Clearing trunk.

git-svn-id: https://rathena.svn.sourceforge.net/svnroot/rathena/trunk@5091 54d463be-8e91-2dee-dedb-b68131a5f0ec

1 files changed, 0 insertions, 4383 deletions

diff --git a/src/ladmin/ladmin.c b/src/ladmin/ladmin.c
deleted file mode 100644
index 432a78a95..000000000
--- a/src/ladmin/ladmin.c
+++ /dev/null
@@ -1,4383 +0,0 @@
-// $Id: ladmin.c,v 1.1.1.1 2004/09/10 17:26:52 MagicalTux Exp $
-///////////////////////////////////////////////////////////////////////////
-// EAthena login-server remote administration tool
-// Ladamin in C by [Yor]
-// if you modify this software, modify ladmin in tool too.
-///////////////////////////////////////////////////////////////////////////
-
-#include <sys/types.h>
-#include <time.h>
-#ifdef WIN32
-#define WIN32_LEAN_AND_MEAN
-#include <winsock2.h>
-void Gettimeofday(struct timeval *timenow)
-{
-	time_t t;
-	t = clock();
-	timenow->tv_usec = t;
-	timenow->tv_sec = t / CLK_TCK;
-	return;
-}
-#define gettimeofday(timenow, dummy) Gettimeofday(timenow)
-#else
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <sys/time.h> // gettimeofday
-#include <sys/ioctl.h>
-#include <unistd.h> // close
-#include <arpa/inet.h> // inet_addr
-#include <netdb.h> // gethostbyname
-#endif
-#include <stdio.h>
-#include <stdlib.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <string.h> // str*
-#include <stdarg.h> // valist
-#include <ctype.h> // tolower
-
-#include "../common/strlib.h"
-#include "../common/core.h"
-#include "../common/socket.h"
-#include "ladmin.h"
-#include "../common/version.h"
-#include "../common/mmo.h"
-
-#ifdef PASSWORDENC
-#include "md5calc.h"
-#endif
-
-#ifdef MEMWATCH
-#include "memwatch.h"
-#endif
-
-//-------------------------------INSTRUCTIONS------------------------------
-// Set the variables below:
-//   IP of the login server.
-//   Port where the login-server listens incoming packets.
-//   Password of administration (same of config_athena.conf).
-//   Displayed language of the sofware (if not correct, english is used).
-// IMPORTANT:
-//   Be sure that you authorize remote administration in login-server
-//   (see login_athena.conf, 'admin_state' parameter)
-//-------------------------------------------------------------------------
-char loginserverip[16] = "127.0.0.1";        // IP of login-server
-int loginserverport = 6900;                  // Port of login-server
-char loginserveradminpassword[24] = "admin"; // Administration password
-#ifdef PASSWORDENC
-int passenc = 2;                             // Encoding type of the password
-#else
-int passenc = 0;                             // Encoding type of the password
-#endif
-char defaultlanguage = 'E';                  // Default language (F: Français/E: English)
-                                             // (if it's not 'F', default is English)
-char ladmin_log_filename[1024] = "log/ladmin.log";
-char date_format[32] = "%Y-%m-%d %H:%M:%S";
-//-------------------------------------------------------------------------
-//  LIST of COMMANDs that you can type at the prompt:
-//    To use these commands you can only type only the first letters.
-//    You must type a minimum of letters (you can not type 'a',
-//      because ladmin doesn't know if it's for 'aide' or for 'add')
-//    <Example> q <= quit, li <= list, pass <= passwd, etc.
-//
-//  Note: every time you must give a account_name, you can use "" or '' (spaces can be included)
-//
-//  aide/help/?
-//    Display the description of the commands
-//  aide/help/? [command]
-//    Display the description of the specified command
-//
-//  add <account_name> <sex> <password>
-//    Create an account with the default email (a@a.com).
-//    Concerning the sex, only the first letter is used (F or M).
-//    The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.
-//    When the password is omitted, the input is done without displaying of the pressed keys.
-//    <example> add testname Male testpass
-//
-//  ban/banish yyyy/mm/dd hh:mm:ss <account name>
-//    Changes the final date of a banishment of an account.
-//    Like banset, but <account name> is at end.
-//
-//  banadd <account_name> <modifier>
-//    Adds or substracts time from the final date of a banishment of an account.
-//    Modifier is done as follows:
-//      Adjustment value (-1, 1, +1, etc...)
-//      Modified element:
-//        a or y: year
-//        m:  month
-//        j or d: day
-//        h:  hour
-//        mn: minute
-//        s:  second
-//    <example> banadd testname +1m-2mn1s-6y
-//              this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
-//  NOTE: If you modify the final date of a non-banished account,
-//        you fix the final date to (actual time +- adjustments)
-//
-//  banset <account_name> yyyy/mm/dd [hh:mm:ss]
-//    Changes the final date of a banishment of an account.
-//    Default time [hh:mm:ss]: 23:59:59.
-//  banset <account_name> 0
-//    Set a non-banished account (0 = unbanished).
-//
-//  block <account name>
-//    Set state 5 (You have been blocked by the GM Team) to an account.
-//    Like state <account name> 5.
-//
-//  check <account_name> <password>
-//    Check the validity of a password for an account
-//    NOTE: Server will never sends back a password.
-//          It's the only method you have to know if a password is correct.
-//          The other method is to have a ('physical') access to the accounts file.
-//
-//  create <account_name> <sex> <email> <password>
-//    Like the 'add' command, but with e-mail moreover.
-//    <example> create testname Male my@mail.com testpass
-//
-//  del <account name>
-//    Remove an account.
-//    This order requires confirmation. After confirmation, the account is deleted.
-//
-//  email <account_name> <email>
-//    Modify the e-mail of an account.
-//
-//  getcount
-//    Give the number of players online on all char-servers.
-//
-//  gm <account_name> [GM_level]
-//    Modify the GM level of an account.
-//    Default value remove GM level (GM level = 0).
-//    <example> gm testname 80
-//
-//  id <account name>
-//    Give the id of an account.
-//
-//  info <account_id>
-//    Display complete information of an account.
-//
-//  kami <message>
-//    Sends a broadcast message on all map-server (in yellow).
-//  kamib <message>
-//    Sends a broadcast message on all map-server (in blue).
-//
-//  language <language>
-//    Change the language of displaying.
-//
-//  list/ls [start_id [end_id]]
-//    Display a list of accounts.
-//    'start_id', 'end_id': indicate end and start identifiers.
-//    Research by name is not possible with this command.
-//    <example> list 10 9999999
-//
-//  listBan/lsBan [start_id [end_id]]
-//    Like list/ls, but only for accounts with state or banished
-//
-//  listGM/lsGM [start_id [end_id]]
-//    Like list/ls, but only for GM accounts
-//
-//  listOK/lsOK [start_id [end_id]]
-//    Like list/ls, but only for accounts without state and not banished
-//
-//  memo <account_name> <memo>
-//    Modify the memo of an account.
-//    'memo': it can have until 253 characters (with spaces or not).
-//
-//  name <account_id>
-//    Give the name of an account.
-//
-//  passwd <account_name> <new_password>
-//    Change the password of an account.
-//    When new password is omitted, the input is done without displaying of the pressed keys.
-//
-//  quit/end/exit
-//    End of the program of administration
-//
-//  reloadGM
-//    Reload GM configuration file
-//
-//  search <expression>
-//    Seek accounts.
-//    Displays the accounts whose names correspond.
-//  search -r/-e/--expr/--regex <expression>
-//    Seek accounts by regular expression.
-//    Displays the accounts whose names correspond.
-//
-//  sex <account_name> <sex>
-//    Modify the sex of an account.
-//    <example> sex testname Male
-//
-//  state <account_name> <new_state> <error_message_#7>
-//    Change the state of an account.
-//    'new_state': state is the state of the packet 0x006a + 1. The possibilities are:
-//                 0 = Account ok            6 = Your Game's EXE file is not the latest version
-//                 1 = Unregistered ID       7 = You are Prohibited to log in until %s
-//                 2 = Incorrect Password    8 = Server is jammed due to over populated
-//                 3 = This ID is expired    9 = No MSG
-//                 4 = Rejected from Server  100 = This ID has been totally erased
-//                 5 = You have been blocked by the GM Team
-//                 all other values are 'No MSG', then use state 9 please.
-//    'error_message_#7': message of the code error 6 = Your are Prohibited to log in until %s (packet 0x006a)
-//
-//  timeadd <account_name> <modifier>
-//    Adds or substracts time from the validity limit of an account.
-//    Modifier is done as follows:
-//      Adjustment value (-1, 1, +1, etc...)
-//      Modified element:
-//        a or y: year
-//        m:  month
-//        j or d: day
-//        h:  hour
-//        mn: minute
-//        s:  second
-//    <example> timeadd testname +1m-2mn1s-6y
-//              this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
-//  NOTE: You can not modify a unlimited validity limit.
-//        If you want modify it, you want probably create a limited validity limit.
-//        So, at first, you must set the validity limit to a date/time.
-//
-//  timeset <account_name> yyyy/mm/dd [hh:mm:ss]
-//    Changes the validity limit of an account.
-//    Default time [hh:mm:ss]: 23:59:59.
-//  timeset <account_name> 0
-//    Gives an unlimited validity limit (0 = unlimited).
-//
-//  unban/unbanish <account name>
-//    Unban an account.
-//    Like banset <account name> 0.
-//
-//  unblock <account name>
-//    Set state 0 (Account ok) to an account.
-//    Like state <account name> 0.
-//
-//  version
-//    Display the version of the login-server.
-//
-//  who <account name>
-//    Displays complete information of an account.
-//
-//-------------------------------------------------------------------------
-int login_fd;
-int login_ip;
-int bytes_to_read = 0; // flag to know if we waiting bytes from login-server
-char command[1024];
-char parameters[1024];
-int list_first, list_last, list_type, list_count; // parameter to display a list of accounts
-int already_exit_function = 0; // sometimes, the exit function is called twice... so, don't log twice the message
-
-//------------------------------
-// Writing function of logs file
-//------------------------------
-int ladmin_log(char *fmt, ...) {
-	FILE *logfp;
-	va_list ap;
-	struct timeval tv;
-	char tmpstr[2048];
-
-	va_start(ap, fmt);
-
-	logfp = fopen(ladmin_log_filename, "a");
-	if (logfp) {
-		if (fmt[0] == '\0') // jump a line if no message
-			fprintf(logfp, RETCODE);
-		else {
-			gettimeofday(&tv, NULL);
-			strftime(tmpstr, 24, date_format, localtime((const time_t*)&(tv.tv_sec)));
-			sprintf(tmpstr + strlen(tmpstr), ".%03d: %s", (int)tv.tv_usec / 1000, fmt);
-			vfprintf(logfp, tmpstr, ap);
-		}
-		fclose(logfp);
-	}
-
-	va_end(ap);
-	return 0;
-}
-
-//---------------------------------------------
-// Function to return ordonal text of a number.
-//---------------------------------------------
-char* makeordinal(int number) {
-	if (defaultlanguage == 'F') {
-		if (number == 0)
-			return "";
-		else if (number == 1)
-			return "er";
-		else
-			return "ème";
-	} else {
-		if ((number % 10) < 4 && (number % 10) != 0 && (number < 10 || number > 20)) {
-			if ((number % 10) == 1)
-				return "st";
-			else if ((number % 10) == 2)
-				return "nd";
-			else
-				return "rd";
-		} else {
-			return "th";
-		}
-	}
-	return "";
-}
-
-//-----------------------------------------------------------------------------------------
-// Function to test of the validity of an account name (return 0 if incorrect, and 1 if ok)
-//-----------------------------------------------------------------------------------------
-int verify_accountname(char* account_name) {
-	int i;
-
-	for(i = 0; account_name[i]; i++) {
-		if (account_name[i] < 32) {
-			if (defaultlanguage == 'F') {
-				printf("Caractère interdit trouvé dans le nom du compte (%d%s caractère).\n", i+1, makeordinal(i+1));
-				ladmin_log("Caractère interdit trouvé dans le nom du compte (%d%s caractère)." RETCODE, i+1, makeordinal(i+1));
-			} else {
-				printf("Illegal character found in the account name (%d%s character).\n", i+1, makeordinal(i+1));
-				ladmin_log("Illegal character found in the account name (%d%s character)." RETCODE, i+1, makeordinal(i+1));
-			}
-			return 0;
-		}
-	}
-
-	if (strlen(account_name) < 4) {
-		if (defaultlanguage == 'F') {
-			printf("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n");
-			ladmin_log("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères." RETCODE);
-		} else {
-			printf("Account name is too short. Please input an account name of 4-23 bytes.\n");
-			ladmin_log("Account name is too short. Please input an account name of 4-23 bytes." RETCODE);
-		}
-		return 0;
-	}
-
-	if (strlen(account_name) > 23) {
-		if (defaultlanguage == 'F') {
-			printf("Nom du compte trop long. Entrez un nom de compte de 4-23 caractères.\n");
-			ladmin_log("Nom du compte trop long. Entrez un nom de compte de 4-23 caractères." RETCODE);
-		} else {
-			printf("Account name is too long. Please input an account name of 4-23 bytes.\n");
-			ladmin_log("Account name is too long. Please input an account name of 4-23 bytes." RETCODE);
-		}
-		return 0;
-	}
-
-	return 1;
-}
-
-//---------------------------------------------------
-// E-mail check: return 0 (not correct) or 1 (valid).
-//---------------------------------------------------
-int e_mail_check(char *email) {
-	char ch;
-	char* last_arobas;
-
-	// athena limits
-	if (strlen(email) < 3 || strlen(email) > 39)
-		return 0;
-
-	// part of RFC limits (official reference of e-mail description)
-	if (strchr(email, '@') == NULL || email[strlen(email)-1] == '@')
-		return 0;
-
-	if (email[strlen(email)-1] == '.')
-		return 0;
-
-	last_arobas = strrchr(email, '@');
-
-	if (strstr(last_arobas, "@.") != NULL ||
-	    strstr(last_arobas, "..") != NULL)
-		return 0;
-
-	for(ch = 1; ch < 32; ch++) {
-		if (strchr(last_arobas, ch) != NULL) {
-			return 0;
-			break;
-		}
-	}
-
-	if (strchr(last_arobas, ' ') != NULL ||
-	    strchr(last_arobas, ';') != NULL)
-		return 0;
-
-	// all correct
-	return 1;
-}
-
-//----------------------------------
-// Sub-function: Input of a password
-//----------------------------------
-int typepasswd(char * password) {
-	char password1[1023], password2[1023];
-	int letter;
-	int i;
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Aucun mot de passe n'a été donné. Demande d'un mot de passe." RETCODE);
-	} else {
-		ladmin_log("No password was given. Request to obtain a password." RETCODE);
-	}
-
-	memset(password1, '\0', sizeof(password1));
-	memset(password2, '\0', sizeof(password2));
-	if (defaultlanguage == 'F')
-		printf("\033[1;36m Entrez le mot de passe > \033[0;32;42m");
-	else
-		printf("\033[1;36m Type the password > \033[0;32;42m");
-		i = 0;
-		while ((letter = getchar()) != '\n')
-			password1[i++] = letter;
-	if (defaultlanguage == 'F')
-		printf("\033[0m\033[1;36m Ré-entrez le mot de passe > \033[0;32;42m");
-	else
-		printf("\033[0m\033[1;36m Verify the password > \033[0;32;42m");
-		i = 0;
-		while ((letter = getchar()) != '\n')
-			password2[i++] = letter;
-
-	printf("\033[0m");
-	fflush(stdout);
-	fflush(stdin);
-
-	if (strcmp(password1, password2) != 0) {
-		if (defaultlanguage == 'F') {
-			printf("Erreur de vérification du mot de passe: Saisissez le même mot de passe svp.\n");
-			ladmin_log("Erreur de vérification du mot de passe: Saisissez le même mot de passe svp." RETCODE);
-			ladmin_log("  Premier mot de passe: %s, second mot de passe: %s." RETCODE, password1, password2);
-		} else {
-			printf("Password verification failed. Please input same password.\n");
-			ladmin_log("Password verification failed. Please input same password." RETCODE);
-			ladmin_log("  First password: %s, second password: %s." RETCODE, password1, password2);
-		}
-		return 0;
-	}
-	if (defaultlanguage == 'F') {
-		ladmin_log("Mot de passe saisi: %s." RETCODE, password1);
-	} else {
-		ladmin_log("Typed password: %s." RETCODE, password1);
-	}
-	strcpy(password, password1);
-	return 1;
-}
-
-//------------------------------------------------------------------------------------
-// Sub-function: Test of the validity of password (return 0 if incorrect, and 1 if ok)
-//------------------------------------------------------------------------------------
-int verify_password(char * password) {
-	int i;
-
-	for(i = 0; password[i]; i++) {
-		if (password[i] < 32) {
-			if (defaultlanguage == 'F') {
-				printf("Caractère interdit trouvé dans le mot de passe (%d%s caractère).\n", i+1, makeordinal(i+1));
-				ladmin_log("Caractère interdit trouvé dans le nom du compte (%d%s caractère)." RETCODE, i+1, makeordinal(i+1));
-			} else {
-				printf("Illegal character found in the password (%d%s character).\n", i+1, makeordinal(i+1));
-				ladmin_log("Illegal character found in the password (%d%s character)." RETCODE, i+1, makeordinal(i+1));
-			}
-			return 0;
-		}
-	}
-
-	if (strlen(password) < 4) {
-		if (defaultlanguage == 'F') {
-			printf("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n");
-			ladmin_log("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères." RETCODE);
-		} else {
-			printf("Account name is too short. Please input an account name of 4-23 bytes.\n");
-			ladmin_log("Account name is too short. Please input an account name of 4-23 bytes." RETCODE);
-		}
-		return 0;
-	}
-
-	if (strlen(password) > 23) {
-		if (defaultlanguage == 'F') {
-			printf("Mot de passe trop long. Entrez un mot de passe de 4-23 caractères.\n");
-			ladmin_log("Mot de passe trop long. Entrez un mot de passe de 4-23 caractères." RETCODE);
-		} else {
-			printf("Password is too long. Please input a password of 4-23 bytes.\n");
-			ladmin_log("Password is too long. Please input a password of 4-23 bytes." RETCODE);
-		}
-		return 0;
-	}
-
-	return 1;
-}
-
-//------------------------------------------------------------------
-// Sub-function: Check the name of a command (return complete name)
-//-----------------------------------------------------------------
-int check_command(char * command) {
-// help
-	if (strncmp(command, "aide", 2) == 0 && strncmp(command, "aide", strlen(command)) == 0) // not 1 letter command: 'aide' or 'add'?
-		strcpy(command, "aide");
-	else if (strncmp(command, "help", 1) == 0 && strncmp(command, "help", strlen(command)) == 0)
-		strcpy(command, "help");
-// general commands
-	else if (strncmp(command, "add", 2) == 0 && strncmp(command, "add", strlen(command)) == 0) // not 1 letter command: 'aide' or 'add'?
-		strcpy(command, "add");
-	else if ((strncmp(command, "ban", 3) == 0 && strncmp(command, "ban", strlen(command)) == 0) ||
-	         (strncmp(command, "banish", 4) == 0 && strncmp(command, "banish", strlen(command)) == 0))
-		strcpy(command, "ban");
-	else if ((strncmp(command, "banadd", 4) == 0 && strncmp(command, "banadd", strlen(command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ?
-	         strcmp(command,   "ba") == 0)
-		strcpy(command, "banadd");
-	else if ((strncmp(command, "banset", 4) == 0 && strncmp(command, "banset", strlen(command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ?
-	         strcmp(command,   "bs") == 0)
-		strcpy(command, "banset");
-	else if (strncmp(command, "block", 2) == 0 && strncmp(command, "block", strlen(command)) == 0)
-		strcpy(command, "block");
-	else if (strncmp(command, "check", 2) == 0 && strncmp(command, "check", strlen(command)) == 0) // not 1 letter command: 'check' or 'create'?
-		strcpy(command, "check");
-	else if (strncmp(command, "create", 2) == 0 && strncmp(command, "create", strlen(command)) == 0) // not 1 letter command: 'check' or 'create'?
-		strcpy(command, "create");
-	else if (strncmp(command, "delete", 1) == 0 && strncmp(command, "delete", strlen(command)) == 0)
-		strcpy(command, "delete");
-	else if ((strncmp(command, "email", 2) == 0 && strncmp(command, "email", strlen(command)) == 0) || // not 1 letter command: 'email', 'end' or 'exit'?
-	         (strncmp(command, "e-mail", 2) == 0 && strncmp(command, "e-mail", strlen(command)) == 0))
-		strcpy(command, "email");
-	else if (strncmp(command, "getcount", 2) == 0 && strncmp(command, "getcount", strlen(command)) == 0) // not 1 letter command: 'getcount' or 'gm'?
-		strcpy(command, "getcount");
-//	else if (strncmp(command, "gm", 2) == 0 && strncmp(command, "gm", strlen(command)) == 0) // not 1 letter command: 'getcount' or 'gm'?
