//===== Athena Doc ========================================
//= rAthena Script Commands
//===== Description =======================================
//= A reference manual for the rAthena scripting language.
//= Commands are sorted depending on their functionality.
//===== Version ===========================================
//= 3.45.20110709
//=========================================================
//= 1.0 - First release, filled will as much info as I could
//= remember or figure out, most likely there are errors,
//= and things I have missed out [Fredzilla]
//= 1.1 - Added better discription for "getmapxy" (by Terminal Vertex & Z3R0)
//= 1.2b- Added a description for getpartymember (by HappyDenn)
//= (+few spelling mistakes corrected)
//= 2.0 - +79kb extra stuff and numerous corrections by
//= Maeki Rika.
//= 2.1 - Small but important corrections, more proofreading.
//= Some important discoveries in item functions, the
//= secret of making VVS weapons with 'getitem2' and
//= other news. (Rika again) +10kb :)
//= 2.2 - added getItemInfo description [Lupus]
//= 2.3 - added plenty of info for recent (and not so) script commands I added
//= [Skotlex]
//= 2.4 - Explained the upper parameter of jobchange. [Skotlex]
//= 2.5 - Added pow, sqrt and distance. [Lance]
//= 2.6 - Added setd and getd. [Lance]
//= 2.7 - petstat command. [Lance]
//= 2.7a- delitem2, countitems2 commands [Lupus]
//= 2.7b- clone command [Skotlex]
//= 2.7c- disguise / undisguise, query_sql commands [Lupus]
//= 2.8 - Deleted a copy of the nude command. Added axtoi command (needing a
//= clearer explanation of atoi.Gave a better explanation of OnLabels
//= and modified monster explanation due that L_Label isn't working with
//= monster.
//= 2.9.20061230 - Updated getitem and guardian. [FlavioJS]
//= 2.10.20070101 - added sleep,sleep2,awake and updated the variables section.
//= [FlavioJS]
//= 2.11.20070109 - removed the unused flag argument in guildskill, added an
//= optional argument to setcart,setfalcon,setriding and other cleanups
//= [FlavioJS]
//= 2.12.20070201 - Added npcshopitem, npcshopadditem, npcshopdelitem and
//= npcshopattach [Skotlex]
//= 3.00.20070208
//= - Explained Logical Bitwise Operators.
//= Dj-Yhn contributed to AND (&) operator, rest by myself. [erKURITA]
//= - Added a resume of allowed variable and arrays scopes. [erKURITA]
//= - Re-organized the script commands, and grouped them depending
//= on what they do. [erKURITA]
//= - Added a packload of commands that were missing,
//= and corrected some of the wrong ones [Dj-Yhn, erKURITA & Trancid]
//= 3.01.20070209
//= Updated 'cutin' (removed lies, removed outdated bmp list) [ultramage]
//= Removed 'cutincard' since eA no longer implements it
//= 3.02.20070209
//= Corrected/updated info on Xor/setd/getd/callfunc/callsub/return and
//= updated some examples to use "better" code. [FlavioJS]
//= 3.03.20070216
//= Expanded/clarified information on npc timers, added info about the
//= new attach flag for script commands startnpctimer/ stopnpctimer/
//= initnpctimer [Skotlex]
//= 3.03.20070226
//= Updated makeitem and how to include " in strings [Lupus]
//= 3.03.20070228
//= Added info on OnTimerQuit label to npctimer section. [Skotlex]
//= 3.04.20070317
//= Removed all .gat refferences from the examples [Lupus]
//= 3.04.20070330
//= Adjusted the 'itemskill' description due to recent change [ultramage]
//= 3.04.20070409
//= Fixed the incorrect order of parameters in 'makeitem' [ultramage]
//= 3.05.20070423
//= menu/select/prompt produce consistent results for grouped and empty
//= options [FlavioJS]
//= 3.05.20070819
//= Removed the messy 'unitdeadsit' command reference [ultramage]
//= 3.05.20070823
//= Fixed typo in 'areamonster' description (missing argument) [ultramage]
//= 3.06 20070909
//= Added 'gethominfo' description [Skotlex]
//= 3.06.20070910
//= Added info about the new behavior of 'getexp' [ultramage]
//= 3.07.20070915
//= Fixed 'duplicate' missing the target 'name' parameter! [ultramage]
//= 3.08.20071018
//= Clarified how npc names work. [FlavioJS]
//= 3.09.20071103
//= Added script function 'strnpcinfo' [ultramage]
//= 3.10.20071122
//= Added setnpcdisplay. [FlavioJS]
//= 3.10.20071211
//= Added query_logsql. [Skotlex]
//= 3.11.20071215
//= Updated guardianinfo and get-/setcastledata [ultramage]
//= 3.12.20071218
//= Corrected various mistakes mentioned in bugreport:373 [ultramage]
//= 3.12.20071227
//= Corrected description of scope and npc variables. [FlavioJS]
//= 3.13.20080104
//= Updated 'setcell' desc to match latest code changes [ultramage]
//= 3.14.20080211
//= Updated 'input' (new arguments and return value). [FlavioJS]
//= 3.15.20080227
//= Updated 'checkweight' description slightly. [L0ne_W0lf]
//= 3.16.20080229
//= Updated 'Shop' NPC type description to include cashshop. [L0ne_W0lf]
//= Woopth. Fixed spelling. ;P Should be a bit clearer now. [L0ne_W0lf]
//= 3.17.20080312
//= Corrected cashshop description. (#FREEPOINTS->#KAFRAPOINTS) [L0ne_W0lf]
//= 3.18.20080327
//= Added documentation for the 'checkcell' command [ultramage]
//= 3.19.20080407
//= Extended the behaviour of 'guardian'. [FlavioJS]
//= 3.20.20080425
//= Corrected 'getitem', 'getitem2' & 'delitem2' (charid instead of accountid) [Toms]
//= Modified 'delitem' (added optional accountid parameter) [Toms]
//= 3.21.20080612
//= Script commands extended to support skill names: [FlavioJS]
//= skill, addtoskill, guildskill, getskilllv, getgdskilllv, itemskill,
//= petskillattack, petskillattack2, petskillsupport, skilleffect, npcskilleffect,
//= unitskilluseid, unitskillusepos, bonus/bonus2/bonus3/bonus4/bonus5
//= 3.22.20080622
//= Extended 'set' to return the variable reference. [FlavioJS]
//= 3.22.20080901
//= Adjusted the 'getequipname' description to match src [ultramage]
//= 3.23.20080909
//= Added WoE SE related commands. [L0ne_W0lf]
//= 3.24.20081111
//= Changed the error behaviour of delitem/delitem2/Zeny. [FlavioJS]
//= 3.25.20081220
//= Extended the behaviour of duplicates (warps/shops/cashshops). [FlavioJS]
//= 3.26.20090702
//= Replaced 'bonusautoscript' by 'autobonus'. [Inkfish]
//= 3.27.20090725
//= Added Quest Log related commands. [Inkfish]
//= 3.28.20091119
//= Added showevent and searchitem commands [Skotlex]
//= Added info on strcharinfo(3) [Skotlex]
//= 3.29.20101123
//= Added 'pushpc' command. [Ai4rei]
//= 3.30.20101126
//= Added 'setfont', 'mercenary_create', 'mercenary_heal',
//= 'mercenary_sc_start', 'mercenary_get_calls', 'mercenary_set_calls',
//= 'mercenary_get_faith' and 'mercenary_set_faith' commands. [Ai4rei]
//= 3.31.20101130
//= Added 'progressbar' command. [Ai4rei]
//= 3.32.20101208
//= Updated description for commands 'next', 'return', 'attachrid',
//= 'detachrid', 'itemskill', 'openstorage', 'skilleffect', 'donpcevent',
//= 'day', 'night', 'atoi', 'axtoi', 'jump_zero', 'getelementofarray',
//= 'changebase', 'kickwaitingroomall', 'cutin' and 'charcommand'. [Ai4rei]
//= 3.33.20101212
//= Updated description of 'playBGM' and 'playBGMall' to reflect the actual
//= behavior. [Ai4rei]
//= 3.34.20101217
//= Spellcheck. [Ai4rei]
//= 3.35.20110106
//= Removed bug warning from 'deletearray'. [Ai4rei]
//= 3.36.20110219
//= Added 'buyingstore' command. [Ai4rei]
//= 3.37.20110306
//= Added 'searchstores' command. [Ai4rei]
//= 3.38.20110313
//= Added 'cooking' command. [Ai4rei]
//= Fixed item levels in 'produce' command.
//= 3.39.20110322
//= Added 'bg_getareausers' and 'bg_get_data' commands. [Ai4rei]
//= Updated description of 'waitingroom2bg_single' command.
//= Documented optional parameter 'npc name' of 'waitingroom2bg' command.
//= 3.40.20110404
//= Updated description of 'waitingroom' command to include required zeny/lvl. [Kisuka]
//= 3.41.20110427
//= Updated description of 'itemheal' primarily to remove overhead and lies
//= about client effects. [Ai4rei]
//= 3.42.20110508
//= Updated description of all instance commands to reflect actual behavior.
//= [Ai4rei]
//= 3.43.20110529
//= Updated 'npcshopitem', 'npcshopadditem' and 'npcshopdelitem' to support
//= cashshops as well. [Ai4rei]
//= 3.44.20110530
//= Documented special map names recognized by 'warpguild'. [Ai4rei]
//= 3.45.20110709
//= Added 'getmercinfo' command. [Ai4rei]
//= 3.46.20110810
//= Added information on OnTouchNPC and 'unitwarp' special case [Skotlex]
//=========================================================
This document is a reference manual for all the scripting commands and functions
available in current rAthena SVN. It is not a simple tutorial. When people tell
you to "Read The F***ing Manual", they mean this.
The information was mostly acquired through looking up how things actually work
in the source code of the server, which was written by many people over time,
and lots of them don't speak English and never left any notes - or are otherwise
not available for comments. As such, anything written in here might not be
correct, it is only correct to the best of our knowledge, which is limited.
This is not a place to teach you basic programming. This document will not teach
you basic programming by itself. It's more of a reference for those who have at
least a vague idea of what they want to do and want to know what tools they have
available to do it. We've tried to keep it as simple as feasible, but if you
don't understand it, getting a clear book on programming in general will help
better than yelling around the forum for help.
A little learning never caused anyone's head to explode.
Structure
---------
The commands and functions are listed in no particular order:
*Name of the command and how to call it.
Descriptive text
Small example if possible. Will usually be incomplete, it's there just to
give you an idea of how it works in practice.
To find a specific command, use Ctrl+F, (or whatever keys call up a search
function in whatever you're reading this with) put an * followed by the command
name, and it should find the command description for you.
If you find anything omitted, please respond. :)
Syntax
------
Throughout this document, wherever a command wants an argument, it is given in
<angle brackets>. This doesn't mean you should type the angle brackets. :) If an
argument of a command is optional, it is given in {curly brackets}. You've
doubtlessly seen this convention somewhere, if you didn't, get used to it,
that's how big boys do it. If a command can optionally take an unspecified
number of arguments, you'll see a list like this:
command <argument>{,<argument>...<argument>}
This still means they will want to be separated by commas.
Where a command wants a string, it will be given in "quotes", if it's a number,
it will be given without them. Normally, you can put an expression, like a bunch
of functions or operators returning a value, in (round brackets) instead of most
numbers. Round brackets will not always be required, but they're often a good
idea.
Wherever you refer to a map name, it's always 'mapname' or 'mapname.gat'
(Please, don't use .gat suffix anymore. It's useless.)
Script loading structure
------------------------
Scripts are loaded by the map server as referenced in the 'conf/map_athena.conf'
configuration file, but in the default configuration, it doesn't load any script
files itself. Instead, it loads the file 'npc/scripts_main.conf' which itself
contains references to other files. The actual scripts are loaded from txt
files, which are linked up like this:
npc: <path to a filename>
Any line like this, invoked, ultimately, by 'map_athena.conf' will load up the
script contained in this file, which will make the script available. No file
will get loaded twice, to prevent possible errors.
Another configuration file option of relevance is:
delnpc: <path to a filename>
This will unload a specified script filename from memory, which, while
seemingly useless, may sometimes be required.
Whenever '//' is encountered in a line upon reading, everything beyond this on
that line is considered to be a comment and is ignored. This works wherever you
place it.
// This line will be ignored when processing the script.
Block comments can also be used, where you can place /* and */ between any text you
wish rAthena to ignore.
Example:
/* This text,
* no matter which new line you start
* is ignored, until the following
* symbol is encountered: */
The asterisks (*) in front of each line is a personal preference, and is not required.
Upon loading all the files, the server will execute all the top-level commands
in them. No variables exist yet at this point, no commands can be called other
than those given in this section. These commands set up the basic server script
structure - create NPC objects, spawn monster objects, set map flags, etc. No
code is actually executed at this point except them. The top-level commands the
scripting are pretty confusing, since they aren't structured like you would
expect commands, command name first, but rather, normally start with a map name.
What's more confusing about the top-level commands is that most of them use a
tab symbol to divide their arguments.
To prevent problems and confusion, the tab symbols are written as '%TAB%'
throughout this document, even though this makes the text a bit less readable.
Using an invisible symbol to denote arguments is one of the bad things about
this language, but we're stuck with it for now. :)
Here is a list of valid top-level commands:
** Set a map flag:
<map name>%TAB%mapflag%TAB%<flag>
This will, upon loading, set a specified map flag on a map you like. These are
normally in files inside 'conf/mapflag' and are loaded first, so by the time the
server's up, all the maps have the flags they should have. Map flags determine
the behavior of the map regarding various common problems, for a better
explanation, see 'setmapflag'.
** Create a permanent monster spawn:
<map name>,<x>,<y>,<xs>,<ys>%TAB%monster%TAB%<monster name>%TAB%<mob id>,<amount>,<delay1>,<delay2>,<event>
Map name is the name of the map the monsters will spawn on. x,y are the
coordinates where the mob should spawn. If xs and ys are non-zero, they
specify the diameters of a spawn-rectangle area who's center is x,y.
Putting zeros instead of these coordinates will spawn the monsters randomly.
Note this is only the initial spawn zone, as mobs random-walk, they are free
to move away from their specified spawn region.
Monster name is the name the monsters will have on screen, and has no relation
whatsoever to their names anywhere else. It's the mob id that counts, which
identifies monster record in 'mob_db.txt' database of monsters. If the mob name
is given as "--ja--", the 'japanese name' field from the monster database is
used, (which, in rAthena, actually contains an english name) if it's "--en--",
it's the 'english name' from the monster database (which contains an uppercase
name used to summon the monster with a GM command).
If you add 20000 to the monster ID, the monster will be spawned in a 'big
version', (monster size class will increase) and if you add 10000, the 'tiny
version' of the monster will be created. However, this method is deprecated
and not recommended, as the values to add can change at a later time (20000
and 10000 actually stand for 2*MAX_MOB_DB and MAX_MOB_DB respectively, which
is defined on mob.h, and can change in the future as more mobs are created).
The recommended way to change a mob's size is to use the event-field (see
below).
Amount is the amount of monsters that will be spawned when this command is
executed, it is affected by spawn rates in 'battle_athena.conf'.
Delay1 and delay2 control monster respawn delays - the first one is the fixed
base respawn time, and the second is random variance on top of the base time.
Both values are given in miliseconds (1000 = 1 second).
Note that the server also enforces a minimum respawn delay of 5 seconds.
You can specify a custom level to use for the mob different from the one of
the database by adjoining the level after the name with a comma. eg:
"Poring,50" for a name will spawn a monster with name Poring and level 50.
Event is a script event to be executed when the mob is killed. The event must
be in the form "NPCName::OnEventName" to execute, and the event name label
should start with "On". As with all events, if the NPC is an on-touch NPC, the
player who triggers the script must be within 'trigger' range for the event to
work.
The Event field can be used alternatively to specify other mob properties. Use
2 to specify that the mob should be small, 4 for big monsters, and 8 for
special ai mobs (which by default attack other monsters instead of players).
You can add these, so using 10 will spawn small monsters that attack other
mobs (if you specify both 2 and 4, the small version takes priority).
** NPC names
/!\ WARNING: this applies to warps, NPCs, duplicates and shops /!\
NPC names are kinda special and are formatted this way:
<Display name>{::<Unique name>}
All NPCs need to have a unique name that is used for identification purposes.
When you have to identify a NPC by it's name, you should use <Unique name>.
If <Unique name> is not provided, use <Display name> instead.
The client has a special feature when displaying names:
if the display name contains a '#' character, it hides that part of the name.
ex: if your NPC is named 'Hunter#hunter1', it will be displayed as 'Hunter'
<Display name> must be at most 24 characters in length.
<Unique name> must be at most 24 characters in length.
** Define a warp point
<from map name>,<fromX>,<fromY>,<facing>%TAB%warp%TAB%<warp name>%TAB%<spanx>,<spany>,<to map name>,<toX>,<toY>
This will define a warp NPC that will warp a player between maps, and while most
arguments of that are obvious, some deserve special mention.
SpanX and SpanY will make the warp sensitive to a character who didn't step
directly on it, but walked into a zone which is centered on the warp from
coordinates and is SpanX in each direction across the X axis and SpanY in each
direction across the Y axis.
Warp NPC objects also have a name, because you can use it to refer to them later
with 'enablenpc'/'disablenpc'
Facing of a warp object is irrelevant, it is not used in the code and all
current scripts have a zero in there.
** Define an NPC object.
<map name>,<x>,<y>,<facing>%TAB%script%TAB%<NPC Name>%TAB%<sprite id>,{<code>}
<map name>,<x>,<y>,<facing>%TAB%script%TAB%<NPC Name>%TAB%<sprite id>,<triggerX>,<triggerY>,{<code>}
This will place an NPC object on a specified map at the specified location, and
is a top-level command you will use the most in your custom scripting. The NPCs
are triggered by clicking on them, and/or by walking in their trigger area, if
defined, see that below.
Facing is a direction the NPC sprite will face in. Not all NPC sprites have
different images depending on the direction you look from, so for some facing
will be meaningless. Facings are counted counterclockwise in increments of 45
degrees, where 0 means facing towards the top of the map. (So to turn the sprite
towards the bottom of the map, you use facing 4, and to make it look southeast
it's facing 5.)
Sprite id is the sprite number used to display this particular NPC. For a full
list of sprite id numbers see http://kalen.s79.xrea.com/npc/npce.shtml You may
also use a monster's ID number instead to display a monster sprite for this NPC.
It is possible to use a job sprite as well, but you must first define it as a
monster sprite in 'mob_avail.txt', a full description on how to do this is not
in the scope of this manual.
A '-1' sprite id will make the NPC invisible (and unclickable).
A '111' sprite id will make an NPC which does not have a sprite, but is still
clickable, which is useful if you want to make a clickable object of the 3D
terrain.
TriggerX and triggerY, if given, will define an area, centered on NPC and
spanning triggerX cells in every direction across X and triggerY in every
direction across Y. Walking into that area will trigger the NPC. If no
'OnTouch:' special label is present in the NPC code, the execution will start
from the beginning of the script, otherwise, it will start from the 'OnTouch:'
label. Monsters can also trigger the NPC, though the label 'OnTouchNPC:' is
used in this case.
The code part is the script code that will execute whenever the NPC is
triggered. It may contain commands and function calls, descriptions of which
compose most of this document. It has to be in curly brackets, unlike elsewhere
where we use curly brackets, these do NOT signify an optional parameter.
** Define a 'floating' NPC object.
-%TAB%script%TAB%<NPC Name>%TAB%-1,{<code>}
This will define an NPC object not triggerable by normal means. This would
normally mean it's pointless since it can't do anything, but there are
exceptions, mostly related to running scripts at specified time, which is what
these floating NPC objects are for. More on that below.
** Define a shop/cashshop NPC.
-%TAB%shop%TAB%<NPC Name>%TAB%<sprite id>,<itemid>:<price>{,<itemid>:<price>...}
<map name>,<x>,<y>,<facing>%TAB%shop%TAB%<NPC Name>%TAB%<sprite id>,<itemid>:<price>{,<itemid>:<price>...}
This will define a shop NPC, which, when triggered (which can only be done by
clicking) will cause a shop window to come up. No code whatsoever runs in shop
NPCs and you can't change the prices otherwise than by editing the script
itself. (No variables even exist at this point of scripting, so don't even
bother trying to use them.)
The item id is the number of item in the 'item_db.txt' database. If Price is set
to -1, the 'buy price' given in the item database will be used. Otherwise, the
price you gave will be used for this item, which is how you create differing
prices for items in different shops.
Since trunk r12264 you can alternatively use "cashshop" in place of "shop"
to use the Cash Shop interface, allowing you to buy items with special points
(Currently stored as account vars in global_reg #CASHPOINTS and #KAFRAPOINTS.)
This type of shop will not allow you to sell items at it, you may only
purchase items here. The layout used to define sale items still count, and
"<price>" refers to how many points will be spent purchasing the them.
** Define an warp/shop/cashshop/NPC duplicate.
warp: <map name>,<x>,<y>,<facing>%TAB%duplicate(<label>)%TAB%<NPC Name>%TAB%<spanx>,<spany>
shop/cashshop/npc: -%TAB%duplicate(<label>)%TAB%<NPC Name>%TAB%<sprite id>
shop/cashshop/npc: <map name>,<x>,<y>,<facing>%TAB%duplicate(<label>)%TAB%<NPC Name>%TAB%<sprite id>
npc: -%TAB%duplicate(<label>)%TAB%<NPC Name>%TAB%<sprite id>,<triggerX>,<triggerY>
npc: <map name>,<x>,<y>,<facing>%TAB%duplicate(<label>)%TAB%<NPC Name>%TAB%<sprite id>,<triggerX>,<triggerY>
This will duplicate an warp/shop/cashshop/NPC referred to by 'label'.
Warp duplicates inherit the target location.
Shop/cashshop duplicates inherit the item list.
NPC duplicates inherit the script code.
The rest (name, location, facing, sprite ID, span/trigger area)
is obtained from the definition of the duplicate (not inherited).
** Define a function object
function%TAB%script%TAB%<function name>%TAB%{<code>}
This will define a function object, callable with the 'callfunc' command (see
below). This object will load on every map server separately, so you can get at
it from anywhere. It's not possible to call the code in this object by
anything other than the 'callfunc' script command.
The code part is the script code that will execute whenever the function is
called with 'callfunc'. It has to be in curly brackets, unlike elsewhere where
we use curly brackets, these do NOT signify an optional parameter.
Once an object is defined which has a 'code' field to it's definition, it
contains script commands which can actually be triggered and executed.
~ RID? GID? ~
What a RID is and why do you need to know
-----------------------------------------
Most scripting commands and functions will want to request data about a
character, store variables referenced to that character, send stuff to the
client connected to that specific character. Whenever a script is invoked by a
character, it is passed a so-called RID - this is the account ID number of a
character that caused the code to execute by clicking on it, walking into it's
OnTouch zone, or otherwise.
If you are only writing common NPCs, you don't need to bother with it. However,
if you use functions, if you use timers, if you use clock-based script
activation, you need to be aware of all cases when a script execution can be
triggered without a RID attached. This will make a lot of commands and functions
unusable, since they want data from a specific character, want to send stuff to
a specific client, want to store variables specific to that character, and they
would not know what character to work on if there's no RID.
Unless you use 'attachrid' to explicitly attach a character to the script first.
Whenever we say 'invoking character', we mean 'the character who's RID is
attached to the running script. The script function "playerattached" can be
used to check which is the currently attached player to the script (it will
return 0 if the there is no player attached or the attached player no longer
is logged on to the map-server).
But what about GID?
--- ---- ----- ----
GID stands for the Game ID of something, this can either be the GID obtained
through mobspawn (mob control commands) or the account ID of a character.
Another way would be to right click on a mob,
NPC or char as GM sprited char to view the GID.
This is mostly used for the new version of skill and the mob control commmands
implemented (but NEVER documented by Lance. Shame on you...).
Item and pet scripts
--------------------
Each item in the item database has three special fields - Script , OnEquip_Script
and OnUnequip_Script. The first is script code run every time a character equips the item,
with the RID of the equipping character. Every time they unequip an item, all
temporary bonuses given by the script commands are cleared, and all the scripts
are executed once again to rebuild them. This also happens in several other
situations (like upon login) but the full list is currently unknown.
OnEquip_Script is a piece of script code run whenever the item is used by a character
by doubleclicking on it. OnUnequip_Script runs whenever the
equipment is unequip by a character
Not all script commands work properly in the item scripts. Where commands and
functions are known to be meant specifically for use in item scripts, they are
described as such.
Every pet in the pet database has a PetScript field, which determines pet
behavior. It is invoked wherever a pet of the specified type is spawned.
(hatched from an egg, or loaded from the char server when a character who had
that pet following them connects) This may occur in some other situations as
well. Don't expect anything other than commands definitely marked as usable in
pet scripts to work in there reliably.
Numbers
-------
Beside the common decimal numbers, which are nothing special whatsoever (though
do not expect to use fractions, since ALL numbers are integer in this language),
the script engine also handles hexadecimal numbers, which are otherwise
identical. Writing a number like '0x<hex digits>' will make it recognized as a
hexadecimal value. Notice that 0x10 is equal to 16. Also notice that if you try
to 'mes 0x10' it will print '16'.
This is not used much, but it pays to know about it.
Variables
---------
The meat of every programming language is variables - places where you store
data.
In the rAthena scripting language, variable names are not case sensitive.
Variables are divided into and uniquely identified by the combination of:
prefix - determines the scope and extent (or lifetime) of the variable
name - an identifier consisting of '_' and alphanumeric characters
postfix - determines the type of the variable: integer or string
Scope can be:
global - global to all servers
local - local to the server
account - attached to the account of the character identified by RID
character - attached to the character identified by RID
npc - attached to the NPC
scope - attached to the scope of the instance
Extent can be:
permanent - They still exist when the server resets.
temporary - They cease to exist when the server resets.
Prefix: scope and extent
nothing - A permanent variable attached to the character, the default variable
type. They are stored with all the account data in "save\athena.txt"
in TXT versions and in the SQL versions in the `global_reg_value`
table using type 3.
"@" - A temporary variable attached to the character.
SVN versions before 2094 revision and RC5 version will also treat
'l' as a temporary variable prefix, so beware of having variable
names starting with 'l' if you want full backward compatibility.
"$" - A global permanent variable.
They are stored in "save\mapreg.txt" or database table `mapreg`,
depending on server type.
"$@" - A global temporary variable.
This is important for scripts which are called with no RID
attached, that is, not triggered by a specific character object.
"." - A NPC variable.
They exist in the NPC and disappear when the server restarts or the
NPC is reloaded. Can be accessed from inside the NPC or by calling
'getvariableofnpc'. Function objects can also have .variables which
are accessible from inside the function, however 'getvariableofnpc'
does NOT work on function objects.
".@" - A scope variable.
They are unique to the instance and scope. Each instance has it's
own scope that ends when the script ends. Calling a function with
callsub/callfunc starts a new scope, returning from the function
ends it. When a scope ends, it's variables are converted to values
('return .@var;' returns a value, not a reference).
"'" - An instance variable
These are used with the instancing system, and are unique to each
party's instance.
"#" - A permanent local account variable.
They are stored with all the account data in "save\accreg.txt" in
TXT versions and in the SQL versions in the 'global_reg_value'
table using type 2.
"##" - A permanent global account variable stored by the login server.
They are stored in "save\account.txt" and in the SQL versions in the
'global_reg_value' table, using type 1. The only difference you will
note from normal # variables is when you have multiple char-servers
connected to the same login server. The # variables are unique to
each char-server, while the ## variables are shared by all these
char-servers.
Postfix: integer or string
nothing - integer variable, can store positive and negative numbers, but only
whole numbers (so don't expect to do any fractional math)
'$' - string variable, can store text
Examples:
name - permanent character integer variable
name$ - permanent character string variable
@name - temporary character integer variable
@name$ - temporary character string variable
$name - permanent global integer variable
$name$ - permanent global string variable
$@name - temporary global integer variable
$@name$ - temporary global string variable
.name - NPC integer variable
.name$ - NPC string variable
.@name - scope integer variable
.@name$ - scope string variable
#name - permanent local account integer variable
#name$ - permanent local account string variable
##name - permanent global account integer variable
##name$ - permanent global account string variable
If a variable was never set, it is considered to equal zero for integer
variables or an empty string ("", nothing between the quotes) for string
variables. Once you set it to that, the variable is as good as forgotten
forever, and no trace remains of it even if it was stored with character or
account data.
Some variables are special, that is, they are already defined for you by the
scripting engine. You can see the full list somewhere in 'db/const.txt', which
is a file you should read, since it also allows you to replace lots of numbered
arguments for many commands with easier to read text. The special variables most
commonly used are all permanent character-based variables:
StatusPoint - Amount of status points remaining.
BaseLevel - Current base level
SkillPoint - Amount of skill points remaining
Class - Current job
Upper - 1 if the character is an advanced job class.
Zeny - Current amount of Zeny
Sex - Character's gender, 0 if female, 1 if male.
Weight - The weight the character currently carries.
MaxWeight - The maximum weight the character can carry.
JobLevel - Character's job level
BaseExp - The amount of base experience points the character has.
Notice that it's zero (or close) if the character just got a level.
JobExp - Same for job levels
NextBaseExp - Amount of experience points needed to reach the next base level.
NextJobExp - Same for job levels.
Hp - Current amount of hit points.
MaxHp - Maximum amount of hit points.
Sp - Current spell points.
MaxSp - Maximum amount of spell points.
BaseJob - This is sneaky, apparently meant for baby class support.
This will supposedly equal Job_Acolyte regardless of whether the
character is an acolyte or a baby acolyte, for example.
