Merged INSTALL with README.md and README.cmake

4 files changed, 50 insertions, 86 deletions

diff --git a/INSTALL b/INSTALL
deleted file mode 100644
index 148be1a9..00000000
--- a/INSTALL
+++ /dev/null
@@ -1,73 +0,0 @@
-How to compile and run Mana on your GNU/Linux Box
-=================================================
-
-Homepage:  https://manasource.org/
-IRC:       irc.libera.chat / #mana
-
-1) Requirements
-2) Compiling And Installing Mana
-3) Notes
-
-
-1. Requirements
-===============
-
-You are expected to have either checked out Mana from Git or you have downloaded
-a source release. To get Mana to compile, you need a compiler (GCC)
-and some libraries. The required libraries are:
-
-* SDL2              https://www.libsdl.org/
-* SDL2_mixer        https://github.com/libsdl-org/SDL_mixer
-* SDL2_image        https://github.com/libsdl-org/SDL_image
-* SDL2_net          https://github.com/libsdl-org/SDL_net
-* SDL2_ttf          https://github.com/libsdl-org/SDL_ttf
-* ENet 1.3          http://sauerbraten.org/enet/ (included in repository)
-* Guichan 0.8.x     https://github.com/darkbitsorg/guichan
-* libxml2           https://gitlab.gnome.org/GNOME/libxml2/-/wikis/home
-* physfs 2.x        https://icculus.org/physfs/
-* zlib 1.2.x        https://zlib.net/
-* libcurl           https://curl.se/libcurl/
-
-If you've cloned the Git repository, you will also need these tools to compile:
-
-* CMake >= 3.8      https://cmake.org/
-* GNU gettext       https://www.gnu.org/software/gettext/
-
-On some machines, it's been reported that this package is also needed. However,
-you might not need it:
-
-* GNU libtool       https://www.gnu.org/software/libtool/
-
-Installing these dependencies is distributions-specific, and we'll leave it to
-you to figure this out.
-
-
-2. Compiling And Installing Mana
-================================
-
-1) Go to the directory you have extracted the source to.
-2) Run "cmake ."
-3) Run "make"
-4) Run "make install" as root
-
-It should have installed Mana on your system now, and you can run it
-with "mana". By default all files are installed to /usr/local, you can pass a
-different prefix to cmake with -D CMAKE_INSTALL_PREFIX=/path/to/prefix
-
-
-  NOTE: It is possible to compile Mana without support for OpenGL rendering.
-  To do this perform step 2 as follows:
-
-    cmake -DWITH_OPENGL=OFF .
-
-  Rebuild the executable from scratch using "make clean" and then "make".
-
-For additional CMake related hints please read README.cmake
-
-3. Notes
-========
-
-If you have any problems, you are welcome to post your questions on our forums,
-or talk about them in our IRC channel.
-
-- Mana Dev Team
diff --git a/README.cmake b/README.cmake
index 8471473f..6a683292 100644
--- a/README.cmake
+++ b/README.cmake
@@ -27,13 +27,19 @@ The syntax for setting variables to control CMakes behaviour is
 
 - Use a custom install prefix (like --prefix on autoconf)?
   CMAKE_INSTALL_PREFIX=/path/to/prefix
+
 - Create a debug build?
   CMAKE_BUILD_TYPE=Debug .
+
 - Add additional package search directories?
   CMAKE_PREFIX_PATH=/prefix/path
+
 - Add additional include search directories?
   CMAKE_INCLUDE_PATH=/include/path
 
+- Compile without legacy OpenGL rendering?
+  WITH_OPENGL=OFF
+
 For example, to build mana to install in /opt/mana, with libraries in
 /build/mana/lib, and SDL-headers in /build/mana/include/SDL you'd use
 the following command:
@@ -86,6 +92,9 @@ $ cmake -DCMAKE_TOOLCHAIN_FILE=/build/toolchain.cmake .
 4. Creating an installer binary for Windows
 -------------------------------------------
 
+(NOTE: These instructions are outdated, an NSIS installer can now be produced
+in MSYS2 using cpack, which automates most of the below steps.)
+
 Call cmake with the following flags:
 
  - CMAKE_TOOLCHAIN_FILE=/build/toolchain.cmake
diff --git a/README.md b/README.md
index bac963af..eb591947 100644
--- a/README.md
+++ b/README.md
@@ -1,19 +1,24 @@
-THE MANA CLIENT
+The Mana Client
 ===============
 
 With the Mana client you can play The Mana World and related games. The Mana
 World is a free 2D open source MMORPG. This client supports games hosted by
 either tmwAthena or manaserv.
 
