* Merged changes up to eAthena 15032.

git-svn-id: https://rathena.svn.sourceforge.net/svnroot/rathena/trunk@15065 54d463be-8e91-2dee-dedb-b68131a5f0ec

41 files changed, 1158 insertions, 966 deletions

diff --git a/3rdparty/pcre/include/pcre.h b/3rdparty/pcre/include/pcre.h
index e973396ba..42a109a65 100644
--- a/3rdparty/pcre/include/pcre.h
+++ b/3rdparty/pcre/include/pcre.h
@@ -5,7 +5,7 @@
 /* This is the public header file for the PCRE library, to be #included by
 applications that call the PCRE functions.
 
-           Copyright (c) 1997-2006 University of Cambridge
+           Copyright (c) 1997-2011 University of Cambridge
 
 -----------------------------------------------------------------------------
 Redistribution and use in source and binary forms, with or without
@@ -41,44 +41,46 @@ POSSIBILITY OF SUCH DAMAGE.
 
 /* The current PCRE version information. */
 
-/* NOTES FOR FUTURE MAINTAINERS: Do not use numbers with leading zeros, because
-they may be treated as octal constants. The PCRE_PRERELEASE feature is for
-identifying release candidates. It might be defined as -RC2, for example. In
-real releases, it should be defined empty. Do not change the alignment of these
-statments. The code in ./configure greps out the version numbers by using "cut"
-to get values from column 29 onwards. These are substituted into pcre-config
-and libpcre.pc. The values are not put into configure.ac and substituted here
-(which would simplify this issue) because that makes life harder for those who
-cannot run ./configure. As it now stands, this file need not be edited in that
-circumstance. */
-
-#define PCRE_MAJOR          7
-#define PCRE_MINOR          0
-#define PCRE_PRERELEASE
-#define PCRE_DATE           18-Dec-2006
-
-/* Win32 uses DLL by default; it needs special stuff for exported functions
-when building PCRE. */
-
-#ifdef _WIN32
-#  ifdef PCRE_DEFINITION
-#    ifdef DLL_EXPORT
-#      define PCRE_DATA_SCOPE __declspec(dllexport)
+#define PCRE_MAJOR          8
+#define PCRE_MINOR          20
+#define PCRE_PRERELEASE     
+#define PCRE_DATE           2011-10-21
+
+/* When an application links to a PCRE DLL in Windows, the symbols that are
+imported have to be identified as such. When building PCRE, the appropriate
+export setting is defined in pcre_internal.h, which includes this file. So we
+don't change existing definitions of PCRE_EXP_DECL and PCRECPP_EXP_DECL. */
+
+#if defined(_WIN32) && !defined(PCRE_STATIC)
+#  ifndef PCRE_EXP_DECL
+#    define PCRE_EXP_DECL  extern __declspec(dllimport)
+#  endif
+#  ifdef __cplusplus
+#    ifndef PCRECPP_EXP_DECL
+#      define PCRECPP_EXP_DECL  extern __declspec(dllimport)
 #    endif
-#  else
-#    ifndef PCRE_STATIC
-#      define PCRE_DATA_SCOPE extern __declspec(dllimport)
+#    ifndef PCRECPP_EXP_DEFN
+#      define PCRECPP_EXP_DEFN  __declspec(dllimport)
 #    endif
 #  endif
 #endif
 
-/* Otherwise, we use the standard "extern". */
+/* By default, we use the standard "extern" declarations. */
 
-#ifndef PCRE_DATA_SCOPE
+#ifndef PCRE_EXP_DECL
 #  ifdef __cplusplus
-#    define PCRE_DATA_SCOPE     extern "C"
+#    define PCRE_EXP_DECL  extern "C"
 #  else
-#    define PCRE_DATA_SCOPE     extern
+#    define PCRE_EXP_DECL  extern
+#  endif
+#endif
+
+#ifdef __cplusplus
+#  ifndef PCRECPP_EXP_DECL
+#    define PCRECPP_EXP_DECL  extern
+#  endif
+#  ifndef PCRECPP_EXP_DEFN
+#    define PCRECPP_EXP_DEFN
 #  endif
 #endif
 
@@ -93,32 +95,45 @@ it is needed here for malloc. */
 extern "C" {
 #endif
 
-/* Options */
-
-#define PCRE_CASELESS           0x00000001
-#define PCRE_MULTILINE          0x00000002
-#define PCRE_DOTALL             0x00000004
-#define PCRE_EXTENDED           0x00000008
-#define PCRE_ANCHORED           0x00000010
-#define PCRE_DOLLAR_ENDONLY     0x00000020
-#define PCRE_EXTRA              0x00000040
-#define PCRE_NOTBOL             0x00000080
-#define PCRE_NOTEOL             0x00000100
-#define PCRE_UNGREEDY           0x00000200
-#define PCRE_NOTEMPTY           0x00000400
-#define PCRE_UTF8               0x00000800
-#define PCRE_NO_AUTO_CAPTURE    0x00001000
-#define PCRE_NO_UTF8_CHECK      0x00002000
-#define PCRE_AUTO_CALLOUT       0x00004000
-#define PCRE_PARTIAL            0x00008000
-#define PCRE_DFA_SHORTEST       0x00010000
-#define PCRE_DFA_RESTART        0x00020000
-#define PCRE_FIRSTLINE          0x00040000
-#define PCRE_DUPNAMES           0x00080000
-#define PCRE_NEWLINE_CR         0x00100000
-#define PCRE_NEWLINE_LF         0x00200000
-#define PCRE_NEWLINE_CRLF       0x00300000
-#define PCRE_NEWLINE_ANY        0x00400000
+/* Options. Some are compile-time only, some are run-time only, and some are
+both, so we keep them all distinct. However, almost all the bits in the options
+word are now used. In the long run, we may have to re-use some of the
+compile-time only bits for runtime options, or vice versa. */
+
+#define PCRE_CASELESS           0x00000001  /* Compile */
+#define PCRE_MULTILINE          0x00000002  /* Compile */
+#define PCRE_DOTALL             0x00000004  /* Compile */
+#define PCRE_EXTENDED           0x00000008  /* Compile */
+#define PCRE_ANCHORED           0x00000010  /* Compile, exec, DFA exec */
+#define PCRE_DOLLAR_ENDONLY     0x00000020  /* Compile */
+#define PCRE_EXTRA              0x00000040  /* Compile */
+#define PCRE_NOTBOL             0x00000080  /* Exec, DFA exec */
+#define PCRE_NOTEOL             0x00000100  /* Exec, DFA exec */
+#define PCRE_UNGREEDY           0x00000200  /* Compile */
+#define PCRE_NOTEMPTY           0x00000400  /* Exec, DFA exec */
+#define PCRE_UTF8               0x00000800  /* Compile */
+#define PCRE_NO_AUTO_CAPTURE    0x00001000  /* Compile */
+#define PCRE_NO_UTF8_CHECK      0x00002000  /* Compile, exec, DFA exec */
+#define PCRE_AUTO_CALLOUT       0x00004000  /* Compile */
+#define PCRE_PARTIAL_SOFT       0x00008000  /* Exec, DFA exec */
+#define PCRE_PARTIAL            0x00008000  /* Backwards compatible synonym */
+#define PCRE_DFA_SHORTEST       0x00010000  /* DFA exec */
+#define PCRE_DFA_RESTART        0x00020000  /* DFA exec */
+#define PCRE_FIRSTLINE          0x00040000  /* Compile */
+#define PCRE_DUPNAMES           0x00080000  /* Compile */
+#define PCRE_NEWLINE_CR         0x00100000  /* Compile, exec, DFA exec */
+#define PCRE_NEWLINE_LF         0x00200000  /* Compile, exec, DFA exec */
+#define PCRE_NEWLINE_CRLF       0x00300000  /* Compile, exec, DFA exec */
+#define PCRE_NEWLINE_ANY        0x00400000  /* Compile, exec, DFA exec */
+#define PCRE_NEWLINE_ANYCRLF    0x00500000  /* Compile, exec, DFA exec */
+#define PCRE_BSR_ANYCRLF        0x00800000  /* Compile, exec, DFA exec */
+#define PCRE_BSR_UNICODE        0x01000000  /* Compile, exec, DFA exec */
+#define PCRE_JAVASCRIPT_COMPAT  0x02000000  /* Compile */
+#define PCRE_NO_START_OPTIMIZE  0x04000000  /* Compile, exec, DFA exec */
+#define PCRE_NO_START_OPTIMISE  0x04000000  /* Synonym */
+#define PCRE_PARTIAL_HARD       0x08000000  /* Exec, DFA exec */
+#define PCRE_NOTEMPTY_ATSTART   0x10000000  /* Exec, DFA exec */
+#define PCRE_UCP                0x20000000  /* Compile */
 
 /* Exec-time and get/set-time error codes */
 
@@ -144,8 +159,37 @@ extern "C" {
 #define PCRE_ERROR_DFA_WSSIZE     (-19)
 #define PCRE_ERROR_DFA_RECURSE    (-20)
 #define PCRE_ERROR_RECURSIONLIMIT (-21)
-#define PCRE_ERROR_NULLWSLIMIT    (-22)
+#define PCRE_ERROR_NULLWSLIMIT    (-22)  /* No longer actually used */
 #define PCRE_ERROR_BADNEWLINE     (-23)
+#define PCRE_ERROR_BADOFFSET      (-24)
+#define PCRE_ERROR_SHORTUTF8      (-25)
+#define PCRE_ERROR_RECURSELOOP    (-26)
+#define PCRE_ERROR_JIT_STACKLIMIT (-27)
+
+/* Specific error codes for UTF-8 validity checks */
+
+#define PCRE_UTF8_ERR0               0
+#define PCRE_UTF8_ERR1               1
+#define PCRE_UTF8_ERR2               2
+#define PCRE_UTF8_ERR3               3
+#define PCRE_UTF8_ERR4               4
+#define PCRE_UTF8_ERR5               5
+#define PCRE_UTF8_ERR6               6
+#define PCRE_UTF8_ERR7               7
+#define PCRE_UTF8_ERR8               8
+#define PCRE_UTF8_ERR9               9
+#define PCRE_UTF8_ERR10             10
+#define PCRE_UTF8_ERR11             11
+#define PCRE_UTF8_ERR12             12
+#define PCRE_UTF8_ERR13             13
+#define PCRE_UTF8_ERR14             14
+#define PCRE_UTF8_ERR15             15
+#define PCRE_UTF8_ERR16             16
+#define PCRE_UTF8_ERR17             17
+#define PCRE_UTF8_ERR18             18
+#define PCRE_UTF8_ERR19             19
+#define PCRE_UTF8_ERR20             20
+#define PCRE_UTF8_ERR21             21
 
 /* Request types for pcre_fullinfo() */
 
@@ -162,6 +206,11 @@ extern "C" {
 #define PCRE_INFO_NAMETABLE          9
 #define PCRE_INFO_STUDYSIZE         10
 #define PCRE_INFO_DEFAULT_TABLES    11
+#define PCRE_INFO_OKPARTIAL         12
+#define PCRE_INFO_JCHANGED          13
+#define PCRE_INFO_HASCRORLF         14
+#define PCRE_INFO_MINLENGTH         15
+#define PCRE_INFO_JIT               16
 
 /* Request types for pcre_config(). Do not re-arrange, in order to remain
 compatible. */
@@ -174,6 +223,13 @@ compatible. */
 #define PCRE_CONFIG_STACKRECURSE            5
 #define PCRE_CONFIG_UNICODE_PROPERTIES      6
 #define PCRE_CONFIG_MATCH_LIMIT_RECURSION   7
+#define PCRE_CONFIG_BSR                     8
+#define PCRE_CONFIG_JIT                     9
+
+/* Request types for pcre_study(). Do not re-arrange, in order to remain
+compatible. */
+
+#define PCRE_STUDY_JIT_COMPILE            0x0001
 
 /* Bit flags for the pcre_extra structure. Do not re-arrange or redefine
 these bits, just add new ones on the end, in order to remain compatible. */
@@ -183,12 +239,17 @@ these bits, just add new ones on the end, in order to remain compatible. */
 #define PCRE_EXTRA_CALLOUT_DATA           0x0004
 #define PCRE_EXTRA_TABLES                 0x0008
 #define PCRE_EXTRA_MATCH_LIMIT_RECURSION  0x0010
+#define PCRE_EXTRA_MARK                   0x0020
+#define PCRE_EXTRA_EXECUTABLE_JIT         0x0040
 
 /* Types */
 
 struct real_pcre;                 /* declaration; the definition is private  */
 typedef struct real_pcre pcre;
 
+struct real_pcre_jit_stack;       /* declaration; the definition is private  */
+typedef struct real_pcre_jit_stack pcre_jit_stack;
+
 /* When PCRE is compiled as a C++ library, the subject pointer type can be
 replaced with a custom type. For conventional use, the public interface is a
 const char *. */
@@ -208,6 +269,8 @@ typedef struct pcre_extra {
   void *callout_data;             /* Data passed back in callouts */
   const unsigned char *tables;    /* Pointer to character tables */
   unsigned long int match_limit_recursion; /* Max recursive calls to match() */
+  unsigned char **mark;           /* For passing back a mark pointer */
+  void *executable_jit;           /* Contains a pointer to a compiled jit code */
 } pcre_extra;
 
 /* The structure for passing out data via the pcre_callout_function. We use a
@@ -230,6 +293,8 @@ typedef struct pcre_callout_block {
   /* ------------------- Added for Version 1 -------------------------- */
   int          pattern_position;  /* Offset to next item in the pattern */
   int          next_item_length;  /* Length of next item in the pattern */
+  /* ------------------- Added for Version 2 -------------------------- */
+  const unsigned char *mark;      /* Pointer to current mark or NULL    */
   /* ------------------------------------------------------------------ */
 } pcre_callout_block;
 
@@ -240,52 +305,63 @@ that is triggered by the (?) regex item. For Virtual Pascal, these definitions
 have to take another form. */
 
 #ifndef VPCOMPAT
-PCRE_DATA_SCOPE void *(*pcre_malloc)(size_t);
-PCRE_DATA_SCOPE void  (*pcre_free)(void *);
-PCRE_DATA_SCOPE void *(*pcre_stack_malloc)(size_t);
-PCRE_DATA_SCOPE void  (*pcre_stack_free)(void *);
-PCRE_DATA_SCOPE int   (*pcre_callout)(pcre_callout_block *);
+PCRE_EXP_DECL void *(*pcre_malloc)(size_t);
+PCRE_EXP_DECL void  (*pcre_free)(void *);
+PCRE_EXP_DECL void *(*pcre_stack_malloc)(size_t);
+PCRE_EXP_DECL void  (*pcre_stack_free)(void *);
+PCRE_EXP_DECL int   (*pcre_callout)(pcre_callout_block *);
 #else   /* VPCOMPAT */
-PCRE_DATA_SCOPE void *pcre_malloc(size_t);
-PCRE_DATA_SCOPE void  pcre_free(void *);
-PCRE_DATA_SCOPE void *pcre_stack_malloc(size_t);
-PCRE_DATA_SCOPE void  pcre_stack_free(void *);
-PCRE_DATA_SCOPE int   pcre_callout(pcre_callout_block *);
+PCRE_EXP_DECL void *pcre_malloc(size_t);
+PCRE_EXP_DECL void  pcre_free(void *);
+PCRE_EXP_DECL void *pcre_stack_malloc(size_t);
+PCRE_EXP_DECL void  pcre_stack_free(void *);
+PCRE_EXP_DECL int   pcre_callout(pcre_callout_block *);
 #endif  /* VPCOMPAT */
 
+/* User defined callback which provides a stack just before the match starts. */
+
+typedef pcre_jit_stack *(*pcre_jit_callback)(void *);
+
 /* Exported PCRE functions */
 