Karma - The character's karma. Karma system is not fully functional, but
this doesn't mean this doesn't work at all. Not tested.
Manner - The character's manner rating. Becomes negative if the player
utters words forbidden through the use of 'manner.txt' client-side
file.
While these behave as variables, do not always expect to just set them - it is
not certain whether this will work for all of them. Whenever there is a command
or a function to set something, it's usually preferable to use that instead. The
notable exception is Zeny, which you can and often will address directly -
setting it will make the character own this number of Zeny.
If you try to set Zeny to a negative number, the script will be terminated with an error.
Strings
-------
To include symbol '"' in a string you should use prefix '\"'
Arrays
------
Arrays (in rAthena at least) are essentially a set of variables going under the
same name. You can tell between the specific variables of an array with an
'array index', a number of a variable in that array:
<variable name>[<array index>]
Variables stored in this way, inside an array, are also called 'array elements'.
Arrays are specifically useful for storing a set of similar data (like several
item IDs for example) and then looping through it. You can address any array
variable as if it was a normal variable:
set @arrayofnumbers[0],1;
You can also do sneaky things like using a variable (or an expression, or even a
value from an another array) to get at an array value:
set @x,100;
set @arrayofnumbers[@x],10;
This will make @arrayofnumbers[100] equal to 10.
Notice that index numbering always starts with 0. Arrays cannot hold more than
128 variables. (So the last one can't have a number higher than 127)
And array indexes probably can't be negative. Nobody tested what happens when
you try to get a negatively numbered variable from an array, but it's not going
to be pretty. :)
Arrays can naturally store strings:
@menulines$[0] is the 0th element of the @menulines$ array of strings. Notice
the '$', normally denoting a string variable, before the square brackets that
denotes an array index.
Resume of the allowed variable and array scopes
------ -- --- ------- -------- --- ----- ------
+==========+======+=======+
|VarType | Norm | Array |
+==========+======+=======+
|$Str$ | OK! | OK! |
+----------+------+-------+
|$@Str$ | OK! | OK! |
+----------+------+-------+
|@Str$ | OK! | OK! |
+----------+------+-------+
|#Str$ | OK! | FAIL! |
+----------+------+-------+
|Str$ | OK! | FAIL! |
+----------+------+-------+
|$Int | OK! | OK! |
+----------+------+-------+
|$@Int | OK! | OK! |
+----------+------+-------+
|@Int | OK! | OK! |
+----------+------+-------+
|#Int | OK! | FAIL! |
+----------+------+-------+
|Int | OK! | FAIL! |
+----------+------+-------+
|.Str$ | OK! | OK! |
+----------+------+-------+
|.Int | OK! | OK! |
+----------+------+-------+
|.@Str$ | OK! | OK! |
+----------+------+-------+
|.@Int | OK! | OK! |
+----------+------+-------+
Variable References
-------------------
//##TODO
Operators
---------
Operators are things you can do to variables and numbers. They are either the
common mathematical operations or conditional operators
+ - will add two numbers. If you try to add two strings, the result will be a
string glued together at the +. You can add a number to a string, and the
result will be a string. No other math operators work with strings.
- - will subtract two numbers.
* - will multiply two numbers.
/ - will divide two numbers. Note that this is an integer division, i.e.
7/2 is not equal 3.5, it's equal 3.
% - will give you the remainder of the division. 7%2 is equal to 1.
There are also conditional operators. This has to do with the conditional
command 'if' and they are meant to return either 1 if the condition is satisfied
and 0 if it isn't. (That's what they call 'boolean' variables. 0 means 'False'.
Anything except the zero is 'True' Odd as it is, -1 and -5 and anything below
zero will also be True.)
You can compare numbers to each other and you compare strings to each other, but
you can not compare numbers to strings.
== - Is true if both sides are equal. For strings, it means they are the same.
>= - True if the first value is equal to, or greater than, the second value.
<= - True if the first value is equal to, or less than, the second value
> - True if the first value greater than the second value
< - True if the first value is less than the second value
!= - True if the first value IS NOT equal to the second one
Examples:
1==1 is True.
1<2 is True while 1>2 is False.
@x>2 is True if @x is equal to 3. But it isn't true if @x is 2.
Only '==' and '!=' have been tested for comparing strings. Since there's no way
to code a seriously complex data structure in this language, trying to sort
strings by alphabet would be pointless anyway.
Comparisons can be stacked in the same condition:
&& - Is True if and only if BOTH sides are true.
('1==1 && 2==2' is true. '2==1 && 1==1' is false.)
|| - Is True if either side of this expression is True.
1==1 && 2==2 is True.
1==1 && 2==1 is False.
1==1 || 2==1 is True.
Logical bitwise operators work only on numbers, and they are the following:
<< - Left shift.
>> - Right shift.
Left shift moves the binary 1(s) of a number n positions to the left,
which is the same as multiplying by 2, n times.
In the other hand, Right shift moves the binary 1(s) of a number n positions
to the right, which is the same as dividing by 2, n times.
Example:
set b,2;
set a, b << 3;
mes a;
set a, a >> 2;
mes a;
The first mes command would display 16, which is the same as 2 x (2 x 2 x 2) = 16.
The second mes command would display 4, which is the same as 16 / 2 = 8. 8 / 2 = 4.
& - And.
| - Or.
The bitwise operator AND (&) is used to test two values against each other,
and results in setting bits which are active in both arguments. This can
be used for a few things, but in rAthena this operator is usually used to
create bit-masks in scripts.
The bitwise operator OR (|)sets to 1 a binary position if the binary position
of one of the numbers is 1. This way a variable can hold several values we can check,
known as bit-mask. A variable currently can hold up to 32 bit-masks (from position 0
to position 1). This is a cheap(skate) and easy way to avoid using arrays to store several checks
that a player can have.
A bit-mask basically is (ab)using the variables bits to set various options in
one variable. With the current limit if variables it is possible to store 32
different options in one variable (by using the bits on position 0 to 31).
Example(s):
- Basic example of the & operator, bit example:
10 & 2 = 2
Why? :
10 = 2^1 + 2^3 (2 + 8), so in bits, it would be 1010
2 = 2^1 (2), so in bits (same size) it would be 0010
The & (AND) operator sets bits which are active (1) in both arguments, so in the
example 1010 & 0010, only the 2^1 bit is active (1) in both. Resulting in the bit
0010, which is 2.
- Basic example of creating and using a bit-mask:
set @options,2|4|16; //(note: this is the same as 2+4+16, or 22)
if (@options & 1) mes "Option 1 is activated";
if (@options & 2) mes "Option 2 is activated";
if (@options & 4) mes "Option 3 is activated";
if (@options & 8) mes "Option 4 is activated";
if (@options & 16) mes "Options 5 is activated";
This would return the messages about option 2, 3 and 5 being shown (since we've set
the 2,4 and 16 bit to 1).
^ - Xor.
The bitwise operator XOR (eXclusive OR) sets a binary position to 0 if both
numbers have the same value in the said position. On the other hand, it
sets to 1 if they have different values in the said binary position.
This is another way of setting and unsetting bits in bit-masks.
Example:
- First let's set the quests that are currently in progress:
set inProgress,1|8|16; // quest 1,8 and 16 are in progress
- After playing for a bit, the player starts another quest:
if( inProgress&2 == 0 ){
// this will set the bit for quest 2 (inProgress has that bit set to 0)
set inProgress,inProgress^2;
mes "Quest 2: find a newbie and be helpful to him for an hour.";
close;
}
- After spending some time reading info on Xor's, the player finally completes quest 1:
if( inProgress&1 && isComplete ){
// this will unset the bit for quest 1 (inProgress has that bit set to 1)
set inProgress,inProgress^1;
mes "Quest 1 complete!! You unlocked the secrets of the Xor dynasty, use them wisely.";
close;
}
Unary operators with only with a single number, which follows the operator, and
are following:
- - Negation.
The sign of the number will be reversed. If the number was positive, it will
become negative and vice versa.
Example:
set .@myvar,10;
mes "Negative 10 is "+(-.@myvar);
! - Logical Not.
Reverses the boolean result of an expression. True will become false and
false will become true.
Example:
if(!callfunc("F_dosomething"))
{
mes "Doing something failed.";
close;
}
~ - Bitwise Not.
Reverses each bit in a number, also known as one's complement. Cleared bits
are set, and set bits are cleared.
Example:
- Ensure, that quest 2 is disabled, while keeping all other active, if they are.
set inProgress,inProgress&(~2); // same as set inProgress,inProgress&0xfffffffd
Ternary operators take three expressions (numbers, strings or boolean), and are
following:
?: - Conditional operator
Very useful e.g. to replace
if(Sex) mes "..."; else mes "...";
clauses with simple
mes "Welcome, " + (Sex?"Mr.":"Mrs.") + " " + strcharinfo(0);
or to replace any other simple if-else clauses. It might be worth
mentioning that ?: has low priority and has to be enclosed with
parenthesis in most (if not all) cases.
Labels
------
Within executable script code, some lines can be labels:
<label name>:
Labels are points of reference in your script, which can be used to route
execution with 'goto', 'menu' and 'jump_zero' commands, invoked with 'doevent'
and 'donpcevent' commands and are otherwise essential. A label's name may not be
longer than 22 characters. (23rd is the ':'.) There is some confusion in the
source about whether it's 22, 23 or 24 all over the place, so keeping labels
under 22 characters could be wise. In addition to labels you name yourself,
there are also some special labels which the script engine will start execution
from if a special event happens:
OnClock<hour><minute>:
OnMinute<minute>:
OnHour<hour>:
On<weekday><hour><minute>:
OnDay<month><day>:
This will execute when the server clock hits the specified date or time. Hours
and minutes are given in military time. ('0105' will mean 01:05 AM). Weekdays
are Sun,Mon,Tue,Wed,Thu,Fri,Sat. Months are 01 to 12, days are 01 to 31.
Remember the zero. :)
OnInit:
OnInterIfInit:
OnInterIfInitOnce:
OnInit will execute every time the scripts loading is complete, including when
they are reloaded with @reloadscript command. OnInterIfInit will execute when
the map server connects to a char server, OnInterIfInitOnce will only execute
once and will not execute if the map server reconnects to the char server later.
OnAgitStart:
OnAgitEnd:
OnAgitInit:
OnAgitStart2:
OnAgitEnd2:
OnAgitInit2:
OnAgitStart will run whenever the server shifts into WoE mode, whether it is
done with @agitstart GM command or with 'AgitStart' script command. OnAgitEnd
will do likewise for the end of WoE. OnAgitInit will run when castle data is
loaded from the char-server by the map server.
No RID will be attached while any of the above mentioned labels are triggered, so
no character or account-based variables will be accessible, until you attach a
RID with 'attachrid' (see below).
The above also applies to, the last three labels, the only difference is that
these labels are used exclusively for WoE SE, and are called independently.
OnTouch:
This label will be executed if a trigger area is defined for the NPC object it's
in. If it isn't present, the execution will start from the beginning of the NPC
code. The RID of the triggering character object will be attached.
OnPCLoginEvent:
OnPCLogoutEvent:
OnPCBaseLvUpEvent:
OnPCJobLvUpEvent:
It's pretty obvious when these four special labels will be invoked. For more
information, see 'doc/sample/PCLoginEvent.txt'
OnPCDieEvent:
This special label triggers when a player dies. The variable 'killerrid' is
set to the ID of the killer.
OnPCKillEvent:
This special label triggers when a player kills another player. The variable
'killedrid' is set to the ID of the player killed.
OnNPCKillEvent:
This special label triggers when a player kills a monster. The variable
'killedrid' is set to the Class of the monster killed.
OnPCLoadMapEvent:
This special label will trigger once a player steps in a map marked with the
'loadevent' mapflag and attach its RID. The fact that this label requires a
mapflag for it to work is because, otherwise, it'd be server-wide and trigger
every time a player would change maps. Imagine the server load with 1,000 players
(oh the pain...)
Only the special labels which are not associated with any script command are
listed here. There are other kinds of labels which may be triggered in a similar
manner, but they are described with their associated commands.
On<label name>:
These special labels are used with Mob scripts mostly, and script commands
that requires you to point/link a command to a mob or another NPC, giving a label
name to start from. The label name can be any of your liking, but must be
Example:
monster "prontera",123,42,"Poringz0rd",2341,23,"Master::OnThisMobDeath";
amatsu,13,152,4 script Master 767,{
mes "Hi there";
close;
OnThisMobDeath:
announce "Hey, "+strcharinfo(0)+" just killed a Poringz0rd!",bc_blue|bc_all;
end;
}
Each time you kill one, that announce will appear in blue to everyone.
"Global" labels
There's a catch with labels and doevent. If you call a label (using doevent)
and called label is in NPC that has trigger area, that label must end with
"Global" to work globally (i.e. if RID is outside of the trigger area, which
usually happens since otherwise there would be no point calling the label with
doevent, because OnTouch would do the job). For further reference look for
npc_event in npc.c.
Scripting commands and functions
--------------------------------
The commands and functions are listed here in no particular order. There's a
difference between commands and functions - commands leave no 'return value'
which might be used in a conditional statement, as a command argument, or stored
in a variable. Calling commands as if they were functions will sometimes work,
but is not advised, as this can lead to some hard to track errors. Calling
functions as if they were commands will mess up the stack, so 'return' command
will not return correctly after this happens in a particular script.
All commands must end with a ';'. Actually, you may expect to have multiple
commands on one line if you properly terminate them with a ';', but it's better
if you don't, since it is not certain just whether the scripting engine will
behave nicely if you do.
-------------------------
From here on, we will have the commands sorted as follow:
1.- Basic commands.
2.- Information-retrieving commands.
3.- Checking commands.
4.- Player-related commands.
5.- Mob / NPC -related commands.
6.- Other commands.
7.- Instance commands.
8.- Quest Log commands.
9.- Battleground commands.
10.- Mercenary commands.
=====================
|1.- Basic commands.|
=====================
---------------------------------------
*mes "<string>";
This command will displays a box on the screen for the invoking character, if no
such box is displayed already, and will print the string specified into that
box. There is normally no 'close' or 'next' button on this box, unless you
create one with 'close' or 'next', and while it's open the player can't do much
else, so it's important to create a button later. If the string is empty, it
will show up as an empty line.
mes "Text that will appear in the box";
Inside the string you may put color codes, which will alter the color of the
text printed after them. The color codes are all '^<R><G><B>' and contain three
hexadecimal numbers representing colors as if they were HTML colors - ^FF0000 is
bright red, ^00FF00 is bright green, ^0000FF is bright blue, ^000000 is black.
^FF00FF is a pure magenta, but it's also a color that is considered transparent
whenever the client is drawing windows on screen, so printing text in that color
will have kind of a weird effect. Once you've set a text's color to something,
you have to set it back to black unless you want all the rest of the text be in
that color:
mes "This is ^FF0000 red ^000000 and this is ^00FF00 green, ^000000 so.";
Notice that the text coloring is handled purely by the client. If you use non-
english characters, the color codes might get screwed if they stick to letters
with no intervening space. Separating them with spaces from the letters on
either side solves the problem.
---------------------------------------
*next;
This command will display a 'next' button in the message window for the
invoking character. Clicking on it will cause the window to clear and display
a new one. Used to segment NPC-talking, next is often used in combination with
'mes' and 'close'.
If no window is currently on screen, one will be created, but once the invoking
character clicks on it, a warning is thrown on the server console and the script
will terminate.
mes "[Woman]";
mes "This would appear on the page";
next;
// This is needed cause it is a new page and the top will now be blank
mes "[Woman]";
mes "This would appear on the 2nd page";
---------------------------------------
*close;
This command will create a 'close' button in the message window for the invoking
character. If no window is currently on screen, the script execution will end. This is one
of the ways to end a speech from an NPC. Once the button is clicked, the NPC
script execution will end, and the message box will disappear.
mes "[Woman]";
mes "I am finished talking to you, click the close button";
close;
mes "This command will not run at all, cause the script has ended.";
---------------------------------------
*close2;
This command will create a 'close' button in the message window for the invoking
character. WARNING: If no window is currently on screen, the script execution will halt
indefinitely! See 'close'. There is one important difference, though - even though
the message box will have closed, the script execution will not stop, and commands after
'close2' will still run, meaning an 'end' has to be used to stop the script, unless you
make it stop in some other manner.
mes "[Woman]";
mes "I will warp you now";
close2;
warp "place",50,50;
end;
Don't expect things to run smoothly if you don't make your scripts 'end'.
---------------------------------------
*end;
This command will stop the execution for this particular script. The two
versions are perfectly equivalent. It is the normal way to end a script which
does not use 'mes'.
if (BaseLevel<=10) goto L_Lvl10;
if (BaseLevel<=20) goto L_Lvl20;
if (BaseLevel<=30) goto L_Lvl30;
if (BaseLevel<=40) goto L_Lvl40;
if (BaseLevel<=50) goto L_Lvl50;
if (BaseLevel<=60) goto L_Lvl60;
if (BaseLevel<=70) goto L_Lvl70;
L_Lvl10:
npctalk "Look at that you are still a n00b";
end;
L_Lvl20:
npctalk "Look at that you are getting better, but still a n00b";
end;
L_Lvl30:
npctalk "Look at that you are getting there, you are almost 2nd profession now right???";
end;
L_Lvl40:
npctalk "Look at that you are almost 2nd profession";
end;
Without the use if 'end' it would travel through the labels until the end of the
script. If you were lvl 10 or less, you would see all the speech lines, the use
of 'end' stops this, and ends the script.
---------------------------------------
*set <variable>,<expression>;
*set(<variable>,<expression>)
This command will set a variable to the value that the expression results in.
This is the only way to set a variable directly.
This is the most basic script command and is used a lot whenever you try to do
anything more advanced than just printing text into a message box.
set @x,100;
will make @x equal 100.
set @x,1+5/8+9;
will compute 1+5/8+9 (which is, surprisingly, 10 - remember, all numbers are
integer in this language) and make @x equal it.
Returns the variable reference (since trunk r12870).
---------------------------------------
*setd "<variable name>",<value>;
Works almost identical as set, just that the variable name is identified as a string,
thus can be constructed dynamically.
This command is equivalent to:
set getd("variable name"),<value>;
Example:
set $var$, "Poring";
setd "$var$", "Poporing";
mes $var$; // Will return Poporing
setd "$" + $var$ + "123$", "Poporing is cool";
mes $Poporing123$; // Will return Poporing is cool.
---------------------------------------
*getd("<variable name>")
Returns a reference to a variable, the name can be constructed dynamically.
Refer to setd for usage.
Example:
set getd("$varRefence"), 1;
set @i, getd("$pikachu");
---------------------------------------
*getvariableofnpc(<variable>,"<npc name>")
Returns a reference to a NPC variable (. prefix) from the target NPC.
This can only be used to get . variables.
Example(s):
//This will return the value of .var, note that this can't be used, since the value isn't caught.
getvariableofnpc(.var,"TargetNPC");
//This will set the .v variable to the value of the TargetNPC's .var variable.
set .v,getvariableofnpc(.var,"TargetNPC");
//This will set the .var variable of TargetNPC to 1.
set getvariableofnpc(.var,"TargetNPC"),1;
Note: even though function objects can have .variables,
getvariableofnpc will not work on them.
---------------------------------------
*goto <label>;
This command will make the script jump to a label, usually used in conjunction
with other command, such as "if", but often used on it's own.
...
goto Label;
mes "This will not be seen";
Label:
mes "This will be seen";
Note by FlavioJS: goto's are "evil" and should be avoided if possible (ò_ó)
---------------------------------------
*menu "<option_text>",<target_label>{,"<option_text>",<target_label>,...};
This command will create a selectable menu for the invoking character. Only one
menu can be on screen at the same time.
Depending on what the player picks from the menu, the script execution will
continue from the corresponding label. (it's string-label pairs, not label-
string)
Options can be grouped together, separated by the character ':'.
menu "A:B",L_Wrong,"C",L_Right;
It also sets a special temporary character variable @menu, which contains the
number of option the player picked. (Numbering of options starts at 1.)
This number is consistent with empty options and grouped options.
menu "A::B",L_Wrong,"",L_Impossible,"C",L_Right;
L_Wrong:
// If they click "A" or "B" they will end up here
// @menu == 1 if "A"
// @menu == 2 will never happen because the option is empty
// @menu == 3 if "B"
L_Impossible:
// Empty options are not displayed and therefore can't be selected
// this label will never be reached from the menu command
L_Right:
// If they click "C" they will end up here
// @menu == 5
If a label is '-', the script execution will continue right after the menu
command if that option is selected, this can be used to save you time, and
optimize big scripts.
menu "A::B:",-,"C",L_Right;
// If they click "A" or "B" they will end up here
// @menu == 1 if "A"
// @menu == 3 if "B"
L_Right:
// If they click "C" they will end up here
// @menu == 5
Both these examples will perform the exact same task.
If you give an empty string as a menu item, the item will not display. This
can effectively be used to script dynamic menus by using empty string for
entries that should be unavailable at that time.
You can do it by using arrays, but watch carefully - this trick isn't high
wizardry, but minor magic at least. You can't expect to easily duplicate it
until you understand how it works.
Create a temporary array of strings to contain your menu items, and populate it
with the strings that should go into the menu at this execution, making sure not
to leave any gaps. Normally, you do it with a loop and an extra counter, like
this:
setarray @possiblemenuitems$[0],<list of potential menu items>;
set @j,0; // That's the menu lines counter.
// We loop through the list of possible menu items.
// @i is our loop counter.
for( set @i,0; @i<getarraysize(@possiblemenuitems$) ; set @i,@i+1 )
{
// That 'condition' is whatever condition that determines whether
// a menu item number @i actually goes into the menu or not.
if (<condition>)
{
// We record the option into the list of options actually available.
set @menulist$[@j],@possiblemenuitems$[@i];
// We just copied the string, we do need it's number for later
// though, so we record it as well.
set @menureference[@j],@i;
// Since we've just added a menu item into the list, we increment
// the menu lines counter.
set @j,@j+1;
}
// We go on to the next possible menu item.
}
This will create you an array @menulist$ which contains the text of all items
that should actually go into the menu based on your condition, and an array
@menureference, which contains their numbers in the list of possible menu items.
(Remember, arrays start with 0.) There's less of them than the possible menu
items you've defined, but the menu command can handle the empty lines - only if
they are last in the list, and if it's made this way, they are. Now comes a
dirty trick:
// X is whatever the most menu items you expect to handle.
menu @menulist$[0],-,@menulist$[1],-,....@menulist$[<X>],-;
This calls up a menu of all your items. Since you didn't copy some of the
possible menu items into the list, it's end is empty and so no menu items will
show up past the end. But this menu call doesn't jump anywhere, it just
continues execution right after the menu command. (And it's a good thing it
doesn't, cause you can only explicitly define labels to jump to, and how do you
know which ones to define if you don't know beforehand which options will end up
where in your menu?)
But how do you figure out which option the user picked? Enter the @menu.
@menu contains the number of option that the user selected from the list,
starting with 1 for the first option. You know now which option the user picked
and which number in your real list of possible menu items it translated to:
mes "You selected "+@possiblemenuitems$[@menureference[@menu-1]]+"!";
@menu is the number of option the user picked.
@menu-1 is the array index for the list of actually used menu items that we
made.
@menureference[@menu-1] is the number of the item in the array of possible menu
items that we've saved just for this purpose.
And @possiblemenuitems$[@menureference[@menu-1]] is the string that we used to
display the menu line the user picked. (Yes, it's a handful, but it works.)
You can set up a bunch of 'if (@menureference[@menu-1]==X) goto Y' statements to
route your execution based on the line selected and still generate a different
menu every time, which is handy when you want to, for example, make users select
items in any specific order before proceeding, or make a randomly shuffled menu.
Kafra code bundled with the standard distribution uses a similar array-based
menu technique for teleport lists, but it's much simpler and doesn't use @menu,
probably since that wasn't documented anywhere.
See also 'select', which is probably better in this particular case. Instead of
menu, you could use 'select' like this:
set @dummy,select(@menulist$[0],@menulist$[1],....@menulist$[<X>]);
For the purposes of the technique described above these two statements are
perfectly equivalent.
---------------------------------------
*select("<option>"{,"<option>",...})
*prompt("<option>"{,"<option>",...})
This function is a handy replacement for 'menu' for some specific cases where
you don't want a complex label structure - like, for example, asking simple yes-
no questions. It will return the number of menu option picked, starting with 1.
Like 'menu', it will also set the variable @menu to contain the option the user
picked.
if (select("Yes:No")==1) mes "You said yes, I know.";
And like 'menu', the selected option is consistent with grouped options
and empty options.
prompt works almost the same as select, except that when a character clicks
the Cancel button, this function will return 255 instead.
---------------------------------------
*input(<variable>{,<min>{,<max>}})
This command will make an input box pop up on the client connected to the
invoking character, to allow entering of a number or a string. This has many
uses, one example would be a guessing game, also making use of the 'rand'
function:
mes "[Woman]";
mes "Try and guess the number I am thinking of.";
mes "The number will be between 1 and 10.";
next;
set @number, rand(1,10);
input @guess;
if(@guess==@number)
{
mes "[Woman]";
mes "Well done that was the number I was thinking of";
close;
}
else
{
mes "[Woman]";
mes "Sorry, that wasn't the number I was thinking of.";
close;
}
If you give the input command a string variable to put the input in, it will
allow the player to enter text. Otherwise, only numbers will be allowed.
mes "[Woman]";
mes "Please say HELLO";
next;
input @var$;
if(@var$=="HELLO")
{
mes "[Woman]";
mes "Well done you typed it correctly";
close;
}
else
{
mes "[Woman]";
mes "Sorry you got it wrong";
close;
}
Normally you may not input a negative number with this command.
This is done to prevent exploits in badly written scripts, which would
let people, for example, put negative amounts of Zeny into a bank script and
receive free Zeny as a result.
Since trunk r12192 the command has two optional arguments and a return value.
The default value of 'min' and 'max' can be set with 'input_min_value' and
'input_max_value' in script_athena.conf.
For numeric inputs the value is capped to the range [min,max]. Returns 1 if
the value was higher than 'max', -1 if lower than 'min' and 0 otherwise.
For string inputs it returns 1 if the string was longer than 'max', -1 is
shorter than 'min' and 0 otherwise.
---------------------------------------
*callfunc "<function>"{,<argument>,...<argument>};
*callfunc("<function>"{,<argument>,...<argument>})
This command lets you call up a function NPC. A function NPC can be called from
any script on any map server. Using the 'return' command it will come back to
the place that called it.
place,50,50,6%TAB%script%TAB%Woman%TAB%115,{
mes "[Woman]"
mes "Lets see if you win";
callfunc "funcNPC";
mes "Well done you have won";
close;
}
function%TAB%script%TAB%funcNPC%TAB%{
set @win, rand(2);
if(@win==0) return;
mes "Sorry you lost";
end;
}
You can pass arguments to your function - values telling it what exactly to do -
which will be available there with getarg() (see 'getarg')
Notice that returning is not mandatory, you can end execution right there.
If you want to return a real value from inside your function NPC, it is better
to write it in the function form, which will also work and will make the script
generally cleaner:
place,50,50,6%TAB%script%TAB%Man%TAB%115,{
mes "[Man]"
mes "Gimme a number!";
next;
input @number;
if (callfunc("OddFunc",@number)) mes "It's Odd!";
close;
}
function%TAB%script%TAB%OddFunc%TAB%{
if (getarg(0)%2==0) return 0;// it's even
return 1;// it's odd
}
---------------------------------------
*callsub <label>{,<argument>,...<argument>};
*callsub(<label>{,<argument>,...<argument>})
This command will go to a specified label within the current script (do NOT use
quotes around it) coming in as if it were a 'callfunc' call, and pass it
arguments given, if any, which can be recovered there with 'getarg'. When done
there, you should use the 'return' command to go back to the point from where
this label was called. This is used when there is a specific thing the script
will do over and over, this lets you use the same bit of code as many times as
you like, to save space and time, without creating extra NPC objects which are
needed with 'callfunc'. A label is not callable in this manner from another
script.
Example 1: callsub for checking (if checks pass, return to script)
callsub S_CheckFull, "guild_vs2",50;
switch( rand(4) ) {
case 0: warp "guild_vs2",9,50; end;
case 1: warp "guild_vs2",49,90; end;
case 2: warp "guild_vs2",90,50; end;
case 3: warp "guild_vs2",49,9; end;
}
...
S_CheckFull:
if (getmapusers(getarg(0)) >= getarg(1)) {
mes "I'm sorry, this arena is full. Please try again later.";
close;
}
return;
Example 2: callsub used repeatedly, with different arguments
// notice how the Zeny check/delete is reused, instead of copy-pasting for every warp
switch(select("Abyss Lake:Amatsu Dungeon:Anthell:Ayothaya Dungeon:Beacon Island, Pharos") {
case 1: callsub S_DunWarp,"hu_fild05",192,207;
case 2: callsub S_DunWarp,"ama_in02",119,181;
case 3: callsub S_DunWarp,"moc_fild20",164,145;
case 4: callsub S_DunWarp,"ayo_fild02",279,150;
case 5: callsub S_DunWarp,"cmd_fild07",132,125;
// etc
}
...
S_DunWarp:
// getarg(0) = "mapname"
// getarg(1) = x
// getarg(2) = y
if (Zeny >= 100) {
set Zeny, Zeny-100;
warp getarg(0),getarg(1),getarg(2);
} else {
mes "Dungeon warp costs 100 Zeny.";
}
close;
---------------------------------------
*getarg(<index>{,<default_value>})
This function is used when you use the 'callsub' or 'callfunc' commands. In the
call you can specify variables that will make that call different from another
one. This function will return an argument the function or subroutine was
called with, and is the normal way to get them.