-//		strcpy(command, "gm");
-//	else if (strncmp(command, "id", 2) == 0 && strncmp(command, "id", strlen(command)) == 0) // not 1 letter command: 'id' or 'info'?
-//		strcpy(command, "id");
-	else if (strncmp(command, "info", 2) == 0 && strncmp(command, "info", strlen(command)) == 0) // not 1 letter command: 'id' or 'info'?
-		strcpy(command, "info");
-//	else if (strncmp(command, "kami", 4) == 0 && strncmp(command, "kami", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'?
-//		strcpy(command, "kami");
-//	else if (strncmp(command, "kamib", 5) == 0 && strncmp(command, "kamib", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'?
-//		strcpy(command, "kamib");
-	else if ((strncmp(command, "language", 2) == 0 && strncmp(command, "language", strlen(command)) == 0)) // not 1 letter command: 'language' or 'list'?
-		strcpy(command, "language");
-	else if ((strncmp(command, "list", 2) == 0 && strncmp(command, "list", strlen(command)) == 0) || // 'list' is default list command // not 1 letter command: 'language' or 'list'?
-	         strcmp(command,   "ls") == 0)
-		strcpy(command, "list");
-	else if ((strncmp(command, "listban", 5) == 0 && strncmp(command, "listban", strlen(command)) == 0) ||
-	         (strncmp(command, "lsban", 3) == 0 && strncmp(command, "lsban", strlen(command)) == 0) ||
-	         strcmp(command, "lb") == 0)
-		strcpy(command, "listban");
-	else if ((strncmp(command, "listgm", 5) == 0 && strncmp(command, "listgm", strlen(command)) == 0) ||
-	         (strncmp(command, "lsgm", 3) == 0 && strncmp(command, "lsgm", strlen(command)) == 0) ||
-	         strcmp(command,  "lg") == 0)
-		strcpy(command, "listgm");
-	else if ((strncmp(command, "listok", 5) == 0 && strncmp(command, "listok", strlen(command)) == 0) ||
-	         (strncmp(command, "lsok", 3) == 0 && strncmp(command, "lsok", strlen(command)) == 0) ||
-	         strcmp(command, "lo") == 0)
-		strcpy(command, "listok");
-	else if (strncmp(command, "memo", 1) == 0 && strncmp(command, "memo", strlen(command)) == 0)
-		strcpy(command, "memo");
-	else if (strncmp(command, "name", 1) == 0 && strncmp(command, "name", strlen(command)) == 0)
-		strcpy(command, "name");
-	else if ((strncmp(command, "password", 1) == 0 && strncmp(command, "password", strlen(command)) == 0) ||
-	         strcmp(command, "passwd") == 0)
-		strcpy(command, "password");
-	else if (strncmp(command, "reloadgm", 1) == 0 && strncmp(command, "reloadgm", strlen(command)) == 0)
-		strcpy(command, "reloadgm");
-	else if (strncmp(command, "search", 3) == 0 && strncmp(command, "search", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'?
-		strcpy(command, "search"); // not 2 letters command: 'search' or 'sex'?
-//	else if (strncmp(command, "sex", 3) == 0 && strncmp(command, "sex", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'?
-//		strcpy(command, "sex"); // not 2 letters command: 'search' or 'sex'?
-	else if (strncmp(command, "state", 2) == 0 && strncmp(command, "state", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'?
-		strcpy(command, "state");
-	else if ((strncmp(command, "timeadd", 5) == 0 && strncmp(command, "timeadd", strlen(command)) == 0) || // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'?
-	         strcmp(command,  "ta") == 0)
-		strcpy(command, "timeadd");
-	else if ((strncmp(command, "timeset", 5) == 0 && strncmp(command, "timeset", strlen(command)) == 0) || // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'?
-	         strcmp(command,  "ts") == 0)
-		strcpy(command, "timeset");
-	else if ((strncmp(command, "unban", 5) == 0 && strncmp(command, "unban", strlen(command)) == 0) ||
-	         (strncmp(command, "unbanish", 4) == 0 && strncmp(command, "unbanish", strlen(command)) == 0))
-		strcpy(command, "unban");
-	else if (strncmp(command, "unblock", 4) == 0 && strncmp(command, "unblock", strlen(command)) == 0)
-		strcpy(command, "unblock");
-	else if (strncmp(command, "version", 1) == 0 && strncmp(command, "version", strlen(command)) == 0)
-		strcpy(command, "version");
-	else if (strncmp(command, "who", 1) == 0 && strncmp(command, "who", strlen(command)) == 0)
-		strcpy(command, "who");
-// quit
-	else if (strncmp(command, "quit", 1) == 0 && strncmp(command, "quit", strlen(command)) == 0)
-		strcpy(command, "quit");
-	else if (strncmp(command, "exit", 2) == 0 && strncmp(command, "exit", strlen(command)) == 0) // not 1 letter command: 'email', 'end' or 'exit'?
-		strcpy(command, "exit");
-	else if (strncmp(command, "end", 2) == 0 && strncmp(command, "end", strlen(command)) == 0) // not 1 letter command: 'email', 'end' or 'exit'?
-		strcpy(command, "end");
-
-	return 0;
-}
-
-//-----------------------------------------
-// Sub-function: Display commands of ladmin
-//-----------------------------------------
-void display_help(char* param, int language) {
-	char command[1023];
-	int i;
-
-	memset(command, '\0', sizeof(command));
-
-	if (sscanf(param, "%s ", command) < 1 || strlen(command) == 0)
-		strcpy(command, ""); // any value that is not a command
-
-	if (command[0] == '?') {
-		if (defaultlanguage == 'F')
-			strcpy(command, "aide");
-		else
-			strcpy(command, "help");
-	}
-
-	// lowercase for command
-	for (i = 0; command[i]; i++)
-		command[i] = tolower(command[i]);
-
-	// Analyse of the command
-	check_command(command); // give complete name to the command
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Affichage des commandes ou d'une commande." RETCODE);
-	} else {
-		ladmin_log("Displaying of the commands or a command." RETCODE);
-	}
-
-	if (language == 1) {
-		if (strcmp(command, "aide") == 0) {
-			printf("aide/help/?\n");
-			printf("  Affiche la description des commandes\n");
-			printf("aide/help/? [commande]\n");
-			printf("  Affiche la description de la commande specifiée\n");
-		} else if (strcmp(command, "help") == 0 ) {
-			printf("aide/help/?\n");
-			printf("  Display the description of the commands\n");
-			printf("aide/help/? [command]\n");
-			printf("  Display the description of the specified command\n");
-// general commands
-		} else if (strcmp(command, "add") == 0) {
-			printf("add <nomcompte> <sexe> <motdepasse>\n");
-			printf("  Crée un compte avec l'email par défaut (a@a.com).\n");
-			printf("  Concernant le sexe, seule la première lettre compte (F ou M).\n");
-			printf("  L'e-mail est a@a.com (e-mail par défaut). C'est comme n'avoir aucun e-mail.\n");
-			printf("  Lorsque motdepasse est omis, la saisie se fait sans que la frappe se voit.\n");
-			printf("  <exemple> add testname Male testpass\n");
-		} else if (strcmp(command, "ban") == 0) {
-			printf("ban/banish aaaa/mm/jj hh:mm:ss <nom compte>\n");
-			printf("  Change la date de fin de bannissement d'un compte.\n");
-			printf("  Comme banset, mais <nom compte> est à la fin.\n");
-		} else if (strcmp(command, "banadd") == 0) {
-			printf("banadd <nomcompte> <Modificateur>\n");
-			printf("  Ajoute ou soustrait du temps à la date de banissement d'un compte.\n");
-			printf("  Les modificateurs sont construits comme suit:\n");
-			printf("    Valeur d'ajustement (-1, 1, +1, etc...)\n");
-			printf("    Elément modifié:\n");
-			printf("      a ou y: année\n");
-			printf("      m:      mois\n");
-			printf("      j ou d: jour\n");
-			printf("      h:      heure\n");
-			printf("      mn:     minute\n");
-			printf("      s:      seconde\n");
-			printf("  <exemple> banadd testname +1m-2mn1s-6a\n");
-			printf("            Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n");
-			printf("            et 6 ans dans le même temps.\n");
-			printf("NOTE: Si vous modifez la date de banissement d'un compte non bani,\n");
-			printf("      vous indiquez comme date (le moment actuel +- les ajustements)\n");
-		} else if (strcmp(command, "banset") == 0) {
-			printf("banset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n");
-			printf("  Change la date de fin de bannissement d'un compte.\n");
-			printf("  Heure par défaut [hh:mm:ss]: 23:59:59.\n");
-			printf("banset <nomcompte> 0\n");
-			printf("  Débanni un compte (0 = de-banni).\n");
-		} else if (strcmp(command, "block") == 0) {
-			printf("block <nom compte>\n");
-			printf("  Place le status d'un compte à 5 (You have been blocked by the GM Team).\n");
-			printf("  La commande est l'équivalent de state <nom_compte> 5.\n");
-		} else if (strcmp(command, "check") == 0) {
-			printf("check <nomcompte> <motdepasse>\n");
-			printf("  Vérifie la validité d'un mot de passe pour un compte\n");
-			printf("  NOTE: Le serveur n'enverra jamais un mot de passe.\n");
-			printf("        C'est la seule méthode que vous possédez pour savoir\n");
-			printf("        si un mot de passe est le bon. L'autre méthode est\n");
-			printf("        d'avoir un accès ('physique') au fichier des comptes.\n");
-		} else if (strcmp(command, "create") == 0) {
-			printf("create <nomcompte> <sexe> <email> <motdepasse>\n");
-			printf("  Comme la commande add, mais avec l'e-mail en plus.\n");
-			printf("  <exemple> create testname Male mon@mail.com testpass\n");
-		} else if (strcmp(command, "delete") == 0) {
-			printf("del <nom compte>\n");
-			printf("  Supprime un compte.\n");
-			printf("  La commande demande confirmation. Après confirmation, le compte est détruit.\n");
-		} else if (strcmp(command, "email") == 0) {
-			printf("email <nomcompte> <email>\n");
-			printf("  Modifie l'e-mail d'un compte.\n");
-		} else if (strcmp(command, "getcount") == 0) {
-			printf("getcount\n");
-			printf("  Donne le nombre de joueurs en ligne par serveur de char.\n");
-		} else if (strcmp(command, "gm") == 0) {
-			printf("gm <nomcompte> [Niveau_GM]\n");
-			printf("  Modifie le niveau de GM d'un compte.\n");
-			printf("  Valeur par défaut: 0 (suppression du niveau de GM).\n");
-			printf("  <exemple> gm nomtest 80\n");
-		} else if (strcmp(command, "id") == 0) {
-			printf("id <nom compte>\n");
-			printf("  Donne l'id d'un compte.\n");
-		} else if (strcmp(command, "info") == 0) {
-			printf("info <idcompte>\n");
-			printf("  Affiche les informations sur un compte.\n");
-		} else if (strcmp(command, "kami") == 0) {
-			printf("kami <message>\n");
-			printf("  Envoi un message général sur tous les serveurs de map (en jaune).\n");
-		} else if (strcmp(command, "kamib") == 0) {
-			printf("kamib <message>\n");
-			printf("  Envoi un message général sur tous les serveurs de map (en bleu).\n");
-		} else if (strcmp(command, "language") == 0) {
-			printf("language <langue>\n");
-			printf("  Change la langue d'affichage.\n");
-			printf("  Langues possibles: 'Français' ou 'English'.\n");
-		} else if (strcmp(command, "list") == 0) {
-			printf("list/ls [Premier_id [Dernier_id]]\n");
-			printf("  Affiche une liste de comptes.\n");
-			printf("  'Premier_id', 'Dernier_id': indique les identifiants de départ et de fin.\n");
-			printf("  La recherche par nom n'est pas possible avec cette commande.\n");
-			printf("  <example> list 10 9999999\n");
-		} else if (strcmp(command, "listban") == 0) {
-			printf("listBan/lsBan [Premier_id [Dernier_id]]\n");
-			printf("  Comme list/ls, mais seulement pour les comptes avec statut ou bannis.\n");
-		} else if (strcmp(command, "listgm") == 0) {
-			printf("listGM/lsGM [Premier_id [Dernier_id]]\n");
-			printf("  Comme list/ls, mais seulement pour les comptes GM.\n");
-		} else if (strcmp(command, "listok") == 0) {
-			printf("listOK/lsOK [Premier_id [Dernier_id]]\n");
-			printf("  Comme list/ls, mais seulement pour les comptes sans statut et non bannis.\n");
-		} else if (strcmp(command, "memo") == 0) {
-			printf("memo <nomcompte> <memo>\n");
-			printf("  Modifie le mémo d'un compte.\n");
-			printf("  'memo': Il peut avoir jusqu'à 253 caractères (avec des espaces ou non).\n");
-		} else if (strcmp(command, "name") == 0) {
-			printf("name <idcompte>\n");
-			printf("  Donne le nom d'un compte.\n");
-		} else if (strcmp(command, "password") == 0) {
-			printf("passwd <nomcompte> <nouveaumotdepasse>\n");
-			printf("  Change le mot de passe d'un compte.\n");
-			printf("  Lorsque nouveaumotdepasse est omis,\n");
-			printf("  la saisie se fait sans que la frappe ne se voit.\n");
-		} else if (strcmp(command, "reloadgm") == 0) {
-			printf("reloadGM\n");
-			printf("  Reload GM configuration file\n");
-		} else if (strcmp(command, "search") == 0) {
-			printf("search <expression>\n");
-			printf("  Cherche des comptes.\n");
-			printf("  Affiche les comptes dont les noms correspondent.\n");
-//			printf("search -r/-e/--expr/--regex <expression>\n");
-//			printf("  Cherche des comptes par expression regulière.\n");
-//			printf("  Affiche les comptes dont les noms correspondent.\n");
-		} else if (strcmp(command, "sex") == 0) {
-			printf("sex <nomcompte> <sexe>\n");
-			printf("  Modifie le sexe d'un compte.\n");
-			printf("  <exemple> sex testname Male\n");
-		} else if (strcmp(command, "state") == 0) {
-			printf("state <nomcompte> <nouveaustatut> <message_erreur_7>\n");
-			printf("  Change le statut d'un compte.\n");
-			printf("  'nouveaustatut': Le statut est le même que celui du packet 0x006a + 1.\n");
-			printf("               les possibilités sont:\n");
-			printf("               0 = Compte ok\n");
-			printf("               1 = Unregistered ID\n");
-			printf("               2 = Incorrect Password\n");
-			printf("               3 = This ID is expired\n");
-			printf("               4 = Rejected from Server\n");
-			printf("               5 = You have been blocked by the GM Team\n");
-			printf("               6 = Your Game's EXE file is not the latest version\n");
-			printf("               7 = You are Prohibited to log in until...\n");
-			printf("               8 = Server is jammed due to over populated\n");
-			printf("               9 = No MSG\n");
-			printf("               100 = This ID has been totally erased\n");
-			printf("               all other values are 'No MSG', then use state 9 please.\n");
-			printf("  'message_erreur_7': message du code erreur 6 =\n");
-			printf("                      = Your are Prohibited to log in until... (packet 0x006a)\n");
-		} else if (strcmp(command, "timeadd") == 0) {
-			printf("timeadd <nomcompte> <modificateur>\n");
-			printf("  Ajoute/soustrait du temps à la limite de validité d'un compte.\n");
-			printf("  Le modificateur est composé comme suit:\n");
-			printf("    Valeur modificatrice (-1, 1, +1, etc...)\n");
-			printf("    Elément modifié:\n");
-			printf("      a ou y: année\n");
-			printf("      m:      mois\n");
-			printf("      j ou d: jour\n");
-			printf("      h:      heure\n");
-			printf("      mn:     minute\n");
-			printf("      s:      seconde\n");
-			printf("  <exemple> timeadd testname +1m-2mn1s-6a\n");
-			printf("            Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n");
-			printf("            et 6 ans dans le même temps.\n");
-			printf("NOTE: Vous ne pouvez pas modifier une limite de validité illimitée. Si vous\n");
-			printf("      désirez le faire, c'est que vous voulez probablement créer un limite de\n");
-			printf("      validité limitée. Donc, en premier, fixé une limite de valitidé.\n");
-		} else if (strcmp(command, "timeadd") == 0) {
-			printf("timeset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n");
-			printf("  Change la limite de validité d'un compte.\n");
-			printf("  Heure par défaut [hh:mm:ss]: 23:59:59.\n");
-			printf("timeset <nomcompte> 0\n");
-			printf("  Donne une limite de validité illimitée (0 = illimitée).\n");
-		} else if (strcmp(command, "unban") == 0) {
-			printf("unban/unbanish <nom compte>\n");
-			printf("  Ote le banissement d'un compte.\n");
-			printf("  La commande est l'équivalent de banset <nom_compte> 0.\n");
-		} else if (strcmp(command, "unblock") == 0) {
-			printf("unblock <nom compte>\n");
-			printf("  Place le status d'un compte à 0 (Compte ok).\n");
-			printf("  La commande est l'équivalent de state <nom_compte> 0.\n");
-		} else if (strcmp(command, "version") == 0) {
-			printf("version\n");
-			printf("  Affiche la version du login-serveur.\n");
-		} else if (strcmp(command, "who") == 0) {
-			printf("who <nom compte>\n");
-			printf("  Affiche les informations sur un compte.\n");
-// quit
-		} else if (strcmp(command, "quit") == 0 ||
-		           strcmp(command, "exit") == 0 ||
-		           strcmp(command, "end") == 0) {
-			printf("quit/end/exit\n");
-			printf("  Fin du programme d'administration.\n");
-// unknown command
-		} else {
-			if (strlen(command) > 0)
-				printf("Commande inconnue [%s] pour l'aide. Affichage de toutes les commandes.\n", command);
-			printf(" aide/help/?                             -- Affiche cet aide\n");
-			printf(" aide/help/? [commande]                  -- Affiche l'aide de la commande\n");
-			printf(" add <nomcompte> <sexe> <motdepasse>     -- Crée un compte (sans email)\n");
-			printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom compte> -- Fixe la date finale de banismnt\n");
-			printf(" banadd/ba <nomcompte> <modificateur>    -- Ajout/soustrait du temps à la\n");
-			printf("   exemple: ba moncompte +1m-2mn1s-2y       date finale de banissement\n");
-			printf(" banset/bs <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la date fin de banisemnt\n");
-			printf(" banset/bs <nomcompte> 0                 -- Dé-banis un compte.\n");
-			printf(" block <nom compte>  -- Mets le status d'un compte à 5 (blocked by the GM Team)\n");
-			printf(" check <nomcompte> <motdepasse>          -- Vérifie un mot de passe d'un compte\n");
-			printf(" create <nomcompte> <sexe> <email> <motdepasse> -- Crée un compte (avec email)\n");
-			printf(" del <nom compte>                        -- Supprime un compte\n");
-			printf(" email <nomcompte> <email>               -- Modifie l'e-mail d'un compte\n");
-			printf(" getcount                                -- Donne le nb de joueurs en ligne\n");
-			printf("  gm <nomcompte> [Niveau_GM]              -- Modifie le niveau de GM d'un compte\n");
-			printf(" id <nom compte>                         -- Donne l'id d'un compte\n");
-			printf(" info <idcompte>                         -- Affiche les infos sur un compte\n");
-			printf(" kami <message>                          -- Envoi un message général (en jaune)\n");
-			printf(" kamib <message>                         -- Envoi un message général (en bleu)\n");
-			printf(" language <langue>                       -- Change la langue d'affichage.\n");
-			printf(" list/ls [Premier_id [Dernier_id] ]      -- Affiche une liste de comptes\n");
-			printf(" listBan/lsBan [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n");
-			printf("                                             avec un statut ou bannis\n");
-			printf(" listGM/lsGM [Premier_id [Dernier_id] ]  -- Affiche une liste de comptes GM\n");
-			printf(" listOK/lsOK [Premier_id [Dernier_id] ]  -- Affiche une liste de comptes\n");
-			printf("                                            sans status et non bannis\n");
-			printf(" memo <nomcompte> <memo>                 -- Modifie le memo d'un compte\n");
-			printf(" name <idcompte>                         -- Donne le nom d'un compte\n");
-			printf(" passwd <nomcompte> <nouveaumotdepasse>  -- Change le mot de passe d'un compte\n");
-			printf(" quit/end/exit                           -- Fin du programme d'administation\n");
-			printf(" reloadGM                              -- Recharger le fichier de config des GM\n");
-			printf(" search <expression>                     -- Cherche des comptes\n");
-//			printf(" search -e/-r/--expr/--regex <expression> -- Cherche des comptes par REGEX\n");
-			printf(" sex <nomcompte> <sexe>                  -- Modifie le sexe d'un compte\n");
-			printf(" state <nomcompte> <nouveaustatut> <messageerr7> -- Change le statut d'1 compte\n");
-			printf(" timeadd/ta <nomcompte> <modificateur>   -- Ajout/soustrait du temps à la\n");
-			printf("   exemple: ta moncompte +1m-2mn1s-2y       limite de validité\n");
-			printf(" timeset/ts <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la limite de validité\n");
-			printf(" timeset/ts <nomcompte> 0                -- limite de validité = illimitée\n");
-			printf(" unban/unbanish <nom compte>             -- Ote le banissement d'un compte\n");
-			printf(" unblock <nom compte>             -- Mets le status d'un compte à 0 (Compte ok)\n");
-			printf(" version                                 -- Donne la version du login-serveur\n");
-			printf(" who <nom compte>                        -- Affiche les infos sur un compte\n");
-			printf(" Note: Pour les noms de compte avec des espaces, tapez \"<nom compte>\" (ou ').\n");
-		}
-	} else {
-		if (strcmp(command, "aide") == 0) {
-			printf("aide/help/?\n");
-			printf("  Display the description of the commands\n");
-			printf("aide/help/? [command]\n");
-			printf("  Display the description of the specified command\n");
-		} else if (strcmp(command, "help") == 0 ) {
-			printf("aide/help/?\n");
-			printf("  Display the description of the commands\n");
-			printf("aide/help/? [command]\n");
-			printf("  Display the description of the specified command\n");
-// general commands
-		} else if (strcmp(command, "add") == 0) {
-			printf("add <account_name> <sex> <password>\n");
