diff options
Diffstat (limited to 'misc/src/ladmin/ladmin.c')
| -rw-r--r-- | misc/src/ladmin/ladmin.c | 4385 |
1 files changed, 4385 insertions, 0 deletions
diff --git a/misc/src/ladmin/ladmin.c b/misc/src/ladmin/ladmin.c new file mode 100644 index 0000000..497f3bd --- /dev/null +++ b/misc/src/ladmin/ladmin.c @@ -0,0 +1,4385 @@ +// $Id: ladmin.c,v 1.1.1.1 2004/09/10 17:26:52 MagicalTux Exp $ +/////////////////////////////////////////////////////////////////////////// +// EAthena login-server remote administration tool +// Ladamin in C by [Yor] +// if you modify this software, modify ladmin in tool too. +/////////////////////////////////////////////////////////////////////////// + +#include <sys/types.h> +#include <sys/socket.h> +#include <stdio.h> +#include <stdlib.h> +#include <netinet/in.h> +#include <sys/time.h> // gettimeofday +#include <time.h> +#include <sys/ioctl.h> +#include <unistd.h> // close +#include <signal.h> +#include <fcntl.h> +#include <string.h> // str* +#include <arpa/inet.h> // inet_addr +#include <netdb.h> // gethostbyname +#include <stdarg.h> // valist +#include <ctype.h> // tolower + +#include "core.h" +#include "socket.h" +#include "ladmin.h" +#include "version.h" +#include "mmo.h" + +#ifdef PASSWORDENC +#include "md5calc.h" +#endif + +#ifdef MEMWATCH +#include "memwatch.h" +#endif + +//-------------------------------INSTRUCTIONS------------------------------ +// Set the variables below: +// IP of the login server. +// Port where the login-server listens incoming packets. +// Password of administration (same of config_athena.conf). +// Displayed language of the sofware (if not correct, english is used). +// IMPORTANT: +// Be sure that you authorize remote administration in login-server +// (see login_athena.conf, 'admin_state' parameter) +//------------------------------------------------------------------------- +char loginserverip[16] = "127.0.0.1"; // IP of login-server +int loginserverport = 6900; // Port of login-server +char loginserveradminpassword[24] = "admin"; // Administration password +#ifdef PASSWORDENC +int passenc = 2; // Encoding type of the password +#else +int passenc = 0; // Encoding type of the password +#endif +char defaultlanguage = 'E'; // Default language (F: Français/E: English) + // (if it's not 'F', default is English) +char ladmin_log_filename[1024] = "log/ladmin.log"; +char date_format[32] = "%Y-%m-%d %H:%M:%S"; +//------------------------------------------------------------------------- +// LIST of COMMANDs that you can type at the prompt: +// To use these commands you can only type only the first letters. +// You must type a minimum of letters (you can not type 'a', +// because ladmin doesn't know if it's for 'aide' or for 'add') +// <Example> q <= quit, li <= list, pass <= passwd, etc. +// +// Note: every time you must give a account_name, you can use "" or '' (spaces can be included) +// +// aide/help/? +// Display the description of the commands +// aide/help/? [command] +// Display the description of the specified command +// +// add <account_name> <sex> <password> +// Create an account with the default email (a@a.com). +// Concerning the sex, only the first letter is used (F or M). +// The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail. +// When the password is omitted, the input is done without displaying of the pressed keys. +// <example> add testname Male testpass +// +// ban/banish yyyy/mm/dd hh:mm:ss <account name> +// Changes the final date of a banishment of an account. +// Like banset, but <account name> is at end. +// +// banadd <account_name> <modifier> +// Adds or substracts time from the final date of a banishment of an account. +// Modifier is done as follows: +// Adjustment value (-1, 1, +1, etc...) +// Modified element: +// a or y: year +// m: month +// j or d: day +// h: hour +// mn: minute +// s: second +// <example> banadd testname +1m-2mn1s-6y +// this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time. +// NOTE: If you modify the final date of a non-banished account, +// you fix the final date to (actual time +- adjustments) +// +// banset <account_name> yyyy/mm/dd [hh:mm:ss] +// Changes the final date of a banishment of an account. +// Default time [hh:mm:ss]: 23:59:59. +// banset <account_name> 0 +// Set a non-banished account (0 = unbanished). +// +// block <account name> +// Set state 5 (You have been blocked by the GM Team) to an account. +// Like state <account name> 5. +// +// check <account_name> <password> +// Check the validity of a password for an account +// NOTE: Server will never sends back a password. +// It's the only method you have to know if a password is correct. +// The other method is to have a ('physical') access to the accounts file. +// +// create <account_name> <sex> <email> <password> +// Like the 'add' command, but with e-mail moreover. +// <example> create testname Male my@mail.com testpass +// +// del <account name> +// Remove an account. +// This order requires confirmation. After confirmation, the account is deleted. +// +// email <account_name> <email> +// Modify the e-mail of an account. +// +// getcount +// Give the number of players online on all char-servers. +// +// gm <account_name> [GM_level] +// Modify the GM level of an account. +// Default value remove GM level (GM level = 0). +// <example> gm testname 80 +// +// id <account name> +// Give the id of an account. +// +// info <account_id> +// Display complete information of an account. +// +// kami <message> +// Sends a broadcast message on all map-server (in yellow). +// kamib <message> +// Sends a broadcast message on all map-server (in blue). +// +// language <language> +// Change the language of displaying. +// +// list/ls [start_id [end_id]] +// Display a list of accounts. +// 'start_id', 'end_id': indicate end and start identifiers. +// Research by name is not possible with this command. +// <example> list 10 9999999 +// +// listBan/lsBan [start_id [end_id]] +// Like list/ls, but only