This is another thing that can let you use the same code more than once.
Argument numbering starts with 0, i.e. the first argument you gave is number 0.
If no such argument was given, a zero is returned.
place,50,50,6%TAB%script%TAB%Woman1%TAB%115,{
mes "[Woman]";
mes "Lets see if you win";
callfunc "funcNPC",2;
mes "Well done you have won";
...
place,52,50,6%TAB%script%TAB%Woman2%TAB%115,{
mes "[Woman]";
mes "Lets see if you win";
callfunc "funcNPC",5;
mes "Well done you have won";
...
function%TAB%script%TAB%funcNPC%TAB%{
set @win, rand(getarg(0));
if(@win==0) return;
mes "Sorry you lost";
"woman1" NPC object calls the funcNPC. The argument it gives in this call is
stated as 2, so when the random number is generated by the 'rand' function, it
can only be 0 or 1. Whereas "woman2" gives 5 as the argument number 0 when
calling the function, so the random number could be 0, 1, 2, 3 or 4, this makes
"woman2" less likely to say the player won.
You can pass multiple arguments in a function call:
callfunc "funcNPC",5,4,3;
getarg(0) would be 5, getarg(1) would be 4 and getarg(2) would be 3.
Getarg has an optional argument since trunk r10773 and stable r10958.
If the target argument exists, it is returned.
Otherwise, if <default_value> is present it is returned instead,
if not the script terminates immediately.
in the previous example getarg(2,-1) would be 3 and getarg(3,-1) would be -1
---------------------------------------
*return {<value>};
This command causes the script execution to leave previously called function
with callfunc or script with callsub and return to the location, where the call
originated from. Optionally a return value can be supplied, when the call was
done using the function form.
Using this command outside of functions or scripts referenced by callsub will
result in error and termination of the script.
callfunc "<your function>";// when nothing is returned
set <variable>,callfunc("<your function>");// when a value is being returned
---------------------------------------
*function <function name>;
*<function name>;
*function <function name> {
<code>
}
(Skotlex stop being so selfish and give us all the commands T~T! J/k lol :P)
This works like callfunc. It's used for cleaner and fast scripting. Also they
must be inside a script. They're not separated scripts and they work more like
labels with arguments.
Note it looks like the normal declaration
Usage:
You first Declare the function with function <function name>;.
Put the rest of your code. You can use then <function name>; to call the
function. It can also return a value when used with parentheses.
And at last, but inside the script itself, put the function <function name> {<code>}.
Example:
prontera,154,189,4 script Item seller 767,{
function SF_Selling;
mes "I'll open this now if you have more than 50z and you are level 50 or bigger";
next;
if (Zeny > 50) && (BaseLevel > 50) {
mes "Welcome";
next;
SF_Selling;
close;
} else
set @needed,50-BaseLevel;
mes "You either are Level "+BaseLevel+", thus you need "+@needed+" more levels";
mes "to be able to use this NPC; or you don't have enough Zeny, so get some please";
close;
function SF_Selling {
mes "Would you like to buy a phracon for 50z?";
switch(select("Yes","No, thanks")) {
case 1:
mes "Ok, how many?";
input @quantity;
set @check,Zeny/50;
if (@quantity > @check) {
mes "Sorry but you can only have "+@check+" Phracons with "+Zeny;
close;
} else
next;
mes "here you have";
set Zeny,Zeny-@quantity*50;
getitem 1010,@quantity;
close;
case 2:
mes "Good bye then";
close;
}
}
return;
}
Example with parameters and return value:
prontera,150,150,0 script TestNPC 123,{
function MyAdd;
mes "Enter two numbers.";
next;
input .@a;
input .@b;
mes .@a+" + "+.@b+" = "+MyAdd(.@a,.@b);
close;
function MyAdd
{
return getarg(0)+getarg(1);
}
}
---------------------------------------
*if (<condition>) <statement>;
This is the basic conditional statement command, and just about the only one
available in this scripting language.
The condition can be any expression. All expressions resulting in a non-zero
value will be considered True, including negative values. All expressions
resulting in a zero are false.
If the expression results in True, the statement will be executed. If it isn't
true, nothing happens and we move on to the next line of the script.
if (1) mes "This will always print.";
if (0) mes "And this will never print.";
if (5) mes "This will also always print.";
if (-1) mes "Funny as it is, this will also print just fine.";
For more information on conditional operators see the operators section above.
Anything that is returned by a function can be used in a condition check without
bothering to store it in a specific variable:
if (strcharinfo(0)=="Daniel Jackson") mes "It is true, you are Daniel!";
More examples of using the 'if' command in the real world:
Example 1:
set @var1,1;
input @var2;
if(@var1==@var2) goto L_Same;
mes "Sorry that is wrong";
close;
L_Same:
close;
Example 2:
set @var1,1;
input @var2;
if(@var1!=@var2) mes "Sorry that is wrong";
close;
(Notice examples 1 and 2 have the same effect.)
Example 3:
set @var1,@var1+1;
mes "[Forgetfull Man]";
if (@var==1) mes "This is the first time you have talked to me";
if (@var==2) mes "This is the second time you have talked to me";
if (@var==3) mes "This is the third time you have talked to me";
if (@var==4) mes "This is the forth time you have talked to me, but I think I am getting amnesia, I have forgotten about you";
if (@var==4) set @var,0;
close;
Example 4:
mes "[Quest Person]";
if(countitem(512)>=1) goto L_GiveApple;
// The number 512 was found from item_db, it is the item number for the Apple.
mes "Can you please bring me an apple?";
close;
L_GiveApple:
mes "Oh an apple, I didn't want it, I just wanted to see one";
close;
Example 5:
mes "[Person Checker]";
if($name$!=null) goto L_Check;
mes "Please tell me someones name";
next;
input $name$;
set $name2$,strcharinfo(0);
mes "[Person Checker]";
mes "Thank you";
L_Check:
if($name$==strcharinfo(0) ) goto L_SameName;
mes "[Person Checker]";
mes "You are not the person that " +$name2$+ " mentioned";
L_End:
set $name$,null;
set $name2$,null;
close;
L_SameName:
mes "[Person Checker]";
mes "You are the person that " +$name2$+ " just mentioned";
mes "nice to meet you";
goto L_End;
See 'strcharinfo' for explanation of what this function does.
Example 6: Using complex conditions.
mes "[Multi Checker]";
if( (@queststarted==1) && (countitem(512)>=5) ) goto L_MultiCheck;
// Only if the quest has been started AND You have 5 apples will it goto "L_MultiCheck"
mes "Please get me 5 apples";
set @queststarted,1;
close;
L_MultiCheck:
mes "[Multi Checker]";
mes "Well done you have started the quest of got me 5 apples";
mes "Thank you";
set @queststarted,0;
delitem 512,5;
close;
With the Advanced scripting engine, we got nested if's. That is:
if (<condition>)
dothis;
else
dothat;
If the condition doesn't meet, it'll do the action following the else.
We can also group several actions depending on a condition, the following way:
if (<condition)
{
dothis1;
dothis2;
dothis3;
} else {
dothat1;
dothat2;
dothat3;
dothat4;
}
Remember that if you plan to do several actions upon the condition being false, and
you forget to use the curly braces (the { } ), the second action will be executed regardless
the output of the condition, unless of course, you stop the execution of the script if the
condition is true (that is, in the first grouping using a return; , and end; or a close; )
Also, you can have multiple conditions nested or chained, and don't worry about limits as to
how many nested if you can have, there is no spoon ;)
...
if (<condition 1>)
dothis;
else if (<condition 2>)
{
dotheother;
do that;
end;
} else
do this;
...
---------------------------------------
*jump_zero (<condition>),<label>;
This command works kinda like an 'if'+'goto' combination in one go. (See 'if').
If the condition is false (equal to zero) this command will immediately jump to
the specified label like in 'goto'. While 'if' is more generally useful, for
some cases this could be an optimization.
The main reason for this command is that other control statements, like
'switch', 'for' or 'while', are disassembled into simple expressions together
with this command when a script is parsed.
---------------------------------------
*while (<condition>) <statement>;
This is probably the simplest and most frequently used loop structure. The 'while'
statement can be interpreted as "while <condition> is true, perform <statement>".
It is a pretest loop, meaning the conditional expression is tested before any of the
statements in the body of the loop are performed. If the condition evaluates to
false, the statement(s) in the body of the loop is/are never executed. If the
condition evaluates to true, the statement(s) are executed, then control transfers
back to the conditional expression, which is reevaluated and the cycle continues.
Multiple statements can be grouped with { }, curly braces, just like with the 'if' statement.
Example 1:
while (switch(select("Yes:No") == 2 ))
mes "You picked no.";
Example 2: multiple statements
while (switch(select("Yes:No") == 2 )) {
mes "Why did you pick no?";
mes "You should pick yes instead!";
}
Example 3: counter-controlled loop
set .@i, 1;
while (.@i <= 5) {
mes "This line will print 5 times.";
set .@i, .@i +1;
}
Example 4: sentinel-controlled loop
mes "Input 0 to stop";
input .@num;
while (.@num != 0) {
mes "You entered " + .@num;
input .@num;
}
close;
---------------------------------------
*for (<variable initialization>; <condition>; <variable update>) <statement>;
Another pretest looping structure is the 'for' statement. It is considered a
specialized form of the 'while' statement, and is usually associated with counter-
controlled loops. Here are the steps of the 'for' statement: the initialize
statement is executed first and only once. The condition test is performed.
When the condition evaluates to false, the rest of the for statement is skipped.
When the condition evaluates to true, the body of the loop is executed, then the
update statement is executed (this usually involves incrementing a variable).
Then the condition is reevaluated and the cycle continues.
Example 1:
for( set .@i, 1; .@i <= 5; set .@i, .@i +1 )
mes "This line will print 5 times.";
Example 2:
mes "This will print the numbers 1 - 5.";
for( set .@i, 1; .@i <= 5; set .@i, .@i +1 )
mes .@i;
---------------------------------------
*do { <statement>; } while (<condition>);
The 'do...while' is the only post-test loop structure available in this script
language. With a post-test, the statements are executed once before the condition
is tested. When the condition is true, the statement(s) are repeated. When the
condition is false, control is transferred to the statement following the
'do...while' loop expression.
Example 1: sentinel-controlled loop
mes "This menu will keep appearing until you pick Cancel";
do {
set .@menu, select("One:Two:Three:Cancel");
} while (.@menu != 4);
Example 2: counter-controlled loop
mes "This will countdown from 10 to 1.";
set .@i, 10;
do {
mes .@i;
set .@i, .@i - 1;
} while (.@i > 0);
---------------------------------------
*setarray <array name>[<first value>],<value>{,<value>...<value>};
This command will allow you to quickly fill up an array in one go. Check the
Kafra scripts in the distribution to see this used a lot.
setarray @array[0], 100, 200, 300, 400, 500, 600;
First value is the index of the first element of the array to alter. For
example:
setarray @array[0],200,200,200;
setarray @array[1],300,150;
will produce:
@array[0]=200
@array[1]=300
@array[2]=150
---------------------------------------
*cleararray <array name>[<first value to alter>],<value>,<number of values to set>;
This command will change many array values at the same time to the same value.
setarray @array[0], 100, 200, 300, 400, 500, 600;
// This will make all 6 values 0
cleararray @array[0],0,6;
// This will make array element 0 change to 245
cleararray @array[0],245,1;
// This will make elements 1 and 2 change to 345
cleararray @array[1],345,2;
See 'setarray'.
---------------------------------------
*copyarray <destination array>[<first value>],<source array>[<first value>],<amount of data to copy>;
This command lets you quickly shuffle a lot of data between arrays, which is in
some cases invaluable.
setarray @array[0], 100, 200, 300, 400, 500, 600;
// So we have made @array[]
copyarray @array2[0],@array[2],2;
// Now, @array2[0] will be equal to @array[2] (300) and
// @array2[1] will be equal to @array[3].
So using the examples above:
@array[0] = 100
@array[1] = 200
@array[2] = 300
@array[3] = 400
@array[4] = 500
@array[5] = 600
New Array:
@array2[0] = 300
@array2[1] = 400
@array2[2] = 0
@array2[3] = 0
Notice that @array[4] and @array[5] won't be copied to the second array, and it will return a
0.
---------------------------------------
*deletearray <array name>[<first value>],<how much to delete>;
This command will delete a specified number of array elements totally from an
array, shifting all the elements beyond this towards the beginning.
// This will delete array element 0, and move all the other array elements
// up one place.
deletearray @array[0],1
// This would delete array elements numbered 1, 2 and 3, leave element 0 in its
// place, and move the other elements ups, so there are no gaps.
deletearray @array[1],3
---------------------------------------
======================================
|2.- Information-retrieving commands.|
======================================
---------------------------------------
*strcharinfo(<type>)
This function will return either the name, party name or guild name for the
invoking character. Whatever it returns is determined by type.
0 - Character's name.
1 - The name of the party they're in if any.
2 - The name of the guild they're in if any.
3 - The name of the map the character is in.
If a character is not a member of any party or guild, an empty string will be
returned when requesting that information.
---------------------------------------
*strnpcinfo(<type>)
This function will return the various parts of the name of the calling NPC.
Whatever it returns is determined by type.
0 - The NPC's display name (visible#hidden)
1 - The visible part of the NPC's display name
2 - The hidden part of the NPC's display name
3 - The NPC's unique name (::name)
4 - The name of the map the NPC is in.
---------------------------------------
*getarraysize(<array name>)
This function returns the number of values that are contained inside the
specified array. Notice that zeros and empty strings at the end of this array
are not counted towards this number.
For example:
setarray @array[0], 100, 200, 300, 400, 500, 600;
set @arraysize,getarraysize(@array);
This will make @arraysize == 6. But if you try this:
setarray @array[0], 100, 200, 300, 400, 500, 600, 0;
set @arraysize,getarraysize(@array);
@arraysize will still equal 6, even though you've set 7 values.
---------------------------------------
*getelementofarray(<array name>,<index>)
This command retrieves the value of the element of given array at given index.
This is equivalent to using:
<array name>[<index>]
The reason for this is, that this short form is internally converted into a call
to getelementofarray, when the script is loaded.
Also useful when passing arrays to functions or accessing another npc's arrays:
getelementofarray(getarg(0),<index>)
getelementofarray(getvariableofnpc(.var, "testNPC"),<index>)
---------------------------------------
*readparam(<parameter number>)
This function will return the basic stats of an invoking character, referred to
by the parameter number. Instead of a number, you can use a parameter name if it
is defined in "db/const.txt".
For reference, in there these things are defined:
StatusPoint, BaseLevel, SkillPoint, Class, Upper, Zeny, Sex, Weight, MaxWeight,
JobLevel, BaseExp, JobExp, NextBaseExp, NextJobExp, Hp, MaxHp, Sp, MaxSp,
BaseJob, Karma, Manner, bVit, bDex, bAgi, bStr, bInt, bLuk
All of these also behave as variables, but don't expect to be able to just 'set'
all of them - some will not work for various internal reasons.
// This would return how many status points you haven't spent yet
readparam(9)
Using this particular information as a function call is not required. Just
putting
StatusPoint
will give you the same result, and some of these parameters work just like
variables (i.e. you can 'set Zeny,100' to make the character have 100 Zeny,
destroying whatever Zeny they had before, or 'set Zeny,Zeny+100' to give them
100 Zeny)
You can also use this command to get stat values:
readparam(bVit)
if(readparam(bVit)<=77) goto L_End;
mes "Only people with over 77 Vit are reading this";
L_End:
close;
---------------------------------------
*getcharid(<type>{,"<character name>"})
This function will return a unique ID number of the invoking character, or, if a
character name is specified, of that character.
Type is the kind of associated ID number required:
0 - Character ID number.
1 - Party ID number.
2 - Guild ID number.
3 - Account ID number.
4 - Battle ground ID
For most purposes other than printing it, a number is better to have than a name
(people do horrifying things to their character names).
If the character is not in a party or not in a guild, the function will return 0
if guild or party number is requested. If a name is specified and the character
is not found, 0 is returned.
If getcharid(0) returns a zero, the script got called not by a character and
doesn't have an attached RID. Note that this will cause the map server to
print "player not attached!" error messages, so it is preferred to use
"playerattached" to check for the character attached to the script.
if( getcharid(2) == 0 ) mes "Only members of a guild are allowed here!";
---------------------------------------
*getchildid()
*getmotherid()
*getfatherid()
These functions return the characters (child/mother/father) ID
if (getmotherid()) mes "Oh... I know your mother's ID:"+getmotherid();
---------------------------------------
*ispartneron()
This function returns 1 if the invoking character's marriage partner is
currently online and 0 if they are not or if the character has no partner.
---------------------------------------
*getpartnerid()
This function returns the character ID of the invoking character's marriage
partner, if any. If the invoking character is not married, it will return 0,
which is a quick way to see if they are married:
if (getpartnerid()) mes "I'm not going to be your girlfriend!";
if (getpartnerid()) mes "You're married already!";
---------------------------------------
*getpartyname(<party id>)
This function will return the name of a party that has the specified ID number.
If there is no such party ID, "null" will be returned.
Lets say the ID of a party was saved as a global variable:
// This would return the name of the party from the ID stored in a variable
mes "You're in the '"+getpartyname($@var)"' party, I know!";
---------------------------------------
*getpartymember <party id>{,<type>};
Thank you to HappyDenn for all this information.
This command will find all members of a specified party and returns their names
(or character id or account id depending on the value of "type") into an array
of temporary global variables. There's actually quite a few commands like this
which will fill a special variable with data upon execution and not do anything
else.
Upon executing this,
$@partymembername$[] is a global temporary string array which contains all the
names of these party members
(only set when type is 0 or not specified)
$@partymembercid[] is a global temporary number array which contains the
character id of these party members.
(only set when type is 1)
$@partymemberaid[] is a global temporary number array which contains the
account id of these party members.
(only set when type is 2)
$@partymembercount is the number of party members that were found.
The party members will (apparently) be found regardless of whether they are
online or offline. Note that the names come in no particular order.
Be sure to use $@partymembercount to go through this array, and not
'getarraysize', because it is not cleared between runs of 'getpartymember'. If
someone with 7 party members invokes this script, the array would have 7
elements. But if another person calls up the NPC, and he has a party of 5, the
server will not clear the array for you, overwriting the values instead. So in
addition to returning the 5 member names, the 6th and 7th elements from the last
call remain, and you will get 5+2 members, of which the last 2 don't belong to
the new guy's party. $@partymembercount will always contain the correct number,
(5) unlike 'getarraysize()' which will return 7 in this case.
Example:
// get the character's party ID
getpartymember(getcharid(1));
// immediately copy $@partymembercount value to a new variable, since
// you don't know when 'getpartymember' will get called again for someone
// else's party, overwriting your global array.
set @partymembercount,$@partymembercount;
// copy $@partymembername array to a new array
copyarray @partymembername$[0],$@partymembername$[0],@partymembercount;
//list the party members in NPC dialog
set @count,0;
L_DisplayMember:
if(@count == @partymembercount) goto L_DisplayMemberEnd;
mes (@count + 1) + ". ^0000FF" + @partymembername$[@count] + "^000000";
set @count,@count+1;
goto L_DisplayMember;
L_DisplayMemberEnd:
close;
---------------------------------------
*getpartyleader(<party id>{,<type>})
This function returns some information about the given party-id's leader.
When type is omitted, the default information retrieved is the leader's name.
Possible types are:
1: Leader account id
2: Leader character id
3: Leader's class
4: Leader's current map name
5: Leader's current level as stored on the party structure (may not be
current level if leader leveled up recently).
If retrieval fails (leader not found or party does not exist), this function
returns "null" instead of the character name, and -1 for the other types.
---------------------------------------
*getlook(<type>)
This function will return the number for the current character look value
specified by type. See 'setlook' for valid look types.
This can be used to make a certain script behave differently for characters
dressed in black. :)
---------------------------------------
*getsavepoint(<information type>)
This function will return information about the invoking character's save point.
You can use it to let a character swap between several recorded save points.
Available information types are:
0 - Map name (a string)
1 - X coordinate
2 - Y coordinate
---------------------------------------
\\
2,2 Item-related commands
\\
---------------------------------------
*getequipid(<equipment slot>)
This function returns the item ID of the item equipped in the equipment slot
specified on the invoking character. If nothing is equipped there, it returns -1.
Valid equipment slots are:
EQI_HEAD_TOP (1) - Upper head gear
EQI_ARMOR (2) - Armor (Where you keep your Jackets and Robes)
EQI_HAND_L (3) - What is in your Left hand.
EQI_HAND_R (4) - What is in your Right hand.
EQI_GARMENT (5) - The garment slot (Mufflers, Hoods, Manteaus)
EQI_SHOES (6) - What foot gear the player has on.
EQI_ACC_L (7) - Accessory 1.
EQI_ACC_R (8) - Accessory 2.
EQI_HEAD_MID (9) - Middle Headgear (masks and glasses)
EQI_HEAD_LOW (10) - Lower Headgear (beards, some masks)
Notice that a few items occupy several equipment slots, and if the character is
wearing such an item, 'getequipid' will return it's ID number for either slot.
Can be used to check if you have something equipped, or if you haven't got
something equipped:
if(getequipid(EQI_HEAD_TOP)==2234) goto L_WearingTiara;
mes "Come back when you have a Tiara on";
close;
L_WearingTiara:
mes "What a lovely Tiara you have on";
close;
You can also use it to make sure people don't pass a point before removing an
item totally from them. Let's say you don't want people to wear Legion Plate
armor, but also don't want them to equip if after the check, you would do this:
if ((getequipid(EQI_ARMOR) == 2341) || (getequipid(EQI_ARMOR) == 2342) goto L_EquipedLegionPlate;
// the || is used as an or argument, there is 2341 and 2342 cause there are
// two different legion plate armors, one with a slot one without.
if ((countitem(2341) > 0) || (countitem(2432) > 0) goto L_InventoryLegionPlate;
mes "I will lets you pass";
close2;
warp "place",50,50;
end;
L_EquipedLegionPlate:
mes "You are wearing some Legion Plate Armor, please drop that in your stash before continuing";
close;
L_InventoryLegionPlate:
mes "You have some Legion Plate Armor in your inventory, please drop that in your stash before continuing";
close;
---------------------------------------
*getequipname(<equpment slot>)
Returns the jname of the item equipped in the specified equipment slot on the
invoking character, or an empty string if nothing is equipped in that position.
Does the same thing as getitemname(getequipid()). Useful for an NPC to state
what your are wearing, or maybe saving as a string variable.
See 'getequipid' for a full list of valid equipment slots.
if( getequipname(EQI_HEAD_TOP) != "" )
mes "So you are wearing a "+getequipname(EQI_HEAD_TOP)+" on your head";
else
mes "You are not wearing any head gear";
---------------------------------------
*getitemname(<item id>)
Given the database ID number of an item, this function will return the text
stored in the 'japanese name' field (which, in rAthena, stores an english name
the players would normally see on screen.)
---------------------------------------
*getbrokenid(<number>)
This function will search the invoking character's inventory for any broken
items, and will return their item ID numbers. Since the character may have
several broken items, 1 given as an argument will return the first one found, 2
will return the second one, etc. Will return 0 if no such item is found.
// Let's see if they have anything broken:
if (getbrokenid(1)==0) goto Skip;
// They do, so let's print the name of the first broken item:
mes "Oh, I see you have a broken "+getitemname(getbrokenid(1))+" here!";
Skip:
mes "You don't have anything broken, quit bothering me.";
---------------------------------------
*getequipisequiped(<equipment slot>)
This functions will return 1 if there is an equipment placed on the specified
equipment slot and 0 otherwise. For a list of equipment slots
see 'getequipid'. Function originally used by the refining NPCs:
if (getequipisequiped(EQI_HEAD_TOP)) goto L_equipped;
mes "[Refiner]";
mes "Do you want me to refine your dumb head?";
close;
L_equipped:
mes "[Refiner]";
mes "That's a fine hat you are wearing there...";
close;
---------------------------------------
*getequipisenableref(<equipment slot>)
Will return 1 if the item equipped on the invoking character in the specified
equipment slot is refinable, and 0 if it isn't. For a list of equipment slots
see 'getequipid'.
if (getequipisenableref(EQI_HEAD_TOP)) goto L_Refine;
mes "[Refiner]";
mes "I can't refine this hat!...";
close;
L_Refine:
mes "[Refiner]";
mes "Ok I can refine this";
close;
---------------------------------------
*getequiprefinerycnt(<equipment slot>)
Returns the current number of pluses for the item in the specified equipment
slot. For a list of equipment slots see 'getequipid'.
Can be used to check if you have reached a maximum refine value, default for
this is +10:
if(getequiprefinerycnt(EQI_HEAD_TOP) < 10) goto L_Refine_HeadGear;
mes "Sorry, it's not possible to refine hats better than +10";
close;
L_Refine_HeadGear:
mes "I will now upgrade your "+getequipname(EQI_HEAD_TOP);
---------------------------------------
*getequipweaponlv(<equipment slot>)
This function returns the weapon level for the weapon equipped in the specified
equipment slot on the invoking character. For a list of equipment slots see
'getequipid'.
Only EQI_HAND_L and EQI_HAND_R normally make sense, since only weapons
have a weapon level. You can, however, probably, use this field for other
equippable custom items as a flag or something.
If no item is equipped in this slot, or if it doesn't have a weapon level
according to the database, 0 will be returned.
switch (getequipweaponlv(EQI_HAND_R)) {
case 1: mes "You are holding a lvl 1 weapon"; break;
case 2: mes "You are holding a lvl 2 weapon"; break;
case 3: mes "You are holding a lvl 3 weapon"; break;
case 4: mes "You are holding a lvl 4 weapon"; break;
case 5: mes "You are holding a lvl 5 weapon, hm, must be a custom design"; break;
default: mes "Seems you don't have a weapon on"; break;
}
Or for the left hand, cause it can hold a weapon or a shield:
if(getequipid(EQI_HAND_R)==0) goto L_NothingEquiped;
switch (getequipweaponlv(EQI_HAND_L)) {
case 0: mes "You are holding a shield, so it doesnt have a level"; break;
case 1: mes "You are holding a lvl 1 weapon"; break;
case 2: mes "You are holding a lvl 2 weapon"; break;
case 3: mes "You are holding a lvl 3 weapon"; break;
case 4: mes "You are holding a lvl 4 weapon"; break;
case 5: mes "You are holding a lvl 5 weapon, hm, must be a custom design"; break;
}
close;
L_NothingEquiped:
mes "Seems you have nothing equipped";
close;
---------------------------------------
*getequippercentrefinery(<equipment slot>)
This function calculates and returns the percent value chance to successfully
refine the item found in the specified equipment slot of the invoking character
by +1. There is no actual formula, the success rate for a given weapon level of
a certain refine level is found in the db/refine_db.txt file. For a list of
equipment slots see 'getequipid'.
These values can be displayed for the player to see, or used to calculate the
random change of a refine succeeding or failing and then going through with it
(which is what the official NPC refinery scripts use it for)
// This will find a random number from 0 - 99 and if that is equal to or more
// than the value recoverd by this command it will go to L_Fail
if (getequippercentrefinery(EQI_HAND_L)<=rand(100)) goto L_Fail;
---------------------------------------
*getareadropitem("<map name>",<x1>,<y1>,<x2>,<y2>,<item>)
This function will count all the items with the specified ID number lying on the
ground on the specified map within the x1/y1-x2/y2 square on it and return that
number.
This is the only function around where a parameter may be either a string or a
number! If it's a number, it means that only the items with that item ID number
will be counted. If it is a string, it is assumed to mean the 'english name'
field from the item database. If you give it an empty string, or something that
isn't found from the item database, it will count items number '512' (apples).
---------------------------------------
*getequipcardcnt(<equipment slot>)
This function will return the number of cards that have been compounded onto a
specific equipped item for the invoking character. See 'getequipid' for a list
of possible equipment slots.
---------------------------------------
*getinventorylist;
This command sets a bunch of arrays with a complete list of whatever the
invoking character has in their inventory, including all the data needed to
recreate these items perfectly if they are destroyed. Here's what you get:
@inventorylist_id[] - array of item ids.
@inventorylist_amount[] - their corresponding item amounts.
@inventorylist_equip[] - whether the item is equipped or not.
@inventorylist_refine[] - for how much it is refined.
@inventorylist_identify[] - whether it is identified.
@inventorylist_attribute[] - whether it is broken.
@inventorylist_card1[] - These four arrays contain card data for the items.
@inventorylist_card2[] These data slots are also used to store names
@inventorylist_card3[] inscribed on the items, so you can explicitly check
@inventorylist_card4[] if the character owns an item made by a specific
craftsman.
@inventorylist_expire[] - expire time (Unix time stamp). 0 means never expires.
@inventorylist_count - the number of items in these lists.
This could be handy to save/restore a character's inventory, since no other
command returns such a complete set of data, and could also be the only way to
correctly handle an NPC trader for carded and named items who could resell them
- since NPC objects cannot own items, so they have to store item data in
variables and recreate the items.
Notice that the variables this command generates are all temporary, attached to
the character, and integer.
Be sure to use @inventorylist_count to go through these arrays, and not
'getarraysize', because the arrays are not automatically cleared between runs
of 'getinventorylist'.
---------------------------------------
*cardscnt()
This function will return the number of cards inserted into the weapon currently
equipped on the invoking character.
While this function was meant for item scripts, it will work outside them:
if (cardscnt()==4) mes "So you've stuck four cards into that weapon, think you're cool now?";
---------------------------------------
*getrefine()
This function will return the number of pluses the weapon currently equipped on
the invoking character has been refined for.