-			printf("  Create an account with the default email (a@a.com).\n");
-			printf("  Concerning the sex, only the first letter is used (F or M).\n");
-			printf("  The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.\n");
-			printf("  When the password is omitted,\n");
-			printf("  the input is done without displaying of the pressed keys.\n");
-			printf("  <example> add testname Male testpass\n");
-		} else if (strcmp(command, "ban") == 0) {
-			printf("ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
-			printf("  Changes the final date of a banishment of an account.\n");
-			printf("  Like banset, but <account name> is at end.\n");
-		} else if (strcmp(command, "banadd") == 0) {
-			printf("banadd <account_name> <modifier>\n");
-			printf("  Adds or substracts time from the final date of a banishment of an account.\n");
-			printf("  Modifier is done as follows:\n");
-			printf("    Adjustment value (-1, 1, +1, etc...)\n");
-			printf("    Modified element:\n");
-			printf("      a or y: year\n");
-			printf("      m:  month\n");
-			printf("      j or d: day\n");
-			printf("      h:  hour\n");
-			printf("      mn: minute\n");
-			printf("      s:  second\n");
-			printf("  <example> banadd testname +1m-2mn1s-6y\n");
-			printf("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
-			printf("            and 6 years at the same time.\n");
-			printf("NOTE: If you modify the final date of a non-banished account,\n");
-			printf("      you fix the final date to (actual time +- adjustments)\n");
-		} else if (strcmp(command, "banset") == 0) {
-			printf("banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-			printf("  Changes the final date of a banishment of an account.\n");
-			printf("  Default time [hh:mm:ss]: 23:59:59.\n");
-			printf("banset <account_name> 0\n");
-			printf("  Set a non-banished account (0 = unbanished).\n");
-		} else if (strcmp(command, "block") == 0) {
-			printf("block <account name>\n");
-			printf("  Set state 5 (You have been blocked by the GM Team) to an account.\n");
-			printf("  This command works like state <account_name> 5.\n");
-		} else if (strcmp(command, "check") == 0) {
-			printf("check <account_name> <password>\n");
-			printf("  Check the validity of a password for an account.\n");
-			printf("  NOTE: Server will never sends back a password.\n");
-			printf("        It's the only method you have to know if a password is correct.\n");
-			printf("        The other method is to have a ('physical') access to the accounts file.\n");
-		} else if (strcmp(command, "create") == 0) {
-			printf("create <account_name> <sex> <email> <password>\n");
-			printf("  Like the 'add' command, but with e-mail moreover.\n");
-			printf("  <example> create testname Male my@mail.com testpass\n");
-		} else if (strcmp(command, "delete") == 0) {
-			printf("del <account name>\n");
-			printf("  Remove an account.\n");
-			printf("  This order requires confirmation. After confirmation, the account is deleted.\n");
-		} else if (strcmp(command, "email") == 0) {
-			printf("email <account_name> <email>\n");
-			printf("  Modify the e-mail of an account.\n");
-		} else if (strcmp(command, "getcount") == 0) {
-			printf("getcount\n");
-			printf("  Give the number of players online on all char-servers.\n");
-		} else if (strcmp(command, "gm") == 0) {
-			printf("gm <account_name> [GM_level]\n");
-			printf("  Modify the GM level of an account.\n");
-			printf("  Default value remove GM level (GM level = 0).\n");
-			printf("  <example> gm testname 80\n");
-		} else if (strcmp(command, "id") == 0) {
-			printf("id <account name>\n");
-			printf("  Give the id of an account.\n");
-		} else if (strcmp(command, "info") == 0) {
-			printf("info <account_id>\n");
-			printf("  Display complete information of an account.\n");
-		} else if (strcmp(command, "kami") == 0) {
-			printf("kami <message>\n");
-			printf("  Sends a broadcast message on all map-server (in yellow).\n");
-		} else if (strcmp(command, "kamib") == 0) {
-			printf("kamib <message>\n");
-			printf("  Sends a broadcast message on all map-server (in blue).\n");
-		} else if (strcmp(command, "language") == 0) {
-			printf("language <language>\n");
-			printf("  Change the language of displaying.\n");
-			printf("  Possible languages: Français or English.\n");
-		} else if (strcmp(command, "list") == 0) {
-			printf("list/ls [start_id [end_id]]\n");
-			printf("  Display a list of accounts.\n");
-			printf("  'start_id', 'end_id': indicate end and start identifiers.\n");
-			printf("  Research by name is not possible with this command.\n");
-			printf("  <example> list 10 9999999\n");
-		} else if (strcmp(command, "listban") == 0) {
-			printf("listBan/lsBan [start_id [end_id]]\n");
-			printf("  Like list/ls, but only for accounts with state or banished.\n");
-		} else if (strcmp(command, "listgm") == 0) {
-			printf("listGM/lsGM [start_id [end_id]]\n");
-			printf("  Like list/ls, but only for GM accounts.\n");
-		} else if (strcmp(command, "listok") == 0) {
-			printf("listOK/lsOK [start_id [end_id]]\n");
-			printf("  Like list/ls, but only for accounts without state and not banished.\n");
-		} else if (strcmp(command, "memo") == 0) {
-			printf("memo <account_name> <memo>\n");
-			printf("  Modify the memo of an account.\n");
-			printf("  'memo': it can have until 253 characters (with spaces or not).\n");
-		} else if (strcmp(command, "name") == 0) {
-			printf("name <account_id>\n");
-			printf("  Give the name of an account.\n");
-		} else if (strcmp(command, "password") == 0) {
-			printf("passwd <account_name> <new_password>\n");
-			printf("  Change the password of an account.\n");
-			printf("  When new password is omitted,\n");
-			printf("  the input is done without displaying of the pressed keys.\n");
-		} else if (strcmp(command, "reloadgm") == 0) {
-			printf("reloadGM\n");
-			printf("  Reload GM configuration file\n");
-		} else if (strcmp(command, "search") == 0) {
-			printf("search <expression>\n");
-			printf("  Seek accounts.\n");
-			printf("  Displays the accounts whose names correspond.\n");
-//			printf("search -r/-e/--expr/--regex <expression>\n");
-//			printf("  Seek accounts by regular expression.\n");
-//			printf("  Displays the accounts whose names correspond.\n");
-		} else if (strcmp(command, "sex") == 0) {
-			printf("sex <account_name> <sex>\n");
-			printf("  Modify the sex of an account.\n");
-			printf("  <example> sex testname Male\n");
-		} else if (strcmp(command, "state") == 0) {
-			printf("state <account_name> <new_state> <error_message_#7>\n");
-			printf("  Change the state of an account.\n");
-			printf("  'new_state': state is the state of the packet 0x006a + 1.\n");
-			printf("               The possibilities are:\n");
-			printf("               0 = Account ok\n");
-			printf("               1 = Unregistered ID\n");
-			printf("               2 = Incorrect Password\n");
-			printf("               3 = This ID is expired\n");
-			printf("               4 = Rejected from Server\n");
-			printf("               5 = You have been blocked by the GM Team\n");
-			printf("               6 = Your Game's EXE file is not the latest version\n");
-			printf("               7 = You are Prohibited to log in until...\n");
-			printf("               8 = Server is jammed due to over populated\n");
-			printf("               9 = No MSG\n");
-			printf("               100 = This ID has been totally erased\n");
-			printf("               all other values are 'No MSG', then use state 9 please.\n");
-			printf("  'error_message_#7': message of the code error 6\n");
-			printf("                      = Your are Prohibited to log in until... (packet 0x006a)\n");
-		} else if (strcmp(command, "timeadd") == 0) {
-			printf("timeadd <account_name> <modifier>\n");
-			printf("  Adds or substracts time from the validity limit of an account.\n");
-			printf("  Modifier is done as follows:\n");
-			printf("    Adjustment value (-1, 1, +1, etc...)\n");
-			printf("    Modified element:\n");
-			printf("      a or y: year\n");
-			printf("      m:  month\n");
-			printf("      j or d: day\n");
-			printf("      h:  hour\n");
-			printf("      mn: minute\n");
-			printf("      s:  second\n");
-			printf("  <example> timeadd testname +1m-2mn1s-6y\n");
-			printf("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
-			printf("            and 6 years at the same time.\n");
-			printf("NOTE: You can not modify a unlimited validity limit.\n");
-			printf("      If you want modify it, you want probably create a limited validity limit.\n");
-			printf("      So, at first, you must set the validity limit to a date/time.\n");
-		} else if (strcmp(command, "timeadd") == 0) {
-			printf("timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-			printf("  Changes the validity limit of an account.\n");
-			printf("  Default time [hh:mm:ss]: 23:59:59.\n");
-			printf("timeset <account_name> 0\n");
-			printf("  Gives an unlimited validity limit (0 = unlimited).\n");
-		} else if (strcmp(command, "unban") == 0) {
-			printf("unban/unbanish <account name>\n");
-			printf("  Remove the banishment of an account.\n");
-			printf("  This command works like banset <account_name> 0.\n");
-		} else if (strcmp(command, "unblock") == 0) {
-			printf("unblock <account name>\n");
-			printf("  Set state 0 (Account ok) to an account.\n");
-			printf("  This command works like state <account_name> 0.\n");
-		} else if (strcmp(command, "version") == 0) {
-			printf("version\n");
-			printf("  Display the version of the login-server.\n");
-		} else if (strcmp(command, "who") == 0) {
-			printf("who <account name>\n");
-			printf("  Displays complete information of an account.\n");
-// quit
-		} else if (strcmp(command, "quit") == 0 ||
-		           strcmp(command, "exit") == 0 ||
-		           strcmp(command, "end") == 0) {
-			printf("quit/end/exit\n");
-			printf("  End of the program of administration.\n");
-// unknown command
-		} else {
-			if (strlen(command) > 0)
-				printf("Unknown command [%s] for help. Displaying of all commands.\n", command);
-			printf(" aide/help/?                          -- Display this help\n");
-			printf(" aide/help/? [command]                -- Display the help of the command\n");
-			printf(" add <account_name> <sex> <password>  -- Create an account with default email\n");
-			printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name> -- Change final date of a ban\n");
-			printf(" banadd/ba <account_name> <modifier>  -- Add or substract time from the final\n");
-			printf("   example: ba apple +1m-2mn1s-2y        date of a banishment of an account\n");
-			printf(" banset/bs <account_name> yyyy/mm/dd [hh:mm:ss] -- Change final date of a ban\n");
-			printf(" banset/bs <account_name> 0           -- Un-banish an account\n");
-			printf(" block <account name>     -- Set state 5 (blocked by the GM Team) to an account\n");
-			printf(" check <account_name> <password>      -- Check the validity of a password\n");
-			printf(" create <account_name> <sex> <email> <passwrd> -- Create an account with email\n");
-			printf(" del <account name>                   -- Remove an account\n");
-			printf(" email <account_name> <email>         -- Modify an email of an account\n");
-			printf(" getcount                             -- Give the number of players online\n");
-			printf(" gm <account_name> [GM_level]         -- Modify the GM level of an account\n");
-			printf(" id <account name>                    -- Give the id of an account\n");
-			printf(" info <account_id>                    -- Display all information of an account\n");
-			printf(" kami <message>                       -- Sends a broadcast message (in yellow)\n");
-			printf(" kamib <message>                      -- Sends a broadcast message (in blue)\n");
-			printf(" language <language>                  -- Change the language of displaying.\n");
-			printf(" list/ls [First_id [Last_id]]         -- Display a list of accounts\n");
-			printf(" listBan/lsBan [First_id [Last_id] ]  -- Display a list of accounts\n");
-			printf("                                         with state or banished\n");
-			printf(" listGM/lsGM [First_id [Last_id]]     -- Display a list of GM accounts\n");
-			printf(" listOK/lsOK [First_id [Last_id] ]    -- Display a list of accounts\n");
-			printf("                                         without state and not banished\n");
-			printf(" memo <account_name> <memo>           -- Modify the memo of an account\n");
-			printf(" name <account_id>                    -- Give the name of an account\n");
-			printf(" passwd <account_name> <new_password> -- Change the password of an account\n");
-			printf(" quit/end/exit                        -- End of the program of administation\n");
-			printf(" reloadGM                             -- Reload GM configuration file\n");
-			printf(" search <expression>                  -- Seek accounts\n");
-//			printf(" search -e/-r/--expr/--regex <expressn> -- Seek accounts by regular-expression\n");
-			printf(" sex <nomcompte> <sexe>               -- Modify the sex of an account\n");
-			printf(" state <account_name> <new_state> <error_message_#7> -- Change the state\n");
-			printf(" timeadd/ta <account_name> <modifier> -- Add or substract time from the\n");
-			printf("   example: ta apple +1m-2mn1s-2y        validity limit of an account\n");
-			printf(" timeset/ts <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit\n");
-			printf(" timeset/ts <account_name> 0          -- Give a unlimited validity limit\n");
-			printf(" unban/unbanish <account name>        -- Remove the banishment of an account\n");
-			printf(" unblock <account name>               -- Set state 0 (Account ok) to an account\n");
-			printf(" version                              -- Gives the version of the login-server\n");
-			printf(" who <account name>                   -- Display all information of an account\n");
-			printf(" who <account name>                   -- Display all information of an account\n");
-			printf(" Note: To use spaces in an account name, type \"<account name>\" (or ').\n");
-		}
-	}
-}
-
-//-----------------------------
-// Sub-function: add an account
-//-----------------------------
-int addaccount(char* param, int emailflag) {
-	char name[1023], sex[1023], email[1023], password[1023];
-//	int i;
-
-	memset(name, '\0', sizeof(name));
-	memset(sex, '\0', sizeof(sex));
-	memset(email, '\0', sizeof(email));
-	memset(password, '\0', sizeof(password));
-
-	if (emailflag == 0) { // add command
-		if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, sex, password) < 2 && // password can be void
-		    sscanf(param, "'%[^']' %s %[^\r\n]", name, sex, password) < 2 && // password can be void
-		    sscanf(param, "%s %s %[^\r\n]", name, sex, password) < 2) { // password can be void
-			if (defaultlanguage == 'F') {
-				printf("Entrez un nom de compte, un sexe et un mot de passe svp.\n");
-				printf("<exemple> add nomtest Male motdepassetest\n");
-				ladmin_log("Nombre incorrect de paramètres pour créer un compte (commande 'add')." RETCODE);
-			} else {
-				printf("Please input an account name, a sex and a password.\n");
-				printf("<example> add testname Male testpass\n");
-				ladmin_log("Incomplete parameters to create an account ('add' command)." RETCODE);
-			}
-			return 136;
-		}
-		strcpy(email, "a@a.com"); // default email
-	} else { // 1: create command
-		if (sscanf(param, "\"%[^\"]\" %s %s %[^\r\n]", name, sex, email, password) < 3 && // password can be void
-		    sscanf(param, "'%[^']' %s %s %[^\r\n]", name, sex, email, password) < 3 && // password can be void
-		    sscanf(param, "%s %s %s %[^\r\n]", name, sex, email, password) < 3) { // password can be void
-			if (defaultlanguage == 'F') {
-				printf("Entrez un nom de compte, un sexe et un mot de passe svp.\n");
-				printf("<exemple> create nomtest Male mo@mail.com motdepassetest\n");
-				ladmin_log("Nombre incorrect de paramètres pour créer un compte (commande 'create')." RETCODE);
-			} else {
-				printf("Please input an account name, a sex and a password.\n");
-				printf("<example> create testname Male my@mail.com testpass\n");
-				ladmin_log("Incomplete parameters to create an account ('create' command)." RETCODE);
-			}
-			return 136;
-		}
-	}
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-/*	for(i = 0; name[i]; i++) {
-		if (strchr("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz-_", name[i]) == NULL) {
-			if (defaultlanguage == 'F') {
-				printf("Caractère interdit (%c) trouvé dans le nom du compte (%d%s caractère).\n", name[i], i+1, makeordinal(i+1));
-				ladmin_log("Caractère interdit (%c) trouvé dans le nom du compte (%d%s caractère)." RETCODE, name[i], i+1, makeordinal(i+1));
-			} else {
-				printf("Illegal character (%c) found in the account name (%d%s character).\n", name[i], i+1, makeordinal(i+1));
-				ladmin_log("Illegal character (%c) found in the account name (%d%s character)." RETCODE, name[i], i+1, makeordinal(i+1));
-			}
-			return 101;
-		}
-	}*/
-
-	sex[0] = toupper(sex[0]);
-	if (strchr("MF", sex[0]) == NULL) {
-		if (defaultlanguage == 'F') {
-			printf("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex);
-			ladmin_log("Sexe incorrect [%s]. Entrez M ou F svp." RETCODE, sex);
-		} else {
-			printf("Illegal gender [%s]. Please input M or F.\n", sex);
-			ladmin_log("Illegal gender [%s]. Please input M or F." RETCODE, sex);
-		}
-		return 103;
-	}
-
-	if (strlen(email) < 3) {
-		if (defaultlanguage == 'F') {
-			printf("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email);
-			ladmin_log("Email trop courte [%s]. Entrez une e-mail valide svp." RETCODE, email);
-		} else {
-			printf("Email is too short [%s]. Please input a valid e-mail.\n", email);
-			ladmin_log("Email is too short [%s]. Please input a valid e-mail." RETCODE, email);
-		}
-		return 109;
-	}
-	if (strlen(email) > 39) {
-		if (defaultlanguage == 'F') {
-			printf("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n", email);
-			ladmin_log("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp." RETCODE, email);
-		} else {
-			printf("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email);
-			ladmin_log("Email is too long [%s]. Please input an e-mail with 39 bytes at the most." RETCODE, email);
-		}
-		return 109;
-	}
-	if (e_mail_check(email) == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email);
-			ladmin_log("Email incorrecte [%s]. Entrez une e-mail valide svp." RETCODE, email);
-		} else {
-			printf("Invalid email [%s]. Please input a valid e-mail.\n", email);
-			ladmin_log("Invalid email [%s]. Please input a valid e-mail." RETCODE, email);
-		}
-		return 109;
-	}
-
-	if (strlen(password) == 0) {
-		if (typepasswd(password) == 0)
-			return 108;
-	}
-	if (verify_password(password) == 0)
-		return 104;
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour créer un compte." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to create an account." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7930;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	memcpy(WFIFOP(login_fd,26), password, 24);
-	WFIFOB(login_fd,50) = sex[0];
-	memcpy(WFIFOP(login_fd,51), email, 40);
-	WFIFOSET(login_fd,91);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//---------------------------------------------------------------------------------
-// Sub-function: Add/substract time to the final date of a banishment of an account
-//---------------------------------------------------------------------------------
-int banaddaccount(char* param) {
-	char name[1023], modif[1023];
-	int year, month, day, hour, minute, second;
-	char * p_modif;
-	int value, i;
-
-	memset(name, '\0', sizeof(name));
-	memset(modif, '\0', sizeof(modif));
-	year = month = day = hour = minute = second = 0;
-
-	if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 &&
-	    sscanf(param, "'%[^']' %[^\r\n]", name, modif) < 2 &&
-	    sscanf(param, "%s %[^\r\n]", name, modif) < 2) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte et un modificateur svp.\n");
-			printf("  <exemple> banadd nomtest +1m-2mn1s-6y\n");
-			printf("            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
-			printf("            et 6 ans dans le même temps.\n");
-			ladmin_log("Nombre incorrect de paramètres pour modifier la fin de ban d'un compte (commande 'banadd')." RETCODE);
-		} else {
-			printf("Please input an account name and a modifier.\n");
-			printf("  <example>: banadd testname +1m-2mn1s-6y\n");
-			printf("             this example adds 1 month and 1 second, and substracts 2 minutes\n");
-			printf("             and 6 years at the same time.\n");
-			ladmin_log("Incomplete parameters to modify the ban date/time of an account ('banadd' command)." RETCODE);
-		}
-		return 136;
-	}
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	// lowercase for modif
-	for (i = 0; modif[i]; i++)
-		modif[i] = tolower(modif[i]);
-	p_modif = modif;
-	while (strlen(p_modif) > 0) {
-		value = atoi(p_modif);
-		if (value == 0) {
-			p_modif++;
-		} else {
-			if (p_modif[0] == '-' || p_modif[0] == '+')
-				p_modif++;