-PCRE_DATA_SCOPE pcre *pcre_compile(const char *, int, const char **, int *,
+PCRE_EXP_DECL pcre *pcre_compile(const char *, int, const char **, int *,
                   const unsigned char *);
-PCRE_DATA_SCOPE pcre *pcre_compile2(const char *, int, int *, const char **,
+PCRE_EXP_DECL pcre *pcre_compile2(const char *, int, int *, const char **,
                   int *, const unsigned char *);
-PCRE_DATA_SCOPE int  pcre_config(int, void *);
-PCRE_DATA_SCOPE int  pcre_copy_named_substring(const pcre *, const char *,
+PCRE_EXP_DECL int  pcre_config(int, void *);
+PCRE_EXP_DECL int  pcre_copy_named_substring(const pcre *, const char *,
                   int *, int, const char *, char *, int);
-PCRE_DATA_SCOPE int  pcre_copy_substring(const char *, int *, int, int, char *,
+PCRE_EXP_DECL int  pcre_copy_substring(const char *, int *, int, int, char *,
                   int);
-PCRE_DATA_SCOPE int  pcre_dfa_exec(const pcre *, const pcre_extra *,
+PCRE_EXP_DECL int  pcre_dfa_exec(const pcre *, const pcre_extra *,
                   const char *, int, int, int, int *, int , int *, int);
-PCRE_DATA_SCOPE int  pcre_exec(const pcre *, const pcre_extra *, PCRE_SPTR,
+PCRE_EXP_DECL int  pcre_exec(const pcre *, const pcre_extra *, PCRE_SPTR,
                    int, int, int, int *, int);
-PCRE_DATA_SCOPE void pcre_free_substring(const char *);
-PCRE_DATA_SCOPE void pcre_free_substring_list(const char **);
-PCRE_DATA_SCOPE int  pcre_fullinfo(const pcre *, const pcre_extra *, int,
+PCRE_EXP_DECL void pcre_free_substring(const char *);
+PCRE_EXP_DECL void pcre_free_substring_list(const char **);
+PCRE_EXP_DECL int  pcre_fullinfo(const pcre *, const pcre_extra *, int,
                   void *);
-PCRE_DATA_SCOPE int  pcre_get_named_substring(const pcre *, const char *,
+PCRE_EXP_DECL int  pcre_get_named_substring(const pcre *, const char *,
                   int *, int, const char *, const char **);
-PCRE_DATA_SCOPE int  pcre_get_stringnumber(const pcre *, const char *);
-PCRE_DATA_SCOPE int  pcre_get_stringtable_entries(const pcre *, const char *,
+PCRE_EXP_DECL int  pcre_get_stringnumber(const pcre *, const char *);
+PCRE_EXP_DECL int  pcre_get_stringtable_entries(const pcre *, const char *,
                   char **, char **);
-PCRE_DATA_SCOPE int  pcre_get_substring(const char *, int *, int, int,
+PCRE_EXP_DECL int  pcre_get_substring(const char *, int *, int, int,
                   const char **);
-PCRE_DATA_SCOPE int  pcre_get_substring_list(const char *, int *, int,
+PCRE_EXP_DECL int  pcre_get_substring_list(const char *, int *, int,
                   const char ***);
-PCRE_DATA_SCOPE int  pcre_info(const pcre *, int *, int *);
-PCRE_DATA_SCOPE const unsigned char *pcre_maketables(void);
-PCRE_DATA_SCOPE int  pcre_refcount(pcre *, int);
-PCRE_DATA_SCOPE pcre_extra *pcre_study(const pcre *, int, const char **);
-PCRE_DATA_SCOPE const char *pcre_version(void);
+PCRE_EXP_DECL int  pcre_info(const pcre *, int *, int *);
+PCRE_EXP_DECL const unsigned char *pcre_maketables(void);
+PCRE_EXP_DECL int  pcre_refcount(pcre *, int);
+PCRE_EXP_DECL pcre_extra *pcre_study(const pcre *, int, const char **);
+PCRE_EXP_DECL void pcre_free_study(pcre_extra *);
+PCRE_EXP_DECL const char *pcre_version(void);
+
+/* JIT compiler related functions. */
+
+PCRE_EXP_DECL pcre_jit_stack *pcre_jit_stack_alloc(int, int);
+PCRE_EXP_DECL void pcre_jit_stack_free(pcre_jit_stack *);
+PCRE_EXP_DECL void pcre_assign_jit_stack(pcre_extra *, pcre_jit_callback, void *);
 
 #ifdef __cplusplus
 }  /* extern "C" */
diff --git a/3rdparty/pcre/lib/libpcre.dll.a b/3rdparty/pcre/lib/libpcre.dll.a
index fe69e4e57..d82c1f28b 100644
--- a/3rdparty/pcre/lib/libpcre.dll.a
+++ b/3rdparty/pcre/lib/libpcre.dll.a
diff --git a/3rdparty/pcre/lib/pcre.lib b/3rdparty/pcre/lib/pcre.lib
index 37b4084ef..1024ec4a5 100644
--- a/3rdparty/pcre/lib/pcre.lib
+++ b/3rdparty/pcre/lib/pcre.lib
diff --git a/3rdparty/pcre/pcre-7.0 b/3rdparty/pcre/pcre-8.20
index e69de29bb..e69de29bb 100644
--- a/3rdparty/pcre/pcre-7.0
+++ b/3rdparty/pcre/pcre-8.20
diff --git a/3rdparty/zlib/include/zconf.h b/3rdparty/zlib/include/zconf.h
index 03a9431c8..02ce56c43 100644
--- a/3rdparty/zlib/include/zconf.h
+++ b/3rdparty/zlib/include/zconf.h
@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * Copyright (C) 1995-2010 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -11,52 +11,124 @@
 /*
  * If you *really* need a unique prefix for all types and library functions,
  * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
  */
-#ifdef Z_PREFIX
-#  define deflateInit_          z_deflateInit_
+#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+
+/* all linked symbols */
+#  define _dist_code            z__dist_code
+#  define _length_code          z__length_code
+#  define _tr_align             z__tr_align
+#  define _tr_flush_block       z__tr_flush_block
+#  define _tr_init              z__tr_init
+#  define _tr_stored_block      z__tr_stored_block
+#  define _tr_tally             z__tr_tally
+#  define adler32               z_adler32
+#  define adler32_combine       z_adler32_combine
+#  define adler32_combine64     z_adler32_combine64
+#  define compress              z_compress
+#  define compress2             z_compress2
+#  define compressBound         z_compressBound
+#  define crc32                 z_crc32
+#  define crc32_combine         z_crc32_combine
+#  define crc32_combine64       z_crc32_combine64
 #  define deflate               z_deflate
+#  define deflateBound          z_deflateBound
+#  define deflateCopy           z_deflateCopy
 #  define deflateEnd            z_deflateEnd
-#  define inflateInit_          z_inflateInit_
-#  define inflate               z_inflate
-#  define inflateEnd            z_inflateEnd
 #  define deflateInit2_         z_deflateInit2_
-#  define deflateSetDictionary  z_deflateSetDictionary
-#  define deflateCopy           z_deflateCopy
-#  define deflateReset          z_deflateReset
+#  define deflateInit_          z_deflateInit_
 #  define deflateParams         z_deflateParams
-#  define deflateBound          z_deflateBound
 #  define deflatePrime          z_deflatePrime
+#  define deflateReset          z_deflateReset
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateSetHeader      z_deflateSetHeader
+#  define deflateTune           z_deflateTune
+#  define deflate_copyright     z_deflate_copyright
+#  define get_crc_table         z_get_crc_table
+#  define gz_error              z_gz_error
+#  define gz_intmax             z_gz_intmax
+#  define gz_strwinerror        z_gz_strwinerror
+#  define gzbuffer              z_gzbuffer
+#  define gzclearerr            z_gzclearerr
+#  define gzclose               z_gzclose
+#  define gzclose_r             z_gzclose_r
+#  define gzclose_w             z_gzclose_w
+#  define gzdirect              z_gzdirect
+#  define gzdopen               z_gzdopen
+#  define gzeof                 z_gzeof
+#  define gzerror               z_gzerror
+#  define gzflush               z_gzflush
+#  define gzgetc                z_gzgetc
+#  define gzgets                z_gzgets
+#  define gzoffset              z_gzoffset
+#  define gzoffset64            z_gzoffset64
+#  define gzopen                z_gzopen
+#  define gzopen64              z_gzopen64
+#  define gzprintf              z_gzprintf
+#  define gzputc                z_gzputc
+#  define gzputs                z_gzputs
+#  define gzread                z_gzread
+#  define gzrewind              z_gzrewind
+#  define gzseek                z_gzseek
+#  define gzseek64              z_gzseek64
+#  define gzsetparams           z_gzsetparams
+#  define gztell                z_gztell
+#  define gztell64              z_gztell64
+#  define gzungetc              z_gzungetc
+#  define gzwrite               z_gzwrite
+#  define inflate               z_inflate
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define inflateBackInit_      z_inflateBackInit_
+#  define inflateCopy           z_inflateCopy
+#  define inflateEnd            z_inflateEnd
+#  define inflateGetHeader      z_inflateGetHeader
 #  define inflateInit2_         z_inflateInit2_
+#  define inflateInit_          z_inflateInit_
+#  define inflateMark           z_inflateMark
+#  define inflatePrime          z_inflatePrime
+#  define inflateReset          z_inflateReset
+#  define inflateReset2         z_inflateReset2
 #  define inflateSetDictionary  z_inflateSetDictionary
 #  define inflateSync           z_inflateSync
 #  define inflateSyncPoint      z_inflateSyncPoint
-#  define inflateCopy           z_inflateCopy
-#  define inflateReset          z_inflateReset
-#  define inflateBack           z_inflateBack
-#  define inflateBackEnd        z_inflateBackEnd
-#  define compress              z_compress
-#  define compress2             z_compress2
-#  define compressBound         z_compressBound
+#  define inflateUndermine      z_inflateUndermine
+#  define inflate_copyright     z_inflate_copyright
+#  define inflate_fast          z_inflate_fast
+#  define inflate_table         z_inflate_table
 #  define uncompress            z_uncompress
-#  define adler32               z_adler32
-#  define crc32                 z_crc32
-#  define get_crc_table         z_get_crc_table
 #  define zError                z_zError
+#  define zcalloc               z_zcalloc
+#  define zcfree                z_zcfree
+#  define zlibCompileFlags      z_zlibCompileFlags
+#  define zlibVersion           z_zlibVersion
 
+/* all zlib typedefs in zlib.h and zconf.h */
+#  define Byte                  z_Byte
+#  define Bytef                 z_Bytef
 #  define alloc_func            z_alloc_func
+#  define charf                 z_charf
 #  define free_func             z_free_func
+#  define gzFile                z_gzFile
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
 #  define in_func               z_in_func
+#  define intf                  z_intf
 #  define out_func              z_out_func
-#  define Byte                  z_Byte
 #  define uInt                  z_uInt
-#  define uLong                 z_uLong
-#  define Bytef                 z_Bytef
-#  define charf                 z_charf
-#  define intf                  z_intf
 #  define uIntf                 z_uIntf
+#  define uLong                 z_uLong
 #  define uLongf                z_uLongf
-#  define voidpf                z_voidpf
 #  define voidp                 z_voidp
+#  define voidpc                z_voidpc
+#  define voidpf                z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+#  define gz_header_s           z_gz_header_s
+#  define internal_state        z_internal_state
+
 #endif
 
 #if defined(__MSDOS__) && !defined(MSDOS)
@@ -284,49 +356,73 @@ typedef uLong FAR uLongf;
    typedef Byte       *voidp;
 #endif
 
-#if 0           /* HAVE_UNISTD_H -- this line is updated by ./configure */
-#  include <sys/types.h> /* for off_t */
-#  include <unistd.h>    /* for SEEK_* and off_t */
+#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef STDC
+#  include <sys/types.h>    /* for off_t */
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#  include <unistd.h>       /* for SEEK_* and off_t */
 #  ifdef VMS
-#    include <unixio.h>   /* for off_t */
+#    include <unixio.h>     /* for off_t */
+#  endif
+#  ifndef z_off_t
+#    define z_off_t off_t
 #  endif
-#  define z_off_t off_t
 #endif
+
 #ifndef SEEK_SET
 #  define SEEK_SET        0       /* Seek from beginning of file.  */
 #  define SEEK_CUR        1       /* Seek from current position.  */
 #  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
 #endif
+
 #ifndef z_off_t
 #  define z_off_t long
 #endif
 
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define z_off64_t off64_t
+#else
+#  define z_off64_t z_off_t
+#endif
+
 #if defined(__OS400__)
 #  define NO_vsnprintf
 #endif
 
 #if defined(__MVS__)
 #  define NO_vsnprintf
-#  ifdef FAR
-#    undef FAR
-#  endif
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */
 #if defined(__MVS__)
-#   pragma map(deflateInit_,"DEIN")
-#   pragma map(deflateInit2_,"DEIN2")
-#   pragma map(deflateEnd,"DEEND")
-#   pragma map(deflateBound,"DEBND")
-#   pragma map(inflateInit_,"ININ")
-#   pragma map(inflateInit2_,"ININ2")
-#   pragma map(inflateEnd,"INEND")
-#   pragma map(inflateSync,"INSY")
-#   pragma map(inflateSetDictionary,"INSEDI")
-#   pragma map(compressBound,"CMBND")
-#   pragma map(inflate_table,"INTABL")
-#   pragma map(inflate_fast,"INFA")
-#   pragma map(inflate_copyright,"INCOPY")
+  #pragma map(deflateInit_,"DEIN")
+  #pragma map(deflateInit2_,"DEIN2")
+  #pragma map(deflateEnd,"DEEND")
+  #pragma map(deflateBound,"DEBND")
+  #pragma map(inflateInit_,"ININ")
+  #pragma map(inflateInit2_,"ININ2")
+  #pragma map(inflateEnd,"INEND")
+  #pragma map(inflateSync,"INSY")
+  #pragma map(inflateSetDictionary,"INSEDI")
+  #pragma map(compressBound,"CMBND")
+  #pragma map(inflate_table,"INTABL")
+  #pragma map(inflate_fast,"INFA")
+  #pragma map(inflate_copyright,"INCOPY")
 #endif
 
 #endif /* ZCONF_H */
diff --git a/3rdparty/zlib/include/zlib.h b/3rdparty/zlib/include/zlib.h
index 022817927..bfbba83e8 100644
--- a/3rdparty/zlib/include/zlib.h
+++ b/3rdparty/zlib/include/zlib.h
@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.3, July 18th, 2005
+  version 1.2.5, April 19th, 2010
 
-  Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -37,41 +37,44 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.3"
-#define ZLIB_VERNUM 0x1230
+#define ZLIB_VERSION "1.2.5"
+#define ZLIB_VERNUM 0x1250
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 5
+#define ZLIB_VER_SUBREVISION 0
 
 /*
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms will be added later and will have the same
-  stream interface.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
+    The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed data.
+  This version of the library supports only one compression method (deflation)
+  but other algorithms will be added later and will have the same stream
+  interface.
+
+    Compression can be done in a single step if the buffers are large enough,
+  or can be done by repeated calls of the compression function.  In the latter
+  case, the application must provide more input and/or consume the output
   (providing more output space) before each call.
 
-     The compressed data format used by default by the in-memory functions is
+    The compressed data format used by default by the in-memory functions is
   the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
   around a deflate stream, which is itself documented in RFC 1951.
 
-     The library also supports reading and writing files in gzip (.gz) format
+    The library also supports reading and writing files in gzip (.gz) format
   with an interface similar to that of stdio using the functions that start
   with "gz".  The gzip format is different from the zlib format.  gzip is a
   gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
 
-     This library can optionally read and write gzip streams in memory as well.
+    This library can optionally read and write gzip streams in memory as well.
 
-     The zlib format was designed to be compact and fast for use in memory
+    The zlib format was designed to be compact and fast for use in memory
   and on communications channels.  The gzip format was designed for single-
   file compression on file systems, has a larger header than zlib to maintain
   directory information, and uses a different, slower check method than zlib.
 
-     The library does not install any signal handler. The decoder checks
-  the consistency of the compressed data, so the library should never
-  crash even in case of corrupted input.
+    The library does not install any signal handler.  The decoder checks
+  the consistency of the compressed data, so the library should never crash
+  even in case of corrupted input.
 */
 
 typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
@@ -126,45 +129,45 @@ typedef struct gz_header_s {
 typedef gz_header FAR *gz_headerp;
 
 /*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
+     The application must update next_in and avail_in when avail_in has dropped
+   to zero.  It must update next_out and avail_out when avail_out has dropped
+   to zero.  The application must initialize zalloc, zfree and opaque before
+   calling the init function.  All other fields are set by the compression
+   library and must not be updated by the application.
+
+     The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree.  This can be useful for custom
+   memory management.  The compression library attaches no meaning to the
    opaque value.
 
-   zalloc must return Z_NULL if there is not enough memory for the object.
+     zalloc must return Z_NULL if there is not enough memory for the object.
    If zlib is used in a multi-threaded application, zalloc and zfree must be
    thread safe.
 
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
+     On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this if
+   the symbol MAXSEG_64K is defined (see zconf.h).  WARNING: On MSDOS, pointers
+   returned by zalloc for objects of exactly 65536 bytes *must* have their
+   offset normalized to zero.  The default allocation function provided by this
+   library ensures this (see zutil.c).  To reduce memory requirements and avoid
+   any allocation of 64K objects, at the expense of compression ratio, compile
+   the library with -DMAX_WBITS=14 (see zconf.h).
+
+     The fields total_in and total_out can be used for statistics or progress
+   reports.  After compression, total_in holds the total size of the
+   uncompressed data and may be saved for use in the decompressor (particularly
+   if the decompressor wants to decompress everything in a single step).
 */
 
                         /* constants */
 
 #define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_PARTIAL_FLUSH 1
 #define Z_SYNC_FLUSH    2
 #define Z_FULL_FLUSH    3
 #define Z_FINISH        4
 #define Z_BLOCK         5
+#define Z_TREES         6
 /* Allowed flush values; see deflate() and inflate() below for details */
 
 #define Z_OK            0
@@ -176,8 +179,8 @@ typedef gz_header FAR *gz_headerp;
 #define Z_MEM_ERROR    (-4)
 #define Z_BUF_ERROR    (-5)
 #define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
  */
 
 #define Z_NO_COMPRESSION         0
@@ -207,119 +210,140 @@ typedef gz_header FAR *gz_headerp;
 #define zlib_version zlibVersion()
 /* for compatibility with versions < 1.0.2 */
 
+
                         /* basic functions */
 
 ZEXTERN const char * ZEXPORT zlibVersion OF((void));
 /* The application can compare zlibVersion and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
-   This check is automatically made by deflateInit and inflateInit.
+   If the first character differs, the library code actually used is not
+   compatible with the zlib.h header file used by the application.  This check
+   is automatically made by deflateInit and inflateInit.
  */
 
 /*
 ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
 
-     Initializes the internal stream state for compression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.
-   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
-   use default allocation functions.
+     Initializes the internal stream state for compression.  The fields
+   zalloc, zfree and opaque must be initialized before by the caller.  If
+   zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+   allocation functions.
 
      The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
-   1 gives best speed, 9 gives best compression, 0 gives no compression at
-   all (the input data is simply copied a block at a time).
-   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
-   compression (currently equivalent to level 6).
+   1 gives best speed, 9 gives best compression, 0 gives no compression at all
+   (the input data is simply copied a block at a time).  Z_DEFAULT_COMPRESSION
+   requests a default compromise between speed and compression (currently
+   equivalent to level 6).
 
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if level is not a valid compression level, or
    Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
-   with the version assumed by the caller (ZLIB_VERSION).
-   msg is set to null if there is no error message.  deflateInit does not
-   perform any compression: this will be done by deflate().
+   with the version assumed by the caller (ZLIB_VERSION).  msg is set to null
+   if there is no error message.  deflateInit does not perform any compression:
+   this will be done by deflate().
 */
 
 
 ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
 /*
     deflate compresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full. It may introduce some
-  output latency (reading input without producing any output) except when
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
   forced to flush.
 
