// $Id: ladmin.c,v 1.1.1.1 2004/09/10 17:26:52 MagicalTux Exp $
///////////////////////////////////////////////////////////////////////////
// EAthena login-server remote administration tool
// Ladamin in C by [Yor]
// if you modify this software, modify ladmin in tool too.
///////////////////////////////////////////////////////////////////////////
#include <sys/types.h>
#include <sys/socket.h>
#include <stdio.h>
#include <stdlib.h>
#include <netinet/in.h>
#include <sys/time.h> // gettimeofday
#include <time.h>
#include <sys/ioctl.h>
#include <unistd.h> // close
#include <signal.h>
#include <fcntl.h>
#include <string.h> // str*
#include <arpa/inet.h> // inet_addr
#include <netdb.h> // gethostbyname
#include <stdarg.h> // valist
#include <ctype.h> // tolower
#include "core.h"
#include "socket.h"
#include "ladmin.h"
#include "version.h"
#include "mmo.h"
#ifdef PASSWORDENC
#include "md5calc.h"
#endif
#ifdef MEMWATCH
#include "memwatch.h"
#endif
//-------------------------------INSTRUCTIONS------------------------------
// Set the variables below:
// IP of the login server.
// Port where the login-server listens incoming packets.
// Password of administration (same of config_athena.conf).
// Displayed language of the sofware (if not correct, english is used).
// IMPORTANT:
// Be sure that you authorize remote administration in login-server
// (see login_athena.conf, 'admin_state' parameter)
//-------------------------------------------------------------------------
char loginserverip[16] = "127.0.0.1"; // IP of login-server
int loginserverport = 6900; // Port of login-server
char loginserveradminpassword[24] = "admin"; // Administration password
#ifdef PASSWORDENC
int passenc = 2; // Encoding type of the password
#else
int passenc = 0; // Encoding type of the password
#endif
char defaultlanguage = 'E'; // Default language (F: Fran�ais/E: English)
// (if it's not 'F', default is English)
char ladmin_log_filename[1024] = "log/ladmin.log";
char date_format[32] = "%Y-%m-%d %H:%M:%S";
//-------------------------------------------------------------------------
// LIST of COMMANDs that you can type at the prompt:
// To use these commands you can only type only the first letters.
// You must type a minimum of letters (you can not type 'a',
// because ladmin doesn't know if it's for 'aide' or for 'add')
// <Example> q <= quit, li <= list, pass <= passwd, etc.
//
// Note: every time you must give a account_name, you can use "" or '' (spaces can be included)
//
// aide/help/?
// Display the description of the commands
// aide/help/? [command]
// Display the description of the specified command
//
// add <account_name> <sex> <password>
// Create an account with the default email (a@a.com).
// Concerning the sex, only the first letter is used (F or M).
// The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.
// When the password is omitted, the input is done without displaying of the pressed keys.
// <example> add testname Male testpass
//
// ban/banish yyyy/mm/dd hh:mm:ss <account name>
// Changes the final date of a banishment of an account.
// Like banset, but <account name> is at end.
//
// banadd <account_name> <modifier>
// Adds or substracts time from the final date of a banishment of an account.
// Modifier is done as follows:
// Adjustment value (-1, 1, +1, etc...)
// Modified element:
// a or y: year
// m: month
// j or d: day
// h: hour
// mn: minute
// s: second
// <example> banadd testname +1m-2mn1s-6y
// this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
// NOTE: If you modify the final date of a non-banished account,
// you fix the final date to (actual time +- adjustments)
//
// banset <account_name> yyyy/mm/dd [hh:mm:ss]
// Changes the final date of a banishment of an account.
// Default time [hh:mm:ss]: 23:59:59.
// banset <account_name> 0
// Set a non-banished account (0 = unbanished).
//
// block <account name>
// Set state 5 (You have been blocked by the GM Team) to an account.
// Like state <account name> 5.
//
// check <account_name> <password>
// Check the validity of a password for an account
// NOTE: Server will never sends back a password.
// It's the only method you have to know if a password is correct.
// The other method is to have a ('physical') access to the accounts file.
//
// create <account_name> <sex> <email> <password>
// Like the 'add' command, but with e-mail moreover.
// <example> create testname Male my@mail.com testpass
//
// del <account name>
// Remove an account.
// This order requires confirmation. After confirmation, the account is deleted.
//
// email <account_name> <email>
// Modify the e-mail of an account.
//
// getcount
// Give the number of players online on all char-servers.
//
// gm <account_name> [GM_level]
// Modify the GM level of an account.
// Default value remove GM level (GM level = 0).
// <example> gm testname 80
//
// id <account name>
// Give the id of an account.
//
// info <account_id>
// Display complete information of an account.
//
// kami <message>
// Sends a broadcast message on all map-server (in yellow).
// kamib <message>
// Sends a broadcast message on all map-server (in blue).
//
// language <language>
// Change the language of displaying.
//
// list/ls [start_id [end_id]]
// Display a list of accounts.
// 'start_id', 'end_id': indicate end and start identifiers.
// Research by name is not possible with this command.
// <example> list 10 9999999
//
// listBan/lsBan [start_id [end_id]]
// Like list/ls, but only for accounts with state or banished
//
// listGM/lsGM [start_id [end_id]]
// Like list/ls, but only for GM accounts
//
// listOK/lsOK [start_id [end_id]]
// Like list/ls, but only for accounts without state and not banished
//
// memo <account_name> <memo>
// Modify the memo of an account.
// 'memo': it can have until 253 characters (with spaces or not).
//
// name <account_id>
// Give the name of an account.
//
// passwd <account_name> <new_password>
// Change the password of an account.
// When new password is omitted, the input is done without displaying of the pressed keys.
//
// quit/end/exit
// End of the program of administration
//
// reloadGM
// Reload GM configuration file
//
// search <expression>
// Seek accounts.
// Displays the accounts whose names correspond.
// search -r/-e/--expr/--regex <expression>
// Seek accounts by regular expression.
// Displays the accounts whose names correspond.
//
// sex <account_name> <sex>
// Modify the sex of an account.
// <example> sex testname Male
//
// state <account_name> <new_state> <error_message_#7>
// Change the state of an account.
// 'new_state': state is the state of the packet 0x006a + 1. The possibilities are:
// 0 = Account ok 6 = Your Game's EXE file is not the latest version
// 1 = Unregistered ID 7 = You are Prohibited to log in until %s
// 2 = Incorrect Password 8 = Server is jammed due to over populated
// 3 = This ID is expired 9 = No MSG
// 4 = Rejected from Server 100 = This ID has been totally erased
// 5 = You have been blocked by the GM Team
// all other values are 'No MSG', then use state 9 please.
// 'error_message_#7': message of the code error 6 = Your are Prohibited to log in until %s (packet 0x006a)
//
// timeadd <account_name> <modifier>
// Adds or substracts time from the validity limit of an account.
// Modifier is done as follows:
// Adjustment value (-1, 1, +1, etc...)
// Modified element:
// a or y: year
// m: month
// j or d: day
// h: hour
// mn: minute
// s: second
// <example> timeadd testname +1m-2mn1s-6y
// this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
// NOTE: You can not modify a unlimited validity limit.
// If you want modify it, you want probably create a limited validity limit.
// So, at first, you must set the validity limit to a date/time.
//
// timeset <account_name> yyyy/mm/dd [hh:mm:ss]
// Changes the validity limit of an account.
// Default time [hh:mm:ss]: 23:59:59.
// timeset <account_name> 0
// Gives an unlimited validity limit (0 = unlimited).
//
// unban/unbanish <account name>
// Unban an account.
// Like banset <account name> 0.
//
// unblock <account name>
// Set state 0 (Account ok) to an account.
// Like state <account name> 0.
//
// version
// Display the version of the login-server.
//
// who <account name>
// Displays complete information of an account.
//
//-------------------------------------------------------------------------
int login_fd;
int login_ip;
int bytes_to_read = 0; // flag to know if we waiting bytes from login-server
char command[1024];
char parameters[1024];
int list_first, list_last, list_type, list_count; // parameter to display a list of accounts
int already_exit_function = 0; // sometimes, the exit function is called twice... so, don't log twice the message
//------------------------------
// Writing function of logs file
//------------------------------
int ladmin_log(char *fmt, ...) {
FILE *logfp;
va_list ap;
struct timeval tv;
char tmpstr[2048];
va_start(ap, fmt);
logfp = fopen(ladmin_log_filename, "a");
if (logfp) {
if (fmt[0] == '\0') // jump a line if no message
fprintf(logfp, RETCODE);
else {
gettimeofday(&tv, NULL);
strftime(tmpstr, 24, date_format, localtime(&(tv.tv_sec)));
sprintf(tmpstr + strlen(tmpstr), ".%03d: %s", (int)tv.tv_usec / 1000, fmt);
vfprintf(logfp, tmpstr, ap);
}
fclose(logfp);
}
va_end(ap);
return 0;
}
//-----------------------------------------------------
// Function to suppress control characters in a string.
//-----------------------------------------------------
int remove_control_chars(unsigned char *str) {
int i;
int change = 0;
for(i = 0; str[i]; i++) {
if (str[i] < 32) {
str[i] = '_';
change = 1;
}
}
return change;
}
//---------------------------------------------
// Function to return ordonal text of a number.
//---------------------------------------------
char* makeordinal(int number) {
if (defaultlanguage == 'F') {
if (number == 0)
return "";
else if (number == 1)
return "er";
else
return "�me";
} else {
if ((number % 10) < 4 && (number % 10) != 0 && (number < 10 || number > 20)) {
if ((number % 10) == 1)
return "st";
else if ((number % 10) == 2)
return "nd";
else
return "rd";
} else {
return "th";
}
}
return "";
}
//-----------------------------------------------------------------------------------------
// Function to test of the validity of an account name (return 0 if incorrect, and 1 if ok)
//-----------------------------------------------------------------------------------------
int verify_accountname(char* account_name) {
int i;
for(i = 0; account_name[i]; i++) {
if (account_name[i] < 32) {
if (defaultlanguage == 'F') {
printf("Caract�re interdit trouv� dans le nom du compte (%d%s caract�re).\n", i+1, makeordinal(i+1));
ladmin_log("Caract�re interdit trouv� dans le nom du compte (%d%s caract�re)." RETCODE, i+1, makeordinal(i+1));
} else {
printf("Illegal character found in the account name (%d%s character).\n", i+1, makeordinal(i+1));
ladmin_log("Illegal character found in the account name (%d%s character)." RETCODE, i+1, makeordinal(i+1));
}
return 0;
}
}
if (strlen(account_name) < 4) {
if (defaultlanguage == 'F') {
printf("Nom du compte trop court. Entrez un nom de compte de 4-23 caract�res.\n");
ladmin_log("Nom du compte trop court. Entrez un nom de compte de 4-23 caract�res." RETCODE);
} else {
printf("Account name is too short. Please input an account name of 4-23 bytes.\n");
ladmin_log("Account name is too short. Please input an account name of 4-23 bytes." RETCODE);
}
return 0;
}
if (strlen(account_name) > 23) {
if (defaultlanguage == 'F') {
printf("Nom du compte trop long. Entrez un nom de compte de 4-23 caract�res.\n");
ladmin_log("Nom du compte trop long. Entrez un nom de compte de 4-23 caract�res." RETCODE);
} else {
printf("Account name is too long. Please input an account name of 4-23 bytes.\n");
ladmin_log("Account name is too long. Please input an account name of 4-23 bytes." RETCODE);
}
return 0;
}
return 1;
}
//---------------------------------------------------
// E-mail check: return 0 (not correct) or 1 (valid).
//---------------------------------------------------
int e_mail_check(unsigned char *email) {
char ch;
unsigned char* last_arobas;
// athena limits
if (strlen(email) < 3 || strlen(email) > 39)
return 0;
// part of RFC limits (official reference of e-mail description)
if (strchr(email, '@') == NULL || email[strlen(email)-1] == '@')
return 0;
if (email[strlen(email)-1] == '.')
return 0;
last_arobas = strrchr(email, '@');
if (strstr(last_arobas, "@.") != NULL ||
strstr(last_arobas, "..") != NULL)
return 0;
for(ch = 1; ch < 32; ch++) {
if (strchr(last_arobas, ch) != NULL) {
return 0;
break;
}
}
if (strchr(last_arobas, ' ') != NULL ||
strchr(last_arobas, ';') != NULL)
return 0;
// all correct
return 1;
}
//----------------------------------
// Sub-function: Input of a password
//----------------------------------
int typepasswd(char * password) {
char password1[1023], password2[1023];
int letter;
int i;
if (defaultlanguage == 'F') {
ladmin_log("Aucun mot de passe n'a �t� donn�. Demande d'un mot de passe." RETCODE);
} else {
ladmin_log("No password was given. Request to obtain a password." RETCODE);
}
memset(password1, '\0', sizeof(password1));
memset(password2, '\0', sizeof(password2));
if (defaultlanguage == 'F')
printf("\033[1;36m Entrez le mot de passe > \033[0;32;42m");
else
printf("\033[1;36m Type the password > \033[0;32;42m");
i = 0;
while ((letter = getchar()) != '\n')
password1[i++] = letter;
if (defaultlanguage == 'F')
printf("\033[0m\033[1;36m R�-entrez le mot de passe > \033[0;32;42m");
else
printf("\033[0m\033[1;36m Verify the password > \033[0;32;42m");
i = 0;
while ((letter = getchar()) != '\n')
password2[i++] = letter;
printf("\033[0m");
fflush(stdout);
fflush(stdin);
if (strcmp(password1, password2) != 0) {
if (defaultlanguage == 'F') {
printf("Erreur de v�rification du mot de passe: Saisissez le m�me mot de passe svp.\n");
ladmin_log("Erreur de v�rification du mot de passe: Saisissez le m�me mot de passe svp." RETCODE);
ladmin_log(" Premier mot de passe: %s, second mot de passe: %s." RETCODE, password1, password2);
} else {
printf("Password verification failed. Please input same password.\n");
ladmin_log("Password verification failed. Please input same password." RETCODE);
ladmin_log(" First password: %s, second password: %s." RETCODE, password1, password2);
}
return 0;
}
if (defaultlanguage == 'F') {
ladmin_log("Mot de passe saisi: %s." RETCODE, password1);
} else {
ladmin_log("Typed password: %s." RETCODE, password1);
}
strcpy(password, password1);
return 1;
}
//------------------------------------------------------------------------------------
// Sub-function: Test of the validity of password (return 0 if incorrect, and 1 if ok)
//------------------------------------------------------------------------------------
int verify_password(char * password) {
int i;
for(i = 0; password[i]; i++) {
if (password[i] < 32) {
if (defaultlanguage == 'F') {
printf("Caract�re interdit trouv� dans le mot de passe (%d%s caract�re).\n", i+1, makeordinal(i+1));
ladmin_log("Caract�re interdit trouv� dans le nom du compte (%d%s caract�re)." RETCODE, i+1, makeordinal(i+1));
} else {
printf("Illegal character found in the password (%d%s character).\n", i+1, makeordinal(i+1));
ladmin_log("Illegal character found in the password (%d%s character)." RETCODE, i+1, makeordinal(i+1));
}
return 0;
}
}
if (strlen(password) < 4) {
if (defaultlanguage == 'F') {
printf("Nom du compte trop court. Entrez un nom de compte de 4-23 caract�res.\n");
ladmin_log("Nom du compte trop court. Entrez un nom de compte de 4-23 caract�res." RETCODE);
} else {
printf("Account name is too short. Please input an account name of 4-23 bytes.\n");
ladmin_log("Account name is too short. Please input an account name of 4-23 bytes." RETCODE);
}
return 0;
}
if (strlen(password) > 23) {
if (defaultlanguage == 'F') {
printf("Mot de passe trop long. Entrez un mot de passe de 4-23 caract�res.\n");
ladmin_log("Mot de passe trop long. Entrez un mot de passe de 4-23 caract�res." RETCODE);
} else {
printf("Password is too long. Please input a password of 4-23 bytes.\n");
ladmin_log("Password is too long. Please input a password of 4-23 bytes." RETCODE);
}
return 0;
}
return 1;
}
//------------------------------------------------------------------
// Sub-function: Check the name of a command (return complete name)
//-----------------------------------------------------------------
int check_command(char * command) {
// help
if (strncmp(command, "aide", 2) == 0 && strncmp(command, "aide", strlen(command)) == 0) // not 1 letter command: 'aide' or 'add'?
strcpy(command, "aide");
else if (strncmp(command, "help", 1) == 0 && strncmp(command, "help", strlen(command)) == 0)
strcpy(command, "help");
// general commands
else if (strncmp(command, "add", 2) == 0 && strncmp(command, "add", strlen(command)) == 0) // not 1 letter command: 'aide' or 'add'?
strcpy(command, "add");
else if ((strncmp(command, "ban", 3) == 0 && strncmp(command, "ban", strlen(command)) == 0) ||
(strncmp(command, "banish", 4) == 0 && strncmp(command, "banish", strlen(command)) == 0))
strcpy(command, "ban");
else if ((strncmp(command, "banadd", 4) == 0 && strncmp(command, "banadd", strlen(command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ?
strcmp(command, "ba") == 0)
strcpy(command, "banadd");
else if ((strncmp(command, "banset", 4) == 0 && strncmp(command, "banset", strlen(command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ?
strcmp(command, "bs") == 0)
strcpy(command, "banset");
else if (strncmp(command, "block", 2) == 0 && strncmp(command, "block", strlen(command)) == 0)
strcpy(command, "block");
else if (strncmp(command, "check", 2) == 0 && strncmp(command, "check", strlen(command)) == 0) // not 1 letter command: 'check' or 'create'?
strcpy(command, "check");
else if (strncmp(command, "create", 2) == 0 && strncmp(command, "create", strlen(command)) == 0) // not 1 letter command: 'check' or 'create'?
strcpy(command, "create");
else if (strncmp(command, "delete", 1) == 0 && strncmp(command, "delete", strlen(command)) == 0)
strcpy(command, "delete");
else if ((strncmp(command, "email", 2) == 0 && strncmp(command, "email", strlen(command)) == 0) || // not 1 letter command: 'email', 'end' or 'exit'?
(strncmp(command, "e-mail", 2) == 0 && strncmp(command, "e-mail", strlen(command)) == 0))
strcpy(command, "email");
else if (strncmp(command, "getcount", 2) == 0 && strncmp(command, "getcount", strlen(command)) == 0) // not 1 letter command: 'getcount' or 'gm'?
strcpy(command, "getcount");
// else if (strncmp(command, "gm", 2) == 0 && strncmp(command, "gm", strlen(command)) == 0) // not 1 letter command: 'getcount' or 'gm'?
// strcpy(command, "gm");
// else if (strncmp(command, "id", 2) == 0 && strncmp(command, "id", strlen(command)) == 0) // not 1 letter command: 'id' or 'info'?
// strcpy(command, "id");
else if (strncmp(command, "info", 2) == 0 && strncmp(command, "info", strlen(command)) == 0) // not 1 letter command: 'id' or 'info'?
strcpy(command, "info");
// else if (strncmp(command, "kami", 4) == 0 && strncmp(command, "kami", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'?
// strcpy(command, "kami");
// else if (strncmp(command, "kamib", 5) == 0 && strncmp(command, "kamib", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'?