-			while (strlen(p_modif) > 0 && p_modif[0] >= '0' && p_modif[0] <= '9') {
-				p_modif++;
-			}
-			if (p_modif[0] == 's') {
-				second = value;
-				p_modif++;
-			} else if (p_modif[0] == 'm' && p_modif[1] == 'n') {
-				minute = value;
-				p_modif += 2;
-			} else if (p_modif[0] == 'h') {
-				hour = value;
-				p_modif++;
-			} else if (p_modif[0] == 'd' || p_modif[0] == 'j') {
-				day = value;
-				p_modif += 2;
-			} else if (p_modif[0] == 'm') {
-				month = value;
-				p_modif++;
-			} else if (p_modif[0] == 'y' || p_modif[0] == 'a') {
-				year = value;
-				p_modif++;
-			} else {
-				p_modif++;
-			}
-		}
-	}
-
-	if (defaultlanguage == 'F') {
-		printf(" année:   %d\n", year);
-		printf(" mois:    %d\n", month);
-		printf(" jour:    %d\n", day);
-		printf(" heure:   %d\n", hour);
-		printf(" minute:  %d\n", minute);
-		printf(" seconde: %d\n", second);
-	} else {
-		printf(" year:   %d\n", year);
-		printf(" month:  %d\n", month);
-		printf(" day:    %d\n", day);
-		printf(" hour:   %d\n", hour);
-		printf(" minute: %d\n", minute);
-		printf(" second: %d\n", second);
-	}
-
-	if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0 && second == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Vous devez entrer un ajustement avec cette commande, svp:\n");
-			printf("  Valeur d'ajustement (-1, 1, +1, etc...)\n");
-			printf("  Element modifié:\n");
-			printf("    a ou y: année\n");
-			printf("    m:      mois\n");
-			printf("    j ou d: jour\n");
-			printf("    h:      heure\n");
-			printf("    mn:     minute\n");
-			printf("    s:      seconde\n");
-			printf("  <exemple> banadd nomtest +1m-2mn1s-6y\n");
-			printf("            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
-			printf("            et 6 ans dans le même temps.\n");
-			ladmin_log("Aucun ajustement n'est pas un ajustement (commande 'banadd')." RETCODE);
-		} else {
-			printf("Please give an adjustment with this command:\n");
-			printf("  Adjustment value (-1, 1, +1, etc...)\n");
-			printf("  Modified element:\n");
-			printf("    a or y: year\n");
-			printf("    m: month\n");
-			printf("    j or d: day\n");
-			printf("    h: hour\n");
-			printf("    mn: minute\n");
-			printf("    s: second\n");
-			printf("  <example> banadd testname +1m-2mn1s-6y\n");
-			printf("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
-			printf("            and 6 years at the same time.\n");
-			ladmin_log("No adjustment isn't an adjustment ('banadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (year > 127 || year < -127) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement d'années correct (de -127 à 127), svp.\n");
-			ladmin_log("Ajustement de l'année hors norme (commande 'banadd')." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the years (from -127 to 127).\n");
-			ladmin_log("Abnormal adjustement for the year ('banadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (month > 255 || month < -255) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement de mois correct (de -255 à 255), svp.\n");
-			ladmin_log("Ajustement du mois hors norme (commande 'banadd')." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the months (from -255 to 255).\n");
-			ladmin_log("Abnormal adjustement for the month ('banadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (day > 32767 || day < -32767) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n");
-			ladmin_log("Ajustement des jours hors norme (commande 'banadd')." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the days (from -32767 to 32767).\n");
-			ladmin_log("Abnormal adjustement for the days ('banadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (hour > 32767 || hour < -32767) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n");
-			ladmin_log("Ajustement des heures hors norme (commande 'banadd')." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the hours (from -32767 to 32767).\n");
-			ladmin_log("Abnormal adjustement for the hours ('banadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (minute > 32767 || minute < -32767) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n");
-			ladmin_log("Ajustement des minutes hors norme (commande 'banadd')." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the minutes (from -32767 to 32767).\n");
-			ladmin_log("Abnormal adjustement for the minutes ('banadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (second > 32767 || second < -32767) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n");
-			ladmin_log("Ajustement des secondes hors norme (commande 'banadd')." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the seconds (from -32767 to 32767).\n");
-			ladmin_log("Abnormal adjustement for the seconds ('banadd' command)." RETCODE);
-		}
-		return 137;
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour modifier la date d'un bannissement." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to modify a ban date/time." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x794c;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	WFIFOW(login_fd,26) = (short)year;
-	WFIFOW(login_fd,28) = (short)month;
-	WFIFOW(login_fd,30) = (short)day;
-	WFIFOW(login_fd,32) = (short)hour;
-	WFIFOW(login_fd,34) = (short)minute;
-	WFIFOW(login_fd,36) = (short)second;
-	WFIFOSET(login_fd,38);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//-----------------------------------------------------------------------
-// Sub-function of sub-function banaccount, unbanaccount or bansetaccount
-// Set the final date of a banishment of an account
-//-----------------------------------------------------------------------
-int bansetaccountsub(char* name, char* date, char* time) {
-	int year, month, day, hour, minute, second;
-	time_t ban_until_time; // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban)
-	struct tm *tmtime;
-
-	year = month = day = hour = minute = second = 0;
-	ban_until_time = 0;
-	tmtime = localtime(&ban_until_time); // initialize
-
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	if (atoi(date) != 0 &&
-	    ((sscanf(date, "%d/%d/%d", &year, &month, &day) < 3 &&
-	      sscanf(date, "%d-%d-%d", &year, &month, &day) < 3 &&
-	      sscanf(date, "%d.%d.%d", &year, &month, &day) < 3) ||
-	     sscanf(time, "%d:%d:%d", &hour, &minute, &second) < 3)) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n");
-			printf("Vous pouvez aussi mettre 0 à la place si vous utilisez la commande 'banset'.\n");
-			ladmin_log("Format incorrect pour la date/heure (commande'banset' ou 'ban')." RETCODE);
-		} else {
-			printf("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n");
-			printf("You can imput 0 instead of if you use 'banset' command.\n");
-			ladmin_log("Invalid format for the date/time ('banset' or 'ban' command)." RETCODE);
-		}
-		return 102;
-	}
-
-	if (atoi(date) == 0) {
-		ban_until_time = 0;
-	} else {
-		if (year < 70) {
-			year = year + 100;
-		}
-		if (year >= 1900) {
-			year = year - 1900;
-		}
-		if (month < 1 || month > 12) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez un mois correct svp (entre 1 et 12).\n");
-				ladmin_log("Mois incorrect pour la date (command 'banset' ou 'ban')." RETCODE);
-			} else {
-				printf("Please give a correct value for the month (from 1 to 12).\n");
-				ladmin_log("Invalid month for the date ('banset' or 'ban' command)." RETCODE);
-			}
-			return 102;
-		}
-		month = month - 1;
-		if (day < 1 || day > 31) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez un jour correct svp (entre 1 et 31).\n");
-				ladmin_log("Jour incorrect pour la date (command 'banset' ou 'ban')." RETCODE);
-			} else {
-				printf("Please give a correct value for the day (from 1 to 31).\n");
-				ladmin_log("Invalid day for the date ('banset' or 'ban' command)." RETCODE);
-			}
-			return 102;
-		}
-		if (((month == 3 || month == 5 || month == 8 || month == 10) && day > 30) ||
-		    (month == 1 && day > 29)) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez un jour correct en fonction du mois (%d) svp.\n", month);
-				ladmin_log("Jour incorrect pour ce mois correspondant (command 'banset' ou 'ban')." RETCODE);
-			} else {
-				printf("Please give a correct value for a day of this month (%d).\n", month);
-				ladmin_log("Invalid day for this month ('banset' or 'ban' command)." RETCODE);
-			}
-			return 102;
-		}
-		if (hour < 0 || hour > 23) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez une heure correcte svp (entre 0 et 23).\n");
-				ladmin_log("Heure incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE);
-			} else {
-				printf("Please give a correct value for the hour (from 0 to 23).\n");
-				ladmin_log("Invalid hour for the time ('banset' or 'ban' command)." RETCODE);
-			}
-			return 102;
-		}
-		if (minute < 0 || minute > 59) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez des minutes correctes svp (entre 0 et 59).\n");
-				ladmin_log("Minute incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE);
-			} else {
-				printf("Please give a correct value for the minutes (from 0 to 59).\n");
-				ladmin_log("Invalid minute for the time ('banset' or 'ban' command)." RETCODE);
-			}
-			return 102;
-		}
-		if (second < 0 || second > 59) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez des secondes correctes svp (entre 0 et 59).\n");
-				ladmin_log("Seconde incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE);
-			} else {
-				printf("Please give a correct value for the seconds (from 0 to 59).\n");
-				ladmin_log("Invalid second for the time ('banset' or 'ban' command)." RETCODE);
-			}
-			return 102;
-		}
-		tmtime->tm_year = year;
-		tmtime->tm_mon = month;
-		tmtime->tm_mday = day;
-		tmtime->tm_hour = hour;
-		tmtime->tm_min = minute;
-		tmtime->tm_sec = second;
-		tmtime->tm_isdst = -1; // -1: no winter/summer time modification
-		ban_until_time = mktime(tmtime);
-		if (ban_until_time == -1) {
-			if (defaultlanguage == 'F') {
-				printf("Date incorrecte.\n");
-				printf("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n");
-				printf("Vous pouvez aussi mettre 0 à la place si vous utilisez la commande 'banset'.\n");
-				ladmin_log("Date incorrecte. (command 'banset' ou 'ban')." RETCODE);
-			} else {
-				printf("Invalid date.\n");
-				printf("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n");
-				printf("You can imput 0 instead of if you use 'banset' command.\n");
-				ladmin_log("Invalid date. ('banset' or 'ban' command)." RETCODE);
-			}
-			return 102;
-		}
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour fixer un ban." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to set a ban." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x794a;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	WFIFOL(login_fd,26) = (int)ban_until_time;
-	WFIFOSET(login_fd,30);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//---------------------------------------------------------------------
-// Sub-function: Set the final date of a banishment of an account (ban)
-//---------------------------------------------------------------------
-int banaccount(char* param) {
-	char name[1023], date[1023], time[1023];
-
-	memset(name, '\0', sizeof(name));
-	memset(date, '\0', sizeof(date));
-	memset(time, '\0', sizeof(time));
-
-	if (sscanf(param, "%s %s \"%[^\"]\"", date, time, name) < 3 &&
-	    sscanf(param, "%s %s '%[^']'", date, time, name) < 3 &&
-	    sscanf(param, "%s %s %[^\r\n]", date, time, name) < 3) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte, une date et une heure svp.\n");
-			printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
-			printf("           banset <nom_du_compte> 0    (0 = dé-bani)\n");
-			printf("           ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n");
-			printf("           unban/unbanish <nom du compte>\n");
-			printf("           Heure par défaut [hh:mm:ss]: 23:59:59.\n");
-			ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'banset' ou 'ban')." RETCODE);
-		} else {
-			printf("Please input an account name, a date and a hour.\n");
-			printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-			printf("           banset <account_name> 0   (0 = un-banished)\n");
-			printf("           ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
-			printf("           unban/unbanish <account name>\n");
-			printf("           Default time [hh:mm:ss]: 23:59:59.\n");
-			ladmin_log("Incomplete parameters to set a ban ('banset' or 'ban' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	return bansetaccountsub(name, date, time);
-}
-
-//------------------------------------------------------------------------
-// Sub-function: Set the final date of a banishment of an account (banset)
-//------------------------------------------------------------------------
-int bansetaccount(char* param) {
-	char name[1023], date[1023], time[1023];
-
-	memset(name, '\0', sizeof(name));
-	memset(date, '\0', sizeof(date));
-	memset(time, '\0', sizeof(time));
-
-	if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void
-	    sscanf(param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void
-	    sscanf(param, "%s %s %[^\r\n]", name, date, time) < 2) { // if date = 0, time can be void
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte, une date et une heure svp.\n");
-			printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
-			printf("           banset <nom_du_compte> 0    (0 = dé-bani)\n");
-			printf("           ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n");
-			printf("           unban/unbanish <nom du compte>\n");
-			printf("           Heure par défaut [hh:mm:ss]: 23:59:59.\n");
-			ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'banset' ou 'ban')." RETCODE);
-		} else {
-			printf("Please input an account name, a date and a hour.\n");
-			printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-			printf("           banset <account_name> 0   (0 = un-banished)\n");
-			printf("           ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
-			printf("           unban/unbanish <account name>\n");
-			printf("           Default time [hh:mm:ss]: 23:59:59.\n");
-			ladmin_log("Incomplete parameters to set a ban ('banset' or 'ban' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	if (time[0] == '\0')
-		strcpy(time, "23:59:59");
-
-	return bansetaccountsub(name, date, time);
-}
-
-//-------------------------------------------------
-// Sub-function: unbanishment of an account (unban)
-//-------------------------------------------------
-int unbanaccount(char* param) {
-	char name[1023];
-
-	memset(name, '\0', sizeof(name));
-
-	if (strlen(param) == 0 ||
-	    (sscanf(param, "\"%[^\"]\"", name) < 1 &&
-	     sscanf(param, "'%[^']'", name) < 1 &&
-	     sscanf(param, "%[^\r\n]", name) < 1) ||
-	     strlen(name) == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte svp.\n");
-			printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
-			printf("           banset <nom_du_compte> 0    (0 = dé-bani)\n");
-			printf("           ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n");
-			printf("           unban/unbanish <nom du compte>\n");
-			printf("           Heure par défaut [hh:mm:ss]: 23:59:59.\n");
-			ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'unban')." RETCODE);
-		} else {
-			printf("Please input an account name.\n");
-			printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-			printf("           banset <account_name> 0   (0 = un-banished)\n");
-			printf("           ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
-			printf("           unban/unbanish <account name>\n");
-			printf("           Default time [hh:mm:ss]: 23:59:59.\n");
-			ladmin_log("Incomplete parameters to set a ban ('unban' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	return bansetaccountsub(name, "0", "");
-}
-
-//---------------------------------------------------------
-// Sub-function: Asking to check the validity of a password
-// (Note: never send back a password with login-server!! security of passwords)
-//---------------------------------------------------------
-int checkaccount(char* param) {
-	char name[1023], password[1023];
-
-	memset(name, '\0', sizeof(name));
-	memset(password, '\0', sizeof(password));
-
-	if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 && // password can be void
-	    sscanf(param, "'%[^']' %[^\r\n]", name, password) < 1 && // password can be void
-	    sscanf(param, "%s %[^\r\n]", name, password) < 1) { // password can be void
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte svp.\n");
-			printf("<exemple> check testname motdepasse\n");
-			ladmin_log("Nombre incorrect de paramètres pour tester le mot d'un passe d'un compte (commande 'check')." RETCODE);
-		} else {
-			printf("Please input an account name.\n");
-			printf("<example> check testname password\n");
-			ladmin_log("Incomplete parameters to check the password of an account ('check' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	if (strlen(password) == 0) {
-		if (typepasswd(password) == 0)
-			return 134;
-	}
-	if (verify_password(password) == 0)
-		return 131;
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour test un mot de passe." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to check a password." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x793a;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	memcpy(WFIFOP(login_fd,26), password, 24);
-	WFIFOSET(login_fd,50);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//------------------------------------------------
-// Sub-function: Asking for deletion of an account
-//------------------------------------------------
-int delaccount(char* param) {
-	char name[1023];
-	char letter;
-	char confirm[1023];
-	int i;
-
-	memset(name, '\0', sizeof(name));
-
-	if (strlen(param) == 0 ||
-	    (sscanf(param, "\"%[^\"]\"", name) < 1 &&
-	     sscanf(param, "'%[^']'", name) < 1 &&
-	     sscanf(param, "%[^\r\n]", name) < 1) ||
-	     strlen(name) == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte svp.\n");
-			printf("<exemple> del nomtestasupprimer\n");
-			ladmin_log("Aucun nom donné pour supprimer un compte (commande 'delete')." RETCODE);
-		} else {
-			printf("Please input an account name.\n");
-			printf("<example> del testnametodelete\n");
-			ladmin_log("No name given to delete an account ('delete' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	memset(confirm, '\0', sizeof(confirm));
-	while ((confirm[0] != 'o' || defaultlanguage != 'F') && confirm[0] != 'n' && (confirm[0] != 'y' || defaultlanguage == 'F')) {
-		if (defaultlanguage == 'F')
-			printf("\033[1;36m ** Etes-vous vraiment sûr de vouloir SUPPRIMER le compte [$userid]? (o/n) > \033[0m");
-		else
-			printf("\033[1;36m ** Are you really sure to DELETE account [$userid]? (y/n) > \033[0m");
-		fflush(stdout);
-		memset(confirm, '\0', sizeof(confirm));
-		i = 0;
-		while ((letter = getchar()) != '\n')
-			confirm[i++] = letter;
-	}
-
-	if (confirm[0] == 'n') {
-		if (defaultlanguage == 'F') {
-			printf("Suppression annulée.\n");
-			ladmin_log("Suppression annulée par l'utilisateur (commande 'delete')." RETCODE);
-		} else {
-			printf("Deletion canceled.\n");
-			ladmin_log("Deletion canceled by user ('delete' command)." RETCODE);
-		}
-		return 121;
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour détruire un compte." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to delete an acount." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7932;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	WFIFOSET(login_fd,26);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//----------------------------------------------------------
-// Sub-function: Asking to modification of an account e-mail
-//----------------------------------------------------------
-int changeemail(char* param) {
-	char name[1023], email[1023];
-
-	memset(name, '\0', sizeof(name));
-	memset(email, '\0', sizeof(email));
-
-	if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, email) < 2 &&
-	    sscanf(param, "'%[^']' %[^\r\n]", name, email) < 2 &&
-	    sscanf(param, "%s %[^\r\n]", name, email) < 2) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte et une email svp.\n");
-			printf("<exemple> email testname nouveauemail\n");
-			ladmin_log("Nombre incorrect de paramètres pour changer l'email d'un compte (commande 'email')." RETCODE);
-		} else {
-			printf("Please input an account name and an email.\n");
-			printf("<example> email testname newemail\n");
-			ladmin_log("Incomplete parameters to change the email of an account ('email' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	if (strlen(email) < 3) {
-		if (defaultlanguage == 'F') {
-			printf("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email);
-			ladmin_log("Email trop courte [%s]. Entrez une e-mail valide svp." RETCODE, email);
-		} else {
-			printf("Email is too short [%s]. Please input a valid e-mail.\n", email);
-			ladmin_log("Email is too short [%s]. Please input a valid e-mail." RETCODE, email);
-		}
-		return 109;
-	}
-	if (strlen(email) > 39) {
-		if (defaultlanguage == 'F') {
-			printf("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n", email);
