".$command."]\n$@";
-		} else {
-			print "Error [".$command."]\n$@";
-		}
-	}
-};
-
-# End of the software
-quit();
-
-if ($defaultlanguage eq "F") {
-	print "Au revoir.\n";
-} else {
-	print "Bye.\n";
-}
-exit(0);
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Displaying of the version of the login-server
-sub checkloginversion() {
-	print $so pack("v",30000); # 0x7530
-	$so->flush();
-	$buf = readso(10);
-	# Analyse du Packet
-	my($ret, $maver, $miver, $rev, $dev, $mod, $type, $mdver) = unpack("vc6v", $buf);
-	if ($ret != 30001) { #0x7531
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		exit(6);
-	}
-
-	print "  Login-Server [$loginserverip:$loginserverport]\n";
-	printf "  eAthena version %s-%d.%d", ("stable", "dev")[$dev], $maver, $miver;
-	printf " revision %d", $rev if $rev;
-	printf "%s%d.\n", ("", "-mod")[$mod], $mdver;
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Displaying of the help
-sub displayhelp() {
-	my($help, $receivedcommand) = @_;
-
-	my($command) = lc($receivedcommand); # command in lowercase
-
-	if ($command eq "") {
-		$command = "not a command"; # any value that is not a command
-	}
-
-	if ($command eq "?") {
-		$command = "aide" if ($defaultlanguage eq "F");
-		$command = "help" if ($defaultlanguage ne "F");
-	}
-
-	if ($help eq "aide") {
-		if ("aide" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
-			printf "aide/help/?\n";
-			printf "  Affiche la description des commandes\n";
-			printf "aide/help/? [commande]\n";
-			printf "  Affiche la description de la commande specifiée\n";
-		} elsif ("help" =~ /^\Q$command/) {
-			printf "aide/help/?\n";
-			printf "  Display the description of the commands\n";
-			printf "aide/help/? [command]\n";
-			printf "  Display the description of the specified command\n";
-		} elsif ("add" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
-			printf "add <nomcompte> <sexe> <motdepasse>\n";
-			printf "  Crée un compte avec l'email par défaut (a\@a.com).\n";
-			printf "  Concernant le sexe, seule la première lettre compte (F ou M).\n";
-			printf "  L'e-mail est a\@a.com (e-mail par défaut). C'est comme n'avoir aucun e-mail.\n";
-			printf "  Lorsque motdepasse est omis, la saisie se fait sans que la frappe se voit.\n";
-			printf "  <exemple> add testname Male testpass\n";
-		} elsif ($command eq "ban" || ("banish" =~ /^\Q$command/ && length($command) >= 4)) {
-			printf "ban/banish aaaa/mm/jj hh:mm:ss <nomcompte>\n";
-			printf "  Change la date de fin de bannissement d'un compte.\n";
-			printf "  La différence avec banset est la position du nom du compte.\n";
-		} elsif (("banadd" =~ /^\Q$command/ || $command eq "ba") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
-			printf "banadd <nomcompte> <Modificateur>\n";
-			printf "  Ajoute ou soustrait du temps à la date de banissement d'un compte.\n";
-			printf "  Les modificateurs sont construits comme suit:\n";
-			printf "    Valeur d'ajustement (-1, 1, +1, etc...)\n";
-			printf "    Elément modifié:\n";
-			printf "      a ou y: année\n";
-			printf "      m:      mois\n";
-			printf "      j ou d: jour\n";
-			printf "      h:      heure\n";
-			printf "      mn:     minute\n";
-			printf "      s:      seconde\n";
-			printf "  <exemple> banadd testname +1m-2mn1s-6a\n";
-			printf "            Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n";
-			printf "            et 6 ans dans le même temps.\n";
-			printf "NOTE: Si vous modifez la date de banissement d'un compte non bani,\n";
-			printf "      vous indiquez comme date (le moment actuel +- les ajustements)\n";
-		} elsif (("banset" =~ /^\Q$command/ || $command eq "bs") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
-			printf "banset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n";
-			printf "  Change la date de fin de bannissement d'un compte.\n";
-			printf "  Heure par défaut: 23:59:59\n";
-			printf "banset <nomcompte> 0\n";
-			printf "  Débanni un compte (0 = de-banni).\n";
-		} elsif ("block" =~ /^\Q$command/ && length($command) >= 2) {
-			printf "block <nom compte>\n";
-			printf "  Place le status d'un compte à 5 (You have been blocked by the GM Team).\n";
-			printf "  La commande est l'équivalent de state <nom_compte> 5.\n";
-		} elsif ("check" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
-			printf "check <nomcompte> <motdepasse>\n";
-			printf "  Vérifie la validité d'un mot de passe pour un compte\n";
-			printf "  NOTE: Le serveur n'enverra jamais un mot de passe.\n";
-			printf "        C'est la seule méthode que vous possédez pour savoir\n";
-			printf "        si un mot de passe est le bon. L'autre méthode est\n";
-			printf "        d'avoir un accès ('physique') au fichier des comptes.\n";
-		} elsif ("create" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
-			printf "create <nomcompte> <sexe> <email> <motdepasse>\n";
-			printf "  Comme la commande add, mais avec l'e-mail en plus.\n";
-			printf "  <exemple> create testname Male mon\@mail.com testpass\n";
-		} elsif ("del" =~ /^\Q$command/ || "delete" =~ /^\Q$command/) {
-			printf "del <nomcompte>\n";
-			printf "  Supprime un compte.\n";
-			printf "  La commande demande confirmation. Après confirmation, le compte est détruit.\n";
-		} elsif ("email" =~ /^\Q$command/ && $command ne "e") { # check 1 letter command: 'email', 'end' or 'exit'?
-			printf "email <nomcompte> <email>\n";
-			printf "  Modifie l'e-mail d'un compte.\n";
-		} elsif ("getcount" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
-			printf "getcount\n";
-			printf "  Donne le nombre de joueurs en ligne par serveur de char.\n";
-		} elsif ("gm" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
-			printf "gm <nomcompte> [Niveau_GM]\n";
-			printf "  Modifie le niveau de GM d'un compte.\n";
-			printf "  Valeur par défaut: 0 (suppression du niveau de GM).\n";
-			printf "  <exemple> gm nomtest 80\n";
-		} elsif ("id" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
-			printf "id <nomcompte>\n";
-			printf "  Donne l'id d'un compte.\n";
-		} elsif ("info" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
-			printf "info <idcompte>\n";
-			printf "  Affiche les informations sur un compte.\n";
-		} elsif ($command eq "kami") { # check all letters command: 'kami' or 'kamib'?
-			printf "kami <message>\n";
-			printf "  Envoi un message général sur tous les serveurs de map (en jaune).\n";
-		} elsif ($command eq "kamib") { # check all letters command: 'kami' or 'kamib'?
-			printf "kamib <message>\n";
-			printf "  Envoi un message général sur tous les serveurs de map (en bleu).\n";
-		} elsif ("language" =~ /^\Q$command/ && $command ne "l") { # check 1 letter command: 'list' or 'language'?
-			printf("language <langue>\n");
-			printf("  Change la langue d'affichage.\n");
-			printf("  Langues possibles: 'Français' ou 'English'.\n");
-		} elsif (("list" =~ /^\Q$command/ || $command eq "ls") && $command ne "l") { # check 1 letter command: 'list' or 'language'?
-			printf "list/ls [Premier_id [Dernier_id]]\n";
-			printf "  Affiche une liste de comptes.\n";
-			printf "  'Premier_id', 'Dernier_id': indique les identifiants de départ et de fin.\n";
-			printf "  La recherche par nom n'est pas possible avec cette commande.\n";
-			printf "  <example> list 10 9999999\n";
-		} elsif (("listban" =~ /^\Q$command/ || $command eq "lsban") && $command ne "l") { # need to specificaly write Ban to have this list # check 1 letter command: 'list' or 'language'?
-			printf "listBan/lsBan [Premier_id [Dernier_id]]\n";
-			printf "  Comme list/ls, mais seulement pour les comptes GM avec un statut ou bannis.\n";
-		} elsif (("listgm" =~ /^\Q$command/ || $command eq "lsgm") && $command ne "l") { # need to specificaly write GM to have this list # check 1 letter command: 'list' or 'language'?
-			printf "listGM/lsGM [Premier_id [Dernier_id]]\n";
-			printf "  Comme list/ls, mais seulement pour les comptes GM.\n";
-		} elsif (("listok" =~ /^\Q$command/ || $command eq "lsok") && $command ne "l") { # need to specificaly write OK to have this list # check 1 letter command: 'list' or 'language'?
-			printf "listOK/lsOK [Premier_id [Dernier_id]]\n";
-			printf "  Comme list/ls, mais seulement pour les comptes sans statut et non bannis.\n";
-		} elsif ("memo" =~ /^\Q$command/) {
-			printf "memo <nomcompte> <memo>\n";
-			printf "  Modifie le mémo d'un compte.\n";
-			printf "  'memo': Il peut avoir jusqu'à 253 caractères (avec des espaces ou non).\n";
-		} elsif ("name" =~ /^\Q$command/) {
-			printf "name <idcompte>\n";
-			printf "  Donne le nom d'un compte.\n";
-		} elsif ("passwd" =~ /^\Q$command/ || "password" =~ /^\Q$command/) {
-			printf "passwd <nomcompte> <nouveaumotdepasse>\n";
-			printf "  Change le mot de passe d'un compte.\n";
-			printf "  Lorsque nouveaumotdepasse est omis,\n";
-			printf "  la saisie se fait sans que la frappe ne se voit.\n";
-		} elsif ("reloadgm" =~ /^\Q$command/) {
-			printf "reloadGM\n";
-			printf "  Reload GM configuration file\n";
-		} elsif ("search" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
-		          $command ne "se") { # check 2 letters command: 'search' or 'sex'?
-			printf "search <expression>\n";
-			printf "  Cherche des comptes.\n";
-			printf "  Affiche les comptes dont les noms correspondent.\n";
-			printf "search -r/-e/--expr/--regex <expression>\n";
-			printf "  Cherche des comptes par expression regulière.\n";
-			printf "  Affiche les comptes dont les noms correspondent.\n";
-		} elsif ("sex" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
-		          $command ne "se") { # check 2 letters command: 'search' or 'sex'?
-			printf "sex <nomcompte> <sexe>\n";
-			printf "  Modifie le sexe d'un compte.\n";
-			printf "  <exemple> sex testname Male\n";
-		} elsif ("state" =~ /^\Q$command/ && $command ne "s") { # check 1 letter command: 'search', 'state' or 'sex'?