// strcpy(command, "kamib");
else if ((strncmp(command, "language", 2) == 0 && strncmp(command, "language", strlen(command)) == 0)) // not 1 letter command: 'language' or 'list'?
strcpy(command, "language");
else if ((strncmp(command, "list", 2) == 0 && strncmp(command, "list", strlen(command)) == 0) || // 'list' is default list command // not 1 letter command: 'language' or 'list'?
strcmp(command, "ls") == 0)
strcpy(command, "list");
else if ((strncmp(command, "listban", 5) == 0 && strncmp(command, "listban", strlen(command)) == 0) ||
(strncmp(command, "lsban", 3) == 0 && strncmp(command, "lsban", strlen(command)) == 0) ||
strcmp(command, "lb") == 0)
strcpy(command, "listban");
else if ((strncmp(command, "listgm", 5) == 0 && strncmp(command, "listgm", strlen(command)) == 0) ||
(strncmp(command, "lsgm", 3) == 0 && strncmp(command, "lsgm", strlen(command)) == 0) ||
strcmp(command, "lg") == 0)
strcpy(command, "listgm");
else if ((strncmp(command, "listok", 5) == 0 && strncmp(command, "listok", strlen(command)) == 0) ||
(strncmp(command, "lsok", 3) == 0 && strncmp(command, "lsok", strlen(command)) == 0) ||
strcmp(command, "lo") == 0)
strcpy(command, "listok");
else if (strncmp(command, "memo", 1) == 0 && strncmp(command, "memo", strlen(command)) == 0)
strcpy(command, "memo");
else if (strncmp(command, "name", 1) == 0 && strncmp(command, "name", strlen(command)) == 0)
strcpy(command, "name");
else if ((strncmp(command, "password", 1) == 0 && strncmp(command, "password", strlen(command)) == 0) ||
strcmp(command, "passwd") == 0)
strcpy(command, "password");
else if (strncmp(command, "reloadgm", 1) == 0 && strncmp(command, "reloadgm", strlen(command)) == 0)
strcpy(command, "reloadgm");
else if (strncmp(command, "search", 3) == 0 && strncmp(command, "search", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'?
strcpy(command, "search"); // not 2 letters command: 'search' or 'sex'?
// else if (strncmp(command, "sex", 3) == 0 && strncmp(command, "sex", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'?
// strcpy(command, "sex"); // not 2 letters command: 'search' or 'sex'?
else if (strncmp(command, "state", 2) == 0 && strncmp(command, "state", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'?
strcpy(command, "state");
else if ((strncmp(command, "timeadd", 5) == 0 && strncmp(command, "timeadd", strlen(command)) == 0) || // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'?
strcmp(command, "ta") == 0)
strcpy(command, "timeadd");
else if ((strncmp(command, "timeset", 5) == 0 && strncmp(command, "timeset", strlen(command)) == 0) || // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'?
strcmp(command, "ts") == 0)
strcpy(command, "timeset");
else if ((strncmp(command, "unban", 5) == 0 && strncmp(command, "unban", strlen(command)) == 0) ||
(strncmp(command, "unbanish", 4) == 0 && strncmp(command, "unbanish", strlen(command)) == 0))
strcpy(command, "unban");
else if (strncmp(command, "unblock", 4) == 0 && strncmp(command, "unblock", strlen(command)) == 0)
strcpy(command, "unblock");
else if (strncmp(command, "version", 1) == 0 && strncmp(command, "version", strlen(command)) == 0)
strcpy(command, "version");
else if (strncmp(command, "who", 1) == 0 && strncmp(command, "who", strlen(command)) == 0)
strcpy(command, "who");
// quit
else if (strncmp(command, "quit", 1) == 0 && strncmp(command, "quit", strlen(command)) == 0)
strcpy(command, "quit");
else if (strncmp(command, "exit", 2) == 0 && strncmp(command, "exit", strlen(command)) == 0) // not 1 letter command: 'email', 'end' or 'exit'?
strcpy(command, "exit");
else if (strncmp(command, "end", 2) == 0 && strncmp(command, "end", strlen(command)) == 0) // not 1 letter command: 'email', 'end' or 'exit'?
strcpy(command, "end");
return 0;
}
//-----------------------------------------
// Sub-function: Display commands of ladmin
//-----------------------------------------
void display_help(char* param, int language) {
char command[1023];
int i;
memset(command, '\0', sizeof(command));
if (sscanf(param, "%s ", command) < 1 || strlen(command) == 0)
strcpy(command, ""); // any value that is not a command
if (command[0] == '?') {
if (defaultlanguage == 'F')
strcpy(command, "aide");
else
strcpy(command, "help");
}
// lowercase for command
for (i = 0; command[i]; i++)
command[i] = tolower(command[i]);
// Analyse of the command
check_command(command); // give complete name to the command
if (defaultlanguage == 'F') {
ladmin_log("Affichage des commandes ou d'une commande." RETCODE);
} else {
ladmin_log("Displaying of the commands or a command." RETCODE);
}
if (language == 1) {
if (strcmp(command, "aide") == 0) {
printf("aide/help/?\n");
printf(" Affiche la description des commandes\n");
printf("aide/help/? [commande]\n");
printf(" Affiche la description de la commande specifi�e\n");
} else if (strcmp(command, "help") == 0 ) {
printf("aide/help/?\n");
printf(" Display the description of the commands\n");
printf("aide/help/? [command]\n");
printf(" Display the description of the specified command\n");
// general commands
} else if (strcmp(command, "add") == 0) {
printf("add <nomcompte> <sexe> <motdepasse>\n");
printf(" Cr�e un compte avec l'email par d�faut (a@a.com).\n");
printf(" Concernant le sexe, seule la premi�re lettre compte (F ou M).\n");
printf(" L'e-mail est a@a.com (e-mail par d�faut). C'est comme n'avoir aucun e-mail.\n");
printf(" Lorsque motdepasse est omis, la saisie se fait sans que la frappe se voit.\n");
printf(" <exemple> add testname Male testpass\n");
} else if (strcmp(command, "ban") == 0) {
printf("ban/banish aaaa/mm/jj hh:mm:ss <nom compte>\n");
printf(" Change la date de fin de bannissement d'un compte.\n");
printf(" Comme banset, mais <nom compte> est � la fin.\n");
} else if (strcmp(command, "banadd") == 0) {
printf("banadd <nomcompte> <Modificateur>\n");
printf(" Ajoute ou soustrait du temps � la date de banissement d'un compte.\n");
printf(" Les modificateurs sont construits comme suit:\n");
printf(" Valeur d'ajustement (-1, 1, +1, etc...)\n");
printf(" El�ment modifi�:\n");
printf(" a ou y: ann�e\n");
printf(" m: mois\n");
printf(" j ou d: jour\n");
printf(" h: heure\n");
printf(" mn: minute\n");
printf(" s: seconde\n");
printf(" <exemple> banadd testname +1m-2mn1s-6a\n");
printf(" Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n");
printf(" et 6 ans dans le m�me temps.\n");
printf("NOTE: Si vous modifez la date de banissement d'un compte non bani,\n");
printf(" vous indiquez comme date (le moment actuel +- les ajustements)\n");
} else if (strcmp(command, "banset") == 0) {
printf("banset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n");
printf(" Change la date de fin de bannissement d'un compte.\n");
printf(" Heure par d�faut [hh:mm:ss]: 23:59:59.\n");
printf("banset <nomcompte> 0\n");
printf(" D�banni un compte (0 = de-banni).\n");
} else if (strcmp(command, "block") == 0) {
printf("block <nom compte>\n");
printf(" Place le status d'un compte � 5 (You have been blocked by the GM Team).\n");
printf(" La commande est l'�quivalent de state <nom_compte> 5.\n");
} else if (strcmp(command, "check") == 0) {
printf("check <nomcompte> <motdepasse>\n");
printf(" V�rifie la validit� d'un mot de passe pour un compte\n");
printf(" NOTE: Le serveur n'enverra jamais un mot de passe.\n");
printf(" C'est la seule m�thode que vous poss�dez pour savoir\n");
printf(" si un mot de passe est le bon. L'autre m�thode est\n");
printf(" d'avoir un acc�s ('physique') au fichier des comptes.\n");
} else if (strcmp(command, "create") == 0) {
printf("create <nomcompte> <sexe> <email> <motdepasse>\n");
printf(" Comme la commande add, mais avec l'e-mail en plus.\n");
printf(" <exemple> create testname Male mon@mail.com testpass\n");
} else if (strcmp(command, "delete") == 0) {
printf("del <nom compte>\n");
printf(" Supprime un compte.\n");
printf(" La commande demande confirmation. Apr�s confirmation, le compte est d�truit.\n");
} else if (strcmp(command, "email") == 0) {
printf("email <nomcompte> <email>\n");
printf(" Modifie l'e-mail d'un compte.\n");
} else if (strcmp(command, "getcount") == 0) {
printf("getcount\n");
printf(" Donne le nombre de joueurs en ligne par serveur de char.\n");
} else if (strcmp(command, "gm") == 0) {
printf("gm <nomcompte> [Niveau_GM]\n");
printf(" Modifie le niveau de GM d'un compte.\n");
printf(" Valeur par d�faut: 0 (suppression du niveau de GM).\n");
printf(" <exemple> gm nomtest 80\n");
} else if (strcmp(command, "id") == 0) {
printf("id <nom compte>\n");
printf(" Donne l'id d'un compte.\n");
} else if (strcmp(command, "info") == 0) {
printf("info <idcompte>\n");
printf(" Affiche les informations sur un compte.\n");
} else if (strcmp(command, "kami") == 0) {
printf("kami <message>\n");
printf(" Envoi un message g�n�ral sur tous les serveurs de map (en jaune).\n");
} else if (strcmp(command, "kamib") == 0) {
printf("kamib <message>\n");
printf(" Envoi un message g�n�ral sur tous les serveurs de map (en bleu).\n");
} else if (strcmp(command, "language") == 0) {
printf("language <langue>\n");
printf(" Change la langue d'affichage.\n");
printf(" Langues possibles: 'Fran�ais' ou 'English'.\n");
} else if (strcmp(command, "list") == 0) {
printf("list/ls [Premier_id [Dernier_id]]\n");
printf(" Affiche une liste de comptes.\n");
printf(" 'Premier_id', 'Dernier_id': indique les identifiants de d�part et de fin.\n");
printf(" La recherche par nom n'est pas possible avec cette commande.\n");
printf(" <example> list 10 9999999\n");
} else if (strcmp(command, "listban") == 0) {
printf("listBan/lsBan [Premier_id [Dernier_id]]\n");
printf(" Comme list/ls, mais seulement pour les comptes avec statut ou bannis.\n");
} else if (strcmp(command, "listgm") == 0) {
printf("listGM/lsGM [Premier_id [Dernier_id]]\n");
printf(" Comme list/ls, mais seulement pour les comptes GM.\n");
} else if (strcmp(command, "listok") == 0) {
printf("listOK/lsOK [Premier_id [Dernier_id]]\n");
printf(" Comme list/ls, mais seulement pour les comptes sans statut et non bannis.\n");
} else if (strcmp(command, "memo") == 0) {
printf("memo <nomcompte> <memo>\n");
printf(" Modifie le m�mo d'un compte.\n");
printf(" 'memo': Il peut avoir jusqu'� 253 caract�res (avec des espaces ou non).\n");
} else if (strcmp(command, "name") == 0) {
printf("name <idcompte>\n");
printf(" Donne le nom d'un compte.\n");
} else if (strcmp(command, "password") == 0) {
printf("passwd <nomcompte> <nouveaumotdepasse>\n");
printf(" Change le mot de passe d'un compte.\n");
printf(" Lorsque nouveaumotdepasse est omis,\n");
printf(" la saisie se fait sans que la frappe ne se voit.\n");
} else if (strcmp(command, "reloadgm") == 0) {
printf("reloadGM\n");
printf(" Reload GM configuration file\n");
} else if (strcmp(command, "search") == 0) {
printf("search <expression>\n");
printf(" Cherche des comptes.\n");
printf(" Affiche les comptes dont les noms correspondent.\n");
// printf("search -r/-e/--expr/--regex <expression>\n");
// printf(" Cherche des comptes par expression reguli�re.\n");
// printf(" Affiche les comptes dont les noms correspondent.\n");
} else if (strcmp(command, "sex") == 0) {
printf("sex <nomcompte> <sexe>\n");
printf(" Modifie le sexe d'un compte.\n");
printf(" <exemple> sex testname Male\n");
} else if (strcmp(command, "state") == 0) {
printf("state <nomcompte> <nouveaustatut> <message_erreur_7>\n");
printf(" Change le statut d'un compte.\n");
printf(" 'nouveaustatut': Le statut est le m�me que celui du packet 0x006a + 1.\n");
printf(" les possibilit�s sont:\n");
printf(" 0 = Compte ok\n");
printf(" 1 = Unregistered ID\n");
printf(" 2 = Incorrect Password\n");
printf(" 3 = This ID is expired\n");
printf(" 4 = Rejected from Server\n");
printf(" 5 = You have been blocked by the GM Team\n");
printf(" 6 = Your Game's EXE file is not the latest version\n");
printf(" 7 = You are Prohibited to log in until...\n");
printf(" 8 = Server is jammed due to over populated\n");
printf(" 9 = No MSG\n");
printf(" 100 = This ID has been totally erased\n");
printf(" all other values are 'No MSG', then use state 9 please.\n");
printf(" 'message_erreur_7': message du code erreur 6 =\n");
printf(" = Your are Prohibited to log in until... (packet 0x006a)\n");
} else if (strcmp(command, "timeadd") == 0) {
printf("timeadd <nomcompte> <modificateur>\n");
printf(" Ajoute/soustrait du temps � la limite de validit� d'un compte.\n");
printf(" Le modificateur est compos� comme suit:\n");
printf(" Valeur modificatrice (-1, 1, +1, etc...)\n");
printf(" El�ment modifi�:\n");
printf(" a ou y: ann�e\n");
printf(" m: mois\n");
printf(" j ou d: jour\n");
printf(" h: heure\n");
printf(" mn: minute\n");
printf(" s: seconde\n");
printf(" <exemple> timeadd testname +1m-2mn1s-6a\n");
printf(" Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n");
printf(" et 6 ans dans le m�me temps.\n");
printf("NOTE: Vous ne pouvez pas modifier une limite de validit� illimit�e. Si vous\n");
printf(" d�sirez le faire, c'est que vous voulez probablement cr�er un limite de\n");
printf(" validit� limit�e. Donc, en premier, fix� une limite de valitid�.\n");
} else if (strcmp(command, "timeadd") == 0) {
printf("timeset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n");
printf(" Change la limite de validit� d'un compte.\n");
printf(" Heure par d�faut [hh:mm:ss]: 23:59:59.\n");
printf("timeset <nomcompte> 0\n");
printf(" Donne une limite de validit� illimit�e (0 = illimit�e).\n");
} else if (strcmp(command, "unban") == 0) {
printf("unban/unbanish <nom compte>\n");
printf(" Ote le banissement d'un compte.\n");
printf(" La commande est l'�quivalent de banset <nom_compte> 0.\n");
} else if (strcmp(command, "unblock") == 0) {
printf("unblock <nom compte>\n");
printf(" Place le status d'un compte � 0 (Compte ok).\n");
printf(" La commande est l'�quivalent de state <nom_compte> 0.\n");
} else if (strcmp(command, "version") == 0) {
printf("version\n");
printf(" Affiche la version du login-serveur.\n");
} else if (strcmp(command, "who") == 0) {
printf("who <nom compte>\n");
printf(" Affiche les informations sur un compte.\n");
// quit
} else if (strcmp(command, "quit") == 0 ||
strcmp(command, "exit") == 0 ||
strcmp(command, "end") == 0) {
printf("quit/end/exit\n");
printf(" Fin du programme d'administration.\n");
// unknown command
} else {
if (strlen(command) > 0)
printf("Commande inconnue [%s] pour l'aide. Affichage de toutes les commandes.\n", command);
printf(" aide/help/? -- Affiche cet aide\n");
printf(" aide/help/? [commande] -- Affiche l'aide de la commande\n");
printf(" add <nomcompte> <sexe> <motdepasse> -- Cr�e un compte (sans email)\n");
printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom compte> -- Fixe la date finale de banismnt\n");
printf(" banadd/ba <nomcompte> <modificateur> -- Ajout/soustrait du temps � la\n");
printf(" exemple: ba moncompte +1m-2mn1s-2y date finale de banissement\n");
printf(" banset/bs <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la date fin de banisemnt\n");
printf(" banset/bs <nomcompte> 0 -- D�-banis un compte.\n");
printf(" block <nom compte> -- Mets le status d'un compte � 5 (blocked by the GM Team)\n");
printf(" check <nomcompte> <motdepasse> -- V�rifie un mot de passe d'un compte\n");
printf(" create <nomcompte> <sexe> <email> <motdepasse> -- Cr�e un compte (avec email)\n");
printf(" del <nom compte> -- Supprime un compte\n");
printf(" email <nomcompte> <email> -- Modifie l'e-mail d'un compte\n");
printf(" getcount -- Donne le nb de joueurs en ligne\n");
printf(" gm <nomcompte> [Niveau_GM] -- Modifie le niveau de GM d'un compte\n");
printf(" id <nom compte> -- Donne l'id d'un compte\n");
printf(" info <idcompte> -- Affiche les infos sur un compte\n");
printf(" kami <message> -- Envoi un message g�n�ral (en jaune)\n");
printf(" kamib <message> -- Envoi un message g�n�ral (en bleu)\n");
printf(" language <langue> -- Change la langue d'affichage.\n");
printf(" list/ls [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n");
printf(" listBan/lsBan [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n");
printf(" avec un statut ou bannis\n");
printf(" listGM/lsGM [Premier_id [Dernier_id] ] -- Affiche une liste de comptes GM\n");
printf(" listOK/lsOK [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n");
printf(" sans status et non bannis\n");
printf(" memo <nomcompte> <memo> -- Modifie le memo d'un compte\n");
printf(" name <idcompte> -- Donne le nom d'un compte\n");
printf(" passwd <nomcompte> <nouveaumotdepasse> -- Change le mot de passe d'un compte\n");
printf(" quit/end/exit -- Fin du programme d'administation\n");
printf(" reloadGM -- Recharger le fichier de config des GM\n");
printf(" search <expression> -- Cherche des comptes\n");
// printf(" search -e/-r/--expr/--regex <expression> -- Cherche des comptes par REGEX\n");
printf(" sex <nomcompte> <sexe> -- Modifie le sexe d'un compte\n");
printf(" state <nomcompte> <nouveaustatut> <messageerr7> -- Change le statut d'1 compte\n");
printf(" timeadd/ta <nomcompte> <modificateur> -- Ajout/soustrait du temps � la\n");
printf(" exemple: ta moncompte +1m-2mn1s-2y limite de validit�\n");
printf(" timeset/ts <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la limite de validit�\n");
printf(" timeset/ts <nomcompte> 0 -- limite de validit� = illimit�e\n");
printf(" unban/unbanish <nom compte> -- Ote le banissement d'un compte\n");
printf(" unblock <nom compte> -- Mets le status d'un compte � 0 (Compte ok)\n");
printf(" version -- Donne la version du login-serveur\n");
printf(" who <nom compte> -- Affiche les infos sur un compte\n");
printf(" Note: Pour les noms de compte avec des espaces, tapez \"<nom compte>\" (ou ').\n");
}
} else {
if (strcmp(command, "aide") == 0) {
printf("aide/help/?\n");
printf(" Display the description of the commands\n");
printf("aide/help/? [command]\n");
printf(" Display the description of the specified command\n");
} else if (strcmp(command, "help") == 0 ) {
printf("aide/help/?\n");
printf(" Display the description of the commands\n");
printf("aide/help/? [command]\n");
printf(" Display the description of the specified command\n");
// general commands
} else if (strcmp(command, "add") == 0) {
printf("add <account_name> <sex> <password>\n");
printf(" Create an account with the default email (a@a.com).\n");
printf(" Concerning the sex, only the first letter is used (F or M).\n");
printf(" The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.\n");
printf(" When the password is omitted,\n");
printf(" the input is done without displaying of the pressed keys.\n");
printf(" <example> add testname Male testpass\n");
} else if (strcmp(command, "ban") == 0) {
printf("ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
printf(" Changes the final date of a banishment of an account.\n");
printf(" Like banset, but <account name> is at end.\n");
} else if (strcmp(command, "banadd") == 0) {
printf("banadd <account_name> <modifier>\n");
printf(" Adds or substracts time from the final date of a banishment of an account.\n");
printf(" Modifier is done as follows:\n");
printf(" Adjustment value (-1, 1, +1, etc...)\n");
printf(" Modified element:\n");