While this function was meant for item scripts, it will work outside them:
if (getrefine()==10) mes "Wow. That's a murder weapon.";
---------------------------------------
*getnameditem(<item id>,"<name to inscribe>");
*getnameditem("<item name>","<name to inscribe>");
This function is equivalent to using 'getitem', however, it will not just give
the character an item object, but will also inscribe it with a specified
character's name. You may not inscribe items with arbitrary strings, only with
names of characters that actually exist. While this isn't said anywhere
specifically, apparently, named items may not have cards in them, slots or no -
these data slots are taken by the character ID who's name is inscribed. Only one
remains free and it's not quite clear if a card may be there.
This function will return 1 if an item was successfully created and 0 if it
wasn't for whatever reason. Like 'getitem', this function will also accept an
'english name' from the item database as an item name and will return 0 if no
such item exists.
---------------------------------------
*getitemslots(<item ID>)
This function will look up the item with the specified ID number in the database
and return the number of slots this kind of items has - 0 if they are not
slotted. It will also be 0 for all non-equippable items, naturally, unless
someone messed up the item database. It will return -1 if there is no such item.
Example(s):
//@slots now has the amount of slots of the item with ID 1205.
set @slots, getItemSlots(1205);
---------------------------------------
*getiteminfo(<item ID>,<type>)
This function will look up the item with the specified ID number in the database
and return the info set by TYPE argument.
It will return -1 if there is no such item.
Valid types are:
0 - Buy Price; 1 - Sell Price; 2 - Item Type;
3 - maxchance (Max drop chance of this item e.g. 1 = 0.01% , etc..
if = 0, then monsters don't drop it at all (rare or a quest item)
if = 10000, then this item is sold in NPC shops only
4 - sex; 5 - equip; 6 - weight; 7 - atk; 8 - def; 9 - range;
10 - slot; 11 - look; 12 - elv; 13 - wlv; 14 - view id
Check sample in nps\sample\getiteminfo.txt
---------------------------------------
*getequipcardid(<equipment slot>,<card slot>)
Returns value from equipped item slot in the indicated slot:
getequipcardid(num,slot)
where:
num = equip position slot
slot = 0,1,2,3 (Card Slot N)
This func returns CARD ID, 255,254,-255 (for card 0, if the item is produced) it's useful
when you want to check item cards or if it's signed. Useful for such quests as
"Sign this refined item with players name" etc;
Hat[0] +4 -> Player's Hat[0] +4
---------------------------------------
//
2,1.- End of item-related commands.
//
---------------------------------------
*getmapxy("<variable for map name>",<variable for x>,<variable for y>,<type>{,"<search string>"})
This function will locate a character object, NPC object or pet's coordinates
and place their coordinates into the variables specified when calling it. It
will return 0 if the search was successful, and -1 if the parameters given were
not variables or the search was not successful.
Type is the type of object to search for:
0 - Character object
1 - NPC object
2 - Pet object
3 - Monster object.
While 3 is meant to look for a monster object, no searching will be done if you
specify type 3, and the function will always return -1.
The search string is optional. If it is not specified, the location of the
invoking character will always be returned for types 0 and 2, the location of
the NPC running this function for type 1.
If a search string is specified, for types 0 and 1, the character or NPC with
the specified name will be located. If type is 3, the search will locate the
current pet of the character who's name is given in the search string, it will
NOT locate a pet by name.
What a mess. Example, a working and tested one now:
prontera,164,301,3%TAB%script%TAB%Meh%TAB%730,{
mes "My name is Meh. I'm here so that Nyah can find me.";
close;
}
prontera,164,299,3%TAB%script%TAB%Nyah%TAB%730,{
mes "My name is Nyah.";
mes "I will now search for Meh all across the world!";
if (getmapxy(@mapname$,@mapx,@mapy,1,"Meh")!=0) goto Notfound;
mes "And I found him on map "+@mapname$+" at X:"+@mapx+" Y:"+@mapy+" !";
close;
Notfound:
mes "I can't seem to find Meh anywhere!";
close;
}
Notice that NPC objects disabled with 'disablenpc' will still be located.
---------------------------------------
*getgmlevel()
This function will return the GM level of the account to which the invoking
character belongs. If this is somehow executed from a console command, 99 will
be returned, and 0 will be returned if the account has no GM level.
This allows you to make NPC's only accessible for certain GM levels, or behave
specially when talked to by GMs.
if (getgmlevel()) mes "What is your command, your godhood?";
if (getgmlevel()) goto Wherever;
---------------------------------------
*gettimetick(<tick type>)
This function will return the system time in UNIX epoch time (if tick type is 2)
or the time since the start of the current day in seconds if tick type is 1.
Passing 0 will make it return the server's tick, which is a measurement in
milliseconds used by the server's timer system. The server's tick is an
unsigned int which loops every ~50 days.
Just in case you don't know, UNIX epoch time is the number of seconds elapsed
since 1st of January 1970, and is useful to see, for example, for how long the
character has been online with OnPCLoginEvent and OnPCLogoutEvent, which could allow
you to make an 'online time counted for conviction only' jail script.
---------------------------------------
*gettime(<type>)
This function will return specified information about the current system time.
1 - Seconds (of a minute)
2 - Minutes (of an hour)
3 - Hour (of a day)
4 - Week day (0 for Sunday, 6 is Saturday)
5 - Day of the month.
6 - Number of the month.
7 - Year.
8 - Day of the year.
It will only return numbers.
if (gettime(4)==6) mes "It's a Saturday. I don't work on Saturdays.";
---------------------------------------
*gettimestr(<format string>,<max length>)
This function will return a string containing time data as specified by the
format string.
This uses the C function 'strfmtime', which obeys special format characters. For
a full description see, for example, the description of 'strfmtime' at
http://www.delorie.com/gnu/docs/glibc/libc_437.html
All the format characters given in there should properly work.
Max length is the maximum length of a time string to generate.
The example given in rAthena sample scripts works like this:
mes gettimestr("%Y-%m/%d %H:%M:%S",21);
This will print a full date and time like 'YYYY-MM/DD HH:MM:SS'.
---------------------------------------
*getusers(<type>)
This function will return a number of users on a map or the whole server. What
it returns is specified by Type.
Type can be one of the following values, which control what will be returned:
0 - Count of all characters on the map of the invoking character.
1 - Count of all characters in the entire server.
8 - Count of all characters on the map of the NPC the script is
running in.
---------------------------------------
*getmapusers("<map name>")
This function will return the number of users currently located on the specified
map.
Currently being used in the PVP scripts to check if a PVP room is full of not,
if the number returned it equal to the maximum allowed it will not let you
enter.
---------------------------------------
*getareausers("<map name>",<x1>,<y1>,<x2>,<y2>)
This function will return the count of connected characters which are located
within the specified area - an x1/y1-x2/y2 square on the specified map.
This is useful for maps that are split into many buildings, such as all the
"*_in" maps, due to all the shops and houses.
---------------------------------------
*getusersname;
This command will give the invoking character a list of names of the connected
characters (including themselves) into an NPC script message window (see 'mes')
paging it by 10 names as if with the 'next' command.
You need to put a 'close' after that yourself.
---------------------------------------
\\
2,2.- Guild-related commands
\\
---------------------------------------
*getguildname(<guild id>)
This function returns a guild's name given an ID number. If there is no such
guild, "null" will be returned;
// Would print what ever guild 10007 is, in my case this would return "AlcoROhics"
mes "The guild "+GetGuildName(10007)+" are all nice people.";
// This will do the same as above:
set @var,10007;
mes "We have some friends in "+GetGuildName(@var)+", you know.";
This is used all over the WoE controlling scripts. You could also use it for a
guild-based event.
---------------------------------------
*getguildmaster(<guild id>)
This function return the name of the master of the guild which has the specified
ID number. If there is no such guild, "null" will be returned.
// Would return the guild master of guild 10007, whatever that might be.
// In this example it would return "MissDjax" cause she owns "AlcoROhics" (10007)
mes getguildmaster(10007)+" runs "+getguildname(10007);
Can be used to check if the character is the guild master of the specified guild.
Maybe you want to make a room only guild masters can enter:
set @GID,getcharid(2);
if(@GID==0) goto L_NoGuild;
if(strcharinfo(0)==getguildmaster(@GID)) goto L_GuildMaster;
mes "Sorry you don't own the guild you are in";
close;
L_NoGuild:
mes "Sorry you are not in a guild";
close;
L_GuildMaster:
mes "Welcome guild master of "+GetGuildName(@GID);
close;
---------------------------------------
*getguildmasterid(<guild id>)
This function will return the character ID number of the guild master of the
guild specified by the ID. 0 if the character is not a guild master of any guild.
---------------------------------------
*getcastlename("<map name>")
This function returns the name of the castle when given the map name for that
castle. The data is read from 'db/castle_db.txt'.
---------------------------------------
*getcastledata("<map name>",<type of data>)
*setcastledata "<map name>",<type of data>,<value>;
This function returns the castle ownership information for the castle referred
to by it's map name. Castle information stored in 'save\castle.txt' for the TXT
version of the server and in 'guild_castle' table for the SQL version.
Valid types of data are:
0 - Will make the map server request the castle data from the char server, and
always return 0. This, apparently, will also cause indirectly the execution
of an 'OnAgitInit:' event mentioned at the beginning of this document.
1 - Guild ID
2 - Castle Economy score.
3 - Castle Defense score.
4 - Number of times the economy was invested in today.
5 - Number of times the defense was invested in today.
9 - Will return 1 if a Kafra was hired for this castle, 0 otherwise.
10 - Is 1 if the 1st guardian is present (Soldier Guardian)
11 - Is 1 if the 2nd guardian is present (Soldier Guardian)
12 - Is 1 if the 3rd guardian is present (Soldier Guardian)
13 - Is 1 if the 4th guardian is present (Archer Guardian)
14 - Is 1 if the 5th guardian is present (Archer Guardian)
15 - Is 1 if the 6th guardian is present (Knight Guardian)
16 - Is 1 if the 7th guardian is present (Knight Guardian)
17 - Is 1 if the 8th guardian is present (Knight Guardian)
18-25 types of data will return current hit point values for guardians 1-8
respectively.
The 'setcastledata' command will behave identically, but instead of returning
values for the specified types of accessible data, it will alter them and cause
them to be sent to the char server for storage. Data type of 0 won't do
anything, obviously.
---------------------------------------
*getgdskilllv(<guild id>,<skill id>)
*getgdskilllv(<guild id>,"<skill name>")
This function returns the level of the skill <skill id> of the guild <guild id>.
If the guild does not have that skill, 0 is returned.
If the guild does not exist, -1 is returned.
Refer to 'db/skill_db.txt' for the full list of skills. (GD_* are guild skills)
---------------------------------------
*requestguildinfo <guild id>,"<event label>";
This command requests the guild data from the char server and merrily continues
with the execution. Whenever the guild information becomes available (which
happens instantly if the guild information is already in memory, or later, if it
isn't and the map server has to wait for the char server to reply) it will run
the specified event as in a 'doevent' call.
---------------------------------------
*getmapguildusers(<mapname>,<guild id>)
Returns the amount of persons from the given guild that are on the given map.
Example(s):
//Will set the @persons variable to the amount of persons from the guild
//which ID's = 10 and are at prontera.
set @persons,getMapGuildUsers("prontera",10);
---------------------------------------
//
2,2.- End of guild-related commands
//
---------------------------------------
*getskilllv(<skill id>)
*getskilllv("<skill name>")
This function returns the level of the specified skill that the invoking
character has. If they don't have the skill, 0 will be returned. The full list
of character skills is available in 'db/skill_db.txt'.
There are two main uses for this function, it can check whether the character
has a skill or not, and it can tell you if the level is high enough.
Example 1:
if (getskilllv(152)) goto L_HasSkillThrowStone;
mes "You don't have Throw Stone";
close;
L_HasSkillThrowStone:
mes "You have got the skill Throw Stone";
close;
Example 2:
if (getskilllv(28) >= 5) goto L_HasSkillHeallvl5orMore;
if (getskilllv(28) == 10) goto L_HasSkillHealMaxed;
mes "You heal skill is below lvl 5";
close;
L_HasSkillHeallvl6orMore:
mes "Your heal lvl is 5 or more";
close;
L_HasSkillHealMaxed:
mes "Your heal lvl has been maxed";
close;
---------------------------------------
*getskilllist;
This command sets a bunch of arrays with a complete list of skills the
invoking character has. Here's what you get:
@skilllist_id[] - skill ids.
@skilllist_lv[] - skill levels.
@skilllist_flag[] - see 'skill' for the meaning of skill flags.
@skilllist_count - number of skills in the above arrays.
While 'getskillv' is probably more useful for most situations, this is the
easiest way to store all the skills and make the character something else for a
while. Advanced job for a day? :) This could also be useful to see how many
skills a character has.
---------------------------------------
*getpetinfo(<type>)
This function will return pet information for the pet the invoking character
currently has active. Valid types are:
0 - Unique pet ID number as stored by the char server and distinguishing it
from all other pets the characters actually have. This value is currently
useless, at most you can use it to tell pets apart reliably.
1 - Pet class number as per 'db/pet_db.txt' - will tell you what kind of a pet it
is.
2 - Pet name. Will return "null" if there's no pet.
3 - Pet friendly level (intimacy score). 1000 is full loyalty.
4 - Pet hungry level. 100 is completely full.
5 - Pet rename flag. 0 means this pet has not been named yet.
---------------------------------------
*gethominfo(<type>)
This function works as a direct counterpart of 'getpetinfo':
0 - Homunculus unique ID
1 - Homunculus Class
2 - Name
3 - Friendly level (intimacy score). 100000 is full loyalty.
4 - Hungry level. 100 is completely full.
5 - Rename flag. 0 means this homunculus has not been named yet.
6 - Homunculus level
---------------------------------------
*petstat(<flag>)
Returns current pet status, all are integers except name.
Returns 0 or "" if the player doesn't have pets.
Flags usable >>
PET_CLASS
PET_NAME
PET_LEVEL
PET_HUNGRY
PET_INTIMATE
Example:
set @i, petstat(PET_CLASS);
---------------------------------------
*getmonsterinfo(<mob ID>,<type>)
This function will look up the monster with the specified ID number in the
mob database and return the info set by TYPE argument.
It will return -1 if there is no such monster (or the type value is invalid),
or "null" if you requested the monster's name.
Valid types are listed in const.txt:
MOB_NAME 0 MOB_LV 1
MOB_MAXHP 2 MOB_BASEEXP 3
MOB_JOBEXP 4 MOB_ATK1 5
MOB_ATK2 6 MOB_DEF 7
MOB_MDEF 8 MOB_STR 9
MOB_AGI 10 MOB_VIT 11
MOB_INT 12 JOB_DEX 13
MOB_LUK 14 MOB_RANGE 15
MOB_RANGE2 16 MOB_RANGE3 17
MOB_SIZE 18 MOB_RACE 19
MOB_ELEMENT 20 MOB_MODE 21
Check sample in nps\sample\getmonsterinfo.txt
---------------------------------------
*getmobdrops(<mob id>)
This command will find all drops of the specified mob and return the item IDs
and drop percentages into arrays of temporary global variables.
'getmobdrops' returns 1 if successful and 0 if the mob ID doesn't exist.
Upon executing this,
$@MobDrop_item[] is a global temporary number array which contains the
item IDs of the monster's drops.
$@MobDrop_rate[] is a global temporary number array which contains the
drop percentages of each item. (1 = .01%)
$@MobDrop_count is the number of item drops found.
Be sure to use $@MobDrop_count to go through the arrays, and not
'getarraysize', because the temporary global arrays are not cleared between
runs of 'getmobdrops'. If a mob with 7 item drops is looked up, the arrays would
have 7 elements. But if another mob is looked up and it only has 5 item drops,
the server will not clear the arrays for you, overwriting the values instead. So
in addition to returning the 5 item drops, the 6th and 7th elements from the
last call remain, and you will get 5+2 item drops, of which the last 2 don't
belong to the new mob. $@MobDrop_count will always contain the correct number
(5), unlike 'getarraysize()' which would return 7 in this case.
Example:
// get a Mob ID from the user
input .@mob_id;
if (getmobdrops(.@mob_id)) { // 'getmobdrops' returns 1 on success
// immediately copy global temporary variables into scope variables,
// since we don't know when 'getmobdrops' will get called again for
// another mob, overwriting your global temporary variables
set .@count, $@MobDrop_count;
copyarray .@item[0],$@MobDrop_item[0],.@count;
copyarray .@rate[0],$@MobDrop_rate[0],.@count;
mes getmonsterinfo(.@mob_id,MOB_NAME) + " - " + .@count + " drops found:";
for( set .@i,0; .@i < .@count; set .@i,.@i +1 ) {
mes .@item[.@i] + " (" + getitemname(.@item[.@i]) + ") " + .@rate[.@i]/100 + ((.@rate[.@i]%100 < 10) ? ".0":".") + .@rate[.@i]%100 + "%";
}
} else {
mes "Unknown monster ID.";
}
close;
---------------------------------------
*getmapmobs("<map name>")
This function will return the total count of monsters currently located on the
specified map. If the map name is given as "this", the map the invoking
character is on will be used. If the map is not found, or the invoker is not a
character while the map is "this", it will return -1.
---------------------------------------
*skillpointcount()
Returns the total amount of skill points a character possesses (SkillPoint+SP's used in skills)
This command can be used to check the currently attached characters total amount of skill points.
This means the skill points used in skill are counted, and added to SkillPoints (number of skill points not used).
Example:
//This will set the temp character variable @skillPoints to the amount of skill points,
//and then tell the player the value.
set @skillPoints, skillPointCount();
mes "You have "+@skillPoints+" skill points in total!";
//Self-explanatory... :P
if (skillPointCount() > 20)
mes "Wow, you have more then 20 Skill Points in total!";
---------------------------------------
*getscrate(<effect type>,<base rate>{,<target ID number>})
This function will return the chance of a status effect affecting the invoking
character, in percent, modified by the their current defense against said
status. The 'base rate' is the base chance of the status effect being inflicted,
in percent.
if (rand(100) > getscrate(Eff_Blind, 50)) goto BlindHimNow;
You can see the full list of available effect types you can possibly inflict in
'db/const.txt' under 'Eff_'.
It is pretty certain that addressing the target by an ID number will not
currently work due to a bug.
---------------------------------------
========================
|3.- Checking commands.|
========================
-------------------------
*playerattached()
Returns the ID of the player currently attached to the script. It will return
0 if no one is attached, or if the attached player no longer exists on the map
server. It is wise to check for the attached player in script functions that
deal with timers as there's no guarantee the player will still be logged on
when the timer triggers. Note that the ID of a player is actually their
account ID.
---------------------------------------
*isloggedin(<account id>{,<char id>})
This function returns 1 if the specified account is logged in and 0 if they
aren't. You can also pass the char_id to check for both account and char id.
---------------------------------------
*checkweight(<item id>,<amount>)
*checkweight("<item name>",<amount>)
This function will compute and return 1 if the total weight of a specified
number of specific items does not exceed the invoking character's carrying
capacity, and 0 otherwise. It is important to see if a player can carry the
items you expect to give them, failing to do that may open your script up to
abuse or create some very unfair errors.
This function, in addition to checking to see if the player is capable of
holding a set amount of items, also ensures the player has room in their
inventory for the item(s) they will be receiving.
Like 'getitem', this function will also accept an 'english name' from the
database as an argument.
checkweight(502,10) // 10 apples
if (checkweight(502,10) == 0 ) goto L_OverWeight;
getitem 502,10;
close;
L_OverWeight:
mes "Sorry you cannot hold this amount of apples";
close;
Or to put this another way:
if (checkweight("APPLE",10)) goto L_Getapples;
mes "Sorry you cannot hold this amount of apples";
close;
L_Getapples:
getitem 502,10;
close;
Both these examples have the same effect.
---------------------------------------
*basicskillcheck()
This function will return the state of the configuration option
'basic_skill_check' in 'battle_athena.conf'. It returns 1 if the option is
enabled and 0 if it isn't. If the 'basic_skill_check' option is enabled, which
it is by default, characters must have a certain number of basic skill levels to
sit, request a trade, use emotions, etc. Making your script behave differently
depending on whether the characters must actually have the skill to do all these
things might in some cases be required.
---------------------------------------
*checkoption(<option number>)
*checkoption1(<option number>)
*checkoption2(<option number>)
*setoption <option number>{,<flag>};
The 'setoption' series of functions check for a so-called option that is set on
the invoking character. 'Options' are used to store status conditions and a lot
of other non-permanent character data of the yes-no kind. For most common cases,
it is better to use 'checkcart','checkfalcon','checkpeco' and other similar
functions, but there are some options which you cannot get at this way. They
return 1 if the option is set and 0 if the option is not set.
Option numbers valid for the first (option) version of this command are:
0x1 - Sight in effect.
0x2 - Hide in effect.
0x4 - Cloaking in effect.
0x8 - Cart number 1 present.
0x10 - Falcon present.
0x20 - Peco Peco present.
0x40 - GM Perfect Hide in effect.
0x80 - Cart number 2 present.
0x100 - Cart number 3 present.
0x200 - Cart number 4 present.
0x400 - Cart number 5 present.
0x800 - Orc head present.
0x1000 - The character is wearing a wedding sprite.
0x2000 - Ruwach is in effect.
0x4000 - Chasewalk in effect.
0x8000 - Flying or Xmas suit.
0x10000 - Sighttrasher.
Option numbers valid for the second version (opt1) of this command are:
1 - Petrified.
2 - Frozen.
3 - Stunned.
4 - Sleeping.
6 - Petrifying (the state where you can still walk)
Option numbers valid for the third version (opt2) of this command are:
0x1 - Poisoned.
0x2 - Cursed.
0x4 - Silenced.
0x8 - Signum Crucis (plays a howl-like sound effect, but otherwise no visible effects are displayed)
0x10 - Blinded.
0x80 - Deadly poisoned.
Option numbers (except for opt1) are bit-masks - you can add them up to check
for several states, but the functions will return true if at least one of them
is in effect.
'setoption' will set options on the invoking character. There are no second and
third versions of this command, so you can only change the values in the first
list (cloak, cart, ruwach, etc). if flag is 1 (default when omitted),
the option will be added to what the character currently has; if 0, the option is removed.
This is definitely not a complete list of available option flag numbers. Ask a
core developer (or read the source: src/map/status.h) for the full list.
---------------------------------------
*setcart {<type>};
*checkcart()
If <type> is 0 this command will remove the cart from the character.
Otherwise it gives the invoking character a cart. The cart given will be
cart number <type> and will work regardless of whether the character is a
merchant class or not.
Note: the character needs to have the skill MC_PUSHCART to gain a cart
The accompanying function will return 1 if the invoking character has a cart
(any kind of cart) and 0 if they don't.
if (checkcart()) mes "But you already have a cart!";
---------------------------------------
*setfalcon {<flag>};
*checkfalcon()
If <flag> is 0 this command will remove the falcon from the character.
Otherwise it gives the invoking character a falcon. The falcon will be there
regardless of whether the character is a hunter or not. It will (probably) not
have any useful effects for non-hunters though.
Note: the character needs to have the skill HT_FALCON to gain a falcon
The accompanying function will return 1 if the invoking character has a falcon
and 0 if they don't.
if (checkfalcon()) mes "But you already have a falcon!";
---------------------------------------
*setriding {<flag>};
*checkriding()
If <flag> is 0 this command will remove the mount from the character.
Otherwise it give the invoking character a PecoPeco (if they are a Knight
series class) or a GrandPeco (if they are a Crusader series class). Unlike
'setfalcon' and 'setcart' this will not work at all if they aren't of a class
which can ride.
Note: the character needs to have the skill KN_RIDING to gain a mount
The accompanying function will return 1 if the invoking character is riding a
bird and 0 if they don't.
if (checkriding()) mes "PLEASE leave your bird outside! No riding birds on the floor here!";
---------------------------------------
*checkvending ({"<player name>"})
*checkchatting ({"<Player Name>"})
If the player's name is given, this command checks for that player
to be online and whether he/she is chatting or vending.
When no name is given, the attached player is used for checking.
Returns true or false (1 or 0) when the player is chatting/vending or not.
Example(s):
if (checkVending("Aaron")) mes "Aaron is currently vending!";
//This will check if Aaron is vending, and if so, put a message in front
//of the attached player saying Aaron is vending.
if (checkChatting()) mes "You are currently chatting!";
//This will check if you're in a chat room or not
---------------------------------------
*agitcheck()
*agitcheck2()
These function will let you check whether the server is currently in WoE mode
(or WoE SE mode if the second function is called) and will return 1 if War of
Emperium is on and 0 if it isn't.
---------------------------------------
*isnight()
*isday()
These functions will return 1 or 0 depending on whether the server is in night
mode or day mode. 'isnight' returns 1 if it's night and 0 if it isn't, 'isday'
the other way around. They can be used interchangeably, pick the one you like
more:
// These two are equivalent:
if (isday()) mes "I only prowl in the night.";
if (isnight()!=1) mes "I only prowl in the night.";
---------------------------------------
\\
3,1.- Item-related commands
\\
---------------------------------------
*isequipped(<id>{,<id>{,<id>{,<id>}}})
This function will return 1 if the invoking character has all of the item
IDs given equipped (if card IDs are passed, then it checks if the cards are
inserted into slots in the equipment they are currently wearing). Theoretically
there is no limit to the number of items that may be tested for at the same time.
If even one of the items given is not equipped, 0 will be returned.
// (Poring,Santa Poring,Poporing,Marin)
if (isequipped(4001,4005,4033,4196)) mes "Wow! You're wearing a full complement of possible poring cards!";
// (Poring)
if (isequipped(4001)) mes "A poring card is useful, don't you think?";
The function was meant for item scripts to support the cards released by Gravity
in February 2005, but it will work just fine in normal NPC scripts.
---------------------------------------
*isequippedcnt(<card id>{,<card id>{,<card id>{,<card id>}}})
This function is similar to 'isequipped', but instead of 1 or 0, it will return
the number of cards in the list given that were found on the invoking character.
if (isequippedcnt(4001,4005,4033,4196)=4) mes "Finally got all four poring cards?";
---------------------------------------
*checkequipedcard(<card id>)
This function will return 1 if the card specified by it's item ID number is
inserted into any equipment they have in their inventory, currently equipped or
not.
---------------------------------------
*getequipisidentify(<equipment slot>)
This function will return 1 if an item in the specified equipment slot is
identified and 0 if it isn't. Since you can't even equip unidentified equipment,
there's a question of whether it can actually end up there, and it will normally
return 1 all the time if there is an item in this equipment slot.
Which is kinda pointless.
For a list of equipment slots see 'getequipid'.
---------------------------------------
//
3,1.- End of item-related commands
//
---------------------------------------
==============================
|4.- Player-related commands.|
==============================
-------------------------
*attachrid(<account ID>)
*detachrid;
These commands allow the manipulation of the script's currently attached player.
While attachrid allows attaching of a different player by using it's account id
for the parameter rid, detachrid makes the following commands run, as if the
script was never invoked by a player.
In case, that the player cannot be attached, such as, when the player went
offline in the mean time, attachrid returns 0, otherwise 1.
---------------------------------------
*rid2name(<rid>)
Converts rid to name. Note: The player/monster/NPC must be online/enabled.
Good for PCKillEvent where you can convert 'killedrid' to the name of the player.
Note: rid2name may not produce correct character names since rid = account id.
It will return the current online character of the account only.
---------------------------------------
*message "<character name>","<message>";
That command will send a message to the chat window of the character specified
by name. The text will also appear above the head of that character. It will not
be seen by anyone else.
---------------------------------------
*dispbottom "<message>";
This command will send the given message into the invoking character's chat
window.
---------------------------------------
*warp "<map name>",<x>,<y>;
This command will take the invoking character to the specified map, and if
wanted, specified coordinates too, but these can be random.
warp "place",50,55;
This would take them to X 50 Y 55 on the map called "place". If your X and Y
coordinates land on an unwalkable map square, it will send the warped character
to a random place. Same will happen if they are both zero:
warp "place",0,0;
Notice that while warping people to coordinates 0,0 will normally get them into
a random place, it's not certain to always be so. Darned if I know where this is
actually coded, it might be that this happens because square 0,0 is unwalkable
on all official maps. If you're using custom maps, beware.
There are also three special 'map names' you can use.
"Random" will warp the player randomly on the current map.
"Save" and "SavePoint" will warp the player back to their save point.
---------------------------------------
*areawarp "<from map name>",<x1>,<y1>,<x2>,<y2>,"<to map name>",<x3>,<y3>;
This command is similar to 'warp', however, it will not refer to the invoking
character, but instead, all characters within a specified area, defined by the
x1/y1-x2/y2 square, will be warped. Nobody outside the area will be affected,
including the activating character, if they are outside the area.
areawarp "place",10,10,120,120,"place2",150,150;
Everyone that is in the area between X 10 Y 10 and X 120 Y 120, in a square
shape, on the map called "place", will be affected, and warped to "place2" X 150
Y 150
areawarp "place",10,10,120,120,"place2",0,0;
By using ,0,0; as the destination coordinates it will take all the characters in
the affected area to a random set of co-ordinates on "place2".
Like 'warp', areawarp will also explicitly warp characters randomly into the
current map if you give the 'to map name' as "Random".
See also 'warp'.
---------------------------------------
*warpparty "<to_mapname>",<x>,<y>,<party_id>,{"<from_mapname>"};
Warps a party to specified map and coordinate given the party ID, which you can get with
getcharid(1). You can also request another party id given a member's name with getcharid(1,<player_name>).
You can use the following "map names" for special warping behavior:
Random: All party members are randomly warped in their current map (as if they
all used a fly wing)
SavePointAll: All party members are warped to their respective save point.
