AS OF SVN REV. 5901, WE ARE NOW USING TRUNK. ALL UNTESTED BUGFIXES/FEATURES GO INTO TRUNK.

IF YOU HAVE A WORKING AND TESTED BUGFIX PUT IT INTO STABLE AS WELL AS TRUNK.  EVERYTHING ELSE
GOES INTO TRUNK AND WILL BE MERGED INTO STABLE BY VALARIS AND WIZPUTER. -- VALARIS


git-svn-id: https://rathena.svn.sourceforge.net/svnroot/rathena/trunk@5094 54d463be-8e91-2dee-dedb-b68131a5f0ec

1 files changed, 182 insertions, 0 deletions

diff --git a/conf-tmpl/login_athena.conf b/conf-tmpl/login_athena.conf
new file mode 100644
index 000000000..1866876da
--- /dev/null
+++ b/conf-tmpl/login_athena.conf
@@ -0,0 +1,182 @@
+// Athena Login Server configuration file.

+// Translated by Peter Kieser <pfak@telus.net>

+

+// The login server listens on the interface with this IP address.

+// NOTE: This allows you to run multiple servers on multiple interfaces

+// while using the same ports for each server.

+//bind_ip: 127.0.0.1

+ 

+// Login Server Port

+login_port: 6900

+

+//Time-stamp format which will be printed before all messages.

+//Can at most be 20 characters long.

+//Common formats:

+// %I:%M:%S %p (hour:minute:second 12 hour, AM/PM format)

+// %H:%M:%S (hour:minute:second, 24 hour format)

+// %d/%b/%Y (day/Month/year)

+//For full format information, consult the strftime() manual.

+//timestamp_format: [%d/%b %H:%M]

+

+//Makes server output more silent by ommitting certain types of messages:

+//1: Hide Information messages

+//2: Hide Status messages

+//4: Hide Notice Messages

+//8: Hide Warning Messages

+//16: Hide Error and SQL Error messages.

+//Example: "console_silent: 7" Hides information, status and notice messages (1+2+4)

+console_silent: 0

+

+// Whether remote administration is enabled or disabled (1 for enabled, 0 for disabled)

+admin_state: 0

+

+// Administrative password, used by ladmin (perl software) to connect remotely to server.

+// NOTICE: If you enable remote administration, you should change its value for security

+admin_pass: admin

+

+// Indicate the IP that the server accepts for remote administration.

+// put: 'all', or 'xxx.xxx.' (begin of an ip finished by '.' or a complete ip),

+//      or a network and its mask (example: '123.456.789.012/24' or '123.456.789.012/255.255.255.0')

+//      or 'clear' to suppress previous parameter (use it in import file mainly)

+// Add as many IP's as you wish.

+ladminallowip: all

+

+// Console Commands

+// Allow for console commands to be used on/off

+// This prevents usage of >& log.file

+console: off

+

+// Are login's case sensitive?

+case_sensitive: on

+

+// Gamemaster password, used with the @gm command to obtain GM commands (level of gm set with level_new_gm parameter).

+// NOTICE: You should also change this one.

+gm_pass: gm

+

+// Level of new GM created with @gm command. (default: 60)

+// If you set to 0, you disable creation of new GM with @gm.

+// To be able to create a gm with @gm, you must:

+// - give a level to this value (not 0)

+// - enable to level 0 the @gm command (atcommand_athena.conf) (default 100)

+// - enable gm commands to normal player (battle_athena.conf, atcommand_gm_only parameter)

+// - and normal player must give correct password when he use the @gm command

+level_new_gm: 60

+

+// Can you make new accounts on the server? (1 for Yes, 0 for no) 

+// (1 = _M/_F enabled, 0 = not enabled)

+new_account: 1

+

+// ********** account registration flood system **********

+// allowed_regs is the number of registrations allowed in time_allowed (in seconds)

+allowed_regs: 1

+time_allowed: 10

+

+// Account flatfile database, stores account information.

+account_filename: save/account.txt

+

+// What account AIDs have GM privs, and what level?

+gm_account_filename: conf/GM_account.txt

+

+// Timer to check if GM_account file has been changed and reload GM account automaticaly

+// (in seconds; default: 15; value: 0 (disabled), or 2 or more)

+gm_account_filename_check_timer: 15

+

+// Log Filename. All operations received by the server are logged in this file.

+login_log_filename: log/login.log

+

+// To log the login server?

+// NOTE: The login-sql server needs the login logs to enable dynamic pass failure bans.