printf(" a or y: year\n");
printf(" m: month\n");
printf(" j or d: day\n");
printf(" h: hour\n");
printf(" mn: minute\n");
printf(" s: second\n");
printf(" <example> banadd testname +1m-2mn1s-6y\n");
printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n");
printf(" and 6 years at the same time.\n");
printf("NOTE: If you modify the final date of a non-banished account,\n");
printf(" you fix the final date to (actual time +- adjustments)\n");
} else if (strcmp(command, "banset") == 0) {
printf("banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
printf(" Changes the final date of a banishment of an account.\n");
printf(" Default time [hh:mm:ss]: 23:59:59.\n");
printf("banset <account_name> 0\n");
printf(" Set a non-banished account (0 = unbanished).\n");
} else if (strcmp(command, "block") == 0) {
printf("block <account name>\n");
printf(" Set state 5 (You have been blocked by the GM Team) to an account.\n");
printf(" This command works like state <account_name> 5.\n");
} else if (strcmp(command, "check") == 0) {
printf("check <account_name> <password>\n");
printf(" Check the validity of a password for an account.\n");
printf(" NOTE: Server will never sends back a password.\n");
printf(" It's the only method you have to know if a password is correct.\n");
printf(" The other method is to have a ('physical') access to the accounts file.\n");
} else if (strcmp(command, "create") == 0) {
printf("create <account_name> <sex> <email> <password>\n");
printf(" Like the 'add' command, but with e-mail moreover.\n");
printf(" <example> create testname Male my@mail.com testpass\n");
} else if (strcmp(command, "delete") == 0) {
printf("del <account name>\n");
printf(" Remove an account.\n");
printf(" This order requires confirmation. After confirmation, the account is deleted.\n");
} else if (strcmp(command, "email") == 0) {
printf("email <account_name> <email>\n");
printf(" Modify the e-mail of an account.\n");
} else if (strcmp(command, "getcount") == 0) {
printf("getcount\n");
printf(" Give the number of players online on all char-servers.\n");
} else if (strcmp(command, "gm") == 0) {
printf("gm <account_name> [GM_level]\n");
printf(" Modify the GM level of an account.\n");
printf(" Default value remove GM level (GM level = 0).\n");
printf(" <example> gm testname 80\n");
} else if (strcmp(command, "id") == 0) {
printf("id <account name>\n");
printf(" Give the id of an account.\n");
} else if (strcmp(command, "info") == 0) {
printf("info <account_id>\n");
printf(" Display complete information of an account.\n");
} else if (strcmp(command, "kami") == 0) {
printf("kami <message>\n");
printf(" Sends a broadcast message on all map-server (in yellow).\n");
} else if (strcmp(command, "kamib") == 0) {
printf("kamib <message>\n");
printf(" Sends a broadcast message on all map-server (in blue).\n");
} else if (strcmp(command, "language") == 0) {
printf("language <language>\n");
printf(" Change the language of displaying.\n");
printf(" Possible languages: Fran�ais or English.\n");
} else if (strcmp(command, "list") == 0) {
printf("list/ls [start_id [end_id]]\n");
printf(" Display a list of accounts.\n");
printf(" 'start_id', 'end_id': indicate end and start identifiers.\n");
printf(" Research by name is not possible with this command.\n");
printf(" <example> list 10 9999999\n");
} else if (strcmp(command, "listban") == 0) {
printf("listBan/lsBan [start_id [end_id]]\n");
printf(" Like list/ls, but only for accounts with state or banished.\n");
} else if (strcmp(command, "listgm") == 0) {
printf("listGM/lsGM [start_id [end_id]]\n");
printf(" Like list/ls, but only for GM accounts.\n");
} else if (strcmp(command, "listok") == 0) {
printf("listOK/lsOK [start_id [end_id]]\n");
printf(" Like list/ls, but only for accounts without state and not banished.\n");
} else if (strcmp(command, "memo") == 0) {
printf("memo <account_name> <memo>\n");
printf(" Modify the memo of an account.\n");
printf(" 'memo': it can have until 253 characters (with spaces or not).\n");
} else if (strcmp(command, "name") == 0) {
printf("name <account_id>\n");
printf(" Give the name of an account.\n");
} else if (strcmp(command, "password") == 0) {
printf("passwd <account_name> <new_password>\n");
printf(" Change the password of an account.\n");
printf(" When new password is omitted,\n");
printf(" the input is done without displaying of the pressed keys.\n");
} else if (strcmp(command, "reloadgm") == 0) {
printf("reloadGM\n");
printf(" Reload GM configuration file\n");
} else if (strcmp(command, "search") == 0) {
printf("search <expression>\n");
printf(" Seek accounts.\n");
printf(" Displays the accounts whose names correspond.\n");
// printf("search -r/-e/--expr/--regex <expression>\n");
// printf(" Seek accounts by regular expression.\n");
// printf(" Displays the accounts whose names correspond.\n");
} else if (strcmp(command, "sex") == 0) {
printf("sex <account_name> <sex>\n");
printf(" Modify the sex of an account.\n");
printf(" <example> sex testname Male\n");
} else if (strcmp(command, "state") == 0) {
printf("state <account_name> <new_state> <error_message_#7>\n");
printf(" Change the state of an account.\n");
printf(" 'new_state': state is the state of the packet 0x006a + 1.\n");
printf(" The possibilities are:\n");
printf(" 0 = Account ok\n");
printf(" 1 = Unregistered ID\n");
printf(" 2 = Incorrect Password\n");
printf(" 3 = This ID is expired\n");
printf(" 4 = Rejected from Server\n");
printf(" 5 = You have been blocked by the GM Team\n");
printf(" 6 = Your Game's EXE file is not the latest version\n");
printf(" 7 = You are Prohibited to log in until...\n");
printf(" 8 = Server is jammed due to over populated\n");
printf(" 9 = No MSG\n");
printf(" 100 = This ID has been totally erased\n");
printf(" all other values are 'No MSG', then use state 9 please.\n");
printf(" 'error_message_#7': message of the code error 6\n");
printf(" = Your are Prohibited to log in until... (packet 0x006a)\n");
} else if (strcmp(command, "timeadd") == 0) {
printf("timeadd <account_name> <modifier>\n");
printf(" Adds or substracts time from the validity limit of an account.\n");
printf(" Modifier is done as follows:\n");
printf(" Adjustment value (-1, 1, +1, etc...)\n");
printf(" Modified element:\n");
printf(" a or y: year\n");
printf(" m: month\n");
printf(" j or d: day\n");
printf(" h: hour\n");
printf(" mn: minute\n");
printf(" s: second\n");
printf(" <example> timeadd testname +1m-2mn1s-6y\n");
printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n");
printf(" and 6 years at the same time.\n");
printf("NOTE: You can not modify a unlimited validity limit.\n");
printf(" If you want modify it, you want probably create a limited validity limit.\n");
printf(" So, at first, you must set the validity limit to a date/time.\n");
} else if (strcmp(command, "timeadd") == 0) {
printf("timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
printf(" Changes the validity limit of an account.\n");
printf(" Default time [hh:mm:ss]: 23:59:59.\n");
printf("timeset <account_name> 0\n");
printf(" Gives an unlimited validity limit (0 = unlimited).\n");
} else if (strcmp(command, "unban") == 0) {
printf("unban/unbanish <account name>\n");
printf(" Remove the banishment of an account.\n");
printf(" This command works like banset <account_name> 0.\n");
} else if (strcmp(command, "unblock") == 0) {
printf("unblock <account name>\n");
printf(" Set state 0 (Account ok) to an account.\n");
printf(" This command works like state <account_name> 0.\n");
} else if (strcmp(command, "version") == 0) {
printf("version\n");
printf(" Display the version of the login-server.\n");
} else if (strcmp(command, "who") == 0) {
printf("who <account name>\n");
printf(" Displays complete information of an account.\n");
// quit
} else if (strcmp(command, "quit") == 0 ||
strcmp(command, "exit") == 0 ||
strcmp(command, "end") == 0) {
printf("quit/end/exit\n");
printf(" End of the program of administration.\n");
// unknown command
} else {
if (strlen(command) > 0)
printf("Unknown command [%s] for help. Displaying of all commands.\n", command);
printf(" aide/help/? -- Display this help\n");
printf(" aide/help/? [command] -- Display the help of the command\n");
printf(" add <account_name> <sex> <password> -- Create an account with default email\n");
printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name> -- Change final date of a ban\n");
printf(" banadd/ba <account_name> <modifier> -- Add or substract time from the final\n");
printf(" example: ba apple +1m-2mn1s-2y date of a banishment of an account\n");
printf(" banset/bs <account_name> yyyy/mm/dd [hh:mm:ss] -- Change final date of a ban\n");
printf(" banset/bs <account_name> 0 -- Un-banish an account\n");
printf(" block <account name> -- Set state 5 (blocked by the GM Team) to an account\n");
printf(" check <account_name> <password> -- Check the validity of a password\n");
printf(" create <account_name> <sex> <email> <passwrd> -- Create an account with email\n");
printf(" del <account name> -- Remove an account\n");
printf(" email <account_name> <email> -- Modify an email of an account\n");
printf(" getcount -- Give the number of players online\n");
printf(" gm <account_name> [GM_level] -- Modify the GM level of an account\n");
printf(" id <account name> -- Give the id of an account\n");
printf(" info <account_id> -- Display all information of an account\n");
printf(" kami <message> -- Sends a broadcast message (in yellow)\n");
printf(" kamib <message> -- Sends a broadcast message (in blue)\n");
printf(" language <language> -- Change the language of displaying.\n");
printf(" list/ls [First_id [Last_id]] -- Display a list of accounts\n");
printf(" listBan/lsBan [First_id [Last_id] ] -- Display a list of accounts\n");
printf(" with state or banished\n");
printf(" listGM/lsGM [First_id [Last_id]] -- Display a list of GM accounts\n");
printf(" listOK/lsOK [First_id [Last_id] ] -- Display a list of accounts\n");
printf(" without state and not banished\n");
printf(" memo <account_name> <memo> -- Modify the memo of an account\n");
printf(" name <account_id> -- Give the name of an account\n");
printf(" passwd <account_name> <new_password> -- Change the password of an account\n");
printf(" quit/end/exit -- End of the program of administation\n");
printf(" reloadGM -- Reload GM configuration file\n");
printf(" search <expression> -- Seek accounts\n");
// printf(" search -e/-r/--expr/--regex <expressn> -- Seek accounts by regular-expression\n");
printf(" sex <nomcompte> <sexe> -- Modify the sex of an account\n");
printf(" state <account_name> <new_state> <error_message_#7> -- Change the state\n");
printf(" timeadd/ta <account_name> <modifier> -- Add or substract time from the\n");
printf(" example: ta apple +1m-2mn1s-2y validity limit of an account\n");
printf(" timeset/ts <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit\n");
printf(" timeset/ts <account_name> 0 -- Give a unlimited validity limit\n");
printf(" unban/unbanish <account name> -- Remove the banishment of an account\n");
printf(" unblock <account name> -- Set state 0 (Account ok) to an account\n");
printf(" version -- Gives the version of the login-server\n");
printf(" who <account name> -- Display all information of an account\n");
printf(" who <account name> -- Display all information of an account\n");
printf(" Note: To use spaces in an account name, type \"<account name>\" (or ').\n");
}
}
}
//-----------------------------
// Sub-function: add an account
//-----------------------------
int addaccount(char* param, int emailflag) {
char name[1023], sex[1023], email[1023], password[1023];
// int i;
memset(name, '\0', sizeof(name));
memset(sex, '\0', sizeof(sex));
memset(email, '\0', sizeof(email));
memset(password, '\0', sizeof(password));
if (emailflag == 0) { // add command
if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, sex, password) < 2 && // password can be void
sscanf(param, "'%[^']' %s %[^\r\n]", name, sex, password) < 2 && // password can be void
sscanf(param, "%s %s %[^\r\n]", name, sex, password) < 2) { // password can be void
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte, un sexe et un mot de passe svp.\n");
printf("<exemple> add nomtest Male motdepassetest\n");
ladmin_log("Nombre incorrect de param�tres pour cr�er un compte (commande 'add')." RETCODE);
} else {
printf("Please input an account name, a sex and a password.\n");
printf("<example> add testname Male testpass\n");
ladmin_log("Incomplete parameters to create an account ('add' command)." RETCODE);
}
return 136;
}
strcpy(email, "a@a.com"); // default email
} else { // 1: create command
if (sscanf(param, "\"%[^\"]\" %s %s %[^\r\n]", name, sex, email, password) < 3 && // password can be void
sscanf(param, "'%[^']' %s %s %[^\r\n]", name, sex, email, password) < 3 && // password can be void
sscanf(param, "%s %s %s %[^\r\n]", name, sex, email, password) < 3) { // password can be void
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte, un sexe et un mot de passe svp.\n");
printf("<exemple> create nomtest Male mo@mail.com motdepassetest\n");
ladmin_log("Nombre incorrect de param�tres pour cr�er un compte (commande 'create')." RETCODE);
} else {
printf("Please input an account name, a sex and a password.\n");
printf("<example> create testname Male my@mail.com testpass\n");
ladmin_log("Incomplete parameters to create an account ('create' command)." RETCODE);
}
return 136;
}
}
if (verify_accountname(name) == 0) {
return 102;
}
/* for(i = 0; name[i]; i++) {
if (strchr("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz-_", name[i]) == NULL) {
if (defaultlanguage == 'F') {
printf("Caract�re interdit (%c) trouv� dans le nom du compte (%d%s caract�re).\n", name[i], i+1, makeordinal(i+1));
ladmin_log("Caract�re interdit (%c) trouv� dans le nom du compte (%d%s caract�re)." RETCODE, name[i], i+1, makeordinal(i+1));
} else {
printf("Illegal character (%c) found in the account name (%d%s character).\n", name[i], i+1, makeordinal(i+1));
ladmin_log("Illegal character (%c) found in the account name (%d%s character)." RETCODE, name[i], i+1, makeordinal(i+1));
}
return 101;
}
}*/
sex[0] = toupper(sex[0]);
if (strchr("MF", sex[0]) == NULL) {
if (defaultlanguage == 'F') {
printf("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex);
ladmin_log("Sexe incorrect [%s]. Entrez M ou F svp." RETCODE, sex);
} else {
printf("Illegal gender [%s]. Please input M or F.\n", sex);
ladmin_log("Illegal gender [%s]. Please input M or F." RETCODE, sex);
}
return 103;
}
if (strlen(email) < 3) {
if (defaultlanguage == 'F') {
printf("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email);
ladmin_log("Email trop courte [%s]. Entrez une e-mail valide svp." RETCODE, email);
} else {
printf("Email is too short [%s]. Please input a valid e-mail.\n", email);
ladmin_log("Email is too short [%s]. Please input a valid e-mail." RETCODE, email);
}
return 109;
}
if (strlen(email) > 39) {
if (defaultlanguage == 'F') {
printf("Email trop longue [%s]. Entrez une e-mail de 39 caract�res maximum svp.\n", email);
ladmin_log("Email trop longue [%s]. Entrez une e-mail de 39 caract�res maximum svp." RETCODE, email);
} else {
printf("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email);
ladmin_log("Email is too long [%s]. Please input an e-mail with 39 bytes at the most." RETCODE, email);
}
return 109;
}
if (e_mail_check(email) == 0) {
if (defaultlanguage == 'F') {
printf("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email);
ladmin_log("Email incorrecte [%s]. Entrez une e-mail valide svp." RETCODE, email);
} else {
printf("Invalid email [%s]. Please input a valid e-mail.\n", email);
ladmin_log("Invalid email [%s]. Please input a valid e-mail." RETCODE, email);
}
return 109;
}
if (strlen(password) == 0) {
if (typepasswd(password) == 0)
return 108;
}
if (verify_password(password) == 0)
return 104;
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour cr�er un compte." RETCODE);
} else {
ladmin_log("Request to login-server to create an account." RETCODE);
}
WFIFOW(login_fd,0) = 0x7930;
memcpy(WFIFOP(login_fd,2), name, 24);
memcpy(WFIFOP(login_fd,26), password, 24);
WFIFOB(login_fd,50) = sex[0];
memcpy(WFIFOP(login_fd,51), email, 40);
WFIFOSET(login_fd,91);
bytes_to_read = 1;
return 0;
}
//---------------------------------------------------------------------------------
// Sub-function: Add/substract time to the final date of a banishment of an account
//---------------------------------------------------------------------------------
int banaddaccount(char* param) {
char name[1023], modif[1023];
int year, month, day, hour, minute, second;
char * p_modif;
int value, i;
memset(name, '\0', sizeof(name));
memset(modif, '\0', sizeof(modif));
year = month = day = hour = minute = second = 0;
if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 &&
sscanf(param, "'%[^']' %[^\r\n]", name, modif) < 2 &&
sscanf(param, "%s %[^\r\n]", name, modif) < 2) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte et un modificateur svp.\n");
printf(" <exemple> banadd nomtest +1m-2mn1s-6y\n");
printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
printf(" et 6 ans dans le m�me temps.\n");
ladmin_log("Nombre incorrect de param�tres pour modifier la fin de ban d'un compte (commande 'banadd')." RETCODE);
} else {
printf("Please input an account name and a modifier.\n");
printf(" <example>: banadd testname +1m-2mn1s-6y\n");
printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n");
printf(" and 6 years at the same time.\n");
ladmin_log("Incomplete parameters to modify the ban date/time of an account ('banadd' command)." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
// lowercase for modif
for (i = 0; modif[i]; i++)
modif[i] = tolower(modif[i]);
p_modif = modif;
while (strlen(p_modif) > 0) {
value = atoi(p_modif);
if (value == 0) {
p_modif++;
} else {
if (p_modif[0] == '-' || p_modif[0] == '+')
p_modif++;
while (strlen(p_modif) > 0 && p_modif[0] >= '0' && p_modif[0] <= '9') {
p_modif++;
}
if (p_modif[0] == 's') {
second = value;
p_modif++;
} else if (p_modif[0] == 'm' && p_modif[1] == 'n') {
minute = value;
p_modif += 2;
} else if (p_modif[0] == 'h') {
hour = value;
p_modif++;
} else if (p_modif[0] == 'd' || p_modif[0] == 'j') {
day = value;
p_modif += 2;
} else if (p_modif[0] == 'm') {
month = value;
p_modif++;
} else if (p_modif[0] == 'y' || p_modif[0] == 'a') {
year = value;
p_modif++;
} else {
p_modif++;
}
}
}
if (defaultlanguage == 'F') {
printf(" ann�e: %d\n", year);
printf(" mois: %d\n", month);
printf(" jour: %d\n", day);
printf(" heure: %d\n", hour);
printf(" minute: %d\n", minute);
printf(" seconde: %d\n", second);
} else {
printf(" year: %d\n", year);
printf(" month: %d\n", month);
printf(" day: %d\n", day);
printf(" hour: %d\n", hour);
printf(" minute: %d\n", minute);
printf(" second: %d\n", second);
}
if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0 && second == 0) {
if (defaultlanguage == 'F') {
printf("Vous devez entrer un ajustement avec cette commande, svp:\n");
printf(" Valeur d'ajustement (-1, 1, +1, etc...)\n");