-			ladmin_log("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp." RETCODE, email);
-		} else {
-			printf("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email);
-			ladmin_log("Email is too long [%s]. Please input an e-mail with 39 bytes at the most." RETCODE, email);
-		}
-		return 109;
-	}
-	if (e_mail_check(email) == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email);
-			ladmin_log("Email incorrecte [%s]. Entrez une e-mail valide svp." RETCODE, email);
-		} else {
-			printf("Invalid email [%s]. Please input a valid e-mail.\n", email);
-			ladmin_log("Invalid email [%s]. Please input a valid e-mail." RETCODE, email);
-		}
-		return 109;
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour changer une email." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to change an email." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7940;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	memcpy(WFIFOP(login_fd,26), email, 40);
-	WFIFOSET(login_fd,66);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//-----------------------------------------------------
-// Sub-function: Asking of the number of online players
-//-----------------------------------------------------
-int getlogincount() {
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le nombre de joueurs en jeu." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to obtain the # of online players." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7938;
-	WFIFOSET(login_fd,2);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//----------------------------------------------------------
-// Sub-function: Asking to modify the GM level of an account
-//----------------------------------------------------------
-int changegmlevel(char* param) {
-	char name[1023];
-	int GM_level;
-
-	memset(name, '\0', sizeof(name));
-	GM_level = 0;
-
-	if (sscanf(param, "\"%[^\"]\" %d", name, &GM_level) < 1 &&
-	    sscanf(param, "'%[^']' %d", name, &GM_level) < 1 &&
-	    sscanf(param, "%s %d", name, &GM_level) < 1) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte et un niveau de GM svp.\n");
-			printf("<exemple> gm nomtest 80\n");
-			ladmin_log("Nombre incorrect de paramètres pour changer le Niveau de GM d'un compte (commande 'gm')." RETCODE);
-		} else {
-			printf("Please input an account name and a GM level.\n");
-			printf("<example> gm testname 80\n");
-			ladmin_log("Incomplete parameters to change the GM level of an account ('gm' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	if (GM_level < 0 || GM_level > 99) {
-		if (defaultlanguage == 'F') {
-			printf("Niveau de GM incorrect [%d]. Entrez une valeur de 0 à 99 svp.\n", GM_level);
-			ladmin_log("Niveau de GM incorrect [%d]. La valeur peut être de 0 à 99." RETCODE, GM_level);
-		} else {
-			printf("Illegal GM level [%d]. Please input a value from 0 to 99.\n", GM_level);
-			ladmin_log("Illegal GM level [%d]. The value can be from 0 to 99." RETCODE, GM_level);
-		}
-		return 103;
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour changer un niveau de GM." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to change a GM level." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x793e;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	WFIFOB(login_fd,26) = GM_level;
-	WFIFOSET(login_fd,27);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//---------------------------------------------
-// Sub-function: Asking to obtain an account id
-//---------------------------------------------
-int idaccount(char* param) {
-	char name[1023];
-
-	memset(name, '\0', sizeof(name));
-
-	if (strlen(param) == 0 ||
-	    (sscanf(param, "\"%[^\"]\"", name) < 1 &&
-	     sscanf(param, "'%[^']'", name) < 1 &&
-	     sscanf(param, "%[^\r\n]", name) < 1) ||
-	     strlen(name) == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte svp.\n");
-			printf("<exemple> id nomtest\n");
-			ladmin_log("Aucun nom donné pour rechecher l'id d'un compte (commande 'id')." RETCODE);
-		} else {
-			printf("Please input an account name.\n");
-			printf("<example> id testname\n");
-			ladmin_log("No name given to search an account id ('id' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour connaître l'id d'un compte." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to know an account id." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7944;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	WFIFOSET(login_fd,26);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//----------------------------------------------------------------------------
-// Sub-function: Asking to displaying information about an account (by its id)
-//----------------------------------------------------------------------------
-int infoaccount(int account_id) {
-	if (account_id < 0) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un id ayant une valeur positive svp.\n");
-			ladmin_log("Une valeur négative a été donné pour trouver le compte." RETCODE);
-		} else {
-			printf("Please input a positive value for the id.\n");
-			ladmin_log("Negative value was given to found the account." RETCODE);
-		}
-		return 136;
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le information d'un compte (par l'id)." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to obtain information about an account (by its id)." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7954;
-	WFIFOL(login_fd,2) = account_id;
-	WFIFOSET(login_fd,6);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//---------------------------------------
-// Sub-function: Send a broadcast message
-//---------------------------------------
-int sendbroadcast(short type, char* message) {
-	if (strlen(message) == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un message svp.\n");
-			if (type == 0) {
-				printf("<exemple> kami un message\n");
-			} else {
-				printf("<exemple> kamib un message\n");
-			}
-			ladmin_log("Le message est vide (commande 'kami(b)')." RETCODE);
-		} else {
-			printf("Please input a message.\n");
-			if (type == 0) {
-				printf("<example> kami a message\n");
-			} else {
-				printf("<example> kamib a message\n");
-			}
-			ladmin_log("The message is void ('kami(b)' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	WFIFOW(login_fd,0) = 0x794e;
-	WFIFOW(login_fd,2) = type;
-	WFIFOL(login_fd,4) = strlen(message)+1;
-	memcpy(WFIFOP(login_fd,8), message, strlen(message)+1);
-	WFIFOSET(login_fd,8+strlen(message)+1);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//--------------------------------------------
-// Sub-function: Change language of displaying
-//--------------------------------------------
-int changelanguage(char* language) {
-	if (strlen(language) == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez une langue svp.\n");
-			printf("<exemple> language english\n");
-			printf("          language français\n");
-			ladmin_log("La langue est vide (commande 'language')." RETCODE);
-		} else {
-			printf("Please input a language.\n");
-			printf("<example> language english\n");
-			printf("          language français\n");
-			ladmin_log("The language is void ('language' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	language[0] = toupper(language[0]);
-	if (language[0] == 'F' || language[0] == 'E') {
-		defaultlanguage = language[0];
-		if (defaultlanguage == 'F') {
-			printf("Changement de la langue d'affichage en Français.\n");
-			ladmin_log("Changement de la langue d'affichage en Français." RETCODE);
-		} else {
-			printf("Displaying language changed to English.\n");
-			ladmin_log("Displaying language changed to English." RETCODE);
-		}
-	} else {
-		if (defaultlanguage == 'F') {
-			printf("Langue non paramétrée (langues possibles: 'Français' ou 'English').\n");
-			ladmin_log("Langue non paramétrée (Français ou English nécessaire)." RETCODE);
-		} else {
-			printf("Undefined language (possible languages: Français or English).\n");
-			ladmin_log("Undefined language (must be Français or English)." RETCODE);
-		}
-	}
-
-	return 0;
-}
-
-//--------------------------------------------------------
-// Sub-function: Asking to Displaying of the accounts list
-//--------------------------------------------------------
-int listaccount(char* param, int type) {
-//int list_first, list_last, list_type; // parameter to display a list of accounts
-	int i;
-
-	list_type = type;
-
-	// set default values
-	list_first = 0;
-	list_last = 0;
-
-	if (list_type == 1) { // if listgm
-		// get all accounts = use default
-	} else if (list_type == 2) { // if search
-		for (i = 0; param[i]; i++)
-			param[i] = tolower(param[i]);
-		// get all accounts = use default
-	} else if (list_type == 3) { // if listban
-		// get all accounts = use default
-	} else if (list_type == 4) { // if listok
-		// get all accounts = use default
-	} else { // if list (list_type == 0)
-		switch(sscanf(param, "%d %d", &list_first, &list_last)) {
-		case 0:
-			// get all accounts = use default
-			break;
-		case 1:
-			list_last = 0;
-			// use tests of the following value
-		default:
-			if (list_first < 0)
-				list_first = 0;
-			if (list_last < list_first || list_last < 0)
-				list_last = 0;
-			break;
-		}
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour obtenir la liste des comptes de %d à %d." RETCODE, list_first, list_last);
-	} else {
-		ladmin_log("Request to login-server to obtain the list of accounts from %d to %d." RETCODE, list_first, list_last);
-	}
-
-	WFIFOW(login_fd,0) = 0x7920;
-	WFIFOL(login_fd,2) = list_first;
-	WFIFOL(login_fd,6) = list_last;
-	WFIFOSET(login_fd,10);
-	bytes_to_read = 1;
-
-	//          0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567
-	if (defaultlanguage == 'F') {
-		printf(" id_compte GM nom_utilisateur         sexe   count statut\n");
-	} else {
-		printf("account_id GM user_name               sex    count state\n");
-	}
-	printf("-------------------------------------------------------------------------------\n");
-	list_count = 0;
-
-	return 0;
-}
-
-//--------------------------------------------
-// Sub-function: Asking to modify a memo field
-//--------------------------------------------
-int changememo(char* param) {
-	char name[1023], memo[1023];
-
-	memset(name, '\0', sizeof(name));
-	memset(memo, '\0', sizeof(memo));
-
-	if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, memo) < 1 && // memo can be void
-	    sscanf(param, "'%[^']' %[^\r\n]", name, memo) < 1 && // memo can be void
-	    sscanf(param, "%s %[^\r\n]", name, memo) < 1) { // memo can be void
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte et un mémo svp.\n");
-			printf("<exemple> memo nomtest nouveau memo\n");
-			ladmin_log("Nombre incorrect de paramètres pour changer le mémo d'un compte (commande 'email')." RETCODE);
-		} else {
-			printf("Please input an account name and a memo.\n");
-			printf("<example> memo testname new memo\n");
-			ladmin_log("Incomplete parameters to change the memo of an account ('email' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	if (strlen(memo) > 254) {
-		if (defaultlanguage == 'F') {
-			printf("Mémo trop long (%d caractères).\n", strlen(memo));
-			printf("Entrez un mémo de 254 caractères maximum svp.\n");
-			ladmin_log("Mémo trop long (%d caractères). Entrez un mémo de 254 caractères maximum svp." RETCODE, strlen(memo));
-		} else {
-			printf("Memo is too long (%d characters).\n", strlen(memo));
-			printf("Please input a memo of 254 bytes at the maximum.\n");
-			ladmin_log("Email is too long (%d characters). Please input a memo of 254 bytes at the maximum." RETCODE, strlen(memo));
-		}
-		return 102;
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour changer un mémo." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to change a memo." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7942;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	WFIFOW(login_fd,26) = strlen(memo);
-	if (strlen(memo) > 0)
-		memcpy(WFIFOP(login_fd,28), memo, strlen(memo));
-	WFIFOSET(login_fd,28+strlen(memo));
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//-----------------------------------------------
-// Sub-function: Asking to obtain an account name
-//-----------------------------------------------
-int nameaccount(int id) {
-	if (id < 0) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un id ayant une valeur positive svp.\n");
-			ladmin_log("Id négatif donné pour rechecher le nom d'un compte (commande 'name')." RETCODE);
-		} else {
-			printf("Please input a positive value for the id.\n");
-			ladmin_log("Negativ id given to search an account name ('name' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	if (defaultlanguage == 'F')
-		ladmin_log("Envoi d'un requête au serveur de logins pour connaître le nom d'un compte." RETCODE);
-	else
-		ladmin_log("Request to login-server to know an account name." RETCODE);
-
-	WFIFOW(login_fd,0) = 0x7946;
-	WFIFOL(login_fd,2) = id;
-	WFIFOSET(login_fd,6);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//------------------------------------------
-// Sub-function: Asking to modify a password
-// (Note: never send back a password with login-server!! security of passwords)
-//------------------------------------------
-int changepasswd(char* param) {
-	char name[1023], password[1023];
-
-	memset(name, '\0', sizeof(name));
-	memset(password, '\0', sizeof(password));
-
-	if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 &&
-	    sscanf(param, "'%[^']' %[^\r\n]", name, password) < 1 &&
-	    sscanf(param, "%s %[^\r\n]", name, password) < 1) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte svp.\n");
-			printf("<exemple> passwd nomtest nouveaumotdepasse\n");
-			ladmin_log("Nombre incorrect de paramètres pour changer le mot d'un passe d'un compte (commande 'password')." RETCODE);
-		} else {
-			printf("Please input an account name.\n");
-			printf("<example> passwd testname newpassword\n");
-			ladmin_log("Incomplete parameters to change the password of an account ('password' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	if (strlen(password) == 0) {
-		if (typepasswd(password) == 0)
-			return 134;
-	}
-	if (verify_password(password) == 0)
-		return 131;
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour changer un mot de passe." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to change a password." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7934;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	memcpy(WFIFOP(login_fd,26), password, 24);
-	WFIFOSET(login_fd,50);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//----------------------------------------------------------------------
-// Sub-function: Request to login-server to reload GM configuration file
-// this function have no answer
-//----------------------------------------------------------------------
-int reloadGM() {
-	WFIFOW(login_fd,0) = 0x7955;
-	WFIFOSET(login_fd,2);
-	bytes_to_read = 0;
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Demande de recharger le fichier de configuration des GM envoyée." RETCODE);
-		printf("Demande de recharger le fichier de configuration des GM envoyée.\n");
-		printf("Vérifiez les comptes GM actuels (après rechargement):\n");
-	} else {
-		ladmin_log("Request to reload the GM configuration file sended." RETCODE);
-		printf("Request to reload the GM configuration file sended.\n");
-		printf("Check the actual GM accounts (after reloading):\n");
-	}
-	listaccount(parameters, 1); // 1: to list only GM
-
-	return 180;
-}
-
-//-----------------------------------------------------
-// Sub-function: Asking to modify the sex of an account
-//-----------------------------------------------------
-int changesex(char* param) {
-	char name[1023], sex[1023];
-
-	memset(name, '\0', sizeof(name));
-	memset(sex, '\0', sizeof(sex));
-
-	if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, sex) < 2 &&
-	    sscanf(param, "'%[^']' %[^\r\n]", name, sex) < 2 &&
-	    sscanf(param, "%s %[^\r\n]", name, sex) < 2) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte et un sexe svp.\n");
-			printf("<exemple> sex nomtest Male\n");
-			ladmin_log("Nombre incorrect de paramètres pour changer le sexe d'un compte (commande 'sex')." RETCODE);
-		} else {
-			printf("Please input an account name and a sex.\n");
-			printf("<example> sex testname Male\n");
-			ladmin_log("Incomplete parameters to change the sex of an account ('sex' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	sex[0] = toupper(sex[0]);
-	if (strchr("MF", sex[0]) == NULL) {
-		if (defaultlanguage == 'F') {
-			printf("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex);
-			ladmin_log("Sexe incorrect [%s]. Entrez M ou F svp." RETCODE, sex);
-		} else {
-			printf("Illegal gender [%s]. Please input M or F.\n", sex);
-			ladmin_log("Illegal gender [%s]. Please input M or F." RETCODE, sex);
-		}
-		return 103;
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour changer un sexe." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to change a sex." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x793c;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	WFIFOB(login_fd,26) = sex[0];
-	WFIFOSET(login_fd,27);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//-------------------------------------------------------------------------
-// Sub-function of sub-function changestate, blockaccount or unblockaccount
-// Asking to modify the state of an account
-//-------------------------------------------------------------------------
-int changestatesub(char* name, int state, char* error_message7) {
-	char error_message[1023]; // need to use, because we can modify error_message7
-
-	memset(error_message, '\0', sizeof(error_message));
-	strncpy(error_message, error_message7, sizeof(error_message)-1);
-
-	if ((state < 0 || state > 9) && state != 100) { // Valid values: 0: ok, or value of the 0x006a packet + 1
-		if (defaultlanguage == 'F') {
-			printf("Entrez une des statuts suivantes svp:\n");
-			printf("  0 = Compte ok             6 = Your Game's EXE file is not the latest version\n");
-		} else {
-			printf("Please input one of these states:\n");
-			printf("  0 = Account ok            6 = Your Game's EXE file is not the latest version\n");
-		}
-		printf("  1 = Unregistered ID       7 = You are Prohibited to log in until + message\n");
-		printf("  2 = Incorrect Password    8 = Server is jammed due to over populated\n");
-		printf("  3 = This ID is expired    9 = No MSG\n");
-		printf("  4 = Rejected from Server  100 = This ID has been totally erased\n");
-		printf("  5 = You have been blocked by the GM Team\n");
-		if (defaultlanguage == 'F') {
-			printf("<exemples> state nomtest 5\n");
-			printf("           state nomtest 7 fin de votre ban\n");
-			printf("           block <nom compte>\n");
-			printf("           unblock <nom compte>\n");
-			ladmin_log("Valeur incorrecte pour le statut d'un compte (commande 'state', 'block' ou 'unblock')." RETCODE);
-		} else {
-			printf("<examples> state testname 5\n");
-			printf("           state testname 7 end of your ban\n");
-			printf("           block <account name>\n");
-			printf("           unblock <account name>\n");
-			ladmin_log("Invalid value for the state of an account ('state', 'block' or 'unblock' command)." RETCODE);
-		}
-		return 151;
-	}
-
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	if (state != 7) {
-		strcpy(error_message, "-");
-	} else {
-		if (strlen(error_message) < 1) {
-			if (defaultlanguage == 'F') {
-				printf("Message d'erreur trop court. Entrez un message de 1-19 caractères.\n");
-				ladmin_log("Message d'erreur trop court. Entrez un message de 1-19 caractères." RETCODE);
-			} else {
-				printf("Error message is too short. Please input a message of 1-19 bytes.\n");
-				ladmin_log("Error message is too short. Please input a message of 1-19 bytes." RETCODE);
-			}
-			return 102;
-		}
-		if (strlen(error_message) > 19) {
-			if (defaultlanguage == 'F') {
-				printf("Message d'erreur trop long. Entrez un message de 1-19 caractères.\n");
-				ladmin_log("Message d'erreur trop long. Entrez un message de 1-19 caractères." RETCODE);
-			} else {
-				printf("Error message is too long. Please input a message of 1-19 bytes.\n");
-				ladmin_log("Error message is too long. Please input a message of 1-19 bytes." RETCODE);
-			}
-			return 102;
-		}
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour changer un statut." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to change a state." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7936;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	WFIFOL(login_fd,26) = state;
-	memcpy(WFIFOP(login_fd,30), error_message, 20);
-	WFIFOSET(login_fd,50);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//-------------------------------------------------------
-// Sub-function: Asking to modify the state of an account
-//-------------------------------------------------------
-int changestate(char* param) {
-	char name[1023], error_message[1023];
-	int state;
-
-	memset(name, '\0', sizeof(name));
-	memset(error_message, '\0', sizeof(error_message));
-
-	if (sscanf(param, "\"%[^\"]\" %d %[^\r\n]", name, &state, error_message) < 2 &&