+log_login: 1

+

+// Name of the file of that logs the unknown packets (for debug or hack check)

+login_log_unknown_packets_filename: log/login_unknown_packets.log

+

+//When set to yes, the login server will refuse connections from accounts that are considered online already. 

+//When a login attempt is rejected, the account in question is also kicked from all connected char-servers.

+//It's safe to turn this off if there's only one char-server connected, or if the char-servers don't share 

+//the same backend (ie: Multiple char servers reading from the same SQL tables)

+online_check: yes

+

+// Indicate if the unknown packets are saved or not

+//(the unknown packets coming from the char-server or ladministration does not relate to, which is always saved)

+// Be careful: if you receive an attack, your hard disk can cause lag...

+// So, active this option with a speed hard disk or for debug only.

+save_unknown_packets: 0

+

+// Indicate if you want display the parse of the packets received in a normal connection

+// It's useful for debug. Possible values: 0: no (default), 1: yes

+display_parse_login: 0

+

+// Indicate if you want display the parse of the packets received in administration connection

+// It's useful for debug. Possible values: 0: no (default), 1: yes

+display_parse_admin: 0

+

+// Indicate if you want display the parse of the packets received from a char-server

+// It's useful for debug. Possible values: 0: no (default), 1: yes (without packet 0x2714), 2: all packets

+display_parse_fromchar: 0

+

+// Indicate how to display date in logs, to players, etc.

+// 0: 31-12-2004 23:59:59

+// 1: 12-31-2004 23:59:59

+// 2: 2004-31-12 23:59:59

+// 3: 2004-12-31 23:59:59 (default)

+date_format: 3

+

+// Indicate the minimum GM level of player that the server accepts to connection.

+// 0: all players (normal player are 0. it's default), 1-99: GM level at least with level x

+min_level_to_connect: 0

+

+// Give possibility to adjust (ladmin command: timeadd) the time of an unlimited account.

+// If set to on/1/yes..., the adjustment is be done from actual time to set the final time of the account.

+// If set to no/0/no..., the adjustment can not be done on an unlimited account. You must set (ladmin command: timeset) a final time before to adjust (ladmin command: timeadd)

+add_to_unlimited_account: off

+

+// Starting additional sec from now for the limited time at creation of account

+// -1: new account are created with UNlimited time (default value)

+// 0 or more: new accounts was created by addition of the value (in sec) to the actual time (to set first limited time)

+start_limited_time: -1

+

+// It's to check IP of a player between login-server and char-server (part of anti-hacking system)

+// If player doesn't have same IP, connection is refused.

+// Set to 0/off/no to not check IP of player.

+// Set to 1/on/yes if you want to check (default)

+// Note: if you enable this option, be sure that your (local/lan/wan) players use correct ip (in xml file) to contact servers,

+//       and that your LAN is correctly configured (!), and that LAN configuration of eathena is right.

+//       if not correct, you can read list of char-servers, but not look slots of characters (rejected by server).

+check_ip_flag: yes

+

+// Specify order of IP control if necessary (option: 'deny,allow', 'allow,deny', or 'mutual-failture')

+// (how to use 'allow' and 'deny' information)

+//order: allow,deny

+

+// Indicate the IP that the server accept.

+// put: 'all', or 'xxx.xxx.' (begin of an ip finished by '.' or a complete ip),

+//      or a network and its mask (example: '123.456.789.012/24' or '123.456.789.012/255.255.255.0')

+//      or 'clear' to suppress previous parameter (use it in import file mainly)

+// Add as many IP's as you wish.

+//allow: all

+

+// Indicate the IP that the server refuse.

+// Add as many IP's as you wish, as long as you put deny: before it.

+//deny: 123.123.123.123

+//deny: 234.234.234.234

+

+//Check The clientversion set in the clientinfo ?

+check_client_version: no

+

+//What version we would allow to connect? (if the options above is enabled..)

+client_version_to_connect: 20

+

+//Passwords in Login DB are MD5 - <passwordencrypt> cannot b used on client with this on

+use_MD5_passwords: no

+

+//Ban features: read readme for more info if you dont know this.

+ipban: 1

+dynamic_pass_failure_ban: 1

+dynamic_pass_failure_ban_time: 5

+dynamic_pass_failure_ban_how_many: 3

+dynamic_pass_failure_ban_how_long: 60

+dynamic_account_ban: 1

+dynamic_account_ban_class: 0

+

+import: conf/import/login_conf.txt