printf(" Element modifi�:\n");
printf(" a ou y: ann�e\n");
printf(" m: mois\n");
printf(" j ou d: jour\n");
printf(" h: heure\n");
printf(" mn: minute\n");
printf(" s: seconde\n");
printf(" <exemple> banadd nomtest +1m-2mn1s-6y\n");
printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
printf(" et 6 ans dans le m�me temps.\n");
ladmin_log("Aucun ajustement n'est pas un ajustement (commande 'banadd')." RETCODE);
} else {
printf("Please give an adjustment with this command:\n");
printf(" Adjustment value (-1, 1, +1, etc...)\n");
printf(" Modified element:\n");
printf(" a or y: year\n");
printf(" m: month\n");
printf(" j or d: day\n");
printf(" h: hour\n");
printf(" mn: minute\n");
printf(" s: second\n");
printf(" <example> banadd testname +1m-2mn1s-6y\n");
printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n");
printf(" and 6 years at the same time.\n");
ladmin_log("No adjustment isn't an adjustment ('banadd' command)." RETCODE);
}
return 137;
}
if (year > 127 || year < -127) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement d'ann�es correct (de -127 � 127), svp.\n");
ladmin_log("Ajustement de l'ann�e hors norme (commande 'banadd')." RETCODE);
} else {
printf("Please give a correct adjustment for the years (from -127 to 127).\n");
ladmin_log("Abnormal adjustement for the year ('banadd' command)." RETCODE);
}
return 137;
}
if (month > 255 || month < -255) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement de mois correct (de -255 � 255), svp.\n");
ladmin_log("Ajustement du mois hors norme (commande 'banadd')." RETCODE);
} else {
printf("Please give a correct adjustment for the months (from -255 to 255).\n");
ladmin_log("Abnormal adjustement for the month ('banadd' command)." RETCODE);
}
return 137;
}
if (day > 32767 || day < -32767) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement de jours correct (de -32767 � 32767), svp.\n");
ladmin_log("Ajustement des jours hors norme (commande 'banadd')." RETCODE);
} else {
printf("Please give a correct adjustment for the days (from -32767 to 32767).\n");
ladmin_log("Abnormal adjustement for the days ('banadd' command)." RETCODE);
}
return 137;
}
if (hour > 32767 || hour < -32767) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement d'heures correct (de -32767 � 32767), svp.\n");
ladmin_log("Ajustement des heures hors norme (commande 'banadd')." RETCODE);
} else {
printf("Please give a correct adjustment for the hours (from -32767 to 32767).\n");
ladmin_log("Abnormal adjustement for the hours ('banadd' command)." RETCODE);
}
return 137;
}
if (minute > 32767 || minute < -32767) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement de minutes correct (de -32767 � 32767), svp.\n");
ladmin_log("Ajustement des minutes hors norme (commande 'banadd')." RETCODE);
} else {
printf("Please give a correct adjustment for the minutes (from -32767 to 32767).\n");
ladmin_log("Abnormal adjustement for the minutes ('banadd' command)." RETCODE);
}
return 137;
}
if (second > 32767 || second < -32767) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement de secondes correct (de -32767 � 32767), svp.\n");
ladmin_log("Ajustement des secondes hors norme (commande 'banadd')." RETCODE);
} else {
printf("Please give a correct adjustment for the seconds (from -32767 to 32767).\n");
ladmin_log("Abnormal adjustement for the seconds ('banadd' command)." RETCODE);
}
return 137;
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour modifier la date d'un bannissement." RETCODE);
} else {
ladmin_log("Request to login-server to modify a ban date/time." RETCODE);
}
WFIFOW(login_fd,0) = 0x794c;
memcpy(WFIFOP(login_fd,2), name, 24);
WFIFOW(login_fd,26) = (short)year;
WFIFOW(login_fd,28) = (short)month;
WFIFOW(login_fd,30) = (short)day;
WFIFOW(login_fd,32) = (short)hour;
WFIFOW(login_fd,34) = (short)minute;
WFIFOW(login_fd,36) = (short)second;
WFIFOSET(login_fd,38);
bytes_to_read = 1;
return 0;
}
//-----------------------------------------------------------------------
// Sub-function of sub-function banaccount, unbanaccount or bansetaccount
// Set the final date of a banishment of an account
//-----------------------------------------------------------------------
int bansetaccountsub(char* name, char* date, char* time) {
int year, month, day, hour, minute, second;
time_t ban_until_time; // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban)
struct tm *tmtime;
year = month = day = hour = minute = second = 0;
ban_until_time = 0;
tmtime = localtime(&ban_until_time); // initialize
if (verify_accountname(name) == 0) {
return 102;
}
if (atoi(date) != 0 &&
((sscanf(date, "%d/%d/%d", &year, &month, &day) < 3 &&
sscanf(date, "%d-%d-%d", &year, &month, &day) < 3 &&
sscanf(date, "%d.%d.%d", &year, &month, &day) < 3) ||
sscanf(time, "%d:%d:%d", &hour, &minute, &second) < 3)) {
if (defaultlanguage == 'F') {
printf("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n");
printf("Vous pouvez aussi mettre 0 � la place si vous utilisez la commande 'banset'.\n");
ladmin_log("Format incorrect pour la date/heure (commande'banset' ou 'ban')." RETCODE);
} else {
printf("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n");
printf("You can imput 0 instead of if you use 'banset' command.\n");
ladmin_log("Invalid format for the date/time ('banset' or 'ban' command)." RETCODE);
}
return 102;
}
if (atoi(date) == 0) {
ban_until_time = 0;
} else {
if (year < 70) {
year = year + 100;
}
if (year >= 1900) {
year = year - 1900;
}
if (month < 1 || month > 12) {
if (defaultlanguage == 'F') {
printf("Entrez un mois correct svp (entre 1 et 12).\n");
ladmin_log("Mois incorrect pour la date (command 'banset' ou 'ban')." RETCODE);
} else {
printf("Please give a correct value for the month (from 1 to 12).\n");
ladmin_log("Invalid month for the date ('banset' or 'ban' command)." RETCODE);
}
return 102;
}
month = month - 1;
if (day < 1 || day > 31) {
if (defaultlanguage == 'F') {
printf("Entrez un jour correct svp (entre 1 et 31).\n");
ladmin_log("Jour incorrect pour la date (command 'banset' ou 'ban')." RETCODE);
} else {
printf("Please give a correct value for the day (from 1 to 31).\n");
ladmin_log("Invalid day for the date ('banset' or 'ban' command)." RETCODE);
}
return 102;
}
if (((month == 3 || month == 5 || month == 8 || month == 10) && day > 30) ||
(month == 1 && day > 29)) {
if (defaultlanguage == 'F') {
printf("Entrez un jour correct en fonction du mois (%d) svp.\n", month);
ladmin_log("Jour incorrect pour ce mois correspondant (command 'banset' ou 'ban')." RETCODE);
} else {
printf("Please give a correct value for a day of this month (%d).\n", month);
ladmin_log("Invalid day for this month ('banset' or 'ban' command)." RETCODE);
}
return 102;
}
if (hour < 0 || hour > 23) {
if (defaultlanguage == 'F') {
printf("Entrez une heure correcte svp (entre 0 et 23).\n");
ladmin_log("Heure incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE);
} else {
printf("Please give a correct value for the hour (from 0 to 23).\n");
ladmin_log("Invalid hour for the time ('banset' or 'ban' command)." RETCODE);
}
return 102;
}
if (minute < 0 || minute > 59) {
if (defaultlanguage == 'F') {
printf("Entrez des minutes correctes svp (entre 0 et 59).\n");
ladmin_log("Minute incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE);
} else {
printf("Please give a correct value for the minutes (from 0 to 59).\n");
ladmin_log("Invalid minute for the time ('banset' or 'ban' command)." RETCODE);
}
return 102;
}
if (second < 0 || second > 59) {
if (defaultlanguage == 'F') {
printf("Entrez des secondes correctes svp (entre 0 et 59).\n");
ladmin_log("Seconde incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE);
} else {
printf("Please give a correct value for the seconds (from 0 to 59).\n");
ladmin_log("Invalid second for the time ('banset' or 'ban' command)." RETCODE);
}
return 102;
}
tmtime->tm_year = year;
tmtime->tm_mon = month;
tmtime->tm_mday = day;
tmtime->tm_hour = hour;
tmtime->tm_min = minute;
tmtime->tm_sec = second;
tmtime->tm_isdst = -1; // -1: no winter/summer time modification
ban_until_time = mktime(tmtime);
if (ban_until_time == -1) {
if (defaultlanguage == 'F') {
printf("Date incorrecte.\n");
printf("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n");
printf("Vous pouvez aussi mettre 0 � la place si vous utilisez la commande 'banset'.\n");
ladmin_log("Date incorrecte. (command 'banset' ou 'ban')." RETCODE);
} else {
printf("Invalid date.\n");
printf("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n");
printf("You can imput 0 instead of if you use 'banset' command.\n");
ladmin_log("Invalid date. ('banset' or 'ban' command)." RETCODE);
}
return 102;
}
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour fixer un ban." RETCODE);
} else {
ladmin_log("Request to login-server to set a ban." RETCODE);
}
WFIFOW(login_fd,0) = 0x794a;
memcpy(WFIFOP(login_fd,2), name, 24);
WFIFOL(login_fd,26) = (int)ban_until_time;
WFIFOSET(login_fd,30);
bytes_to_read = 1;
return 0;
}
//---------------------------------------------------------------------
// Sub-function: Set the final date of a banishment of an account (ban)
//---------------------------------------------------------------------
int banaccount(char* param) {
char name[1023], date[1023], time[1023];
memset(name, '\0', sizeof(name));
memset(date, '\0', sizeof(date));
memset(time, '\0', sizeof(time));
if (sscanf(param, "%s %s \"%[^\"]\"", date, time, name) < 3 &&
sscanf(param, "%s %s '%[^']'", date, time, name) < 3 &&
sscanf(param, "%s %s %[^\r\n]", date, time, name) < 3) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte, une date et une heure svp.\n");
printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
printf(" banset <nom_du_compte> 0 (0 = d�-bani)\n");
printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n");
printf(" unban/unbanish <nom du compte>\n");
printf(" Heure par d�faut [hh:mm:ss]: 23:59:59.\n");
ladmin_log("Nombre incorrect de param�tres pour fixer un ban (commande 'banset' ou 'ban')." RETCODE);
} else {
printf("Please input an account name, a date and a hour.\n");
printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
printf(" banset <account_name> 0 (0 = un-banished)\n");
printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
printf(" unban/unbanish <account name>\n");
printf(" Default time [hh:mm:ss]: 23:59:59.\n");
ladmin_log("Incomplete parameters to set a ban ('banset' or 'ban' command)." RETCODE);
}
return 136;
}
return bansetaccountsub(name, date, time);
}
//------------------------------------------------------------------------
// Sub-function: Set the final date of a banishment of an account (banset)
//------------------------------------------------------------------------
int bansetaccount(char* param) {
char name[1023], date[1023], time[1023];
memset(name, '\0', sizeof(name));
memset(date, '\0', sizeof(date));
memset(time, '\0', sizeof(time));
if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void
sscanf(param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void
sscanf(param, "%s %s %[^\r\n]", name, date, time) < 2) { // if date = 0, time can be void
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte, une date et une heure svp.\n");
printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
printf(" banset <nom_du_compte> 0 (0 = d�-bani)\n");
printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n");
printf(" unban/unbanish <nom du compte>\n");
printf(" Heure par d�faut [hh:mm:ss]: 23:59:59.\n");
ladmin_log("Nombre incorrect de param�tres pour fixer un ban (commande 'banset' ou 'ban')." RETCODE);
} else {
printf("Please input an account name, a date and a hour.\n");
printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
printf(" banset <account_name> 0 (0 = un-banished)\n");
printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
printf(" unban/unbanish <account name>\n");
printf(" Default time [hh:mm:ss]: 23:59:59.\n");
ladmin_log("Incomplete parameters to set a ban ('banset' or 'ban' command)." RETCODE);
}
return 136;
}
if (time[0] == '\0')
strcpy(time, "23:59:59");
return bansetaccountsub(name, date, time);
}
//-------------------------------------------------
// Sub-function: unbanishment of an account (unban)
//-------------------------------------------------
int unbanaccount(char* param) {
char name[1023];
memset(name, '\0', sizeof(name));
if (strlen(param) == 0 ||
(sscanf(param, "\"%[^\"]\"", name) < 1 &&
sscanf(param, "'%[^']'", name) < 1 &&
sscanf(param, "%[^\r\n]", name) < 1) ||
strlen(name) == 0) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte svp.\n");
printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
printf(" banset <nom_du_compte> 0 (0 = d�-bani)\n");
printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n");
printf(" unban/unbanish <nom du compte>\n");
printf(" Heure par d�faut [hh:mm:ss]: 23:59:59.\n");
ladmin_log("Nombre incorrect de param�tres pour fixer un ban (commande 'unban')." RETCODE);
} else {
printf("Please input an account name.\n");
printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
printf(" banset <account_name> 0 (0 = un-banished)\n");
printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
printf(" unban/unbanish <account name>\n");
printf(" Default time [hh:mm:ss]: 23:59:59.\n");
ladmin_log("Incomplete parameters to set a ban ('unban' command)." RETCODE);
}
return 136;
}
return bansetaccountsub(name, "0", "");
}
//---------------------------------------------------------
// Sub-function: Asking to check the validity of a password
// (Note: never send back a password with login-server!! security of passwords)
//---------------------------------------------------------
int checkaccount(char* param) {
char name[1023], password[1023];
memset(name, '\0', sizeof(name));
memset(password, '\0', sizeof(password));
if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 && // password can be void
sscanf(param, "'%[^']' %[^\r\n]", name, password) < 1 && // password can be void
sscanf(param, "%s %[^\r\n]", name, password) < 1) { // password can be void
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte svp.\n");
printf("<exemple> check testname motdepasse\n");
ladmin_log("Nombre incorrect de param�tres pour tester le mot d'un passe d'un compte (commande 'check')." RETCODE);
} else {
printf("Please input an account name.\n");
printf("<example> check testname password\n");
ladmin_log("Incomplete parameters to check the password of an account ('check' command)." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
if (strlen(password) == 0) {
if (typepasswd(password) == 0)
return 134;
}
if (verify_password(password) == 0)
return 131;
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour test un mot de passe." RETCODE);
} else {
ladmin_log("Request to login-server to check a password." RETCODE);
}
WFIFOW(login_fd,0) = 0x793a;
memcpy(WFIFOP(login_fd,2), name, 24);
memcpy(WFIFOP(login_fd,26), password, 24);
WFIFOSET(login_fd,50);
bytes_to_read = 1;
return 0;
}
//------------------------------------------------
// Sub-function: Asking for deletion of an account
//------------------------------------------------
int delaccount(char* param) {
char name[1023];
char letter;
char confirm[1023];
int i;
memset(name, '\0', sizeof(name));
if (strlen(param) == 0 ||
(sscanf(param, "\"%[^\"]\"", name) < 1 &&
sscanf(param, "'%[^']'", name) < 1 &&
sscanf(param, "%[^\r\n]", name) < 1) ||
strlen(name) == 0) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte svp.\n");
printf("<exemple> del nomtestasupprimer\n");
ladmin_log("Aucun nom donn� pour supprimer un compte (commande 'delete')." RETCODE);
} else {
printf("Please input an account name.\n");
printf("<example> del testnametodelete\n");
ladmin_log("No name given to delete an account ('delete' command)." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
memset(confirm, '\0', sizeof(confirm));
while ((confirm[0] != 'o' || defaultlanguage != 'F') && confirm[0] != 'n' && (confirm[0] != 'y' || defaultlanguage == 'F')) {
if (defaultlanguage == 'F')
printf("\033[1;36m ** Etes-vous vraiment s�r de vouloir SUPPRIMER le compte [$userid]? (o/n) > \033[0m");
else
printf("\033[1;36m ** Are you really sure to DELETE account [$userid]? (y/n) > \033[0m");
fflush(stdout);
memset(confirm, '\0', sizeof(confirm));
i = 0;
while ((letter = getchar()) != '\n')
confirm[i++] = letter;
}
if (confirm[0] == 'n') {
if (defaultlanguage == 'F') {
printf("Suppression annul�e.\n");
ladmin_log("Suppression annul�e par l'utilisateur (commande 'delete')." RETCODE);
} else {
printf("Deletion canceled.\n");
ladmin_log("Deletion canceled by user ('delete' command)." RETCODE);
}
return 121;
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour d�truire un compte." RETCODE);
} else {
ladmin_log("Request to login-server to delete an acount." RETCODE);
}
WFIFOW(login_fd,0) = 0x7932;
memcpy(WFIFOP(login_fd,2), name, 24);
WFIFOSET(login_fd,26);
bytes_to_read = 1;
return 0;
}
//----------------------------------------------------------
// Sub-function: Asking to modification of an account e-mail
//----------------------------------------------------------
int changeemail(char* param) {
char name[1023], email[1023];
memset(name, '\0', sizeof(name));
memset(email, '\0', sizeof(email));
if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, email) < 2 &&
sscanf(param, "'%[^']' %[^\r\n]", name, email) < 2 &&
sscanf(param, "%s %[^\r\n]", name, email) < 2) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte et une email svp.\n");
printf("<exemple> email testname nouveauemail\n");
ladmin_log("Nombre incorrect de param�tres pour changer l'email d'un compte (commande 'email')." RETCODE);
} else {
printf("Please input an account name and an email.\n");
printf("<example> email testname newemail\n");
ladmin_log("Incomplete parameters to change the email of an account ('email' command)." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
if (strlen(email) < 3) {
if (defaultlanguage == 'F') {
printf("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email);
ladmin_log("Email trop courte [%s]. Entrez une e-mail valide svp." RETCODE, email);
} else {
printf("Email is too short [%s]. Please input a valid e-mail.\n", email);
ladmin_log("Email is too short [%s]. Please input a valid e-mail." RETCODE, email);
}
return 109;
}
if (strlen(email) > 39) {
if (defaultlanguage == 'F') {
printf("Email trop longue [%s]. Entrez une e-mail de 39 caract�res maximum svp.\n", email);
ladmin_log("Email trop longue [%s]. Entrez une e-mail de 39 caract�res maximum svp." RETCODE, email);
} else {
printf("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email);
ladmin_log("Email is too long [%s]. Please input an e-mail with 39 bytes at the most." RETCODE, email);
}
return 109;
}
if (e_mail_check(email) == 0) {
if (defaultlanguage == 'F') {
printf("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email);
ladmin_log("Email incorrecte [%s]. Entrez une e-mail valide svp." RETCODE, email);
} else {
printf("Invalid email [%s]. Please input a valid e-mail.\n", email);
ladmin_log("Invalid email [%s]. Please input a valid e-mail." RETCODE, email);
}
return 109;