for accounts with state or banished +// +// listGM/lsGM [start_id [end_id]] +// Like list/ls, but only for GM accounts +// +// listOK/lsOK [start_id [end_id]] +// Like list/ls, but only for accounts without state and not banished +// +// memo <account_name> <memo> +// Modify the memo of an account. +// 'memo': it can have until 253 characters (with spaces or not). +// +// name <account_id> +// Give the name of an account. +// +// passwd <account_name> <new_password> +// Change the password of an account. +// When new password is omitted, the input is done without displaying of the pressed keys. +// +// quit/end/exit +// End of the program of administration +// +// reloadGM +// Reload GM configuration file +// +// search <expression> +// Seek accounts. +// Displays the accounts whose names correspond. +// search -r/-e/--expr/--regex <expression> +// Seek accounts by regular expression. +// Displays the accounts whose names correspond. +// +// sex <account_name> <sex> +// Modify the sex of an account. +// <example> sex testname Male +// +// state <account_name> <new_state> <error_message_#7> +// Change the state of an account. +// 'new_state': state is the state of the packet 0x006a + 1. The possibilities are: +// 0 = Account ok 6 = Your Game's EXE file is not the latest version +// 1 = Unregistered ID 7 = You are Prohibited to log in until %s +// 2 = Incorrect Password 8 = Server is jammed due to over populated +// 3 = This ID is expired 9 = No MSG +// 4 = Rejected from Server 100 = This ID has been totally erased +// 5 = You have been blocked by the GM Team +// all other values are 'No MSG', then use state 9 please. +// 'error_message_#7': message of the code error 6 = Your are Prohibited to log in until %s (packet 0x006a) +// +// timeadd <account_name> <modifier> +// Adds or substracts time from the validity limit of an account. +// Modifier is done as follows: +// Adjustment value (-1, 1, +1, etc...) +// Modified element: +// a or y: year +// m: month +// j or d: day +// h: hour +// mn: minute +// s: second +// <example> timeadd testname +1m-2mn1s-6y +// this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time. +// NOTE: You can not modify a unlimited validity limit. +// If you want modify it, you want probably create a limited validity limit. +// So, at first, you must set the validity limit to a date/time. +// +// timeset <account_name> yyyy/mm/dd [hh:mm:ss] +// Changes the validity limit of an account. +// Default time [hh:mm:ss]: 23:59:59. +// timeset <account_name> 0 +// Gives an unlimited validity limit (0 = unlimited). +// +// unban/unbanish <account name> +// Unban an account. +// Like banset <account name> 0. +// +// unblock <account name> +// Set state 0 (Account ok) to an account. +// Like state <account name> 0. +// +// version +// Display the version of the login-server. +// +// who <account name> +// Displays complete information of an account. +// +//------------------------------------------------------------------------- +int login_fd; +int login_ip; +int bytes_to_read = 0; // flag to know if we waiting bytes from login-server +char command[1024]; +char parameters[1024]; +int list_first, list_last, list_type, list_count; // parameter to display a list of accounts +int already_exit_function = 0; // sometimes, the exit function is called twice... so, don't log twice the message + +//------------------------------ +// Writing function of logs file +//------------------------------ +int ladmin_log(char *fmt, ...) { + FILE *logfp; + va_list ap; + struct timeval tv; + char tmpstr[2048]; + + va_start(ap, fmt); + + logfp = fopen(ladmin_log_filename, "a"); + if (logfp) { + if (fmt[0] == '\0') // jump a line if no message + fprintf(logfp, RETCODE); + else { + gettimeofday(&tv, NULL); + strftime(tmpstr, 24, date_format, localtime(&(tv.tv_sec))); + sprintf(tmpstr + strlen(tmpstr), ".%03d: %s", (int)tv.tv_usec / 1000, fmt); + vfprintf(logfp, tmpstr, ap); + } + fclose(logfp); + } + + va_end(ap); + return 0; +} + +//----------------------------------------------------- +// Function to suppress control characters in a string. +//----------------------------------------------------- +int remove_control_chars(unsigned char *str) { + int i; + int change = 0; + + for(i = 0; str[i]; i++) { + if (str[i] < 32) { + str[i] = '_'; + change = 1; + } + } + + return change; +} + +//--------------------------------------------- +// Function to return ordonal text of a number. +//--------------------------------------------- +char* makeordinal(int number) { + if (defaultlanguage == 'F') { + if (number == 0) + return ""; + else if (number == 1) + return "er"; + else + return "ème"; + } else { + if ((number % 10) < 4 && (number % 10) != 0 && (number < 10 || number > 20)) { + if ((number % 10) == 1) + return "st"; + else if ((number % 10) == 2) + return "nd"; + else + return "rd"; + } else { + return "th"; + } + } + return ""; +} + +//----------------------------------------------------------------------------------------- +// Function to test of the validity of an account name (return 0 if incorrect, and 1 if ok) +//----------------------------------------------------------------------------------------- +int verify_accountname(char* account_name) { + int i; + + for(i = 0; account_name[i]; i++) { + if (account_name[i] < 32) { + if (defaultlanguage == 'F') { + printf("Caractère interdit trouvé dans le nom du compte (%d%s caractère).\n", i+1, makeordinal(i+1)); + ladmin_log("Caractère interdit trouvé dans le nom du compte (%d%s caractère)." RETCODE, i+1, makeordinal(i+1)); + } else { + printf("Illegal character found in the account name (%d%s character).\n", i+1, makeordinal(i+1)); + ladmin_log("Illegal character found in the account name (%d%s character)." RETCODE, i+1, makeordinal(i+1)); + } + return 0; + } + } + + if (strlen(account_name) < 4) { + if (defaultlanguage == 'F') { + printf("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n"); + ladmin_log("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères." RETCODE); + } else { + printf("Account name is too short. Please input an account name of 4-23 bytes.