-			printf "state <nomcompte> <nouveaustatut> <message_erreur_7>\n";
-			printf "  Change le statut d'un compte.\n";
-			printf "  'nouveaustatut': Le statut est le même que celui du packet 0x006a + 1.\n";
-			printf "               les possibilités sont:\n";
-			printf "               0 = Compte ok\n";
-			printf "               1 = Unregistered ID\n";
-			printf "               2 = Incorrect Password\n";
-			printf "               3 = This ID is expired\n";
-			printf "               4 = Rejected from Server\n";
-			printf "               5 = You have been blocked by the GM Team\n";
-			printf "               6 = Your Game's EXE file is not the latest version\n";
-			printf "               7 = You are Prohibited to log in until...\n";
-			printf "               8 = Server is jammed due to over populated\n";
-			printf "               9 = No MSG\n";
-			printf "               100 = This ID has been totally erased\n";
-			printf "               all other values are 'No MSG', then use state 9 please.\n";
-			printf "  'message_erreur_7': message du code erreur 6 =\n";
-			printf "                      = Your are Prohibited to log in until... (packet 0x006a)\n";
-		} elsif (("timeadd" =~ /^\Q$command/ || $command eq "ta") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
-			printf "timeadd <nomcompte> <modificateur>\n";
-			printf "  Ajoute/soustrait du temps à la limite de validité d'un compte.\n";
-			printf "  Le modificateur est composé comme suit:\n";
-			printf "    Valeur modificatrice (-1, 1, +1, etc...)\n";
-			printf "    Elément modifié:\n";
-			printf "      a ou y: année\n";
-			printf "      m:      mois\n";
-			printf "      j ou d: jour\n";
-			printf "      h:      heure\n";
-			printf "      mn:     minute\n";
-			printf "      s:      seconde\n";
-			printf "  <exemple> timeadd testname +1m-2mn1s-6a\n";
-			printf "            Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n";
-			printf "            et 6 ans dans le même temps.\n";
-			printf "NOTE: Vous ne pouvez pas modifier une limite de validité illimitée. Si vous\n";
-			printf "      désirez le faire, c'est que vous voulez probablement créer un limite de\n";
-			printf "      validité limitée. Donc, en premier, fixé une limite de valitidé.\n";
-		} elsif (("timeset" =~ /^\Q$command/ || $command eq "ts") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
-			printf "timeset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n";
-			printf "  Change la limite de validité d'un compte.\n";
-			printf "  Heure par défaut: 23:59:59\n";
-			printf "timeset <nomcompte> 0\n";
-			printf "  Donne une limite de validité illimitée (0 = illimitée).\n";
-		} elsif ($command eq "unban" || ("unbanish" =~ /^\Q$command/ && length($command) >= 4)) {
-			printf "unban/unbanish <nom compte>\n";
-			printf "  Ote le banissement d'un compte.\n";
-			printf "  La commande est l'équivalent de banset <nom_compte> 0.\n";
-		} elsif ("unblock" =~ /^\Q$command/ && length($command) >= 4) {
-			printf "unblock <nom compte>\n";
-			printf "  Place le status d'un compte à 0 (Compte ok).\n";
-			printf "  La commande est l'équivalent de state <nom_compte> 0.\n";
-		} elsif ("version" =~ /^\Q$command/) {
-			printf "version\n";
-			printf "  Affiche la version du login-serveur.\n";
-		} elsif ("who" =~ /^\Q$command/) {
-			printf "who <nomcompte>\n";
-			printf "  Affiche les informations sur un compte.\n";
-		} elsif ("quit" =~ /^\Q$command/ ||
-		         (("end" =~ /^\Q$command/ || "exit" =~ /^\Q$command/) && $command ne "e")) { # check 1 letter command: 'email', 'end' or 'exit'?\n";
-			printf "quit/end/exit\n";
-			printf "  Fin du programme d'administration.\n";
-		} else {
-			if ($receivedcommand ne "") {
-				printf "Commande inconnue [%s] pour l'aide. Affichage de toutes les commandes.\n", $receivedcommand;
-			}
-			print << "ENDOFAIDE";
- aide/help/?                             -- Affiche cet aide
- aide/help/? [commande]                  -- Affiche l'aide de la commande
- add <nomcompte> <sexe> <motdepasse>     -- Crée un compte (sans email)
- ban/banish aaaa/mm/jj hh:mm:ss <nomcompte>-- Change la date finale de banismnt
- banadd/ba <nomcompte> <modificateur>    -- Ajout/soustrait du temps à la
-   exemple: ba moncompte +1m-2mn1s-2y       date finale de banissement
- banset/bs <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la date fin de banisemnt
- banset/bs <nomcompte> 0                 -- Dé-banis un compte.
- block <nom compte>  -- Mets le status d'un compte à 5 (blocked by the GM Team)
- check <nomcompte> <motdepasse>          -- Vérifie un mot de passe d'un compte
- create <nomcompte> <sexe> <email> <motdepasse> -- Crée un compte (avec email)
- del <nomcompte>                         -- Supprime un compte
- email <nomcompte> <email>               -- Modifie l'e-mail d'un compte
- getcount                                -- Donne le nb de joueurs en ligne
- gm <nomcompte> [Niveau_GM]              -- Modifie le niveau de GM d'un compte
- id <nomcompte>                          -- Donne l'id d'un compte
- info <idcompte>                         -- Affiche les infos sur un compte
- kami <message>                          -- Envoi un message général (en jaune)
- kamib <message>                         -- Envoi un message général (en bleu)
- language <langue>                       -- Change la langue d'affichage.
- list/ls [Premier_id [Dernier_id] ]      -- Affiche une liste de comptes
- listBan/lsBan [Premier_id [Dernier_id] ]-- Affiche une liste de comptes
-                                            avec un statut ou bannis
- listGM/lsGM [Premier_id [Dernier_id] ]  -- Affiche une liste de comptes GM
- listOK/lsOK [Premier_id [Dernier_id] ]  -- Affiche une liste de comptes
-                                            sans status et non bannis
- memo <nomcompte> <memo>                 -- Modifie le memo d'un compte
- name <idcompte>                         -- Donne le nom d'un compte
- passwd <nomcompte> <nouveaumotdepasse>  -- Change le mot de passe d'un compte
- quit/end/exit                           -- Fin du programme d'administation
- reloadGM                              -- Recharger le fichier de config des GM
- search <expression>                     -- Cherche des comptes
- search -e/-r/--expr/--regex <expression> -- Cherche des comptes par REGEX
- sex <nomcompte> <sexe>                  -- Modifie le sexe d'un compte
- state <nomcompte> <nouveaustatut> <messageerr7> -- Change le statut d'1 compte
- timeadd/ta <nomcompte> <modificateur>   -- Ajout/soustrait du temps à la
-   exemple: ta moncompte +1m-2mn1s-2y       limite de validité
- timeset/ts <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la limite de validité
- timeset/ts <nomcompte> 0                -- limite de validité = illimitée
- unban/unbanish <nom compte>             -- Ote le banissement d'un compte
- unblock <nom compte>            -- Mets le status d'un compte à 0 (Compte ok)
- version                                 -- Donne la version du login-serveur
- who <nomcompte>                         -- Affiche les infos sur un compte
-ENDOFAIDE
-			printf(" Note: Pour les noms de compte avec des espaces, tapez \"<nom compte>\" (ou ').\n");
-		}
-	} else {
-		if ("aide" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
-			printf "aide/help/?\n";
-			printf "  Display the description of the commands\n";
-			printf "aide/help/? [command]\n";
-			printf "  Display the description of the specified command\n";
-		} elsif ("help" =~ /^\Q$command/) {
-			printf "aide/help/?\n";
-			printf "  Display the description of the commands\n";
-			printf "aide/help/? [command]\n";
-			printf "  Display the description of the specified command\n";
-		} elsif ("add" =~ /^\Q$command/ && $command ne "a") { # check 1 letter command: 'aide' or 'add'?
-			printf "add <account_name> <sex> <password>\n";
-			printf "  Create an account with the default email (a\@a.com).\n";
-			printf "  Concerning the sex, only the first letter is used (F or M).\n";
-			printf "  The e-mail is set to a\@a.com (default e-mail). It's like to have no e-mail.\n";
-			printf "  When the password is omitted,\n";
-			printf "  the input is done without displaying of the pressed keys.\n";
-			printf "  <example> add testname Male testpass\n";
-		} elsif ($command eq "ban" || ("banish" =~ /^\Q$command/ && length($command) >= 4)) {
-			printf "ban/banish yyyy/mm/dd hh:mm:ss <account_name>\n";
-			printf "  Changes the final date of a banishment of an account.\n";
-			printf "  The difference with banset is the position of the account name.\n";
-		} elsif (("banadd" =~ /^\Q$command/ || $command eq "ba") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
-			printf "banadd <account_name> <modifier>\n";
-			printf "  Adds or substracts time from the final date of a banishment of an account.\n";
-			printf "  Modifier is done as follows:\n";
-			printf "    Adjustment value (-1, 1, +1, etc...)\n";
-			printf "    Modified element:\n";
-			printf "      a or y: year\n";
-			printf "      m:  month\n";
-			printf "      j or d: day\n";
-			printf "      h:  hour\n";
-			printf "      mn: minute\n";
-			printf "      s:  second\n";
-			printf "  <example> banadd testname +1m-2mn1s-6y\n";
-			printf "            this example adds 1 month and 1 second, and substracts 2 minutes\n";
-			printf "            and 6 years at the same time.\n";
-			printf "NOTE: If you modify the final date of a non-banished account,\n";
-			printf "      you fix the final date to (actual time +- adjustments)\n";
-		} elsif (("banset" =~ /^\Q$command/ || $command eq "bs") && $command ne "b") { # check 1 letter command: 'ba' or 'bs'?
-			printf "banset <account_name> yyyy/mm/dd [hh:mm:ss]\n";
-			printf "  Changes the final date of a banishment of an account.\n";
-			printf "  Default time: 23:59:59\n";
-			printf "banset <account_name> 0\n";
-			printf "  Set a non-banished account (0 = unbanished).\n";
-		} elsif ("block" =~ /^\Q$command/ && length($command) >= 2) {
-			printf "block <account name>\n";
-			printf "  Set state 5 (You have been blocked by the GM Team) to an account.\n";
-			printf "  Same command of state <account_name> 5.\n";
-		} elsif ("check" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
-			printf "check <account_name> <password>\n";
-			printf "  Check the validity of a password for an account.\n";
-			printf "  NOTE: Server will never sends back a password.\n";
-			printf "        It's the only method you have to know if a password is correct.\n";
-			printf "        The other method is to have a ('physical') access to the accounts file.\n";
-		} elsif ("create" =~ /^\Q$command/ && $command ne "c") { # check 1 letter command: 'check' or 'create'?
-			printf "create <account_name> <sex> <email> <password>\n";
-			printf "  Like the 'add' command, but with e-mail moreover.\n";
-			printf "  <example> create testname Male my\@mail.com testpass\n";
-		} elsif ("del" =~ /^\Q$command/ || "delete" =~ /^\Q$command/) {
-			printf "del <account_name>\n";
-			printf "  Remove an account.\n";
-			printf "  This order requires confirmation. After confirmation, the account is deleted.\n";
-		} elsif ("email" =~ /^\Q$command/ && $command ne "e") { # check 1 letter command: 'email', 'end' or 'exit'?
-			printf "email <account_name> <email>\n";
-			printf "  Modify the e-mail of an account.\n";
-		} elsif ("getcount" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
-			printf "getcount\n";
-			printf "  Give the number of players online on all char-servers.\n";
-		} elsif ("gm" =~ /^\Q$command/ && $command ne "g") { # check 1 letter command: 'getcount' or 'gm'?
-			printf "gm <account_name> [GM_level]\n";
-			printf "  Modify the GM level of an account.\n";
-			printf "  Default value remove GM level (GM level = 0).\n";
-			printf "  <example> gm testname 80\n";
-		} elsif ("id" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
-			printf "id <account_name>\n";
-			printf "  Give the id of an account.\n";
-		} elsif ("info" =~ /^\Q$command/ && $command ne "i") { # check 1 letter command: 'id' or 'info'?
-			printf "info <account_id>\n";
-			printf "  Display complete information of an account.\n";
-		} elsif ($command eq "kami") { # check all letters command: 'kami' or 'kamib'?
-			printf "kami <message>\n";
-			printf "  Sends a broadcast message on all map-server (in yellow).\n";
-		} elsif ($command eq "kamib") { # check all letters command: 'kami' or 'kamib'?
-			printf "kamib <message>\n";
-			printf "  Sends a broadcast message on all map-server (in blue).\n";
-		} elsif ("language" =~ /^\Q$command/ && $command ne "l") { # check 1 letter command: 'list' or 'language'?
-			printf("language <language>\n");
-			printf("  Change the language of displaying.\n");
-			printf("  Possible languages: Français or English.\n");
-		} elsif (("list" =~ /^\Q$command/ || $command eq "ls") && $command ne "l") { # check 1 letter command: 'list' or 'language'?
-			printf "list/ls [start_id [end_id]]\n";
-			printf "  Display a list of accounts.\n";
-			printf "  'start_id', 'end_id': indicate end and start identifiers.\n";
-			printf "  Research by name is not possible with this command.\n";
-			printf "  <example> list 10 9999999\n";
-		} elsif (("listban" =~ /^\Q$command/ || $command eq "lsban") && $command ne "l") { # need to specificaly write Ban to have this list # check 1 letter command: 'list' or 'language'?
-			printf "listBan/lsBan [start_id [end_id]]\n";
-			printf "  Like list/ls, but only for accounts with state or banished.\n";
-		} elsif (("listgm" =~ /^\Q$command/ || $command eq "lsgm") && $command ne "l") { # need to specificaly write GM to have this list # check 1 letter command: 'list' or 'language'?
-			printf "listGM/lsGM [start_id [end_id]]\n";
-			printf "  Like list/ls, but only for GM accounts.\n";
-		} elsif (("listok" =~ /^\Q$command/ || $command eq "lsok") && $command ne "l") { # need to specificaly write OK to have this list # check 1 letter command: 'list' or 'language'?