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour changer une email." RETCODE);
} else {
ladmin_log("Request to login-server to change an email." RETCODE);
}
WFIFOW(login_fd,0) = 0x7940;
memcpy(WFIFOP(login_fd,2), name, 24);
memcpy(WFIFOP(login_fd,26), email, 40);
WFIFOSET(login_fd,66);
bytes_to_read = 1;
return 0;
}
//-----------------------------------------------------
// Sub-function: Asking of the number of online players
//-----------------------------------------------------
int getlogincount() {
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour obtenir le nombre de joueurs en jeu." RETCODE);
} else {
ladmin_log("Request to login-server to obtain the # of online players." RETCODE);
}
WFIFOW(login_fd,0) = 0x7938;
WFIFOSET(login_fd,2);
bytes_to_read = 1;
return 0;
}
//----------------------------------------------------------
// Sub-function: Asking to modify the GM level of an account
//----------------------------------------------------------
int changegmlevel(char* param) {
char name[1023];
int GM_level;
memset(name, '\0', sizeof(name));
GM_level = 0;
if (sscanf(param, "\"%[^\"]\" %d", name, &GM_level) < 1 &&
sscanf(param, "'%[^']' %d", name, &GM_level) < 1 &&
sscanf(param, "%s %d", name, &GM_level) < 1) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte et un niveau de GM svp.\n");
printf("<exemple> gm nomtest 80\n");
ladmin_log("Nombre incorrect de param�tres pour changer le Niveau de GM d'un compte (commande 'gm')." RETCODE);
} else {
printf("Please input an account name and a GM level.\n");
printf("<example> gm testname 80\n");
ladmin_log("Incomplete parameters to change the GM level of an account ('gm' command)." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
if (GM_level < 0 || GM_level > 99) {
if (defaultlanguage == 'F') {
printf("Niveau de GM incorrect [%d]. Entrez une valeur de 0 � 99 svp.\n", GM_level);
ladmin_log("Niveau de GM incorrect [%d]. La valeur peut �tre de 0 � 99." RETCODE, GM_level);
} else {
printf("Illegal GM level [%d]. Please input a value from 0 to 99.\n", GM_level);
ladmin_log("Illegal GM level [%d]. The value can be from 0 to 99." RETCODE, GM_level);
}
return 103;
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour changer un niveau de GM." RETCODE);
} else {
ladmin_log("Request to login-server to change a GM level." RETCODE);
}
WFIFOW(login_fd,0) = 0x793e;
memcpy(WFIFOP(login_fd,2), name, 24);
WFIFOB(login_fd,26) = GM_level;
WFIFOSET(login_fd,27);
bytes_to_read = 1;
return 0;
}
//---------------------------------------------
// Sub-function: Asking to obtain an account id
//---------------------------------------------
int idaccount(char* param) {
char name[1023];
memset(name, '\0', sizeof(name));
if (strlen(param) == 0 ||
(sscanf(param, "\"%[^\"]\"", name) < 1 &&
sscanf(param, "'%[^']'", name) < 1 &&
sscanf(param, "%[^\r\n]", name) < 1) ||
strlen(name) == 0) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte svp.\n");
printf("<exemple> id nomtest\n");
ladmin_log("Aucun nom donn� pour rechecher l'id d'un compte (commande 'id')." RETCODE);
} else {
printf("Please input an account name.\n");
printf("<example> id testname\n");
ladmin_log("No name given to search an account id ('id' command)." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour conna�tre l'id d'un compte." RETCODE);
} else {
ladmin_log("Request to login-server to know an account id." RETCODE);
}
WFIFOW(login_fd,0) = 0x7944;
memcpy(WFIFOP(login_fd,2), name, 24);
WFIFOSET(login_fd,26);
bytes_to_read = 1;
return 0;
}
//----------------------------------------------------------------------------
// Sub-function: Asking to displaying information about an account (by its id)
//----------------------------------------------------------------------------
int infoaccount(int account_id) {
if (account_id < 0) {
if (defaultlanguage == 'F') {
printf("Entrez un id ayant une valeur positive svp.\n");
ladmin_log("Une valeur n�gative a �t� donn� pour trouver le compte." RETCODE);
} else {
printf("Please input a positive value for the id.\n");
ladmin_log("Negative value was given to found the account." RETCODE);
}
return 136;
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour obtenir le information d'un compte (par l'id)." RETCODE);
} else {
ladmin_log("Request to login-server to obtain information about an account (by its id)." RETCODE);
}
WFIFOW(login_fd,0) = 0x7954;
WFIFOL(login_fd,2) = account_id;
WFIFOSET(login_fd,6);
bytes_to_read = 1;
return 0;
}
//---------------------------------------
// Sub-function: Send a broadcast message
//---------------------------------------
int sendbroadcast(short type, char* message) {
if (strlen(message) == 0) {
if (defaultlanguage == 'F') {
printf("Entrez un message svp.\n");
if (type == 0) {
printf("<exemple> kami un message\n");
} else {
printf("<exemple> kamib un message\n");
}
ladmin_log("Le message est vide (commande 'kami(b)')." RETCODE);
} else {
printf("Please input a message.\n");
if (type == 0) {
printf("<example> kami a message\n");
} else {
printf("<example> kamib a message\n");
}
ladmin_log("The message is void ('kami(b)' command)." RETCODE);
}
return 136;
}
WFIFOW(login_fd,0) = 0x794e;
WFIFOW(login_fd,2) = type;
WFIFOL(login_fd,4) = strlen(message)+1;
memcpy(WFIFOP(login_fd,8), message, strlen(message)+1);
WFIFOSET(login_fd,8+strlen(message)+1);
bytes_to_read = 1;
return 0;
}
//--------------------------------------------
// Sub-function: Change language of displaying
//--------------------------------------------
int changelanguage(char* language) {
if (strlen(language) == 0) {
if (defaultlanguage == 'F') {
printf("Entrez une langue svp.\n");
printf("<exemple> language english\n");
printf(" language fran�ais\n");
ladmin_log("La langue est vide (commande 'language')." RETCODE);
} else {
printf("Please input a language.\n");
printf("<example> language english\n");
printf(" language fran�ais\n");
ladmin_log("The language is void ('language' command)." RETCODE);
}
return 136;
}
language[0] = toupper(language[0]);
if (language[0] == 'F' || language[0] == 'E') {
defaultlanguage = language[0];
if (defaultlanguage == 'F') {
printf("Changement de la langue d'affichage en Fran�ais.\n");
ladmin_log("Changement de la langue d'affichage en Fran�ais." RETCODE);
} else {
printf("Displaying language changed to English.\n");
ladmin_log("Displaying language changed to English." RETCODE);
}
} else {
if (defaultlanguage == 'F') {
printf("Langue non param�tr�e (langues possibles: 'Fran�ais' ou 'English').\n");
ladmin_log("Langue non param�tr�e (Fran�ais ou English n�cessaire)." RETCODE);
} else {
printf("Undefined language (possible languages: Fran�ais or English).\n");
ladmin_log("Undefined language (must be Fran�ais or English)." RETCODE);
}
}
return 0;
}
//--------------------------------------------------------
// Sub-function: Asking to Displaying of the accounts list
//--------------------------------------------------------
int listaccount(char* param, int type) {
//int list_first, list_last, list_type; // parameter to display a list of accounts
int i;
list_type = type;
// set default values
list_first = 0;
list_last = 0;
if (list_type == 1) { // if listgm
// get all accounts = use default
} else if (list_type == 2) { // if search
for (i = 0; param[i]; i++)
param[i] = tolower(param[i]);
// get all accounts = use default
} else if (list_type == 3) { // if listban
// get all accounts = use default
} else if (list_type == 4) { // if listok
// get all accounts = use default
} else { // if list (list_type == 0)
switch(sscanf(param, "%d %d", &list_first, &list_last)) {
case 0:
// get all accounts = use default
break;
case 1:
list_last = 0;
// use tests of the following value
default:
if (list_first < 0)
list_first = 0;
if (list_last < list_first || list_last < 0)
list_last = 0;
break;
}
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour obtenir la liste des comptes de %d � %d." RETCODE, list_first, list_last);
} else {
ladmin_log("Request to login-server to obtain the list of accounts from %d to %d." RETCODE, list_first, list_last);
}
WFIFOW(login_fd,0) = 0x7920;
WFIFOL(login_fd,2) = list_first;
WFIFOL(login_fd,6) = list_last;
WFIFOSET(login_fd,10);
bytes_to_read = 1;
// 0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567
if (defaultlanguage == 'F') {
printf(" id_compte GM nom_utilisateur sexe count statut\n");
} else {
printf("account_id GM user_name sex count state\n");
}
printf("-------------------------------------------------------------------------------\n");
list_count = 0;
return 0;
}
//--------------------------------------------
// Sub-function: Asking to modify a memo field
//--------------------------------------------
int changememo(char* param) {
char name[1023], memo[1023];
memset(name, '\0', sizeof(name));
memset(memo, '\0', sizeof(memo));
if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, memo) < 1 && // memo can be void
sscanf(param, "'%[^']' %[^\r\n]", name, memo) < 1 && // memo can be void
sscanf(param, "%s %[^\r\n]", name, memo) < 1) { // memo can be void
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte et un m�mo svp.\n");
printf("<exemple> memo nomtest nouveau memo\n");
ladmin_log("Nombre incorrect de param�tres pour changer le m�mo d'un compte (commande 'email')." RETCODE);
} else {
printf("Please input an account name and a memo.\n");
printf("<example> memo testname new memo\n");
ladmin_log("Incomplete parameters to change the memo of an account ('email' command)." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
if (strlen(memo) > 254) {
if (defaultlanguage == 'F') {
printf("M�mo trop long (%d caract�res).\n", strlen(memo));
printf("Entrez un m�mo de 254 caract�res maximum svp.\n");
ladmin_log("M�mo trop long (%d caract�res). Entrez un m�mo de 254 caract�res maximum svp." RETCODE, strlen(memo));
} else {
printf("Memo is too long (%d characters).\n", strlen(memo));
printf("Please input a memo of 254 bytes at the maximum.\n");
ladmin_log("Email is too long (%d characters). Please input a memo of 254 bytes at the maximum." RETCODE, strlen(memo));
}
return 102;
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour changer un m�mo." RETCODE);
} else {
ladmin_log("Request to login-server to change a memo." RETCODE);
}
WFIFOW(login_fd,0) = 0x7942;
memcpy(WFIFOP(login_fd,2), name, 24);
WFIFOW(login_fd,26) = strlen(memo);
if (strlen(memo) > 0)
memcpy(WFIFOP(login_fd,28), memo, strlen(memo));
WFIFOSET(login_fd,28+strlen(memo));
bytes_to_read = 1;
return 0;
}
//-----------------------------------------------
// Sub-function: Asking to obtain an account name
//-----------------------------------------------
int nameaccount(int id) {
if (id < 0) {
if (defaultlanguage == 'F') {
printf("Entrez un id ayant une valeur positive svp.\n");
ladmin_log("Id n�gatif donn� pour rechecher le nom d'un compte (commande 'name')." RETCODE);
} else {
printf("Please input a positive value for the id.\n");
ladmin_log("Negativ id given to search an account name ('name' command)." RETCODE);
}
return 136;
}
if (defaultlanguage == 'F')
ladmin_log("Envoi d'un requ�te au serveur de logins pour conna�tre le nom d'un compte." RETCODE);
else
ladmin_log("Request to login-server to know an account name." RETCODE);
WFIFOW(login_fd,0) = 0x7946;
WFIFOL(login_fd,2) = id;
WFIFOSET(login_fd,6);
bytes_to_read = 1;
return 0;
}
//------------------------------------------
// Sub-function: Asking to modify a password
// (Note: never send back a password with login-server!! security of passwords)
//------------------------------------------
int changepasswd(char* param) {
char name[1023], password[1023];
memset(name, '\0', sizeof(name));
memset(password, '\0', sizeof(password));
if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 &&
sscanf(param, "'%[^']' %[^\r\n]", name, password) < 1 &&
sscanf(param, "%s %[^\r\n]", name, password) < 1) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte svp.\n");
printf("<exemple> passwd nomtest nouveaumotdepasse\n");
ladmin_log("Nombre incorrect de param�tres pour changer le mot d'un passe d'un compte (commande 'password')." RETCODE);
} else {
printf("Please input an account name.\n");
printf("<example> passwd testname newpassword\n");
ladmin_log("Incomplete parameters to change the password of an account ('password' command)." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
if (strlen(password) == 0) {
if (typepasswd(password) == 0)
return 134;
}
if (verify_password(password) == 0)
return 131;
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour changer un mot de passe." RETCODE);
} else {
ladmin_log("Request to login-server to change a password." RETCODE);
}
WFIFOW(login_fd,0) = 0x7934;
memcpy(WFIFOP(login_fd,2), name, 24);
memcpy(WFIFOP(login_fd,26), password, 24);
WFIFOSET(login_fd,50);
bytes_to_read = 1;
return 0;
}
//----------------------------------------------------------------------
// Sub-function: Request to login-server to reload GM configuration file
// this function have no answer
//----------------------------------------------------------------------
int reloadGM() {
WFIFOW(login_fd,0) = 0x7955;
WFIFOSET(login_fd,2);
bytes_to_read = 0;
if (defaultlanguage == 'F') {
ladmin_log("Demande de recharger le fichier de configuration des GM envoy�e." RETCODE);
printf("Demande de recharger le fichier de configuration des GM envoy�e.\n");
printf("V�rifiez les comptes GM actuels (apr�s rechargement):\n");
} else {
ladmin_log("Request to reload the GM configuration file sended." RETCODE);
printf("Request to reload the GM configuration file sended.\n");
printf("Check the actual GM accounts (after reloading):\n");
}
listaccount(parameters, 1); // 1: to list only GM
return 180;
}
//-----------------------------------------------------
// Sub-function: Asking to modify the sex of an account
//-----------------------------------------------------
int changesex(char* param) {
char name[1023], sex[1023];
memset(name, '\0', sizeof(name));
memset(sex, '\0', sizeof(sex));
if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, sex) < 2 &&
sscanf(param, "'%[^']' %[^\r\n]", name, sex) < 2 &&
sscanf(param, "%s %[^\r\n]", name, sex) < 2) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte et un sexe svp.\n");
printf("<exemple> sex nomtest Male\n");
ladmin_log("Nombre incorrect de param�tres pour changer le sexe d'un compte (commande 'sex')." RETCODE);
} else {
printf("Please input an account name and a sex.\n");
printf("<example> sex testname Male\n");
ladmin_log("Incomplete parameters to change the sex of an account ('sex' command)." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
sex[0] = toupper(sex[0]);
if (strchr("MF", sex[0]) == NULL) {
if (defaultlanguage == 'F') {
printf("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex);
ladmin_log("Sexe incorrect [%s]. Entrez M ou F svp." RETCODE, sex);
} else {
printf("Illegal gender [%s]. Please input M or F.\n", sex);
ladmin_log("Illegal gender [%s]. Please input M or F." RETCODE, sex);
}
return 103;
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour changer un sexe." RETCODE);
} else {
ladmin_log("Request to login-server to change a sex." RETCODE);
}
WFIFOW(login_fd,0) = 0x793c;
memcpy(WFIFOP(login_fd,2), name, 24);
WFIFOB(login_fd,26) = sex[0];
WFIFOSET(login_fd,27);
bytes_to_read = 1;
return 0;
}
//-------------------------------------------------------------------------
// Sub-function of sub-function changestate, blockaccount or unblockaccount
// Asking to modify the state of an account
//-------------------------------------------------------------------------
int changestatesub(char* name, int state, char* error_message7) {
char error_message[1023]; // need to use, because we can modify error_message7
memset(error_message, '\0', sizeof(error_message));
strncpy(error_message, error_message7, sizeof(error_message)-1);
if ((state < 0 || state > 9) && state != 100) { // Valid values: 0: ok, or value of the 0x006a packet + 1
if (defaultlanguage == 'F') {
printf("Entrez une des statuts suivantes svp:\n");
printf(" 0 = Compte ok 6 = Your Game's EXE file is not the latest version\n");
} else {
printf("Please input one of these states:\n");
printf(" 0 = Account ok 6 = Your Game's EXE file is not the latest version\n");
}
printf(" 1 = Unregistered ID 7 = You are Prohibited to log in until + message\n");
printf(" 2 = Incorrect Password 8 = Server is jammed due to over populated\n");
printf(" 3 = This ID is expired 9 = No MSG\n");
printf(" 4 = Rejected from Server 100 = This ID has been totally erased\n");
printf(" 5 = You have been blocked by the GM Team\n");
if (defaultlanguage == 'F') {
printf("<exemples> state nomtest 5\n");
printf(" state nomtest 7 fin de votre ban\n");
printf(" block <nom compte>\n");
printf(" unblock <nom compte>\n");
ladmin_log("Valeur incorrecte pour le statut d'un compte (commande 'state', 'block' ou 'unblock')." RETCODE);
} else {
printf("<examples> state testname 5\n");
printf(" state testname 7 end of your ban\n");
printf(" block <account name>\n");
printf(" unblock <account name>\n");
ladmin_log("Invalid value for the state of an account ('state', 'block' or 'unblock' command)." RETCODE);
}
return 151;
}
if (verify_accountname(name) == 0) {
return 102;
}
if (state != 7) {
strcpy(error_message, "-");
} else {
if (strlen(error_message) < 1) {
if (defaultlanguage == 'F') {
printf("Message d'erreur trop court. Entrez un message de 1-19 caract�res.\n");
ladmin_log("Message d'erreur trop court. Entrez un message de 1-19 caract�res." RETCODE);
} else {
printf("Error message is too short. Please input a message of 1-19 bytes.\n");
ladmin_log("Error message is too short. Please input a message of 1-19 bytes." RETCODE);
}
return 102;
}
if (strlen(error_message) > 19) {
if (defaultlanguage == 'F') {
printf("Message d'erreur trop long. Entrez un message de 1-19 caract�res.\n");
ladmin_log("Message d'erreur trop long. Entrez un message de 1-19 caract�res." RETCODE);
} else {
printf("Error message is too long. Please input a message of 1-19 bytes.\n");
ladmin_log("Error message is too long. Please input a message of 1-19 bytes." RETCODE);
}
return 102;
}
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour changer un statut." RETCODE);
} else {
ladmin_log("Request to login-server to change a state." RETCODE);
}
WFIFOW(login_fd,0) = 0x7936;
memcpy(WFIFOP(login_fd,2), name, 24);
WFIFOL(login_fd,26) = state;
memcpy(WFIFOP(login_fd,30), error_message, 20);
WFIFOSET(login_fd,50);
bytes_to_read = 1;
return 0;
}
//-------------------------------------------------------
// Sub-function: Asking to modify the state of an account
//-------------------------------------------------------
int changestate(char* param) {
char name[1023], error_message[1023];
int state;
memset(name, '\0', sizeof(name));
memset(error_message, '\0', sizeof(error_message));
if (sscanf(param, "\"%[^\"]\" %d %[^\r\n]", name, &state, error_message) < 2 &&
sscanf(param, "'%[^']' %d %[^\r\n]", name, &state, error_message) < 2 &&
sscanf(param, "%s %d %[^\r\n]", name, &state, error_message) < 2) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte et un statut svp.\n");