-The Mana client is written in C++ and builds upon:
-
-- SDL2, SDL2\_image, SDL2\_mixer, SDL2\_ttf, SDL2\_net (Media framework)
-- Guichan (GUI framework)
-- libxml2 (XML parsing and writing)
-- PhysicsFS (Data files)
-- ENet (UDP networking library)
+The Mana client is written in C++17 and builds upon:
+
+- [SDL2](https://www.libsdl.org/),
+  [SDL2\_image](https://github.com/libsdl-org/SDL_image),
+  [SDL2\_mixer](https://github.com/libsdl-org/SDL_mixer),
+  [SDL2\_ttf](https://github.com/libsdl-org/SDL_ttf),
+  [SDL2\_net](https://github.com/libsdl-org/SDL_net) (media and networking)
+- [Guichan 0.8](https://github.com/darkbitsorg/guichan) (GUI framework)
+- [libxml2](https://gitlab.gnome.org/GNOME/libxml2/-/wikis/home) (XML parsing and writing)
+- [PhysicsFS 3](https://icculus.org/physfs/) (data files)
+- [ENet 1.3](http://sauerbraten.org/enet/) (UDP networking library)
+- [GNU gettext](https://www.gnu.org/software/gettext/) (translations)
 - libcurl (HTTP downloads)
-- zlib (Archives)
+- [zlib 1.2](https://zlib.net/) (compression)
 
 See the `AUTHORS` file for the list of developers.
 
@@ -109,6 +114,9 @@ to contact the developers of the game instead.
 Compiling the Client
 --------------------
 
+Apart from the dependencies listed above you will need a compiler and
+[CMake](https://cmake.org/) installed.
+
 Installing the dependencies on Ubuntu:
 
     sudo apt install build-essential cmake \
@@ -145,8 +153,28 @@ Once the dependencies are installed, use CMake:
     cmake -B build .
     cmake --build build
 
-This produces an executable in `build/src/mana`. If running it without
-installing, be sure to run it from the repository root so that it can find its
-data files.
+This produces an executable in `build/src/mana`. Be sure to run it from the
+repository root so that it can find its data files.
+
+Installing the Client
+---------------------
+
+On Linux you can run `cmake --install build`. By default all files are
+installed to `/usr/local`, but you can pass a different prefix to the first
+`cmake` invocation with `-DCMAKE_INSTALL_PREFIX=/path/to/prefix`.
+
+On Windows, you can install the same way as above to put the Mana client in
+your Program Files. However, you'll probably want to create an installer
+instead. For MSYS2 UCRT64 builds, an NSIS installer can be produced as follows:
+
+    cd build
+    cpack
+
+On macOS, you can create a stand-alone application bundle by installing,
+similar to the Linux command above. To make it easy for others to install your
+build, you can also build a DragNDrop DMG using:
+
+    cd build
+    cpack -G DragNDrop
 
 See `README.cmake` for additional information.
diff --git a/data/help/header.txt b/data/help/header.txt
index 6391be8f..cdf2d6dd 100644
--- a/data/help/header.txt
+++ b/data/help/header.txt
@@ -2,7 +2,7 @@
 ##1                      M  A  N  A      C L I E N T
 ##1               =========================================
 
-             ##2Version:##0 0.6.1          ##2Date:##0 2 April 2012
+             ##2Version:##0 0.7.0          ##2Date:##0 .. August 2024
 
 ##2                    Website:##0 https://manasource.org