-			printf "listOK/lsOK [start_id [end_id]]\n";
-			printf "  Like list/ls, but only for accounts without state and not banished.\n";
-		} elsif ("memo" =~ /^\Q$command/) {
-			printf "memo <account_name> <memo>\n";
-			printf "  Modify the memo of an account.\n";
-			printf "  'memo': it can have until 253 characters (with spaces or not).\n";
-		} elsif ("name" =~ /^\Q$command/) {
-			printf "name <account_id>\n";
-			printf "  Give the name of an account.\n";
-		} elsif ("passwd" =~ /^\Q$command/ || "password" =~ /^\Q$command/) {
-			printf "passwd <account_name> <new_password>\n";
-			printf "  Change the password of an account.\n";
-			printf "  When new password is omitted,\n";
-			printf "  the input is done without displaying of the pressed keys.\n";
-		} elsif ("reloadgm" =~ /^\Q$command/) {
-			printf "reloadGM\n";
-			printf "  Reload GM configuration file\n";
-		} elsif ("search" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
-		          $command ne "se") { # check 2 letters command: 'search' or 'sex'?
-			printf "search <expression>\n";
-			printf "  Seek accounts.\n";
-			printf "  Displays the accounts whose names correspond.\n";
-			printf "search -r/-e/--expr/--regex <expression>\n";
-			printf "  Seek accounts by regular expression.\n";
-			printf "  Displays the accounts whose names correspond.\n";
-		} elsif ("sex" =~ /^\Q$command/ && $command ne "s" && # check 1 letter command: 'search', 'state' or 'sex'?
-		          $command ne "se") { # check 2 letters command: 'search' or 'sex'?
-			printf "sex <account_name> <sex>\n";
-			printf "  Modify the sex of an account.\n";
-			printf "  <example> sex testname Male\n";
-		} elsif ("state" =~ /^\Q$command/ && $command ne "s") { # check 1 letter command: 'search', 'state' or 'sex'?
-			printf "state <account_name> <new_state> <error_message_#7>\n";
-			printf "  Change the state of an account.\n";
-			printf "  'new_state': state is the state of the packet 0x006a + 1.\n";
-			printf "               The possibilities are:\n";
-			printf "               0 = Account ok\n";
-			printf "               1 = Unregistered ID\n";
-			printf "               2 = Incorrect Password\n";
-			printf "               3 = This ID is expired\n";
-			printf "               4 = Rejected from Server\n";
-			printf "               5 = You have been blocked by the GM Team\n";
-			printf "               6 = Your Game's EXE file is not the latest version\n";
-			printf "               7 = You are Prohibited to log in until...\n";
-			printf "               8 = Server is jammed due to over populated\n";
-			printf "               9 = No MSG\n";
-			printf "               100 = This ID has been totally erased\n";
-			printf "               all other values are 'No MSG', then use state 9 please.\n";
-			printf "  'error_message_#7': message of the code error 6\n";
-			printf "                      = Your are Prohibited to log in until... (packet 0x006a)\n";
-		} elsif (("timeadd" =~ /^\Q$command/ || $command eq "ta") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
-			printf "timeadd <account_name> <modifier>\n";
-			printf "  Adds or substracts time from the validity limit of an account.\n";
-			printf "  Modifier is done as follows:\n";
-			printf "    Adjustment value (-1, 1, +1, etc...)\n";
-			printf "    Modified element:\n";
-			printf "      a or y: year\n";
-			printf "      m:  month\n";
-			printf "      j or d: day\n";
-			printf "      h:  hour\n";
-			printf "      mn: minute\n";
-			printf "      s:  second\n";
-			printf "  <example> timeadd testname +1m-2mn1s-6y\n";
-			printf "            this example adds 1 month and 1 second, and substracts 2 minutes\n";
-			printf "            and 6 years at the same time.\n";
-			printf "NOTE: You can not modify a unlimited validity limit.\n";
-			printf "      If you want modify it, you want probably create a limited validity limit.\n";
-			printf "      So, at first, you must set the validity limit to a date/time.\n";
-		} elsif (("timeset" =~ /^\Q$command/ || $command eq "ts") && $command ne "t") { # check 1 letter command: 'ta' or 'ts'?
-			printf "timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n";
-			printf "  Changes the validity limit of an account.\n";
-			printf "  Default time: 23:59:59\n";
-			printf "timeset <account_name> 0\n";
-			printf "  Gives an unlimited validity limit (0 = unlimited).\n";
-		} elsif ($command eq "unban" || ("unbanish" =~ /^\Q$command/ && length($command) >= 4)) {
-			printf "unban/unbanish <account name>\n";
-			printf "  Remove the banishment of an account.\n";
-			printf "  This command works like banset <account_name> 0.\n";
-		} elsif ("unblock" =~ /^\Q$command/ && length($command) >= 4) {
-			printf "unblock <account name>\n";
-			printf "  Set state 0 (Account ok) to an account.\n";
-			printf "  This command works like state <account_name> 0.\n";
-		} elsif ("version" =~ /^\Q$command/) {
-			printf "version\n";
-			printf "  Display the version of the login-server.\n";
-		} elsif ("who" =~ /^\Q$command/) {
-			printf "who <account_name>\n";
-			printf "  Displays complete information of an account.\n";
-		} elsif ("quit" =~ /^\Q$command/ ||
-		         (("end" =~ /^\Q$command/ || "exit" =~ /^\Q$command/) && $command ne "e")) { # check 1 letter command: 'email', 'end' or 'exit'?\n";
-			printf "quit/end/exit\n";
-			printf "  End of the program of administration.\n";
-		} else {
-			if ($receivedcommand ne "") {
-				printf "Unknown command [%s] for help. Displaying of all commands.\n", $receivedcommand;
-			}
-			print << "ENDOFHELP";
- aide/help/?                          -- Display this help
- aide/help/? [command]                -- Display the help of the command
- add <account_name> <sex> <password>  -- Create an account with default email
- ban/banish yyyy/mm/dd hh:mm:ss <account_name> -- Change final date of a ban
- banadd/ba <account_name> <modifier>  -- Add or substract time from the final
-   example: ba apple +1m-2mn1s-2y        date of a banishment of an account
- banset/bs <account_name> yyyy/mm/dd [hh:mm:ss] -- Change final date of a ban
- banset/bs <account_name> 0           -- Un-banish an account
- block <account name>    -- Set state 5 (blocked by the GM Team) to an account
- check <account_name> <password>      -- Check the validity of a password
- create <account_name> <sex> <email> <passwrd> -- Create an account with email
- del <account_name>                   -- Remove an account
- email <account_name> <email>         -- Modify an email of an account
- getcount                             -- Give the number of players online
- gm <account_name> [GM_level]         -- Modify the GM level of an account
- id <account_name>                    -- Give the id of an account
- info <account_id>                    -- Display all information of an account
- kami <message>                       -- Sends a broadcast message (in yellow)
- kamib <message>                      -- Sends a broadcast message (in blue)
- language <language>                  -- Change the language of displaying.
- list/ls [First_id [Last_id]]         -- Display a list of accounts
- listBan/lsBan [First_id [Last_id]]   -- Display a list of accounts
-                                         with state or banished
- listGM/lsGM [First_id [Last_id]]     -- Display a list of GM accounts
- listOK/lsOK [First_id [Last_id]]     -- Display a list of accounts
-                                         without state and not banished
- memo <account_name> <memo>           -- Modify the memo of an account
- name <account_id>                    -- Give the name of an account
- passwd <account_name> <new_password> -- Change the password of an account
- quit/end/exit                        -- End of the program of administation
- reloadGM                             -- Reload GM configuration file
- search <expression>                  -- Seek accounts
- search -e/-r/--expr/--regex <expressn> -- Seek accounts by regular-expression
- sex <nomcompte> <sexe>               -- Modify the sex of an account
- state <account_name> <new_state> <error_message_#7> -- Change the state
- timeadd/ta <account_name> <modifier> -- Add or substract time from the
-   example: ta apple +1m-2mn1s-2y        validity limit of an account
- timeset/ts <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit
- timeset/ts <account_name> 0         -- Give a unlimited validity limit
- unban/unbanish <account name>       -- Remove the banishment of an account
- unblock <account name>              -- Set state 0 (Account ok) to an account
- version                             -- Gives the version of the login-server
- who <account_name>                  -- Display all information of an account
-ENDOFHELP
-			printf(" Note: To use spaces in an account name, type \"<account name>\" (or ').\n");
-		}
-	}
-
-	return 0;
-}
-#--------------------------------------------------------------------------
-
-# Sub-function: Displaying of the accounts list
-sub listaccount() {
-	my($st, $ed, $listflag) = @_;
-	my($i);
-	my($n) = (0);
-	#      0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567
-	if ($defaultlanguage eq "F") {
-		print " id_compte GM nom_utilisateur         sexe   count statut\n";
-	} else {
-		print "account_id GM user_name               sex    count state\n";
-	}
-	print "-------------------------------------------------------------------------------\n";
-	while(1) {
-		print $so pack("vV2", 0x7920, $st, $ed);
-		$so->flush();
-		$buf = readso(4);
-		if (unpack("v", $buf) != 0x7921) {
-			if ($defaultlanguage eq "F") {
-				print "Problème de connexion au serveur (réponse incorrecte).\n";
-			} else {
-				print "Connection error to the server (incorrect answer).\n";
-			}
-			exit(10);
-		}
-		my($len) = unpack("x2v", $buf);
-		last if ($len <= 4);
-		for($i = 4; $i < $len; $i += 38) {
-			my(@dat) = unpack("VCa24cVV", readso(38));
-			$st = $dat[0] + 1;
-			if ($listflag == 0 ||
-			    ($listflag == 1 && $dat[1] > 0) || # check GM flag
-			    ($listflag == 3 && $dat[5] != 0) || # check with state or banished
-			    ($listflag == 4 && $dat[5] == 0)) { # check without state and not banished
-				printf "%10d %2s %-24s%-5s %6d %-27s\n", $dat[0],
-				        ($dat[1] == 0 ? "  " : $dat[1]),
-				        $dat[2],
-				        ($defaultlanguage eq "F" ? ("Femme","Male","Servr")[$dat[3]] : ("Femal","Male","Servr")[$dat[3]]),
-				        $dat[4],
-				        (($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"),
-				         "Unregistered ID",
-				         "Incorrect Password",
-				         "This ID is expired",
-				         "Rejected from Server",
-				         "Blocked by the GM Team", # You have been blocked by the GM Team
-				         "Your EXE file is too old", # Your Game's EXE file is not the latest version
-				         "Banishement or\n                                                   Prohibited to login until %s", # You are Prohibited to log in until %s
-				         "Server is over populated", # Server is jammed due to over populated
-				         "No MSG",
-				         "This ID is totally erased")[$dat[5] == 100 ? 10 : $dat[5]]; # This ID has been totally erased
-				$n++;
-			}
-		}
-	}
-	if ($defaultlanguage eq "F") {
-		if ($n == 0) {
-			print "Aucun compte trouvé.\n";
-		} elsif ($n == 1) {
-			print "1 compte trouvé.\n";
-		} else {
-			print "$n comptes trouvés.\n";
-		}
-	} else {
-		if ($n == 0) {
-			print "No account found.\n";
-		} elsif ($n == 1) {
-			print "1 account found.\n";
-		} else {
-			print "$n accounts found.\n";
-		}
-	}
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: add an account with the default e-mail
-sub addaccount() {
-	my($userid, $sex, $passwd) = @_;
-	if ($userid eq "" || !defined($userid)) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple> add nomtest Male motdepassetest\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example> add testname Male testpass\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-#	if ($userid =~ /[^A-Za-z0-9\@-_]/) {
-#		if ($defaultlanguage eq "F") {
-#			print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n";
-#		} else {
-#			print "Illegal character found in the account name ".$`."[${&}]${'}\n";
-#		}
-#		return 101;
-#	}
-	$sex = uc(substr($sex, 0, 1));
-	if ($sex !~ /^[MF]$/) {
-		if ($defaultlanguage eq "F") {
-			print "Sexe incorrect [$sex]. Entrez M ou F svp.\n";
-		} else {
-			print "Illegal gender [$sex]. Please input M or F.\n";
-		}
-		return 103;
-	}
-	if ($passwd eq "") {
-		return 108 if (($passwd = typepasswd()) eq "");
-	}
-	if (verify_password($passwd) == 0) {
-		return 104;
-	}
-	print $so pack("va24a24a1a40", 0x7930, $userid, $passwd, $sex, "");
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7931) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 106;
-	}
-	$buf = readso(28);
-	if (unpack("V", $buf) == -1 || unpack("V", $buf) == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Echec à la création du compte [$userid]. Un compte identique existe déjà.\n";
-		} else {
-			print "Account [$userid] creation failed. Same account already exists.\n";
-		}
-		return 107;
-	} else {
-		if ($defaultlanguage eq "F") {
-			printf "Compte [$userid] créé avec succès [id: %d].\n", unpack("V",$buf);
-		} else {
-			printf "Account [$userid] is successfully created [id: %d].\n", unpack("V",$buf);
-		}
-	}
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: add an account with an e-mail
-sub createaccount() {