printf("<exemples> state nomtest 5\n");
printf(" state nomtest 7 fin de votre ban\n");
printf(" block <nom compte>\n");
printf(" unblock <nom compte>\n");
ladmin_log("Nombre incorrect de param�tres pour changer le statut d'un compte (commande 'state')." RETCODE);
} else {
printf("Please input an account name and a state.\n");
printf("<examples> state testname 5\n");
printf(" state testname 7 end of your ban\n");
printf(" block <account name>\n");
printf(" unblock <account name>\n");
ladmin_log("Incomplete parameters to change the state of an account ('state' command)." RETCODE);
}
return 136;
}
return changestatesub(name, state, error_message);
}
//-------------------------------------------
// Sub-function: Asking to unblock an account
//-------------------------------------------
int unblockaccount(char* param) {
char name[1023];
memset(name, '\0', sizeof(name));
if (strlen(param) == 0 ||
(sscanf(param, "\"%[^\"]\"", name) < 1 &&
sscanf(param, "'%[^']'", name) < 1 &&
sscanf(param, "%[^\r\n]", name) < 1) ||
strlen(name) == 0) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte svp.\n");
printf("<exemples> state nomtest 5\n");
printf(" state nomtest 7 fin de votre ban\n");
printf(" block <nom compte>\n");
printf(" unblock <nom compte>\n");
ladmin_log("Nombre incorrect de param�tres pour changer le statut d'un compte (commande 'unblock')." RETCODE);
} else {
printf("Please input an account name.\n");
printf("<examples> state testname 5\n");
printf(" state testname 7 end of your ban\n");
printf(" block <account name>\n");
printf(" unblock <account name>\n");
ladmin_log("Incomplete parameters to change the state of an account ('unblock' command)." RETCODE);
}
return 136;
}
return changestatesub(name, 0, "-"); // state 0, no error message
}
//-------------------------------------------
// Sub-function: Asking to unblock an account
//-------------------------------------------
int blockaccount(char* param) {
char name[1023];
memset(name, '\0', sizeof(name));
if (strlen(param) == 0 ||
(sscanf(param, "\"%[^\"]\"", name) < 1 &&
sscanf(param, "'%[^']'", name) < 1 &&
sscanf(param, "%[^\r\n]", name) < 1) ||
strlen(name) == 0) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte svp.\n");
printf("<exemples> state nomtest 5\n");
printf(" state nomtest 7 fin de votre ban\n");
printf(" block <nom compte>\n");
printf(" unblock <nom compte>\n");
ladmin_log("Nombre incorrect de param�tres pour changer le statut d'un compte (commande 'block')." RETCODE);
} else {
printf("Please input an account name.\n");
printf("<examples> state testname 5\n");
printf(" state testname 7 end of your ban\n");
printf(" block <account name>\n");
printf(" unblock <account name>\n");
ladmin_log("Incomplete parameters to change the state of an account ('block' command)." RETCODE);
}
return 136;
}
return changestatesub(name, 5, "-"); // state 5, no error message
}
//---------------------------------------------------------------------
// Sub-function: Add/substract time to the validity limit of an account
//---------------------------------------------------------------------
int timeaddaccount(char* param) {
char name[1023], modif[1023];
int year, month, day, hour, minute, second;
char * p_modif;
int value, i;
memset(name, '\0', sizeof(name));
memset(modif, '\0', sizeof(modif));
year = month = day = hour = minute = second = 0;
if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 &&
sscanf(param, "'%[^']' %[^\r\n]", name, modif) < 2 &&
sscanf(param, "%s %[^\r\n]", name, modif) < 2) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte et un modificateur svp.\n");
printf(" <exemple> timeadd nomtest +1m-2mn1s-6y\n");
printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
printf(" et 6 ans dans le m�me temps.\n");
ladmin_log("Nombre incorrect de param�tres pour modifier une date limite d'utilisation (commande 'timeadd')." RETCODE);
} else {
printf("Please input an account name and a modifier.\n");
printf(" <example>: timeadd testname +1m-2mn1s-6y\n");
printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n");
printf(" and 6 years at the same time.\n");
ladmin_log("Incomplete parameters to modify a limit time ('timeadd' command)." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
// lowercase for modif
for (i = 0; modif[i]; i++)
modif[i] = tolower(modif[i]);
p_modif = modif;
while (strlen(p_modif) > 0) {
value = atoi(p_modif);
if (value == 0) {
p_modif++;
} else {
if (p_modif[0] == '-' || p_modif[0] == '+')
p_modif++;
while (strlen(p_modif) > 0 && p_modif[0] >= '0' && p_modif[0] <= '9') {
p_modif++;
}
if (p_modif[0] == 's') {
second = value;
p_modif++;
} else if (p_modif[0] == 'm' && p_modif[1] == 'n') {
minute = value;
p_modif += 2;
} else if (p_modif[0] == 'h') {
hour = value;
p_modif++;
} else if (p_modif[0] == 'd' || p_modif[0] == 'j') {
day = value;
p_modif += 2;
} else if (p_modif[0] == 'm') {
month = value;
p_modif++;
} else if (p_modif[0] == 'y' || p_modif[0] == 'a') {
year = value;
p_modif++;
} else {
p_modif++;
}
}
}
if (defaultlanguage == 'F') {
printf(" ann�e: %d\n", year);
printf(" mois: %d\n", month);
printf(" jour: %d\n", day);
printf(" heure: %d\n", hour);
printf(" minute: %d\n", minute);
printf(" seconde: %d\n", second);
} else {
printf(" year: %d\n", year);
printf(" month: %d\n", month);
printf(" day: %d\n", day);
printf(" hour: %d\n", hour);
printf(" minute: %d\n", minute);
printf(" second: %d\n", second);
}
if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0 && second == 0) {
if (defaultlanguage == 'F') {
printf("Vous devez entrer un ajustement avec cette commande, svp:\n");
printf(" Valeur d'ajustement (-1, 1, +1, etc...)\n");
printf(" El�ment modifi�:\n");
printf(" a ou y: ann�e\n");
printf(" m: mois\n");
printf(" j ou d: jour\n");
printf(" h: heure\n");
printf(" mn: minute\n");
printf(" s: seconde\n");
printf(" <exemple> timeadd nomtest +1m-2mn1s-6y\n");
printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
printf(" et 6 ans dans le m�me temps.\n");
ladmin_log("Aucun ajustement n'est pas un ajustement (commande 'timeadd')." RETCODE);
} else {
printf("Please give an adjustment with this command:\n");
printf(" Adjustment value (-1, 1, +1, etc...)\n");
printf(" Modified element:\n");
printf(" a or y: year\n");
printf(" m: month\n");
printf(" j or d: day\n");
printf(" h: hour\n");
printf(" mn: minute\n");
printf(" s: second\n");
printf(" <example> timeadd testname +1m-2mn1s-6y\n");
printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n");
printf(" and 6 years at the same time.\n");
ladmin_log("No adjustment isn't an adjustment ('timeadd' command)." RETCODE);
}
return 137;
}
if (year > 127 || year < -127) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement d'ann�es correct (de -127 � 127), svp.\n");
ladmin_log("Ajustement de l'ann�e hors norme ('timeadd' command)." RETCODE);
} else {
printf("Please give a correct adjustment for the years (from -127 to 127).\n");
ladmin_log("Abnormal adjustement for the year ('timeadd' command)." RETCODE);
}
return 137;
}
if (month > 255 || month < -255) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement de mois correct (de -255 � 255), svp.\n");
ladmin_log("Ajustement du mois hors norme ('timeadd' command)." RETCODE);
} else {
printf("Please give a correct adjustment for the months (from -255 to 255).\n");
ladmin_log("Abnormal adjustement for the month ('timeadd' command)." RETCODE);
}
return 137;
}
if (day > 32767 || day < -32767) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement de jours correct (de -32767 � 32767), svp.\n");
ladmin_log("Ajustement des jours hors norme ('timeadd' command)." RETCODE);
} else {
printf("Please give a correct adjustment for the days (from -32767 to 32767).\n");
ladmin_log("Abnormal adjustement for the days ('timeadd' command)." RETCODE);
}
return 137;
}
if (hour > 32767 || hour < -32767) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement d'heures correct (de -32767 � 32767), svp.\n");
ladmin_log("Ajustement des heures hors norme ('timeadd' command)." RETCODE);
} else {
printf("Please give a correct adjustment for the hours (from -32767 to 32767).\n");
ladmin_log("Abnormal adjustement for the hours ('timeadd' command)." RETCODE);
}
return 137;
}
if (minute > 32767 || minute < -32767) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement de minutes correct (de -32767 � 32767), svp.\n");
ladmin_log("Ajustement des minutes hors norme ('timeadd' command)." RETCODE);
} else {
printf("Please give a correct adjustment for the minutes (from -32767 to 32767).\n");
ladmin_log("Abnormal adjustement for the minutes ('timeadd' command)." RETCODE);
}
return 137;
}
if (second > 32767 || second < -32767) {
if (defaultlanguage == 'F') {
printf("Entrez un ajustement de secondes correct (de -32767 � 32767), svp.\n");
ladmin_log("Ajustement des secondes hors norme ('timeadd' command)." RETCODE);
} else {
printf("Please give a correct adjustment for the seconds (from -32767 to 32767).\n");
ladmin_log("Abnormal adjustement for the seconds ('timeadd' command)." RETCODE);
}
return 137;
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour modifier une date limite d'utilisation." RETCODE);
} else {
ladmin_log("Request to login-server to modify a time limit." RETCODE);
}
WFIFOW(login_fd,0) = 0x7950;
memcpy(WFIFOP(login_fd,2), name, 24);
WFIFOW(login_fd,26) = (short)year;
WFIFOW(login_fd,28) = (short)month;
WFIFOW(login_fd,30) = (short)day;
WFIFOW(login_fd,32) = (short)hour;
WFIFOW(login_fd,34) = (short)minute;
WFIFOW(login_fd,36) = (short)second;
WFIFOSET(login_fd,38);
bytes_to_read = 1;
return 0;
}
//-------------------------------------------------
// Sub-function: Set a validity limit of an account
//-------------------------------------------------
int timesetaccount(char* param) {
char name[1023], date[1023], time[1023];
int year, month, day, hour, minute, second;
time_t connect_until_time; // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited)
struct tm *tmtime;
memset(name, '\0', sizeof(name));
memset(date, '\0', sizeof(date));
memset(time, '\0', sizeof(time));
year = month = day = hour = minute = second = 0;
connect_until_time = 0;
tmtime = localtime(&connect_until_time); // initialize
if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void
sscanf(param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void
sscanf(param, "%s %s %[^\r\n]", name, date, time) < 2) { // if date = 0, time can be void
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte, une date et une heure svp.\n");
printf("<exemple>: timeset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
printf(" timeset <nom_du_compte> 0 (0 = illimit�)\n");
printf(" Heure par d�faut [hh:mm:ss]: 23:59:59.\n");
ladmin_log("Nombre incorrect de param�tres pour fixer une date limite d'utilisation (commande 'timeset')." RETCODE);
} else {
printf("Please input an account name, a date and a hour.\n");
printf("<example>: timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
printf(" timeset <account_name> 0 (0 = unlimited)\n");
printf(" Default time [hh:mm:ss]: 23:59:59.\n");
ladmin_log("Incomplete parameters to set a limit time ('timeset' command)." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
if (time[0] == '\0')
strcpy(time, "23:59:59");
if (atoi(date) != 0 &&
((sscanf(date, "%d/%d/%d", &year, &month, &day) < 3 &&
sscanf(date, "%d-%d-%d", &year, &month, &day) < 3 &&
sscanf(date, "%d.%d.%d", &year, &month, &day) < 3 &&
sscanf(date, "%d'%d'%d", &year, &month, &day) < 3) ||
sscanf(time, "%d:%d:%d", &hour, &minute, &second) < 3)) {
if (defaultlanguage == 'F') {
printf("Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n");
ladmin_log("Format incorrect pour la date/heure ('timeset' command)." RETCODE);
} else {
printf("Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n");
ladmin_log("Invalid format for the date/time ('timeset' command)." RETCODE);
}
return 102;
}
if (atoi(date) == 0) {
connect_until_time = 0;
} else {
if (year < 70) {
year = year + 100;
}
if (year >= 1900) {
year = year - 1900;
}
if (month < 1 || month > 12) {
if (defaultlanguage == 'F') {
printf("Entrez un mois correct svp (entre 1 et 12).\n");
ladmin_log("Mois incorrect pour la date ('timeset' command)." RETCODE);
} else {
printf("Please give a correct value for the month (from 1 to 12).\n");
ladmin_log("Invalid month for the date ('timeset' command)." RETCODE);
}
return 102;
}
month = month - 1;
if (day < 1 || day > 31) {
if (defaultlanguage == 'F') {
printf("Entrez un jour correct svp (entre 1 et 31).\n");
ladmin_log("Jour incorrect pour la date ('timeset' command)." RETCODE);
} else {
printf("Please give a correct value for the day (from 1 to 31).\n");
ladmin_log("Invalid day for the date ('timeset' command)." RETCODE);
}
return 102;
}
if (((month == 3 || month == 5 || month == 8 || month == 10) && day > 30) ||
(month == 1 && day > 29)) {
if (defaultlanguage == 'F') {
printf("Entrez un jour correct en fonction du mois (%d) svp.\n", month);
ladmin_log("Jour incorrect pour ce mois correspondant ('timeset' command)." RETCODE);
} else {
printf("Please give a correct value for a day of this month (%d).\n", month);
ladmin_log("Invalid day for this month ('timeset' command)." RETCODE);
}
return 102;
}
if (hour < 0 || hour > 23) {
if (defaultlanguage == 'F') {
printf("Entrez une heure correcte svp (entre 0 et 23).\n");
ladmin_log("Heure incorrecte pour l'heure ('timeset' command)." RETCODE);
} else {
printf("Please give a correct value for the hour (from 0 to 23).\n");
ladmin_log("Invalid hour for the time ('timeset' command)." RETCODE);
}
return 102;
}
if (minute < 0 || minute > 59) {
if (defaultlanguage == 'F') {
printf("Entrez des minutes correctes svp (entre 0 et 59).\n");
ladmin_log("Minute incorrecte pour l'heure ('timeset' command)." RETCODE);
} else {
printf("Please give a correct value for the minutes (from 0 to 59).\n");
ladmin_log("Invalid minute for the time ('timeset' command)." RETCODE);
}
return 102;
}
if (second < 0 || second > 59) {
if (defaultlanguage == 'F') {
printf("Entrez des secondes correctes svp (entre 0 et 59).\n");
ladmin_log("Seconde incorrecte pour l'heure ('timeset' command)." RETCODE);
} else {
printf("Please give a correct value for the seconds (from 0 to 59).\n");
ladmin_log("Invalid second for the time ('timeset' command)." RETCODE);
}
return 102;
}
tmtime->tm_year = year;
tmtime->tm_mon = month;
tmtime->tm_mday = day;
tmtime->tm_hour = hour;
tmtime->tm_min = minute;
tmtime->tm_sec = second;
tmtime->tm_isdst = -1; // -1: no winter/summer time modification
connect_until_time = mktime(tmtime);
if (connect_until_time == -1) {
if (defaultlanguage == 'F') {
printf("Date incorrecte.\n");
printf("Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n");
ladmin_log("Date incorrecte. ('timeset' command)." RETCODE);
} else {
printf("Invalid date.\n");
printf("Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n");
ladmin_log("Invalid date. ('timeset' command)." RETCODE);
}
return 102;
}
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour fixer une date limite d'utilisation." RETCODE);
} else {
ladmin_log("Request to login-server to set a time limit." RETCODE);
}
WFIFOW(login_fd,0) = 0x7948;
memcpy(WFIFOP(login_fd,2), name, 24);
WFIFOL(login_fd,26) = (int)connect_until_time;
WFIFOSET(login_fd,30);
bytes_to_read = 1;
return 0;
}
//------------------------------------------------------------------------------
// Sub-function: Asking to displaying information about an account (by its name)
//------------------------------------------------------------------------------
int whoaccount(char* param) {
char name[1023];
memset(name, '\0', sizeof(name));
if (strlen(param) == 0 ||
(sscanf(param, "\"%[^\"]\"", name) < 1 &&
sscanf(param, "'%[^']'", name) < 1 &&
sscanf(param, "%[^\r\n]", name) < 1) ||
strlen(name) == 0) {
if (defaultlanguage == 'F') {
printf("Entrez un nom de compte svp.\n");
printf("<exemple> who nomtest\n");
ladmin_log("Aucun nom n'a �t� donn� pour trouver le compte." RETCODE);
} else {
printf("Please input an account name.\n");
printf("<example> who testname\n");
ladmin_log("No name was given to found the account." RETCODE);
}
return 136;
}
if (verify_accountname(name) == 0) {
return 102;
}
if (defaultlanguage == 'F') {
ladmin_log("Envoi d'un requ�te au serveur de logins pour obtenir le information d'un compte (par le nom)." RETCODE);
} else {
ladmin_log("Request to login-server to obtain information about an account (by its name)." RETCODE);
}
WFIFOW(login_fd,0) = 0x7952;
memcpy(WFIFOP(login_fd,2), name, 24);
WFIFOSET(login_fd,26);
bytes_to_read = 1;
return 0;
}
//--------------------------------------------------------
// Sub-function: Asking of the version of the login-server
//--------------------------------------------------------
int checkloginversion() {
if (defaultlanguage == 'F')
ladmin_log("Envoi d'un requ�te au serveur de logins pour obtenir sa version." RETCODE);
else
ladmin_log("Request to login-server to obtain its version." RETCODE);
WFIFOW(login_fd,0) = 0x7530;
WFIFOSET(login_fd,2);
bytes_to_read = 1;
return 0;
}
//---------------------------------------------
// Prompt function
// this function wait until user type a command
// and analyse the command.
//---------------------------------------------
int prompt() {
int i, j;
char buf[1024];
char *p;
// while we don't wait new packets
while (bytes_to_read == 0) {
// for help with the console colors look here:
// http://www.edoceo.com/liberum/?doc=printf-with-color
// some code explanation (used here):
// \033[2J : clear screen and go up/left (0, 0 position)
// \033[K : clear line from actual position to end of the line
// \033[0m : reset color parameter
// \033[1m : use bold for font
printf("\n");
if (defaultlanguage == 'F')
printf("\033[32mPour afficher les commandes, tapez 'Entr�e'.\033[0m\n");
else
printf("\033[32mTo list the commands, type 'enter'.\033[0m\n");
printf("\033[0;36mLadmin-> \033[0m");
printf("\033[1m");
fflush(stdout);
// get command and parameter
memset(buf, '\0', sizeof(buf));
fflush(stdin);
fgets(buf, 1023, stdin);
buf[1023] = '\0';
printf("\033[0m");
fflush(stdout);
// remove final \n
if((p = strrchr(buf, '\n')) != NULL)
p[0] = '\0';
// remove all control char
for (i = 0; buf[i]; i++)
if (buf[i] < 32) {
// remove cursor control.
if (buf[i] == 27 && buf[i+1] == '[' &&
(buf[i+2] == 'H' || // home position (cursor)
buf[i+2] == 'J' || // clear screen
buf[i+2] == 'A' || // up 1 line
buf[i+2] == 'B' || // down 1 line
buf[i+2] == 'C' || // right 1 position
buf[i+2] == 'D' || // left 1 position
buf[i+2] == 'G')) { // center cursor (windows)
for (j = i; buf[j]; j++)
buf[j] = buf[j+3];
} else if (buf[i] == 27 && buf[i+1] == '[' && buf[i+2] == '2' && buf[i+3] == 'J') { // clear screen
for (j = i; buf[j]; j++)
buf[j] = buf[j+4];
} else if (buf[i] == 27 && buf[i+1] == '[' && buf[i+3] == '~' &&
(buf[i+2] == '1' || // home (windows)
buf[i+2] == '2' || // insert (windows)
buf[i+2] == '3' || // del (windows)
buf[i+2] == '4' || // end (windows)
buf[i+2] == '5' || // pgup (windows)
buf[i+2] == '6')) { // pgdown (windows)
for (j = i; buf[j]; j++)
buf[j] = buf[j+4];
} else {
// remove other control char.