-    The detailed semantics are as follows. deflate performs one or both of the
+    The detailed semantics are as follows.  deflate performs one or both of the
   following actions:
 
   - Compress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
+    accordingly.  If not all input can be processed (because there is not
     enough room in the output buffer), next_in and avail_in are updated and
     processing will resume at this point for the next call of deflate().
 
   - Provide more output starting at next_out and update next_out and avail_out
-    accordingly. This action is forced if the parameter flush is non zero.
+    accordingly.  This action is forced if the parameter flush is non zero.
     Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).
-    Some output may be provided even if flush is not set.
-
-  Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating avail_in or avail_out accordingly; avail_out
-  should never be zero before the call. The application can consume the
-  compressed output when it wants, for example when the output buffer is full
-  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
-  and with zero avail_out, it must be called again after making room in the
-  output buffer because there might be more output pending.
+    should be set only when necessary (in interactive applications).  Some
+    output may be provided even if flush is not set.
+
+    Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating avail_in or avail_out accordingly; avail_out should
+  never be zero before the call.  The application can consume the compressed
+  output when it wants, for example when the output buffer is full (avail_out
+  == 0), or after each call of deflate().  If deflate returns Z_OK and with
+  zero avail_out, it must be called again after making room in the output
+  buffer because there might be more output pending.
 
     Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
-  decide how much data to accumualte before producing output, in order to
+  decide how much data to accumulate before producing output, in order to
   maximize compression.
 
     If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
   flushed to the output buffer and the output is aligned on a byte boundary, so
-  that the decompressor can get all input data available so far. (In particular
-  avail_in is zero after the call if enough output space has been provided
-  before the call.)  Flushing may degrade compression for some compression
-  algorithms and so it should be used only when necessary.
+  that the decompressor can get all input data available so far.  (In
+  particular avail_in is zero after the call if enough output space has been
+  provided before the call.) Flushing may degrade compression for some
+  compression algorithms and so it should be used only when necessary.  This
+  completes the current deflate block and follows it with an empty stored block
+  that is three bits plus filler bits to the next byte, followed by four bytes
+  (00 00 ff ff).
+
+    If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+  output buffer, but the output is not aligned to a byte boundary.  All of the
+  input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+  This completes the current deflate block and follows it with an empty fixed
+  codes block that is 10 bits long.  This assures that enough bytes are output
+  in order for the decompressor to finish the block before the empty fixed code
+  block.
+
+    If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+  for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+  seven bits of the current block are held to be written as the next byte after
+  the next deflate block is completed.  In this case, the decompressor may not
+  be provided enough bits at this point in order to complete decompression of
+  the data provided so far to the compressor.  It may need to wait for the next
+  block to be emitted.  This is for advanced applications that need to control
+  the emission of deflate blocks.
 
     If flush is set to Z_FULL_FLUSH, all output is flushed as with
   Z_SYNC_FLUSH, and the compression state is reset so that decompression can
   restart from this point if previous compressed data has been damaged or if
-  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+  random access is desired.  Using Z_FULL_FLUSH too often can seriously degrade
   compression.
 
     If deflate returns with avail_out == 0, this function must be called again
   with the same value of the flush parameter and more output space (updated
   avail_out), until the flush is complete (deflate returns with non-zero
-  avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+  avail_out).  In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
   avail_out is greater than six to avoid repeated flush markers due to
   avail_out == 0 on return.
 
     If the parameter flush is set to Z_FINISH, pending input is processed,
-  pending output is flushed and deflate returns with Z_STREAM_END if there
-  was enough output space; if deflate returns with Z_OK, this function must be
+  pending output is flushed and deflate returns with Z_STREAM_END if there was
+  enough output space; if deflate returns with Z_OK, this function must be
   called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error. After
-  deflate has returned Z_STREAM_END, the only possible operations on the
-  stream are deflateReset or deflateEnd.
+  more input data, until it returns with Z_STREAM_END or an error.  After
+  deflate has returned Z_STREAM_END, the only possible operations on the stream
+  are deflateReset or deflateEnd.
 
     Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step. In this case, avail_out must be at least
-  the value returned by deflateBound (see below). If deflate does not return
+  is to be done in a single step.  In this case, avail_out must be at least the
+  value returned by deflateBound (see below).  If deflate does not return
   Z_STREAM_END, then it must be called again as described above.
 
     deflate() sets strm->adler to the adler32 checksum of all input read
   so far (that is, total_in bytes).
 
     deflate() may update strm->data_type if it can make a good guess about
-  the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
-  binary. This field is only for information purposes and does not affect
-  the compression algorithm in any manner.
+  the input data type (Z_BINARY or Z_TEXT).  In doubt, the data is considered
+  binary.  This field is only for information purposes and does not affect the
+  compression algorithm in any manner.
 
     deflate() returns Z_OK if some progress has been made (more input
   processed or more output produced), Z_STREAM_END if all input has been
   consumed and all output has been produced (only when flush is set to
   Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
-  (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
+  if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
+  (for example avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not
   fatal, and deflate() can be called again with more input and more output
   space to continue compressing.
 */
@@ -328,13 +352,13 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
 ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
 /*
      All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
+   This function discards any unprocessed input and does not flush any pending
+   output.
 
      deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
    stream state was inconsistent, Z_DATA_ERROR if the stream was freed
-   prematurely (some input or output was discarded). In the error case,
-   msg may be set but then points to a static string (which must not be
+   prematurely (some input or output was discarded).  In the error case, msg
+   may be set but then points to a static string (which must not be
    deallocated).
 */
 
@@ -342,10 +366,10 @@ ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
 /*
 ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
 
-     Initializes the internal stream state for decompression. The fields
+     Initializes the internal stream state for decompression.  The fields
    next_in, avail_in, zalloc, zfree and opaque must be initialized before by
-   the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
-   value depends on the compression method), inflateInit determines the
+   the caller.  If next_in is not Z_NULL and avail_in is large enough (the
+   exact value depends on the compression method), inflateInit determines the
    compression method from the zlib header and allocates all data structures
    accordingly; otherwise the allocation will be deferred to the first call of
    inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
@@ -353,95 +377,108 @@ ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
 
      inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
-   version assumed by the caller.  msg is set to null if there is no error
-   message. inflateInit does not perform any decompression apart from reading
-   the zlib header if present: this will be done by inflate().  (So next_in and
-   avail_in may be modified, but next_out and avail_out are unchanged.)
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit() does not process any header information -- that is deferred
+   until inflate() is called.
 */
 
 
 ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
 /*
     inflate decompresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full. It may introduce
+  buffer becomes empty or the output buffer becomes full.  It may introduce
   some output latency (reading input without producing any output) except when
   forced to flush.
 
-  The detailed semantics are as follows. inflate performs one or both of the
+  The detailed semantics are as follows.  inflate performs one or both of the
   following actions:
 
   - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), next_in is updated and processing will
+    resume at this point for the next call of inflate().
 
   - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() provides as much output as possible, until there
-    is no more input data or no more space in the output buffer (see below
-    about the flush parameter).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
-  must be called again after making room in the output buffer because there
-  might be more output pending.
-
-    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
-  Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
-  output as possible to the output buffer. Z_BLOCK requests that inflate() stop
-  if and when it gets to the next deflate block boundary. When decoding the
-  zlib or gzip format, this will cause inflate() to return immediately after
-  the header and before the first block. When doing a raw inflate, inflate()
-  will go ahead and process the first block, and will return when it gets to
-  the end of that block, or when it runs out of data.
+    accordingly.  inflate() provides as much output as possible, until there is
+    no more input data or no more space in the output buffer (see below about
+    the flush parameter).
+
+    Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating the next_* and avail_* values accordingly.  The
+  application can consume the uncompressed output when it wants, for example
+  when the output buffer is full (avail_out == 0), or after each call of
+  inflate().  If inflate returns Z_OK and with zero avail_out, it must be
+  called again after making room in the output buffer because there might be
+  more output pending.
+
+    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+  Z_BLOCK, or Z_TREES.  Z_SYNC_FLUSH requests that inflate() flush as much
+  output as possible to the output buffer.  Z_BLOCK requests that inflate()
+  stop if and when it gets to the next deflate block boundary.  When decoding
+  the zlib or gzip format, this will cause inflate() to return immediately
+  after the header and before the first block.  When doing a raw inflate,
+  inflate() will go ahead and process the first block, and will return when it
+  gets to the end of that block, or when it runs out of data.
 
     The Z_BLOCK option assists in appending to or combining deflate streams.
   Also to assist in this, on return inflate() will set strm->data_type to the
-  number of unused bits in the last byte taken from strm->next_in, plus 64
-  if inflate() is currently decoding the last block in the deflate stream,
-  plus 128 if inflate() returned immediately after decoding an end-of-block
-  code or decoding the complete header up to just before the first byte of the
-  deflate stream. The end-of-block will not be indicated until all of the
-  uncompressed data from that block has been written to strm->next_out.  The
-  number of unused bits may in general be greater than seven, except when
-  bit 7 of data_type is set, in which case the number of unused bits will be
-  less than eight.
+  number of unused bits in the last byte taken from strm->next_in, plus 64 if
+  inflate() is currently decoding the last block in the deflate stream, plus
+  128 if inflate() returned immediately after decoding an end-of-block code or
+  decoding the complete header up to just before the first byte of the deflate
+  stream.  The end-of-block will not be indicated until all of the uncompressed
+  data from that block has been written to strm->next_out.  The number of
+  unused bits may in general be greater than seven, except when bit 7 of
+  data_type is set, in which case the number of unused bits will be less than
+  eight.  data_type is set as noted here every time inflate() returns for all
+  flush options, and so can be used to determine the amount of currently
+  consumed input in bits.
+
+    The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+  end of each deflate block header is reached, before any actual data in that
+  block is decoded.  This allows the caller to determine the length of the
+  deflate block header for later use in random access within a deflate block.
+  256 is added to the value of strm->data_type when inflate() returns
+  immediately after reaching the end of the deflate block header.
 
     inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster approach
-  may be used for the single inflate() call.
+  error.  However if all decompression is to be performed in a single step (a
+  single call of inflate), the parameter flush should be set to Z_FINISH.  In
+  this case all pending input is processed and all pending output is flushed;
+  avail_out must be large enough to hold all the uncompressed data.  (The size
+  of the uncompressed data may have been saved by the compressor for this
+  purpose.) The next operation on this stream must be inflateEnd to deallocate
+  the decompression state.  The use of Z_FINISH is never required, but can be
+  used to inform inflate that a faster approach may be used for the single
+  inflate() call.
 
      In this implementation, inflate() always flushes as much output as
   possible to the output buffer, and always uses the faster approach on the
-  first call. So the only effect of the flush parameter in this implementation
+  first call.  So the only effect of the flush parameter in this implementation
   is on the return value of inflate(), as noted below, or when it returns early
-  because Z_BLOCK is used.
+  because Z_BLOCK or Z_TREES is used.
 
      If a preset dictionary is needed after this call (see inflateSetDictionary
   below), inflate sets strm->adler to the adler32 checksum of the dictionary
   chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
   strm->adler to the adler32 checksum of all output produced so far (that is,
   total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
-  below. At the end of the stream, inflate() checks that its computed adler32
+  below.  At the end of the stream, inflate() checks that its computed adler32
   checksum is equal to that saved by the compressor and returns Z_STREAM_END
   only if the checksum is correct.
 
-    inflate() will decompress and check either zlib-wrapped or gzip-wrapped
-  deflate data.  The header type is detected automatically.  Any information
-  contained in the gzip header is not retained, so applications that need that
-  information should instead use raw inflate, see inflateInit2() below, or
-  inflateBack() and perform their own processing of the gzip header and
-  trailer.
+    inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+  deflate data.  The header type is detected automatically, if requested when
+  initializing with inflateInit2().  Any information contained in the gzip
+  header is not retained, so applications that need that information should
+  instead use raw inflate, see inflateInit2() below, or inflateBack() and
+  perform their own processing of the gzip header and trailer.
 
     inflate() returns Z_OK if some progress has been made (more input processed
   or more output produced), Z_STREAM_END if the end of the compressed data has
@@ -449,27 +486,28 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
   corrupted (input stream not conforming to the zlib format or incorrect check
   value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
-  if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
+  next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
   Z_BUF_ERROR if no progress is possible or if there was not enough room in the
-  output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+  output buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
   inflate() can be called again with more input and more output space to
-  continue decompressing. If Z_DATA_ERROR is returned, the application may then
-  call inflateSync() to look for a good compression block if a partial recovery
-  of the data is desired.
+  continue decompressing.  If Z_DATA_ERROR is returned, the application may
+  then call inflateSync() to look for a good compression block if a partial
+  recovery of the data is desired.
 */
 
 
 ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
 /*
      All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
+   This function discards any unprocessed input and does not flush any pending
+   output.
 
      inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
+   was inconsistent.  In the error case, msg may be set but then points to a
    static string (which must not be deallocated).
 */
 
+
                         /* Advanced functions */
 
 /*
@@ -484,55 +522,57 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
                                      int  memLevel,
                                      int  strategy));
 
-     This is another version of deflateInit with more compression options. The
-   fields next_in, zalloc, zfree and opaque must be initialized before by
-   the caller.
+     This is another version of deflateInit with more compression options.  The
+   fields next_in, zalloc, zfree and opaque must be initialized before by the
+   caller.
 
-     The method parameter is the compression method. It must be Z_DEFLATED in
+     The method parameter is the compression method.  It must be Z_DEFLATED in
    this version of the library.
 
      The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer). It should be in the range 8..15 for this
-   version of the library. Larger values of this parameter result in better
-   compression at the expense of memory usage. The default value is 15 if
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library.  Larger values of this parameter result in better
+   compression at the expense of memory usage.  The default value is 15 if
    deflateInit is used instead.
 
-     windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
-   determines the window size. deflate() will then generate raw deflate data
+     windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
+   determines the window size.  deflate() will then generate raw deflate data
    with no zlib header or trailer, and will not compute an adler32 check value.
 
-     windowBits can also be greater than 15 for optional gzip encoding. Add
+     windowBits can also be greater than 15 for optional gzip encoding.  Add
    16 to windowBits to write a simple gzip header and trailer around the
-   compressed data instead of a zlib wrapper. The gzip header will have no
-   file name, no extra data, no comment, no modification time (set to zero),
-   no header crc, and the operating system will be set to 255 (unknown).  If a
+   compressed data instead of a zlib wrapper.  The gzip header will have no
+   file name, no extra data, no comment, no modification time (set to zero), no
+   header crc, and the operating system will be set to 255 (unknown).  If a
    gzip stream is being written, strm->adler is a crc32 instead of an adler32.
 
      The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state. memLevel=1 uses minimum memory but
-   is slow and reduces compression ratio; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8. See zconf.h for total memory
-   usage as a function of windowBits and memLevel.
+   for the internal compression state.  memLevel=1 uses minimum memory but is
+   slow and reduces compression ratio; memLevel=9 uses maximum memory for
+   optimal speed.  The default value is 8.  See zconf.h for total memory usage
+   as a function of windowBits and memLevel.
 
-     The strategy parameter is used to tune the compression algorithm. Use the
+     The strategy parameter is used to tune the compression algorithm.  Use the
    value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
    filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
    string match), or Z_RLE to limit match distances to one (run-length
-   encoding). Filtered data consists mostly of small values with a somewhat
-   random distribution. In this case, the compression algorithm is tuned to
-   compress them better. The effect of Z_FILTERED is to force more Huffman
+   encoding).  Filtered data consists mostly of small values with a somewhat
+   random distribution.  In this case, the compression algorithm is tuned to
+   compress them better.  The effect of Z_FILTERED is to force more Huffman
    coding and less string matching; it is somewhat intermediate between
-   Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as
-   Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy
-   parameter only affects the compression ratio but not the correctness of the
-   compressed output even if it is not set appropriately.  Z_FIXED prevents the
-   use of dynamic Huffman codes, allowing for a simpler decoder for special
-   applications.
-
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
-   method). msg is set to null if there is no error message.  deflateInit2 does
-   not perform any compression: this will be done by deflate().
+   Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY.  Z_RLE is designed to be almost as
+   fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data.  The
+   strategy parameter only affects the compression ratio but not the
+   correctness of the compressed output even if it is not set appropriately.
+   Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+   decoder for special applications.
+
+     deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+   method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+   incompatible with the version assumed by the caller (ZLIB_VERSION).  msg is
+   set to null if there is no error message.  deflateInit2 does not perform any
+   compression: this will be done by deflate().
 */
 
 ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
@@ -540,37 +580,37 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
                                              uInt  dictLength));
 /*
      Initializes the compression dictionary from the given byte sequence
-   without producing any compressed output. This function must be called
-   immediately after deflateInit, deflateInit2 or deflateReset, before any
-   call of deflate. The compressor and decompressor must use exactly the same
+   without producing any compressed output.  This function must be called
+   immediately after deflateInit, deflateInit2 or deflateReset, before any call
+   of deflate.  The compressor and decompressor must use exactly the same
    dictionary (see inflateSetDictionary).
 
      The dictionary should consist of strings (byte sequences) that are likely
    to be encountered later in the data to be compressed, with the most commonly
-   used strings preferably put towards the end of the dictionary. Using a
+   used strings preferably put towards the end of the dictionary.  Using a
    dictionary is most useful when the data to be compressed is short and can be
    predicted with good accuracy; the data can then be compressed better than
    with the default empty dictionary.
 
      Depending on the size of the compression data structures selected by
    deflateInit or deflateInit2, a part of the dictionary may in effect be
-   discarded, for example if the dictionary is larger than the window size in
-   deflate or deflate2. Thus the strings most likely to be useful should be
-   put at the end of the dictionary, not at the front. In addition, the
-   current implementation of deflate will use at most the window size minus
-   262 bytes of the provided dictionary.
+   discarded, for example if the dictionary is larger than the window size
+   provided in deflateInit or deflateInit2.  Thus the strings most likely to be
+   useful should be put at the end of the dictionary, not at the front.  In
+   addition, the current implementation of deflate will use at most the window
+   size minus 262 bytes of the provided dictionary.
 