-	my($userid, $sex, $email, $passwd) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple> create nomtest Male mon\@email.com motdepassetest\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example> create testname Male my\@mail.com testpass\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-#	if ($userid =~ /[^A-Za-z0-9\@-_]/) {
-#		if ($defaultlanguage eq "F") {
-#			print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n";
-#		} else {
-#			print "Illegal character found in the account name ".$`."[${&}]${'}\n";
-#		}
-#		return 101;
-#	}
-	$sex = uc(substr($sex, 0, 1));
-	if ($sex !~ /^[MF]$/) {
-		if ($defaultlanguage eq "F") {
-			print "Sexe incorrect [$sex]. Entrez M ou F svp.\n";
-		} else {
-			print "Illegal gender [$sex]. Please input M or F.\n";
-		}
-		return 103;
-	}
-	if (length($email) < 3) {
-		if ($defaultlanguage eq "F") {
-			print "Email trop courte [$email]. Entrez une e-mail valide svp.\n";
-		} else {
-			print "Email is too short [$email]. Please input a valid e-mail.\n";
-		}
-		return 109;
-	}
-	if (length($email) > 39) {
-		if ($defaultlanguage eq "F") {
-			print "Email trop longue [$email]. Entrez une e-mail de 39 caractères maximum svp.\n";
-		} else {
-			print "Email is too long [$email]. Please input an e-mail with 39 bytes at the most.\n";
-		}
-		return 109;
-	}
-	if (verify_email($email) == 0) {
-		if ($defaultlanguage eq "F") {
-			print "Email incorrecte [$email]. Entrez une e-mail valide svp.\n";
-		} else {
-			print "Invalid email [$email]. Please input a valid e-mail.\n";
-		}
-		return 109;
-	}
-	if ($passwd eq "") {
-		return 108 if (($passwd = typepasswd()) eq "");
-	}
-	if (verify_password($passwd) == 0) {
-		return 104;
-	}
-	print $so pack("va24a24a1a40", 0x7930, $userid, $passwd, $sex, $email);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7931) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 106;
-	}
-	$buf = readso(28);
-	if (unpack("V", $buf) == -1 || unpack("V", $buf) == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Echec à la création du compte [$userid]. Un compte identique existe déjà.\n";
-		} else {
-			print "Account [$userid] creation failed. Same account already exists.\n";
-		}
-		return 107;
-	} else {
-		if ($defaultlanguage eq "F") {
-			printf "Compte [$userid] créé avec succès [id: %d].\n", unpack("V",$buf);
-		} else {
-			printf "Account [$userid] is successfully created [id: %d].\n", unpack("V",$buf);
-		}
-	}
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: deletion of an account
-sub delaccount() {
-	my($userid) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple> del nomtestasupprimer\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example> del testnametodelete\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-	if ($defaultlanguage eq "F") {
-		print "** Etes-vous vraiment sûr de vouloir SUPPRIMER le compte [$userid]? (o/n) ";
-	} else {
-		print "** Are you really sure to DELETE account [$userid]? (y/n) ";
-	}
-	if (lc(substr(<STDIN>, 0, 1)) !~ /[oy]/) {
-		if ($defaultlanguage eq "F") {
-			print "Suppression annulée\n.";
-		} else {
-			print "Deletion canceled\n";
-		}
-		return 121;
-	}
-	print $so pack("va24", 0x7932, $userid);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7933) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 122;
-	}
-	$buf = readso(28);
-	my($id2, $name) = unpack("Va24", $buf);
-	while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
-		chop($name);
-	};
-	if ($id2 == -1 || $id2 == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Echec de la suppression du compte [$userid]. Le compte n'existe pas.\n";
-		} else {
-			print "Account [$userid] deletion failed. Account doesn't exist.\n";
-		}
-		return 123;
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Compte [$name][id: $id2] SUPPRIME avec succès.\n";
-		} else {
-			print "Account [$name][id: $id2] is successfully DELETED.\n";
-		}
-	}
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: modification of a password
-sub changepasswd() {
-	my($userid, $passwd) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple> passwd nomtest nouveaumotdepasse\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example> passwd testname newpassword\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-	if ($passwd eq "") {
-		return 134 if (($passwd = typepasswd()) eq "");
-	}
-	if (verify_password($passwd) == 0) {
-		return 131;
-	}
-	print $so pack("va24a24", 0x7934, $userid,$passwd);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7935) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 132;
-	}
-	$buf = readso(28);
-	my($id2, $name) = unpack("Va24", $buf);
-	while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
-		chop($name);
-	};
-	if ($id2 == -1 || $id2 == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Echec de la modification du mot de passe du compte [$userid].\n";
-			print "Le compte [$userid] n'existe pas.\n";
-		} else {
-			print "Account [$userid] password changing failed.\n";
-			print "Account [$userid] doesn't exist.\n";
-		}
-		return 133;
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Modification du mot de passe du compte [$name][id: $id2] réussie.\n";
-		} else {
-			print "Account [$name][id: $id2] password successfully changed.\n";
-		}
-	}
-	return 130;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: modification of an account e-mail
-sub changeemail() {
-	my($userid, $email) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple> email testname nouveauemail\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example> email testname newemail\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-	if (length($email) < 3) {
-		if ($defaultlanguage eq "F") {
-			print "Email trop courte [$email]. Entrez une e-mail valide svp.\n";
-		} else {
-			print "Email is too short [$email]. Please input a valid e-mail.\n";
-		}
-		return 109;
-	}
-	if (length($email) > 39) {
-		if ($defaultlanguage eq "F") {
-			print "Email trop longue [$email]. Entrez une e-mail de 39 caractères maximum svp.\n";
-		} else {
-			print "Email is too long [$email]. Please input an e-mail with 39 bytes at the most.\n";
-		}
-		return 109;
-	}
-	if (verify_email($email) == 0) {
-		if ($defaultlanguage eq "F") {
-			print "Email incorrect [$email]. Entrez une e-mail valide svp.\n";
-		} else {
-			print "Invalid email [$email]. Please input a valid e-mail.\n";
-		}
-		return 109;
-	}
-	print $so pack("va24a40", 0x7940, $userid, $email);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7941) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 162;
-	}
-	$buf = readso(28);
-	my($id2, $name) = unpack("Va24", $buf);
-	while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
-		chop($name);
-	};
-	if ($id2 == -1 || $id2 == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Echec de la modification de l'e-mail du compte [$userid].\n";
-			print "Le compte [$userid] n'existe pas.\n";
-		} else {
-			print "Account [$userid] e-mail changing failed.\n";
-			print "Account [$userid] doesn't exist.\n";
-		}
-		return 133;
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Modification de l'e-mail du compte [$name][id: $id2] réussie.\n";
-		} else {
-			print "Account [$name][id: $id2] e-mail successfully changed.\n";
-		}
-	}
-	return 160;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: search of accounts
-sub searchaccount() {
-	my($p1, $p2) = @_;
-	my($exp) = ("");
-	if ($p1 eq "-e" || $p1 eq "-r" || $p1 eq "--regex" || $p1 eq "--expr") {
-		if ($p2 eq "") {
-			if ($defaultlanguage eq "F") {
-				print "Entrez une expression régulière ou utilisez 'ls' pour avoir tous les comptes.\n";
-			} else {
-				print "Input a regular expression or use 'ls' to obtain all accounts.\n";
-			}
-			return 141;
-		}
-		$exp = $p2;
-	} else {
-		if ($p1 eq "") {
-			if ($defaultlanguage eq "F") {
-				print "Entrez une chaîne ou utilisez 'ls' pour avoir tous les comptes.\n";
-			} else {
-				print "Input a string or use 'ls' to obtain all accounts.\n";
-			}
-			return 141;
-		}
-		my($c) = 0;
-		$exp = lc($p1);
-		$exp =~ s/([\@])/\\$1/g;
-		$c += $exp =~ s/([\-\[\]])/\\$1/g;
-		$c += $exp =~ s/([\*\?])/.$1/g;
-		$c += $exp =~ s/\\\[(.)\\\-(.)\\\]/[$1-$2]/g;
-		$exp = "^$exp\$" if $c;
-	}
-	if (eval{ "" =~ /$exp/; }, $@) {
-		if ($defaultlanguage eq "F") {
-			print "Expression régulière non reconnue.\n";
-		} else {
-			print "Regular-Expression compiling failed.\n";
-		}
-		return 141;
-	}
-	my($i);
-	my($n, $st) = (0, 0);
-	#      0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567
-	if ($defaultlanguage eq "F") {
-		print " id_compte GM nom_utilisateur         sexe   count statut\n";
-	} else {
-		print "account_id GM user_name               sex    count state\n";
-	}
-	print "-------------------------------------------------------------------------------\n";
-	while(1) {
-		print $so pack("vV2", 0x7920, $st, 0);
-		$so->flush();
-		$buf = readso(4);
-		if (unpack("v", $buf) != 0x7921) {
-			if ($defaultlanguage eq "F") {
-				print "Problème de connexion au serveur (réponse incorrecte).\n";
-			} else {
-				print "Connection error to the server (incorrect answer).\n";
-			}
-			exit(10);
-		}
-		my($len) = unpack("x2v", $buf);
-		last if ($len <= 4);
-		for($i = 4; $i < $len; $i += 38) {
-			my(@dat) = unpack("VCa24cVV", readso(38));
-			$st = $dat[0] + 1;
-			next if (lc($dat[2]) !~ /$exp/);
-			printf "%10d %2s %-24s%-5s %6d %-27s\n", $dat[0],
-			        ($dat[1] == 0 ? "  " : $dat[1]),
-			        $dat[2],
-			        ($defaultlanguage eq "F" ? ("Femme","Male","Servr")[$dat[3]] : ("Femal","Male","Servr")[$dat[3]]),
-			        $dat[4],
-			        (($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"),
-			         "Unregistered ID",
-			         "Incorrect Password",
-			         "This ID is expired",
-			         "Rejected from Server",
-			         "Blocked by the GM Team", # You have been blocked by the GM Team
-			         "Your EXE file is too old", # Your Game's EXE file is not the latest version
-			         "Banishement or\n                                                   Prohibited to login until %s", # You are Prohibited to log in until %s
-			         "Server is over populated", # Server is jammed due to over populated
-			         "No MSG",
-			         "This ID is totally erased")[$dat[5] == 100 ? 10 : $dat[5]]; # This ID has been totally erased
-			$n++;
-		}
-	}
-	if ($defaultlanguage eq "F") {
-		if ($n == 0) {
-			print "Aucun compte trouvé.\n";
-		} elsif ($n == 1) {
-			print "1 compte trouvé.\n";
-		} else {
-			print "$n comptes trouvés.\n";
-		}
-	} else {
-		if ($n == 0) {
-			print "No account found.\n";
-		} elsif ($n == 1) {
-			print "1 account found.\n";
-		} else {
-			print "$n accounts found.\n";
-		}
-	}
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: modify the sex of an account
-sub changesex() {
-	my($userid, $sex) = @_;
-	if ($userid eq "" || !defined($userid)) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple> sex nomtest Male\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example> sex testname Male\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-#	if ($userid =~ /[^A-Za-z0-9\@-_]/) {
-#		if ($defaultlanguage eq "F") {
-#			print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n";
-#		} else {
-#			print "Illegal character found in the account name ".$`."[${&}]${'}\n";
-#		}
-#		return 101;
-#	}
-	$sex = uc(substr($sex, 0, 1));
-	if ($sex !~ /^[MF]$/) {
-		if ($defaultlanguage eq "F") {
-			print "Sexe incorrect [$sex]. Entrez M ou F svp.\n";
-		} else {
-			print "Illegal gender [$sex]. Please input M or F.\n";
-		}
-		return 103;
-	}
-	print $so pack("va24a1", 0x793c, $userid, $sex);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x793d) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 152;
-	}
-	$buf = readso(28);
-	my($id2, $name) = unpack("Va24", $buf);
-	while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
-		chop($name);
-	};
-	if ($id2 == -1 || $id2 == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Echec du changement du sexe du compte [$userid].\n";
-			print "Le compte n'existe pas ou le sexe est déjà celui demandé.\n";
-		} else {
-			print "Account [$userid] sex changing failed.\n";
-			print "Account doesn't exist or the sex is already the good sex.\n";
-		}
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Sexe du compte [$name][id: $id2] changé avec succès.\n";
-		} else {
-			print "Account [$name][id: $id2] sex successfully changed.\n";
-		}
-	}
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: modify the GM level of an account
-sub changegmlevel() {
-	my($userid, $gm_level) = @_;
-	if ($userid eq "" || !defined($userid)) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple> gm nomtest 80\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example> gm testname 80\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-#	if ($userid =~ /[^A-Za-z0-9\@-_]/) {
-#		if ($defaultlanguage eq "F") {
-#			print "Caractère interdit trouvé dans le nom du compte ".$`."[${&}]${'}\n";
-#		} else {
-#			print "Illegal character found in the account name ".$`."[${&}]${'}\n";
-#		}
-#		return 101;
-#	}
-	$gm_level = int($gm_level);
-	if ($gm_level < 0 || $gm_level > 99) {
-		if ($defaultlanguage eq "F") {
-			print "Niveau de GM incorrect [$gm_level]. Entrez une valeur de 0 à 99 svp.\n";
-		} else {
-			print "Illegal GM level [$gm_level]. Please input a value from 0 to 99.\n";
-		}
-		return 103;
-	}