-	    sscanf(param, "'%[^']' %d %[^\r\n]", name, &state, error_message) < 2 &&
-	    sscanf(param, "%s %d %[^\r\n]", name, &state, error_message) < 2) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte et un statut svp.\n");
-			printf("<exemples> state nomtest 5\n");
-			printf("           state nomtest 7 fin de votre ban\n");
-			printf("           block <nom compte>\n");
-			printf("           unblock <nom compte>\n");
-			ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'state')." RETCODE);
-		} else {
-			printf("Please input an account name and a state.\n");
-			printf("<examples> state testname 5\n");
-			printf("           state testname 7 end of your ban\n");
-			printf("           block <account name>\n");
-			printf("           unblock <account name>\n");
-			ladmin_log("Incomplete parameters to change the state of an account ('state' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	return changestatesub(name, state, error_message);
-}
-
-//-------------------------------------------
-// Sub-function: Asking to unblock an account
-//-------------------------------------------
-int unblockaccount(char* param) {
-	char name[1023];
-
-	memset(name, '\0', sizeof(name));
-
-	if (strlen(param) == 0 ||
-	    (sscanf(param, "\"%[^\"]\"", name) < 1 &&
-	     sscanf(param, "'%[^']'", name) < 1 &&
-	     sscanf(param, "%[^\r\n]", name) < 1) ||
-	     strlen(name) == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte svp.\n");
-			printf("<exemples> state nomtest 5\n");
-			printf("           state nomtest 7 fin de votre ban\n");
-			printf("           block <nom compte>\n");
-			printf("           unblock <nom compte>\n");
-			ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'unblock')." RETCODE);
-		} else {
-			printf("Please input an account name.\n");
-			printf("<examples> state testname 5\n");
-			printf("           state testname 7 end of your ban\n");
-			printf("           block <account name>\n");
-			printf("           unblock <account name>\n");
-			ladmin_log("Incomplete parameters to change the state of an account ('unblock' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	return changestatesub(name, 0, "-"); // state 0, no error message
-}
-
-//-------------------------------------------
-// Sub-function: Asking to unblock an account
-//-------------------------------------------
-int blockaccount(char* param) {
-	char name[1023];
-
-	memset(name, '\0', sizeof(name));
-
-	if (strlen(param) == 0 ||
-	    (sscanf(param, "\"%[^\"]\"", name) < 1 &&
-	     sscanf(param, "'%[^']'", name) < 1 &&
-	     sscanf(param, "%[^\r\n]", name) < 1) ||
-	     strlen(name) == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte svp.\n");
-			printf("<exemples> state nomtest 5\n");
-			printf("           state nomtest 7 fin de votre ban\n");
-			printf("           block <nom compte>\n");
-			printf("           unblock <nom compte>\n");
-			ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'block')." RETCODE);
-		} else {
-			printf("Please input an account name.\n");
-			printf("<examples> state testname 5\n");
-			printf("           state testname 7 end of your ban\n");
-			printf("           block <account name>\n");
-			printf("           unblock <account name>\n");
-			ladmin_log("Incomplete parameters to change the state of an account ('block' command)." RETCODE);
-		}
-		return 136;
-	}
-
-	return changestatesub(name, 5, "-"); // state 5, no error message
-}
-
-//---------------------------------------------------------------------
-// Sub-function: Add/substract time to the validity limit of an account
-//---------------------------------------------------------------------
-int timeaddaccount(char* param) {
-	char name[1023], modif[1023];
-	int year, month, day, hour, minute, second;
-	char * p_modif;
-	int value, i;
-
-	memset(name, '\0', sizeof(name));
-	memset(modif, '\0', sizeof(modif));
-	year = month = day = hour = minute = second = 0;
-
-	if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 &&
-	    sscanf(param, "'%[^']' %[^\r\n]", name, modif) < 2 &&
-	    sscanf(param, "%s %[^\r\n]", name, modif) < 2) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte et un modificateur svp.\n");
-			printf("  <exemple> timeadd nomtest +1m-2mn1s-6y\n");
-			printf("            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
-			printf("            et 6 ans dans le même temps.\n");
-			ladmin_log("Nombre incorrect de paramètres pour modifier une date limite d'utilisation (commande 'timeadd')." RETCODE);
-		} else {
-			printf("Please input an account name and a modifier.\n");
-			printf("  <example>: timeadd testname +1m-2mn1s-6y\n");
-			printf("             this example adds 1 month and 1 second, and substracts 2 minutes\n");
-			printf("             and 6 years at the same time.\n");
-			ladmin_log("Incomplete parameters to modify a limit time ('timeadd' command)." RETCODE);
-		}
-		return 136;
-	}
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	// lowercase for modif
-	for (i = 0; modif[i]; i++)
-		modif[i] = tolower(modif[i]);
-	p_modif = modif;
-	while (strlen(p_modif) > 0) {
-		value = atoi(p_modif);
-		if (value == 0) {
-			p_modif++;
-		} else {
-			if (p_modif[0] == '-' || p_modif[0] == '+')
-				p_modif++;
-			while (strlen(p_modif) > 0 && p_modif[0] >= '0' && p_modif[0] <= '9') {
-				p_modif++;
-			}
-			if (p_modif[0] == 's') {
-				second = value;
-				p_modif++;
-			} else if (p_modif[0] == 'm' && p_modif[1] == 'n') {
-				minute = value;
-				p_modif += 2;
-			} else if (p_modif[0] == 'h') {
-				hour = value;
-				p_modif++;
-			} else if (p_modif[0] == 'd' || p_modif[0] == 'j') {
-				day = value;
-				p_modif += 2;
-			} else if (p_modif[0] == 'm') {
-				month = value;
-				p_modif++;
-			} else if (p_modif[0] == 'y' || p_modif[0] == 'a') {
-				year = value;
-				p_modif++;
-			} else {
-				p_modif++;
-			}
-		}
-	}
-
-	if (defaultlanguage == 'F') {
-		printf(" année:   %d\n", year);
-		printf(" mois:    %d\n", month);
-		printf(" jour:    %d\n", day);
-		printf(" heure:   %d\n", hour);
-		printf(" minute:  %d\n", minute);
-		printf(" seconde: %d\n", second);
-	} else {
-		printf(" year:   %d\n", year);
-		printf(" month:  %d\n", month);
-		printf(" day:    %d\n", day);
-		printf(" hour:   %d\n", hour);
-		printf(" minute: %d\n", minute);
-		printf(" second: %d\n", second);
-	}
-
-	if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0 && second == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Vous devez entrer un ajustement avec cette commande, svp:\n");
-			printf("  Valeur d'ajustement (-1, 1, +1, etc...)\n");
-			printf("  Elément modifié:\n");
-			printf("    a ou y: année\n");
-			printf("    m:      mois\n");
-			printf("    j ou d: jour\n");
-			printf("    h:      heure\n");
-			printf("    mn:     minute\n");
-			printf("    s:      seconde\n");
-			printf("  <exemple> timeadd nomtest +1m-2mn1s-6y\n");
-			printf("            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
-			printf("            et 6 ans dans le même temps.\n");
-			ladmin_log("Aucun ajustement n'est pas un ajustement (commande 'timeadd')." RETCODE);
-		} else {
-			printf("Please give an adjustment with this command:\n");
-			printf("  Adjustment value (-1, 1, +1, etc...)\n");
-			printf("  Modified element:\n");
-			printf("    a or y: year\n");
-			printf("    m:      month\n");
-			printf("    j or d: day\n");
-			printf("    h:      hour\n");
-			printf("    mn:     minute\n");
-			printf("    s:      second\n");
-			printf("  <example> timeadd testname +1m-2mn1s-6y\n");
-			printf("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
-			printf("            and 6 years at the same time.\n");
-			ladmin_log("No adjustment isn't an adjustment ('timeadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (year > 127 || year < -127) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement d'années correct (de -127 à 127), svp.\n");
-			ladmin_log("Ajustement de l'année hors norme ('timeadd' command)." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the years (from -127 to 127).\n");
-			ladmin_log("Abnormal adjustement for the year ('timeadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (month > 255 || month < -255) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement de mois correct (de -255 à 255), svp.\n");
-			ladmin_log("Ajustement du mois hors norme ('timeadd' command)." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the months (from -255 to 255).\n");
-			ladmin_log("Abnormal adjustement for the month ('timeadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (day > 32767 || day < -32767) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n");
-			ladmin_log("Ajustement des jours hors norme ('timeadd' command)." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the days (from -32767 to 32767).\n");
-			ladmin_log("Abnormal adjustement for the days ('timeadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (hour > 32767 || hour < -32767) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n");
-			ladmin_log("Ajustement des heures hors norme ('timeadd' command)." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the hours (from -32767 to 32767).\n");
-			ladmin_log("Abnormal adjustement for the hours ('timeadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (minute > 32767 || minute < -32767) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n");
-			ladmin_log("Ajustement des minutes hors norme ('timeadd' command)." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the minutes (from -32767 to 32767).\n");
-			ladmin_log("Abnormal adjustement for the minutes ('timeadd' command)." RETCODE);
-		}
-		return 137;
-	}
-	if (second > 32767 || second < -32767) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n");
-			ladmin_log("Ajustement des secondes hors norme ('timeadd' command)." RETCODE);
-		} else {
-			printf("Please give a correct adjustment for the seconds (from -32767 to 32767).\n");
-			ladmin_log("Abnormal adjustement for the seconds ('timeadd' command)." RETCODE);
-		}
-		return 137;
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour modifier une date limite d'utilisation." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to modify a time limit." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7950;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	WFIFOW(login_fd,26) = (short)year;
-	WFIFOW(login_fd,28) = (short)month;
-	WFIFOW(login_fd,30) = (short)day;
-	WFIFOW(login_fd,32) = (short)hour;
-	WFIFOW(login_fd,34) = (short)minute;
-	WFIFOW(login_fd,36) = (short)second;
-	WFIFOSET(login_fd,38);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//-------------------------------------------------
-// Sub-function: Set a validity limit of an account
-//-------------------------------------------------
-int timesetaccount(char* param) {
-	char name[1023], date[1023], time[1023];
-	int year, month, day, hour, minute, second;
-	time_t connect_until_time; // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited)
-	struct tm *tmtime;
-
-	memset(name, '\0', sizeof(name));
-	memset(date, '\0', sizeof(date));
-	memset(time, '\0', sizeof(time));
-	year = month = day = hour = minute = second = 0;
-	connect_until_time = 0;
-	tmtime = localtime(&connect_until_time); // initialize
-
-	if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void
-	    sscanf(param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void
-	    sscanf(param, "%s %s %[^\r\n]", name, date, time) < 2) { // if date = 0, time can be void
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte, une date et une heure svp.\n");
-			printf("<exemple>: timeset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
-			printf("           timeset <nom_du_compte> 0    (0 = illimité)\n");
-			printf("           Heure par défaut [hh:mm:ss]: 23:59:59.\n");
-			ladmin_log("Nombre incorrect de paramètres pour fixer une date limite d'utilisation (commande 'timeset')." RETCODE);
-		} else {
-			printf("Please input an account name, a date and a hour.\n");
-			printf("<example>: timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
-			printf("           timeset <account_name> 0   (0 = unlimited)\n");
-			printf("           Default time [hh:mm:ss]: 23:59:59.\n");
-			ladmin_log("Incomplete parameters to set a limit time ('timeset' command)." RETCODE);
-		}
-		return 136;
-	}
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	if (time[0] == '\0')
-		strcpy(time, "23:59:59");
-
-	if (atoi(date) != 0 &&
-	    ((sscanf(date, "%d/%d/%d", &year, &month, &day) < 3 &&
-	      sscanf(date, "%d-%d-%d", &year, &month, &day) < 3 &&
-	      sscanf(date, "%d.%d.%d", &year, &month, &day) < 3 &&
-	      sscanf(date, "%d'%d'%d", &year, &month, &day) < 3) ||
-	     sscanf(time, "%d:%d:%d", &hour, &minute, &second) < 3)) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n");
-			ladmin_log("Format incorrect pour la date/heure ('timeset' command)." RETCODE);
-		} else {
-			printf("Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n");
-			ladmin_log("Invalid format for the date/time ('timeset' command)." RETCODE);
-		}
-		return 102;
-	}
-
-	if (atoi(date) == 0) {
-		connect_until_time = 0;
-	} else {
-		if (year < 70) {
-			year = year + 100;
-		}
-		if (year >= 1900) {
-			year = year - 1900;
-		}
-		if (month < 1 || month > 12) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez un mois correct svp (entre 1 et 12).\n");
-				ladmin_log("Mois incorrect pour la date ('timeset' command)." RETCODE);
-			} else {
-				printf("Please give a correct value for the month (from 1 to 12).\n");
-				ladmin_log("Invalid month for the date ('timeset' command)." RETCODE);
-			}
-			return 102;
-		}
-		month = month - 1;
-		if (day < 1 || day > 31) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez un jour correct svp (entre 1 et 31).\n");
-				ladmin_log("Jour incorrect pour la date ('timeset' command)." RETCODE);
-			} else {
-				printf("Please give a correct value for the day (from 1 to 31).\n");
-				ladmin_log("Invalid day for the date ('timeset' command)." RETCODE);
-			}
-			return 102;
-		}
-		if (((month == 3 || month == 5 || month == 8 || month == 10) && day > 30) ||
-		    (month == 1 && day > 29)) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez un jour correct en fonction du mois (%d) svp.\n", month);
-				ladmin_log("Jour incorrect pour ce mois correspondant ('timeset' command)." RETCODE);
-			} else {
-				printf("Please give a correct value for a day of this month (%d).\n", month);
-				ladmin_log("Invalid day for this month ('timeset' command)." RETCODE);
-			}
-			return 102;
-		}
-		if (hour < 0 || hour > 23) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez une heure correcte svp (entre 0 et 23).\n");
-				ladmin_log("Heure incorrecte pour l'heure ('timeset' command)." RETCODE);
-			} else {
-				printf("Please give a correct value for the hour (from 0 to 23).\n");
-				ladmin_log("Invalid hour for the time ('timeset' command)." RETCODE);
-			}
-			return 102;
-		}
-		if (minute < 0 || minute > 59) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez des minutes correctes svp (entre 0 et 59).\n");
-				ladmin_log("Minute incorrecte pour l'heure ('timeset' command)." RETCODE);
-			} else {
-				printf("Please give a correct value for the minutes (from 0 to 59).\n");
-				ladmin_log("Invalid minute for the time ('timeset' command)." RETCODE);
-			}
-			return 102;
-		}
-		if (second < 0 || second > 59) {
-			if (defaultlanguage == 'F') {
-				printf("Entrez des secondes correctes svp (entre 0 et 59).\n");
-				ladmin_log("Seconde incorrecte pour l'heure ('timeset' command)." RETCODE);
-			} else {
-				printf("Please give a correct value for the seconds (from 0 to 59).\n");
-				ladmin_log("Invalid second for the time ('timeset' command)." RETCODE);
-			}
-			return 102;
-		}
-		tmtime->tm_year = year;
-		tmtime->tm_mon = month;
-		tmtime->tm_mday = day;
-		tmtime->tm_hour = hour;
-		tmtime->tm_min = minute;
-		tmtime->tm_sec = second;
-		tmtime->tm_isdst = -1; // -1: no winter/summer time modification
-		connect_until_time = mktime(tmtime);
-		if (connect_until_time == -1) {
-			if (defaultlanguage == 'F') {
-				printf("Date incorrecte.\n");
-				printf("Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n");
-				ladmin_log("Date incorrecte. ('timeset' command)." RETCODE);
-			} else {
-				printf("Invalid date.\n");
-				printf("Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n");
-				ladmin_log("Invalid date. ('timeset' command)." RETCODE);
-			}
-			return 102;
-		}
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour fixer une date limite d'utilisation." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to set a time limit." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7948;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	WFIFOL(login_fd,26) = (int)connect_until_time;
-	WFIFOSET(login_fd,30);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//------------------------------------------------------------------------------
-// Sub-function: Asking to displaying information about an account (by its name)
-//------------------------------------------------------------------------------
-int whoaccount(char* param) {
-	char name[1023];
-
-	memset(name, '\0', sizeof(name));
-
-	if (strlen(param) == 0 ||
-	    (sscanf(param, "\"%[^\"]\"", name) < 1 &&
-	     sscanf(param, "'%[^']'", name) < 1 &&
-	     sscanf(param, "%[^\r\n]", name) < 1) ||
-	     strlen(name) == 0) {
-		if (defaultlanguage == 'F') {
-			printf("Entrez un nom de compte svp.\n");
-			printf("<exemple> who nomtest\n");
-			ladmin_log("Aucun nom n'a été donné pour trouver le compte." RETCODE);
-		} else {
-			printf("Please input an account name.\n");
-			printf("<example> who testname\n");
-			ladmin_log("No name was given to found the account." RETCODE);
-		}
-		return 136;
-	}
-	if (verify_accountname(name) == 0) {
-		return 102;
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le information d'un compte (par le nom)." RETCODE);
-	} else {
-		ladmin_log("Request to login-server to obtain information about an account (by its name)." RETCODE);
-	}
-
-	WFIFOW(login_fd,0) = 0x7952;
-	memcpy(WFIFOP(login_fd,2), name, 24);
-	WFIFOSET(login_fd,26);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//--------------------------------------------------------
-// Sub-function: Asking of the version of the login-server
-//--------------------------------------------------------
-int checkloginversion() {
-	if (defaultlanguage == 'F')
-		ladmin_log("Envoi d'un requête au serveur de logins pour obtenir sa version." RETCODE);
-	else
-		ladmin_log("Request to login-server to obtain its version." RETCODE);
-
-	WFIFOW(login_fd,0) = 0x7530;
-	WFIFOSET(login_fd,2);
-	bytes_to_read = 1;
-
-	return 0;
-}
-
-//---------------------------------------------
-// Prompt function
-// this function wait until user type a command
-// and analyse the command.
-//---------------------------------------------
-int prompt() {
-	int i, j;
-	char buf[1024];
-	char *p;
-
-	// while we don't wait new packets
-	while (bytes_to_read == 0) {
-		// for help with the console colors look here:
-		// http://www.edoceo.com/liberum/?doc=printf-with-color
-		// some code explanation (used here):
-		// \033[2J : clear screen and go up/left (0, 0 position)
-		// \033[K  : clear line from actual position to end of the line
-		// \033[0m : reset color parameter
-		// \033[1m : use bold for font
-		printf("\n");
-		if (defaultlanguage == 'F')
-			printf("\033[32mPour afficher les commandes, tapez 'Entrée'.\033[0m\n");
-		else
-			printf("\033[32mTo list the commands, type 'enter'.\033[0m\n");
-		printf("\033[0;36mLadmin-> \033[0m");
-		printf("\033[1m");
-		fflush(stdout);
-
-		// get command and parameter
-		memset(buf, '\0', sizeof(buf));
-		fflush(stdin);
-		fgets(buf, 1023, stdin);
-		buf[1023] = '\0';
-
-		printf("\033[0m");
-		fflush(stdout);
-
-		// remove final \n
-		if((p = strrchr(buf, '\n')) != NULL)
-			p[0] = '\0';
-		// remove all control char
-		for (i = 0; buf[i]; i++)
-			if (buf[i] < 32) {
-				// remove cursor control.
-				if (buf[i] == 27 && buf[i+1] == '[' &&
-				    (buf[i+2] == 'H' || // home position (cursor)
-				     buf[i+2] == 'J' || // clear screen
-				     buf[i+2] == 'A' || // up 1 line
-				     buf[i+2] == 'B' || // down 1 line
-				     buf[i+2] == 'C' || // right 1 position
-				     buf[i+2] == 'D' || // left 1 position
-				     buf[i+2] == 'G')) { // center cursor (windows)
-					for (j = i; buf[j]; j++)
-						buf[j] = buf[j+3];
-				} else if (buf[i] == 27 && buf[i+1] == '[' && buf[i+2] == '2' && buf[i+3] == 'J') { // clear screen
-					for (j = i; buf[j]; j++)
-						buf[j] = buf[j+4];
-				} else if (buf[i] == 27 && buf[i+1] == '[' && buf[i+3] == '~' &&
-				           (buf[i+2] == '1' || // home (windows)
-				            buf[i+2] == '2' || // insert (windows)
-				            buf[i+2] == '3' || // del (windows)
-				            buf[i+2] == '4' || // end (windows)
-				            buf[i+2] == '5' || // pgup (windows)
-				            buf[i+2] == '6')) { // pgdown (windows)
-					for (j = i; buf[j]; j++)
-						buf[j] = buf[j+4];
-				} else {
-					// remove other control char.