\n"); + ladmin_log("Account name is too short. Please input an account name of 4-23 bytes." RETCODE); + } + return 0; + } + + if (strlen(account_name) > 23) { + if (defaultlanguage == 'F') { + printf("Nom du compte trop long. Entrez un nom de compte de 4-23 caractères.\n"); + ladmin_log("Nom du compte trop long. Entrez un nom de compte de 4-23 caractères." RETCODE); + } else { + printf("Account name is too long. Please input an account name of 4-23 bytes.\n"); + ladmin_log("Account name is too long. Please input an account name of 4-23 bytes." RETCODE); + } + return 0; + } + + return 1; +} + +//--------------------------------------------------- +// E-mail check: return 0 (not correct) or 1 (valid). +//--------------------------------------------------- +int e_mail_check(unsigned char *email) { + char ch; + unsigned char* last_arobas; + + // athena limits + if (strlen(email) < 3 || strlen(email) > 39) + return 0; + + // part of RFC limits (official reference of e-mail description) + if (strchr(email, '@') == NULL || email[strlen(email)-1] == '@') + return 0; + + if (email[strlen(email)-1] == '.') + return 0; + + last_arobas = strrchr(email, '@'); + + if (strstr(last_arobas, "@.") != NULL || + strstr(last_arobas, "..") != NULL) + return 0; + + for(ch = 1; ch < 32; ch++) { + if (strchr(last_arobas, ch) != NULL) { + return 0; + break; + } + } + + if (strchr(last_arobas, ' ') != NULL || + strchr(last_arobas, ';') != NULL) + return 0; + + // all correct + return 1; +} + +//---------------------------------- +// Sub-function: Input of a password +//---------------------------------- +int typepasswd(char * password) { + char password1[1023], password2[1023]; + int letter; + int i; + + if (defaultlanguage == 'F') { + ladmin_log("Aucun mot de passe n'a été donné. Demande d'un mot de passe." RETCODE); + } else { + ladmin_log("No password was given. Request to obtain a password." RETCODE); + } + + memset(password1, '\0', sizeof(password1)); + memset(password2, '\0', sizeof(password2)); + if (defaultlanguage == 'F') + printf("\033[1;36m Entrez le mot de passe > \033[0;32;42m"); + else + printf("\033[1;36m Type the password > \033[0;32;42m"); + i = 0; + while ((letter = getchar()) != '\n') + password1[i++] = letter; + if (defaultlanguage == 'F') + printf("\033[0m\033[1;36m Ré-entrez le mot de passe > \033[0;32;42m"); + else + printf("\033[0m\033[1;36m Verify the password > \033[0;32;42m"); + i = 0; + while ((letter = getchar()) != '\n') + password2[i++] = letter; + + printf("\033[0m"); + fflush(stdout); + fflush(stdin); + + if (strcmp(password1, password2) != 0) { + if (defaultlanguage == 'F') { + printf("Erreur de vérification du mot de passe: Saisissez le même mot de passe svp.\n"); + ladmin_log("Erreur de vérification du mot de passe: Saisissez le même mot de passe svp." RETCODE); + ladmin_log(" Premier mot de passe: %s, second mot de passe: %s." RETCODE, password1, password2); + } else { + printf("Password verification failed. Please input same password.\n"); + ladmin_log("Password verification failed. Please input same password." RETCODE); + ladmin_log(" First password: %s, second password: %s." RETCODE, password1, password2); + } + return 0; + } + if (defaultlanguage == 'F') { + ladmin_log("Mot de passe saisi: %s." RETCODE, password1); + } else { + ladmin_log("Typed password: %s." RETCODE, password1); + } + strcpy(password, password1); + return 1; +} + +//------------------------------------------------------------------------------------ +// Sub-function: Test of the validity of password (return 0 if incorrect, and 1 if ok) +//------------------------------------------------------------------------------------ +int verify_password(char * password) { + int i; + + for(i = 0; password[i]; i++) { + if (password[i] < 32) { + if (defaultlanguage == 'F') { + printf("Caractère interdit trouvé dans le mot de passe (%d%s caractère).\n", i+1, makeordinal(i+1)); + ladmin_log("Caractère interdit trouvé dans le nom du compte (%d%s caractère)." RETCODE, i+1, makeordinal(i+1)); + } else { + printf("Illegal character found in the password (%d%s character).\n", i+1, makeordinal(i+1)); + ladmin_log("Illegal character found in the password (%d%s character)." RETCODE, i+1, makeordinal(i+1)); + } + return 0; + } + } + + if (strlen(password) < 4) { + if (defaultlanguage == 'F') { + printf("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n"); + ladmin_log("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères." RETCODE); + } else { + printf("Account name is too short. Please input an account name of 4-23 bytes.\n"); + ladmin_log("Account name is too short. Please input an account name of 4-23 bytes." RETCODE); + } + return 0; + } + + if (strlen(password) > 23) { + if (defaultlanguage == 'F') { + printf("Mot de passe trop long. Entrez un mot de passe de 4-23 caractères.\n"); + ladmin_log("Mot de passe trop long. Entrez un mot de passe de 4-23 caractères." RETCODE); + } else { + printf("Password is too long. Please input a password of 4-23 bytes.