-	print $so pack("va24C", 0x793e, $userid, $gm_level);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x793f) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 152;
-	}
-	$buf = readso(28);
-	my($id2, $name) = unpack("Va24", $buf);
-	while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
-		chop($name);
-	};
-	if ($id2 == -1 || $id2 == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Echec du changement du niveau de GM du compte [$userid].\n";
-			print "Le compte n'existe pas, le niveau de GM est déjà celui demandé,\n";
-			print "ou il est impossible de modifier le fichier des comptes GM.\n";
-		} else {
-			print "Account [$userid] GM level changing failed.\n";
-			print "Account doesn't exist, the GM level is already the good GM level,\n";
-			print "or it's impossible to modify the GM accounts file.\n";
-		}
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Niveau de GM du compte [$name][id: $id2] changé avec succès.\n";
-		} else {
-			print "Account [$name][id: $id2] GM level successfully changed.\n";
-		}
-	}
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Modification of a state
-sub changestate {
-	my($userid, $s, $error_message) = @_;
-	# Valid values: 0: ok, or value of the 0x006a packet + 1
-	if ($s eq "" || (($s < 0 || $s > 9) && $s != 100)) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez une des valeurs suivantes svp:\n";
-			print "  0 = Compte ok             6 = Your Game's EXE file is not the latest version\n";
-		} else {
-			print "Please input one of these values:\n";
-			print "  0 = Account ok            6 = Your Game's EXE file is not the latest version\n";
-		}
-		print "  1 = Unregistered ID       7 = You are Prohibited to log in until %s\n";
-		print "  2 = Incorrect Password    8 = Server is jammed due to over populated\n";
-		print "  3 = This ID is expired    9 = No MSG\n";
-		print "  4 = Rejected from Server  100 = This ID has been totally erased\n";
-		print "  5 = You have been blocked by the GM Team\n";
-		if ($defaultlanguage eq "F") {
-			print "<exemples> state nomtest 5\n";
-			print "           state nomtest 7 fin de votre ban\n";
-			print "           block <nom du compte>\n";
-			print "           unblock <nom du compte>\n";
-		} else {
-			print "<examples> state testname 5\n";
-			print "           state testname 7 end of your ban\n";
-			print "           block <account name>\n";
-			print "           unblock <account name>\n";
-		}
-		return 151;
-	}
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemples> state nomtest 5\n";
-			print "           state nomtest 7 fin de votre ban\n";
-			print "           block <nom du compte>\n";
-			print "           unblock <nom du compte>\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<examples> state testname 5\n";
-			print "           state testname 7 end of your ban\n";
-			print "           block <account name>\n";
-			print "           unblock <account name>\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-	if ($s != 7) {
-		$error_message = "-";
-	} else {
-		if (length($error_message) < 1) {
-			if ($defaultlanguage eq "F") {
-				print "Message d'erreur trop court. Entrez un message de 1-19 caractères.\n";
-			} else {
-				print "Error message is too short. Please input a message of 1-19 bytes.\n";
-			}
-			return 102;
-		}
-		if (length($error_message) > 19) {
-			if ($defaultlanguage eq "F") {
-				print "Message d'erreur trop long. Entrez un message de 1-19 caractères.\n";
-			} else {
-				print "Error message is too long. Please input a message of 1-19 bytes.\n";
-			}
-			return 102;
-		}
-	}
-	print $so pack("va24Va20", 0x7936, $userid, $s, $error_message);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7937) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 152;
-	}
-	$buf = readso(32);
-	my(@dat) = unpack("Va24V", $buf);
-	while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) {
-		chop($dat[1]);
-	};
-	if ($dat[0] != -1 && $dat[0] != 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Statut du compte [$dat[1]][id: $dat[0]] changé avec succès en [";
-		} else {
-			print "Account [$dat[1]][id: $dat[0]] state successfully changed in [";
-		}
-		print ((($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"),
-		  "Unregistered ID",
-		  "Incorrect Password",
-		  "This ID is expired",
-		  "Rejected from Server",
-		  "You have been blocked by the GM Team",
-		  "Your Game's EXE file is not the latest version",
-		  "You are Prohibited to log in until %s",
-		  "Server is jammed due to over populated",
-		  "No MSG",
-		  "This ID has been totally erased")[$dat[2] == 100 ? 10 : $dat[2]]);
-		print "].\n";
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Echec du changement du statut du compte [$userid]. Le compte n'existe pas.\n";
-		} else {
-			print "Account [$userid] state changing failed. Account doesn't exist.\n";
-		}
-	}
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Displaying of the number of online players
-sub getlogincount {
-	# Request to the login-server
-	print $so pack("v", 0x7938);
-	$so->flush();
-
-	$buf = readso(4);
-	# Connection failed
-	if (unpack("v", $buf) != 0x7939) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		exit(3);
-	}
-
-	# Get length of the received packet
-	my($len) = unpack("x2v", $buf) - 4;
-
-	# Read information of the servers
-	if ($len < 1) {
-		if ($defaultlanguage eq "F") {
-			printf "  Aucun serveur n'est connecté au login serveur.\n";
-		} else {
-			printf "  No server is connected to the login-server.\n";
-		}
-	} else {
-		my(@slist) = ();
-		for(; $len > 0; $len -= 32) {
-			my($name, $count) = unpack("x6 a20 V", readso(32));
-			$name = substr($name, 0, index($name, "\0"));
-			push @slist, [ $name, $count ];
-		}
-		# Displaying of result
-		my($i);
-		if ($defaultlanguage eq "F") {
-			printf "  Nombre de joueurs en ligne (serveur: nb):\n";
-		} else {
-			printf "  Number of online players (server: number).\n";
-		}
-		foreach $i(@slist) {
-			printf "    %-20s : %5d\n", $i->[0], $i->[1];
-		}
-	}
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Modification of a memo field
-sub changememo {
-	my($userid, $memo) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple> memo nomtest nouveau memo\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example> memo testname new memo\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-	if (length($memo) > 254) {
-		if ($defaultlanguage eq "F") {
-			print "Mémo trop long (".length($memo)." caractères).\n";
-			print "Entrez un mémo de 254 caractères maximum svp.\n";
-		} else {
-			print "Memo is too long (".length($memo)." characters).\n";
-			print "Please input a memo of 254 bytes at the maximum.\n";
-		}
-		return 102;
-	}
-	if (length($memo) == 0) {
-		print $so pack("va24v", 0x7942, $userid, 0);
-	} else {
-		print $so pack("va24va".length($memo), 0x7942, $userid, length($memo), $memo);
-	}
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7943) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 152;
-	}
-	$buf = readso(28);
-	my($id2, $name) = unpack("Va24", $buf);
-	while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
-		chop($name);
-	};
-	if ($id2 == -1 || $id2 == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Echec du changement du mémo du compte [$userid]. Le compte n'existe pas.\n";
-		} else {
-			print "Account [$userid] memo changing failed. Account doesn't exist.\n";
-		}
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Mémo du compte [$name][id: $id2] changé avec succès.\n";
-		} else {
-			print "Account [$name][id: $id2] memo successfully changed.\n";
-		}
-	}
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Request to obtain an account id
-sub idaccount() {
-	my($userid) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple> id nomtest\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example> id testname\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-	print $so pack("va24", 0x7944, $userid);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7945) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 122;
-	}
-	$buf = readso(28);
-	my($id2, $name) = unpack("Va24", $buf);
-	while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
-		chop($name);
-	};
-	if ($id2 == -1 || $id2 == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Impossible de trouver l'id du compte [$userid]. Le compte n'existe pas.\n";
-		} else {
-			print "Unabled to find the account [$userid] id. Account doesn't exist.\n";
-		}
-		return 123;
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Le compte [$name] a pour id: $id2.\n";
-		} else {
-			print "The account [$name] have the id: $id2.\n";
-		}
-	}
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Request to obtain an account name
-sub nameaccount() {
-	my($id) = @_;
-	if ($id < 0) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un id ayant une valeur positive svp.\n";
-		} else {
-			print "Please input a positive value for the id.\n";
-		}
-		return 136;
-	}
-	print $so pack("vV", 0x7946, $id);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7947) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 122;
-	}
-	$buf = readso(28);
-	my($id2, $name) = unpack("Va24", $buf);
-	while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
-		chop($name);
-	};
-	if (length($name) == 0 || $name eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Impossible de trouver le nom du compte [id: $id2]. Le compte n'existe pas.\n";
-		} else {
-			print "Unabled to find the account [id: $id2] name. Account doesn't exist.\n";
-		}
-		return 123;
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Le compte [id: $id2] a pour nom: $name.\n";
-		} else {
-			print "The account [id: $id2] have the name: $name.\n";
-		}
-	}
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Set a validity limit of an account
-sub timesetaccount() {
-	my($userid, $date, $time) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple>: timeset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n";
-			print "           timeset <nom_du_compte> 0    (0 = illimité)\n";
-			printf "          Heure par défaut [hh:mm:ss]: 23:59:59\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example>: timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n";
-			print "           timeset <account_name> 0   (0 = unlimited)\n";
-			printf "          Default time [hh:mm:ss]: 23:59:59\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-	my($year, $month, $day) = split(/[.\-\/]/, $date);
-	my($hour, $minute, $second) = split(/:/, $time);
-	if ($time eq "") {
-		$hour = 23;
-		$minute = 59;
-		$second = 59;
-	}
-	my($timestamp);
-	if ($year eq "" ||
-	    ($year != 0 && ($month eq "" || $day eq "" || $hour eq "" || $minute eq "" || $second eq ""))) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n";
-		} else {
-			print "Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n";
-		}
-		return 102;
-	}
-	if ($year == 0) {
-		$timestamp = 0;
-	} else {
-		if ($year < 70) {
-			$year = $year + 100;
-		}
-		if ($year >= 1900) {
-			$year = $year - 1900;
-		}
-		if ($month < 1 || $month > 12) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez un mois correct svp (entre 1 et 12).\n";
-			} else {
-				print "Please give a correct value for the month (from 1 to 12).\n";
-			}
-			return 102;
-		}
-		$month = $month - 1;
-		if ($day < 1 || $day > 31) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez un jour correct svp (entre 1 et 31).\n";
-			} else {
-				print "Please give a correct value for the day (from 1 to 31).\n";
-			}
-			return 102;
-		}
-		if ((($month == 3 || $month == 5 || $month == 8 || $month == 10) && $day > 30) ||
-		    ($month == 1 && $day > 29)) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez un jour correct en fonction du mois svp.\n";
-			} else {
-				print "Please give a correct value for a day of this month.\n";
-			}
-			return 102;
-		}
-		if ($hour < 0 || $hour > 23) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez une heure correcte svp (entre 0 et 23).\n";
-			} else {
-				print "Please give a correct value for the hour (from 0 to 23).\n";
-			}
-			return 102;
-		}
-		if ($minute < 0 || $minute > 59) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez des minutes correctes svp (entre 0 et 59).\n";
-			} else {
-				print "Please give a correct value for the minutes (from 0 to 59).\n";
-			}
-			return 102;
-		}
-		if ($second < 0 || $second > 59) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez des secondes correctes svp (entre 0 et 59).\n";
-			} else {
-				print "Please give a correct value for the seconds (from 0 to 59).\n";
-			}
-			return 102;
-		}
-		$timestamp = POSIX::mktime($second, $minute, $hour, $day, $month, $year, 0, 0, -1); # -1: no winter/summer time modification
-		if ($timestamp == undef) {
-			if ($defaultlanguage eq "F") {
-				print "Date incorrecte.\n";
-				print "Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n";
-			} else {
-				print "Invalid date.\n";
-				print "Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n";
-			}
-			return 102;
-		}
-	}
-
-	print $so pack("va24V", 0x7948, $userid, $timestamp);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7949) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 152;
-	}
-	$buf = readso(32);
-	my(@dat) = unpack("Va24V", $buf);
-	while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) {
-		chop($dat[1]);
-	};
-	if ($dat[0] != -1 && $dat[0] != 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Limite de validité du compte [$dat[1]][id: $dat[0]] changée avec succès ".