-					for (j = i; buf[j]; j++)
-						buf[j] = buf[j+1];
-				}
-				i--;
-			}
-
-		// extract command name and parameters
-		memset(command, '\0', sizeof(command));
-		memset(parameters, '\0', sizeof(parameters));
-		sscanf(buf, "%1023s %[^\n]", command, parameters);
-		command[1023] = '\0';
-		parameters[1023] = '\0';
-
-		// lowercase for command line
-		for (i = 0; command[i]; i++)
-			command[i] = tolower(command[i]);
-
-		if (command[0] == '?' || strlen(command) == 0) {
-			if (defaultlanguage == 'F') {
-				strcpy(buf, "aide");
-				strcpy(command, "aide");
-			} else {
-				strcpy(buf, "help");
-				strcpy(command, "help");
-			}
-		}
-
-		// Analyse of the command
-		check_command(command); // give complete name to the command
-
-		if (strlen(parameters) == 0) {
-			if (defaultlanguage == 'F') {
-				ladmin_log("Commande: '%s' (sans paramètre)" RETCODE, command, parameters);
-			} else {
-				ladmin_log("Command: '%s' (without parameters)" RETCODE, command, parameters);
-			}
-		} else {
-			if (defaultlanguage == 'F') {
-				ladmin_log("Commande: '%s', paramètres: '%s'" RETCODE, command, parameters);
-			} else {
-				ladmin_log("Command: '%s', parameters: '%s'" RETCODE, command, parameters);
-			}
-		}
-
-		// Analyse of the command
-// help
-		if (strcmp(command, "aide") == 0) {
-			display_help(parameters, 1); // 1: french
-		} else if (strcmp(command, "help") == 0 ) {
-			display_help(parameters, 0); // 0: english
-// general commands
-		} else if (strcmp(command, "add") == 0) {
-			addaccount(parameters, 0); // 0: no email
-		} else if (strcmp(command, "ban") == 0) {
-			banaccount(parameters);
-		} else if (strcmp(command, "banadd") == 0) {
-			banaddaccount(parameters);
-		} else if (strcmp(command, "banset") == 0) {
-			bansetaccount(parameters);
-		} else if (strcmp(command, "block") == 0) {
-			blockaccount(parameters);
-		} else if (strcmp(command, "check") == 0) {
-			checkaccount(parameters);
-		} else if (strcmp(command, "create") == 0) {
-			addaccount(parameters, 1); // 1: with email
-		} else if (strcmp(command, "delete") == 0) {
-			delaccount(parameters);
-		} else if (strcmp(command, "email") == 0) {
-			changeemail(parameters);
-		} else if (strcmp(command, "getcount") == 0) {
-			getlogincount();
-		} else if (strcmp(command, "gm") == 0) {
-			changegmlevel(parameters);
-		} else if (strcmp(command, "id") == 0) {
-			idaccount(parameters);
-		} else if (strcmp(command, "info") == 0) {
-			infoaccount(atoi(parameters));
-		} else if (strcmp(command, "kami") == 0) {
-			sendbroadcast(0, parameters); // flag for normal
-		} else if (strcmp(command, "kamib") == 0) {
-			sendbroadcast(0x10, parameters); // flag for blue
-		} else if (strcmp(command, "language") == 0) {
-			changelanguage(parameters);
-		} else if (strcmp(command, "list") == 0) {
-			listaccount(parameters, 0); // 0: to list all
-		} else if (strcmp(command, "listban") == 0) {
-			listaccount(parameters, 3); // 3: to list only accounts with state or bannished
-		} else if (strcmp(command, "listgm") == 0) {
-			listaccount(parameters, 1); // 1: to list only GM
-		} else if (strcmp(command, "listok") == 0) {
-			listaccount(parameters, 4); // 4: to list only accounts without state and not bannished
-		} else if (strcmp(command, "memo") == 0) {
-			changememo(parameters);
-		} else if (strcmp(command, "name") == 0) {
-			nameaccount(atoi(parameters));
-		} else if (strcmp(command, "password") == 0) {
-			changepasswd(parameters);
-		} else if (strcmp(command, "reloadgm") == 0) {
-			reloadGM();
-		} else if (strcmp(command, "search") == 0) { // no regex in C version
-			listaccount(parameters, 2); // 2: to list with pattern
-		} else if (strcmp(command, "sex") == 0) {
-			changesex(parameters);
-		} else if (strcmp(command, "state") == 0) {
-			changestate(parameters);
-		} else if (strcmp(command, "timeadd") == 0) {
-			timeaddaccount(parameters);
-		} else if (strcmp(command, "timeset") == 0) {
-			timesetaccount(parameters);
-		} else if (strcmp(command, "unban") == 0) {
-			unbanaccount(parameters);
-		} else if (strcmp(command, "unblock") == 0) {
-			unblockaccount(parameters);
-		} else if (strcmp(command, "version") == 0) {
-			checkloginversion();
-		} else if (strcmp(command, "who") == 0) {
-			whoaccount(parameters);
-// quit
-		} else if (strcmp(command, "quit") == 0 ||
-		           strcmp(command, "exit") == 0 ||
-		           strcmp(command, "end") == 0) {
-			if (defaultlanguage == 'F') {
-				printf("Au revoir.\n");
-			} else {
-				printf("Bye.\n");
-			}
-			exit(0);
-// unknown command
-		} else {
-			if (defaultlanguage == 'F') {
-				printf("Commande inconnue [%s].\n", buf);
-				ladmin_log("Commande inconnue [%s]." RETCODE, buf);
-			} else {
-				printf("Unknown command [%s].\n", buf);
-				ladmin_log("Unknown command [%s]." RETCODE, buf);
-			}
-		}
-	}
-
-	return 0;
-}
-
-//-------------------------------------------------------------
-// Function: Parse receiving informations from the login-server
-//-------------------------------------------------------------
-int parse_fromlogin(int fd) {
-	struct char_session_data *sd;
-
-	if (session[fd]->eof) {
-		if (defaultlanguage == 'F') {
-			printf("Impossible de se connecter au serveur de login [%s:%d] !\n", loginserverip, loginserverport);
-			ladmin_log("Impossible de se connecter au serveur de login [%s:%d] !" RETCODE, loginserverip, loginserverport);
-		} else {
-			printf("Impossible to have a connection with the login-server [%s:%d] !\n", loginserverip, loginserverport);
-			ladmin_log("Impossible to have a connection with the login-server [%s:%d] !" RETCODE, loginserverip, loginserverport);
-		}
-		close(fd);
-		delete_session(fd);
-		exit (0);
-	}
-
-//	printf("parse_fromlogin : %d %d %d\n", fd, RFIFOREST(fd), RFIFOW(fd,0));
-	sd = (struct char_session_data*)session[fd]->session_data;
-
-	while(RFIFOREST(fd) >= 2) {
-		switch(RFIFOW(fd,0)) {
-		case 0x7919:	// answer of a connection request
-			if (RFIFOREST(fd) < 3)
-				return 0;
-			if (RFIFOB(fd,2) != 0) {
-				if (defaultlanguage == 'F') {
-					printf("Erreur de login:\n");
-					printf(" - mot de passe incorrect,\n");
-					printf(" - système d'administration non activé, ou\n");
-					printf(" - IP non autorisée.\n");
-					ladmin_log("Erreur de login: mot de passe incorrect, système d'administration non activé, ou IP non autorisée." RETCODE);
-				} else {
-					printf("Error at login:\n");
-					printf(" - incorrect password,\n");
-					printf(" - administration system not activated, or\n");
-					printf(" - unauthorised IP.\n");
-					ladmin_log("Error at login: incorrect password, administration system not activated, or unauthorised IP." RETCODE);
-				}
-				session[fd]->eof = 1;
-				//bytes_to_read = 1; // not stop at prompt
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Connexion établie.\n");
-					ladmin_log("Connexion établie." RETCODE);
-					printf("Lecture de la version du serveur de login...\n");
-					ladmin_log("Lecture de la version du serveur de login..." RETCODE);
-				} else {
-					printf("Established connection.\n");
-					ladmin_log("Established connection." RETCODE);
-					printf("Reading of the version of the login-server...\n");
-					ladmin_log("Reading of the version of the login-server..." RETCODE);
-				}
-				//bytes_to_read = 1; // unchanged
-				checkloginversion();
-			}
-			RFIFOSKIP(fd,3);
-			break;
-
-#ifdef PASSWORDENC
-		case 0x01dc:	// answer of a coding key request
-			if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2))
-				return 0;
-		  {
-			char md5str[64] = "", md5bin[32], md5key[RFIFOW(fd,2) - 4 + 1];
-			memcpy(md5key, RFIFOP(fd,4), RFIFOW(fd,2) - 4);
-			md5key[sizeof(md5key)-1] = '0';
-			if (passenc == 1) {
-				strncpy(md5str, (const char*)RFIFOP(fd,4), RFIFOW(fd,2) - 4);
-				strcat(md5str, loginserveradminpassword);
-			} else if (passenc == 2) {
-				strncpy(md5str, loginserveradminpassword, sizeof(loginserveradminpassword));
-				strcat(md5str, (const char*)RFIFOP(fd,4));
-			}
-			MD5_String2binary(md5str, md5bin);
-			WFIFOW(login_fd,0) = 0x7918; // Request for administation login (encrypted password)
-			WFIFOW(login_fd,2) = passenc; // Encrypted type
-			memcpy(WFIFOP(login_fd,4), md5bin, 16);
-			WFIFOSET(login_fd,20);
-			if (defaultlanguage == 'F') {
-				printf("Réception de la clef MD5.\n");
-				ladmin_log("Réception de la clef MD5." RETCODE);
-				printf("Envoi du mot de passe crypté...\n");
-				ladmin_log("Envoi du mot de passe crypté..." RETCODE);
-			} else {
-				printf("Receiving of the MD5 key.\n");
-				ladmin_log("Receiving of the MD5 key." RETCODE);
-				printf("Sending of the encrypted password...\n");
-				ladmin_log("Sending of the encrypted password..." RETCODE);
-			}
-		  }
-			bytes_to_read = 1;
-			RFIFOSKIP(fd,RFIFOW(fd,2));
-			break;
-#endif
-
-		case 0x7531:	// Displaying of the version of the login-server
-			if (RFIFOREST(fd) < 10)
-				return 0;
-			printf("  Login-Server [%s:%d]\n", loginserverip, loginserverport);
-			if (((int)RFIFOB(login_fd,5)) == 0) {
-				printf("  eAthena version stable-%d.%d", (int)RFIFOB(login_fd,2), (int)RFIFOB(login_fd,3));
-			} else {
-				printf("  eAthena version dev-%d.%d", (int)RFIFOB(login_fd,2), (int)RFIFOB(login_fd,3));
-			}
-			if (((int)RFIFOB(login_fd,4)) == 0)
-				printf(" revision %d", (int)RFIFOB(login_fd,4));
-			if (((int)RFIFOB(login_fd,6)) == 0)
-				printf("%d.\n", RFIFOW(login_fd,8));
-			else
-				printf("-mod%d.\n", RFIFOW(login_fd,8));
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,10);
-			break;
-
-		case 0x7921:	// Displaying of the list of accounts
-			if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2))
-				return 0;
-			if (RFIFOW(fd,2) < 5) {
-				if (defaultlanguage == 'F') {
-					ladmin_log("  Réception d'une liste des comptes vide." RETCODE);
-					if (list_count == 0)
-						printf("Aucun compte trouvé.\n");
-					else if (list_count == 1)
-						printf("1 compte trouvé.\n");
-					else
-						printf("%d comptes trouvés.\n", list_count);
-				} else {
-					ladmin_log("  Receiving of a void accounts list." RETCODE);
-					if (list_count == 0)
-						printf("No account found.\n");
-					else if (list_count == 1)
-						printf("1 account found.\n");
-					else
-						printf("%d accounts found.\n", list_count);
-				}
-				bytes_to_read = 0;
-			} else {
-				int i;
-				if (defaultlanguage == 'F')
-					ladmin_log("  Réception d'une liste des comptes." RETCODE);
-				else
-					ladmin_log("  Receiving of a accounts list." RETCODE);
-				for(i = 4; i < RFIFOW(fd,2); i += 38) {
-					int j;
-					char userid[24];
-					char lower_userid[24];
-					memcpy(userid, RFIFOP(fd,i + 5), sizeof(userid));
-					userid[sizeof(userid)-1] = '\0';
-					memset(lower_userid, '\0', sizeof(lower_userid));
-					for (j = 0; userid[j]; j++)
-						lower_userid[j] = tolower(userid[j]);
-					list_first = RFIFOL(fd,i) + 1;
-					// here are checks...
-					if (list_type == 0 ||
-					    (list_type == 1 && RFIFOB(fd,i+4) > 0) ||
-					    (list_type == 2 && strstr(lower_userid, parameters) != NULL) ||
-					    (list_type == 3 && RFIFOL(fd,i+34) != 0) ||
-					    (list_type == 4 && RFIFOL(fd,i+34) == 0)) {
-						printf("%10d ", RFIFOL(fd,i));
-						if (RFIFOB(fd,i+4) == 0)
-							printf("   ");
-						else
-							printf("%2d ", (int)RFIFOB(fd,i+4));
-						printf("%-24s", userid);
-						if (defaultlanguage == 'F') {
-							if (RFIFOB(fd,i+29) == 0)
-								printf("%-5s ", "Femme");
-							else if (RFIFOB(fd,i+29) == 1)
-								printf("%-5s ", "Male");
-							else
-								printf("%-5s ", "Servr");
-						} else {
-							if (RFIFOB(fd,i+29) == 0)
-								printf("%-5s ", "Femal");
-							else if (RFIFOB(fd,i+29) == 1)
-								printf("%-5s ", "Male");
-							else
-								printf("%-5s ", "Servr");
-						}
-						printf("%6d ", RFIFOL(fd,i+30));
-						switch(RFIFOL(fd,i+34)) {
-						case 0:
-							if (defaultlanguage == 'F')
-								printf("%-27s\n", "Compte Ok");
-							else
-								printf("%-27s\n", "Account OK");
-							break;
-						case 1:
-							printf("%-27s\n", "Unregistered ID");
-							break;
-						case 2:
-							printf("%-27s\n", "Incorrect Password");
-							break;
-						case 3:
-							printf("%-27s\n", "This ID is expired");
-							break;
-						case 4:
-							printf("%-27s\n", "Rejected from Server");
-							break;
-						case 5:
-							printf("%-27s\n", "Blocked by the GM Team"); // You have been blocked by the GM Team
-							break;
-						case 6:
-							printf("%-27s\n", "Your EXE file is too old"); // Your Game's EXE file is not the latest version
-							break;
-						case 7:
-							printf("%-27s\n", "Banishement or");
-							printf("                                                   Prohibited to login until...\n"); // You are Prohibited to log in until %s
-							break;
-						case 8:
-							printf("%-27s\n", "Server is over populated");
-							break;
-						case 9:
-							printf("%-27s\n", "No MSG");
-							break;
-						default: // 100
-							printf("%-27s\n", "This ID is totally erased"); // This ID has been totally erased
-							break;
-						}
-						list_count++;
-					}
-				}
-				// asking of the following acounts
-				if (defaultlanguage == 'F')
-					ladmin_log("Envoi d'un requête au serveur de logins pour obtenir la liste des comptes de %d à %d (complément)." RETCODE, list_first, list_last);
-				else
-					ladmin_log("Request to login-server to obtain the list of accounts from %d to %d (complement)." RETCODE, list_first, list_last);
-				WFIFOW(login_fd,0) = 0x7920;
-				WFIFOL(login_fd,2) = list_first;
-				WFIFOL(login_fd,6) = list_last;
-				WFIFOSET(login_fd,10);
-				bytes_to_read = 1;
-			}
-			RFIFOSKIP(fd,RFIFOW(fd,2));
-			break;
-
-		case 0x7931:	// Answer of login-server about an account creation
-			if (RFIFOREST(fd) < 30)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec à la création du compte [%s]. Un compte identique existe déjà.\n", RFIFOP(fd,6));
-					ladmin_log("Echec à la création du compte [%s]. Un compte identique existe déjà." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] creation failed. Same account already exists.\n", RFIFOP(fd,6));
-					ladmin_log("Account [%s] creation failed. Same account already exists." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Compte [%s] créé avec succès [id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Compte [%s] créé avec succès [id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				} else {
-					printf("Account [%s] is successfully created [id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Account [%s] is successfully created [id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,30);
-			break;
-
-		case 0x7933:	// Answer of login-server about an account deletion
-			if (RFIFOREST(fd) < 30)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec de la suppression du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
-					ladmin_log("Echec de la suppression du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] deletion failed. Account doesn't exist.\n", RFIFOP(fd,6));
-					ladmin_log("Account [%s] deletion failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Compte [%s][id: %d] SUPPRIME avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Compte [%s][id: %d] SUPPRIME avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				} else {
-					printf("Account [%s][id: %d] is successfully DELETED.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Account [%s][id: %d] is successfully DELETED." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,30);
-			break;
-
-		case 0x7935:	// answer of the change of an account password
-			if (RFIFOREST(fd) < 30)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec de la modification du mot de passe du compte [%s].\n", RFIFOP(fd,6));
-					printf("Le compte [%s] n'existe pas.\n", RFIFOP(fd,6));
-					ladmin_log("Echec de la modification du mot de passe du compte. Le compte [%s] n'existe pas." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] password changing failed.\n", RFIFOP(fd,6));
-					printf("Account [%s] doesn't exist.\n", RFIFOP(fd,6));
-					ladmin_log("Account password changing failed. The compte [%s] doesn't exist." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Modification du mot de passe du compte [%s][id: %d] réussie.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Modification du mot de passe du compte [%s][id: %d] réussie." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				} else {
-					printf("Account [%s][id: %d] password successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Account [%s][id: %d] password successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,30);
-			break;
-
-		case 0x7937:	// answer of the change of an account state
-			if (RFIFOREST(fd) < 34)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec du changement du statut du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
-					ladmin_log("Echec du changement du statut du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] state changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
-					ladmin_log("Account [%s] state changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				char tmpstr[256];
-				if (defaultlanguage == 'F') {
-					sprintf(tmpstr, "Statut du compte [%s] changé avec succès en [", RFIFOP(fd,6));
-				} else {
-					sprintf(tmpstr, "Account [%s] state successfully changed in [", RFIFOP(fd,6));
-				}
-				switch(RFIFOL(fd,30)) {
-				case 0:
-					if (defaultlanguage == 'F')
-						strcat(tmpstr, "0: Compte Ok");
-					else
-						strcat(tmpstr, "0: Account OK");
-					break;
-				case 1:
-					strcat(tmpstr, "1: Unregistered ID");
-					break;
-				case 2:
-					strcat(tmpstr, "2: Incorrect Password");
-					break;
-				case 3:
-					strcat(tmpstr, "3: This ID is expired");
-					break;
-				case 4:
-					strcat(tmpstr, "4: Rejected from Server");
-					break;
-				case 5:
-					strcat(tmpstr, "5: You have been blocked by the GM Team");
-					break;
-				case 6:
-					strcat(tmpstr, "6: [Your Game's EXE file is not the latest version");
-					break;
-				case 7:
-					strcat(tmpstr, "7: You are Prohibited to log in until...");
-					break;
-				case 8:
-					strcat(tmpstr, "8: Server is jammed due to over populated");
-					break;
-				case 9:
-					strcat(tmpstr, "9: No MSG");
-					break;
-				default: // 100
-					strcat(tmpstr, "100: This ID is totally erased");
-					break;
-				}
-				strcat(tmpstr, "]");
-				printf("%s\n", tmpstr);
-				ladmin_log("%s%s", tmpstr, RETCODE);
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,34);
-			break;
-
-		case 0x7939:	// answer of the number of online players
-			if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2))
-				return 0;
-		  {
-			// Get length of the received packet
-			int i;
-			char name[20];
-			if (defaultlanguage == 'F') {
-				ladmin_log("  Réception du nombre de joueurs en ligne." RETCODE);
-			} else {
-				ladmin_log("  Receiving of the number of online players." RETCODE);
-			}
-			// Read information of the servers
-			if (RFIFOW(fd,2) < 5) {
-				if (defaultlanguage == 'F') {
-					printf("  Aucun serveur n'est connecté au login serveur.\n");
-				} else {
-					printf("  No server is connected to the login-server.\n");
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("  Nombre de joueurs en ligne (serveur: nb):\n");
-				} else {
-					printf("  Number of online players (server: number).\n");
-				}
-				// Displaying of result
-				for(i = 4; i < RFIFOW(fd,2); i += 32) {
-					memcpy(name, RFIFOP(fd,i+6), sizeof(name));
-					name[sizeof(name) - 1] = '\0';
-					printf("    %-20s : %5d\n", name, RFIFOW(fd,i+26));
-				}
-			}
-		  }
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,RFIFOW(fd,2));
-			break;
-
-		case 0x793b:	// answer of the check of a password
-			if (RFIFOREST(fd) < 30)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Le compte [%s] n'existe pas ou le mot de passe est incorrect.\n", RFIFOP(fd,6));
-					ladmin_log("Le compte [%s] n'existe pas ou le mot de passe est incorrect." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("The account [%s] doesn't exist or the password is incorrect.\n", RFIFOP(fd,6));
-					ladmin_log("The account [%s] doesn't exist or the password is incorrect." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Le mot de passe donné correspond bien au compte [%s][id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Le mot de passe donné correspond bien au compte [%s][id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				} else {
-					printf("The proposed password is correct for the account [%s][id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("The proposed password is correct for the account [%s][id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,30);
-			break;
-
-		case 0x793d:	// answer of the change of an account sex
-			if (RFIFOREST(fd) < 30)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec de la modification du sexe du compte [%s].\n", RFIFOP(fd,6));
-					printf("Le compte [%s] n'existe pas ou le sexe est déjà celui demandé.\n", RFIFOP(fd,6));
-					ladmin_log("Echec de la modification du sexe du compte. Le compte [%s] n'existe pas ou le sexe est déjà celui demandé." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] sex changing failed.\n", RFIFOP(fd,6));
-					printf("Account [%s] doesn't exist or the sex is already the good sex.\n", RFIFOP(fd,6));
-					ladmin_log("Account sex changing failed. The compte [%s] doesn't exist or the sex is already the good sex." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Sexe du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Sexe du compte [%s][id: %d] changé avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				} else {
-					printf("Account [%s][id: %d] sex successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Account [%s][id: %d] sex successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,30);
-			break;
-
-		case 0x793f:	// answer of the change of an account GM level
-			if (RFIFOREST(fd) < 30)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec de la modification du niveau de GM du compte [%s].\n", RFIFOP(fd,6));
-					printf("Le compte [%s] n'existe pas, le niveau de GM est déjà celui demandé\n", RFIFOP(fd,6));
-					printf("ou il est impossible de modifier le fichier des comptes GM.\n");
-					ladmin_log("Echec de la modification du niveau de GM du compte. Le compte [%s] n'existe pas, le niveau de GM est déjà celui demandé ou il est impossible de modifier le fichier des comptes GM." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] GM level changing failed.\n", RFIFOP(fd,6));
-					printf("Account [%s] doesn't exist, the GM level is already the good GM level\n", RFIFOP(fd,6));
-					printf("or it's impossible to modify the GM accounts file.\n");
-					ladmin_log("Account GM level changing failed. The compte [%s] doesn't exist, the GM level is already the good sex or it's impossible to modify the GM accounts file." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Niveau de GM du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Niveau de GM du compte [%s][id: %d] changé avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				} else {
-					printf("Account [%s][id: %d] GM level successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Account [%s][id: %d] GM level successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,30);
-			break;
-
-		case 0x7941:	// answer of the change of an account email
-			if (RFIFOREST(fd) < 30)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec de la modification de l'e-mail du compte [%s].\n", RFIFOP(fd,6));
-					printf("Le compte [%s] n'existe pas.\n", RFIFOP(fd,6));