\n"); + ladmin_log("Password is too long. Please input a password of 4-23 bytes." RETCODE); + } + return 0; + } + + return 1; +} + +//------------------------------------------------------------------ +// Sub-function: Check the name of a command (return complete name) +//----------------------------------------------------------------- +int check_command(char * command) { +// help + if (strncmp(command, "aide", 2) == 0 && strncmp(command, "aide", strlen(command)) == 0) // not 1 letter command: 'aide' or 'add'? + strcpy(command, "aide"); + else if (strncmp(command, "help", 1) == 0 && strncmp(command, "help", strlen(command)) == 0) + strcpy(command, "help"); +// general commands + else if (strncmp(command, "add", 2) == 0 && strncmp(command, "add", strlen(command)) == 0) // not 1 letter command: 'aide' or 'add'? + strcpy(command, "add"); + else if ((strncmp(command, "ban", 3) == 0 && strncmp(command, "ban", strlen(command)) == 0) || + (strncmp(command, "banish", 4) == 0 && strncmp(command, "banish", strlen(command)) == 0)) + strcpy(command, "ban"); + else if ((strncmp(command, "banadd", 4) == 0 && strncmp(command, "banadd", strlen(command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ? + strcmp(command, "ba") == 0) + strcpy(command, "banadd"); + else if ((strncmp(command, "banset", 4) == 0 && strncmp(command, "banset", strlen(command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ? + strcmp(command, "bs") == 0) + strcpy(command, "banset"); + else if (strncmp(command, "block", 2) == 0 && strncmp(command, "block", strlen(command)) == 0) + strcpy(command, "block"); + else if (strncmp(command, "check", 2) == 0 && strncmp(command, "check", strlen(command)) == 0) // not 1 letter command: 'check' or 'create'? + strcpy(command, "check"); + else if (strncmp(command, "create", 2) == 0 && strncmp(command, "create", strlen(command)) == 0) // not 1 letter command: 'check' or 'create'? + strcpy(command, "create"); + else if (strncmp(command, "delete", 1) == 0 && strncmp(command, "delete", strlen(command)) == 0) + strcpy(command, "delete"); + else if ((strncmp(command, "email", 2) == 0 && strncmp(command, "email", strlen(command)) == 0) || // not 1 letter command: 'email', 'end' or 'exit'? + (strncmp(command, "e-mail", 2) == 0 && strncmp(command, "e-mail", strlen(command)) == 0)) + strcpy(command, "email"); + else if (strncmp(command, "getcount", 2) == 0 && strncmp(command, "getcount", strlen(command)) == 0) // not 1 letter command: 'getcount' or 'gm'? + strcpy(command, "getcount"); +// else if (strncmp(command, "gm", 2) == 0 && strncmp(command, "gm", strlen(command)) == 0) // not 1 letter command: 'getcount' or 'gm'? +// strcpy(command, "gm"); +// else if (strncmp(command, "id", 2) == 0 && strncmp(command, "id", strlen(command)) == 0) // not 1 letter command: 'id' or 'info'? +// strcpy(command, "id"); + else if (strncmp(command, "info", 2) == 0 && strncmp(command, "info", strlen(command)) == 0) // not 1 letter command: 'id' or 'info'? + strcpy(command, "info"); +// else if (strncmp(command, "kami", 4) == 0 && strncmp(command, "kami", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'? +// strcpy(command, "kami"); +// else if (strncmp(command, "kamib", 5) == 0 && strncmp(command, "kamib", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'? +// strcpy(command, "kamib"); + else if ((strncmp(command, "language", 2) == 0 && strncmp(command, "language", strlen(command)) == 0)) // not 1 letter command: 'language' or 'list'? + strcpy(command, "language"); + else if ((strncmp(command, "list", 2) == 0 && strncmp(command, "list", strlen(command)) == 0) || // 'list' is default list command // not 1 letter command: 'language' or 'list'? + strcmp(command, "ls") == 0) + strcpy(command, "list"); + else if ((strncmp(command, "listban", 5) == 0 && strncmp(command, "listban", strlen(command)) == 0) || + (strncmp(command, "lsban", 3) == 0 && strncmp(command, "lsban", strlen(command)) == 0) || + strcmp(command, "lb") == 0) + strcpy(command, "listban"); + else if ((strncmp(command, "listgm", 5) == 0 && strncmp(command, "listgm", strlen(command)) == 0) || + (strncmp(command, "lsgm", 3) == 0 && strncmp(command, "lsgm", strlen(command)) == 0) || + strcmp(command, "lg") == 0) + strcpy(command, "listgm"); + else if ((strncmp(command, "listok", 5) == 0 && strncmp(command, "listok", strlen(command)) == 0) || + (strncmp(command, "lsok", 3) == 0 && strncmp(command, "lsok", strlen(command)) == 0) || + strcmp(command, "lo") == 0) + strcpy(command, "listok"); + else if (strncmp(command, "memo", 1) == 0 && strncmp(command, "memo", strlen(command)) == 0) + strcpy(command, "memo"); + else if (strncmp(command, "name", 1) == 0 && strncmp(command, "name", strlen(command)) == 0) + strcpy(command, "name"); + else if ((strncmp(command, "password", 1) == 0 && strncmp(command, "password", strlen(command)) == 0) || + strcmp(command, "passwd") == 0) + strcpy(command, "password"); + else if (strncmp(command, "reloadgm", 1) == 0 && strncmp(command, "reloadgm", strlen(command)) == 0) + strcpy(command, "reloadgm"); + else if (strncmp(command, "search", 3) == 0 && strncmp(command, "search", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'? + strcpy(command, "search"); // not 2 letters command: 'search' or 'sex'? +// else if (strncmp(command, "sex", 3) == 0 && strncmp(command, "sex", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'? +// strcpy(command, "sex"); // not 2 letters command: 'search' or 'sex'? + else if (strncmp(command, "state", 2) == 0 && strncmp(command, "state", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'? + strcpy(command, "state"); + else if ((strncmp(command, "timeadd", 5) == 0 && strncmp(command, "timeadd", strlen(command)) == 0) || // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'? + strcmp(command, "ta") == 0) + strcpy(command, "timeadd"); + else if ((strncmp(command, "timeset", 5) == 0 && strncmp(command, "timeset", strlen(command)) == 0) || // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'? + strcmp(command, "ts") == 0) + strcpy(command, "timeset"); + else if ((strncmp(command, "unban", 5) == 0 && strncmp(command, "unban", strlen(command)) == 0) || + (strncmp(command, "unbanish", 4) == 0 && strncmp(command, "unbanish", strlen(command)) == 0)) + strcpy(command, "unban"); + else if (strncmp(command, "unblock", 4) == 0 && strncmp(command, "unblock", strlen(command)) == 0) + strcpy(command, "unblock"); + else if (strncmp(command, "version", 1) == 0 && strncmp(command, "version", strlen(command)) == 0) + strcpy(command, "version"); + else if (strncmp(command, "who", 1) == 0 && strncmp(command, "who", strlen(command)) == 0) + strcpy(command, "who"); +// quit + else if (strncmp(command, "quit", 1) == 0 && strncmp(command, "quit", strlen(command)) == 0) + strcpy(command, "quit"); + else if (strncmp(command, "exit", 2) == 0 && strncmp(command, "exit", strlen(command)) == 0) // not 1 letter command: 'email', 'end' or 'exit'? + strcpy(command, "exit"); + else if (strncmp(command, "end", 2) == 0 && strncmp(command, "end", strlen(command)) == 0) // not 1 letter command: 'email', 'end' or 'exit'? + strcpy(command, "end"); + + return 0; +} + +//----------------------------------------- +// Sub-function: Display commands of ladmin +//----------------------------------------- +void display_help(char* param, int language) { + char command[1023]; + int i; + + memset(command, '\0', sizeof(command)); + + if (sscanf(param, "%s ", command) < 1 || strlen(command) == 0) + strcpy(command, ""); // any value that is not a command + + if (command[0] == '?') { + if (defaultlanguage == 'F') + strcpy(command, "aide"); + else + strcpy(command, "help"); + } + + // lowercase for command + for (i = 0; command[i]; i++) + command[i] = tolower(command[i]); + + // Analyse of the command + check_command(command); // give complete name to the command + + if (defaultlanguage == 'F') { + ladmin_log("Affichage des commandes ou d'une commande." RETCODE); + } else { + ladmin_log("Displaying of the commands or a command." RETCODE); + } + + if (language == 1) { + if (strcmp(command, "aide") == 0) { + printf("aide/help/?\n"); + printf(" Affiche la description des commandes\n"); + printf("aide/help/? [commande]\n"); + printf(" Affiche la description de la commande specifiée\n"); + } else if (strcmp(command, "help") == 0 ) { + printf("aide/help/?\n"); + printf(" Display the description of the commands\n"); + printf("aide/help/? [command]\n"); + printf(" Display the description of the specified command\n"); +// general commands + } else if (strcmp(command, "add") == 0) { + printf("add <nomcompte> <sexe> <motdepasse>\n"); + printf(" Crée un compte avec l'email par défaut (a@a.com).\n"); + printf(" Concernant le sexe, seule la première lettre compte (F ou M).\n"); + printf(" L'e-mail est a@a.com (e-mail par défaut). C'est comme n'avoir aucun e-mail.\n"); + printf(" Lorsque motdepasse est omis, la saisie se fait sans que la frappe se voit.\n"); + printf(" <exemple> add testname Male testpass\n"); + } else if (strcmp(command, "ban") == 0) { + printf("ban/banish aaaa/mm/jj hh:mm:ss <nom compte>\n"); + printf(" Change la date de fin de bannissement d'un compte.\n"); + printf(" Comme banset, mais <nom compte> est à la fin.\n"); + } else if (strcmp(command, "banadd") == 0) { + printf("banadd <nomcompte> <Modificateur>\n"); + printf(" Ajoute ou soustrait du temps à la date de banissement d'un compte.\n"); + printf(" Les modificateurs sont construits comme suit:\n"); + printf(" Valeur d'ajustement (-1, 1, +1, etc...)\n"); + printf(" Elément modifié:\n"); + printf(" a ou y: année\n"); + printf(" m: mois\n"); + printf(" j ou d: jour\n"); + printf(" h: heure\n"); + printf(" mn: minute\n"); + printf(" s: seconde\n"); + printf(" <exemple> banadd testname +1m-2mn1s-6a\n"); + printf(" Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n"); + printf(" et 6 ans dans le même temps.\n"); + printf("NOTE: Si vous modifez la date de banissement d'un compte non bani,\n"); + printf(" vous indiquez comme date (le moment actuel +- les ajustements)\n"); + } else if (strcmp(command, "banset") == 0) { + printf("banset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n"); + printf(" Change la date de fin de bannissement d'un compte.\n"); + printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); + printf("banset <nomcompte> 0\n"); + printf(" Débanni un compte (0 = de-banni).\n"); + } else if (strcmp(command, "block") == 0) { + printf("block <nom compte>\n"); + printf(" Place le status d'un compte à 5 (You have been blocked by the GM Team).\n"); + printf(" La commande est l'équivalent de state <nom_compte> 5.\n"); + } else if (strcmp(command, "check") == 0) { + printf("check <nomcompte> <motdepasse>\n"); + printf(" Vérifie la validité d'un mot de passe pour un compte\n"); + printf(" NOTE: Le serveur n'enverra jamais un mot de passe.\n"); + printf(" C'est la seule méthode que vous possédez pour savoir\n"); + printf(" si un mot de passe est le bon. L'autre méthode est\n"); + printf(" d'avoir un accès ('physique') au fichier des comptes.\n"); + } else if (strcmp(command, "create") == 0) { + printf("create <nomcompte> <sexe> <email> <motdepasse>\n"); + printf(" Comme la commande add, mais avec l'e-mail en plus.\n"); + printf(" <exemple> create testname Male mon@mail.com testpass\n"); + } else if (strcmp(command, "delete") == 0) { + printf("del <nom compte>\n"); + printf(" Supprime un compte.\n"); + printf(" La commande demande confirmation. Après confirmation, le compte est détruit.\n"); + } else if (strcmp(command, "email") == 0) { + printf("email <nomcompte> <email>\n"); + printf(" Modifie l'e-mail d'un compte.\n"); + } else if (strcmp(command, "getcount") == 0) { + printf("getcount\n"); + printf(" Donne le nombre de joueurs en ligne par serveur de char.\n"); + } else if (strcmp(command, "gm") == 0) { + printf("gm <nomcompte> [Niveau_GM]\n"); + printf(" Modifie le niveau de GM d'un compte.\n"); + printf(" Valeur par défaut: 0 (suppression du niveau de GM).\n"); + printf(" <exemple> gm nomtest 80\n"); + } else if (strcmp(command, "id") == 0) { + printf("id <nom compte>\n"); + printf(" Donne l'id d'un compte.\n"); + } else if (strcmp(command, "info") == 0) { + printf("info <idcompte>\n"); + printf(" Affiche les informations sur un compte.\n"); + } else if (strcmp(command, "kami") == 0) { + printf("kami <message>\n"); + printf(" Envoi un message général sur tous les serveurs de map (en jaune).\n"); + } else if (strcmp(command, "kamib") == 0) { + printf("kamib <message>\n"); + printf(" Envoi un message général sur tous les serveurs de map (en bleu).\n"); + } else if (strcmp(command, "language") == 0) { + printf("language <langue>\n"); + printf(" Change la langue d'affichage.\n"); + printf(" Langues possibles: 'Français' ou 'English'.