-			($dat[2] == 0 ? "en [illimité].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2])));
-		} else {
-			print "Validity Limit of the account [$dat[1]][id: $dat[0]] successfully changed ".
-			($dat[2] == 0 ? "to [unlimited].\n" : "to be until ".(POSIX::ctime($dat[2])));
-		}
-		# localtime($dat[2]) is also possible to display instead of POSIX::ctime.
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Echec du changement de la validité du compte [$userid]. Le compte n'existe pas.\n";
-		} else {
-			print "Account [$userid] validity limit changing failed. Account doesn't exist.\n";
-		}
-	}
-
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Add/substract time to the validity limit of an account
-sub timeaddaccount() {
-	my($userid, $modif) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "  <exemple> timeadd nomtest +1m-2mn1s-6y\n";
-			print "            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n";
-			print "            et 6 ans dans le même temps.\n";
-		} else {
-			print "Please input an account name.\n";
-			print "  <example> timeadd testname +1m-2mn1s-6y\n";
-			print "            this example adds 1 month and 1 second, and substracts 2 minutes\n";
-			print "            and 6 years at the same time.\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-	my($year, $month, $day) = (0, 0 ,0);
-	my($hour, $minute, $second) = (0, 0 ,0);
-
-	$modif = lc($modif);
-	while (length($modif) > 0) {
-		my($value) = int($modif);
-		if ($value == 0) {
-			$modif = substr($modif, 1);
-		} else {
-			if (substr($modif, 0, 1) =~ /[\-\+]/) {
-				$modif = substr($modif, 1);
-			}
-			while (length($modif) > 0 && substr($modif, 0, 1) =~ /[0-9]/) {
-				$modif = substr($modif, 1);
-			}
-			if (index($modif, "s") == 0) {
-				$second = $value;
-				$modif = substr($modif, 1);
-			} elsif (index($modif, "mn") == 0) {
-				$minute = $value;
-				$modif = substr($modif, 2);
-			} elsif (index($modif, "h") == 0) {
-				$hour = $value;
-				$modif = substr($modif, 1);
-			} elsif (index($modif, "d") == 0 || index($modif, "j") == 0) {
-				$day = $value;
-				$modif = substr($modif, 1);
-			} elsif (index($modif, "m") == 0) {
-				$month = $value;
-				$modif = substr($modif, 1);
-			} elsif (index($modif, "y") == 0 || index($modif, "a") == 0) {
-				$year = $value;
-				$modif = substr($modif, 1);
-			} else {
-				$modif = substr($modif, 1);
-			}
-		}
-	}
-
-	if ($defaultlanguage eq "F") {
-		print " année:   $year\n";
-		print " mois:    $month\n";
-		print " jour:    $day\n";
-		print " heure:   $hour\n";
-		print " minute:  $minute\n";
-		print " seconde: $second\n";
-	} else {
-		print " year:   $year\n";
-		print " month:  $month\n";
-		print " day:    $day\n";
-		print " hour:   $hour\n";
-		print " minute: $minute\n";
-		print " second: $second\n";
-	}
-
-	if ($year == 0 && $month == 0 && $day == 0 && $hour == 0 && $minute == 0 && $second == 0) {
-		if ($defaultlanguage eq "F") {
-			print "Vous devez entrer un ajustement avec cette commande, svp:\n";
-			print "  Valeur d'ajustement (-1, 1, +1, etc...)\n";
-			print "  Element modifié:\n";
-			print "    a ou y: année\n";
-			print "    m:      mois\n";
-			print "    j ou d: jour\n";
-			print "    h:      heure\n";
-			print "    mn:     minute\n";
-			print "    s:      seconde\n";
-			print "  <exemple> timeadd nomtest +1m-2mn1s-6y\n";
-			print "            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n";
-			print "            et 6 ans dans le même temps.\n";
-		} else {
-			print "Please give an adjustment with this command:\n";
-			print "  Adjustment value (-1, 1, +1, etc...)\n";
-			print "  Modified element:\n";
-			print "    a or y: year\n";
-			print "    m:      month\n";
-			print "    j or d: day\n";
-			print "    h:       hour\n";
-			print "    mn:      minute\n";
-			print "    s:       second\n";
-			print "  <example> timeadd testname +1m-2mn1s-6y\n";
-			print "            this example adds 1 month and 1 second, and substracts 2 minutes\n";
-			print "            and 6 years at the same time.\n";
-		}
-		return 137;
-	}
-	if ($year > 127 || $year < -127) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement d'années correct (de -127 à 127), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the years (from -127 to 127).\n";
-		}
-		return 137;
-	}
-	if ($month > 255 || $month < -255) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement de mois correct (de -255 à 255), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the months (from -255 to 255).\n";
-		}
-		return 137;
-	}
-	if ($day > 32767 || $day < -32767) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the days (from -32767 to 32767).\n";
-		}
-		return 137;
-	}
-	if ($hour > 32767 || $hour < -32767) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the hours (from -32767 to 32767).\n";
-		}
-		return 137;
-	}
-	if ($minute > 32767 || $minute < -32767) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the minutes (from -32767 to 32767).\n";
-		}
-		return 137;
-	}
-	if ($second > 32767 || $second < -32767) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the seconds (from -32767 to 32767).\n";
-		}
-		return 137;
-	}
-
-	print $so pack("va24vvvvvv", 0x7950, $userid, $year, $month, $day, $hour, $minute, $second);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7951) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 152;
-	}
-	$buf = readso(32);
-	my(@dat) = unpack("Va24V", $buf);
-	while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) {
-		chop($dat[1]);
-	};
-	if ($dat[0] == -1 || $dat[0] == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Echec du changement de la validité du compte [$userid]. Le compte n'existe pas.\n";
-		} else {
-			print "Account [$userid] validity limit changing failed. Account doesn't exist.\n";
-		}
-	} elsif ($dat[2] == 0) {
-		if ($defaultlanguage eq "F") {
-			print "Limite de validité du compte [$dat[1]][id: $dat[0]] inchangée.\n";
-			print "Le compte a une validité illimitée ou\n";
-			print "la modification est impossible avec les ajustements demandés.\n";
-		} else {
-			print "Validity limit of the account [$dat[1]][id: $dat[0]] unchanged.\n";
-			print "The account have an unlimited validity limit or\n";
-			print "the changing is impossible with the proposed adjustments.\n";
-		}
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Limite de validité du compte [$dat[1]][id: $dat[0]] changée avec succès ".
-			($dat[2] == 0 ? "en [illimité].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2])));
-		} else {
-			print "Validity limit of the account [$dat[1]][id: $dat[0]] successfully changed ".
-			($dat[2] == 0 ? "to [unlimited].\n" : "to be until ".(POSIX::ctime($dat[2])));
-		}
-		# localtime($dat[2]) is also possible to display instead of POSIX::ctime.
-	}
-
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Set the final date of a banishment of an account
-sub bansetaccount() {
-	my($userid, $date, $time) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n";
-			print "           banset <nom_du_compte> 0    (0 = dé-bani)\n";
-			print "           ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n";
-			print "           unban/unbanish <nom du compte>\n";
-			printf "          Heure par défaut [hh:mm:ss]: 23:59:59\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n";
-			print "           banset <account_name> 0   (0 = un-banished)\n";
-			print "           ban/banish yyyy/mm/dd hh:mm:ss <account name>\n";
-			print "           unban/unbanish <account name>\n";
-			printf "          Default time [hh:mm:ss]: 23:59:59\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-	my($year, $month, $day) = split(/[.\-\/]/, $date);
-	my($hour, $minute, $second) = split(/:/, $time);
-	if ($time eq "") {
-		$hour = 23;
-		$minute = 59;
-		$second = 59;
-	}
-	my($timestamp);
-	if ($year eq "" ||
-	    ($year != 0 && ($month eq "" || $day eq "" || $hour eq "" || $minute eq "" || $second eq ""))) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n";
-		} else {
-			print "Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n";
-		}
-		return 102;
-	}
-	if ($year == 0) {
-		$timestamp = 0;
-	} else {
-		if ($year < 70) {
-			$year = $year + 100;
-		}
-		if ($year >= 1900) {
-			$year = $year - 1900;
-		}
-		if ($month < 1 || $month > 12) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez un mois correct svp (entre 1 et 12).\n";
-			} else {
-				print "Please give a correct value for the month (from 1 to 12).\n";
-			}
-			return 102;
-		}
-		$month = $month - 1;
-		if ($day < 1 || $day > 31) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez un jour correct svp (entre 1 et 31).\n";
-			} else {
-				print "Please give a correct value for the day (from 1 to 31).\n";
-			}
-			return 102;
-		}
-		if ((($month == 3 || $month == 5 || $month == 8 || $month == 10) && $day > 30) ||
-		    ($month == 1 && $day > 29)) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez un jour correct en fonction du mois svp.\n";
-			} else {
-				print "Please give a correct value for a day of this month.\n";
-			}
-			return 102;
-		}
-		if ($hour < 0 || $hour > 23) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez une heure correcte svp (entre 0 et 23).\n";
-			} else {
-				print "Please give a correct value for the hour (from 0 to 23).\n";
-			}
-			return 102;
-		}
-		if ($minute < 0 || $minute > 59) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez des minutes correctes svp (entre 0 et 59).\n";
-			} else {
-				print "Please give a correct value for the minutes (from 0 to 59).\n";
-			}
-			return 102;
-		}
-		if ($second < 0 || $second > 59) {
-			if ($defaultlanguage eq "F") {
-				print "Entrez des secondes correctes svp (entre 0 et 59).\n";
-			} else {
-				print "Please give a correct value for the seconds (from 0 to 59).\n";
-			}
-			return 102;
-		}
-		$timestamp = POSIX::mktime($second, $minute, $hour, $day, $month, $year, 0, 0, -1); # -1: no winter/summer time modification
-		if ($timestamp == undef) {
-			if ($defaultlanguage eq "F") {
-				print "Date incorrecte.\n";
-				print "Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n";
-			} else {
-				print "Invalid date.\n";
-				print "Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n";
-			}
-			return 102;
-		}
-	}
-
-	print $so pack("va24V", 0x794a, $userid, $timestamp);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x794b) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 152;
-	}
-	$buf = readso(32);
-	my(@dat) = unpack("Va24V", $buf);
-	while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) {
-		chop($dat[1]);
-	};
-	if ($dat[0] != -1 && $dat[0] != 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Date finale de banissement du compte [$dat[1]][id: $dat[0]] changée avec succès ".
-			($dat[2] == 0 ? "en [dé-bannie].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2])));
-		} else {
-			print "Final date of banishment of the account [$dat[1]][id: $dat[0]] successfully changed ".
-			($dat[2] == 0 ? "to [unbanished].\n" : "to be until ".(POSIX::ctime($dat[2])));
-		}
-		# localtime($dat[2]) is also possible to display instead of POSIX::ctime.