      Upon return of this function, strm->adler is set to the adler32 value
    of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor. (The adler32 value
+   which dictionary has been used by the compressor.  (The adler32 value
    applies to the whole dictionary even if only a subset of the dictionary is
    actually used by the compressor.) If a raw deflate was requested, then the
    adler32 value is not computed and strm->adler is not set.
 
      deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state is
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
    inconsistent (for example if deflate has already been called for this stream
-   or if the compression method is bsort). deflateSetDictionary does not
+   or if the compression method is bsort).  deflateSetDictionary does not
    perform any compression: this will be done by deflate().
 */
 
@@ -581,26 +621,26 @@ ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
 
      This function can be useful when several compression strategies will be
    tried, for example when there are several ways of pre-processing the input
-   data with a filter. The streams that will be discarded should then be freed
+   data with a filter.  The streams that will be discarded should then be freed
    by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and
-   can consume lots of memory.
+   compression state which can be quite large, so this strategy is slow and can
+   consume lots of memory.
 
      deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being NULL). msg is left unchanged in both source and
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
    destination.
 */
 
 ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
 /*
      This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.
-   The stream will keep the same compression level and any other attributes
-   that may have been set by deflateInit2.
+   but does not free and reallocate all the internal compression state.  The
+   stream will keep the same compression level and any other attributes that
+   may have been set by deflateInit2.
 
-      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
+     deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
 */
 
 ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
@@ -610,18 +650,18 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
      Dynamically update the compression level and compression strategy.  The
    interpretation of level and strategy is as in deflateInit2.  This can be
    used to switch between compression and straight copy of the input data, or
-   to switch to a different kind of input data requiring a different
-   strategy. If the compression level is changed, the input available so far
-   is compressed with the old level (and may be flushed); the new level will
-   take effect only at the next call of deflate().
+   to switch to a different kind of input data requiring a different strategy.
+   If the compression level is changed, the input available so far is
+   compressed with the old level (and may be flushed); the new level will take
+   effect only at the next call of deflate().
 
      Before the call of deflateParams, the stream state must be set as for
-   a call of deflate(), since the currently available input may have to
-   be compressed and flushed. In particular, strm->avail_out must be non-zero.
+   a call of deflate(), since the currently available input may have to be
+   compressed and flushed.  In particular, strm->avail_out must be non-zero.
 
      deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
-   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
-   if strm->avail_out was zero.
+   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
+   strm->avail_out was zero.
 */
 
 ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
@@ -645,9 +685,10 @@ ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
                                        uLong sourceLen));
 /*
      deflateBound() returns an upper bound on the compressed size after
-   deflation of sourceLen bytes.  It must be called after deflateInit()
-   or deflateInit2().  This would be used to allocate an output buffer
-   for deflation in a single pass, and so would be called before deflate().
+   deflation of sourceLen bytes.  It must be called after deflateInit() or
+   deflateInit2(), and after deflateSetHeader(), if used.  This would be used
+   to allocate an output buffer for deflation in a single pass, and so would be
+   called before deflate().
 */
 
 ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
@@ -655,21 +696,21 @@ ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
                                      int value));
 /*
      deflatePrime() inserts bits in the deflate output stream.  The intent
-  is that this function is used to start off the deflate output with the
-  bits leftover from a previous deflate stream when appending to it.  As such,
-  this function can only be used for raw deflate, and must be used before the
-  first deflate() call after a deflateInit2() or deflateReset().  bits must be
-  less than or equal to 16, and that many of the least significant bits of
-  value will be inserted in the output.
-
-      deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   is that this function is used to start off the deflate output with the bits
+   leftover from a previous deflate stream when appending to it.  As such, this
+   function can only be used for raw deflate, and must be used before the first
+   deflate() call after a deflateInit2() or deflateReset().  bits must be less
+   than or equal to 16, and that many of the least significant bits of value
+   will be inserted in the output.
+
+     deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent.
 */
 
 ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
                                          gz_headerp head));
 /*
-      deflateSetHeader() provides gzip header information for when a gzip
+     deflateSetHeader() provides gzip header information for when a gzip
    stream is requested by deflateInit2().  deflateSetHeader() may be called
    after deflateInit2() or deflateReset() and before the first call of
    deflate().  The text, time, os, extra field, name, and comment information
@@ -682,11 +723,11 @@ ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
    1.3.x) do not support header crc's, and will report that it is a "multi-part
    gzip file" and give up.
 
-      If deflateSetHeader is not used, the default gzip header has text false,
+     If deflateSetHeader is not used, the default gzip header has text false,
    the time set to zero, and os set to 255, with no extra, name, or comment
    fields.  The gzip header is returned to the default state by deflateReset().
 
-      deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+     deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent.
 */
 
@@ -694,43 +735,50 @@ ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
 ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
                                      int  windowBits));
 
-     This is another version of inflateInit with an extra parameter. The
+     This is another version of inflateInit with an extra parameter.  The
    fields next_in, avail_in, zalloc, zfree and opaque must be initialized
    before by the caller.
 
      The windowBits parameter is the base two logarithm of the maximum window
    size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library. The default value is 15 if inflateInit is used
-   instead. windowBits must be greater than or equal to the windowBits value
+   this version of the library.  The default value is 15 if inflateInit is used
+   instead.  windowBits must be greater than or equal to the windowBits value
    provided to deflateInit2() while compressing, or it must be equal to 15 if
-   deflateInit2() was not used. If a compressed stream with a larger window
+   deflateInit2() was not used.  If a compressed stream with a larger window
    size is given as input, inflate() will return with the error code
    Z_DATA_ERROR instead of trying to allocate a larger window.
 
-     windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
-   determines the window size. inflate() will then process raw deflate data,
+     windowBits can also be zero to request that inflate use the window size in
+   the zlib header of the compressed stream.
+
+     windowBits can also be -8..-15 for raw inflate.  In this case, -windowBits
+   determines the window size.  inflate() will then process raw deflate data,
    not looking for a zlib or gzip header, not generating a check value, and not
-   looking for any check values for comparison at the end of the stream. This
+   looking for any check values for comparison at the end of the stream.  This
    is for use with other formats that use the deflate compressed data format
-   such as zip.  Those formats provide their own check values. If a custom
+   such as zip.  Those formats provide their own check values.  If a custom
    format is developed using the raw deflate format for compressed data, it is
    recommended that a check value such as an adler32 or a crc32 be applied to
    the uncompressed data as is done in the zlib, gzip, and zip formats.  For
-   most applications, the zlib format should be used as is. Note that comments
+   most applications, the zlib format should be used as is.  Note that comments
    above on the use in deflateInit2() applies to the magnitude of windowBits.
 
-     windowBits can also be greater than 15 for optional gzip decoding. Add
+     windowBits can also be greater than 15 for optional gzip decoding.  Add
    32 to windowBits to enable zlib and gzip decoding with automatic header
    detection, or add 16 to decode only the gzip format (the zlib format will
-   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is
-   a crc32 instead of an adler32.
+   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
+   crc32 instead of an adler32.
 
      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
-   is set to null if there is no error message.  inflateInit2 does not perform
-   any decompression apart from reading the zlib header if present: this will
-   be done by inflate(). (So next_in and avail_in may be modified, but next_out
-   and avail_out are unchanged.)
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit2 does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit2() does not process any header information -- that is
+   deferred until inflate() is called.
 */
 
 ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
@@ -738,8 +786,8 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
                                              uInt  dictLength));
 /*
      Initializes the decompression dictionary from the given uncompressed byte
-   sequence. This function must be called immediately after a call of inflate,
-   if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+   sequence.  This function must be called immediately after a call of inflate,
+   if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
    can be determined from the adler32 value returned by that call of inflate.
    The compressor and decompressor must use exactly the same dictionary (see
    deflateSetDictionary).  For raw inflate, this function can be called
@@ -748,26 +796,26 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
    dictionary that was used for compression is provided.
 
      inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state is
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
    inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect adler32 value). inflateSetDictionary does not
+   expected one (incorrect adler32 value).  inflateSetDictionary does not
    perform any decompression: this will be done by subsequent calls of
    inflate().
 */
 
 ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
 /*
-    Skips invalid compressed data until a full flush point (see above the
-  description of deflate with Z_FULL_FLUSH) can be found, or until all
-  available input is skipped. No output is provided.
-
-    inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no flush point has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
+     Skips invalid compressed data until a full flush point (see above the
+   description of deflate with Z_FULL_FLUSH) can be found, or until all
+   available input is skipped.  No output is provided.
+
+     inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+   if no more input was provided, Z_DATA_ERROR if no flush point has been
+   found, or Z_STREAM_ERROR if the stream structure was inconsistent.  In the
+   success case, the application may save the current current value of total_in
+   which indicates where valid compressed data was found.  In the error case,
+   the application may repeatedly call inflateSync, providing more input each
+   time, until success or end of the input data.
 */
 
 ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
@@ -782,18 +830,30 @@ ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
 
      inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being NULL). msg is left unchanged in both source and
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
    destination.
 */
 
 ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
 /*
      This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
+   but does not free and reallocate all the internal decompression state.  The
+   stream will keep attributes that may have been set by inflateInit2.
 
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
+     inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+                                      int windowBits));
+/*
+     This function is the same as inflateReset, but it also permits changing
+   the wrap and window size requests.  The windowBits parameter is interpreted
+   the same as it is for inflateInit2.
+
+     inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+   the windowBits parameter is invalid.
 */
 
 ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
@@ -801,54 +861,87 @@ ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
                                      int value));
 /*
      This function inserts bits in the inflate input stream.  The intent is
-  that this function is used to start inflating at a bit position in the
-  middle of a byte.  The provided bits will be used before any bytes are used
-  from next_in.  This function should only be used with raw inflate, and
-  should be used before the first inflate() call after inflateInit2() or
-  inflateReset().  bits must be less than or equal to 16, and that many of the
-  least significant bits of value will be inserted in the input.
-
-      inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   that this function is used to start inflating at a bit position in the
+   middle of a byte.  The provided bits will be used before any bytes are used
+   from next_in.  This function should only be used with raw inflate, and
+   should be used before the first inflate() call after inflateInit2() or
+   inflateReset().  bits must be less than or equal to 16, and that many of the
+   least significant bits of value will be inserted in the input.
+
+     If bits is negative, then the input stream bit buffer is emptied.  Then
+   inflatePrime() can be called again to put bits in the buffer.  This is used
+   to clear out bits leftover after feeding inflate a block description prior
+   to feeding inflate codes.
+
+     inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent.
 */
 
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+     This function returns two values, one in the lower 16 bits of the return
+   value, and the other in the remaining upper bits, obtained by shifting the
+   return value down 16 bits.  If the upper value is -1 and the lower value is
+   zero, then inflate() is currently decoding information outside of a block.
+   If the upper value is -1 and the lower value is non-zero, then inflate is in
+   the middle of a stored block, with the lower value equaling the number of
+   bytes from the input remaining to copy.  If the upper value is not -1, then
+   it is the number of bits back from the current bit position in the input of
+   the code (literal or length/distance pair) currently being processed.  In
+   that case the lower value is the number of bytes already emitted for that
+   code.
+
+     A code is being processed if inflate is waiting for more input to complete
+   decoding of the code, or if it has completed decoding but is waiting for
+   more output space to write the literal or match data.
+
+     inflateMark() is used to mark locations in the input data for random
+   access, which may be at bit positions, and to note those cases where the
+   output of a code may span boundaries of random access blocks.  The current
+   location in the input stream can be determined from avail_in and data_type
+   as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+     inflateMark returns the value noted above or -1 << 16 if the provided
+   source stream state was inconsistent.
+*/
+
 ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
                                          gz_headerp head));
 /*
-      inflateGetHeader() requests that gzip header information be stored in the
+     inflateGetHeader() requests that gzip header information be stored in the
    provided gz_header structure.  inflateGetHeader() may be called after
    inflateInit2() or inflateReset(), and before the first call of inflate().
    As inflate() processes the gzip stream, head->done is zero until the header
    is completed, at which time head->done is set to one.  If a zlib stream is
    being decoded, then head->done is set to -1 to indicate that there will be
-   no gzip header information forthcoming.  Note that Z_BLOCK can be used to
-   force inflate() to return immediately after header processing is complete
-   and before any actual data is decompressed.
+   no gzip header information forthcoming.  Note that Z_BLOCK or Z_TREES can be
+   used to force inflate() to return immediately after header processing is
+   complete and before any actual data is decompressed.
 
-      The text, time, xflags, and os fields are filled in with the gzip header
+     The text, time, xflags, and os fields are filled in with the gzip header
    contents.  hcrc is set to true if there is a header CRC.  (The header CRC
-   was valid if done is set to one.)  If extra is not Z_NULL, then extra_max
+   was valid if done is set to one.) If extra is not Z_NULL, then extra_max
    contains the maximum number of bytes to write to extra.  Once done is true,
    extra_len contains the actual extra field length, and extra contains the
    extra field, or that field truncated if extra_max is less than extra_len.
    If name is not Z_NULL, then up to name_max characters are written there,
    terminated with a zero unless the length is greater than name_max.  If
    comment is not Z_NULL, then up to comm_max characters are written there,
-   terminated with a zero unless the length is greater than comm_max.  When
-   any of extra, name, or comment are not Z_NULL and the respective field is
-   not present in the header, then that field is set to Z_NULL to signal its
+   terminated with a zero unless the length is greater than comm_max.  When any
+   of extra, name, or comment are not Z_NULL and the respective field is not
+   present in the header, then that field is set to Z_NULL to signal its
    absence.  This allows the use of deflateSetHeader() with the returned
    structure to duplicate the header.  However if those fields are set to
    allocated memory, then the application will need to save those pointers
    elsewhere so that they can be eventually freed.
 
-      If inflateGetHeader is not used, then the header information is simply
+     If inflateGetHeader is not used, then the header information is simply
    discarded.  The header is always checked for validity, including the header
    CRC if present.  inflateReset() will reset the process to discard the header
    information.  The application would need to call inflateGetHeader() again to
    retrieve the header from the next gzip stream.
 
-      inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+     inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent.
 */
 
@@ -869,9 +962,9 @@ ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
      See inflateBack() for the usage of these routines.
 
      inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
-   the paramaters are invalid, Z_MEM_ERROR if the internal state could not
-   be allocated, or Z_VERSION_ERROR if the version of the library does not
-   match the version of the header file.
+   the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
+   allocated, or Z_VERSION_ERROR if the version of the library does not match
+   the version of the header file.
 */
 
 typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
@@ -891,15 +984,15 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
      inflateBackInit() must be called first to allocate the internal state
    and to initialize the state with the user-provided window buffer.
    inflateBack() may then be used multiple times to inflate a complete, raw
-   deflate stream with each call.  inflateBackEnd() is then called to free
-   the allocated state.
+   deflate stream with each call.  inflateBackEnd() is then called to free the
+   allocated state.
 
      A raw deflate stream is one with no zlib or gzip header or trailer.
    This routine would normally be used in a utility that reads zip or gzip
    files and writes out uncompressed files.  The utility would decode the
-   header and process the trailer on its own, hence this routine expects
-   only the raw deflate stream to decompress.  This is different from the
-   normal behavior of inflate(), which expects either a zlib or gzip header and
+   header and process the trailer on its own, hence this routine expects only
+   the raw deflate stream to decompress.  This is different from the normal
+   behavior of inflate(), which expects either a zlib or gzip header and
    trailer around the deflate stream.
 
      inflateBack() uses two subroutines supplied by the caller that are then
@@ -925,7 +1018,7 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
    calling inflateBack().  If strm->next_in is Z_NULL, then in() will be called
    immediately for input.  If strm->next_in is not Z_NULL, then strm->avail_in
    must also be initialized, and then if strm->avail_in is not zero, input will
-   initially be taken from strm->next_in[0 .. strm->avail_in - 1].
+   initially be taken from strm->next_in[0 ..  strm->avail_in - 1].
 