\n"); + } else if (strcmp(command, "list") == 0) { + printf("list/ls [Premier_id [Dernier_id]]\n"); + printf(" Affiche une liste de comptes.\n"); + printf(" 'Premier_id', 'Dernier_id': indique les identifiants de départ et de fin.\n"); + printf(" La recherche par nom n'est pas possible avec cette commande.\n"); + printf(" <example> list 10 9999999\n"); + } else if (strcmp(command, "listban") == 0) { + printf("listBan/lsBan [Premier_id [Dernier_id]]\n"); + printf(" Comme list/ls, mais seulement pour les comptes avec statut ou bannis.\n"); + } else if (strcmp(command, "listgm") == 0) { + printf("listGM/lsGM [Premier_id [Dernier_id]]\n"); + printf(" Comme list/ls, mais seulement pour les comptes GM.\n"); + } else if (strcmp(command, "listok") == 0) { + printf("listOK/lsOK [Premier_id [Dernier_id]]\n"); + printf(" Comme list/ls, mais seulement pour les comptes sans statut et non bannis.\n"); + } else if (strcmp(command, "memo") == 0) { + printf("memo <nomcompte> <memo>\n"); + printf(" Modifie le mémo d'un compte.\n"); + printf(" 'memo': Il peut avoir jusqu'à 253 caractères (avec des espaces ou non).\n"); + } else if (strcmp(command, "name") == 0) { + printf("name <idcompte>\n"); + printf(" Donne le nom d'un compte.\n"); + } else if (strcmp(command, "password") == 0) { + printf("passwd <nomcompte> <nouveaumotdepasse>\n"); + printf(" Change le mot de passe d'un compte.\n"); + printf(" Lorsque nouveaumotdepasse est omis,\n"); + printf(" la saisie se fait sans que la frappe ne se voit.\n"); + } else if (strcmp(command, "reloadgm") == 0) { + printf("reloadGM\n"); + printf(" Reload GM configuration file\n"); + } else if (strcmp(command, "search") == 0) { + printf("search <expression>\n"); + printf(" Cherche des comptes.\n"); + printf(" Affiche les comptes dont les noms correspondent.\n"); +// printf("search -r/-e/--expr/--regex <expression>\n"); +// printf(" Cherche des comptes par expression regulière.\n"); +// printf(" Affiche les comptes dont les noms correspondent.\n"); + } else if (strcmp(command, "sex") == 0) { + printf("sex <nomcompte> <sexe>\n"); + printf(" Modifie le sexe d'un compte.\n"); + printf(" <exemple> sex testname Male\n"); + } else if (strcmp(command, "state") == 0) { + printf("state <nomcompte> <nouveaustatut> <message_erreur_7>\n"); + printf(" Change le statut d'un compte.\n"); + printf(" 'nouveaustatut': Le statut est le même que celui du packet 0x006a + 1.\n"); + printf(" les possibilités sont:\n"); + printf(" 0 = Compte ok\n"); + printf(" 1 = Unregistered ID\n"); + printf(" 2 = Incorrect Password\n"); + printf(" 3 = This ID is expired\n"); + printf(" 4 = Rejected from Server\n"); + printf(" 5 = You have been blocked by the GM Team\n"); + printf(" 6 = Your Game's EXE file is not the latest version\n"); + printf(" 7 = You are Prohibited to log in until...\n"); + printf(" 8 = Server is jammed due to over populated\n"); + printf(" 9 = No MSG\n"); + printf(" 100 = This ID has been totally erased\n"); + printf(" all other values are 'No MSG', then use state 9 please.\n"); + printf(" 'message_erreur_7': message du code erreur 6 =\n"); + printf(" = Your are Prohibited to log in until... (packet 0x006a)\n"); + } else if (strcmp(command, "timeadd") == 0) { + printf("timeadd <nomcompte> <modificateur>\n"); + printf(" Ajoute/soustrait du temps à la limite de validité d'un compte.\n"); + printf(" Le modificateur est composé comme suit:\n"); + printf(" Valeur modificatrice (-1, 1, +1, etc...)\n"); + printf(" Elément modifié:\n"); + printf(" a ou y: année\n"); + printf(" m: mois\n"); + printf(" j ou d: jour\n"); + printf(" h: heure\n"); + printf(" mn: minute\n"); + printf(" s: seconde\n"); + printf(" <exemple> timeadd testname +1m-2mn1s-6a\n"); + printf(" Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n"); + printf(" et 6 ans dans le même temps.\n"); + printf("NOTE: Vous ne pouvez pas modifier une limite de validité illimitée. Si vous\n"); + printf(" désirez le faire, c'est que vous voulez probablement créer un limite de\n"); + printf(" validité limitée. Donc, en premier, fixé une limite de valitidé.\n"); + } else if (strcmp(command, "timeadd") == 0) { + printf("timeset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n"); + printf(" Change la limite de validité d'un compte.\n"); + printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); + printf("timeset <nomcompte> 0\n"); + printf(" Donne une limite de validité illimitée (0 = illimitée).\n"); + } else if (strcmp(command, "unban") == 0) { + printf("unban/unbanish <nom compte>\n"); + printf(" Ote le banissement d'un compte.\n"); + printf(" La commande est l'équivalent de banset <nom_compte> 0.\n"); + } else if (strcmp(command, "unblock") == 0) { + printf("unblock <nom compte>\n"); + printf(" Place le status d'un compte à 0 (Compte ok).\n"); + printf(" La commande est l'équivalent de state <nom_compte> 0.\n"); + } else if (strcmp(command, "version") == 0) { + printf("version\n"); + printf(" Affiche la version du login-serveur.\n"); + } else if (strcmp(command, "who") == 0) { + printf("who <nom compte>\n"); + printf(" Affiche les informations sur un compte.\n"); +// quit + } else if (strcmp(command, "quit") == 0 || + strcmp(command, "exit") == 0 || + strcmp(command, "end") == 0) { + printf("quit/end/exit\n"); + printf(" Fin du programme d'administration.\n"); +// unknown command + } else { + if (strlen(command) > 0) + printf("Commande inconnue [%s] pour l'aide. Affichage de toutes les commandes.\n", command); + printf(" aide/help/? -- Affiche cet aide\n"); + printf(" aide/help/? [commande] -- Affiche l'aide de la commande\n"); + printf(" add <nomcompte> <sexe> <motdepasse> -- Crée un compte (sans email)\n"); + printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom compte> -- Fixe la date finale de banismnt\n"); + printf(" banadd/ba <nomcompte> <modificateur> -- Ajout/soustrait du temps à la\n"); + printf(" exemple: ba moncompte +1m-2mn1s-2y date finale de banissement\n"); + printf(" banset/bs <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la date fin de banisemnt\n"); + printf(" banset/bs <nomcompte> 0 -- Dé-banis un compte.