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Echec du changement de la date finale de banissement du compte [$userid]. Le compte n'existe pas.\n";
-		} else {
-			print "Account [$userid] final date of banishment changing failed. Account doesn't exist.\n";
-		}
-	}
-
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Add/substract time to the final date of a banishment of an account
-sub banaddaccount() {
-	my($userid, $modif) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "  <exemple> banadd nomtest +1m-2mn1s-6y\n";
-			print "            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n";
-			print "            et 6 ans dans le même temps.\n";
-		} else {
-			print "Please input an account name.\n";
-			print "  <example> banadd testname +1m-2mn1s-6y\n";
-			print "            this example adds 1 month and 1 second, and substracts 2 minutes\n";
-			print "            and 6 years at the same time.\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-	my($year, $month, $day) = (0, 0 ,0);
-	my($hour, $minute, $second) = (0, 0 ,0);
-
-	$modif = lc($modif);
-	while (length($modif) > 0) {
-		my($value) = int($modif);
-		if ($value == 0) {
-			$modif = substr($modif, 1);
-		} else {
-			if (substr($modif, 0, 1) =~ /[\-\+]/) {
-				$modif = substr($modif, 1);
-			}
-			while (length($modif) > 0 && substr($modif, 0, 1) =~ /[0-9]/) {
-				$modif = substr($modif, 1);
-			}
-			if (index($modif, "s") == 0) {
-				$second = $value;
-				$modif = substr($modif, 1);
-			} elsif (index($modif, "mn") == 0) {
-				$minute = $value;
-				$modif = substr($modif, 2);
-			} elsif (index($modif, "h") == 0) {
-				$hour = $value;
-				$modif = substr($modif, 1);
-			} elsif (index($modif, "d") == 0 || index($modif, "j") == 0) {
-				$day = $value;
-				$modif = substr($modif, 1);
-			} elsif (index($modif, "m") == 0) {
-				$month = $value;
-				$modif = substr($modif, 1);
-			} elsif (index($modif, "y") == 0 || index($modif, "a") == 0) {
-				$year = $value;
-				$modif = substr($modif, 1);
-			} else {
-				$modif = substr($modif, 1);
-			}
-		}
-	}
-
-	if ($defaultlanguage eq "F") {
-		print " année:   $year\n";
-		print " mois:    $month\n";
-		print " jour:    $day\n";
-		print " heure:   $hour\n";
-		print " minute:  $minute\n";
-		print " seconde: $second\n";
-	} else {
-		print " year:   $year\n";
-		print " month:  $month\n";
-		print " day:    $day\n";
-		print " hour:   $hour\n";
-		print " minute: $minute\n";
-		print " second: $second\n";
-	}
-
-	if ($year == 0 && $month == 0 && $day == 0 && $hour == 0 && $minute == 0 && $second == 0) {
-		if ($defaultlanguage eq "F") {
-			print "Vous devez entrer un ajustement avec cette commande, svp:\n";
-			print "  Valeur d'ajustement (-1, 1, +1, etc...)\n";
-			print "  Element modifié:\n";
-			print "    a ou y: année\n";
-			print "    m:      mois\n";
-			print "    j ou d: jour\n";
-			print "    h:      heure\n";
-			print "    mn:     minute\n";
-			print "    s:      seconde\n";
-			print "  <exemple> banadd nomtest +1m-2mn1s-6y\n";
-			print "            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n";
-			print "            et 6 ans dans le même temps.\n";
-		} else {
-			print "Please give an adjustment with this command:\n";
-			print "  Adjustment value (-1, 1, +1, etc...)\n";
-			print "  Modified element:\n";
-			print "    a or y: year\n";
-			print "    m: month\n";
-			print "    j or d: day\n";
-			print "    h: hour\n";
-			print "    mn: minute\n";
-			print "    s: second\n";
-			print "  <example> banadd testname +1m-2mn1s-6y\n";
-			print "            this example adds 1 month and 1 second, and substracts 2 minutes\n";
-			print "            and 6 years at the same time.\n";
-		}
-		return 137;
-	}
-	if ($year > 127 || $year < -127) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement d'années correct (de -127 à 127), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the years (from -127 to 127).\n";
-		}
-		return 137;
-	}
-	if ($month > 255 || $month < -255) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement de mois correct (de -255 à 255), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the months (from -255 to 255).\n";
-		}
-		return 137;
-	}
-	if ($day > 32767 || $day < -32767) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the days (from -32767 to 32767).\n";
-		}
-		return 137;
-	}
-	if ($hour > 32767 || $hour < -32767) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the hours (from -32767 to 32767).\n";
-		}
-		return 137;
-	}
-	if ($minute > 32767 || $minute < -32767) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the minutes (from -32767 to 32767).\n";
-		}
-		return 137;
-	}
-	if ($second > 32767 || $second < -32767) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n";
-		} else {
-			print "Please give a correct adjustment for the seconds (from -32767 to 32767).\n";
-		}
-		return 137;
-	}
-
-	print $so pack("va24vvvvvv", 0x794c, $userid, $year, $month, $day, $hour, $minute, $second);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x794d) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 152;
-	}
-	$buf = readso(32);
-	my(@dat) = unpack("Va24V", $buf);
-	while (length($dat[1]) > 0 && substr($dat[1], length($dat[1])-1, 1) eq chr(0)) {
-		chop($dat[1]);
-	};
-	if ($dat[0] == -1 || $dat[0] == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Echec du changement de la date finale de banissement du compte [$userid]. Le compte n'existe pas.\n";
-		} else {
-			print "Account [$userid] final date of banishment changing failed. Account doesn't exist.\n";
-		}
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Date finale de banissement du compte [$dat[1]][id: $dat[0]] changée avec succès ".
-			($dat[2] == 0 ? "en [dé-bannie].\n" : "pour être jusqu'au ".(POSIX::ctime($dat[2])));
-		} else {
-			print "Final date of banishment of the account [$dat[1]][id: $dat[0]] successfully changed ".
-			($dat[2] == 0 ? "to [unbanished].\n" : "to be until ".(POSIX::ctime($dat[2])));
-		}
-		# localtime($dat[2]) is also possible to display instead of POSIX::ctime.
-	}
-
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Request to displaying information about an account (by its name)
-sub whoaccount() {
-	my($userid) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple> who nomtest\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example> who testname\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-
-	print $so pack("va24", 0x7952, $userid);
-	$so->flush();
-
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7953) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 122;
-	}
-	my($id2, $GM_level, $name, $sex, $count, $status, $error_message, $last_login, $last_ip, $email, $validite, $ban_date, $memo_size) = unpack("VCa24cVVa20a24a16a40VVv", readso(148));
-	my($memo) = "";
-	if ($memo_size > 0) {
-		$memo = unpack("a".$memo_size, readso($memo_size));
-	}
-	while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
-		chop($name);
-	};
-	while (length($error_message) > 0 && substr($error_message, length($error_message)-1, 1) eq chr(0)) {
-		chop($error_message);
-	};
-	while (length($last_login) > 0 && substr($last_login, length($last_login)-1, 1) eq chr(0)) {
-		chop($last_login);
-	};
-	while (length($last_ip) > 0 && substr($last_ip, length($last_ip)-1, 1) eq chr(0)) {
-		chop($last_ip);
-	};
-	while (length($email) > 0 && substr($email, length($email)-1, 1) eq chr(0)) {
-		chop($email);
-	};
-	while (length($memo) > 0 && substr($memo, length($memo)-1, 1) eq chr(0)) {
-		chop($memo);
-	};
-
-	if ($id2 == -1 || $id2 == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Impossible de trouver le compte [$userid]. Le compte n'existe pas.\n";
-		} else {
-			print "Unabled to find the account [$userid]. Account doesn't exist.\n";
-		}
-		return 123;
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Le compte [$userid] a les caractéristiques suivantes:\n";
-		} else {
-			print "The account [$userid] is set with:\n";
-		}
-		if ($GM_level == 0) {
-			print " Id:     $id2 (non-GM)\n";
-		} else {
-			if ($defaultlanguage eq "F") {
-				print " Id:     $id2 (GM niveau $GM_level)\n";
-			} else {
-				print " Id:     $id2 (GM level $GM_level)\n";
-			}
-		}
-		if ($defaultlanguage eq "F") {
-			print " Nom:    '$name'\n";
-			print " Sexe:   ".("Femme", "Male", "Serveur")[$sex]."\n";
-		} else {
-			print " Name:   '$name'\n";
-			print " Sex:    ".("Female", "Male", "Server")[$sex]."\n";
-		}
-		print " E-mail: $email\n";
-		if ($status == 7) {
-			print " Statut: 7 [You are Prohibited to log in until $error_message]\n";
-		} else {
-			print " Statut: $status [".(
-			      ($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"),
-			      "Unregistered ID",
-			      "Incorrect Password",
-			      "This ID is expired",
-			      "Rejected from Server",
-			      "You have been blocked by the GM Team",
-			      "Your Game's EXE file is not the latest version",
-			      "You are Prohibited to log in until %s",
-			      "Server is jammed due to over populated",
-			      "No MSG",
-			      "This ID is totally erased")[$status == 100 ? 10 : $status]."]\n";
-		}
-		if ($defaultlanguage eq "F") {
-			print " Banissement: ".($ban_date == 0 ? "non banni.\n" : "jusqu'au ".(POSIX::ctime($ban_date)));
-			print " Compteur: $count connexion".("s", "")[$count > 1 ? 0 : 1]."\n";
-			print " Dernière connexion le: $last_login (ip: $last_ip)\n";
-			print " Limite de validité: ".($validite == 0 ? "illimité.\n" : "jusqu'au ".(POSIX::ctime($validite)));
-		} else {
-			print " Banishment: ".($ban_date == 0 ? "not banished.\n" : "until ".(POSIX::ctime($ban_date)));
-			print " Count: $count connection".("s", "")[$count > 1 ? 0 : 1]."\n";
-			print " Last connection at: $last_login (ip: $last_ip)\n";
-			print " Validity limit: ".($validite == 0 ? "unlimited.\n" : "until ".(POSIX::ctime($validite)));
-		}
-		print " Memo:   '$memo'\n";
-	}
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Request to displaying information about an account (by its id)
-sub infoaccount() {
-	my($id) = @_;
-	if ($id < 0) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un id ayant une valeur positive svp.\n";
-		} else {
-			print "Please input a positive value for the id.\n";
-		}
-		return 136;
-	}
-
-	print $so pack("vV", 0x7954, $id);
-	$so->flush();
-
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x7953) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 122;
-	}
-	my($id2, $GM_level, $name, $sex, $count, $status, $error_message, $last_login, $last_ip, $email, $validite, $ban_date, $memo_size) = unpack("VCa24cVVa20a24a16a40VVv", readso(148));
-	my($memo) = "";
-	if ($memo_size > 0) {
-		$memo = unpack("a".$memo_size, readso($memo_size));
-	}
-	while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
-		chop($name);
-	};
-	while (length($error_message) > 0 && substr($error_message, length($error_message)-1, 1) eq chr(0)) {
-		chop($error_message);
-	};
-	while (length($last_login) > 0 && substr($last_login, length($last_login)-1, 1) eq chr(0)) {
-		chop($last_login);
-	};
-	while (length($last_ip) > 0 && substr($last_ip, length($last_ip)-1, 1) eq chr(0)) {
-		chop($last_ip);
-	};
-	while (length($email) > 0 && substr($email, length($email)-1, 1) eq chr(0)) {
-		chop($email);
-	};
-	while (length($memo) > 0 && substr($memo, length($memo)-1, 1) eq chr(0)) {
-		chop($memo);
-	};
-
-	if (length($name) == 0 || $name eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Impossible de trouver le nom du compte [id: $id2]. Le compte n'existe pas.\n";
-		} else {
-			print "Unabled to find the account [id: $id2] name. Account doesn't exist.\n";
-		}
-		return 123;