for (j = i; buf[j]; j++)
buf[j] = buf[j+1];
}
i--;
}
// extract command name and parameters
memset(command, '\0', sizeof(command));
memset(parameters, '\0', sizeof(parameters));
sscanf(buf, "%1023s %[^\n]", command, parameters);
command[1023] = '\0';
parameters[1023] = '\0';
// lowercase for command line
for (i = 0; command[i]; i++)
command[i] = tolower(command[i]);
if (command[0] == '?' || strlen(command) == 0) {
if (defaultlanguage == 'F') {
strcpy(buf, "aide");
strcpy(command, "aide");
} else {
strcpy(buf, "help");
strcpy(command, "help");
}
}
// Analyse of the command
check_command(command); // give complete name to the command
if (strlen(parameters) == 0) {
if (defaultlanguage == 'F') {
ladmin_log("Commande: '%s' (sans param�tre)" RETCODE, command, parameters);
} else {
ladmin_log("Command: '%s' (without parameters)" RETCODE, command, parameters);
}
} else {
if (defaultlanguage == 'F') {
ladmin_log("Commande: '%s', param�tres: '%s'" RETCODE, command, parameters);
} else {
ladmin_log("Command: '%s', parameters: '%s'" RETCODE, command, parameters);
}
}
// Analyse of the command
// help
if (strcmp(command, "aide") == 0) {
display_help(parameters, 1); // 1: french
} else if (strcmp(command, "help") == 0 ) {
display_help(parameters, 0); // 0: english
// general commands
} else if (strcmp(command, "add") == 0) {
addaccount(parameters, 0); // 0: no email
} else if (strcmp(command, "ban") == 0) {
banaccount(parameters);
} else if (strcmp(command, "banadd") == 0) {
banaddaccount(parameters);
} else if (strcmp(command, "banset") == 0) {
bansetaccount(parameters);
} else if (strcmp(command, "block") == 0) {
blockaccount(parameters);
} else if (strcmp(command, "check") == 0) {
checkaccount(parameters);
} else if (strcmp(command, "create") == 0) {
addaccount(parameters, 1); // 1: with email
} else if (strcmp(command, "delete") == 0) {
delaccount(parameters);
} else if (strcmp(command, "email") == 0) {
changeemail(parameters);
} else if (strcmp(command, "getcount") == 0) {
getlogincount();
} else if (strcmp(command, "gm") == 0) {
changegmlevel(parameters);
} else if (strcmp(command, "id") == 0) {
idaccount(parameters);
} else if (strcmp(command, "info") == 0) {
infoaccount(atoi(parameters));
} else if (strcmp(command, "kami") == 0) {
sendbroadcast(0, parameters); // flag for normal
} else if (strcmp(command, "kamib") == 0) {
sendbroadcast(0x10, parameters); // flag for blue
} else if (strcmp(command, "language") == 0) {
changelanguage(parameters);
} else if (strcmp(command, "list") == 0) {
listaccount(parameters, 0); // 0: to list all
} else if (strcmp(command, "listban") == 0) {
listaccount(parameters, 3); // 3: to list only accounts with state or bannished
} else if (strcmp(command, "listgm") == 0) {
listaccount(parameters, 1); // 1: to list only GM
} else if (strcmp(command, "listok") == 0) {
listaccount(parameters, 4); // 4: to list only accounts without state and not bannished
} else if (strcmp(command, "memo") == 0) {
changememo(parameters);
} else if (strcmp(command, "name") == 0) {
nameaccount(atoi(parameters));
} else if (strcmp(command, "password") == 0) {
changepasswd(parameters);
} else if (strcmp(command, "reloadgm") == 0) {
reloadGM();
} else if (strcmp(command, "search") == 0) { // no regex in C version
listaccount(parameters, 2); // 2: to list with pattern
} else if (strcmp(command, "sex") == 0) {
changesex(parameters);
} else if (strcmp(command, "state") == 0) {
changestate(parameters);
} else if (strcmp(command, "timeadd") == 0) {
timeaddaccount(parameters);
} else if (strcmp(command, "timeset") == 0) {
timesetaccount(parameters);
} else if (strcmp(command, "unban") == 0) {
unbanaccount(parameters);
} else if (strcmp(command, "unblock") == 0) {
unblockaccount(parameters);
} else if (strcmp(command, "version") == 0) {
checkloginversion();
} else if (strcmp(command, "who") == 0) {
whoaccount(parameters);
// quit
} else if (strcmp(command, "quit") == 0 ||
strcmp(command, "exit") == 0 ||
strcmp(command, "end") == 0) {
if (defaultlanguage == 'F') {
printf("Au revoir.\n");
} else {
printf("Bye.\n");
}
exit(0);
// unknown command
} else {
if (defaultlanguage == 'F') {
printf("Commande inconnue [%s].\n", buf);
ladmin_log("Commande inconnue [%s]." RETCODE, buf);
} else {
printf("Unknown command [%s].\n", buf);
ladmin_log("Unknown command [%s]." RETCODE, buf);
}
}
}
return 0;
}
//-------------------------------------------------------------
// Function: Parse receiving informations from the login-server
//-------------------------------------------------------------
int parse_fromlogin(int fd) {
struct char_session_data *sd;
if (session[fd]->eof) {
if (defaultlanguage == 'F') {
printf("Impossible de se connecter au serveur de login [%s:%d] !\n", loginserverip, loginserverport);
ladmin_log("Impossible de se connecter au serveur de login [%s:%d] !" RETCODE, loginserverip, loginserverport);
} else {
printf("Impossible to have a connection with the login-server [%s:%d] !\n", loginserverip, loginserverport);
ladmin_log("Impossible to have a connection with the login-server [%s:%d] !" RETCODE, loginserverip, loginserverport);
}
close(fd);
delete_session(fd);
exit (0);
}
// printf("parse_fromlogin : %d %d %d\n", fd, RFIFOREST(fd), RFIFOW(fd,0));
sd = session[fd]->session_data;
while(RFIFOREST(fd) >= 2) {
switch(RFIFOW(fd,0)) {
case 0x7919: // answer of a connection request
if (RFIFOREST(fd) < 3)
return 0;
if (RFIFOB(fd,2) != 0) {
if (defaultlanguage == 'F') {
printf("Erreur de login:\n");
printf(" - mot de passe incorrect,\n");
printf(" - syst�me d'administration non activ�, ou\n");
printf(" - IP non autoris�e.\n");
ladmin_log("Erreur de login: mot de passe incorrect, syst�me d'administration non activ�, ou IP non autoris�e." RETCODE);
} else {
printf("Error at login:\n");
printf(" - incorrect password,\n");
printf(" - administration system not activated, or\n");
printf(" - unauthorised IP.\n");
ladmin_log("Error at login: incorrect password, administration system not activated, or unauthorised IP." RETCODE);
}
session[fd]->eof = 1;
//bytes_to_read = 1; // not stop at prompt
} else {
if (defaultlanguage == 'F') {
printf("Connexion �tablie.\n");
ladmin_log("Connexion �tablie." RETCODE);
printf("Lecture de la version du serveur de login...\n");
ladmin_log("Lecture de la version du serveur de login..." RETCODE);
} else {
printf("Established connection.\n");
ladmin_log("Established connection." RETCODE);
printf("Reading of the version of the login-server...\n");
ladmin_log("Reading of the version of the login-server..." RETCODE);
}
//bytes_to_read = 1; // unchanged
checkloginversion();
}
RFIFOSKIP(fd,3);
break;
#ifdef PASSWORDENC
case 0x01dc: // answer of a coding key request
if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2))
return 0;
{
char md5str[64] = "", md5bin[32], md5key[RFIFOW(fd,2) - 4 + 1];
memcpy(md5key, RFIFOP(fd,4), RFIFOW(fd,2) - 4);
md5key[sizeof(md5key)-1] = '0';
if (passenc == 1) {
strncpy(md5str, RFIFOP(fd,4), RFIFOW(fd,2) - 4);
strcat(md5str, loginserveradminpassword);
} else if (passenc == 2) {
strncpy(md5str, loginserveradminpassword, sizeof(loginserveradminpassword));
strcat(md5str, RFIFOP(fd,4));
}
MD5_String2binary(md5str, md5bin);
WFIFOW(login_fd,0) = 0x7918; // Request for administation login (encrypted password)
WFIFOW(login_fd,2) = passenc; // Encrypted type
memcpy(WFIFOP(login_fd,4), md5bin, 16);
WFIFOSET(login_fd,20);
if (defaultlanguage == 'F') {
printf("R�ception de la clef MD5.\n");
ladmin_log("R�ception de la clef MD5." RETCODE);
printf("Envoi du mot de passe crypt�...\n");
ladmin_log("Envoi du mot de passe crypt�..." RETCODE);
} else {
printf("Receiving of the MD5 key.\n");
ladmin_log("Receiving of the MD5 key." RETCODE);
printf("Sending of the encrypted password...\n");
ladmin_log("Sending of the encrypted password..." RETCODE);
}
}
bytes_to_read = 1;
RFIFOSKIP(fd,RFIFOW(fd,2));
break;
#endif
case 0x7531: // Displaying of the version of the login-server
if (RFIFOREST(fd) < 10)
return 0;
printf(" Login-Server [%s:%d]\n", loginserverip, loginserverport);
if (((int)RFIFOB(login_fd,5)) == 0) {
printf(" eAthena version stable-%d.%d", (int)RFIFOB(login_fd,2), (int)RFIFOB(login_fd,3));
} else {
printf(" eAthena version dev-%d.%d", (int)RFIFOB(login_fd,2), (int)RFIFOB(login_fd,3));
}
if (((int)RFIFOB(login_fd,4)) == 0)
printf(" revision %d", (int)RFIFOB(login_fd,4));
if (((int)RFIFOB(login_fd,6)) == 0)
printf("%d.\n", RFIFOW(login_fd,8));
else
printf("-mod%d.\n", RFIFOW(login_fd,8));
bytes_to_read = 0;
RFIFOSKIP(fd,10);
break;
case 0x7921: // Displaying of the list of accounts
if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2))
return 0;
if (RFIFOW(fd,2) < 5) {
if (defaultlanguage == 'F') {
ladmin_log(" R�ception d'une liste des comptes vide." RETCODE);
if (list_count == 0)
printf("Aucun compte trouv�.\n");
else if (list_count == 1)
printf("1 compte trouv�.\n");
else
printf("%d comptes trouv�s.\n", list_count);
} else {
ladmin_log(" Receiving of a void accounts list." RETCODE);
if (list_count == 0)
printf("No account found.\n");
else if (list_count == 1)
printf("1 account found.\n");
else
printf("%d accounts found.\n", list_count);
}
bytes_to_read = 0;
} else {
int i;
if (defaultlanguage == 'F')
ladmin_log(" R�ception d'une liste des comptes." RETCODE);
else
ladmin_log(" Receiving of a accounts list." RETCODE);
for(i = 4; i < RFIFOW(fd,2); i += 38) {
int j;
char userid[24];
char lower_userid[24];
memcpy(userid, RFIFOP(fd,i + 5), sizeof(userid));
userid[sizeof(userid)-1] = '\0';
memset(lower_userid, '\0', sizeof(lower_userid));
for (j = 0; userid[j]; j++)
lower_userid[j] = tolower(userid[j]);
list_first = RFIFOL(fd,i) + 1;
// here are checks...
if (list_type == 0 ||
(list_type == 1 && RFIFOB(fd,i+4) > 0) ||
(list_type == 2 && strstr(lower_userid, parameters) != NULL) ||
(list_type == 3 && RFIFOL(fd,i+34) != 0) ||
(list_type == 4 && RFIFOL(fd,i+34) == 0)) {
printf("%10d ", RFIFOL(fd,i));
if (RFIFOB(fd,i+4) == 0)
printf(" ");
else
printf("%2d ", (int)RFIFOB(fd,i+4));
printf("%-24s", userid);
if (defaultlanguage == 'F') {
if (RFIFOB(fd,i+29) == 0)
printf("%-5s ", "Femme");
else if (RFIFOB(fd,i+29) == 1)
printf("%-5s ", "Male");
else
printf("%-5s ", "Servr");
} else {
if (RFIFOB(fd,i+29) == 0)
printf("%-5s ", "Femal");
else if (RFIFOB(fd,i+29) == 1)
printf("%-5s ", "Male");
else
printf("%-5s ", "Servr");
}
printf("%6d ", RFIFOL(fd,i+30));
switch(RFIFOL(fd,i+34)) {
case 0:
if (defaultlanguage == 'F')
printf("%-27s\n", "Compte Ok");
else
printf("%-27s\n", "Account OK");
break;
case 1:
printf("%-27s\n", "Unregistered ID");
break;
case 2:
printf("%-27s\n", "Incorrect Password");
break;
case 3:
printf("%-27s\n", "This ID is expired");
break;
case 4:
printf("%-27s\n", "Rejected from Server");
break;
case 5:
printf("%-27s\n", "Blocked by the GM Team"); // You have been blocked by the GM Team
break;
case 6:
printf("%-27s\n", "Your EXE file is too old"); // Your Game's EXE file is not the latest version
break;
case 7:
printf("%-27s\n", "Banishement or");
printf(" Prohibited to login until...\n"); // You are Prohibited to log in until %s
break;
case 8:
printf("%-27s\n", "Server is over populated");
break;
case 9:
printf("%-27s\n", "No MSG");
break;
default: // 100
printf("%-27s\n", "This ID is totally erased"); // This ID has been totally erased
break;
}
list_count++;
}
}
// asking of the following acounts
if (defaultlanguage == 'F')
ladmin_log("Envoi d'un requ�te au serveur de logins pour obtenir la liste des comptes de %d � %d (compl�ment)." RETCODE, list_first, list_last);
else
ladmin_log("Request to login-server to obtain the list of accounts from %d to %d (complement)." RETCODE, list_first, list_last);
WFIFOW(login_fd,0) = 0x7920;
WFIFOL(login_fd,2) = list_first;
WFIFOL(login_fd,6) = list_last;
WFIFOSET(login_fd,10);
bytes_to_read = 1;
}
RFIFOSKIP(fd,RFIFOW(fd,2));
break;
case 0x7931: // Answer of login-server about an account creation
if (RFIFOREST(fd) < 30)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec � la cr�ation du compte [%s]. Un compte identique existe d�j�.\n", RFIFOP(fd,6));
ladmin_log("Echec � la cr�ation du compte [%s]. Un compte identique existe d�j�." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] creation failed. Same account already exists.\n", RFIFOP(fd,6));
ladmin_log("Account [%s] creation failed. Same account already exists." RETCODE, RFIFOP(fd,6));
}
} else {
if (defaultlanguage == 'F') {
printf("Compte [%s] cr�� avec succ�s [id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Compte [%s] cr�� avec succ�s [id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("Account [%s] is successfully created [id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Account [%s] is successfully created [id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,30);
break;
case 0x7933: // Answer of login-server about an account deletion
if (RFIFOREST(fd) < 30)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec de la suppression du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
ladmin_log("Echec de la suppression du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] deletion failed. Account doesn't exist.\n", RFIFOP(fd,6));
ladmin_log("Account [%s] deletion failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
}
} else {
if (defaultlanguage == 'F') {
printf("Compte [%s][id: %d] SUPPRIME avec succ�s.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Compte [%s][id: %d] SUPPRIME avec succ�s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("Account [%s][id: %d] is successfully DELETED.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Account [%s][id: %d] is successfully DELETED." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,30);
break;
case 0x7935: // answer of the change of an account password
if (RFIFOREST(fd) < 30)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec de la modification du mot de passe du compte [%s].\n", RFIFOP(fd,6));
printf("Le compte [%s] n'existe pas.\n", RFIFOP(fd,6));
ladmin_log("Echec de la modification du mot de passe du compte. Le compte [%s] n'existe pas." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] password changing failed.\n", RFIFOP(fd,6));
printf("Account [%s] doesn't exist.\n", RFIFOP(fd,6));
ladmin_log("Account password changing failed. The compte [%s] doesn't exist." RETCODE, RFIFOP(fd,6));
}
} else {
if (defaultlanguage == 'F') {
printf("Modification du mot de passe du compte [%s][id: %d] r�ussie.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Modification du mot de passe du compte [%s][id: %d] r�ussie." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("Account [%s][id: %d] password successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Account [%s][id: %d] password successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,30);
break;
case 0x7937: // answer of the change of an account state
if (RFIFOREST(fd) < 34)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec du changement du statut du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
ladmin_log("Echec du changement du statut du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] state changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
ladmin_log("Account [%s] state changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
}
} else {
char tmpstr[256];
if (defaultlanguage == 'F') {
sprintf(tmpstr, "Statut du compte [%s] chang� avec succ�s en [", RFIFOP(fd,6));
} else {
sprintf(tmpstr, "Account [%s] state successfully changed in [", RFIFOP(fd,6));
}
switch(RFIFOL(fd,30)) {
case 0:
if (defaultlanguage == 'F')
strcat(tmpstr, "0: Compte Ok");
else
strcat(tmpstr, "0: Account OK");
break;
case 1:
strcat(tmpstr, "1: Unregistered ID");
break;
case 2:
strcat(tmpstr, "2: Incorrect Password");
break;
case 3:
strcat(tmpstr, "3: This ID is expired");
break;
case 4:
strcat(tmpstr, "4: Rejected from Server");
break;
case 5:
strcat(tmpstr, "5: You have been blocked by the GM Team");
break;
case 6:
strcat(tmpstr, "6: [Your Game's EXE file is not the latest version");
break;
case 7:
strcat(tmpstr, "7: You are Prohibited to log in until...");
break;
case 8:
strcat(tmpstr, "8: Server is jammed due to over populated");
break;
case 9:
strcat(tmpstr, "9: No MSG");
break;
default: // 100
strcat(tmpstr, "100: This ID is totally erased");
break;
}
strcat(tmpstr, "]");
printf("%s\n", tmpstr);
ladmin_log("%s%s", tmpstr, RETCODE);
}
bytes_to_read = 0;
RFIFOSKIP(fd,34);
break;
case 0x7939: // answer of the number of online players
if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2))
return 0;
{
// Get length of the received packet
int i;
char name[20];
if (defaultlanguage == 'F') {
ladmin_log(" R�ception du nombre de joueurs en ligne." RETCODE);
} else {
ladmin_log(" Receiving of the number of online players." RETCODE);
}
// Read information of the servers
if (RFIFOW(fd,2) < 5) {
if (defaultlanguage == 'F') {
printf(" Aucun serveur n'est connect� au login serveur.\n");
} else {
printf(" No server is connected to the login-server.\n");
}
} else {
if (defaultlanguage == 'F') {
printf(" Nombre de joueurs en ligne (serveur: nb):\n");
} else {
printf(" Number of online players (server: number).\n");
}
// Displaying of result
for(i = 4; i < RFIFOW(fd,2); i += 32) {
memcpy(name, RFIFOP(fd,i+6), sizeof(name));
name[sizeof(name) - 1] = '\0';
printf(" %-20s : %5d\n", name, RFIFOW(fd,i+26));
}
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,RFIFOW(fd,2));
break;
case 0x793b: // answer of the check of a password
if (RFIFOREST(fd) < 30)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Le compte [%s] n'existe pas ou le mot de passe est incorrect.\n", RFIFOP(fd,6));
ladmin_log("Le compte [%s] n'existe pas ou le mot de passe est incorrect." RETCODE, RFIFOP(fd,6));
} else {
printf("The account [%s] doesn't exist or the password is incorrect.\n", RFIFOP(fd,6));
ladmin_log("The account [%s] doesn't exist or the password is incorrect." RETCODE, RFIFOP(fd,6));
}
} else {
if (defaultlanguage == 'F') {
printf("Le mot de passe donn� correspond bien au compte [%s][id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Le mot de passe donn� correspond bien au compte [%s][id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("The proposed password is correct for the account [%s][id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("The proposed password is correct for the account [%s][id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,30);
break;
case 0x793d: // answer of the change of an account sex
if (RFIFOREST(fd) < 30)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec de la modification du sexe du compte [%s].\n", RFIFOP(fd,6));
printf("Le compte [%s] n'existe pas ou le sexe est d�j� celui demand�.\n", RFIFOP(fd,6));
ladmin_log("Echec de la modification du sexe du compte. Le compte [%s] n'existe pas ou le sexe est d�j� celui demand�." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] sex changing failed.\n", RFIFOP(fd,6));
printf("Account [%s] doesn't exist or the sex is already the good sex.\n", RFIFOP(fd,6));
ladmin_log("Account sex changing failed. The compte [%s] doesn't exist or the sex is already the good sex." RETCODE, RFIFOP(fd,6));
}
} else {
if (defaultlanguage == 'F') {
printf("Sexe du compte [%s][id: %d] chang� avec succ�s.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Sexe du compte [%s][id: %d] chang� avec succ�s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("Account [%s][id: %d] sex successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Account [%s][id: %d] sex successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,30);
break;
case 0x793f: // answer of the change of an account GM level
if (RFIFOREST(fd) < 30)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec de la modification du niveau de GM du compte [%s].\n", RFIFOP(fd,6));
printf("Le compte [%s] n'existe pas, le niveau de GM est d�j� celui demand�\n", RFIFOP(fd,6));
printf("ou il est impossible de modifier le fichier des comptes GM.\n");
ladmin_log("Echec de la modification du niveau de GM du compte. Le compte [%s] n'existe pas, le niveau de GM est d�j� celui demand� ou il est impossible de modifier le fichier des comptes GM." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] GM level changing failed.\n", RFIFOP(fd,6));
printf("Account [%s] doesn't exist, the GM level is already the good GM level\n", RFIFOP(fd,6));
printf("or it's impossible to modify the GM accounts file.\n");
ladmin_log("Account GM level changing failed. The compte [%s] doesn't exist, the GM level is already the good sex or it's impossible to modify the GM accounts file." RETCODE, RFIFOP(fd,6));
}
} else {
if (defaultlanguage == 'F') {
printf("Niveau de GM du compte [%s][id: %d] chang� avec succ�s.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Niveau de GM du compte [%s][id: %d] chang� avec succ�s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("Account [%s][id: %d] GM level successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Account [%s][id: %d] GM level successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,30);
break;
case 0x7941: // answer of the change of an account email
if (RFIFOREST(fd) < 30)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec de la modification de l'e-mail du compte [%s].\n", RFIFOP(fd,6));
printf("Le compte [%s] n'existe pas.\n", RFIFOP(fd,6));
ladmin_log("Echec de la modification de l'e-mail du compte. Le compte [%s] n'existe pas." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] e-mail changing failed.\n", RFIFOP(fd,6));
printf("Account [%s] doesn't exist.\n", RFIFOP(fd,6));
ladmin_log("Account e-mail changing failed. The compte [%s] doesn't exist." RETCODE, RFIFOP(fd,6));
}
} else {
if (defaultlanguage == 'F') {