      The in_desc and out_desc parameters of inflateBack() is passed as the
    first parameter of in() and out() respectively when they are called.  These
@@ -935,15 +1028,15 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
      On return, inflateBack() will set strm->next_in and strm->avail_in to
    pass back any unused input that was provided by the last in() call.  The
    return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
-   if in() or out() returned an error, Z_DATA_ERROR if there was a format
-   error in the deflate stream (in which case strm->msg is set to indicate the
-   nature of the error), or Z_STREAM_ERROR if the stream was not properly
-   initialized.  In the case of Z_BUF_ERROR, an input or output error can be
-   distinguished using strm->next_in which will be Z_NULL only if in() returned
-   an error.  If strm->next is not Z_NULL, then the Z_BUF_ERROR was due to
-   out() returning non-zero.  (in() will always be called before out(), so
-   strm->next_in is assured to be defined if out() returns non-zero.)  Note
-   that inflateBack() cannot return Z_OK.
+   if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+   in the deflate stream (in which case strm->msg is set to indicate the nature
+   of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+   In the case of Z_BUF_ERROR, an input or output error can be distinguished
+   using strm->next_in which will be Z_NULL only if in() returned an error.  If
+   strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+   non-zero.  (in() will always be called before out(), so strm->next_in is
+   assured to be defined if out() returns non-zero.) Note that inflateBack()
+   cannot return Z_OK.
 */
 
 ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
@@ -999,23 +1092,22 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
                         /* utility functions */
 
 /*
-     The following utility functions are implemented on top of the
-   basic stream-oriented functions. To simplify the interface, some
-   default options are assumed (compression level and memory usage,
-   standard memory allocation functions). The source code of these
-   utility functions can easily be modified if you need special options.
+     The following utility functions are implemented on top of the basic
+   stream-oriented functions.  To simplify the interface, some default options
+   are assumed (compression level and memory usage, standard memory allocation
+   functions).  The source code of these utility functions can be modified if
+   you need special options.
 */
 
 ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
                                  const Bytef *source, uLong sourceLen));
 /*
      Compresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be at least the value returned
-   by compressBound(sourceLen). Upon exit, destLen is the actual size of the
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
    compressed buffer.
-     This function can be used to compress a whole file at once if the
-   input file is mmap'ed.
+
      compress returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_BUF_ERROR if there was not enough room in the output
    buffer.
@@ -1025,11 +1117,11 @@ ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
                                   const Bytef *source, uLong sourceLen,
                                   int level));
 /*
-     Compresses the source buffer into the destination buffer. The level
+     Compresses the source buffer into the destination buffer.  The level
    parameter has the same meaning as in deflateInit.  sourceLen is the byte
-   length of the source buffer. Upon entry, destLen is the total size of the
+   length of the source buffer.  Upon entry, destLen is the total size of the
    destination buffer, which must be at least the value returned by
-   compressBound(sourceLen). Upon exit, destLen is the actual size of the
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
    compressed buffer.
 
      compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
@@ -1040,22 +1132,20 @@ ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
 ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
 /*
      compressBound() returns an upper bound on the compressed size after
-   compress() or compress2() on sourceLen bytes.  It would be used before
-   a compress() or compress2() call to allocate the destination buffer.
+   compress() or compress2() on sourceLen bytes.  It would be used before a
+   compress() or compress2() call to allocate the destination buffer.
 */
 
 ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
                                    const Bytef *source, uLong sourceLen));
 /*
      Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be large enough to hold the
-   entire uncompressed data. (The size of the uncompressed data must have
-   been saved previously by the compressor and transmitted to the decompressor
-   by some mechanism outside the scope of this compression library.)
-   Upon exit, destLen is the actual size of the compressed buffer.
-     This function can be used to decompress a whole file at once if the
-   input file is mmap'ed.
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be large enough to hold the entire
+   uncompressed data.  (The size of the uncompressed data must have been saved
+   previously by the compressor and transmitted to the decompressor by some
+   mechanism outside the scope of this compression library.) Upon exit, destLen
+   is the actual size of the uncompressed buffer.
 
      uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_BUF_ERROR if there was not enough room in the output
@@ -1063,136 +1153,199 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
 */
 
 
-typedef voidp gzFile;
+                        /* gzip file access functions */
+
+/*
+     This library supports reading and writing files in gzip (.gz) format with
+   an interface similar to that of stdio, using the functions that start with
+   "gz".  The gzip format is different from the zlib format.  gzip is a gzip
+   wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef voidp gzFile;       /* opaque gzip file descriptor */
 
-ZEXTERN gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
 /*
-     Opens a gzip (.gz) file for reading or writing. The mode parameter
-   is as in fopen ("rb" or "wb") but can also include a compression level
-   ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
-   Huffman only compression as in "wb1h", or 'R' for run-length encoding
-   as in "wb1R". (See the description of deflateInit2 for more information
-   about the strategy parameter.)
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+     Opens a gzip (.gz) file for reading or writing.  The mode parameter is as
+   in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+   a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+   compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+   for fixed code compression as in "wb9F".  (See the description of
+   deflateInit2 for more information about the strategy parameter.) Also "a"
+   can be used instead of "w" to request that the gzip stream that will be
+   written be appended to the file.  "+" will result in an error, since reading
+   and writing to the same gzip file is not supported.
 
      gzopen can be used to read a file which is not in gzip format; in this
    case gzread will directly read from the file without decompression.
 
-     gzopen returns NULL if the file could not be opened or if there was
-   insufficient memory to allocate the (de)compression state; errno
-   can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is Z_MEM_ERROR).  */
+     gzopen returns NULL if the file could not be opened, if there was
+   insufficient memory to allocate the gzFile state, or if an invalid mode was
+   specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+   errno can be checked to determine if the reason gzopen failed was that the
+   file could not be opened.
+*/
 
-ZEXTERN gzFile ZEXPORT gzdopen  OF((int fd, const char *mode));
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
 /*
-     gzdopen() associates a gzFile with the file descriptor fd.  File
-   descriptors are obtained from calls like open, dup, creat, pipe or
-   fileno (in the file has been previously opened with fopen).
-   The mode parameter is as in gzopen.
-     The next call of gzclose on the returned gzFile will also close the
-   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
-   descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
-     gzdopen returns NULL if there was insufficient memory to allocate
-   the (de)compression state.
+     gzdopen associates a gzFile with the file descriptor fd.  File descriptors
+   are obtained from calls like open, dup, creat, pipe or fileno (if the file
+   has been previously opened with fopen).  The mode parameter is as in gzopen.
+
+     The next call of gzclose on the returned gzFile will also close the file
+   descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+   fd.  If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+   mode);.  The duplicated descriptor should be saved to avoid a leak, since
+   gzdopen does not close fd if it fails.
+
+     gzdopen returns NULL if there was insufficient memory to allocate the
+   gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+   provided, or '+' was provided), or if fd is -1.  The file descriptor is not
+   used until the next gz* read, write, seek, or close operation, so gzdopen
+   will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+     Set the internal buffer size used by this library's functions.  The
+   default buffer size is 8192 bytes.  This function must be called after
+   gzopen() or gzdopen(), and before any other calls that read or write the
+   file.  The buffer memory allocation is always deferred to the first read or
+   write.  Two buffers are allocated, either both of the specified size when
+   writing, or one of the specified size and the other twice that size when
+   reading.  A larger buffer size of, for example, 64K or 128K bytes will
+   noticeably increase the speed of decompression (reading).
+
+     The new buffer size also affects the maximum length for gzprintf().
+
+     gzbuffer() returns 0 on success, or -1 on failure, such as being called
+   too late.
 */
 
 ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
 /*
-     Dynamically update the compression level or strategy. See the description
+     Dynamically update the compression level or strategy.  See the description
    of deflateInit2 for the meaning of these parameters.
+
      gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
    opened for writing.
 */
 
-ZEXTERN int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
 /*
-     Reads the given number of uncompressed bytes from the compressed file.
-   If the input file was not in gzip format, gzread copies the given number
-   of bytes into the buffer.
-     gzread returns the number of uncompressed bytes actually read (0 for
-   end of file, -1 for error). */
+     Reads the given number of uncompressed bytes from the compressed file.  If
+   the input file was not in gzip format, gzread copies the given number of
+   bytes into the buffer.
+
+     After reaching the end of a gzip stream in the input, gzread will continue
+   to read, looking for another gzip stream, or failing that, reading the rest
+   of the input file directly without decompression.  The entire input file
+   will be read if gzread is called until it returns less than the requested
+   len.
+
+     gzread returns the number of uncompressed bytes actually read, less than
+   len for end of file, or -1 for error.
+*/
 
-ZEXTERN int ZEXPORT    gzwrite OF((gzFile file,
-                                   voidpc buf, unsigned len));
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+                                voidpc buf, unsigned len));
 /*
      Writes the given number of uncompressed bytes into the compressed file.
-   gzwrite returns the number of uncompressed bytes actually written
-   (0 in case of error).
+   gzwrite returns the number of uncompressed bytes written or 0 in case of
+   error.
 */
 
-ZEXTERN int ZEXPORTVA   gzprintf OF((gzFile file, const char *format, ...));
+ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
 /*
-     Converts, formats, and writes the args to the compressed file under
-   control of the format string, as in fprintf. gzprintf returns the number of
-   uncompressed bytes actually written (0 in case of error).  The number of
-   uncompressed bytes written is limited to 4095. The caller should assure that
-   this limit is not exceeded. If it is exceeded, then gzprintf() will return
-   return an error (0) with nothing written. In this case, there may also be a
-   buffer overflow with unpredictable consequences, which is possible only if
-   zlib was compiled with the insecure functions sprintf() or vsprintf()
-   because the secure snprintf() or vsnprintf() functions were not available.
+     Converts, formats, and writes the arguments to the compressed file under
+   control of the format string, as in fprintf.  gzprintf returns the number of
+   uncompressed bytes actually written, or 0 in case of error.  The number of
+   uncompressed bytes written is limited to 8191, or one less than the buffer
+   size given to gzbuffer().  The caller should assure that this limit is not
+   exceeded.  If it is exceeded, then gzprintf() will return an error (0) with
+   nothing written.  In this case, there may also be a buffer overflow with
+   unpredictable consequences, which is possible only if zlib was compiled with
+   the insecure functions sprintf() or vsprintf() because the secure snprintf()
+   or vsnprintf() functions were not available.  This can be determined using
+   zlibCompileFlags().
 */
 
 ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
 /*
-      Writes the given null-terminated string to the compressed file, excluding
+     Writes the given null-terminated string to the compressed file, excluding
    the terminating null character.
-      gzputs returns the number of characters written, or -1 in case of error.
+
+     gzputs returns the number of characters written, or -1 in case of error.
 */
 
 ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
 /*
-      Reads bytes from the compressed file until len-1 characters are read, or
-   a newline character is read and transferred to buf, or an end-of-file
-   condition is encountered.  The string is then terminated with a null
-   character.
-      gzgets returns buf, or Z_NULL in case of error.
+     Reads bytes from the compressed file until len-1 characters are read, or a
+   newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  If any characters are read or if len == 1, the
+   string is terminated with a null character.  If no characters are read due
+   to an end-of-file or len < 1, then the buffer is left untouched.
+
+     gzgets returns buf which is a null-terminated string, or it returns NULL
+   for end-of-file or in case of error.  If there was an error, the contents at
+   buf are indeterminate.
 */
 
-ZEXTERN int ZEXPORT    gzputc OF((gzFile file, int c));
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
 /*
-      Writes c, converted to an unsigned char, into the compressed file.
-   gzputc returns the value that was written, or -1 in case of error.
+     Writes c, converted to an unsigned char, into the compressed file.  gzputc
+   returns the value that was written, or -1 in case of error.
 */
 
-ZEXTERN int ZEXPORT    gzgetc OF((gzFile file));
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
 /*
-      Reads one byte from the compressed file. gzgetc returns this byte
-   or -1 in case of end of file or error.
+     Reads one byte from the compressed file.  gzgetc returns this byte or -1
+   in case of end of file or error.
 */
 
-ZEXTERN int ZEXPORT    gzungetc OF((int c, gzFile file));
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
 /*
-      Push one character back onto the stream to be read again later.
-   Only one character of push-back is allowed.  gzungetc() returns the
-   character pushed, or -1 on failure.  gzungetc() will fail if a
-   character has been pushed but not read yet, or if c is -1. The pushed
-   character will be discarded if the stream is repositioned with gzseek()
-   or gzrewind().
+     Push one character back onto the stream to be read as the first character
+   on the next read.  At least one character of push-back is allowed.
+   gzungetc() returns the character pushed, or -1 on failure.  gzungetc() will
+   fail if c is -1, and may fail if a character has been pushed but not read
+   yet.  If gzungetc is used immediately after gzopen or gzdopen, at least the
+   output buffer size of pushed characters is allowed.  (See gzbuffer above.)
+   The pushed character will be discarded if the stream is repositioned with
+   gzseek() or gzrewind().
 */
 
-ZEXTERN int ZEXPORT    gzflush OF((gzFile file, int flush));
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
 /*
-     Flushes all pending output into the compressed file. The parameter
-   flush is as in the deflate() function. The return value is the zlib
-   error number (see function gzerror below). gzflush returns Z_OK if
-   the flush parameter is Z_FINISH and all output could be flushed.
-     gzflush should be called only when strictly necessary because it can
-   degrade compression.
+     Flushes all pending output into the compressed file.  The parameter flush
+   is as in the deflate() function.  The return value is the zlib error number
+   (see function gzerror below).  gzflush is only permitted when writing.
+
+     If the flush parameter is Z_FINISH, the remaining data is written and the
+   gzip stream is completed in the output.  If gzwrite() is called again, a new
+   gzip stream will be started in the output.  gzread() is able to read such
+   concatented gzip streams.
+
+     gzflush should be called only when strictly necessary because it will
+   degrade compression if called too often.
 */
 
-ZEXTERN z_off_t ZEXPORT    gzseek OF((gzFile file,
-                                      z_off_t offset, int whence));
 /*
-      Sets the starting position for the next gzread or gzwrite on the
-   given compressed file. The offset represents a number of bytes in the
-   uncompressed data stream. The whence parameter is defined as in lseek(2);
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+                                   z_off_t offset, int whence));
+
+     Sets the starting position for the next gzread or gzwrite on the given
+   compressed file.  The offset represents a number of bytes in the
+   uncompressed data stream.  The whence parameter is defined as in lseek(2);
    the value SEEK_END is not supported.
+
      If the file is opened for reading, this function is emulated but can be
-   extremely slow. If the file is opened for writing, only forward seeks are
+   extremely slow.  If the file is opened for writing, only forward seeks are
    supported; gzseek then compresses a sequence of zeroes up to the new
    starting position.
 
-      gzseek returns the resulting offset location as measured in bytes from
+     gzseek returns the resulting offset location as measured in bytes from
    the beginning of the uncompressed stream, or -1 in case of error, in
    particular if the file is opened for writing and the new starting position
    would be before the current position.
@@ -1202,68 +1355,127 @@ ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
 /*
      Rewinds the given file. This function is supported only for reading.
 
-   gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+     gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
 */
 
+/*
 ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
+
+     Returns the starting position for the next gzread or gzwrite on the given
+   compressed file.  This position represents a number of bytes in the
+   uncompressed data stream, and is zero when starting, even if appending or
+   reading a gzip stream from the middle of a file using gzdopen().
+
+     gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
 /*
-     Returns the starting position for the next gzread or gzwrite on the
-   given compressed file. This position represents a number of bytes in the
-   uncompressed data stream.
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
 
-   gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+     Returns the current offset in the file being read or written.  This offset
+   includes the count of bytes that precede the gzip stream, for example when
+   appending or when using gzdopen() for reading.  When reading, the offset
+   does not include as yet unused buffered input.  This information can be used
+   for a progress indicator.  On error, gzoffset() returns -1.
 */
 
 ZEXTERN int ZEXPORT gzeof OF((gzFile file));
 /*
-     Returns 1 when EOF has previously been detected reading the given
-   input stream, otherwise zero.
+     Returns true (1) if the end-of-file indicator has been set while reading,
+   false (0) otherwise.  Note that the end-of-file indicator is set only if the
+   read tried to go past the end of the input, but came up short.  Therefore,
+   just like feof(), gzeof() may return false even if there is no more data to
+   read, in the event that the last read request was for the exact number of
+   bytes remaining in the input file.  This will happen if the input file size
+   is an exact multiple of the buffer size.
+
+     If gzeof() returns true, then the read functions will return no more data,
+   unless the end-of-file indicator is reset by gzclearerr() and the input file
+   has grown since the previous end of file was detected.
 */
 
 ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
 /*
-     Returns 1 if file is being read directly without decompression, otherwise
-   zero.
+     Returns true (1) if file is being copied directly while reading, or false
+   (0) if file is a gzip stream being decompressed.  This state can change from
+   false to true while reading the input file if the end of a gzip stream is
+   reached, but is followed by data that is not another gzip stream.
+
+     If the input file is empty, gzdirect() will return true, since the input
+   does not contain a gzip stream.
+
+     If gzdirect() is used immediately after gzopen() or gzdopen() it will
+   cause buffers to be allocated to allow reading the file to determine if it
+   is a gzip file.  Therefore if gzbuffer() is used, it should be called before
+   gzdirect().
 */
 
 ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
 /*
-     Flushes all pending output if necessary, closes the compressed file
-   and deallocates all the (de)compression state. The return value is the zlib
-   error number (see function gzerror below).
+     Flushes all pending output if necessary, closes the compressed file and
+   deallocates the (de)compression state.  Note that once file is closed, you
+   cannot call gzerror with file, since its structures have been deallocated.
+   gzclose must not be called more than once on the same file, just as free
+   must not be called more than once on the same allocation.
+
+     gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+   file operation error, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+     Same as gzclose(), but gzclose_r() is only for use when reading, and
+   gzclose_w() is only for use when writing or appending.  The advantage to
+   using these instead of gzclose() is that they avoid linking in zlib
+   compression or decompression code that is not used when only reading or only
+   writing respectively.  If gzclose() is used, then both compression and
+   decompression code will be included the application when linking to a static
+   zlib library.
 */
 
 ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
 /*
-     Returns the error message for the last error which occurred on the
-   given compressed file. errnum is set to zlib error number. If an
-   error occurred in the file system and not in the compression library,
-   errnum is set to Z_ERRNO and the application may consult errno
-   to get the exact error code.
+     Returns the error message for the last error which occurred on the given
+   compressed file.  errnum is set to zlib error number.  If an error occurred
+   in the file system and not in the compression library, errnum is set to
+   Z_ERRNO and the application may consult errno to get the exact error code.
+
+     The application must not modify the returned string.  Future calls to
+   this function may invalidate the previously returned string.  If file is
+   closed, then the string previously returned by gzerror will no longer be
+   available.
+
+     gzerror() should be used to distinguish errors from end-of-file for those
+   functions above that do not distinguish those cases in their return values.
 */
 
 ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
 /*
-     Clears the error and end-of-file flags for file. This is analogous to the
-   clearerr() function in stdio. This is useful for continuing to read a gzip
+     Clears the error and end-of-file flags for file.  This is analogous to the
+   clearerr() function in stdio.  This is useful for continuing to read a gzip
    file that is being written concurrently.
 */
 
+
                         /* checksum functions */
 
 /*
      These functions are not related to compression but are exported
-   anyway because they might be useful in applications using the
-   compression library.
+   anyway because they might be useful in applications using the compression
+   library.
 */
 
 ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
 /*
      Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
+   return the updated checksum.  If buf is Z_NULL, this function returns the
+   required initial value for the checksum.
+
+     An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster.
+
+   Usage example:
 
      uLong adler = adler32(0L, Z_NULL, 0);
 