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Le compte [id: $id2] a les caractéristiques suivantes:\n";
-		} else {
-			print "The account [id: $id2] is set with:\n";
-		}
-		if ($GM_level == 0) {
-			print " Id:     $id2 (non-GM)\n";
-		} else {
-			if ($defaultlanguage eq "F") {
-				print " Id:     $id2 (GM niveau $GM_level)\n";
-			} else {
-				print " Id:     $id2 (GM level $GM_level)\n";
-			}
-		}
-		if ($defaultlanguage eq "F") {
-			print " Nom:    '$name'\n";
-			print " Sexe:   ".("Femme", "Male", "Serveur")[$sex]."\n";
-		} else {
-			print " Name:   '$name'\n";
-			print " Sex:    ".("Female", "Male", "Server")[$sex]."\n";
-		}
-		print " E-mail: $email\n";
-		if ($status == 7) {
-			print " Statut: 7 [You are Prohibited to log in until $error_message]\n";
-		} else {
-			print " Statut: $status [".(
-			      ($defaultlanguage eq "F" ? "Compte Ok" : "Account OK"),
-			      "Unregistered ID",
-			      "Incorrect Password",
-			      "This ID is expired",
-			      "Rejected from Server",
-			      "You have been blocked by the GM Team",
-			      "Your Game's EXE file is not the latest version",
-			      "You are Prohibited to log in until %s",
-			      "Server is jammed due to over populated",
-			      "No MSG",
-			      "This ID is totally erased")[$status == 100 ? 10 : $status]."]\n";
-		}
-		if ($defaultlanguage eq "F") {
-			print " Banissement: ".($ban_date == 0 ? "non banni.\n" : "jusqu'au ".(POSIX::ctime($ban_date)));
-			print " Compteur: $count connexion".("s", "")[$count > 1 ? 0 : 1]."\n";
-			print " Dernière connexion le: $last_login (ip: $last_ip)\n";
-			print " Limite de validité: ".($validite == 0 ? "illimité.\n" : "jusqu'au ".(POSIX::ctime($validite)));
-		} else {
-			print " Banishment: ".($ban_date == 0 ? "not banished.\n" : "until ".(POSIX::ctime($ban_date)));
-			print " Count: $count connection".("s", "")[$count > 1 ? 0 : 1]."\n";
-			print " Last connection at: $last_login (ip: $last_ip)\n";
-			print " Validity limit: ".($validite == 0 ? "unlimited.\n" : "until ".(POSIX::ctime($validite)));
-		}
-		print " Memo:   '$memo'\n";
-	}
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Check the validity of a password
-# (Note: never send back a password with login-server!! security of passwords)
-sub checkaccount() {
-	my($userid, $passwd) = @_;
-	if ($userid eq "") {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un nom de compte svp.\n";
-			print "<exemple> check testname motdepasse\n";
-		} else {
-			print "Please input an account name.\n";
-			print "<example> check testname password\n";
-		}
-		return 136;
-	}
-	if (verify_accountname($userid) == 0) {
-		return 102;
-	}
-	if ($passwd eq "") {
-		return 134 if (($passwd = typepasswd()) eq "");
-	}
-	if (verify_password($passwd) == 0) {
-		return 131;
-	}
-	print $so pack("va24a24", 0x793a, $userid,$passwd);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x793b) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 132;
-	}
-	$buf = readso(28);
-	my($id2, $name) = unpack("Va24", $buf);
-	while (length($name) > 0 && substr($name, length($name)-1, 1) eq chr(0)) {
-		chop($name);
-	};
-	if ($id2 == -1 || $id2 == 4294967295) {
-		if ($defaultlanguage eq "F") {
-			print "Le compte [$userid] n'existe pas ou le mot de passe est incorrect.\n";
-		} else {
-			print "The account [$userid] doesn't exist or the password is incorrect.\n";
-		}
-		return 133;
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Le mot de passe donné correspond bien au compte [$name][id: $id2].\n";
-		} else {
-			print "The proposed password is correct for the account [$name][id: $id2].\n";
-		}
-	}
-	return 130;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Request to login-server to reload GM configuration file
-sub reloadGM() {
-	print $so pack("v", 0x7955);
-	$so->flush();
-	if ($defaultlanguage eq "F") {
-		print "Demande de recharger le fichier de configuration des GM envoyée.\n";
-		print "Vérifiez les comptes GM actuels (après rechargement):\n";
-	} else {
-		print "Request to reload the GM configuration file sended.\n";
-		print "Check the actual GM accounts (after reloading):\n";
-	}
-	&listaccount(0, 0, 1); # 1: to list only GM
-	return 180;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Send a broadcast message
-sub sendbroadcast() {
-	my($type, $message) = @_;
-	if ($message eq "" || length($message) == 0) {
-		if ($defaultlanguage eq "F") {
-			print "Entrez un message svp.\n";
-			if ($type == 0) {
-				print "<exemple> kami un message\n";
-			} else {
-				print "<exemple> kamib un message\n";
-			}
-		} else {
-			print "Please input a message.\n";
-			if ($type == 0) {
-				print "<example> kami a message\n";
-			} else {
-				print "<example> kamib a message\n";
-			}
-		}
-		return 136;
-	}
-
-	print $so pack("vvVa".length($message), 0x794e, $type, length($message), $message);
-	$so->flush();
-	$buf = readso(2);
-	if (unpack("v", $buf) != 0x794f) {
-		if ($defaultlanguage eq "F") {
-			print "Problème de connexion au serveur (réponse incorrecte).\n";
-		} else {
-			print "Connection error to the server (incorrect answer).\n";
-		}
-		return 152;
-	}
-	$buf = readso(2);
-	my($answer) = unpack("v", $buf);
-	if ($answer == -1 || $answer == 65535) {
-		if ($defaultlanguage eq "F") {
-			print "Echec de l'envoi du message. Aucun server de char en ligne.\n";
-		} else {
-			print "Message sending failed. No online char-server.\n";
-		}
-	} else {
-		if ($defaultlanguage eq "F") {
-			print "Message transmis au server de logins avec succès.\n";
-		} else {
-			print "Message successfully sended to login-server.\n";
-		}
-	}
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Change language of displaying
-sub changelanguage() {
-	my($language) = @_;
-	if ($language eq "" || length($language) == 0) {
-		if ($defaultlanguage == 'F') {
-			printf("Entrez une langue svp.\n");
-			printf("<exemple> language english\n");
-			printf("          language français\n");
-		} else {
-			printf("Please input a language.\n");
-			printf("<example> language english\n");
-			printf("          language français\n");
-		}
-		return 136;
-	}
-
-	$language = uc(substr($language, 0, 1));
-	if ($language =~ /^[EF]$/) {
-		$defaultlanguage = $language;
-		if ($defaultlanguage == 'F') {
-			printf("Changement de la langue d'affichage en Français.\n");
-		} else {
-			printf("Displaying language changed to English.\n");
-		}
-	} else {
-		if ($defaultlanguage == 'F') {
-			printf("Langue non paramétrée (langues possibles: 'Français' ou 'English').\n");
-		} else {
-			printf("Undefined language (possible languages: Français or English).\n");
-		}
-	}
-
-	return 0;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: sending 'end of connection' packet
-sub quit() {
-	print $so pack("v", 0x7532);
-	$so->flush();
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Get datas from the socket
-sub readso() {
-	my($len) = shift;
-	my($buf);
-	if (read($so, $buf, $len) < $len) {
-		if ($defaultlanguage eq "F") {
-			print "Erreur de lecture sur la Socket.\n";
-		} else {
-			print "Socket read error.\n";
-		}
-		exit(3);
-	}
-	return $buf;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Input of a password
-sub typepasswd {
-	my($passwd1, $passwd2);
-	cbreak();
-	if ($defaultlanguage eq "F") {
-		print "Entrez le mot de passe > "; $passwd1 = <STDIN>; chomp($passwd1); print "\n";
-		print "Ré-entrez le mot de passe > "; $passwd2 = <STDIN>; chomp($passwd2); print "\n";
-	} else {
-		print "Type the password > "; $passwd1 = <STDIN>; chomp($passwd1); print "\n";
-		print "Verify the password > "; $passwd2 = <STDIN>; chomp($passwd2); print "\n";
-	}
-	cooked();
-	if ($passwd1 ne $passwd2) {
-		if ($defaultlanguage eq "F") {
-			print "Erreur de vérification du mot de passe: Saisissez le même mot de passe svp.\n";
-		} else {
-			print "Password verification failed. Please input same password.\n";
-		}
-		return "";
-	}
-	return $passwd1;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Return ordonal text of a number
-sub makeordinal {
-	my($c) = shift;
-	if ($defaultlanguage eq "F") {
-		if ($c < 1) {
-			return $c;
-		}
-		return $c.("er", "ème")[$c == 1 ? 0 : 1];
-	} else {
-		if ($c % 10 < 4 && $c % 10 != 0 && ($c < 10 || $c > 20)) {
-			return $c.("st","nd","rd")[$c % 10 - 1];
-		}
-		return $c."th";
-	}
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Test of the validity of an account name (return 0 if incorrect, and 1 if ok)
-sub verify_accountname {
-	my($account_name) = @_;       # Get the account_name
-	if ($account_name =~ /[\x00-\x1f]/) { # remove control char
-		my($c) = length($`) + 1;
-		if ($defaultlanguage eq "F") {
-			print "Caractère interdit trouvé dans le nom du compte (".makeordinal($c)." caractère).\n";
-		} else {
-			print "Illegal character found in the account name (".makeordinal($c)." character).\n";
-		}
-		return 0;
-	}
-	if (length($account_name) < 4) {
-		if ($defaultlanguage eq "F") {
-			print "Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n";
-		} else {
-			print "Account name is too short. Please input an account name of 4-23 bytes.\n";
-		}
-		return 0;
-	}
-	if (length($account_name) > 23) {
-		if ($defaultlanguage eq "F") {
-			print "Nom du compte trop long. Entrez un nom de compte de 4-23 caractères.\n";
-		} else {
-			print "Account name is too long. Please input an account name of 4-23 bytes.\n";
-		}
-		return 0;
-	}
-	return 1;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Test of the validity of password (return 0 if incorrect, and 1 if ok)
-sub verify_password {
-	my($password) = @_;       # Get the password
-	if ($password =~ /[\x00-\x1f]/) {
-		my($c) = length($`) + 1;
-		if ($defaultlanguage eq "F") {
-			print "Caractère interdit trouvé dans le mot de passe (".makeordinal($c)." caractère).\n";
-		} else {
-			print "Illegal character found in the password (".makeordinal($c)." character).\n";
-		}
-		return 0;
-	}
-	if (length($password) < 4) {
-		if ($defaultlanguage eq "F") {
-			print "Mot de passe trop court. Entrez un mot de passe de 4-23 caractères.\n";
-		} else {
-			print "Password is too short. Please input a password of 4-23 bytes.\n";
-		}
-		return 0;
-	}
-	if (length($password) > 23) {
-		if ($defaultlanguage eq "F") {
-			print "Mot de passe trop long. Entrez un mot de passe de 4-23 caractères.\n";
-		} else {
-			print "Password is too long. Please input a password of 4-23 bytes.\n";
-		}
-		return 0;
-	}
-	return 1;
-}
-
-#--------------------------------------------------------------------------
-
-# Sub-function: Test of the validity of an e-mail (return 0 if incorrect, and 1 if ok)
-sub verify_email {
-	my($email) = @_;       # Get the e-mail
-	# To ignore a '.' before the @ (wanadoo, a provider, do that)
-	$email =~ s/\.\@/\@/;
-	# If the e-mail is void, it's not correct -> return 0
-	if ($email eq '') {
-		return(0);
-	}
-	# If the e-mail have no "@", it's not correct -> return 0
-	if ($email !~ /\@/) {
-		return(0);
-	}
-	# If the e-mail have a ",", a space, a tab or a ";", it's not correct -> return 0
-	if ($email =~ /[\,|\s|\;]/) {
-		return(0)
-	};
-	# IF
-	#    (the e-mail contains 2 "@", or ".." or "@." or starts or finishes by a ".")
-	# OR IF
-	#    (the e-mail doesn't contain "@localhost" AND
-	# - it doesn't contain characters followed by "@" itself followed by letters itself followed by "." and 2 or more letters
-	# - or an IP address)
-	# -> so, it's not good ! (finish !)
-	if ($email =~ /(@.*@)|(\.\.)|(@\.)|(\.@)|(^\.)|(\.$)/ ||
-		($email !~ /^.+\@localhost$/ &&
-		$email !~ /^.+\@\[?(\w|[-.])+\.[a-zA-Z]{2,3}|[0-9]{1,3}\]?$/)) {
-		return(0); # non-valid email
-	} else {
-		# If not, the e-email address is correct
-		return(1); # valid email
-	}
-}
\ No newline at end of file