SavePoint: All party members are warped to the save point of the currently
attached player (will fail if there's no player attached).
Leader: All party members are warped to the leader's position. The leader must
be online and in the current map-server for this to work.
If you specify a from_mapname, warpparty will only affect those on that map.
Example:
mes "[Party Warper]";
mes "Here you go!";
close2;
set @id,getcharid(1);
warpparty "prontera",150,100,@id;
close;
---------------------------------------
*warpchar "<mapname>",<x>,<y>,<char_id>;
Warps another player to specified map and coordinate given the char id, which you can get with
getcharid(0,<player_name>). Obviously this is useless if you want to warp the same player that
is executing this script, unless it's some kind of "chosen" script.
Example:
warpchar "prontera",150,100,150001;
---------------------------------------
*warpguild "<mapname>",<x>,<y>,<guild_id>;
Warps a guild to specified map and coordinate given the guild id, which you can get with
getcharid(2). You can also request another guild id given the member's name with getcharid(2,<player_name>).
You can use the following "map names" for special warping behavior:
Random: All party members are randomly warped in their current map (as if they
all used a fly wing)
SavePointAll: All party members are warped to their respective save point.
SavePoint: All party members are warped to the save point of the currently
attached player (will fail if there's no player attached).
Example:
warpguild "prontera",x,y,Guild_ID;
---------------------------------------
*warppartner("<map name>",<x>,<y>);
This function will find the invoking character's marriage partner, if any, and
warp them to the map and coordinates given. Go kidnap that spouse. :) It will
return 1 upon success and 0 if the partner is not online, the character is not
married, or if there's no invoking character (no RID). 0,0 will, as usual,
normally translate to random coordinates.
---------------------------------------
*savepoint "<map name>",<x>,<y>;
*save "<map name>",<x>,<y>;
This command saves where the invoking character will return to upon
'return to save point', if dead or in some other cases. The two versions are
equivalent. Map name, X coordinate and Y coordinate should be perfectly obvious.
This ignores any and all map flags, and can make a character respawn where no
teleportation is otherwise possible.
savepoint "place",350,75;
---------------------------------------
*heal <hp>,<sp>;
This command will heal a set amount of HP and/or SP on the invoking character.
heal 30000,0; // This will heal 30,000 HP
heal 0,30000; // This will heal 30,000 SP
heal 300,300; // This will heal 300 HP and 300 SP
This command just alters the hit points and spell points of the invoking
character and produces no other output whatsoever.
---------------------------------------
*itemheal <hp>,<sp>;
This command heals given absolute amounts of HP and/or SP on the invoking
character. Unlike heal, this command is intended for use in item scripts. It
applies potion-related bonuses, such as alchemist ranking, cards and status
changes. When used inside an NPC script, certain bonuses are omitted.
There is also a nice example on using this with the 'rand' function, to give you
a random amount of healing.
// This will heal anything thing from 100 to 150 HP and no SP
itemheal rand(100,150),0;
---------------------------------------
*percentheal <hp>,<sp>;
This command will heal the invoking character. It heals the character, but not
by a set value - it adds percent of their maximum HP/SP.
percentheal 100,0; // This will heal 100% HP
percentheal 0,100; // This will heal 100% SP
percentheal 50,50; // This will heal 50% HP and 50% SP
So the amount that this will heal will depend on the total amount of HP or SP
you have maximum. Like 'heal', this will not call up any animations or effects.
---------------------------------------
*recovery;
This command will revive and restore full HP and SP to all characters currently
connected to the server.
---------------------------------------
*jobchange <job number>{,<upper flag>};
This command will change the job class of the invoking character.
jobchange 1; // This would change your player into a Swordman
jobchange 4002; // This would change your player into a Swordman High
This command does work with numbers, but you can also use job names. The full
list of job names and the numbers they correspond to can be found in
'db/const.txt'.
// This would change your player into a Swordman
jobchange Job_Swordman;
// This would change your player into a Swordman High
jobchange Job_Swordman_High;
'upper flag' can alternatively be used to specify the type of job one changes
to. For example, jobchange Job_Swordman,1; will change the character to a high
swordsman. The upper values are:
-1 (or when omitted): preserves the current job type.
0: Normal/standard classes
1: High/Advanced classes
2: Baby classes
This command will also set a permanent character-based variable
'jobchange_level' which will contain the job level at the time right before
changing jobs, which can be checked for later in scripts.
---------------------------------------
*jobname (<job number>)
This command retrieves the name of the given job using the msg_athena entries 550->650.
mes "[Kid]";
mes "I never thought I'd met a "+jobname(Class)+" here of all places.";
close;
---------------------------------------
*eaclass ({<job number>})
This commands returns the "eA job-number" corresponding to the given class (if none is given, it returns uses
the invoking player's class as argument). The eA job-number is also a class number system, but it's one that
comes with constants which make it easy to convert among classes. The command will return -1 if you pass it a
job number which doesn't has a eA Job value equivalent.
set @eac, eaclass();
if ((@eac&EAJ_BASEMASK) == EAJ_SWORDMAN)
mes "You must be a swordman, knight, crusader, paladin, high swordman, lord knight, baby swordman,";
mes "baby knight or baby crusader.";
if (@eac&EAJL_UPPER)
mes "You are a rebirth job.";
if ((@eac&EAJ_UPPERMASK) == EAJ_SWORDMAN)
mes "You must be a Swordman, Baby Swordman or High Swordman.";
For more information on the eA Job System, see the docs/ea_job_system.txt file.
---------------------------------------
*roclass <job number> {,<gender>}
Does the opposite of eaclass. That is, given a eA Job class, it returns which is the corresponding RO class number.
A gender is required because both Bard and Dancers share the same eA Job value (EAJ_BARDDANCER), if it isn't given, the
gender of the executing player is taken (if there's no player running the script, male will be used by default).
The command returns -1 when there isn't a valid class to represent the required job (for example, if you try to get the
baby version of a Taekwon class).
set @eac, eaclass();
//Check if class is already rebirth
if (@eac&EAJL_UPPER) {
mes "You look strong.";
close;
}
set @eac, roclass(@eac|EAJL_UPPER);
//Check if class has a rebirth version
if (@eac != -1) {
mes "Bet you can't wait to become a "+jobname(@eac)+"!";
close;
}
---------------------------------------
*changebase <job ID number>;
This will change the appearance of the invoking character to that of a specified
job class. Nothing but appearance will change. This command is used in item
scripts for "Wedding Dress" and "Tuxedo" so the character like job 22, which is
the job number of the wedding sprites.
It would be entered in the equip bonus section of an item
2338,Wedding_Dress,Wedding Dress,5,43000,,500,,0,,0,119529470,7,0,16,,0,1,0,{ bonus bMdef,15; changebase 22; }
---------------------------------------
*classchange <view id>,<type>;
This command is very ancient, it's origins are clouded in mystery.
It will send a 'display id change' packet to everyone in the immediate area of
the NPC object, which will supposedly make the NPC look like a different sprite,
an NPC sprite ID, or a monster ID. This effect is not stored anywhere and will
not persist (Which is odd, cause it would be relatively easy to make it do so)
and most importantly, will not work at all since this command was broken with
the introduction of advanced classes. The code is written with the assumption
that the lowest sprite IDs are the job sprites and the anything beyond them is
monster and NPC sprites, but since the advanced classes rolled in, they got the
ID numbers on the other end of the number pool where monster sprites float.
As a result it is currently impossible to call this command with a valid view
id. It will do nothing whatsoever if the view ID is below 4047. Getting it to
run will actually just crash the client.
It could be a real gem if it can be gotten to actually do what it's supposed to
do, but this will only happen in a later SVN revision.
---------------------------------------
*changesex;
This command will change the gender for the attached character's account. If it
was male, it will become female, if it was female, it will become male. The
change will be written to the character server, the player will receive the
message: "Need disconnection to perform change-sex request..." and the player
will be immediately kicked to the login screen. When they log back in, they will
be the opposite sex.
If there are any Dancer/Gypsy or Bard/Clown characters on the account,
they will also have their skills reset upon 'changesex'.
---------------------------------------
*getexp <base xp>,<job xp>;
This command will give the invoking character a specified number of base and job
experience points. Can be used as a quest reward. Negative values won't work.
getexp 10000,5000;
You can also use the "set" command with the constants defined in 'db/const.txt':
// These 2 combined has the same effect as the above command
set BaseExp,BaseExp+10000;
set JobExp,JobExp+5000;
You can also reduce the amount of experience points:
set BaseExp,BaseExp-10000;
Note that 'getexp' is now subject to the 'quest_exp_rate' config option, which
adjusts the gained value. If you want to bypass this, use the 'set' method.
---------------------------------------
*setlook <look type>,<look value>;
*changelook <look type>,<look value>;
'setlook' will alter the look data for the invoking character. It is used
mainly for changing the palette used on hair and clothes: you specify which look
type you want to change, then the palette you want to use. Make sure you specify
a palette number that exists/is usable by the client you use.
'changelook' works the same, but is only client side (it doesn't save the look value).
// This will change your hair(6), so that it uses palette 8, what ever your
// palette 8 is, your hair will use that color
setlook 6,8;
// This will change your clothes(7), so they are using palette 1, whatever
// your palette 1 is, your clothes will then use that set of colors.
setlook 7,1;
Here are the possible look types:
0 - Base sprite
1 - Hairstyle
2 - Weapon
3 - Head bottom
4 - Head top
5 - Head mid
6 - Hair color
7 - Clothes color
8 - Shield
9 - Shoes
Whatever 'shoes' means is anyone's guess, ask Gravity - the client does nothing
with this value. It still wants it from the server though, so it is kept, but
normally doesn't do a thing.
Only the look data for hairstyle, hair color and clothes color are saved to the
char server's database and will persist. The rest freely change as the character
puts on and removes equipment, changes maps, logs in and out and otherwise you
should not expect to set them. In fact, messing with them is generally
hazardous, do it at your own risk, it is not tested what will this actually do -
it won't cause database corruption and probably won't cause a server crash, but
it's easy to crash the client with just about anything unusual.
However, it might be an easy way to quickly check for empty view IDs for
sprites, which is essential for making custom headgear.
Since a lot of people have different palettes for hair and clothes, it's
impossible to tell you what all the color numbers are. If you want a serious
example, there is a Stylist script inside the default rAthena installation that
you can look at, this may help you create a Stylist of your own:
'custom\dye.txt'
---------------------------------------
*pushpc <direction>,<cells>;
This command will push the currently attached player to given direction by given
amount of square cells. Direction is the same as used when declaring NPCs, and
can be specified by using one of the DIR_* constants (db/const.txt).
The knock-back is not restricted by items or map flags, only obstacles are taken
into account. If there is not enough space to perform the push (e.g. due to a
wall), the character is pushed only up to the obstacle.
// pushes the character 5 cells in 3 o'clock direction from it's
// current position.
pushpc DIR_EAST, 5;
---------------------------------------
\\
4,1.- Item-related commands
\\
---------------------------------------
*getitem <item id>,<amount>{,<account ID>};
*getitem "<item name>",<amount>{,<account ID>};
This command will give a specific amount of specified items to the target
character. If the character is not online, nothing will happen.
If <account ID> is not specified, items will be created in the invoking
character inventory instead.
In the first and most commonly used version of this command, items are
referred to by their database ID number found inside 'db/item_db.txt'.
getitem 502,10 // The person will receive 10 apples
getitem 617,1 // The person will receive 1 Old Violet Box
Giving an item ID of -1 will give a specified number of random items from the
list of those that fall out of Old Blue Box. Unlike in all other cases, these
will be unidentified, if they turn out to be equipment. This is exactly what's
written in the Old Blue Box's item script.
Other negative IDs also correspond to other random item generating item tables:
Giving an item ID of -2 will produce the effects of Old Violet Box.
Giving an item ID of -3 will produce the effects of Old Card Album.
Giving an item ID of -4 will produce the effects of Gift Box.
Giving an item ID of -5 will produce the effects of Worn Out Scroll, which, in
current SVN, drops only Jellopies anyway.
This transaction is logged if the log script generated transactions option is
enabled.
You may also create an item by it's name in the 'english name' field in the
item database:
getitem "RED_POTION",10;
Which will do what you'd expect. If it can't find that name in the database,
apples will be created anyway. It is often a VERY GOOD IDEA to use it like this.
This is used in pretty much all NPC scripts that have to do with items and
quite a few item scripts. For more examples check just about any official script.
---------------------------------------
*getitem2 <item id>,<amount>,<identify>,<refine>,<attribute>,<card1>,<card2>,<card3>,<card4>{,<account ID>};
*getitem2 "<Item name>",<amount>,<identify>,<refine>,<attribute>,<card1>,<card2>,<card3>,<card4>{,<account ID>};
This command will give an amount of specified items to the invoking character.
If an optional account ID is specified, and the target character is currently
online, items will be created in their inventory instead. If they are not
online, nothing will happen. It works essentially the same as 'getitem' (it even
works for negative ID numbers the same way, which is kinda silly) but is a lot
more flexible, since it allows you to give the player an item altered with it's
specific properties.
Those parameters that are different from 'getitem' are:
identify - Whether you want the item to be identified or not, 0 unidentified,
1 identified.
refine - For how many pluses will it be refined.
It will not let you refine an item higher than +10, if you
specify more it'll still be 10.
attribute - Whether the item is broken (1) or not (0) and NOT an elemental
attribute.
card1,2,3,4 - If you want a card compound to it, place the card ID number into
the specific card slot. Card ID numbers also found in
'db/item_db.txt'
Card1-card4 values are also used to store name information for named items, as
well as the elemental property of weapons and armor. You can create a named item
in this manner, however, if you just need a named piece of standard equipment,
it is much easier to the 'getnameditem' function instead.
You will need to keep these values if you want to destroy and then perfectly
recreate a named item, for this see 'getinventorylist'.
If you still want to try creating a named item with this command because
'getnameditem' won't do it for you cause it's too limited, you can do it like
this. Careful, minor magic ahead.
// First, let's get an ID of a character who's name will be on the item.
// Only an existing character's name may be there.
// Let's assume our character is 'Adam' and find his ID.
set @charid,getcharid(0,"Adam");
// Now we split the character ID number into two portions with a binary
// shift operation. If you don't understand what this does, just copy it.
set @card3, @charid & 65535;
set @card4, @charid >> 16;
// If you're inscribing non-equipment, @card1 must be 254.
// Arrows are also not equipment. :)
set @card1,254;
// For named equipment, card2 means the Star Crumbs and elemental
// crystals used to make this equipment. For everything else, it's 0.
set @card2,0;
// Now, let's give the character who invoked the script some
// Adam's Apples:
getitem2 512,1,1,0,0,@card1,@card2,@card3,@card4;
This wasn't tested with all possible items, so I can't give any promises,
experiment first before relying on it.
To create equipment, continue this example it like this:
// We've already have card3 and card4 loaded with correct
// values so we'll just set up card1 and card2 with data
// for an Ice Stiletto.
// If you're inscribing equipment, @card1 must be 255.
set @card1,255;
// That's the number of star crumbs in a weapon.
set @sc,2;
// That's the number of elemental property of the weapon.
set @ele,1;
// And that's the wacky formula that makes them into
// a single number.
set @card2,@ele+((@sc*5)<<8);
// That will make us an Adam's +2 VVS Ice Stiletto:
getitem2 1216,1,1,2,0,@card1,@card2,@card3,@card4;
Experiment with the number of star crumbs - I'm not certain just how much will
work most and what it depends on. The valid element numbers are:
1 - Ice, 2 - Earth 3 - Fire 4 - Wind.
You can, apparently, even create duplicates of the same pet egg with this
command, creating a pet which is the same, but simultaneously exists in two
eggs, and may hatch from either, although, I'm not sure what kind of a mess will
this really cause.
---------------------------------------
*getnameditem <item name|item id>,<Character name|character ID>;
-Note: there's a total of 4 possible combinations of this command.
E.g: item name and character name, or with character id, etc...
Create a item signed with the given character's name.
This is the same as using the hard(ly) explained way with getitem2.
The command returns 1 when the item is created successfully, or 0 when failed.
Failure occurs when there is:
- no player attached
- Item name or ID is not valid
- The given character ID/name is offline.
Example:
//This will give the currently attached player a Aaron's Apple (if Aaron is online).
getnameditem "Apple","Aaron";
//Self-explanatory (I hope).
if (getnameitem("Apple","Aaron")) {
mes "You now have a Aaron's Apple!";
}
---------------------------------------
*rentitem <item id>,<time>;
*rentitem "<item name>",<time>;
Creates a rental item in the attached character's inventory. The item will expire
in <time> seconds and be automatically deleted. When receiving a rental item,
the character will receive a message in their chat window. The character will
also receive warning messages in their chat window before the item disappears.
This command can not be used to rent stackable items. Rental items cannot be
dropped, traded, sold to NPCs, or placed in guild storage. (i.e. trade mask 75)
Note: 'delitem' in an NPC script can still remove rental items.
---------------------------------------
*makeitem <item id>,<amount>,"<map name>",<X>,<Y>;
*makeitem "<item name>",<amount>,"<map name>",<X>,<Y>;
This command will create an item lying around on a specified map in the
specified location.
itemid - Found in 'db/item_db.txt'
amount - Amount you want produced
map name - The map name
X - The X coordinate
Y - The Y coordinate.
This item will still disappear just like any other dropped item. Like 'getitem',
it also accepts an 'english name' field from the database and creates apples if
the name isn't found.
If the map name is given as "this", the map the invoking character is on will be used.
---------------------------------------
*searchitem <array name>,"<item name>";
This command will fill the given array with the ID of items whose name matches the given one. It returns the number of items found. For performance reasons, the results array is limited to 10 items.
mes "What item are you looking for?";
input @name$;
set @qty, searchitem(@matches[0],@name$);
mes "I found "+@qty+" items:";
for (set @i, 0; @i < @qty; set @i, @i+1)
//Display name (eg: "Apple[0]")
mes getitemname(@matches[@i])+"["+getitemslots(@matches[@i])+"]";
---------------------------------------
*delitem <item id>,<amount>{,<account ID>};
*delitem "<item name>",<amount>{,<account ID>};
This command will take a specified amount of items from the invoking/target character.
As all the item commands, this one uses the ID of the item found inside
'db/item_db.txt'. The items are destroyed - there is no way an NPC can simply
own items and have an inventory of them, other as by destroying and recreating
them when needed.
delitem 502,10 // The person will lose 10 apples
delitem 617,1 // The person will lose 1 Old Violet Box
It is always a good idea to check if the player actually has the items before you delete them.
If you try to delete more items that the player has, the player will lose the ones he/she has
and the script will be terminated with an error.
Like 'getitem' this command will also accept an 'english name' field from the
database. If the name is not found, nothing will be deleted.
---------------------------------------
*delitem2 <item id>,<amount>,<identify>,<refine>,<attribute>,<card1>,<card2>,<card3>,<card4>{,<account ID>};
*delitem2 "<Item name>",<amount>,<identify>,<refine>,<attribute>,<card1>,<card2>,<card3>,<card4>{,<account ID>};
This command will take a specified amount of items from the invoking/target character.
Check 'getitem2' to understand its expanded parameters.
---------------------------------------
*countitem(<item id>)
*countitem("<item name>")
This function will return the number of items for the specified item ID that the
invoking character has in the inventory.
mes "[Item Checker]";
mes "Hmmm, it seems you have "+countitem(502)+" apples";
close;
Like 'getitem', this function will also accept an 'english name' from the
database as an argument.
If you want to state the number at the end of a sentence, you can do it by
adding up strings:
mes "[Item Checker]";
mes "Hmmm, the total number of apples you are holding is "+countitem("APPLE");
close;
---------------------------------------
*countitem2(<item id>,<identify>,<refine>,<attribute>,<card1>,<card2>,<card3>,<card4>)
*countitem2("<item name>",<identify>,<refine>,<attribute>,<card1>,<card2>,<card3>,<card4>)
Expanded version of 'countitem' function, used for created/carded/forged items.
This function will return the number of items for the specified item ID and
other parameters that the invoking character has in the inventory.
Check 'getitem2' to understand the arguments of the function.
---------------------------------------
*groupranditem <group id>;
Returns the item_id of a random item picked from the group specified. The
different groups and their group number are specified in db/item_group_db.txt
When used in conjunction with other functions, you can get a random item. For
example, for a random pet lure:
getitem groupranditem(15),1;
---------------------------------------
*enable_items;
*disable_items;
These commands enable item usage while an NPC is running. When enable_items is
run, items can be used during scripts until disable_items is called.
To avoid possible exploits, when enable_items is invoked, it will only enable
item usage while running that script in particular. Note that if a different
script also calls enable_items, it will override the last call (so you may
want to call this command at the start of your script without assuming the
effect is still in effect).
---------------------------------------
*itemskill <skill id>,<skill level>;
*itemskill "<skill name>",<skill level>;
This command meant for item scripts to replicate single-use skills in usable
items. It will not work properly, if there is a visible dialog window or menu.
If the skill is self or auto-targeting, it will be used immediately otherwise a
target cursor is shown.
// When Anodyne is used, it will cast Endure (8), Level 1, as if the actual
// skill has been used from skill tree.
605,Anodyne,Anodyne,11,2000,0,100,,,,,10477567,2,,,,,{ itemskill 8,1; },{}
---------------------------------------
*produce <item level>;
This command will open a crafting window on the client connected to the invoking
character. The 'item level' is a number which determines what kind of a crafting
window will pop-up. You can see the full list of such item levels in
'db/produce_db.txt' which determines what can actually be produced.
The window will not be empty only if the invoking character can actually produce
the items of that type and has the appropriate raw materials in their inventory.
Valid item levels are:
1 - Level 1 Weapons
2 - Level 2 Weapons
3 - Level 3 Weapons
21 - Blacksmith's Stones and Metals
22 - Alchemist's Potions, Holy Water, Assassin Cross's Deadly Poison
23 - Elemental Converters
---------------------------------------
*cooking <dish level>;
This command will open a produce window on the client connected to the invoking
character. The 'dish level' is the number which determines what kind of dish
level you can produce. You can see the full list of dishes that can be produced in
'db/produce_db.txt'.
The window will be shown empty if the invoking character does not have enough of
the required incredients to cook a dish.
Valid dish levels are:
11 - Level 1 Dish
12 - Level 2 Dish
13 - Level 3 Dish
14 - Level 4 Dish
15 - Level 5 Dish
16 - Level 6 Dish
17 - Level 7 Dish
18 - Level 8 Dish
19 - Level 9 Dish
20 - Level 10 Dish
Altough it's required to set a dish level, it doesn't matter if you set it to 1
and you want to cook a level 10 dish, as long as you got the required incredients
to cook the dish the command works.
---------------------------------------
*successremovecards <equipment slot>;
This command will remove all cards from the item found in the specified
equipment slot of the invoking character, create new card items and give them to
the character. If any cards were removed in this manner, it will also show a
success effect.
---------------------------------------
*failedremovecards <equipment slot>,<type>;
This command will remove all cards from the item found in the specified
equipment slot of the invoking character. 'type' determines what happens to the
item and the cards:
0 - will destroy both the item and the cards.
1 - will keep the item, but destroy the cards.
2 - will keep the cards, but destroy the item.
Whatever the type is, it will also show a failure effect on screen.
---------------------------------------
*repair <broken item number>;
This command repairs a broken piece of equipment, using the same list of broken
items as available through 'getbrokenid'.
The official scripts seem to use the repair command as a function instead:
'repair(<number>)' but it returns nothing on the stack. Probably only Valaris,
who made it, can answer why is it so.
---------------------------------------
*successrefitem <equipment slot>;
This command will refine an item in the specified equipment slot of the invoking
character by +1. For a list of equipment slots see 'getequipid'. This command
will not only add the +1, but also display a 'refine success' effect on the
character and put appropriate messages into their chat window. It will also give
the character fame points if a weapon reached +10 this way, even though these
will only take effect for blacksmith who will later forge a weapon.
The official scripts seem to use the 'successrefitem' command as a function
instead: 'successrefitem(<number>)' but it returns nothing on the stack.
This is since jAthena, so probably nobody knows for sure why is it so.
---------------------------------------
*failedrefitem <equipment slot>;
This command will fail to refine an item in the specified equipment slot of the
invoking character. The item will be destroyed. This will also display a 'refine
failure' effect on the character and put appropriate messages into their chat
window.
The official scripts seem to use the 'failedrefitem' command as a function
instead: 'failedrefitem(<number>)' but it returns nothing on the stack. This is
since jAthena, so probably nobody knows for sure why is it so.
---------------------------------------
*unequip <equipment slot>;
This command will unequip whatever is currently equipped in the invoking
character's specified equipment slot. For a full list of possible equipment
slots see 'getequipid'.
If an item occupies several equipment slots, it will get unequipped from all of
them. (Which is a good thing.)
---------------------------------------
*clearitem;
This command will destroy all items the invoking character has in their
inventory. (that includes equipped items) It will not affect anything else, like
storage or cart.
---------------------------------------
*equip <item id>;
*autoEquip <item id>,<option>;
These commands are to equip a equipment on the attached character.
The equip function will equip the item ID given when the player has
this item in his/her inventory, while the autoequip function will
equip the given item ID when this is looted. The option parameter of
the autoequip is 1 or 0, 1 to turn it on, and 0 to turn it off.
Example(s):
//This will equip a 1104 (falchion) on the character if this is in the inventory.
equip 1104;
//The invoked character will now automatically equip a falchion when it's looted.
autoequip 1104,1;
//The invoked character will no longer automatically equip a falchion.
autoequip 1104,0;
---------------------------------------
*buyingstore <slots>;
Invokes buying store preparation window like the skill 'Open Buying Store',
without the item requirement. Amount of slots is limited by the server to
a maximum of 5 slots by default.
Example:
// Gives the player oppurtunity to buy 4 different kinds of items.
buyingstore 4;
---------------------------------------
*searchstores <uses>,<effect>;
Invokes the store search window, which allows to search for both vending
and buying stores. Parameter uses indicates, how many searches can be
started, before the window has to be reopened. Effect value affects,
what happens, when a result item is double-clicked and can be one of the
following:
0 = Shows the store's position on the mini-map and highlights the
shop sign with yellow color, when the store is on same map
as the invoking player.
1 = Directly opens the shop, regardless of distance.
Example:
// Item Universal_Catalog_Gold (10 uses, effect: open shop)
searchstores 10,1;
---------------------------------------
//
4,1.- End of item-related commands
//
---------------------------------------
*openstorage;
This will open character's Kafra storage window on the client connected to the
invoking character. It can be used from any kind of NPC or item script, not just
limited to Kafra Staff.
The storage window opens regardless of whether there are open NPC dialogs or
not, but it is preferred to close the dialog before displaying the storage
window, to avoid any disruption when both windows overlap.
mes "I will now open your stash for you";
close2;
openstorage;
end;
---------------------------------------
*openmail;
This will open a character's Mail window on the client connected to the
invoking character.
mes "Close this window to open your mail inbox.";
close2;
openmail;
end;
---------------------------------------
*openauction;
This will open the Auction window on the client connected to the invoking character.
mes "Close this window to open the Auction window.";
close2;
openauction;
end;
---------------------------------------
\\
4,2.- Guild-related commands
\\
---------------------------------------
*guildopenstorage()
This function works the same as 'openstorage' but will open a guild storage
window instead for the guild storage of the guild the invoking character belongs
to. This is a function because it returns a value - 0 if the guild storage was
opened successfully and 1 if it wasn't. (Notice, it's a ZERO upon success.)
Since guild storage is only accessible to one character at one time, it may fail
if another character is accessing the guild storage at the same time.
This will also fail and return 2 if the character does not belong to any guild.
---------------------------------------
*guildchangegm(<guild id>,<new master's name>)
This function will change the Guild Master of a guild. The ID is the guild's
id, and the new guild master's name must be passed.
Returns 1 on success, 0 otherwise.
---------------------------------------
*guildgetexp <amount>;
This will give the specified amount of guild experience points to the guild the
invoking character belongs to. It will silently fail if they do not belong to
any guild.
---------------------------------------
*guildskill <skill id>,<level>
*guildskill "<skill name>",<level>
This command will bump up the specified guild skill by the specified number of
levels. This refers to the invoking character and will only work if the invoking
character is a member of a guild AND it's guild master, otherwise no failure
message will be given and no error will occur, but nothing will happen - same
about the guild skill trying to exceed the possible maximum. The full list of
guild skills is available in 'db/skill_db.txt', these are all the GD_ skills at
the end.
The flag parameter is currently not functional and it's a mystery of what it
would actually do. (Though probably, like for character skills, it would allow
temporary bumping.) Using this command will bump the guild skill up permanently.
// This would give your character's guild one level of Approval (GD_APPROVAL ID
// 10000). Notice that if you try to add two levels of Approval, or add
// Approval when the guild already has it, it will only have one level of
// Approval afterwards.
guildskill 10000,1,0;
You might want to make a quest for getting a certain guild skill, make it hard
enough that all the guild needs to help or something. Doing this for the Glory
of the Guild skill, which allows your guild to use an emblem, is a good idea for
a fun quest. (Wasting a level point on that is really annoying :D)
---------------------------------------
//
4,2 End of guild-related commands.
//
---------------------------------------
*resetlvl <action type>;
This is a character reset command, meant mostly for rebirth script supporting
Advanced jobs, which will reset the invoking character's stats and level
depending on the action type given. Valid action types are:
1 - Base level 1, Job level 1, 0 skill points, 0 base exp, 0 job exp, wipes the
status effects (only the ones settable by 'setoption'), sets all stats to 1.
If the new job is 'Novice High', give 100 status points, give First Aid and
Play Dead skills.
2 - Base level 1, Job level 1, 0 skill points, 0 base exp, 0 job exp.