\n"); + printf(" block <nom compte> -- Mets le status d'un compte à 5 (blocked by the GM Team)\n"); + printf(" check <nomcompte> <motdepasse> -- Vérifie un mot de passe d'un compte\n"); + printf(" create <nomcompte> <sexe> <email> <motdepasse> -- Crée un compte (avec email)\n"); + printf(" del <nom compte> -- Supprime un compte\n"); + printf(" email <nomcompte> <email> -- Modifie l'e-mail d'un compte\n"); + printf(" getcount -- Donne le nb de joueurs en ligne\n"); + printf(" gm <nomcompte> [Niveau_GM] -- Modifie le niveau de GM d'un compte\n"); + printf(" id <nom compte> -- Donne l'id d'un compte\n"); + printf(" info <idcompte> -- Affiche les infos sur un compte\n"); + printf(" kami <message> -- Envoi un message général (en jaune)\n"); + printf(" kamib <message> -- Envoi un message général (en bleu)\n"); + printf(" language <langue> -- Change la langue d'affichage.\n"); + printf(" list/ls [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n"); + printf(" listBan/lsBan [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n"); + printf(" avec un statut ou bannis\n"); + printf(" listGM/lsGM [Premier_id [Dernier_id] ] -- Affiche une liste de comptes GM\n"); + printf(" listOK/lsOK [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n"); + printf(" sans status et non bannis\n"); + printf(" memo <nomcompte> <memo> -- Modifie le memo d'un compte\n"); + printf(" name <idcompte> -- Donne le nom d'un compte\n"); + printf(" passwd <nomcompte> <nouveaumotdepasse> -- Change le mot de passe d'un compte\n"); + printf(" quit/end/exit -- Fin du programme d'administation\n"); + printf(" reloadGM -- Recharger le fichier de config des GM\n"); + printf(" search <expression> -- Cherche des comptes\n"); +// printf(" search -e/-r/--expr/--regex <expression> -- Cherche des comptes par REGEX\n"); + printf(" sex <nomcompte> <sexe> -- Modifie le sexe d'un compte\n"); + printf(" state <nomcompte> <nouveaustatut> <messageerr7> -- Change le statut d'1 compte\n"); + printf(" timeadd/ta <nomcompte> <modificateur> -- Ajout/soustrait du temps à la\n"); + printf(" exemple: ta moncompte +1m-2mn1s-2y limite de validité\n"); + printf(" timeset/ts <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la limite de validité\n"); + printf(" timeset/ts <nomcompte> 0 -- limite de validité = illimitée\n"); + printf(" unban/unbanish <nom compte> -- Ote le banissement d'un compte\n"); + printf(" unblock <nom compte> -- Mets le status d'un compte à 0 (Compte ok)\n"); + printf(" version -- Donne la version du login-serveur\n"); + printf(" who <nom compte> -- Affiche les infos sur un compte\n"); + printf(" Note: Pour les noms de compte avec des espaces, tapez \"<nom compte>\" (ou ').\n"); + } + } else { + if (strcmp(command, "aide") == 0) { + printf("aide/help/?\n"); + printf(" Display the description of the commands\n"); + printf("aide/help/? [command]\n"); + printf(" Display the description of the specified command\n"); + } else if (strcmp(command, "help") == 0 ) { + printf("aide/help/?\n"); + printf(" Display the description of the commands\n"); + printf("aide/help/? [command]\n"); + printf(" Display the description of the specified command\n"); +// general commands + } else if (strcmp(command, "add") == 0) { + printf("add <account_name> <sex> <password>\n"); + printf(" Create an account with the default email (a@a.com).\n"); + printf(" Concerning the sex, only the first letter is used (F or M).\n"); + printf(" The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.\n"); + printf(" When the password is omitted,\n"); + printf(" the input is done without displaying of the pressed keys.\n"); + printf(" <example> add testname Male testpass\n"); + } else if (strcmp(command, "ban") == 0) { + printf("ban/banish yyyy/mm/dd hh:mm:ss <account name>\n"); + printf(" Changes the final date of a banishment of an account.\n"); + printf(" Like banset, but <account name> is at end.\n"); + } else if (strcmp(command, "banadd") == 0) { + printf("banadd <account_name> <modifier>\n"); + printf(" Adds or substracts time from the final date of a banishment of an account.\n"); + printf(" Modifier is done as follows:\n"); + printf(" Adjustment value (-1, 1, +1, etc...)\n"); + printf(" Modified element:\n"); + printf(" a or y: year\n"); + printf(" m: month\n"); + printf(" j or d: day\n"); + printf(" h: hour\n"); + printf(" mn: minute\n"); + printf(" s: second\n"); + printf(" <example> banadd testname +1m-2mn1s-6y\n"); + printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + printf(" and 6 years at the same time.\n"); + printf("NOTE: If you modify the final date of a non-banished account,\n"); + printf(" you fix the final date to (actual time +- adjustments)\n"); + } else if (strcmp(command, "banset") == 0) { + printf("banset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); + printf(" Changes the final date of a banishment of an account.\n"); + printf(" Default time [hh:mm:ss]: 23:59:59.\n"); + printf("banset <account_name> 0\n"); + printf(" Set a non-banished account (0 = unbanished).\n"); + } else if (strcmp(command, "block") == 0) { + printf("block <account name>\n"); + printf(" Set state 5 (You have been blocked by the GM Team) to an account.\n"); + printf(" This command works like state <account_name> 5.\n"); + } else if (strcmp(command, "check") == 0) { + printf("check <account_name> <password>\n"); + printf(" Check the validity of a password for an account.\n"); + printf(" NOTE: Server will never sends back a password.\n"); + printf(" It's the only method you have to know if a password is correct.\n"); + printf(" The other method is to have a ('physical') access to the accounts file.\n"); + } else if (strcmp(command, "create") == 0) { + printf("create <account_name> <sex> <email> <password>\n"); + printf(" Like the 'add' command, but with e-mail moreover.