@@ -1273,9 +1485,10 @@ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
      if (adler != original_adler) error();
 */
 
+/*
 ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
                                           z_off_t len2));
-/*
+
      Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
    and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
    each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
@@ -1285,9 +1498,11 @@ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
 ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
 /*
      Update a running CRC-32 with the bytes buf[0..len-1] and return the
-   updated CRC-32. If buf is NULL, this function returns the required initial
-   value for the for the crc. Pre- and post-conditioning (one's complement) is
-   performed within this function so it shouldn't be done by the application.
+   updated CRC-32.  If buf is Z_NULL, this function returns the required
+   initial value for the for the crc.  Pre- and post-conditioning (one's
+   complement) is performed within this function so it shouldn't be done by the
+   application.
+
    Usage example:
 
      uLong crc = crc32(0L, Z_NULL, 0);
@@ -1298,9 +1513,9 @@ ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
      if (crc != original_crc) error();
 */
 
+/*
 ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
 
-/*
      Combine two CRC-32 check values into one.  For two sequences of bytes,
    seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
    calculated for each, crc1 and crc2.  crc32_combine() returns the CRC-32
@@ -1339,16 +1554,57 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
         inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
 #define inflateBackInit(strm, windowBits, window) \
         inflateBackInit_((strm), (windowBits), (window), \
-        ZLIB_VERSION, sizeof(z_stream))
+                                            ZLIB_VERSION, sizeof(z_stream))
 
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
+#  define gzopen gzopen64
+#  define gzseek gzseek64
+#  define gztell gztell64
+#  define gzoffset gzoffset64
+#  define adler32_combine adler32_combine64
+#  define crc32_combine crc32_combine64
+#  ifdef _LARGEFILE64_SOURCE
+     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#  endif
+#else
+   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+   ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+   ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
 
+/* hack for buggy compilers */
 #if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
+    struct internal_state {int dummy;};
 #endif
 
+/* undocumented functions */
 ZEXTERN const char   * ZEXPORT zError           OF((int));
-ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp z));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
 ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
+ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
 
 #ifdef __cplusplus
 }
diff --git a/3rdparty/zlib/lib/zdll.lib b/3rdparty/zlib/lib/zdll.lib
index 01f4e10e6..d6ba151a0 100644
--- a/3rdparty/zlib/lib/zdll.lib
+++ b/3rdparty/zlib/lib/zdll.lib
diff --git a/3rdparty/zlib/zlib-1.2.3 b/3rdparty/zlib/zlib-1.2.5
index e69de29bb..e69de29bb 100644
--- a/3rdparty/zlib/zlib-1.2.3
+++ b/3rdparty/zlib/zlib-1.2.5
diff --git a/CMakeLists.txt b/CMakeLists.txt
index 0aee569a3..51fc2e39e 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -196,31 +196,6 @@ endif()
 
 
 #
-# Test typecast to union
-#
-message( STATUS "Check for typecast to union" )
-set( SOURCECODE
-	"typedef union Foonion{\n"
-	"  int i;\n"
-	"  unsigned int ui;\n"
-	"  const char* s;\n"
-	"} Foonion;\n"
-	"int get_i(Foonion onion){ return onion.i; }\n"
-	"int main(int argc, char** argv){\n"
-	"  int i = 0;\n"
-	"  return get_i(((Foonion)(int)i));\n"
-	"}\n"
-	)
-CHECK_C_SOURCE_COMPILES( "${SOURCECODE}" HAVE_TYPECAST_TO_UNION )
-if( HAVE_TYPECAST_TO_UNION )
-	message( STATUS "Check for typecast to union - yes" )
-else()
-	message( STATUS "Check for typecast to union - no" )
-	set_property( CACHE GLOBAL_DEFINITIONS  PROPERTY VALUE "${GLOBAL_DEFINITIONS} -DDB_MANUAL_CAST_TO_UNION" )
-endif()
-
-
-#
 # Test monotonic clock
 #
 # CLOCK_MONOTONIC clock for clock_gettime
diff --git a/Changelog-Trunk.txt b/Changelog-Trunk.txt
index 8082888f6..82b4831c0 100644
--- a/Changelog-Trunk.txt
+++ b/Changelog-Trunk.txt
@@ -1,11 +1,33 @@
 Date	Added
 
+2011-12-10
+	* Updated pcre3.dll and related files from 7.0 to 8.20 (bugreport:4948). [Ai4rei]
+2011-12-09
+	* Updated PACKETVER and packet_db_ver to the most recent fully supported and stable client (2010-07-28aRagexeRE). [Ai4rei]
+2011-12-08
+	* Updated zlib1.dll and related files from 1.2.3 to 1.2.5 (bugreport:4948). [Ai4rei]
+2011-12-04
+	* Random procrastinating in map.c/map.h [Ai4rei]
+	- Rewrote command line option parser. Now reports invalid options and missing option values.
+	- Dropped some alternative option names.
+	- Renamed option --grf-path-file to --grf-path.
+	- Enabled option --inter-config for TXT builds as well (mapreg_txt, party_share_level, etc.).
+	- Fixed outdated website url in version screen.
+	- Replaced 'puts' with 'ShowInfo' in help screen and reformatted it a bit.
+	- Added explanation for option --run-once to help screen (follow up to r789).
+	- Fixed option --inter-config was called --sql-config in help screen (follow up to r930).
+	- Removed orphaned extern variable 'map_server_dns' declaration from map.h (since r7275, follow up to r7360).
+2011-12-03
+	* Preparation clean up in clif.h [Ai4rei]
+	- Synced function declarations and argument names with clif.c including whitespace.
+	- Removed orphaned function declarations.
+	- Removed include to storage.h and put it into .c files that need it instead.
+2011-11-28
+	* Fixed novending cell check using misleading error message (bugreport:2592, since r11572 and r14724, related r11580). [Ai4rei]
+	* Fixed removing item scripts through script command *setitemscript not working the way it is stated in script_commands.txt (related r9831). [Ai4rei]
 2011-11-27
 	* Welcome to RAthena!  http://rathena.org/board/topic/53704-rathena-the-fork/
 
-2011/11/28
-	* Fixed novending cell check using misleading error message (bugreport:2592, since r11572 and r14724, related r11580). [Ai4rei]
-	* Fixed removing item scripts through script command *setitemscript not working the way it is stated in script_commands.txt (related r9831). [Ai4rei]
 2011/11/19
 	* Fixed wrong damage numbers being displayed when the damage source was disguised (bugreport:5093, since r14979). [Ai4rei]
 2011/11/17
diff --git a/configure b/configure
index e26d187e8..606107040 100755
--- a/configure
+++ b/configure
@@ -3523,74 +3523,6 @@ fi
 rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 
 
-#
-# DB_MANUAL_CAST_TO_UNION
-#
-echo "$as_me:$LINENO: checking whether $CC is able to typecast to union" >&5
-echo $ECHO_N "checking whether $CC is able to typecast to union... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-
-		typedef union Foonion
-		{
-			int i;
-			unsigned int ui;
-			const char* s;
-		}
-		Foonion;
-
-		int bar(Foonion onion)
-		{
-			return onion.i;
-		}
-
-		int foo(void)
-		{
-			int i = 0;
-
-			return bar(((Foonion)(int)i));
-		}
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-
-		echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-		echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-		CFLAGS="$CFLAGS -DDB_MANUAL_CAST_TO_UNION"
-
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-
 ###############################################################################
 # Check for libraries and header files.
 #
diff --git a/configure.in b/configure.in
index a9e4c289a..3aff089db 100644
--- a/configure.in
+++ b/configure.in
@@ -440,42 +440,6 @@ AC_COMPILE_IFELSE(
 )
 
 
-#
-# DB_MANUAL_CAST_TO_UNION
-#
-AC_MSG_CHECKING([whether $CC is able to typecast to union])
-AC_COMPILE_IFELSE(
-	[
-		typedef union Foonion
-		{
-			int i;
-			unsigned int ui;
-			const char* s;
-		}
-		Foonion;
-		
-		int bar(Foonion onion)
-		{
-			return onion.i;
-		}
-		
-		int foo(void)
-		{
-			int i = 0;
-		
-			return bar(((Foonion)(int)i));
-		}
-	],
-	[
-		AC_MSG_RESULT([yes])
-	],
-	[
-		AC_MSG_RESULT([no])
-		CFLAGS="$CFLAGS -DDB_MANUAL_CAST_TO_UNION"
-	]
-)
-
-
 ###############################################################################
 # Check for libraries and header files.
 #
diff --git a/db/packet_db.txt b/db/packet_db.txt
index a9517e0c0..fc54a6f25 100644
--- a/db/packet_db.txt
+++ b/db/packet_db.txt
@@ -33,7 +33,7 @@
 // Main packet version of the DB to use (default = max available version)
 // Client detection is faster when all clients use this version.
 // Version 23 is the latest Sakexe (above versions are for Renewal clients)
-//packet_db_ver: 23
+//packet_db_ver: 25
 packet_db_ver: default
 
 
diff --git a/pcre3.dll b/pcre3.dll
index b5fd2a637..a1adc37f2 100644
--- a/pcre3.dll
+++ b/pcre3.dll
diff --git a/src/char/int_status.c b/src/char/int_status.c
index 52b14ebbe..769d35f65 100644
--- a/src/char/int_status.c
+++ b/src/char/int_status.c
@@ -29,7 +29,7 @@ static void* create_scdata(DBKey key, va_list args)
  *------------------------------------------*/
 struct scdata* status_search_scdata(int aid, int cid)
 {
-	return (struct scdata*)scdata_db->ensure(scdata_db, i2key(cid), create_scdata, aid);
+	return (struct scdata*)scdata_db->ensure(scdata_db, db_i2key(cid), create_scdata, aid);
 }
 
 /*==========================================
diff --git a/src/common/db.c b/src/common/db.c
index c9b124455..74c3b1f91 100644
--- a/src/common/db.c
+++ b/src/common/db.c
@@ -2437,14 +2437,11 @@ DBMap* db_alloc(const char *file, int line, DBType type, DBOptions options, unsi
 	return &db->vtable;
 }
 
-#ifdef DB_MANUAL_CAST_TO_UNION
 /**
  * Manual cast from 'int' to the union DBKey.
- * Created for compilers that don't support casting to unions.
  * @param key Key to be casted
  * @return The key as a DBKey union
  * @public
- * @see #DB_MANUAL_CAST_TO_UNION
  */
 DBKey db_i2key(int key)
 {
@@ -2457,11 +2454,9 @@ DBKey db_i2key(int key)
 
 /**
  * Manual cast from 'unsigned int' to the union DBKey.
- * Created for compilers that don't support casting to unions.
  * @param key Key to be casted
  * @return The key as a DBKey union
  * @public
- * @see #DB_MANUAL_CAST_TO_UNION
  */
 DBKey db_ui2key(unsigned int key)
 {
@@ -2474,11 +2469,9 @@ DBKey db_ui2key(unsigned int key)
 
 /**
  * Manual cast from 'const char *' to the union DBKey.
- * Created for compilers that don't support casting to unions.
  * @param key Key to be casted
  * @return The key as a DBKey union
  * @public
- * @see #DB_MANUAL_CAST_TO_UNION
  */
 DBKey db_str2key(const char *key)
 {
@@ -2488,7 +2481,6 @@ DBKey db_str2key(const char *key)
 	ret.str = key;
 	return ret;
 }
-#endif /* DB_MANUAL_CAST_TO_UNION */
 
 /**
  * Initializes the database system.
diff --git a/src/common/db.h b/src/common/db.h
index e5515803c..d4728cbbf 100644
--- a/src/common/db.h
+++ b/src/common/db.h
@@ -46,8 +46,6 @@
 
 /*****************************************************************************\
  *  (1) Section with public typedefs, enums, unions, structures and defines. *
- *  DB_MANUAL_CAST_TO_UNION - Define when the compiler doesn't allow casting *
- *           to unions.                                                      *
  *  DBRelease    - Enumeration of release options.                           *
  *  DBType       - Enumeration of database types.                            *
  *  DBOptions    - Bitfield enumeration of database options.                 *
@@ -62,19 +60,6 @@
 \*****************************************************************************/
 
 /**
- * Define this to enable the functions that cast to unions.
- * Required when the compiler doesn't support casting to unions.
- * NOTE: It is recommened that the conditional tests to determine if this 
- * should be defined be located in the configure script or a header file 
- * specific for compatibility and portability issues.
- * @public
- * @see #db_i2key(int)
- * @see #db_ui2key(unsigned int)
- * @see #db_str2key(unsigned char *)
- */
-//#define DB_MANUAL_CAST_TO_UNION
-
-/**
  * Bitfield with what should be released by the releaser function (if the
  * function supports it).
  * @public
@@ -575,42 +560,32 @@ struct DBMap {
 };
 
 //For easy access to the common functions.
-#ifdef DB_MANUAL_CAST_TO_UNION
-#	define i2key   db_i2key
-#	define ui2key  db_ui2key
-#	define str2key db_str2key
-#else /* not DB_MANUAL_CAST_TO_UNION */
-#	define i2key(k)   ((DBKey)(int)(k))
-#	define ui2key(k)  ((DBKey)(unsigned int)(k))
-#	define str2key(k) ((DBKey)(const char *)(k))
-#endif /* not DB_MANUAL_CAST_TO_UNION */
-
 #define db_exists(db,k)    ( (db)->exists((db),(k)) )
-#define idb_exists(db,k)   ( (db)->exists((db),i2key(k)) )
-#define uidb_exists(db,k)  ( (db)->exists((db),ui2key(k)) )
-#define strdb_exists(db,k) ( (db)->exists((db),str2key(k)) )
+#define idb_exists(db,k)   ( (db)->exists((db),db_i2key(k)) )
+#define uidb_exists(db,k)  ( (db)->exists((db),db_ui2key(k)) )
+#define strdb_exists(db,k) ( (db)->exists((db),db_str2key(k)) )
 
 #define db_get(db,k)    ( (db)->get((db),(k)) )
-#define idb_get(db,k)   ( (db)->get((db),i2key(k)) )
-#define uidb_get(db,k)  ( (db)->get((db),ui2key(k)) )
-#define strdb_get(db,k) ( (db)->get((db),str2key(k)) )
+#define idb_get(db,k)   ( (db)->get((db),db_i2key(k)) )
+#define uidb_get(db,k)  ( (db)->get((db),db_ui2key(k)) )
+#define strdb_get(db,k) ( (db)->get((db),db_str2key(k)) )
 
 #define db_put(db,k,d)    ( (db)->put((db),(k),(d)) )
-#define idb_put(db,k,d)   ( (db)->put((db),i2key(k),(d)) )
-#define uidb_put(db,k,d)  ( (db)->put((db),ui2key(k),(d)) )
-#define strdb_put(db,k,d) ( (db)->put((db),str2key(k),(d)) )
+#define idb_put(db,k,d)   ( (db)->put((db),db_i2key(k),(d)) )
+#define uidb_put(db,k,d)  ( (db)->put((db),db_ui2key(k),(d)) )
+#define strdb_put(db,k,d) ( (db)->put((db),db_str2key(k),(d)) )
 
 #define db_remove(db,k)    ( (db)->remove((db),(k)) )
-#define idb_remove(db,k)   ( (db)->remove((db),i2key(k)) )
-#define uidb_remove(db,k)  ( (db)->remove((db),ui2key(k)) )
-#define strdb_remove(db,k) ( (db)->remove((db),str2key(k)) )
+#define idb_remove(db,k)   ( (db)->remove((db),db_i2key(k)) )
+#define uidb_remove(db,k)  ( (db)->remove((db),db_ui2key(k)) )
+#define strdb_remove(db,k) ( (db)->remove((db),db_str2key(k)) )
 
 //These are discarding the possible vargs you could send to the function, so those
 //that require vargs must not use these defines.
 #define db_ensure(db,k,f)    ( (db)->ensure((db),(k),(f)) )
-#define idb_ensure(db,k,f)   ( (db)->ensure((db),i2key(k),(f)) )
-#define uidb_ensure(db,k,f)  ( (db)->ensure((db),ui2key(k),(f)) )
-#define strdb_ensure(db,k,f) ( (db)->ensure((db),str2key(k),(f)) )
+#define idb_ensure(db,k,f)   ( (db)->ensure((db),db_i2key(k),(f)) )
+#define uidb_ensure(db,k,f)  ( (db)->ensure((db),db_ui2key(k),(f)) )
+#define strdb_ensure(db,k,f) ( (db)->ensure((db),db_str2key(k),(f)) )
 
 // Database creation and destruction macros
 #define idb_alloc(opt)            db_alloc(__FILE__,__LINE__,DB_INT,(opt),sizeof(int))
@@ -729,37 +704,29 @@ DBReleaser db_custom_release(DBRelease which);
  */
 DBMap* db_alloc(const char *file, int line, DBType type, DBOptions options, unsigned short maxlen);
 
-#ifdef DB_MANUAL_CAST_TO_UNION
 /**
  * Manual cast from 'int' to the union DBKey.
- * Created for compilers that don't support casting to unions.
  * @param key Key to be casted
  * @return The key as a DBKey union
  * @public
- * @see #DB_MANUAL_CAST_TO_UNION
  */
 DBKey db_i2key(int key);
 
 /**
  * Manual cast from 'unsigned int' to the union DBKey.
- * Created for compilers that don't support casting to unions.
  * @param key Key to be casted
  * @return The key as a DBKey union
  * @public
- * @see #DB_MANUAL_CAST_TO_UNION
  */
 DBKey db_ui2key(unsigned int key);
 
 /**
  * Manual cast from 'unsigned char *' to the union DBKey.
- * Created for compilers that don't support casting to unions.
  * @param key Key to be casted
  * @return The key as a DBKey union
  * @public
- * @see #DB_MANUAL_CAST_TO_UNION
  */
 DBKey db_str2key(const char *key);
-#endif /* DB_MANUAL_CAST_TO_UNION */
 
 /**
  * Initialize the database system.
diff --git a/src/common/mmo.h b/src/common/mmo.h
index f8ef63390..2b39bf6d8 100644
--- a/src/common/mmo.h
+++ b/src/common/mmo.h
@@ -47,6 +47,7 @@
 	#define PACKETVER 20110609
 	//#define PACKETVER	20100730
 #endif
+
 // backward compatible PACKETVER 8 and 9
 #if PACKETVER == 8
 #undef PACKETVER
diff --git a/src/map/clif.h b/src/map/clif.h
index 8b6271075..def1178fd 100644
--- a/src/map/clif.h
+++ b/src/map/clif.h
@@ -6,6 +6,7 @@
 
 #include "../common/cbasetypes.h"
 //#include "../common/mmo.h"
+struct item;
 struct storage_data;
 struct guild_storage;
 //#include "map.h"
diff --git a/src/map/guild.c b/src/map/guild.c
index 8c5988dc8..49d92914e 100644
--- a/src/map/guild.c
+++ b/src/map/guild.c
@@ -1155,7 +1155,7 @@ unsigned int guild_payexp(struct map_session_data *sd,unsigned int exp)
 		exp = exp * per / 100;
 	//Otherwise tax everything.
 	