Skills and attribute values are not altered.
3 - Base level 1, base exp 0. Nothing else is changed.
4 - Job level 1, job exp 0. Nothing else is changed.
In all cases everything the character has on will be unequipped.
Even though it doesn't return a value, it is used as a function in the official
rebirth scripts. Ask AppleGirl why.
---------------------------------------
*resetstatus;
This is a character reset command, which will reset the stats on the invoking
character and give back all the stat points used to raise them previously.
Nothing will happen to any other numbers about the character.
Used in reset NPC's (duh!)
---------------------------------------
*resetskill;
This command takes off all the skill points on the invoking character, so they
only have Basic Skill blanked out (lvl 0) left, and returns the points for them
to spend again. Nothing else will change but the skills. Quest skills will also
reset if 'quest_skill_reset' option is set to Yes in 'battle_athena.conf'. If
the 'quest_skill_learn' option is set in there, the points in the quest skills
will also count towards the total.
Used in reset NPC's (duh!)
---------------------------------------
*sc_start <effect type>,<ticks>,<extra argument>{,<target ID number>};
*sc_start2 <effect type>,<ticks>,<extra argument>,<percent chance>{,<target ID number>};
*sc_start4 <effect type>,<ticks>,<value 1>,<value 2>,<value 3>,<value 4>{,<target ID number>};
*sc_end <effect type>{,<target ID number>};
These command bestow a status effect on the invoking character. This command is
used a lot in the item scripts.
// This would poison them for 10 min
sc_start SC_Poison,600000,0;
Effect type is a number of effect, 'db/const.txt' lists the common (mostly
negative) status effect types as constants, starting with 'SC_'. You can also
use this to give someone an effect of a player-cast spell:
// This will bless someone as if with Bless 10:
sc_start 10,240000,10;
Extra argument's meaning differs depending on the effect type, for most effects
caused by a player skill the extra argument means the level of the skill that
would have been used to create that effect, for others it might have no meaning
whatsoever. You can actually bless someone with a 0 bless spell level this way,
which is fun, but weird.
The target ID number, if given, will cause the status effect to appear on a
specified character, instead of the one attached to the running script. This has
not been properly tested.
'sc_start2' is perfectly equivalent, but unlike 'sc_start', a status change
effect will only occur with a specified percentage chance. 10000 given as the
chance is equivalent to a 100% chance, 0 is a zero.
'sc_start4' is just like sc_start, however it takes four parameters for the
status change instead of one. What these values are depends on the status
change in question. For example, elemental armor defense takes the following
four values:
- val1 is the first element, val2 is the resistance to the element val1.
- val3 is the second element, val4 is the resistance to said element.
eg: sc_start4 SC_DefEle,60000,Ele_Fire,20,Ele_Water,-15;
'sc_end' will remove a specified status effect. If SC_All is used (-1), it will
do a complete removal of all statuses (although permanent ones will re-apply).
You can see the full list of status effects caused by skills in
'src/map/status.h' - they are currently not fully documented, but most of that
should be rather obvious.
---------------------------------------
*skilleffect <skill id>,<number>;
*skilleffect "<skill name>",<number>;
This command displays visual and aural effects of given skill on currently
attached character. The number parameter is for skill whose visual effect
involves displaying of a number (healing or damaging). Note, that this command
will not actually use the skill, it is intended for scripts, which simulate
skill usage by the NPC, such as buffs, by setting appropriate status and
displaying the skill's effect.
mes "Be blessed!";
// Heal of 2000 HP
heal 2000,0;
skilleffect 28,2000;
// Blessing Level 10
sc_start 10,240000,10;
skilleffect 34,0;
// Increase AGI Level 5
sc_start 12,140000,5;
skilleffect 29,0;
This will heal the character with 2000 HP, buff it with Blessing Lv 10 and
Increase AGI Lv 5, and display appropriate effects.
---------------------------------------
*npcskilleffect <skill id>,<number>,<x>,<y>;
*npcskilleffect "<skill name>",<number>,<x>,<y>;
This command behaves identically to 'skilleffect', however, the effect will not
be centered on the invoking character's sprite, nor on the NPC sprite, if any,
but will be centered at map coordinates given on the same map as the invoking
character.
---------------------------------------
*specialeffect <effect number>{,<send_target>}{,"<NPC Name>"};
This command will display special effect with the given number, centered on the
specified NPCs coordinates, if any. For a full list of special effect numbers
known see 'doc/effect_list.txt'. Some effect numbers are known not to work in
some client releases. (Notably, rain is absent from any client executables
released after April 2005.)
<NPC name> parameter will display <effect number> on another NPC. If the NPC
specified does not exist, the command will do nothing. When specifying an NPC,
<send_target> must be specified when specifying an <NPC Name>, specifying AREA
will retain the default behavior of the command.
// this will make the NPC "John Doe#1"
// show the effect "EF_HIT1" specified by
// Jane Doe. I wonder what John did...
mes "[Jane Doe]";
mes "Well, I never!";
specialeffect EF_HIT1,AREA,"John Doe#1";
close;
---------------------------------------
*specialeffect2 <effect number>{,<send_target>}{,"<Player Name>"};
This command behaves identically to the 'specialeffect', but the effect will be
centered on the invoking character's sprite.
<Player name> parameter will display <effect number> on another Player than the
one currently attached to the script. Like with specialeffect, when specifying
a player, <send_target> must be supplied, specifying AREA will retain the default
behavior of the command.
---------------------------------------
*statusup <stat>;
This command will bump a specified stat of the invoking character up by one
permanently. Stats are to be given as number, but you can use these constants to
replace them:
bStr - Strength
bVit - Vitality
bInt - Intelligence
bAgi - Agility
bDex - Dexterity
bLuk - Luck
---------------------------------------
*statusup2 <stat>,<amount>;
This command will bump a specified stat of the invoking character up by the
specified amount permanently. The amount can be negative. See 'statusup'.
// This will decrease a character's Vit forever.
statusup bVit,-1;
---------------------------------------
*bonus <bonus type>,<val1>;
*bonus2 <bonus type>,<val1>,<val2>;
*bonus3 <bonus type>,<val1>,<val2>,<val3>;
*bonus4 <bonus type>,<val1>,<val2>,<val3>,<val4>;
*bonus5 <bonus type>,<val1>,<val2>,<val3>,<val4>,<val5>;
These commands are meant to be used in item scripts. They will probably work
outside item scripts, but the bonus will not persist for long. They, as
expected, refer only to an invoking character.
You can find the full list of possible bonuses and which command to use for each
kind in 'doc/item_bonus.txt'.
---------------------------------------
*autobonus <bonus script>,<rate>,<duration>{,<flag>,{<other script>}};
*autobonus2 <bonus script>,<rate>,<duration>{,<flag>,{<other script>}};
*autobonus3 <bonus script>,<rate>,<duration>,<skill id>,{<other script>};
*autobonus3 <bonus script>,<rate>,<duration>,"<skill name>",{<other script>};
These commands are meant to be used in item scripts. They will probably work
outside item scripts, but the bonus will not persist for long. They, as
expected, refer only to an invoking character.
What these commands do is 'attach' a script to the player which will get
executed on attack (or when attacked in the case of autobonus2).
Rate is the trigger rate of the script (1000 = 100%).
Duration is the time that the bonus will last for since the script has triggered.
The optional argument 'flag' is used to classify the type of attack where the script
can trigger (it shares the same flags as the bAutoSpell bonus script):
Range criteria:
BF_SHORT: Trigger on melee attack
BF_LONG: Trigger on ranged attack
Default: BF_SHORT+BF_LONG
Attack type criteria:
BF_WEAPON: Trigger on weapon skills
BF_MAGIC: Trigger on magic skills
BF_MISC: Trigger on misc skills
Default: BF_WEAPON
Skill criteria:
BF_NORMAL: Trigger on normal attacks
BF_SKILL: Trigger on skills
default: If the attack type is BF_WEAPON (only) BF_NORMAL is used,
otherwise BF_SKILL+BF_NORMAL is used.
The difference between the optional argument 'other script' and the 'bonus script' is that,
the former one triggers only when attacking(or attacked) and the latter one runs on
status calculation as well, which makes sure, within the duration, the "bonus" that get
lost on status calculation is restored. So, 'bonus script' is technically supposed to accept
"bonus" command only. And we usually use 'other script' to show visual effects.
In all cases, when the script triggers, the attached player will be the one
who holds the bonus. There is currently no way of knowing within this script
who was the other character (the attacker in autobonus2, or the target in
autobonus and autobonus3).
//Grants a 1% chance of starting the state "all stats +10" for 10 seconds when
//using weapon or misc attacks (both melee and ranged skills) and shows a special
//effect when the bonus is active.
autobonus "{ bonus bAllStats,10; }",10,10000,BF_WEAPON|BF_MISC,"{ specialeffect2 EF_FIRESPLASHHIT; }";
---------------------------------------
*skill <skill id>,<level>{,<flag>};
*skill "<skill name>",<level>{,<flag>};
*addtoskill <skill id>,<level>{,<flag>};
*addtoskill "<skill name>",<level>{,<flag>};
These commands will give the invoking character a specified skill. This is also
used for item scripts.
Level is obvious. Skill id is the ID number of the skill in question as per
'db/skill_db.txt'. It is not known for certain whether this can be used to give
a character a monster's skill, but you're welcome to try with the numbers given
in 'db/mob_skill_db.txt'.
Flag is 0 if the skill is given permanently (will get written with the character
data) or 1 if it is temporary (will be lost eventually, this is meant for card
item scripts usage.). The flag parameter is optional, and defaults to 1 in
'skill' and to 2 in 'addtoskill'.
Flag 2 means that the level parameter is to be interpreted as a stackable
additional bonus to the skill level. If the character did not have that skill
previously, they will now at 0+the level given.
// This will permanently give the character Stone Throw (TF_THROWSTONE,152), at
// level 1.
skill 152,1,0;
---------------------------------------
*nude;
This command will unequip anything equipped on the invoking character.
It is not required to do this when changing jobs since 'jobchange' will unequip
everything not equippable by the new job class anyway.
---------------------------------------
*disguise <Monster ID>;
*undisguise;
This command disguises the current player with a monster sprite.
The disguise lasts until 'undisguise' is issued or the player logs out.
Example:
disguise 1002; //Yay! You're a Poring!!!
next;
undisguise; //Yay!!!! You're a human again!!
---------------------------------------
\\
4,3 Marriage-related commands
\\
---------------------------------------
*marriage("<spouse name>");
This function will marry two characters, the invoking character and the one
referred to by name given, together, setting them up as each other's marriage
partner. No second function call has to be issued (in current SVN at least) to
make sure the marriage works both ways. The function returns 1 upon success, or
0 if the marriage could not be completed, either because the other character
wasn't found or because one of the two characters is already married.
This will do nothing else for the marriage except setting up the spouse ID for
both of these characters. No rings will be given and no effects will be shown.
---------------------------------------
*wedding;
This command will call up wedding effects - the music and confetti - centered on
the invoking character. Example can be found in the wedding script.
---------------------------------------
*divorce()
This function will "un-marry" the invoking character from whoever they were
married to. Both will no longer be each other's marriage partner, (at least in
current SVN, which prevents the cases of multi-spouse problems). It will return
1 upon success or 0 if the character was not married at all.
This function will also destroy both wedding rings and send a message to both
players, telling them they are now divorced.
---------------------------------------
//
4,3.- End of marriage-related commands
//
---------------------------------------
*pcfollow <id>,<target id>;
*pcstopfollow <id>;
Makes a character follow or stop following someone. This command does the same as the @follow command.
The main difference is that @follow can use character names, and this commands needs the Account ID for the target.
Example(s):
//This will make Aaron follow Bullah, when both of these characters are online.
PCFollow getCharID(3,"Aaron"),getCharID(3,"Bullah");
//Makes Aaron stop following whoever he is following.
PCStopFollow getCharID(3,"Aaron");
---------------------------------------
*pcblockmove <id>,<option>;
Prevents the given ID from moving when the option != 0, 0 enables the ID to move again.
ID should be able to be GID of a monster/NPC or AID from a character.
Example(s):
//prevents the current char from moving away;
pcblockmove getcharid(3),1;
//enables the current char to move again.
pcblockmove getcharid(3),0;
---------------------------------------
==================================
|5.- Mob / NPC -related commands.|
==================================
---------------------------------------
*monster "<map name>",<x>,<y>,"<name to show>",<mob id>,<amount>{,"<event label>"};
*areamonster "<map name>",<x1>,<y1>,<x2>,<y2>,"<name to show>",<mob id>,<amount>{,"<event label>"};
This command will spawn a monster on the specified coordinates on the specified
map. If the script is invoked by a character, a special map name, "this", will
be recognized to mean the name of the map the invoking character is located at.
This command works fine in the item scripts.
The same command arguments mean the same things as described above in the
beginning of this document when talking about permanent monster spawns. Monsters
spawned in this manner will not respawn upon being killed.
Unlike the permanent monster spawns, if the mob id is -1, a random monster will
be picked from the entire database according to the rules configured in the
server for dead branches. This will work for all other kinds of non-permanent
monster spawns.
The only very special thing about this command is an event label, which is an
optional parameter. This label is written like '<NPC object name>::<label name>'
and upon the monster being killed, it will execute the script inside of the
specified NPC object starting from the label given. The RID of the player
attached at this execution will be the RID of the killing character.
monster "place",60,100,"Poring",1002,1,"NPCNAME::OnLabel";
The coordinates of 0,0 will spawn the monster on a random place on the map.
The 'areamonster' command works much like the 'monster' command and is not
significantly different, but spawns the monsters within a square defined by
x1/y1-x2/y2.
Simple monster killing script:
<Normal NPC object definition. Let's assume you called him NPCNAME.>
mes "[Summon Man]";
mes "Want to start the kill?";
next;
menu "Yes",L_Yes,"No",-;
mes "[Summon Man]";
mes "Come back later";
close;
L_Yes:
monster "prontera",0,0,"Quest Poring",1002,10,"NPCNAME::OnPoringKilled";
// By using 0,0 it will spawn them in a random place.
mes "[Summon Man]";
mes "Now go and kill all the Poring I summoned";
// He summoned ten.
close;
OnPoringKilled:
set $PoringKilled,$PoringKilled+1;
if ($PoringKilled==10) goto L_AllDead;
end;
L_AllDead:
announce "Summon Man: Well done all the poring are dead",3;
set $PoringKilled,0;
end;
For more good examples see just about any official 2-1 or 2-2 job quest script.
---------------------------------------
*areamobuseskill "<map name>",<x>,<y>,<range>,<mob id>,<skill id>,<skill level>,<cast time>,<cancelable>,<emotion>,<target type>;
*areamobuseskill "<map name>",<x>,<y>,<range>,<mob id>,"<skill name>",<skill level>,<cast time>,<cancelable>,<emotion>,<target type>;
This command will make all monsters of the specified mob ID in the specified
area use the specified skill. Map name, x, and y define the center of the area,
which extending <range> cells in each direction (ex: a range of 3 would create
a 7x7 square). The skill can be specified by skill ID or name. <cast time> is in
milliseconds (1000 = 1 second), and the rest should be self-explanatory.
<target type> can be:
0 = self
1 = the mob's current target
2 = the mob's master
3 = random target
Example:
// spawn 1 Shining Plant in the 5x5 area centered on (155,188)
areamonster "prontera",153,186,157,190,"Shining Plant",1083,1;
// make the plant cast level 10 Cold Bolt on a random target
areamobuseskill "prontera",155,188,2,1083,"MG_COLDBOLT",10,3000,1,e_gg,3;
---------------------------------------
*killmonster "<map name>","<event label>"{,<type>};
This command will kill all monsters that were spawned with 'monster' or
'addmonster' and have a specified event label attached to them. Commonly used to
get rid of remaining quest monsters once the quest is complete.
If the label is given as "All", all monsters which have their respawn times set
to -1 (like all the monsters summoned with 'monster' or 'areamonster' script
command, and all monsters summoned with GM commands, but no other ones - that
is, all non-permanent monsters) on the specified map will be killed regardless
of the event label value.
As of r12876 killmonster now supports an optional argument type. Using 1 for type
will make the command fire "OnMyMobDead" events from any monsters that do die
as a result of this command.
---------------------------------------
*killmonsterall "<map name>"{,<type>};
This command will kill all monsters on a specified map name, regardless of how
they were spawned or what they are. As of r12873, The behavior has changed slightly.
In light of a label behavior fix for mob spawning commands that will now allow the label to
trigger when there is no player, killmonsterall has also been modified to support this.
Using this the normal/old way means labels don't trigger when a player didn't
attack/kill a monster. This is because it breaks compatibility with older scripts if
forced to use the new method. However, if you wish to use the new label type with this
command, simply use 1 for type. Any other number won't be recognized.
---------------------------------------
*strmobinfo(<type>,<monster id>);
This function will return information about a monster record in the database, as
per 'db/mob_db.txt'. Type is the kind of information returned. Valid types are:
1 - 'english name' field in the database, a string.
2 - 'japanese name' field in the database, a string.
All other returned values are numbers:
3 - Level.
4 - Maximum HP.
5 - Maximum SP.
6 - Experience reward.
7 - Job experience reward.
---------------------------------------
*mobcount("<map name>","<event label>")
This function will count all the monsters on the specified map that have a given
event label and return the number or 0 if it can't find any. Naturally, only
monsters spawned with 'monster' and 'areamonster' script commands can be like
this.
However, apparently, if you pass this function an empty string for the event
label, it should return the total count of normal permanently respawning
monsters instead. With the current dynamic mobs system, where mobs are not kept
in memory for maps with no actual people playing on them, this will return a 0
for any such map.
---------------------------------------
*clone "<map name>",<x>,<y>,"<event>",<char id>{,<master_id>{,<mode>{,<flag>,<duration>}}}
This command creates a monster which is a copy of another player. The first
four arguments serve the same purpose as in the monster script command, The
<char id> is the character id of the player to clone (player must be online).
If <master id> is given, the clone will be a 'slave/minion' of it. Master_id
must be a character id of another online player.
The mode can be specified to determine the behavior of the clone, it's
values are the same as the ones used for the mode field in the mob_db. The
default mode is aggressive, assists, can move, can attack.
Flag can be either zero or one currently. If zero, the clone is a normal
monster that'll target players, if one, it is considered a summoned monster,
and as such, it'll target other monsters. Defaults to zero.
The duration specifies how long the clone will live before it is auto-removed.
Specified in seconds, defaults to no limit (zero).
Returned value is the monster ID of the spawned clone. If command fails,
returned value is zero.
---------------------------------------
*summon "Monster name",<monster id>{,<Time Out>{,"event label"}};
This command will summon a monster. (see also 'monster') Unlike monsters spawned
with other commands, this one will set up the monster to fight to protect the
invoking character. Monster name and mob id obey the same rules as the one given
at the beginning of this document for permanent monster spawns with the
exceptions mentioned when describing 'monster' command.
The effect for the skill 'Call Homonuculus' will be displayed centered on the
invoking character.
Timeout is the time in milliseconds the summon lives, and is set default
to 60000 (1 minute). Note that also the value 0 will set the timer to default,
and it is not possible to create a spawn that lasts forever.
If an event label is given, upon the monster being killed, the event label will
run as if by 'donpcevent'.
// Will summon a dead branch-style monster to fight for the character.
summon "--ja--",-1;
---------------------------------------
*homevolution;
This command will try to evolve the current player's homunculus.
If it doesn't work, the /swt emotion is shown.
To evolve a homunculus, the invoking player must have a homunculus,
the homunculus must not be the last evolution and
the homunculus must have above 91000 intimacy with it's owner.
---------------------------------------
*unitwalk <GID>,<x>,<y>;
*unitwalk <GID>,<mapid>;
This is one command, but can be used in two ways. If only the first argument is given,
the unit whose GID is given will start walking towards the map with the given mapid
(we believe these are the map-indexes found in db/map_index.txt).
When 2 arguments are passed, the given unit will walk to the given x,y coordinates on
the map where the unit currently is.
Example(s):
//Will move/walk the poring we made to the coordinates 150,150
unitwalk .GID,150,150;
//Will move the poring towards alberta (if my assumed map-indexes are correct).
unitwalk .GID,3;
---------------------------------------
*unitkill <GID>;
*unitwarp <GID>,<Mapname>,<x>,<y>;
*unitattack <GID>,<Target ID>;
*unitstop <GID>;
*unittalk <GID>,<Text>;
*unitemote <GID>,<Emote>;
Okay, these commands should be fairly self explaining.
For the emotions, you can look in db/const.txt for prefixes with e_
PS: unitwarp supports a <GID> of zero, which causes the executor of the script to be affected. This can be used with OnTouchNPC to warp monsters:
OnTouchNPC:
unitwarp 0,"this",-1,-1;
---------------------------------------
*disablenpc "<NPC object name>";
*enablenpc "<NPC object name>";
These two commands will disable and enable, respectively, an NPC object
specified by name. The disabled NPC will disappear from sight and will no longer
be triggerable in the normal way. It is not clear whether it will still be
accessible through 'donpcevent' and other triggering commands, but it probably
will be. You can disable even warp NPCs if you know their object names, which is
an easy way to make a map only accessible through walking half the time. Then
you 'enablenpc' them back.
You can also use these commands to create the illusion of an NPC switching
between several locations, which is often better than actually moving the NPC -
create one NPC object with a visible and a hidden part to their name, make a few
copies, and then disable all except one.
---------------------------------------
*hideonnpc "<NPC object name>";
*hideoffnpc "<NPC object name>";
These commands will make the NPC object specified display as hidden/visible,
even though not actually disabled per se. Hidden as in thief Hide skill, but
unfortunately, not detectable by Ruwach or Sight.
As they are now, these commands are pointless, it is suggested to use
'disablenpc'/'enablenpc', because these two commands actually unload the NPC
sprite location and other accompanying data from memory when it is not used.
However, you can use these for some quest ideas (such as cloaking NPCs talking
while hidden then revealing.... you can wonder around =P
---------------------------------------
*doevent "<NPC object name>::<event label>";
This command will start a new execution thread in a specified NPC object at the
specified label. The execution of the script running this command will not stop.
No parameters may be passed with a doevent call.
The script of the NPC object invoked in this manner will run as if it's been
invoked by the RID that was active in the script that issued a 'doevent'.
place,100,100,1%TAB%script%TAB%NPC%TAB%53,{
mes "This is what you will see when you click me";
close;
OnLabel:
mes "This is what you will see if the doevent is activated";
close;
}
....
doevent "NPC::OnLabel";
---------------------------------------
*donpcevent "{NPC NAME}::<event label>";
This command invokes the event label code within an another NPC or NPCs. If
event label has the form "NpcName::OnLabel", then only given NPC's event label
will be invoked (much like 'goto' into another NPC). If the form is "::OnLabel"
(NpcName omitted), the event code of all NPCs with given label will be invoked,
one after another. In both cases the invoked script will run without an attached
RID, whether or not the invoking script was attached to a player. The event
label name is required to start with On.
This command can be used to make other NPCs act, as if they were responding to
the invoking NPC's actions, such as using an emotion or talking.
place,100,100,1%TAB%script%TAB%NPC%TAB%53,{
mes "Hey NPC2 copy what I do";
close2;
set .@emote, rand(1,30);
donpcevent "NPC2::OnEmote";
OnEmote:
emotion .@emote;
end;
}
place,102,100,1%TAB%script%TAB%NPC2%TAB%53,{
mes "Hey NPC copy what I do";
close2;
set .@emote, rand(1,30);
donpcevent "NPC::OnEmote";
OnEmote:
emotion .@emote;
end;
}
Whichever of the both NPCs is talked to, both will show a random emotion at the
same time.
---------------------------------------
*cmdothernpc "<npc name>","<command>";
This is simply "donpcevent <npc name>::OnCommand<command>".
It is an approximation of official server script language's 'cmdothernpc'.
---------------------------------------
*npctalk "<message>";
This command will display a message to the surrounding area as if the NPC object
running it was a player talking - that is, above their head and in the chat
window. The display name of the NPC will get appended in front of the message to
complete the effect.
// This will make everyone in the area see the NPC greet the character
// who just invoked it.
npctalk "Hello "+strcharinfo(0)+" how are you";
---------------------------------------
*setnpcdisplay("<npc name>", "<display name>", <class id>, <size>)
*setnpcdisplay("<npc name>", "<display name>", <class id>)
*setnpcdisplay("<npc name>", "<display name>")
*setnpcdisplay("<npc name>", <class id>)
Changes the display name and/or display class of the target NPC.
Returns 0 is successful, 1 if the NPC does not exist.
Size is 0 = normal 1 = small 2 = big.
Since trunk r11779
---------------------------------------
\\
5,1.- Time-related commands
\\
---------------------------------------
*addtimer <ticks>,"NPC::OnLabel";
*deltimer "NPC::OnLabel";
*addtimercount <ticks>,"NPC::OnLabel";
These commands will create, destroy, and delay a countdown timer - 'addtimer' to
create, 'deltimer' to destroy and 'addtimercount' to delay it by the specified
number of ticks. For all three cases, the event label given is the identifier of
that timer. The timer runs on the character object that is attached to the script,
and can have multiple instances. When the label is run, it is run as if the player that
the timer runs on has clicked the NPC.
When this timer runs out, a new execution thread will start in the specified NPC
object at the specified label.
The ticks are given in 1/1000ths of a second.
One more thing. These timers are stored as part of player data. If the player
logs out, all of these get immediately deleted, without executing the script.
If this behavior is undesirable, use some other timer mechanism (like 'sleep').
Example 1:
<NPC Header> {
dispbottom "Starting a 5 second timer...";
addtimer 5000, strnpcinfo(3)+"::On5secs";
end;
On5secs:
dispbottom "5 seconds have passed!";
end;
}
---------------------------------------
*initnpctimer{ "<NPC name>" {, <Attach Flag>} } |
{ "<NPC name>" | <Attach Flag> };
*stopnpctimer{ "<NPC name>" {, <Detach Flag>} } |
{ "<NPC name>" | <Detach Flag> };
*startnpctimer{ "<NPC name>" {, <Attach Flag>} } |
{ "<NPC name>" | <Attach Flag> };
*setnpctimer <tick>{,"<NPC name>"};
*getnpctimer(<type of information>{,"<NPC name>"})
*attachnpctimer {"<character name>"};
*detachnpctimer {"<NPC name>"};
This set of commands and functions will create and manage an NPC-based timer.
The NPC name may be omitted, in which case the calling NPC is used as target.
Contrary to addtimer/deltimer commands which let you have many different timers
referencing different labels in the same NPC, each with their own countdown,
'initnpctimer' can only have one per NPC object. But it can trigger many labels
and let you know how many were triggered already and how many still remain.
This timer is counting up from 0 in ticks of 1/1000ths of a second each. Upon
creating this timer, the execution will not stop, but will happily continue
onward. The timer will then invoke new execution threads at labels
"OnTimer<time>:" in the NPC object it is attached to.
To create the timer, use the 'initnpctimer', which will start it running.
'stopnpctimer' will pause the timer, without clearing the current tick, while
'startnpctimer' will let the paused timer continue.
By default timers do not have a RID attached, which lets them continue even
if the player that started them logs off. To attach a RID to a timer, you can
either use the optional "attach flag" when using 'initnpctimer/startnpctimer',
or do it manually by using 'attachnpctimer'. Likewise, the optional flag of
stopnpctimer lets you detach any RID after stopping the timer, and by using
'detachnpctimer' you can detach a RID at any time.
Normally there is only a single timer per NPC, but as an exception, as long as
you attach a player to the timer, you can have multiple timers running at once,
because these will get stored on the players instead of the NPC.
NOTE: You need to attach the RID before the timer _before_ you start it to
get a player-attached timer. Otherwise it'll stay a NPC timer (no effect).
If the player that is attached to the npctimer logs out, the "OnTimerQuit:"
event label of that NPC will be triggered, so you can do the appropriate
cleanup (the player is still attached when this event is triggered).
The 'setnpctimer' command will explicitly set the timer to a given tick.
'getnpctimer' provides timer information. Its parameter defines what type:
0 - Will return the current tick count of the timer.
1 - Will return 1 if there are remaining "OnTimer<ticks>:" labels in the
specified NPC waiting for execution.
2 - Will return the number of times the timer has triggered and will trigger
an "OnTimer<tick>:" label in the specified NPC.
Example 1:
<NPC Header> {
// We need to use attachnpctimer because the mes command below needs RID attach
attachnpctimer;
initnpctimer;
npctalk "I cant talk right now, give me 10 seconds";
end;
OnTimer5000:
npctalk "Ok 5 seconds more";
end;
OnTimer6000:
npctalk "4";
end;
OnTimer7000:
npctalk "3";
end;
OnTimer8000:
npctalk "2";
end;
OnTimer9000:
npctalk "1";
end;
OnTimer10000:
stopnpctimer;
mes "[Man]";
mes "Ok we can talk now";
detachnpctimer;
// and remember attachnpctimer and detachnpctimer can only use while the NPC timer is not running !
}
Example 2:
OnTimer15000:
npctalk "Another 15 seconds have passed.";
initnpctimer; // You have to use 'initnpctimer' instead of 'setnpctimer 0'.
// This is equal to 'setnpctimer 0' + 'startnpctimer'.
// Alternatively, you can also insert another 'OnTimer15001' label so that the timer won't stop.
end;
// This OnInit label will run when the script is loaded, so that the timer
// is initialized immediately as the server starts. It is dropped back to 0
// every time the NPC says something, so it will cycle continuously.