-					ladmin_log("Echec de la modification de l'e-mail du compte. Le compte [%s] n'existe pas." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] e-mail changing failed.\n", RFIFOP(fd,6));
-					printf("Account [%s] doesn't exist.\n", RFIFOP(fd,6));
-					ladmin_log("Account e-mail changing failed. The compte [%s] doesn't exist." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Modification de l'e-mail du compte [%s][id: %d] réussie.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Modification de l'e-mail du compte [%s][id: %d] réussie." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				} else {
-					printf("Account [%s][id: %d] e-mail successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Account [%s][id: %d] e-mail successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,30);
-			break;
-
-		case 0x7943:	// answer of the change of an account memo
-			if (RFIFOREST(fd) < 30)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec du changement du mémo du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
-					ladmin_log("Echec du changement du mémo du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] memo changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
-					ladmin_log("Account [%s] memo changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Mémo du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Mémo du compte [%s][id: %d] changé avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				} else {
-					printf("Account [%s][id: %d] memo successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Account [%s][id: %d] memo successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,30);
-			break;
-
-		case 0x7945:	// answer of an account id search
-			if (RFIFOREST(fd) < 30)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
-					ladmin_log("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Unable to find the account [%s] id. Account doesn't exist.\n", RFIFOP(fd,6));
-					ladmin_log("Unable to find the account [%s] id. Account doesn't exist." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Le compte [%s] a pour id: %d.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("Le compte [%s] a pour id: %d." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				} else {
-					printf("The account [%s] have the id: %d.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-					ladmin_log("The account [%s] have the id: %d." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,30);
-			break;
-
-		case 0x7947:	// answer of an account name search
-			if (RFIFOREST(fd) < 30)
-				return 0;
-			if (strcmp((const char*)RFIFOP(fd,6), "") == 0) {
-				if (defaultlanguage == 'F') {
-					printf("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas.\n", RFIFOL(fd,2));
-					ladmin_log("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas." RETCODE, RFIFOL(fd,2));
-				} else {
-					printf("Unable to find the account [%d] name. Account doesn't exist.\n", RFIFOL(fd,2));
-					ladmin_log("Unable to find the account [%d] name. Account doesn't exist." RETCODE, RFIFOL(fd,2));
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Le compte [id: %d] a pour nom: %s.\n", RFIFOL(fd,2), RFIFOP(fd,6));
-					ladmin_log("Le compte [id: %d] a pour nom: %s." RETCODE, RFIFOL(fd,2), RFIFOP(fd,6));
-				} else {
-					printf("The account [id: %d] have the name: %s.\n", RFIFOL(fd,2), RFIFOP(fd,6));
-					ladmin_log("The account [id: %d] have the name: %s." RETCODE, RFIFOL(fd,2), RFIFOP(fd,6));
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,30);
-			break;
-
-		case 0x7949:	// answer of an account validity limit set
-			if (RFIFOREST(fd) < 34)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
-					ladmin_log("Echec du changement de la validité du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
-					ladmin_log("Account [%s] validity limit changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				time_t timestamp = RFIFOL(fd,30);
-				if (timestamp == 0) {
-					if (defaultlanguage == 'F') {
-						printf("Limite de validité du compte [%s][id: %d] changée avec succès en [illimité].\n", RFIFOP(fd,6), RFIFOL(fd,2));
-						ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès en [illimité]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-					} else {
-						printf("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited].\n", RFIFOP(fd,6), RFIFOL(fd,2));
-						ladmin_log("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-					}
-				} else {
-					char tmpstr[128];
-					strftime(tmpstr, 24, date_format, localtime(&timestamp));
-					if (defaultlanguage == 'F') {
-						printf("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-						ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-					} else {
-						printf("Validity Limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-						ladmin_log("Validity Limit of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-					}
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,34);
-			break;
-
-		case 0x794b:	// answer of an account ban set
-			if (RFIFOREST(fd) < 34)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
-					ladmin_log("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
-					ladmin_log("Account [%s] final date of banishment changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				time_t timestamp = RFIFOL(fd,30);
-				if (timestamp == 0) {
-					if (defaultlanguage == 'F') {
-						printf("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n", RFIFOP(fd,6), RFIFOL(fd,2));
-						ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-					} else {
-						printf("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), RFIFOL(fd,2));
-						ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-					}
-				} else {
-					char tmpstr[128];
-					strftime(tmpstr, 24, date_format, localtime(&timestamp));
-					if (defaultlanguage == 'F') {
-						printf("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-						ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-					} else {
-						printf("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-						ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-					}
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,34);
-			break;
-
-		case 0x794d:	// answer of an account ban date/time changing
-			if (RFIFOREST(fd) < 34)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
-					ladmin_log("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
-					ladmin_log("Account [%s] final date of banishment changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				time_t timestamp = RFIFOL(fd,30);
-				if (timestamp == 0) {
-					if (defaultlanguage == 'F') {
-						printf("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n", RFIFOP(fd,6), RFIFOL(fd,2));
-						ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-					} else {
-						printf("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), RFIFOL(fd,2));
-						ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-					}
-				} else {
-					char tmpstr[128];
-					strftime(tmpstr, 24, date_format, localtime(&timestamp));
-					if (defaultlanguage == 'F') {
-						printf("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-						ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-					} else {
-						printf("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-						ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-					}
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,34);
-			break;
-
-		case 0x794f:	// answer of a broadcast
-			if (RFIFOREST(fd) < 4)
-				return 0;
-			if (RFIFOW(fd,2) == (unsigned short)-1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec de l'envoi du message. Aucun server de char en ligne.\n");
-					ladmin_log("Echec de l'envoi du message. Aucun server de char en ligne." RETCODE);
-				} else {
-					printf("Message sending failed. No online char-server.\n");
-					ladmin_log("Message sending failed. No online char-server." RETCODE);
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					printf("Message transmis au server de logins avec succès.\n");
-					ladmin_log("Message transmis au server de logins avec succès." RETCODE);
-				} else {
-					printf("Message successfully sended to login-server.\n");
-					ladmin_log("Message successfully sended to login-server." RETCODE);
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,4);
-			break;
-
-		case 0x7951:	// answer of an account validity limit changing
-			if (RFIFOREST(fd) < 34)
-				return 0;
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
-					ladmin_log("Echec du changement de la validité du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
-				} else {
-					printf("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
-					ladmin_log("Account [%s] validity limit changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
-				}
-			} else {
-				time_t timestamp = RFIFOL(fd,30);
-				if (timestamp == 0) {
-					if (defaultlanguage == 'F') {
-						printf("Limite de validité du compte [%s][id: %d] inchangée.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-						printf("Le compte a une validité illimitée ou\n");
-						printf("la modification est impossible avec les ajustements demandés.\n");
-						ladmin_log("Limite de validité du compte [%s][id: %d] inchangée. Le compte a une validité illimitée ou la modification est impossible avec les ajustements demandés." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-					} else {
-						printf("Validity limit of the account [%s][id: %d] unchanged.\n", RFIFOP(fd,6), RFIFOL(fd,2));
-						printf("The account have an unlimited validity limit or\n");
-						printf("the changing is impossible with the proposed adjustments.\n");
-						ladmin_log("Validity limit of the account [%s][id: %d] unchanged. The account have an unlimited validity limit or the changing is impossible with the proposed adjustments." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
-					}
-				} else {
-					char tmpstr[128];
-					strftime(tmpstr, 24, date_format, localtime(&timestamp));
-					if (defaultlanguage == 'F') {
-						printf("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-						ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-					} else {
-						printf("Validity limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-						ladmin_log("Validity limit of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
-					}
-				}
-			}
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,34);
-			break;
-
-		case 0x7953:	// answer of a request about informations of an account (by account name/id)
-			if (RFIFOREST(fd) < 150 || RFIFOREST(fd) < (150 + RFIFOW(fd,148)))
-				return 0;
-		  {
-			char userid[24], error_message[20], lastlogin[24], last_ip[16], email[40], memo[255];
-			time_t ban_until_time; // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban)
-			time_t connect_until_time; // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited)
-			memcpy(userid, RFIFOP(fd,7), sizeof(userid));
-			userid[sizeof(userid)-1] = '\0';
-			memcpy(error_message, RFIFOP(fd,40), sizeof(error_message));
-			error_message[sizeof(error_message)-1] = '\0';
-			memcpy(lastlogin, RFIFOP(fd,60), sizeof(lastlogin));
-			lastlogin[sizeof(lastlogin)-1] = '\0';
-			memcpy(last_ip, RFIFOP(fd,84), sizeof(last_ip));
-			last_ip[sizeof(last_ip)-1] = '\0';
-			memcpy(email, RFIFOP(fd,100), sizeof(email));
-			email[sizeof(email)-1] = '\0';
-			connect_until_time = (time_t)RFIFOL(fd,140);
-			ban_until_time = (time_t)RFIFOL(fd,144);
-			memset(memo, '\0', sizeof(memo));
-			strncpy(memo, (const char*)RFIFOP(fd,150), RFIFOW(fd,148));
-			if (RFIFOL(fd,2) == -1) {
-				if (defaultlanguage == 'F') {
-					printf("Impossible de trouver le compte [%s]. Le compte n'existe pas.\n", parameters);
-					ladmin_log("Impossible de trouver le compte [%s]. Le compte n'existe pas." RETCODE, parameters);
-				} else {
-					printf("Unabled to find the account [%s]. Account doesn't exist.\n", parameters);
-					ladmin_log("Unabled to find the account [%s]. Account doesn't exist." RETCODE, parameters);
-				}
-			} else if (strlen(userid) == 0) {
-				if (defaultlanguage == 'F') {
-					printf("Impossible de trouver le compte [id: %s]. Le compte n'existe pas.\n", parameters);
-					ladmin_log("Impossible de trouver le compte [id: %s]. Le compte n'existe pas." RETCODE, parameters);
-				} else {
-					printf("Unabled to find the account [id: %s]. Account doesn't exist.\n", parameters);
-					ladmin_log("Unabled to find the account [id: %s]. Account doesn't exist." RETCODE, parameters);
-				}
-			} else {
-				if (defaultlanguage == 'F') {
-					ladmin_log("Réception d'information concernant un compte." RETCODE);
-					printf("Le compte a les caractéristiques suivantes:\n");
-				} else {
-					ladmin_log("Receiving information about an account." RETCODE);
-					printf("The account is set with:\n");
-				}
-				if (RFIFOB(fd,6) == 0) {
-					printf(" Id:     %d (non-GM)\n", RFIFOL(fd,2));
-				} else {
-					if (defaultlanguage == 'F') {
-						printf(" Id:     %d (GM niveau %d)\n", RFIFOL(fd,2), (int)RFIFOB(fd,6));
-					} else {
-						printf(" Id:     %d (GM level %d)\n", RFIFOL(fd,2), (int)RFIFOB(fd,6));
-					}
-				}
-				if (defaultlanguage == 'F') {
-					printf(" Nom:    '%s'\n", userid);
-					if (RFIFOB(fd,31) == 0)
-						printf(" Sexe:   Femme\n");
-					else if (RFIFOB(fd,31) == 1)
-						printf(" Sexe:   Male\n");
-					else
-						printf(" Sexe:   Serveur\n");
-				} else {
-					printf(" Name:   '%s'\n", userid);
-					if (RFIFOB(fd,31) == 0)
-						printf(" Sex:    Female\n");
-					else if (RFIFOB(fd,31) == 1)
-						printf(" Sex:    Male\n");
-					else
-						printf(" Sex:    Server\n");
-				}
-				printf(" E-mail: %s\n", email);
-				switch(RFIFOL(fd,36)) {
-				case 0:
-					if (defaultlanguage == 'F')
-						printf(" Statut: 0 [Compte Ok]\n");
-					else
-						printf(" Statut: 0 [Account OK]\n");
-					break;
-				case 1:
-					printf(" Statut: 1 [Unregistered ID]\n");
-					break;
-				case 2:
-					printf(" Statut: 2 [Incorrect Password]\n");
-					break;
-				case 3:
-					printf(" Statut: 3 [This ID is expired]\n");
-					break;
-				case 4:
-					printf(" Statut: 4 [Rejected from Server]\n");
-					break;
-				case 5:
-					printf(" Statut: 5 [You have been blocked by the GM Team]\n");
-					break;
-				case 6:
-					printf(" Statut: 6 [Your Game's EXE file is not the latest version]\n");
-					break;
-				case 7:
-					printf(" Statut: 7 [You are Prohibited to log in until %s]\n", error_message);
-					break;
-				case 8:
-					printf(" Statut: 8 [Server is jammed due to over populated]\n");
-					break;
-				case 9:
-					printf(" Statut: 9 [No MSG]\n");
-					break;
-				default: // 100
-					printf(" Statut: %d [This ID is totally erased]\n", RFIFOL(fd,36));
-					break;
-				}
-				if (defaultlanguage == 'F') {
-					if (ban_until_time == 0) {
-						printf(" Banissement: non banni.\n");
-					} else {
-						char tmpstr[128];
-						strftime(tmpstr, 24, date_format, localtime(&ban_until_time));
-						printf(" Banissement: jusqu'au %s.\n", tmpstr);
-					}
-					if (RFIFOL(fd,32) > 1)
-						printf(" Compteur: %d connexions.\n", RFIFOL(fd,32));
-					else
-						printf(" Compteur: %d connexion.\n", RFIFOL(fd,32));
-					printf(" Dernière connexion le: %s (ip: %s)\n", lastlogin, last_ip);
-					if (connect_until_time == 0) {
-						printf(" Limite de validité: illimité.\n");
-					} else {
-						char tmpstr[128];
-						strftime(tmpstr, 24, date_format, localtime(&connect_until_time));
-						printf(" Limite de validité: jusqu'au %s.\n", tmpstr);
-					}
-				} else {
-					if (ban_until_time == 0) {
-						printf(" Banishment: not banished.\n");
-					} else {
-						char tmpstr[128];
-						strftime(tmpstr, 24, date_format, localtime(&ban_until_time));
-						printf(" Banishment: until %s.\n", tmpstr);
-					}
-					if (RFIFOL(fd,32) > 1)
-						printf(" Count:  %d connections.\n", RFIFOL(fd,32));
-					else
-						printf(" Count:  %d connection.\n", RFIFOL(fd,32));
-					printf(" Last connection at: %s (ip: %s)\n", lastlogin, last_ip);
-					if (connect_until_time == 0) {
-						printf(" Validity limit: unlimited.\n");
-					} else {
-						char tmpstr[128];
-						strftime(tmpstr, 24, date_format, localtime(&connect_until_time));
-						printf(" Validity limit: until %s.\n", tmpstr);
-					}
-				}
-				printf(" Memo:   '%s'\n", memo);
-			}
-		  }
-			bytes_to_read = 0;
-			RFIFOSKIP(fd,150 + RFIFOW(fd,148));
-			break;
-
-		default:
-			printf("Remote administration has been disconnected (unknown packet).\n");
-			ladmin_log("'End of connection, unknown packet." RETCODE);
-			session[fd]->eof = 1;
-			return 0;
-		}
-	}
-
-	// if we don't wait new packets, do the prompt
-	prompt();
-
-	return 0;
-}
-
-//------------------------------------
-// Function to connect to login-server
-//------------------------------------
-int Connect_login_server() {
-	if (defaultlanguage == 'F') {
-		printf("Essai de connection au server de logins...\n");
-		ladmin_log("Essai de connection au server de logins..." RETCODE);
-	} else {
-		printf("Attempt to connect to login-server...\n");
-		ladmin_log("Attempt to connect to login-server..." RETCODE);
-	}
-
-	login_fd = make_connection(login_ip, loginserverport);
-
-#ifdef PASSWORDENC
-	if (passenc == 0) {
-#endif
-		WFIFOW(login_fd,0) = 0x7918; // Request for administation login
-		WFIFOW(login_fd,2) = 0; // no encrypted
-		memcpy(WFIFOP(login_fd,4), loginserveradminpassword, 24);
-		WFIFOSET(login_fd,28);
-		bytes_to_read = 1;
-		if (defaultlanguage == 'F') {
-			printf("Envoi du mot de passe...\n");
-			ladmin_log("Envoi du mot de passe..." RETCODE);
-		} else {
-			printf("Sending of the password...\n");
-			ladmin_log("Sending of the password..." RETCODE);
-		}
-#ifdef PASSWORDENC
-	} else {
-		WFIFOW(login_fd,0) = 0x791a; // Sending request about the coding key
-		WFIFOSET(login_fd,2);
-		bytes_to_read = 1;
-		if (defaultlanguage == 'F') {
-			printf("Demande de la clef MD5...\n");
-			ladmin_log("Demande de la clef MD5..." RETCODE);
-		} else {
-			printf("Request about the MD5 key...\n");
-			ladmin_log("Request about the MD5 key..." RETCODE);
-		}
-	}
-#endif
-
-	return 0;
-}
-
-//-------------------------------------------------
-// Return numerical value of a switch configuration
-// on/off, english, français, deutsch, español
-//-------------------------------------------------
-int config_switch(const char *str) {
-	if (strcmpi(str, "on") == 0 || strcmpi(str, "yes") == 0 || strcmpi(str, "oui") == 0 || strcmpi(str, "ja") == 0 || strcmpi(str, "si") == 0)
-		return 1;
-	if (strcmpi(str, "off") == 0 || strcmpi(str, "no") == 0 || strcmpi(str, "non") == 0 || strcmpi(str, "nein") == 0)
-		return 0;
-
-	return atoi(str);
-}
-
-//-----------------------------------
-// Reading general configuration file
-//-----------------------------------
-int ladmin_config_read(const char *cfgName) {
-	char line[1024], w1[1024], w2[1024];
-	FILE *fp;
-
-	fp = fopen(cfgName, "r");
-	if (fp == NULL) {
-		if (defaultlanguage == 'F') {
-			printf("\033[0mFichier de configuration (%s) non trouvé.\n", cfgName);
-		} else {
-			printf("\033[0mConfiguration file (%s) not found.\n", cfgName);
-		}
-		return 1;
-	}
-
-	if (defaultlanguage == 'F') {
-		printf("\033[0m---Début de lecture du fichier de configuration Ladmin (%s)\n", cfgName);
-	} else {
-		printf("\033[0m---Start reading of Ladmin configuration file (%s)\n", cfgName);
-	}
-	while(fgets(line, sizeof(line)-1, fp)) {
-		if (line[0] == '/' && line[1] == '/')
-			continue;
-
-		line[sizeof(line)-1] = '\0';
-		if (sscanf(line, "%[^:]: %[^\r\n]", w1, w2) == 2) {
-			remove_control_chars((unsigned char *) w1);
-			remove_control_chars((unsigned char *) w2);
-
-			if(strcmpi(w1,"login_ip")==0){
-				struct hostent *h = gethostbyname (w2);
-				if (h != NULL) {
-					if (defaultlanguage == 'F') {
-						printf("Adresse du serveur de logins: %s -> %d.%d.%d.%d\n", w2, (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]);
-					} else {
-						printf("Login server IP address: %s -> %d.%d.%d.%d\n", w2, (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]);
-					}
-					sprintf(loginserverip, "%d.%d.%d.%d", (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]);
-				} else
-					memcpy(loginserverip, w2, 16);
-			} else if (strcmpi(w1, "login_port") == 0) {
-				loginserverport = atoi(w2);
-			} else if (strcmpi(w1, "admin_pass") == 0) {
-				strncpy(loginserveradminpassword, w2, sizeof(loginserveradminpassword));
-				loginserveradminpassword[sizeof(loginserveradminpassword)-1] = '\0';
-#ifdef PASSWORDENC
-			} else if (strcmpi(w1, "passenc") == 0) {
-				passenc = atoi(w2);
-				if (passenc < 0 || passenc > 2)
-					passenc = 0;
-#endif
-			} else if (strcmpi(w1, "defaultlanguage") == 0) {
-				if (w2[0] == 'F' || w2[0] == 'E')
-					defaultlanguage = w2[0];
-			} else if (strcmpi(w1, "ladmin_log_filename") == 0) {
-				strncpy(ladmin_log_filename, w2, sizeof(ladmin_log_filename));
-				ladmin_log_filename[sizeof(ladmin_log_filename)-1] = '\0';
-			} else if (strcmpi(w1, "date_format") == 0) { // note: never have more than 19 char for the date!
-				switch (atoi(w2)) {
-				case 0:
-					strcpy(date_format, "%d-%m-%Y %H:%M:%S"); // 31-12-2004 23:59:59
-					break;
-				case 1:
-					strcpy(date_format, "%m-%d-%Y %H:%M:%S"); // 12-31-2004 23:59:59
-					break;
-				case 2:
-					strcpy(date_format, "%Y-%d-%m %H:%M:%S"); // 2004-31-12 23:59:59
-					break;
-				case 3:
-					strcpy(date_format, "%Y-%m-%d %H:%M:%S"); // 2004-12-31 23:59:59
-					break;
-				}
-			} else if (strcmpi(w1, "import") == 0) {
-				ladmin_config_read(w2);
-			}
-		}
-	}
-	fclose(fp);
-
-	login_ip = inet_addr(loginserverip);
-
-	if (defaultlanguage == 'F') {
-		printf("---Lecture du fichier de configuration Ladmin terminée.\n");
-	} else {
-		printf("---End reading of Ladmin configuration file.\n");
-	}
-
-	return 0;
-}
-
-//--------------------------------------
-// Function called at exit of the server
-//--------------------------------------
-void do_final(void) {
-
-	if (already_exit_function == 0) {
-		delete_session(login_fd);
-
-		if (defaultlanguage == 'F') {
-			printf("\033[0m----Fin de Ladmin (fin normale avec fermeture de tous les fichiers).\n");
-			ladmin_log("----Fin de Ladmin (fin normale avec fermeture de tous les fichiers)." RETCODE);
-		} else {
-			printf("\033[0m----End of Ladmin (normal end with closing of all files).\n");
-			ladmin_log("----End of Ladmin (normal end with closing of all files)." RETCODE);
-		}
-
-		already_exit_function = 1;
-	}
-}
-
-//------------------------
-// Main function of ladmin
-//------------------------
-int do_init(int argc, char **argv) {
-	// read ladmin configuration
-	ladmin_config_read((argc > 1) ? argv[1] : LADMIN_CONF_NAME);
-
-	ladmin_log("");
-	if (defaultlanguage == 'F') {
-		ladmin_log("Fichier de configuration lu." RETCODE);
-	} else {
-		ladmin_log("Configuration file readed." RETCODE);
-	}
-
-	srand(time(NULL));
-
-	set_termfunc(do_final);
-	set_defaultparse(parse_fromlogin);
-
-	if (defaultlanguage == 'F') {
-		printf("Outil d'administration à distance de eAthena.\n");
-		printf("(pour eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION, ATHENA_MINOR_VERSION, ATHENA_REVISION);
-	} else {
-		printf("EAthena login-server administration tool.\n");
-		printf("(for eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION, ATHENA_MINOR_VERSION, ATHENA_REVISION);
-	}
-
-	if (defaultlanguage == 'F') {
-		ladmin_log("Ladmin est prêt." RETCODE);
-		printf("Ladmin est \033[1;32mprêt\033[0m.\n\n");
-	} else {
-		ladmin_log("Ladmin is ready." RETCODE);
-		printf("Ladmin is \033[1;32mready\033[0m.\n\n");
-	}
-
-	Connect_login_server();
-
-	atexit(do_final);
-
-	return 0;
-}