-	c = (struct guild_expcache*)guild_expcache_db->ensure(guild_expcache_db, i2key(sd->status.char_id), create_expcache, sd);
+	c = (struct guild_expcache*)guild_expcache_db->ensure(guild_expcache_db, db_i2key(sd->status.char_id), create_expcache, sd);
 
 	if (c->exp > UINT64_MAX - exp)
 		c->exp = UINT64_MAX;
@@ -1174,7 +1174,7 @@ int guild_getexp(struct map_session_data *sd,int exp)
 	if (sd->status.guild_id == 0 || guild_search(sd->status.guild_id) == NULL)
 		return 0;
 
-	c = (struct guild_expcache*)guild_expcache_db->ensure(guild_expcache_db, i2key(sd->status.char_id), create_expcache, sd);
+	c = (struct guild_expcache*)guild_expcache_db->ensure(guild_expcache_db, db_i2key(sd->status.char_id), create_expcache, sd);
 	if (c->exp > UINT64_MAX - exp)
 		c->exp = UINT64_MAX;
 	else
diff --git a/vcproj-10/char-server_sql.vcxproj b/vcproj-10/char-server_sql.vcxproj
index c837f8da7..1ed50b62f 100644
--- a/vcproj-10/char-server_sql.vcxproj
+++ b/vcproj-10/char-server_sql.vcxproj
@@ -52,7 +52,7 @@
     <ClCompile>
       <Optimization>Disabled</Optimization>
       <AdditionalIncludeDirectories>..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <PreprocessToFile>false</PreprocessToFile>
       <PreprocessSuppressLineNumbers>false</PreprocessSuppressLineNumbers>
       <ExceptionHandling>
@@ -95,7 +95,7 @@
       <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
       <WholeProgramOptimization>true</WholeProgramOptimization>
       <AdditionalIncludeDirectories>..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
       <AdditionalOptions>
diff --git a/vcproj-10/char-server_txt.vcxproj b/vcproj-10/char-server_txt.vcxproj
index 0d287e5a2..ab79961a3 100644
--- a/vcproj-10/char-server_txt.vcxproj
+++ b/vcproj-10/char-server_txt.vcxproj
@@ -52,7 +52,7 @@
     <ClCompile>
       <Optimization>Disabled</Optimization>
       <AdditionalIncludeDirectories>..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <PreprocessToFile>false</PreprocessToFile>
       <PreprocessSuppressLineNumbers>false</PreprocessSuppressLineNumbers>
       <ExceptionHandling>
@@ -94,7 +94,7 @@
       <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
       <WholeProgramOptimization>true</WholeProgramOptimization>
       <AdditionalIncludeDirectories>..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
       <AdditionalOptions>
diff --git a/vcproj-10/login-server_sql.vcxproj b/vcproj-10/login-server_sql.vcxproj
index 66b20780d..34f5a33af 100644
--- a/vcproj-10/login-server_sql.vcxproj
+++ b/vcproj-10/login-server_sql.vcxproj
@@ -52,7 +52,7 @@
     <ClCompile>
       <Optimization>Disabled</Optimization>
       <AdditionalIncludeDirectories>..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;WITH_SQL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;WITH_SQL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <PreprocessToFile>false</PreprocessToFile>
       <PreprocessSuppressLineNumbers>false</PreprocessSuppressLineNumbers>
       <ExceptionHandling>
@@ -95,7 +95,7 @@
       <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
       <WholeProgramOptimization>true</WholeProgramOptimization>
       <AdditionalIncludeDirectories>..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;WITH_SQL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;WITH_SQL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
       <AdditionalOptions>
diff --git a/vcproj-10/login-server_txt.vcxproj b/vcproj-10/login-server_txt.vcxproj
index ab2a9772f..f80d368b5 100644
--- a/vcproj-10/login-server_txt.vcxproj
+++ b/vcproj-10/login-server_txt.vcxproj
@@ -50,7 +50,7 @@
     <ClCompile>
       <Optimization>Disabled</Optimization>
       <AdditionalIncludeDirectories>..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;WITH_TXT;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;WITH_TXT;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <PreprocessToFile>false</PreprocessToFile>
       <PreprocessSuppressLineNumbers>false</PreprocessSuppressLineNumbers>
       <ExceptionHandling>
@@ -93,7 +93,7 @@
       <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
       <WholeProgramOptimization>true</WholeProgramOptimization>
       <AdditionalIncludeDirectories>..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;WITH_TXT;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;WITH_TXT;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
       <AdditionalOptions>
diff --git a/vcproj-10/map-server_sql.vcxproj b/vcproj-10/map-server_sql.vcxproj
index e6cbdcef4..daa739ba0 100644
--- a/vcproj-10/map-server_sql.vcxproj
+++ b/vcproj-10/map-server_sql.vcxproj
@@ -51,7 +51,7 @@
     <ClCompile>
       <Optimization>Disabled</Optimization>
       <AdditionalIncludeDirectories>..\3rdparty\mysql\include;..\3rdparty\zlib\include;..\3rdparty\pcre\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;PCRE_SUPPORT;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;PCRE_SUPPORT;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <PreprocessToFile>false</PreprocessToFile>
       <PreprocessSuppressLineNumbers>false</PreprocessSuppressLineNumbers>
       <ExceptionHandling>
@@ -94,7 +94,7 @@
       <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
       <WholeProgramOptimization>true</WholeProgramOptimization>
       <AdditionalIncludeDirectories>..\3rdparty\mysql\include;..\3rdparty\zlib\include;..\3rdparty\pcre\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;PCRE_SUPPORT;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;PCRE_SUPPORT;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
       <AdditionalOptions>
diff --git a/vcproj-10/map-server_txt.vcxproj b/vcproj-10/map-server_txt.vcxproj
index 272e16c57..83f16a8b5 100644
--- a/vcproj-10/map-server_txt.vcxproj
+++ b/vcproj-10/map-server_txt.vcxproj
@@ -50,7 +50,7 @@
     <ClCompile>
       <Optimization>Disabled</Optimization>
       <AdditionalIncludeDirectories>..\3rdparty\zlib\include;..\3rdparty\pcre\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;PCRE_SUPPORT;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;PCRE_SUPPORT;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <PreprocessToFile>false</PreprocessToFile>
       <PreprocessSuppressLineNumbers>false</PreprocessSuppressLineNumbers>
       <ExceptionHandling>
@@ -93,7 +93,7 @@
       <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
       <WholeProgramOptimization>true</WholeProgramOptimization>
       <AdditionalIncludeDirectories>..\3rdparty\zlib\include;..\3rdparty\pcre\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;PCRE_SUPPORT;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;PCRE_SUPPORT;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
       <FunctionLevelLinking>false</FunctionLevelLinking>
diff --git a/vcproj-10/txt-converter-char.vcxproj b/vcproj-10/txt-converter-char.vcxproj
index 88e79604f..7064df852 100644
--- a/vcproj-10/txt-converter-char.vcxproj
+++ b/vcproj-10/txt-converter-char.vcxproj
@@ -52,7 +52,7 @@
     <ClCompile>
       <Optimization>Disabled</Optimization>
       <AdditionalIncludeDirectories>..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;MINICORE;TXT_SQL_CONVERT;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;MINICORE;TXT_SQL_CONVERT;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <PreprocessToFile>false</PreprocessToFile>
       <PreprocessSuppressLineNumbers>false</PreprocessSuppressLineNumbers>
       <ExceptionHandling>
@@ -94,7 +94,7 @@
       <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
       <WholeProgramOptimization>true</WholeProgramOptimization>
       <AdditionalIncludeDirectories>..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;MINICORE;TXT_SQL_CONVERT;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;MINICORE;TXT_SQL_CONVERT;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
       <AdditionalOptions>
diff --git a/vcproj-10/txt-converter-login.vcxproj b/vcproj-10/txt-converter-login.vcxproj
index 26e87b993..06c3a8b6c 100644
--- a/vcproj-10/txt-converter-login.vcxproj
+++ b/vcproj-10/txt-converter-login.vcxproj
@@ -52,7 +52,7 @@
     <ClCompile>
       <Optimization>Disabled</Optimization>
       <AdditionalIncludeDirectories>..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;MINICORE;WITH_TXT;WITH_SQL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;MINICORE;WITH_TXT;WITH_SQL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <PreprocessToFile>false</PreprocessToFile>
       <PreprocessSuppressLineNumbers>false</PreprocessSuppressLineNumbers>
       <ExceptionHandling>
@@ -94,7 +94,7 @@
       <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
       <WholeProgramOptimization>true</WholeProgramOptimization>
       <AdditionalIncludeDirectories>..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
-      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;MINICORE;WITH_TXT;WITH_SQL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;MINICORE;WITH_TXT;WITH_SQL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <StringPooling>true</StringPooling>
       <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
       <AdditionalOptions>
diff --git a/vcproj-9/char-server_sql.vcproj b/vcproj-9/char-server_sql.vcproj
index 759fd4f83..557b6e149 100644
--- a/vcproj-9/char-server_sql.vcproj
+++ b/vcproj-9/char-server_sql.vcproj
@@ -44,7 +44,7 @@
 				AdditionalOptions="/MP"
 				Optimization="0"
 				AdditionalIncludeDirectories="..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;FD_SETSIZE=4096"
 				GeneratePreprocessedFile="0"
 				ExceptionHandling="0"
 				BasicRuntimeChecks="3"
@@ -55,7 +55,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="4"
 				CompileAs="1"
-				DisableSpecificWarnings="4800"
+				DisableSpecificWarnings="4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -138,7 +138,7 @@
 				EnableFiberSafeOptimizations="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;FD_SETSIZE=4096"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				DefaultCharIsUnsigned="false"
@@ -146,7 +146,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="3"
 				CompileAs="1"
-				DisableSpecificWarnings="4800"
+				DisableSpecificWarnings="4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
diff --git a/vcproj-9/char-server_txt.vcproj b/vcproj-9/char-server_txt.vcproj
index 690607970..be7ada4fc 100644
--- a/vcproj-9/char-server_txt.vcproj
+++ b/vcproj-9/char-server_txt.vcproj
@@ -44,7 +44,7 @@
 				AdditionalOptions="/MP"
 				Optimization="0"
 				AdditionalIncludeDirectories="..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;TXT_ONLY;FD_SETSIZE=4096"
 				GeneratePreprocessedFile="0"
 				ExceptionHandling="0"
 				BasicRuntimeChecks="3"
@@ -55,7 +55,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="4"
 				CompileAs="1"
-				DisableSpecificWarnings="4800"
+				DisableSpecificWarnings="4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -137,7 +137,7 @@
 				EnableFiberSafeOptimizations="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;TXT_ONLY;FD_SETSIZE=4096"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				DefaultCharIsUnsigned="false"
@@ -145,7 +145,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="3"
 				CompileAs="1"
-				DisableSpecificWarnings="4800"
+				DisableSpecificWarnings="4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
diff --git a/vcproj-9/dbghelpplug.vcproj b/vcproj-9/dbghelpplug.vcproj
index ea13e2f00..164e7424c 100644
--- a/vcproj-9/dbghelpplug.vcproj
+++ b/vcproj-9/dbghelpplug.vcproj
@@ -41,7 +41,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
-				PreprocessorDefinitions="WIN32;_DEBUG;_WINDOWS;_USRDLL;DBGHELPPLUG_EXPORTS;_CRT_SECURE_NO_DEPRECATE"
+				PreprocessorDefinitions="WIN32;_DEBUG;_WINDOWS;_USRDLL;DBGHELPPLUG_EXPORTS"
 				StringPooling="false"
 				MinimalRebuild="true"
 				ExceptionHandling="0"
@@ -55,6 +55,7 @@
 				Detect64BitPortabilityProblems="true"
 				DebugInformationFormat="4"
 				CompileAs="1"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -126,7 +127,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="2"
-				PreprocessorDefinitions="WIN32;NDEBUG;_WINDOWS;_USRDLL;DBGHELPPLUG_EXPORTS;_CRT_SECURE_NO_DEPRECATE"
+				PreprocessorDefinitions="WIN32;NDEBUG;_WINDOWS;_USRDLL;DBGHELPPLUG_EXPORTS"
 				StringPooling="true"
 				MinimalRebuild="false"
 				ExceptionHandling="0"
@@ -141,6 +142,7 @@
 				Detect64BitPortabilityProblems="true"
 				DebugInformationFormat="0"
 				CompileAs="1"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
diff --git a/vcproj-9/login-server_sql.vcproj b/vcproj-9/login-server_sql.vcproj
index f962b88fa..d2f9d34d9 100644
--- a/vcproj-9/login-server_sql.vcproj
+++ b/vcproj-9/login-server_sql.vcproj
@@ -44,7 +44,7 @@
 				AdditionalOptions="/MP"
 				Optimization="0"
 				AdditionalIncludeDirectories="..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;WITH_SQL"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;FD_SETSIZE=4096;WITH_SQL"
 				GeneratePreprocessedFile="0"
 				ExceptionHandling="0"
 				BasicRuntimeChecks="3"
@@ -55,7 +55,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="4"
 				CompileAs="1"
-				DisableSpecificWarnings="4100;4800"
+				DisableSpecificWarnings="4100;4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -138,7 +138,7 @@
 				EnableFiberSafeOptimizations="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="..\3rdparty\mysql\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;WITH_SQL"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;FD_SETSIZE=4096;WITH_SQL"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				DefaultCharIsUnsigned="false"
@@ -148,7 +148,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="3"
 				CompileAs="1"
-				DisableSpecificWarnings="4100;4800"
+				DisableSpecificWarnings="4100;4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
diff --git a/vcproj-9/login-server_txt.vcproj b/vcproj-9/login-server_txt.vcproj
index 7bc8b7d56..39c4bfdf5 100644
--- a/vcproj-9/login-server_txt.vcproj
+++ b/vcproj-9/login-server_txt.vcproj
@@ -43,7 +43,7 @@
 				AdditionalOptions="/MP"
 				Optimization="0"
 				AdditionalIncludeDirectories="..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;WITH_TXT"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;FD_SETSIZE=4096;WITH_TXT"
 				GeneratePreprocessedFile="0"
 				ExceptionHandling="0"
 				BasicRuntimeChecks="3"
@@ -54,7 +54,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="4"
 				CompileAs="1"
-				DisableSpecificWarnings="4100;4800"
+				DisableSpecificWarnings="4100;4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -136,7 +136,7 @@
 				EnableFiberSafeOptimizations="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;WITH_TXT"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;FD_SETSIZE=4096;WITH_TXT"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				DefaultCharIsUnsigned="false"
@@ -144,7 +144,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="3"
 				CompileAs="1"
-				DisableSpecificWarnings="4100;4800"
+				DisableSpecificWarnings="4100;4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
diff --git a/vcproj-9/map-server_sql.vcproj b/vcproj-9/map-server_sql.vcproj
index d743bf0ed..14c807bcb 100644
--- a/vcproj-9/map-server_sql.vcproj
+++ b/vcproj-9/map-server_sql.vcproj
@@ -43,7 +43,7 @@
 				AdditionalOptions="/MP"
 				Optimization="0"
 				AdditionalIncludeDirectories="..\3rdparty\mysql\include;..\3rdparty\zlib\include;..\3rdparty\pcre\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;PCRE_SUPPORT;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;PCRE_SUPPORT;FD_SETSIZE=4096"
 				GeneratePreprocessedFile="0"
 				ExceptionHandling="0"
 				BasicRuntimeChecks="3"
@@ -54,7 +54,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="4"
 				CompileAs="1"
-				DisableSpecificWarnings="4018;4100;4800"
+				DisableSpecificWarnings="4018;4100;4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -137,7 +137,7 @@
 				EnableFiberSafeOptimizations="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="..\3rdparty\mysql\include;..\3rdparty\zlib\include;..\3rdparty\pcre\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;PCRE_SUPPORT;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;PCRE_SUPPORT;FD_SETSIZE=4096"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				DefaultCharIsUnsigned="false"
@@ -145,7 +145,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="3"
 				CompileAs="1"
-				DisableSpecificWarnings="4018;4100;4800"
+				DisableSpecificWarnings="4018;4100;4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