OnInit:
initnpctimer;
end;
Example 3:
mes "[Man]";
mes "I have been waiting "+(getnpctimer(0)/1000)+" seconds for you";
// we divide the timer returned by 1000 cause it will be displayed in
// milliseconds otherwise
close;
Example 4:
mes "[Man]";
mes "Ok I will let you have 30 sec more";
close2;
setnpctimer (getnpctimer(0)-30000);
// Notice the 'close2'. If there were a 'next' there the timer would be
// changed only after the player pressed the 'next' button.
end;
---------------------------------------
*sleep {<milliseconds>};
*sleep2 {<milliseconds>};
*awake "<NPC name>";
These commands are used to control the pause of a NPC.
sleep and sleep2 will pause the script for the given amount of milliseconds.
Awake is used to cancel a sleep. When awake is called on a NPC it will run as
if the sleep timer ran out, and thus making the script continue. Sleep and sleep2
basically do the same, but the main difference is that sleep will not keep the rid,
while sleep2 does.
Examples:
sleep 10000; //pause the script for 10 seconds and ditch the RID (so no player is attached anymore)
sleep2 5000; //pause the script for 5 seconds, and continue with the RID attached.
awake "NPC"; //Cancels any running sleep timers on the NPC 'NPC'.
---------------------------------------
*progressbar "<color>",<seconds>;
This command works almost like sleep2, but displays a progress bar
above the head of the currently attached character (like cast bar).
Once the given amount of seconds passes, the script resumes. If the
character moves while the progress bar progresses, it is aborted and
the script ends. The color format is in RGB (0xRRGGBB). The color is
currently ignored by the client and appears always green.
---------------------------------------
//
5,1.- End of time-related commands
//
*announce "<text>",<flag>{,<fontColor>{,<fontType>{,<fontSize>{,<fontAlign>{,<fontY>}}}}};
This command will broadcast a message to all or most players, similar to
@kami/@kamib GM commands.
announce "This will be shown to everyone at all in yellow.",0;
The region the broadcast is heard in (target), source of the broadcast
and the color the message will come up as is determined by the flags.
The flag values are coded as constants in db/const.txt to make them easier to use.
Target flags:
- bc_all: Broadcast message is sent server-wide (default).
- bc_map: Message is sent to everyone in the same map as the source of the broadcast (see below).
- bc_area: Message is sent to players in the vicinity of the source.
- bc_self: Message is sent only to current player.
You cannot use more than one target flag.
Source flags:
- bc_pc: Broadcast source is the attached player (default).
- bc_npc: Broadcast source is the NPC, not the player attached to the script
(useful when a player is not attached or the message should be sent to those
nearby the NPC).
You cannot use more than one source flag.
Special flags:
- bc_yellow: Broadcast will be displayed in yellow color (default).
- bc_blue: Broadcast will be displayed in blue color.
- bc_woe: Indicates that this broadcast is 'WoE Information' that can be disabled client-side.
Due to the way client handles broadcasts, it is impossible to set both bc_blue and bc_woe.
The optional parameters allow usage of broadcasts in custom colors, font-weights, sizes etc.
If any of the optional parameters is used, special flag is ignored.
Optional parameters may not work well (or at all) depending on a game client used.
The color parameter is a single number which can be in hexadecimal notation.
For example:
announce "This will be shown to everyone at all in green.",bc_all,0x00FF00;
Will display a global announce in green. The color format is in RGB (0xRRGGBB).
In official scripts only two font-weights (types) are used:
- normal (FW_NORMAL = 400, default),
- bold (FW_BOLD = 700).
Default font size is 12.
Using this for private messages to players is probably not that good an idea,
but it can be used instead in NPCs to "preview" an announce.
// This will be a private message to the player using the NPC that made the
// announcement
announce "This is my message just for you",bc_blue|bc_self;
// This will be shown on everyones screen that is in sight of the NPC.
announce "This is my message just for you people here",bc_npc|bc_area;
---------------------------------------
*mapannounce "<map name>","<text>",<flag>{,<fontColor>{,<fontType>{,<fontSize>{,<fontAlign>{,<fontY>}}}}}};
This command will work like 'announce' but will only broadcast to characters
currently residing on the specified map. The flag and optional parameters
parameters are the same as in 'announce', but target and source flags are ignored.
---------------------------------------
*areaannounce "<map name>",<x1>,<y1>,<x2>,<y2>,"<text>",<flag>{,<fontColor>{,<fontType>{,<fontSize>{,<fontAlign>{,<fontY>}}}}}};
This command works like 'announce' but will only broadcast to characters
residing in the specified x1/y1-x2/y2 rectangle on the map given. The flags and
optional parameters are the same as in 'announce', but target and source flags are ignored.
areaannounce "prt_church",0,0,350,350,"God's in his heaven, all right with the world",0;
---------------------------------------
*callshop "<name>",<option>;
These are a series of commands used to create dynamic shops.
The callshop function calls a invisible shop (view -1) as if the player clicked on it.
For the options on callShop:
0 = The normal window (buy, sell and cancel)
1 = The buy window
2 = The sell window
Example(s):
callshop "DaShop",1; //Will call the shop named DaShop and opens the buy menu.
The shop which is called by callshop (as long as an npcshop* command is executed
from that NPC (see note 1)) will trigger the labels OnBuyItem and OnSellitem. These
labels can take over handling for relatively the buying of items from the shop
and selling the items to a shop. Via these labels you can customize the way an item
is bought or sold by a player.
In the OnBuyItem, two arrays are set (@bought_nameid and @bought_quantity), which
hold information about the name id (item id) sold and the amount sold of it. Same
goes for the OnSellItem label, only the variables are named different
(@sold_nameid, @sold_quantity, @sold_refine, @sold_attribute, @sold_identify,
@sold_card1, @sold_card2, @sold_card3, @sold_card4). An example on a shop comes
with rAthena, and can be found in the doc/sample/npc_dynamic_shop.txt file.
This example shows how to use the labels and their set variables to create a dynamic shop.
Note 1: These labels will only be triggered if a npcshop* command is executed, this is
because these commands set a special data on the shop NPC,named master_nd in the source.
The OnSellItem and OnBuyItem are triggered in the NPC whose master_nd is given in the shop.
This was found out thanks to 'Hondacrx', noticing the OnBuyItem wasn't triggered unless
npcshopitem was used. After rechecking the source, I found what caused this.
---------------------------------------
*npcshopitem "<name>",<item id>,<price>{,<item id>,<price>{,<item id>,<price>{,...}}}
This command lets you override the contents of an existing NPC shop or cashshop. The
current sell list will be wiped, and only the items specified with the price
specified will be for sale.
The function returns 1 if shop was updated successfully, or 0 if not found.
Note that you cannot use -1 to specify default selling price!
---------------------------------------
*npcshopadditem "<name>",<item id>,<price>{,<item id>,<price>{,<item id>,<price>{,...}}}
This command will add more items at the end of the selling list for the
specified NPC shop or cashshop. If you specify an item already for sell, that item will
appear twice on the sell list.
The function returns 1 if shop was updated successfully, or 0 if not found.
Note that you cannot use -1 to specify default selling price!
---------------------------------------
*npcshopdelitem "<name>",<item id>{,<item id>{,<item id>{,...}}}
This command will remove items from the specified NPC shop or cashshop.
If the item to remove exists more than once on the shop, all instances will be
removed.
Note that the function returns 1 even if no items were removed. The return
value is only to confirm that the shop was indeed found.
---------------------------------------
*npcshopattach "<name>"{,<flag>}
This command will attach the current script to the given NPC shop.
When a script is attached to a shop, the events "OnBuyItem" and "OnSellItem"
of your script will be executed whenever a player buys/sells from the shop.
Additionally, the arrays @bought_nameid[], @bought_quantity[] or @sold_nameid[]
and @sold_quantity[] will be filled up with the items and quantities
bought/sold.
The optional parameter specifies whether to attach ("1") or detach ("0") from
the shop (the default is to attach). Note that detaching will detach any NPC
attached to the shop, even if it's from another script, while attaching will
override any other script that may be already attached.
The function returns 0 if the shop was not found, 1 otherwise.
---------------------------------------
*waitingroom "<chatroom name>",<limit>{,<event label>,<trigger>,<required zeny>,<min lvl>,<max lvl>};
This command will create a chat room, owned by the NPC object running this
script and displayed above the NPC sprite.
The maximum length of a chat room name is 60 letters.
The limit is the maximum number of people allowed to enter the chat room. If the
optional event and trigger parameters are given, the event label
("<NPC object name>::<label name>") will be invoked as if with a 'doevent' upon
the number of people in the chat room reaching the given triggering amount.
// The NPC will just show a box above its head that says "Hello World", clicking
// it will do nothing, since the limit is zero.
waitingroom "Hello World",0;
// The NPC will have a box above its head, it will say "Disco - Waiting Room"
// and will have 8 waiting slots. Clicking this will enter the chat room, where
// the player will be able to wait until 8 people accumulate. Once this happens,
// it will cause the NPC "Bouncer" run the label "OnStart"
waitingroom "Disco - Waiting Room",8,"Bouncer::OnStart",8;
// The NPC will have a box above its head, it will say "Party - Waiting Room"
// and will have 8 waiting slots. Clicking this will allow a player who has
// 5000 zeny and lvl 50~99 to enter the chat room, where the player will be
// able to wait until 8 people accumulate. Once this happens, it will cause
// the NPC "Bouncer" run the label "OnStart"
waitingroom "Party - Waiting Room",5,"Bouncer::OnStart",8,5000,50,99;
Creating a waiting room does not stop the execution of the script and it will
continue to the next line.
For more examples see the 2-1 and 2-2 job quest scripts which make extensive use
of waiting rooms.
---------------------------------------
*delwaitingroom {"<NPC object name"};
This command will delete a waiting room. If no parameter is given, it will
delete a waiting room attached to the NPC object running this command, if it is,
it will delete a waiting room owned by another NPC object. This is the only way
to get rid of a waiting room, nothing else will cause it to disappear.
It's not clear what happens to a waiting room if the NPC is disabled with
'disablenpc', by the way.
---------------------------------------
*enablewaitingroomevent {"<NPC object name>"};
*disablewaitingroomevent {"<NPC object name>"};
*enablearena;
*disablearena;
This will enable and disable triggering the waiting room event (see
'waitingroom') respectively. Optionally giving an NPC object name will do that
for a specified NPC object. The chat room will not disappear when triggering is
disabled and enabled in this manner and players will not be kicked out of it.
Enabling a chat room event will also cause it to immediately check whether the
number of users in it exceeded the trigger amount and trigger the event
accordingly.
Normally, whenever a waiting room was created to make sure that only one
character is, for example, trying to pass a job quest trial, and no other
characters are present in the room to mess up the script.
The 'enablearena'/'disablearena' commands are just aliases with no parameter.
These are supposedly left here for compatibility with official server scripts,
but no rAthena script uses these at the moment.
---------------------------------------
*getwaitingroomstate(<information type>{,"<NPC object name>"})
This function will return information about the waiting room state for the
attached waiting room or for a waiting room attached to the specified NPC if
any.
The valid information types are:
0 - Number of users currently chatting.
1 - Maximum number of users allowed.
2 - Will return 1 if the waiting room has a trigger set.
0 otherwise.
3 - Will return 1 if the waiting room is currently disabled.
0 otherwise.
4 - The Title of the waiting room (string)
5 - Password of the waiting room, if any. Pointless, since there is no way to
set a password on a waiting room right now.
16 - Event name of the waiting room (string)
32 - Whether or not the waiting room is full.
33 - Whether the amount of users in the waiting room is higher than the trigger
number.
---------------------------------------
*warpwaitingpc "<map name>",<x>,<y>{,<number of people>};
This command will warp the amount of characters equal to the trigger number of
the waiting room chat attached to the NPC object running this command to the
specified map and coordinates, kicking them out of the chat. Those waiting the
longest will get warped first. It can also do a random warp on the same map
("Random" instead of map name) and warp to the save point ("SavePoint").
The list of characters to warp is taken from the list of the chat room members.
Those not in the chat room will not be considered even if they are talking to
the NPC in question. If the number of people is given, exactly this much people
will be warped.
This command can also keep track of who just got warped. It does this by setting
special variables:
$@warpwaitingpc[] is an array containing the account_id numbers of the
characters who were just warped.
$@warpwaitingpcnum contains the number of the character it just warped.
See also 'getpartymember' for advice on what to do with those variables.
The obvious way of using this effectively would be to set up a waiting room for
two characters to be warped onto a random PVP map for a one-on-one duel, for
example.
---------------------------------------
*kickwaitingroomall {"<NPC object name>"};
This command kicks everybody out of a specified waiting room chat.
---------------------------------------
*setmapflagnosave "<map name>","<alternate map name>",<x>,<y>;
This command sets the 'nosave' flag for the specified map and also gives an
alternate respawn-upon-relogin point.
It does not make a map impossible to make a save point on as you would normally
think, 'savepoint' will still work. It will, however, make the specified map
kick the reconnecting players off to the alternate map given to the coordinates
specified.
---------------------------------------
*setmapflag "<map name>",<flag>;
This command marks a specified map with a map flag given. Map flags alter the
behavior of the map, you can see the list of the available ones in
'db/const.txt' under 'mf_'.
The map flags alter the behavior of the map regarding teleporting (mf_nomemo,
mf_noteleport, mf_nowarp, mf_nogo), storing location when disconnected
(mf_nosave), dead branch usage (mf_nobranch), penalties upon death
(mf_nopenalty, mf_nozenypenalty), PVP behavior (mf_pvp, mf_pvp_noparty,
mf_pvp_noguild), WoE behavior (mf_gvg,mf_gvg_noparty), ability to use
skills or open up trade deals (mf_notrade, mf_novending, mf_noskill, mf_noicewall),
current weather effects (mf_snow, mf_fog, mf_sakura, mf_leaves, mf_rain, mf_clouds,
mf_fireworks) and whether night will be in effect on this map (mf_nightenabled).
---------------------------------------
*removemapflag "<map name>",<flag>;
This command removes a mapflag from a specified map.
See 'setmapflag' for a list of mapflags.
---------------------------------------
*getmapflag("<map name>",<flag>)
This command checks the status of a given mapflag and returns the mapflag's state.
0 means OFF, and 1 means ON. See 'setmapflag' for a list of mapflags.
---------------------------------------
*setbattleflag "<battle flag>",<value>;
*getbattleflag("<battle flag>")
Sets or gets the value of the given battle flag.
Battle flags are the flags found in the battle/*.conf files and is also used in Lupus' variable rates script.
Example(s):
//will set the base experience rate to 20x (2000%)
setBattleFlag "base_exp_rate",2000;
//will return the value of the base experience rate (when used after the above example, it would print 2000).
mes getBattleFlag("base_exp_rate");
---------------------------------------
*warpportal <x>,<y>,"<mapname>",<x>,<y>;
Creates a warp Portal as if a acolyte class character did it.
The first x and y is the place of the warp portal on the map where the NPC is on
The mapname and second x and y is the target area of the warp portal.
Example(s):
//Will create a warp portal on the NPC's map at 150,150 leading to prontera, coords 150,180.
warpPortal 150,150,"prontera",150,180;
---------------------------------------
*mapwarp "<from map>","<to map>",<x>,<y>;
This command will collect all characters located on the From map and warp them
wholesale to the same point on the To map, or randomly distribute them there if
the coordinates are zero. "Random" is understood as a special To map name and
will mean randomly shuffling everyone on the same map.
---------------------------------------
\\
5,2.- Guild-related Commands
\\
---------------------------------------
*maprespawnguildid "<map name>",<guild id>,<flag>;
This command goes through the specified map and for each player and monster
found there does stuff.
Flag is a bit-mask (add up numbers to get effects you want)
1 - warp all guild members to their save points.
2 - warp all non-guild members to their save points.
4 - remove all monsters which are not guardian or Emperium.
Flag 7 will, therefore, mean 'wipe all mobs but guardians and the Emperium and
kick all characters out', which is what the official scripts do upon castle
surrender. Upon start of WoE, the scripts do 2 (warp all intruders out).
Characters not belonging to any guild will warp out regardless of the flag setting.
For examples, check the WoE scripts in the distribution.
---------------------------------------
*agitstart;
*agitend;
*agitstart2;
*agitend2;
These four commands will start and end War of Emperium or War of Emperium SE.
This is a bit more complex than it sounds, since the commands themselves won't
actually do anything interesting, except causing all 'OnAgitStart:' and
'OnAgitEnd:', or 'OnAgitStart2:' and 'OnAgitEnd2:' in the case of latter two
commands, events to run everywhere, respectively. They are used as simple
triggers to run a lot of complex scripts all across the server, and they,
in turn, are triggered by clock with an 'OnClock<time>:' time-triggering label.
---------------------------------------
*gvgon "<map name>";
*gvgoff "<map name>";
These commands will turn GVG mode for the specified maps on and off, setting up
appropriate map flags. In GVG mode, maps behave as if during the time of WoE,
even though WoE itself may or may not actually be in effect.
---------------------------------------
*flagemblem <guild id>;
This command only works when run by the NPC objects which have sprite id 722,
which is a 3D guild flag sprite. If it isn't, the data will change, but nothing
will be seen by anyone. If it is invoked in that manner, the emblem of the
specified guild will appear on the flag, though, if any players are watching it
at this moment, they will not see the emblem change until they move out of sight
of the flag and return.
This is commonly used in official guildwar scripts with a function call which
returns a guild id:
// This will change the emblem on the flag to that of the guild that owns
// "guildcastle"
flagemblem GetCastleData("guildcastle",1);
---------------------------------------
*guardian("<map name>",<x>,<y>,"<name to show>",<mob id>,<amount>{,"<event label>"}{,<guardian index>})
This command is roughly equivalent to 'monster', but is meant to be used with
castle guardian monsters and will only work with them. It will set the guardian
characteristics up according to the castle's investment values and otherwise
set the things up that only castle guardians need.
Since trunk r12524:
Returns the id of the mob or 0 if an error occurred.
When 'guardian index' isn't supplied it produces a temporary guardian.
Temporary guardians are not saved with the castle and can't be accessed by guardianinfo.
---------------------------------------
*guardianinfo("<map name>", <guardian number>, <type>)
This function will return various info about the specified guardian, or -1
if it fails for some reason. It is primarily used in the castle manager NPC.
Map name and guardian number (value between 0 and 7) define the target.
Type indicates what information to return:
0 - visibility (whether the guardian is installed or not)
1 - max. hp
2 - current hp
---------------------------------------
//
5,2.- End of guild-related commands
//
---------------------------------------
*npcspeed <speed value>;
*npcwalkto <x>,<y>;
*npcstop;
These commands will make the NPC object in question move around the map. As they
currently are, they are a bit buggy and are not useful for much more than making
an NPC move randomly around the map. (see 'npc/custom/devnpc.txt' for an example
of such usage)
'npcspeed' will set the NPCs walking speed to a specified value. As in the
@speed GM command, 200 is the slowest possible speed while 0 is the fastest
possible (instant motion). 100 is the default character walking speed.
'npcwalkto' will start the NPC sprite moving towards the specified coordinates
on the same map as it is currently on.
'npcstop' will stop the motion.
While in transit, the NPC will be clickable, but invoking it will cause it to
stop motion, which will make it's coordinates different from what the client
computed based on the speed and motion coordinates. The effect is rather
unnerving.
Only a few NPC sprites have walking animations, and those that do, do not get
the animation invoked when moving the NPC, due to the problem in the NPC walking
code, which looks a bit silly. You might have better success by defining a job-
sprite based sprite id in 'db/mob-avail.txt' with this.
---------------------------------------
*movenpc "<NPC name>",<x>,<y>{,<dir>};
This command looks like the NPCWalkToxy function,but is a little different.
While NPCWalkToXY just makes the NPC 'walk' to the coordinates given (which
sometimes gives problems if the path isn't a straight line without objects),
this command just moves the NPC. It basically warps out and in on the current
and given spot. Direction can be used to change the NPC's facing direction.
Example(s):
// This will move Bugga from it's current position to the coordinates 100,20
// (if those coordinates are walkable (legit)).
moveNPC "Bugga",100,20;
---------------------------------------
=====================
|6.- Other commands.|
=====================
---------------------------------------
*debugmes "<message>";
This command will send the message to the server console (map-server window). It
will not be displayed anywhere else.
debugmes strcharinfo(0)+" has just done this that and the other";
// You would see in the map-server window "NAME has just done this that and
// the other"
---------------------------------------
*logmes "<message>";
This command will write the message given to the map server NPC log file, as
specified in 'conf/log_athena.conf'. In the TXT version of the server, the log
file is 'log/npclog.log' by default. In the SQL version, if SQL logging is
enabled, the message will go to the 'npclog' table, otherwise, it will go to the
same log file.
If logs are not enabled, nothing will happen.
---------------------------------------
*globalmes "<message>"{,"<NPC name>"};
This command will send a message to the chat window of all currently connected
characters.
If NPC name is specified, the message will be sent as if the sender would be
the NPC with the said name.
---------------------------------------
*rand(<number>{,<number>});
This function returns a number ...
(if you specify one) ... randomly positioned between 0 and the number you specify -1.
(if you specify two) ... randomly positioned between the two numbers you specify.
rand(10) would result in 0,1,2,3,4,5,6,7,8 or 9
rand(0,9) would result in 0,1,2,3,4,5,6,7,8 or 9
rand(2,5) would result in 2,3,4 or 5
---------------------------------------
*viewpoint <action>,<x>,<y>,<point number>,<color>;
This command will mark places on the mini map in the client connected to the
invoking character. It uses the normal X and Y coordinates from the main map.
The colors of the marks are defined using a hexadecimal number, same as the ones
used to color text in 'mes' output, but are written as hexadecimal numbers in C.
(They look like 0x<six numbers>.)
Action is what you want to do with a point, 1 will set it, while 2 will clear
it. Point number is the number of the point - you can have several. If more than
one point is drawn at the same coordinates, they will cycle, which can be used
to create flashing marks.
// This command will show a mark at coordinates X 30 Y 40, is mark number 1,
// and will be red.
viewpoint 1,30,40,1,0xFF0000;
This will create three points:
viewpoint 1,30,40,1,0xFF0000;
viewpoint 1,35,45,2,0xFF0000;
viewpoint 1,40,50,3,0xFF0000;
And this is how you remove them:
viewpoint 2,30,40,1,0xFF0000;
viewpoint 2,35,45,2,0xFF0000;
viewpoint 2,40,50,3,0xFF0000;
The client determines what it does with the points entirely, the server keeps no
memory of where the points are set whatsoever.
---------------------------------------
*cutin "<filename>",<position>;
This command will display a picture, usually an NPC illustration, also called
cutin, for the currently attached client. The position parameter determines the
placement of the illustration and takes following values:
0 - bottom left corner
1 - bottom middle
2 - bottom right corner
3 - middle of screen in a movable window with an empty title bar
4 - middle of screen without the window header, but still movable
The picture is read from data\texture\유저인터페이스\illust, from both the GRF archive
and data folder, and is required to be a bitmap. The file extension .bmp can be
omitted. Magenta color (#ff00ff) is considered transparent. There is no limit
placed on the size of the illustrations by the client, although loading of large
pictures (about 700x700 and larger) causes the client to freeze shortly (lag).
Typically the size is about 320x480. New illustrations can be added by just
putting the new file into the location above.
The client is able to display only one cutin at the same time and each new one
will cause the old one to disappear. To delete the currently displayed
illustration without displaying a new one, an empty file name and position 255
must be used.
// Displays the Comodo Kafra illustration in lower right corner.
cutin "kafra_07",2;
// Typical way to end a script, which displayed an illustration during a
// dialog with a player.
mes "See you.";
close2;
cutin "",255;
end;
---------------------------------------
*pet <pet id>;
This command is used in all the item scripts for taming items. Running this
command will make the pet catching cursor appear on the client connected to the
invoking character, usable on the monsters with the specified pet ID number. It
will still work outside an item script.
A full list of pet IDs can be found inside 'db/pet_db.txt'
---------------------------------------
*emotion <emotion number>{,<target>}{,"<target name>"};
This command makes an object display an emotion sprite above their own as
if they were doing that emotion. For a full list of emotion numbers,
see 'db/const.txt' under 'e_'. The not so obvious ones are 'e_what' (a question mark)
and 'e_gasp' (the exclamation mark).
The optional target parameter specifies who will get the emotion on top of
their head. If 0 (the default if omitted), the NPC in current use will show
the emotion, if 1, the player that is running the script will display it.
Target name parameter allows to display emotion on top of other NPC/PC without
event labels. If specified name is not found, command does nothing.
---------------------------------------
*misceffect <effect number>;
This command, if run from an NPC object that has a sprite, will call up a
specified effect number, centered on the NPC sprite. If the running code does
not have an object ID (a 'floating' NPC) or is not running from an NPC object at
all (an item script) the effect will be centered on the character who's RID got
attached to the script, if any. For usable item scripts, this command will
create an effect centered on the player using the item.
A full list of known effects is found in 'doc/effect_list.txt'. The list of
those that actually work may differ greatly between client versions.
---------------------------------------
*soundeffect "<effect filename>",<type>
*soundeffectall "<effect filename>",<type>{,"<map name>"}{,<x0>,<y0>,<x1>,<y1>}
These two commands will play a sound effect to either the invoking character
only ('soundeffect') or multiple characters ('soundeffectall'). If the running
code does not have an object ID (a 'floating' NPC) or is not running from an NPC
object at all (an item script) the sound will be centered on the character who's
RID got attached to the script, if any. If it does, it will be centered on that
object. (an NPC sprite)
Effect filename is the filename in a GRF. It must have the .wav extension.
It's not quite certain what the 'type' actually does, it is sent to the client
directly. It probably determines which directory to play the effect from.
It's certain that giving 0 for the number will play sound files from 'data/wav',
but where the other numbers will read from is unclear.
You can add your own effects this way, naturally.
---------------------------------------
*playBGM "<BGM filename>"
*playBGMall "<BGM filename>"{,"<map name>"{,<x0>,<y0>,<x1>,<y1>}}
These two commands will play a Background Music to either the invoking character
only ('playBGM') or multiple characters ('playBGMall').
BGM filename is the filename in /BGM/ folder. It has to be in .mp3 extension.
It's not required to specify the extension inside the script.
If coordinates are omitted, BGM will be broadcasted on the entire map. If the map name
is omitted as well the BGM will be played for the entire server.
You can add your own BGMs this way, naturally.
---------------------------------------
*pvpon "<map name>";
*pvpoff "<map name>";
These commands will turn PVP mode for the specified maps on and off. Beside
setting the flags referred to in 'setmapflag', 'pvpon' will also create a PVP
timer and ranking as will @pvpon GM command do.
---------------------------------------
*atcommand "<command line>";
This command will run the given command line exactly as if it was typed in from
the keyboard by the player connected to the invoking character, and that
character belonged to an account which had GM level 99.
// This will ask the invoker for a character name and then use the '@nuke'
// GM command on them, killing them mercilessly.
input @player$;
atcommand "@nuke "+@player$;
This command has a lot of good uses, I am sure you can have some fun with this
one.
---------------------------------------
*charcommand <command>;
This command will run the given command line exactly as if it was typed in from
the keyboard from a character that belonged to an account which had GM level 99.
The commands can also run without an attached rid.
Example(s):
//this would do the same as above, but now doesn't need a player attached by default.
charCommand "#option 0 0 0 Roy";
---------------------------------------
*unitskilluseid <GID>,<skill id>,<skill lvl>{,<target id>};
*unitskilluseid <GID>,"<skill name>",<skill lvl>{,<target id>};
*unitskillusepos <GID>,<skill id>,<skill lvl>,<x>,<y>;
*unitskillusepos <GID>,"<skill name>",<skill lvl>,<x>,<y>;
This is the replacement of the older commands, these use the same values for
GID as the other unit* commands (See 'GID').
Skill ID is the ID of the skill, skill level is the level of the skill.
For the position, the x and y are given in the unitSkillUsePos.
---------------------------------------
*day;
*night;
These two commands will switch the entire server between day and night mode
respectively. If your server is set to cycle between day and night by
configuration, it will eventually return to that cycle.
-%TAB%script%TAB%DayNight%TAB%-1,{
end;
OnClock0600:
day;
end;
OnInit:
// setting correct mode upon server start-up
if(gettime(3)>=6 && gettime(3)<18)
{
end;
}
OnClock1800:
night;
end;
}
This script allows to emulate the day/night cycle as the server does, but also
allows triggering additional effects upon change, like announces, gifts, etc.
The day/night cycle set by configuration should be disabled, when this script is
used.
---------------------------------------
*defpattern <set number>,"<regular expression pattern>","<event label>";
*activatepset <set number>;
*deactivatepset <set number>;
*deletepset <set number>;
This set of commands is only available if the server is compiled with regular
expressions library enabled. Default compilation and most binary distributions
aren't, which is probably bad, since these, while complex to use, are quite
fascinating.
They will make the NPC object listen for text spoken publicly by players and
match it against regular expression patterns, then trigger labels associated
with these regular expression patterns.
Patterns are organized into sets, which are referred to by a set number. You can
have multiple sets patterns, and multiple patterns may be active at once.
Numbers for pattern sets start at 1.
'defpattern' will associate a given regular expression pattern with an event
label. This event will be triggered whenever something a player says is matched
by this regular expression pattern, if the pattern is currently active.
'activatepset' will make the pattern set specified active. An active pattern
will enable triggering labels defined with 'defpattern', which will not happen
by default.
'deactivatepset' will deactivate a specified pattern set. Giving -1 as a pattern
set number in this case will deactivate all pattern sets defined.
'deletepset' will delete a pattern set from memory, so you can create a new
pattern set in it's place.
Using regular expressions is high wizardry. But with this high wizardry comes
unparalleled power of text manipulation. For an explanation of what a regular
expression pattern is, see a few web pages:
http://www.regular-expressions.info/
http://www.weitz.de/regex-coach/
For an example of this in use, see 'npc\sample\npc_pcre.txt'.