printf("Modification de l'e-mail du compte [%s][id: %d] r�ussie.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Modification de l'e-mail du compte [%s][id: %d] r�ussie." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("Account [%s][id: %d] e-mail successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Account [%s][id: %d] e-mail successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,30);
break;
case 0x7943: // answer of the change of an account memo
if (RFIFOREST(fd) < 30)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec du changement du m�mo du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
ladmin_log("Echec du changement du m�mo du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] memo changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
ladmin_log("Account [%s] memo changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
}
} else {
if (defaultlanguage == 'F') {
printf("M�mo du compte [%s][id: %d] chang� avec succ�s.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("M�mo du compte [%s][id: %d] chang� avec succ�s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("Account [%s][id: %d] memo successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Account [%s][id: %d] memo successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,30);
break;
case 0x7945: // answer of an account id search
if (RFIFOREST(fd) < 30)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
ladmin_log("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
} else {
printf("Unable to find the account [%s] id. Account doesn't exist.\n", RFIFOP(fd,6));
ladmin_log("Unable to find the account [%s] id. Account doesn't exist." RETCODE, RFIFOP(fd,6));
}
} else {
if (defaultlanguage == 'F') {
printf("Le compte [%s] a pour id: %d.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Le compte [%s] a pour id: %d." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("The account [%s] have the id: %d.\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("The account [%s] have the id: %d." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,30);
break;
case 0x7947: // answer of an account name search
if (RFIFOREST(fd) < 30)
return 0;
if (strcmp(RFIFOP(fd,6), "") == 0) {
if (defaultlanguage == 'F') {
printf("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas.\n", RFIFOL(fd,2));
ladmin_log("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas." RETCODE, RFIFOL(fd,2));
} else {
printf("Unable to find the account [%d] name. Account doesn't exist.\n", RFIFOL(fd,2));
ladmin_log("Unable to find the account [%d] name. Account doesn't exist." RETCODE, RFIFOL(fd,2));
}
} else {
if (defaultlanguage == 'F') {
printf("Le compte [id: %d] a pour nom: %s.\n", RFIFOL(fd,2), RFIFOP(fd,6));
ladmin_log("Le compte [id: %d] a pour nom: %s." RETCODE, RFIFOL(fd,2), RFIFOP(fd,6));
} else {
printf("The account [id: %d] have the name: %s.\n", RFIFOL(fd,2), RFIFOP(fd,6));
ladmin_log("The account [id: %d] have the name: %s." RETCODE, RFIFOL(fd,2), RFIFOP(fd,6));
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,30);
break;
case 0x7949: // answer of an account validity limit set
if (RFIFOREST(fd) < 34)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec du changement de la validit� du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
ladmin_log("Echec du changement de la validit� du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
ladmin_log("Account [%s] validity limit changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
}
} else {
time_t timestamp = RFIFOL(fd,30);
if (timestamp == 0) {
if (defaultlanguage == 'F') {
printf("Limite de validit� du compte [%s][id: %d] chang�e avec succ�s en [illimit�].\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Limite de validit� du compte [%s][id: %d] chang�e avec succ�s en [illimit�]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited].\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
} else {
char tmpstr[128];
strftime(tmpstr, 24, date_format, localtime(×tamp));
if (defaultlanguage == 'F') {
printf("Limite de validit� du compte [%s][id: %d] chang�e avec succ�s pour �tre jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
ladmin_log("Limite de validit� du compte [%s][id: %d] chang�e avec succ�s pour �tre jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
} else {
printf("Validity Limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
ladmin_log("Validity Limit of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
}
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,34);
break;
case 0x794b: // answer of an account ban set
if (RFIFOREST(fd) < 34)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
ladmin_log("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
ladmin_log("Account [%s] final date of banishment changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
}
} else {
time_t timestamp = RFIFOL(fd,30);
if (timestamp == 0) {
if (defaultlanguage == 'F') {
printf("Date finale de banissement du compte [%s][id: %d] chang�e avec succ�s en [d�-bannie].\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Date finale de banissement du compte [%s][id: %d] chang�e avec succ�s en [d�-bannie]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
} else {
char tmpstr[128];
strftime(tmpstr, 24, date_format, localtime(×tamp));
if (defaultlanguage == 'F') {
printf("Date finale de banissement du compte [%s][id: %d] chang�e avec succ�s pour �tre jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
ladmin_log("Date finale de banissement du compte [%s][id: %d] chang�e avec succ�s pour �tre jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
} else {
printf("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
}
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,34);
break;
case 0x794d: // answer of an account ban date/time changing
if (RFIFOREST(fd) < 34)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
ladmin_log("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
ladmin_log("Account [%s] final date of banishment changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
}
} else {
time_t timestamp = RFIFOL(fd,30);
if (timestamp == 0) {
if (defaultlanguage == 'F') {
printf("Date finale de banissement du compte [%s][id: %d] chang�e avec succ�s en [d�-bannie].\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Date finale de banissement du compte [%s][id: %d] chang�e avec succ�s en [d�-bannie]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), RFIFOL(fd,2));
ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
} else {
char tmpstr[128];
strftime(tmpstr, 24, date_format, localtime(×tamp));
if (defaultlanguage == 'F') {
printf("Date finale de banissement du compte [%s][id: %d] chang�e avec succ�s pour �tre jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
ladmin_log("Date finale de banissement du compte [%s][id: %d] chang�e avec succ�s pour �tre jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
} else {
printf("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
}
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,34);
break;
case 0x794f: // answer of a broadcast
if (RFIFOREST(fd) < 4)
return 0;
if (RFIFOW(fd,2) == (unsigned short)-1) {
if (defaultlanguage == 'F') {
printf("Echec de l'envoi du message. Aucun server de char en ligne.\n");
ladmin_log("Echec de l'envoi du message. Aucun server de char en ligne." RETCODE);
} else {
printf("Message sending failed. No online char-server.\n");
ladmin_log("Message sending failed. No online char-server." RETCODE);
}
} else {
if (defaultlanguage == 'F') {
printf("Message transmis au server de logins avec succ�s.\n");
ladmin_log("Message transmis au server de logins avec succ�s." RETCODE);
} else {
printf("Message successfully sended to login-server.\n");
ladmin_log("Message successfully sended to login-server." RETCODE);
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,4);
break;
case 0x7951: // answer of an account validity limit changing
if (RFIFOREST(fd) < 34)
return 0;
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Echec du changement de la validit� du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6));
ladmin_log("Echec du changement de la validit� du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6));
} else {
printf("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6));
ladmin_log("Account [%s] validity limit changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6));
}
} else {
time_t timestamp = RFIFOL(fd,30);
if (timestamp == 0) {
if (defaultlanguage == 'F') {
printf("Limite de validit� du compte [%s][id: %d] inchang�e.\n", RFIFOP(fd,6), RFIFOL(fd,2));
printf("Le compte a une validit� illimit�e ou\n");
printf("la modification est impossible avec les ajustements demand�s.\n");
ladmin_log("Limite de validit� du compte [%s][id: %d] inchang�e. Le compte a une validit� illimit�e ou la modification est impossible avec les ajustements demand�s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
} else {
printf("Validity limit of the account [%s][id: %d] unchanged.\n", RFIFOP(fd,6), RFIFOL(fd,2));
printf("The account have an unlimited validity limit or\n");
printf("the changing is impossible with the proposed adjustments.\n");
ladmin_log("Validity limit of the account [%s][id: %d] unchanged. The account have an unlimited validity limit or the changing is impossible with the proposed adjustments." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2));
}
} else {
char tmpstr[128];
strftime(tmpstr, 24, date_format, localtime(×tamp));
if (defaultlanguage == 'F') {
printf("Limite de validit� du compte [%s][id: %d] chang�e avec succ�s pour �tre jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
ladmin_log("Limite de validit� du compte [%s][id: %d] chang�e avec succ�s pour �tre jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
} else {
printf("Validity limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
ladmin_log("Validity limit of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr);
}
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,34);
break;
case 0x7953: // answer of a request about informations of an account (by account name/id)
if (RFIFOREST(fd) < 150 || RFIFOREST(fd) < (150 + RFIFOW(fd,148)))
return 0;
{
char userid[24], error_message[20], lastlogin[24], last_ip[16], email[40], memo[255];
time_t ban_until_time; // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban)
time_t connect_until_time; // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited)
memcpy(userid, RFIFOP(fd,7), sizeof(userid));
userid[sizeof(userid)-1] = '\0';
memcpy(error_message, RFIFOP(fd,40), sizeof(error_message));
error_message[sizeof(error_message)-1] = '\0';
memcpy(lastlogin, RFIFOP(fd,60), sizeof(lastlogin));
lastlogin[sizeof(lastlogin)-1] = '\0';
memcpy(last_ip, RFIFOP(fd,84), sizeof(last_ip));
last_ip[sizeof(last_ip)-1] = '\0';
memcpy(email, RFIFOP(fd,100), sizeof(email));
email[sizeof(email)-1] = '\0';
connect_until_time = (time_t)RFIFOL(fd,140);
ban_until_time = (time_t)RFIFOL(fd,144);
memset(memo, '\0', sizeof(memo));
strncpy(memo, RFIFOP(fd,150), RFIFOW(fd,148));
if (RFIFOL(fd,2) == -1) {
if (defaultlanguage == 'F') {
printf("Impossible de trouver le compte [%s]. Le compte n'existe pas.\n", parameters);
ladmin_log("Impossible de trouver le compte [%s]. Le compte n'existe pas." RETCODE, parameters);
} else {
printf("Unabled to find the account [%s]. Account doesn't exist.\n", parameters);
ladmin_log("Unabled to find the account [%s]. Account doesn't exist." RETCODE, parameters);
}
} else if (strlen(userid) == 0) {
if (defaultlanguage == 'F') {
printf("Impossible de trouver le compte [id: %s]. Le compte n'existe pas.\n", parameters);
ladmin_log("Impossible de trouver le compte [id: %s]. Le compte n'existe pas." RETCODE, parameters);
} else {
printf("Unabled to find the account [id: %s]. Account doesn't exist.\n", parameters);
ladmin_log("Unabled to find the account [id: %s]. Account doesn't exist." RETCODE, parameters);
}
} else {
if (defaultlanguage == 'F') {
ladmin_log("R�ception d'information concernant un compte." RETCODE);
printf("Le compte a les caract�ristiques suivantes:\n");
} else {
ladmin_log("Receiving information about an account." RETCODE);
printf("The account is set with:\n");
}
if (RFIFOB(fd,6) == 0) {
printf(" Id: %d (non-GM)\n", RFIFOL(fd,2));
} else {
if (defaultlanguage == 'F') {
printf(" Id: %d (GM niveau %d)\n", RFIFOL(fd,2), (int)RFIFOB(fd,6));
} else {
printf(" Id: %d (GM level %d)\n", RFIFOL(fd,2), (int)RFIFOB(fd,6));
}
}
if (defaultlanguage == 'F') {
printf(" Nom: '%s'\n", userid);
if (RFIFOB(fd,31) == 0)
printf(" Sexe: Femme\n");
else if (RFIFOB(fd,31) == 1)
printf(" Sexe: Male\n");
else
printf(" Sexe: Serveur\n");
} else {
printf(" Name: '%s'\n", userid);
if (RFIFOB(fd,31) == 0)
printf(" Sex: Female\n");
else if (RFIFOB(fd,31) == 1)
printf(" Sex: Male\n");
else
printf(" Sex: Server\n");
}
printf(" E-mail: %s\n", email);
switch(RFIFOL(fd,36)) {
case 0:
if (defaultlanguage == 'F')
printf(" Statut: 0 [Compte Ok]\n");
else
printf(" Statut: 0 [Account OK]\n");
break;
case 1:
printf(" Statut: 1 [Unregistered ID]\n");
break;
case 2:
printf(" Statut: 2 [Incorrect Password]\n");
break;
case 3:
printf(" Statut: 3 [This ID is expired]\n");
break;
case 4:
printf(" Statut: 4 [Rejected from Server]\n");
break;
case 5:
printf(" Statut: 5 [You have been blocked by the GM Team]\n");
break;
case 6:
printf(" Statut: 6 [Your Game's EXE file is not the latest version]\n");
break;
case 7:
printf(" Statut: 7 [You are Prohibited to log in until %s]\n", error_message);
break;
case 8:
printf(" Statut: 8 [Server is jammed due to over populated]\n");
break;
case 9:
printf(" Statut: 9 [No MSG]\n");
break;
default: // 100
printf(" Statut: %d [This ID is totally erased]\n", RFIFOL(fd,36));
break;
}
if (defaultlanguage == 'F') {
if (ban_until_time == 0) {
printf(" Banissement: non banni.\n");
} else {
char tmpstr[128];
strftime(tmpstr, 24, date_format, localtime(&ban_until_time));
printf(" Banissement: jusqu'au %s.\n", tmpstr);
}
if (RFIFOL(fd,32) > 1)
printf(" Compteur: %d connexions.\n", RFIFOL(fd,32));
else
printf(" Compteur: %d connexion.\n", RFIFOL(fd,32));
printf(" Derni�re connexion le: %s (ip: %s)\n", lastlogin, last_ip);
if (connect_until_time == 0) {
printf(" Limite de validit�: illimit�.\n");
} else {
char tmpstr[128];
strftime(tmpstr, 24, date_format, localtime(&connect_until_time));
printf(" Limite de validit�: jusqu'au %s.\n", tmpstr);
}
} else {
if (ban_until_time == 0) {
printf(" Banishment: not banished.\n");
} else {
char tmpstr[128];
strftime(tmpstr, 24, date_format, localtime(&ban_until_time));
printf(" Banishment: until %s.\n", tmpstr);
}
if (RFIFOL(fd,32) > 1)
printf(" Count: %d connections.\n", RFIFOL(fd,32));
else
printf(" Count: %d connection.\n", RFIFOL(fd,32));
printf(" Last connection at: %s (ip: %s)\n", lastlogin, last_ip);
if (connect_until_time == 0) {
printf(" Validity limit: unlimited.\n");
} else {
char tmpstr[128];
strftime(tmpstr, 24, date_format, localtime(&connect_until_time));
printf(" Validity limit: until %s.\n", tmpstr);
}
}
printf(" Memo: '%s'\n", memo);
}
}
bytes_to_read = 0;
RFIFOSKIP(fd,150 + RFIFOW(fd,148));
break;
default:
printf("Remote administration has been disconnected (unknown packet).\n");
ladmin_log("'End of connection, unknown packet." RETCODE);
session[fd]->eof = 1;
return 0;
}
}
// if we don't wait new packets, do the prompt
prompt();
return 0;
}
//------------------------------------
// Function to connect to login-server
//------------------------------------
int Connect_login_server() {
if (defaultlanguage == 'F') {
printf("Essai de connection au server de logins...\n");
ladmin_log("Essai de connection au server de logins..." RETCODE);
} else {
printf("Attempt to connect to login-server...\n");
ladmin_log("Attempt to connect to login-server..." RETCODE);
}
login_fd = make_connection(login_ip, loginserverport);
#ifdef PASSWORDENC
if (passenc == 0) {
#endif
WFIFOW(login_fd,0) = 0x7918; // Request for administation login
WFIFOW(login_fd,2) = 0; // no encrypted
memcpy(WFIFOP(login_fd,4), loginserveradminpassword, 24);
WFIFOSET(login_fd,28);
bytes_to_read = 1;
if (defaultlanguage == 'F') {
printf("Envoi du mot de passe...\n");
ladmin_log("Envoi du mot de passe..." RETCODE);
} else {
printf("Sending of the password...\n");
ladmin_log("Sending of the password..." RETCODE);
}
#ifdef PASSWORDENC
} else {
WFIFOW(login_fd,0) = 0x791a; // Sending request about the coding key
WFIFOSET(login_fd,2);
bytes_to_read = 1;
if (defaultlanguage == 'F') {
printf("Demande de la clef MD5...\n");
ladmin_log("Demande de la clef MD5..." RETCODE);
} else {
printf("Request about the MD5 key...\n");
ladmin_log("Request about the MD5 key..." RETCODE);
}
}
#endif
return 0;
}
//-------------------------------------------------
// Return numerical value of a switch configuration
// on/off, english, fran�ais, deutsch, espa�ol
//-------------------------------------------------
int config_switch(const char *str) {
if (strcmpi(str, "on") == 0 || strcmpi(str, "yes") == 0 || strcmpi(str, "oui") == 0 || strcmpi(str, "ja") == 0 || strcmpi(str, "si") == 0)
return 1;
if (strcmpi(str, "off") == 0 || strcmpi(str, "no") == 0 || strcmpi(str, "non") == 0 || strcmpi(str, "nein") == 0)
return 0;
return atoi(str);
}
//-----------------------------------
// Reading general configuration file
//-----------------------------------
int ladmin_config_read(const char *cfgName) {
char line[1024], w1[1024], w2[1024];
FILE *fp;
fp = fopen(cfgName, "r");
if (fp == NULL) {
if (defaultlanguage == 'F') {
printf("\033[0mFichier de configuration (%s) non trouv�.\n", cfgName);
} else {
printf("\033[0mConfiguration file (%s) not found.\n", cfgName);
}
return 1;
}
if (defaultlanguage == 'F') {
printf("\033[0m---D�but de lecture du fichier de configuration Ladmin (%s)\n", cfgName);
} else {
printf("\033[0m---Start reading of Ladmin configuration file (%s)\n", cfgName);
}
while(fgets(line, sizeof(line)-1, fp)) {
if (line[0] == '/' && line[1] == '/')
continue;
line[sizeof(line)-1] = '\0';
if (sscanf(line, "%[^:]: %[^\r\n]", w1, w2) == 2) {
remove_control_chars(w1);
remove_control_chars(w2);
if(strcmpi(w1,"login_ip")==0){
struct hostent *h = gethostbyname (w2);
if (h != NULL) {
if (defaultlanguage == 'F') {
printf("Adresse du serveur de logins: %s -> %d.%d.%d.%d\n", w2, (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]);
} else {
printf("Login server IP address: %s -> %d.%d.%d.%d\n", w2, (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]);
}
sprintf(loginserverip, "%d.%d.%d.%d", (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]);
} else
memcpy(loginserverip, w2, 16);
} else if (strcmpi(w1, "login_port") == 0) {
loginserverport = atoi(w2);
} else if (strcmpi(w1, "admin_pass") == 0) {
strncpy(loginserveradminpassword, w2, sizeof(loginserveradminpassword));
loginserveradminpassword[sizeof(loginserveradminpassword)-1] = '\0';
#ifdef PASSWORDENC
} else if (strcmpi(w1, "passenc") == 0) {
passenc = atoi(w2);
if (passenc < 0 || passenc > 2)
passenc = 0;
#endif
} else if (strcmpi(w1, "defaultlanguage") == 0) {
if (w2[0] == 'F' || w2[0] == 'E')
defaultlanguage = w2[0];
} else if (strcmpi(w1, "ladmin_log_filename") == 0) {
strncpy(ladmin_log_filename, w2, sizeof(ladmin_log_filename));
ladmin_log_filename[sizeof(ladmin_log_filename)-1] = '\0';
} else if (strcmpi(w1, "date_format") == 0) { // note: never have more than 19 char for the date!
switch (atoi(w2)) {
case 0:
strcpy(date_format, "%d-%m-%Y %H:%M:%S"); // 31-12-2004 23:59:59
break;
case 1:
strcpy(date_format, "%m-%d-%Y %H:%M:%S"); // 12-31-2004 23:59:59
break;
case 2:
strcpy(date_format, "%Y-%d-%m %H:%M:%S"); // 2004-31-12 23:59:59
break;
case 3:
strcpy(date_format, "%Y-%m-%d %H:%M:%S"); // 2004-12-31 23:59:59
break;
}
} else if (strcmpi(w1, "import") == 0) {
ladmin_config_read(w2);
}
}
}
fclose(fp);
login_ip = inet_addr(loginserverip);
if (defaultlanguage == 'F') {
printf("---Lecture du fichier de configuration Ladmin termin�e.\n");
} else {
printf("---End reading of Ladmin configuration file.\n");
}
return 0;
}
//--------------------------------------
// Function called at exit of the server
//--------------------------------------
void do_final(void) {
if (already_exit_function == 0) {
delete_session(login_fd);
if (defaultlanguage == 'F') {
printf("\033[0m----Fin de Ladmin (fin normale avec fermeture de tous les fichiers).\n");
ladmin_log("----Fin de Ladmin (fin normale avec fermeture de tous les fichiers)." RETCODE);
} else {
printf("\033[0m----End of Ladmin (normal end with closing of all files).\n");
ladmin_log("----End of Ladmin (normal end with closing of all files)." RETCODE);
}
already_exit_function = 1;
}
}
//------------------------
// Main function of ladmin
//------------------------
int do_init(int argc, char **argv) {
// read ladmin configuration
ladmin_config_read((argc > 1) ? argv[1] : LADMIN_CONF_NAME);
ladmin_log("");
if (defaultlanguage == 'F') {
ladmin_log("Fichier de configuration lu." RETCODE);
} else {
ladmin_log("Configuration file readed." RETCODE);
}
srand(time(NULL));
set_termfunc(do_final);
set_defaultparse(parse_fromlogin);
if (defaultlanguage == 'F') {
printf("Outil d'administration � distance de eAthena.\n");
printf("(pour eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION, ATHENA_MINOR_VERSION, ATHENA_REVISION);
} else {
printf("EAthena login-server administration tool.\n");
printf("(for eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION, ATHENA_MINOR_VERSION, ATHENA_REVISION);
}
if (defaultlanguage == 'F') {
ladmin_log("Ladmin est pr�t." RETCODE);
printf("Ladmin est \033[1;32mpr�t\033[0m.\n\n");
} else {
ladmin_log("Ladmin is ready." RETCODE);
printf("Ladmin is \033[1;32mready\033[0m.\n\n");
}
Connect_login_server();
atexit(do_final);
return 0;
}