diff --git a/vcproj-9/map-server_txt.vcproj b/vcproj-9/map-server_txt.vcproj
index 9e8abc1fd..e499c9035 100644
--- a/vcproj-9/map-server_txt.vcproj
+++ b/vcproj-9/map-server_txt.vcproj
@@ -43,7 +43,7 @@
 				AdditionalOptions="/MP"
 				Optimization="0"
 				AdditionalIncludeDirectories="..\3rdparty\zlib\include;..\3rdparty\pcre\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;PCRE_SUPPORT;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;PCRE_SUPPORT;TXT_ONLY;FD_SETSIZE=4096"
 				GeneratePreprocessedFile="0"
 				ExceptionHandling="0"
 				BasicRuntimeChecks="3"
@@ -54,7 +54,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="4"
 				CompileAs="1"
-				DisableSpecificWarnings="4018;4100;4800"
+				DisableSpecificWarnings="4018;4100;4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -136,7 +136,7 @@
 				EnableFiberSafeOptimizations="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="..\3rdparty\zlib\include;..\3rdparty\pcre\include;..\3rdparty\msinttypes\include;..\3rdparty\mt19937ar"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;PCRE_SUPPORT;TXT_ONLY;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;PCRE_SUPPORT;TXT_ONLY;FD_SETSIZE=4096"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				EnableFunctionLevelLinking="false"
@@ -145,7 +145,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="3"
 				CompileAs="1"
-				DisableSpecificWarnings="4018;4100;4800"
+				DisableSpecificWarnings="4018;4100;4800;4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
diff --git a/vcproj-9/mapcache.vcproj b/vcproj-9/mapcache.vcproj
index 94245c054..645ae0b5e 100644
--- a/vcproj-9/mapcache.vcproj
+++ b/vcproj-9/mapcache.vcproj
@@ -43,7 +43,7 @@
 				AdditionalOptions="/MP"
 				Optimization="0"
 				AdditionalIncludeDirectories="..\3rdparty\zlib\include;..\3rdparty\msinttypes\include"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;MINICORE"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;MINICORE"
 				GeneratePreprocessedFile="0"
 				ExceptionHandling="0"
 				BasicRuntimeChecks="3"
@@ -54,6 +54,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="4"
 				CompileAs="1"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -135,7 +136,7 @@
 				EnableFiberSafeOptimizations="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="..\3rdparty\zlib\include;..\3rdparty\msinttypes\include"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;MINICORE"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;MINICORE"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				EnableFunctionLevelLinking="false"
@@ -144,6 +145,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="3"
 				CompileAs="1"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
diff --git a/vcproj-9/plugin-console.vcproj b/vcproj-9/plugin-console.vcproj
index 30337a0c1..9a13c2526 100644
--- a/vcproj-9/plugin-console.vcproj
+++ b/vcproj-9/plugin-console.vcproj
@@ -2,8 +2,9 @@
 <VisualStudioProject
 	ProjectType="Visual C++"
 	Version="9.00"
-	Name="console"
+	Name="plugin-console"
 	ProjectGUID="{73E1101A-310C-4453-8F45-FD2795ABEF15}"
+	RootNamespace="plugin-console"
 	TargetFrameworkVersion="0"
 	>
 	<Platforms>
@@ -16,12 +17,9 @@
 	<Configurations>
 		<Configuration
 			Name="Debug|Win32"
-			OutputDirectory=".\Debug/console"
-			IntermediateDirectory=".\Debug/console"
+			OutputDirectory="..\plugins"
+			IntermediateDirectory="$(ProjectName)\$(ConfigurationName)"
 			ConfigurationType="2"
-			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC60.vsprops"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
 			CharacterSet="2"
 			>
 			<Tool
@@ -38,28 +36,18 @@
 			/>
 			<Tool
 				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				GenerateStublessProxies="true"
-				TypeLibraryName=".\Debug/console/console.tlb"
-				HeaderFileName=""
 			/>
 			<Tool
 				Name="VCCLCompilerTool"
 				AdditionalOptions="/MP"
 				Optimization="0"
 				AdditionalIncludeDirectories="../3rdparty/msinttypes/include"
-				PreprocessorDefinitions="_DEBUG;WIN32;_WINDOWS;_USRDLL;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE"
+				PreprocessorDefinitions="_DEBUG;WIN32;_WINDOWS;_USRDLL"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="1"
-				PrecompiledHeaderFile=".\Debug/console/console.pch"
-				AssemblerListingLocation=".\Debug/console/"
-				ObjectFile=".\Debug/console/"
-				ProgramDataBaseFileName=".\Debug/console/"
 				WarningLevel="3"
-				SuppressStartupBanner="true"
-				DebugInformationFormat="4"
+				DebugInformationFormat="3"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -74,15 +62,13 @@
 			/>
 			<Tool
 				Name="VCLinkerTool"
-				OutputFile="../plugins/console.dll"
-				LinkIncremental="2"
-				SuppressStartupBanner="true"
+				OutputFile="$(OutDir)\console.dll"
+				LinkIncremental="1"
 				ModuleDefinitionFile="..\src\plugins\console.def"
 				GenerateDebugInformation="true"
-				ProgramDatabaseFile="../plugins/console.pdb"
+				ProgramDatabaseFile="$(IntDir)\$(TargetName).pdb"
 				RandomizedBaseAddress="1"
-				DataExecutionPrevention="0"
-				ImportLibrary=".\Debug/console/console.lib"
+				ImportLibrary="$(IntDir)\$(TargetName).lib"
 				TargetMachine="1"
 			/>
 			<Tool
@@ -96,8 +82,6 @@
 			/>
 			<Tool
 				Name="VCBscMakeTool"
-				SuppressStartupBanner="true"
-				OutputFile=".\Debug/console/console.bsc"
 			/>
 			<Tool
 				Name="VCFxCopTool"
@@ -111,12 +95,9 @@
 		</Configuration>
 		<Configuration
 			Name="Release|Win32"
-			OutputDirectory=".\Release/console"
-			IntermediateDirectory=".\Release/console"
+			OutputDirectory="..\plugins"
+			IntermediateDirectory="$(ProjectName)\$(ConfigurationName)"
 			ConfigurationType="2"
-			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC60.vsprops"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
 			CharacterSet="2"
 			>
 			<Tool
@@ -133,12 +114,6 @@
 			/>
 			<Tool
 				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				GenerateStublessProxies="true"
-				TypeLibraryName=".\Release/console/console.tlb"
-				HeaderFileName=""
 			/>
 			<Tool
 				Name="VCCLCompilerTool"
@@ -146,16 +121,13 @@
 				Optimization="2"
 				InlineFunctionExpansion="1"
 				AdditionalIncludeDirectories="../3rdparty/msinttypes/include"
-				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;_USRDLL;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE"
+				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;_USRDLL"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				EnableFunctionLevelLinking="true"
-				PrecompiledHeaderFile=".\Release/console/console.pch"
-				AssemblerListingLocation=".\Release/console/"
-				ObjectFile=".\Release/console/"
-				ProgramDataBaseFileName=".\Release/console/"
 				WarningLevel="3"
-				SuppressStartupBanner="true"
+				DebugInformationFormat="3"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -170,14 +142,13 @@
 			/>
 			<Tool
 				Name="VCLinkerTool"
-				OutputFile="../plugins/console.dll"
+				OutputFile="$(OutDir)\console.dll"
 				LinkIncremental="1"
-				SuppressStartupBanner="true"
 				ModuleDefinitionFile="..\src\plugins\console.def"
-				ProgramDatabaseFile="../plugins/console.pdb"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(IntDir)\$(TargetName).pdb"
 				RandomizedBaseAddress="1"
-				DataExecutionPrevention="0"
-				ImportLibrary=".\Release/console/console.lib"
+				ImportLibrary="$(IntDir)\$(TargetName).lib"
 				TargetMachine="1"
 			/>
 			<Tool
@@ -191,8 +162,6 @@
 			/>
 			<Tool
 				Name="VCBscMakeTool"
-				SuppressStartupBanner="true"
-				OutputFile=".\Release/console/console.bsc"
 			/>
 			<Tool
 				Name="VCFxCopTool"
@@ -211,24 +180,6 @@
 		<File
 			RelativePath="..\src\plugins\console.c"
 			>
-			<FileConfiguration
-				Name="Debug|Win32"
-				>
-				<Tool
-					Name="VCCLCompilerTool"
-					AdditionalIncludeDirectories=""
-					PreprocessorDefinitions=""
-				/>
-			</FileConfiguration>
-			<FileConfiguration
-				Name="Release|Win32"
-				>
-				<Tool
-					Name="VCCLCompilerTool"
-					AdditionalIncludeDirectories=""
-					PreprocessorDefinitions=""
-				/>
-			</FileConfiguration>
 		</File>
 		<File
 			RelativePath="..\src\plugins\console.def"
diff --git a/vcproj-9/plugin-pid.vcproj b/vcproj-9/plugin-pid.vcproj
index caa9a91df..2dea26fcd 100644
--- a/vcproj-9/plugin-pid.vcproj
+++ b/vcproj-9/plugin-pid.vcproj
@@ -2,8 +2,9 @@
 <VisualStudioProject
 	ProjectType="Visual C++"
 	Version="9.00"
-	Name="pid"
+	Name="plugin-pid"
 	ProjectGUID="{9509E1B9-DA2B-4153-9EE0-CBCA6597F198}"
+	RootNamespace="plugin-pid"
 	TargetFrameworkVersion="0"
 	>
 	<Platforms>
@@ -16,12 +17,9 @@
 	<Configurations>
 		<Configuration
 			Name="Debug|Win32"
-			OutputDirectory=".\Debug/pid"
-			IntermediateDirectory=".\Debug/pid"
+			OutputDirectory="..\plugins"
+			IntermediateDirectory="$(ProjectName)\$(ConfigurationName)"
 			ConfigurationType="2"
-			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC60.vsprops"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
 			CharacterSet="2"
 			>
 			<Tool
@@ -38,28 +36,18 @@
 			/>
 			<Tool
 				Name="VCMIDLTool"
-				PreprocessorDefinitions="_DEBUG"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				GenerateStublessProxies="true"
-				TypeLibraryName=".\Debug/pid/pid.tlb"
-				HeaderFileName=""
 			/>
 			<Tool
 				Name="VCCLCompilerTool"
 				AdditionalOptions="/MP"
 				Optimization="0"
 				AdditionalIncludeDirectories="../3rdparty/msinttypes/include"
-				PreprocessorDefinitions="_DEBUG;WIN32;_WINDOWS;_USRDLL;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE"
+				PreprocessorDefinitions="_DEBUG;WIN32;_WINDOWS;_USRDLL"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="1"
-				PrecompiledHeaderFile=".\Debug/pid/pid.pch"
-				AssemblerListingLocation=".\Debug/pid/"
-				ObjectFile=".\Debug/pid/"
-				ProgramDataBaseFileName=".\Debug/pid/"
 				WarningLevel="3"
-				SuppressStartupBanner="true"
-				DebugInformationFormat="4"
+				DebugInformationFormat="3"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -74,15 +62,13 @@
 			/>
 			<Tool
 				Name="VCLinkerTool"
-				OutputFile="../plugins/pid.dll"
-				LinkIncremental="2"
-				SuppressStartupBanner="true"
+				OutputFile="$(OutDir)\pid.dll"
+				LinkIncremental="1"
 				ModuleDefinitionFile="..\src\plugins\pid.def"
 				GenerateDebugInformation="true"
-				ProgramDatabaseFile="../plugins/pid.pdb"
+				ProgramDatabaseFile="$(IntDir)\$(TargetName).pdb"
 				RandomizedBaseAddress="1"
-				DataExecutionPrevention="0"
-				ImportLibrary=".\Debug/pid/pid.lib"
+				ImportLibrary="$(IntDir)\$(TargetName).lib"
 				TargetMachine="1"
 			/>
 			<Tool
@@ -96,8 +82,6 @@
 			/>
 			<Tool
 				Name="VCBscMakeTool"
-				SuppressStartupBanner="true"
-				OutputFile=".\Debug/pid/pid.bsc"
 			/>
 			<Tool
 				Name="VCFxCopTool"
@@ -111,12 +95,9 @@
 		</Configuration>
 		<Configuration
 			Name="Release|Win32"
-			OutputDirectory=".\Release/pid"
-			IntermediateDirectory=".\Release/pid"
+			OutputDirectory="..\plugins"
+			IntermediateDirectory="$(ProjectName)\$(ConfigurationName)"
 			ConfigurationType="2"
-			InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC60.vsprops"
-			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="false"
 			CharacterSet="2"
 			>
 			<Tool
@@ -133,12 +114,6 @@
 			/>
 			<Tool
 				Name="VCMIDLTool"
-				PreprocessorDefinitions="NDEBUG"
-				SuppressStartupBanner="true"
-				TargetEnvironment="1"
-				GenerateStublessProxies="true"
-				TypeLibraryName=".\Release/pid/pid.tlb"
-				HeaderFileName=""
 			/>
 			<Tool
 				Name="VCCLCompilerTool"
@@ -146,16 +121,13 @@
 				Optimization="2"
 				InlineFunctionExpansion="1"
 				AdditionalIncludeDirectories="../3rdparty/msinttypes/include"
-				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;_USRDLL;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE"
+				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;_USRDLL"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				EnableFunctionLevelLinking="true"
-				PrecompiledHeaderFile=".\Release/pid/pid.pch"
-				AssemblerListingLocation=".\Release/pid/"
-				ObjectFile=".\Release/pid/"
-				ProgramDataBaseFileName=".\Release/pid/"
 				WarningLevel="3"
-				SuppressStartupBanner="true"
+				DebugInformationFormat="3"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -170,14 +142,13 @@
 			/>
 			<Tool
 				Name="VCLinkerTool"
-				OutputFile="../plugins/pid.dll"
+				OutputFile="$(OutDir)\pid.dll"
 				LinkIncremental="1"
-				SuppressStartupBanner="true"
 				ModuleDefinitionFile="..\src\plugins\pid.def"
-				ProgramDatabaseFile="../plugins/pid.pdb"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(IntDir)\$(TargetName).pdb"
 				RandomizedBaseAddress="1"
-				DataExecutionPrevention="0"
-				ImportLibrary=".\Release/pid/pid.lib"
+				ImportLibrary="$(IntDir)\$(TargetName).lib"
 				TargetMachine="1"
 			/>
 			<Tool
@@ -191,8 +162,6 @@
 			/>
 			<Tool
 				Name="VCBscMakeTool"
-				SuppressStartupBanner="true"
-				OutputFile=".\Release/pid/pid.bsc"
 			/>
 			<Tool
 				Name="VCFxCopTool"
@@ -211,24 +180,6 @@
 		<File
 			RelativePath="..\src\plugins\pid.c"
 			>
-			<FileConfiguration
-				Name="Debug|Win32"
-				>
-				<Tool
-					Name="VCCLCompilerTool"
-					AdditionalIncludeDirectories=""
-					PreprocessorDefinitions=""
-				/>
-			</FileConfiguration>
-			<FileConfiguration
-				Name="Release|Win32"
-				>
-				<Tool
-					Name="VCCLCompilerTool"
-					AdditionalIncludeDirectories=""
-					PreprocessorDefinitions=""
-				/>
-			</FileConfiguration>
 		</File>
 		<File
 			RelativePath="..\src\plugins\pid.def"
diff --git a/vcproj-9/txt-converter-char.vcproj b/vcproj-9/txt-converter-char.vcproj
index 6d9b6a846..ea0ee49eb 100644
--- a/vcproj-9/txt-converter-char.vcproj
+++ b/vcproj-9/txt-converter-char.vcproj
@@ -44,7 +44,7 @@
 				AdditionalOptions="/MP"
 				Optimization="0"
 				AdditionalIncludeDirectories="..\3rdparty\mysql\include;..\3rdparty\msinttypes\include"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;MINICORE;TXT_SQL_CONVERT"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;FD_SETSIZE=4096;MINICORE;TXT_SQL_CONVERT"
 				GeneratePreprocessedFile="0"
 				ExceptionHandling="0"
 				BasicRuntimeChecks="3"
@@ -55,6 +55,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="4"
 				CompileAs="1"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -137,7 +138,7 @@
 				EnableFiberSafeOptimizations="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="..\3rdparty\mysql\include;..\3rdparty\msinttypes\include"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;MINICORE;TXT_SQL_CONVERT"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;FD_SETSIZE=4096;MINICORE;TXT_SQL_CONVERT"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				DefaultCharIsUnsigned="false"
@@ -147,6 +148,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="3"
 				CompileAs="1"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
diff --git a/vcproj-9/txt-converter-login.vcproj b/vcproj-9/txt-converter-login.vcproj
index e69a7c20c..26e640e6f 100644
--- a/vcproj-9/txt-converter-login.vcproj
+++ b/vcproj-9/txt-converter-login.vcproj
@@ -44,7 +44,7 @@
 				AdditionalOptions="/MP"
 				Optimization="0"
 				AdditionalIncludeDirectories="..\3rdparty\mysql\include;..\3rdparty\msinttypes\include"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;MINICORE;WITH_TXT;WITH_SQL"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;_DEBUG;FD_SETSIZE=4096;MINICORE;WITH_TXT;WITH_SQL"
 				GeneratePreprocessedFile="0"
 				ExceptionHandling="0"
 				BasicRuntimeChecks="3"
@@ -55,6 +55,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="4"
 				CompileAs="1"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
@@ -137,7 +138,7 @@
 				EnableFiberSafeOptimizations="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="..\3rdparty\mysql\include;..\3rdparty\msinttypes\include"
-				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_DEPRECATE;FD_SETSIZE=4096;DB_MANUAL_CAST_TO_UNION;MINICORE;WITH_TXT;WITH_SQL"
+				PreprocessorDefinitions="WIN32;_WIN32;__WIN32;NDEBUG;FD_SETSIZE=4096;MINICORE;WITH_TXT;WITH_SQL"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				DefaultCharIsUnsigned="false"
@@ -147,6 +148,7 @@
 				WarningLevel="3"
 				DebugInformationFormat="3"
 				CompileAs="1"
+				DisableSpecificWarnings="4996"
 			/>
 			<Tool
 				Name="VCManagedResourceCompilerTool"
diff --git a/zlib1.dll b/zlib1.dll
index 1cf8a476e..4296800a1 100644
--- a/zlib1.dll
+++ b/zlib1.dll