With this you could, for example, automatically punish players for asking for
Zeny in public places, or alternatively, automatically give them Zeny instead if
they want it so much.
---------------------------------------
*pow(<number>,<power>)
Returns the result of the calculation.
Example:
set @i, pow(2,3); // @i will be 8
---------------------------------------
*sqrt(<number>)
Returns square-root of number.
Example:
set @i, sqrt(25); // @i will be 5
---------------------------------------
*distance(<x0>,<y0>,<x1>,<y1>)
Returns distance between 2 points.
Example:
set @i, distance(100,200,101,202);
---------------------------------------
*md5("<string>")
Returns the md5 checksum of a number or string.
Example:
mes md5(12345);
mes md5("12345"); // Will both display 827ccb0eea8a706c4c34a16891f84e7b
mes md5("qwerty"); // Will display d8578edf8458ce06fbc5bb76a58c5ca4
---------------------------------------
*query_sql "your MySQL query", <array variable> {,<array variable>, ...};
*query_logsql "your MySQL query", <array variable> {,<array variable>, ...};
Puts up to 128 rows of values into the arrays and returns the number of rows.
Example:
set @nb, query_sql("select name,fame from `char` ORDER BY fame DESC LIMIT 5", @name$, @fame);
mes "Hall Of Fame: TOP5";
mes "1."+@name$[0]+"("+@fame[0]+")"; // Will return a person with the biggest fame value.
mes "2."+@name$[1]+"("+@fame[1]+")";
mes "3."+@name$[2]+"("+@fame[2]+")";
mes "4."+@name$[3]+"("+@fame[3]+")";
mes "5."+@name$[4]+"("+@fame[4]+")";
Note: In the TXT version it doesn't fill the array and always return -1.
Note: Use $ as suffix in the array to receive all data as text.
Note: The difference between query_sql and query_logsql is that the latter
uses the sql connection to the log database, and should be used when you want
to query the server log tables.
---------------------------------------
*escape_sql("<string>")
Escapes special characters in the string, so that it is safe to use in query_sql(),
and returns the escaped form of the given string.
Example 1:
set .@str$, "John's Laptop";
set .@esc_str$, escape_sql(.@name$); // Escaped string: John\'s Laptop
---------------------------------------
*setiteminfo(<item id>,<type>,<value>)
This function will set some value of an item.
Returns the new value on success, or -1 on fail (item_id not found or invalid type).
Valid types are:
0 - Buy Price; 1 - Sell Price; 2 - Item Type;
3 - maxchance (Max drop chance of this item e.g. 1 = 0.01% , etc..
if = 0, then monsters don't drop it at all (rare or a quest item)
if = 10000, then this item is sold in NPC shops only
4 - sex; 5 - equip; 6 - weight; 7 - atk; 8 - def; 9 - range;
10 - slot; 11 - look; 12 - elv; 13 - wlv; 14 - view id
Example:
setiteminfo 7049,6,999; // Stone now weighs 999
---------------------------------------
*setitemscript(<item id>,<"{ new item script }">{,<type>});
Set a new script bonus to the Item. Very useful for game events.
You can remove an item's itemscript by leaving the itemscript argument empty.
Returns 1 on success, or 0 on fail (item_id not found or new item script is invalid).
Type can optionally be used indicates which script to set (default is 0):
0 - Script
1 - OnEquip_Script
2 - OnUnequip_Script
Example:
setitemscript 2637,"{ if(isequipped(2236)==0)end; if(getskilllv(26)){skill 40,1;}else{skill 26,1+isequipped(2636);} }";
setitemscript 2637,"";
---------------------------------------
*atoi ("<string>")
*axtoi ("<string>")
These commands are used to convert strings to numbers. 'atoi' will interpret
given string as a decimal number (base 10), while 'axtoi' interprets strings as
hexadecimal numbers (base 16).
Example:
mes atoi("11"); // Will display 11 (can also be used to set a @var to 11)
set @var, axtoi("FF"); // Will set the @var to 255
mes axtoi("11"); // Will display 17 (1 = 1, 10 = 16,
// hexadecimal number set: {0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F})
---------------------------------------
*compare (<string>,<substring>)
This command returns 1 or 0 when the substring is in the main string (1) or not (0).
This command is not case sensitive.
Example(s):
//dothis; will be executed ('Bloody Murderer' contains 'Blood').
if (compare("Bloody Murderer","Blood"))
dothis;
//dothat; will not be executed ('Blood butterfly' does not contain 'Bloody').
if (compare("Blood Butterfly","Bloody"))
dothat;
---------------------------------------
*getstrlen("<string>")
This function will return the length of the string given as an argument. It is
useful to check if anything input by the player exceeds name length limits and
other length limits and asking them to try to input something else.
---------------------------------------
*charisalpha("<string>",<position>)
This function will return 1 if the character number Position in the given string
is a letter, 0 if it isn't a letter but a digit or a space.
The first letter is position 0.
---------------------------------------
*charat(<string>,<index>)
Returns char at specified index. If index is out of range,
returns empty string.
Example:
charat("This is a string", 10); //returns "s"
---------------------------------------
*setchar(<string>,<char>,<index>)
Returns the original string with the char at the specified
index set to the specified char. If index out of range, the
original string will be returned.
Only the 1st char in the <char> parameter will be used.
Example:
setchar("Cat", "B", 0); //returns "Bat"
---------------------------------------
*insertchar(<string>,<char>,<index>)
Returns the original string with the specified char inserted
at the specified index. If index is out of range, the char
will be inserted on the end of the string that it is closest.
Only the 1st char in the <char> parameter will be used.
Example:
setchar("laughter", "s", 0); //returns "slaughter"
---------------------------------------
*delchar(<string>,<index>)
Returns the original string with the char at the specified index
removed. If index is out of range, original string will be returned.
Example:
delchar("Diet", 3); //returns "Die"
---------------------------------------
*strtoupper(<string>)
*strtolower(<string>)
Returns the specified string in it's uppercase/lowercase form.
All non-alpha characters will be preserved
Example:
strtoupper("The duck is blue!!"); //returns "THE DUCK IS BLUE!!"
---------------------------------------
*charisupper(<string>,<index>)
*charislower(<string>,<index>)
Returns 1 if character at specified index of specified string is
uppercase/lowercase. Otherwise, 0. Characters not of the alphabelt
will return 0.
Example:
charisupper("eAthena", 1); //returns 1
---------------------------------------
*substr(<string>,<start_index>,<end_index>)
Returns the sub-string of the specified string inclusively between
the set indexes.
If indexes are out of range, or the start index is after the end
index, an empty string will be returned.
Example:
substr("foobar", 3, 5); //returns "bar"
---------------------------------------
*explode(<dest_array>,<string>,<delimiter>)
Breaks a string up into substrings based on the specified delimiter.
Substrings will be stored within the specified string array.
Only the 1st char of the delimiter parameter will be used.
If an empty string is passed as a delimiter, the string will be placed
in the array in it's original form.
Example:
explode(.@my_array$, "Explode:Test:1965:red:PIE", ":");
//.@my_array$ contents will be...
//.@my_array$[0]: "Explode"
//.@my_array$[1]: "Test"
//.@my_array$[2]: "1965"
//.@my_array$[3]: "red"
//.@my_array$[4]: "PIE"
---------------------------------------
*implode(<string_array>{,<glue>})
Combines all substrings within the specified string array into a single string.
If the glue parameter is specified, it will be inserted inbetween each substring.
Example:
setarray .@my_array$[0], "This", "is", "a", "test";
implode(.@my_array$, " "); //returns "This is a test"
---------------------------------------
*sprintf(<format>[,param[,param[,...]]]) [Mirei]
C style sprintf. The resulting string is returned same as in PHP. All C format
specifiers are supported except %n. More info: sprintf @ www.cplusplus.com.
The number of params is only limited by eA's script engine.
See thread: http://www.eathena.ws/board/index.php?showtopic=190410
Example:
.@format$ = 'The %s contains %d monkeys';
dispbottom(sprintf(.@format$, "zoo", 5)); //prints "The zoo contains 5 monkeys"
dispbottom(sprintf(.@format$, "barrel", 82)); //prints "The barrel contains 82 monkeys"
---------------------------------------
*sscanf(<string>,<format>[,param[,param[,...]]]) [Mirei]
C style sscanf. All C format specifiers are supported.
More info: sscanf @ www.cplusplus.com. The number of params is only limited
by eA's script engine.
See thread: http://www.eathena.ws/board/index.php?showtopic=191157
Example:
sscanf("This is a test: 42 foobar", "This is a test: %d %s", .@num, .@str$);
dispbottom(.@num + " " + .@str$); //prints "42 foobar"
---------------------------------------
*strpos(<haystack>,<needle>{,<offset>})
PHP style strpos. Finds a substring (needle) within a string (haystack).
The offset parameter indicates the index of the string to start searching.
Returns index of substring on successful search, else -1.
Comparison is case sensitive.
Example:
strpos("foobar", "bar", 0); //returns 3
strpos("foobarfoo", "foo", 0); //returns 0
strpos("foobarfoo", "foo", 1); //returns 6
---------------------------------------
*replacestr(<input>, <search>, <replace>{, <usecase>{, <count>}})
Replaces all instances of a search string in the input with the specified
replacement string. By default is case sensitive unless <usecase> is set
to 0. If specified it will only replace as many instances as specified
in the count parameter.
Example:
replacestr("testing tester", "test", "dash"); //returns "dashing dasher"
replacestr("Donkey", "don", "mon", 0); //returns "monkey"
replacestr("test test test test test", "yay", 0, 3); //returns "yay yay yay test test"
---------------------------------------
*countstr(<input>, <search>{, <usecase>})
Counts all instances of a search string in the input. By default is case
sensitive unless <usecase> is set to 0.
Example:
countstr("test test test Test", "test"); //returns 3
countstr("cake Cake", "Cake", 0); //returns 2
---------------------------------------
*setfont <font>
This command sets the current RO client interface font to one of the
fonts stored in data\*.eot by using an ID of the font. When the ID
of the currently used font is used, default interface font is used
again.
0 - Default
1 - RixLoveangel
2 - RixSquirrel
3 - NHCgogo
4 - RixDiary
5 - RixMiniHeart
6 - RixFreshman
7 - RixKid
8 - RixMagic
9 - RixJJangu
---------------------------------------
* The Pet AI commands
These commands will only work if the invoking character has a pet, and are meant
to be executed from pet scripts. They will modify the pet AI decision-making for
the current pet of the invoking character, and will NOT have any independent
effect by themselves, which is why only one of them each may be in effect at any
time for a specific pet. A pet may have 'petloot', 'petskillbonus',
'petskillattack' OR 'petpetskillattack2' and 'petskillsupport' OR 'petheal' at
the same time. 'petheal' is deprecated and is no longer used in the default pet
scripts.
*petskillbonus <bonus type>,<value>,<duration>,<delay>;
This command will make the pet give a bonus to the owner's stat (bonus type -
bInt,bVit,bDex,bAgi,bLuk,bStr,bSpeedRate - for a full list, see the values
starting with 'b' in 'db/const.txt')
*petrecovery <status type>,<delay>;
This command will make the pet cure a specified status condition. The curing
actions will occur once every Delay seconds. For a full list of status
conditions that can be cured, see the list of 'SC_' status condition constants
in 'db/const.txt'
*petloot <max items>;
This command will turn on pet looting, with a maximum number of items to loot
specified. Pet will store items and return them when the maximum is reached or
when pet performance is activated.
*petskillsupport <skill id>,<skill level>,<delay>,<percent hp>,<percent sp>;
*petskillsupport "<skill name>",<skill level>,<delay>,<percent hp>,<percent sp>;
*petheal <level>,<delay>,<percent hp>,<percent sp>;
This will make the pet use a specified support skill on the owner whenever the
HP and SP are below the given percent values, with a specified delay time
between activations. The skill numbers are as per 'db/skill_db.txt'.
'petheal' works the same as 'petskillsupport' but has the skill ID hard-coded to
28 (Heal). This command is deprecated.
It's not quite certain who's stats will be used for the skills cast, the
character's or the pets. Probably, Skotlex can answer that question.
*petskillattack <skill id>,<skill level>,<rate>,<bonusrate>;
*petskillattack "<skill name>",<skill level>,<rate>,<bonusrate>;
*petskillattack2 <skill id>,<damage>,<number of attacks>,<rate>,<bonusrate>;
*petskillattack2 "<skill name>",<damage>,<number of attacks>,<rate>,<bonusrate>;
These two commands will make the pet cast an attack skill on the enemy the pet's
owner is currently fighting. Skill IDs and levels are as per 'petskillsupport'.
'petskillattack2' will make the pet cast the skill with a fixed amount of damage
inflicted and the specified number of attacks.
All commands with delays and durations will only make the behavior active for
the specified duration of seconds, with a delay of the specified number of
seconds between activations. Rates are a chance of the effect occurring and are
given in percent. 'bonusrate' is added to the normal rate if the pet intimacy is
at the maximum possible.
The behavior modified with the above mentioned commands will only be exhibited if
the pet is loyal and appropriate configuration options are set in
'battle_athena.conf'.
Pet scripts in the database normally run whenever a pet of that type hatches
from the egg. Other commands usable in item scripts (see 'bonus') will also
happily run from pet scripts. Apparently, the pet-specific commands will also
work in NPC scripts and modify the behavior of the current pet up until the pet
is hatched again. (Which will also occur when the character is logged in again
with the pet still out of the egg.) It is not certain for how long the effect of
such command running from an NPC script will eventually persist, but apparently,
it is possible to usefully employ them in usable item scripts to create pet
buffing items.
Nobody tried this before, so you're essentially on your own here.
---------------------------------------
*bpet;
This command opens up a pet hatching window on the client connected to the
invoking character. It is used in item script for the pet incubators and will
let the player hatch an owned egg. If the character has no eggs, it will just
open up an empty incubator window.
This is still usable outside item scripts.
---------------------------------------
*makepet <pet id>;
This command will create a pet egg and put it in the invoking character's
inventory. The kind of pet is specified by pet ID numbers listed in
'db/pet_db.txt'. The egg is created exactly as if the character just successfully
caught a pet in the normal way.
// This will make you a poring:
makepet 1002;
Notice that you absolutely have to create pet eggs with this command. If you try
to give a pet egg with 'getitem', pet data will not be created by the char
server and the egg will disappear when anyone tries to hatch it.
---------------------------------------
*homshuffle;
This will recalculate the homunculus stats according to its level, of the
current invoking character.
---------------------------------------
*setcell "<map name>",<x1>,<y1>,<x2>,<y2>,<type>,<flag>;
Each map cell has several 'flags' that specify the properties of that cell.
These include terrain properties (walkability, shootability, presence of water),
skills (basilica, land protector, ...) and other (NPC nearby, no vending, ...).
Each of these can be 'on' or 'off'. Together they define a cell's behavior.
This command lets you alter these flags for all map cells in the specified
(x1,y1)-(x2,y2) rectangle. The 'flag' can be 0 or 1 (0:clear flag, 1:set flag).
The 'type' defines which flag to modify. Possible options include cell_walkable,
cell_shootable, cell_basilica. For a full list, see const.txt.
Example:
setcell "arena",0,0,300,300,cell_basilica,1;
setcell "arena",140,140,160,160,cell_basilica,0;
setcell "arena",135,135,165,165,cell_walkable,0;
setcell "arena",140,140,160,160,cell_walkable,1;
This will add a makeshift ring into the center of the map. The ring will be
surrounded by a 5-cell wide 'gap' to prevent interference from outside, and
the rest of the map will be marked as 'basilica', preventing observers from
casting any offensive skills or fighting among themselves. Note that the wall
will not be shown nor known client-side, which may cause movement problems.
Another example:
OnBarricadeDeploy:
setcell "schg_cas05",114,51,125,51,cell_walkable,0;
end;
OnBarricadeBreak:
setcell "schg_cas05",114,51,125,51,cell_walkable,1;
end;
This could be a part of the WoE:SE script, where attackers are not allowed
to proceed until all barricades are destroyed. This script would place and
remove a nonwalkable row of cells after the barricade mobs.
---------------------------------------
*checkcell ("<map name>",<x>,<y>,<type>);
This command will return 1 or 0, depending on whether the specified cell has
the 'type' flag set or not. There are various types to check, all mimicking
the server's cell_chk enumeration. The types can be found in db/const.txt.
The meaning of the individual types can be confusing, so here's an overview:
- cell_chkwall/water/cliff
these check directly for the 'terrain component' of the specified cell
- cell_chkpass/reach/nopass/noreach
passable = not wall & not cliff, reachable = passable wrt. no-stacking mod
- cell_chknpc/basilica/landprotector/novending/nochat
these check for specific dynamic flags (their name indicates what they do)
Example:
mes "Pick a destination map.";
input .@map$;
mes "Alright, now give me the coordinates.";
input .@x;
input .@y;
if( !checkcell(.@map$,.@x,.@y,cell_chkpass) )
{
mes "Can't warp you there, sorry!";
close;
}
else
{
mes "Ok, get ready...";
close2;
warp .@map$, .@x, .@y;
end;
}
---------------------------------------
*setwall "<map name>",<x>,<y>,<size>,<dir>,<shootable>,"<name>";
*delwall "<name>";
Creates an invisible wall, an array of "setcell" starting from x,y and doing a
line of the given size in the given direction. The difference with setcell is
this one update client part too to avoid the glitch problem. Directions are the
same as NPC sprite facing directions: 0=north, 1=northwest, 2=west, etc.
---------------------------------------
*readbook <book id>,<page>;
This will open a book item at the specified page
---------------------------------------
========================
|7.- Instance commands.|
========================
---------------------------------------
*instance_create("<instance name>",<party id>);
Create an instance using the name "<instance name>" for the Party of <party id>.
Most instance_* commands are used in conjunction with this command and depend
on the ID this command returns.
Example:
// Store the Party ID of the invoking character.
set .@party_id, getcharid(1);
// Attempt to create an instance using that party ID.
set .@id, instance_create("Endless Tower", .@party_id);
if (.@id == -1) { // Party ID is in use by another instance.
...
}
else (.@id < 0) { // Unspecified error while queuing instance.
...
}
---------------------------------------
*instance_destroy {<instance id>};
Destroys instance with the ID <instance id>. If no ID is specified, the instance,
the script is attached to, is used. If the script is not attached to an instance,
the instance of the currently attached player's party is used. If no player is
currently attached, the command fails and causes the script to halt.
---------------------------------------
*instance_attachmap("<map name>",<instance id>{,<use base name>});
Attaches the map "<map name>" to the instance specified with <instance id>. The
optional parameter specifies, whether a map requires emulation for instancing (1)
or not (0 = default).
Returns the resulting map name on success or an empty string on failure.
---------------------------------------
*instance_detachmap "<map name>"{,<instance id>};
Detach the map "<map name>" to the instance with the <instance id>. If no ID is
specified, the instance, the script is attached to, is used. If the script is not
attached to an instance, the instance of the currently attached player's party is
used. If no player is currently attached, the command fails and causes the script
to halt.
---------------------------------------
*instance_init <instance id>;
Initializes the instance given by <instance id>. This copies all NPCs from the
source maps to the instanced maps.
---------------------------------------
*instance_announce <instance id>,"<text>",<flag>{,<fontColor>{,<fontType>{,<fontSize>{,<fontAlign>{,<fontY>}}}}};
Works like announce, but has the <instance id> parameter. If instance id is 0, the
instance, the script is attached to, is used. If the script is not attached to an
instance, the instance of the currently attached player's party is used. If no
player is currently attached, the command fails and causes the script to halt.
---------------------------------------
*instance_attach <instance id>;
Attaches the current script to the instance given by <instance id>.
---------------------------------------
*instance_npcname("<npc name>"{,<instance id>});
Retrieves the unique name given to a copy of an NPC given by "<npc name>" in an
instance specified <instance id>. If no ID is specified, the instance, the script
is attached to, is used. If the script is not attached to an instance, the
instance of the currently attached player's party is used. If no player is
currently attached, the command fails and causes the script to halt.
---------------------------------------
*has_instance("<map name>"{,<instance id>});
Checks whether or not the given map belongs to specified instance. If no ID is
specified, the instance, the script is attached to, is used. If the script is not
attached to an instance, the instance of the currently attached player's party
is used. If no player is currently attached, the command fails and causes the
script to halt.
Returns the name of the instanced map on success, otherwise an empty string.
---------------------------------------
*instance_id({<type>});
Retrieves the instance id, depending on <type>. If type is not given, it defaults
to 0.
Type:
0 - Instance ID the script is attached to.
1 - Instance ID of the currently attached player's party.
---------------------------------------
*instance_warpall "<map name>",<x>,<y>{,<instance id>};
Warps all players in the instance <instance id> to <map name> at given
coordinates. If no ID is specified, the instance, the script is attached to,
is used. If the script is not attached to an instance, the instance of the
currently attached player's party is used. If no player is currently attached,
the command fails and causes the script to halt.
---------------------------------------
*instance_set_timeout <alive timeout>,<idle timeout>{,<instance id>};
Sets the timeout values for an instance given by <instance id>. If no ID is
specified, the instance, the script is attached to, is used. If the script is
not attached to an instance, the instance of the currently attached player's
party is used. If no player is currently attached, the command fails and causes
the script to halt.
Parameter <alive timeout> specifies the total amount of time the instance will
exist. Parameter <idle timeout> specifies how long players have, when they are
outside of the instance, until it is destroyed.
Both timeout values are in seconds.
---------------------------------------
=========================
|8.- Quest Log commands.|
=========================
---------------------------------------
*setquest <ID>;
Place quest of <ID> in the users quest log, the state of which is "active".
---------------------------------------
*completequest <ID>;
Change the state for the given quest <ID> to "complete" and remove from the users quest log.
---------------------------------------
*erasequest <ID>;
Remove the quest of the given <ID> from the user's quest log.
---------------------------------------
*changequest <ID>,<ID2>;
Remove quest of the given <ID> from the user's quest log.
Add quest of the <ID2> to the the quest log, and the state is "active".
---------------------------------------
*checkquest(<ID>{,PLAYTIME|HUNTING})
If no additional argument supplied, return the state of the quest:
-1 = Quest not started (not in quest log)
0 = Quest has been given, but the state is "inactive"
1 = Quest has been given, and the state is "active"
2 = Quest completed
If parameter "PLAYTIME" is supplied:
-1 = Quest not started (not in quest log)
0 = the time limit has not yet been reached
1 = the time limit has not been reached but the quest is marked as complete
2 = the time limit has been reached
If parameter "HUNTING" is supplied:
-1 = Quest not started (not in quest log)
0 = you haven't killed all of the target monsters and the time limit has not been reached.
1 = you haven't killed all of the target monsters but the time limit has been reached.
2 = you've killed all of the target monsters
---------------------------------------
*showevent <state>, <color>;
Show a colored mark in the mini-map like "viewpoint" and an emotion on top of a NPC.
This is used to indicate that a NPC has a quest or an event to certain player/s.
state can be:
0 = disable ( Used to disable and remove the mark and the emotion from the NPC. )
1 = exclamation emotion ( Used to show an important quest event to certain player. )
2 = interrogation emotion ( Used to show an non-important quest event to certain player. )
Other value may cause client crashes.
color can be:
0 = yellow
1 = orange
2 = green
3 = blue
other values show a transparent mark in the mini-map.
----------------------------------------
============================
|9.- Battleground commands.|
============================
---------------------------------------
*waitingroom2bg_single(<battle group>,"<mapname>",<x>,<y>,"<npc name>");
Adds the first waiting player from the chat room of given NPC to an
existing battleground group and warps it to specified coordinates on
given map.
---------------------------------------
*waitingroom2bg("<mapname>",<x>,<y>,"<On Quit Event>","<On Death Event>"{,"<npc name>"});
<Mapname> and X Y coordinates refer to where the "respawn" base is, where the player group will respawn when they die.
<On Quit Event> refers to an NPC label that attaches to the character and is run when they relog.
<On Death Event> refers to an NPC label that attaches to the character and is run when they die. Can be "" for empty.
Unlike the prior command, the latter will attach a GROUP in a waiting room to the battleground, and
sets the array $@arenamembers[0] where 0 holds the IDs of the first group, and 1 holds the IDs of the second.
If the option parameter is left out, the waiting room of the current NPC is used.
Example:
// Battle Group will be referred to as $@KvM01BG_id1, and when they die, respawn at bat_c01,52,129.
set $@KvM01BG_id1, waitingroom2bg("bat_c01",52,129,"KvM01_BG::OnGuillaumeQuit","KvM01_BG::OnGuillaumeDie");
end;
----------------------------------------
*bg_team_setxy <Battle Group ID>,<x>,<y>;
Update the respawn point of the given battle group to x, y on the same map. The <Battle Group ID> can be retrieved using getcharid(4)
Example:
bg_team_setxy getcharid(4),56,212;
mapannounce "bat_a01", "Group [1] has taken the work shop, and will now respawn there.",bc_map,"0xFFCE00";
end;
----------------------------------------
*bg_warp <Battle Group>,"<Mapname>",<x>,<y>;
Similar to warp command.
Place all members of <Battle Group> at <mapname> at x y.
Example:
//place the battle group one for Tierra Gorge at starting position.
bg_warp $@TierraBG1_id1,"bat_a01",352,342;
end;
----------------------------------------
*bg_monster <Battle Group>,"<map name>",<x>,<y>,"<name to show>",<mob id>,"<event label>";
*bg_monster(<Battle Group>,"<map name>",<x>,<y>,"<name to show>",<mob id>,"<event label>");
Similar to monster script command.
Spawn a monster with allegiance to the given battle group.
Does not allow for the summoning of multiple monsters.
Monsters are similar to that in War of Emperium, in that the specified Battle group is considered friendly.
Example:
// It can be used in two different ways.
bg_monster $@TierraBG1_id2,"bat_a01",167,50,"Food Depot",1910,"Feed Depot#1::OnMyMobDead";
end;
// Alternatively, you can set an ID for the monster using "set".
// This becomes useful when used with the command below.
set $@Guardian_3, bg_monster($@TierraBG1_id2,"bat_a01",268,204,"Guardian",1949,"NPCNAME::OnMyMobDead");
end;
----------------------------------------
*bg_monster_set_team <GID>,<Battle Group>;
This command will change the allegiance if a monster in a battle ground.
GID can be set when spawning the monster via the bg_monster command.
Example:
end;
OnEnable:
mapannounce "A guardian has been summoned for Battle Group 2!",bc_map,"0xFFCE00";
set $@Guardian, bg_monster($@BG_2,"bat_a01",268,204,"Guardian",1949,"NPCNAME::OnMyMobDead");
initnpctimer;
end;
OnTimer1000:
stopnpctimer;
mapannounce "Erm, sorry about that! This monster was meant for Battle Group 1.",bc_map,"0xFFCE00";
bg_monster_set_team $@Guardian, $@BG_1;
end;
----------------------------------------
*bg_leave;
Removes attached player from their Battle Group.
----------------------------------------
*bg_destroy <Batte Group>;
As the name says, destroys the battle group created for that battle ground.
----------------------------------------
*areapercentheal "<mapname>",<x1>,<y1>,<x2>,<y2>,<hp>,<sp>;
Not exactly limited to battleground use, this will restore HP/SP in a defined area at a percentage.
Example:
areapercentheal "bat_a01",52,208,61,217,100,100;
end;
----------------------------------------
*bg_get_data(<Battle Group>,<type>);
Retrieves data related to given battle group. Type can be one of the following:
0 - Amount of players currently belonging to the group.
----------------------------------------
*bg_getareausers(<battle group>,<map name>,<x0>,<y0>,<x1>,<y1>);
Retrieves amount of players belonging to given battle group on given
map within an specified rectangular area.
----------------------------------------
*bg_updatescore "<mapname>",<Guillaume Score>,<Croix Score>;
Only usable when the map is defined as type:
mapflag <mapname> battleground 2
This command will force the update of the displayed scoreboard.
----------------------------------------
==========================
|10.- Mercenary commands.|
==========================
---------------------------------------
*mercenary_create <class>,<contract time>;
This command summons a mercenary of given class, for given amount of
time in milliseconds. Typically used in item scripts of mercenary
scrolls.
----------------------------------------
*mercenary_heal <hp>,<sp>;
This command works like 'heal', but affects the mercenary of the
currently attached character.
----------------------------------------
*mercenary_sc_start <type>,<tick>,<val1>;
This command works like 'sc_start', but affects the mercenary of the
currently attached character.
----------------------------------------
*mercenary_get_calls(<guild>);
*mercenary_set_calls <guild>,<value>;
Sets or gets the mercenary calls value for given guild for currently
attached character. Guild can be one or the following constants:
ARCH_MERC_GUILD
SPEAR_MERC_GUILD
SWORD_MERC_GUILD
----------------------------------------
*mercenary_get_faith(<guild>);
*mercenary_set_faith <guild>,<value>;
Sets or gets the mercenary faith value for given guild for currently
attached character. Guild can be one or the following constants:
ARCH_MERC_GUILD
SPEAR_MERC_GUILD
SWORD_MERC_GUILD
---------------------------------------
*getmercinfo(<type>{,<char id>});
Retrieves information about mercenary of the currently attached
character. If char id is given, the information of that character is
retrieved instead. Type specifies what information to retrieve and
can be one of the following:
0 - Database ID
1 - Class
2 - Name
3 - Faith value for this mercenary's guild, if any
4 - Calls value for this mercenary's guild, if any
5 - Kill count
6 - Remaining life time in msec
7 - Level
If the character does not have a mercenary, the command returns ""
for name and 0 for all other types.
----------------------------------------
Whew.
That's about all of them.