\n"); + printf(" <example> create testname Male my@mail.com testpass\n"); + } else if (strcmp(command, "delete") == 0) { + printf("del <account name>\n"); + printf(" Remove an account.\n"); + printf(" This order requires confirmation. After confirmation, the account is deleted.\n"); + } else if (strcmp(command, "email") == 0) { + printf("email <account_name> <email>\n"); + printf(" Modify the e-mail of an account.\n"); + } else if (strcmp(command, "getcount") == 0) { + printf("getcount\n"); + printf(" Give the number of players online on all char-servers.\n"); + } else if (strcmp(command, "gm") == 0) { + printf("gm <account_name> [GM_level]\n"); + printf(" Modify the GM level of an account.\n"); + printf(" Default value remove GM level (GM level = 0).\n"); + printf(" <example> gm testname 80\n"); + } else if (strcmp(command, "id") == 0) { + printf("id <account name>\n"); + printf(" Give the id of an account.\n"); + } else if (strcmp(command, "info") == 0) { + printf("info <account_id>\n"); + printf(" Display complete information of an account.\n"); + } else if (strcmp(command, "kami") == 0) { + printf("kami <message>\n"); + printf(" Sends a broadcast message on all map-server (in yellow).\n"); + } else if (strcmp(command, "kamib") == 0) { + printf("kamib <message>\n"); + printf(" Sends a broadcast message on all map-server (in blue).\n"); + } else if (strcmp(command, "language") == 0) { + printf("language <language>\n"); + printf(" Change the language of displaying.\n"); + printf(" Possible languages: Français or English.\n"); + } else if (strcmp(command, "list") == 0) { + printf("list/ls [start_id [end_id]]\n"); + printf(" Display a list of accounts.\n"); + printf(" 'start_id', 'end_id': indicate end and start identifiers.\n"); + printf(" Research by name is not possible with this command.\n"); + printf(" <example> list 10 9999999\n"); + } else if (strcmp(command, "listban") == 0) { + printf("listBan/lsBan [start_id [end_id]]\n"); + printf(" Like list/ls, but only for accounts with state or banished.\n"); + } else if (strcmp(command, "listgm") == 0) { + printf("listGM/lsGM [start_id [end_id]]\n"); + printf(" Like list/ls, but only for GM accounts.\n"); + } else if (strcmp(command, "listok") == 0) { + printf("listOK/lsOK [start_id [end_id]]\n"); + printf(" Like list/ls, but only for accounts without state and not banished.\n"); + } else if (strcmp(command, "memo") == 0) { + printf("memo <account_name> <memo>\n"); + printf(" Modify the memo of an account.\n"); + printf(" 'memo': it can have until 253 characters (with spaces or not).\n"); + } else if (strcmp(command, "name") == 0) { + printf("name <account_id>\n"); + printf(" Give the name of an account.\n"); + } else if (strcmp(command, "password") == 0) { + printf("passwd <account_name> <new_password>\n"); + printf(" Change the password of an account.\n"); + printf(" When new password is omitted,\n"); + printf(" the input is done without displaying of the pressed keys.\n"); + } else if (strcmp(command, "reloadgm") == 0) { + printf("reloadGM\n"); + printf(" Reload GM configuration file\n"); + } else if (strcmp(command, "search") == 0) { + printf("search <expression>\n"); + printf(" Seek accounts.\n"); + printf(" Displays the accounts whose names correspond.\n"); +// printf("search -r/-e/--expr/--regex <expression>\n"); +// printf(" Seek accounts by regular expression.\n"); +// printf(" Displays the accounts whose names correspond.\n"); + } else if (strcmp(command, "sex") == 0) { + printf("sex <account_name> <sex>\n"); + printf(" Modify the sex of an account.\n"); + printf(" <example> sex testname Male\n"); + } else if (strcmp(command, "state") == 0) { + printf("state <account_name> <new_state> <error_message_#7>\n"); + printf(" Change the state of an account.\n"); + printf(" 'new_state': state is the state of the packet 0x006a + 1.\n"); + printf(" The possibilities are:\n"); + printf(" 0 = Account ok\n"); + printf(" 1 = Unregistered ID\n"); + printf(" 2 = Incorrect Password\n"); + printf(" 3 = This ID is expired\n"); + printf(" 4 = Rejected from Server\n"); + printf(" 5 = You have been blocked by the GM Team\n"); + printf(" 6 = Your Game's EXE file is not the latest version\n"); + printf(" 7 = You are Prohibited to log in until...\n"); + printf(" 8 = Server is jammed due to over populated\n"); + printf(" 9 = No MSG\n"); + printf(" 100 = This ID has been totally erased\n"); + printf(" all other values are 'No MSG', then use state 9 please.\n"); + printf(" 'error_message_#7': message of the code error 6\n"); + printf(" = Your are Prohibited to log in until... (packet 0x006a)\n"); + } else if (strcmp(command, "timeadd") == 0) { + printf("timeadd <account_name> <modifier>\n"); + printf(" Adds or substracts time from the validity limit of an account.\n"); + printf(" Modifier is done as follows:\n"); + printf(" Adjustment value (-1, 1, +1, etc...)\n"); + printf(" Modified element:\n"); + printf(" a or y: year\n"); + printf(" m: month\n"); + printf(" j or d: day\n"); + printf(" h: hour\n"); + printf(" mn: minute\n"); + printf(" s: second\n"); + printf(" <example> timeadd testname +1m-2mn1s-6y\n"); + printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + printf(" and 6 years at the same time.\n"); + printf("NOTE: You can not modify a unlimited validity limit.\n"); + printf(" If you want modify it, you want probably create a limited validity limit.\n"); + printf(" So, at first, you must set the validity limit to a date/time.\n"); + } else if (strcmp(command, "timeadd") == 0) { + printf("timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); + printf(" Changes the validity limit of an account.\n"); + printf(" Default time [hh:mm:ss]: 23:59:59.\n"); + printf("timeset <account_name> 0\n"); + printf(" Gives an unlimited validity limit (0 = unlimited).\n"); + } else if (strcmp(command, "unban") == 0) { + printf("unban/unbanish <account name>\n"); + printf(" Remove the banishment of an account.\n"); + printf(" This command works like banset <account_name> 0.\n"); + } else if (strcmp(command, "unblock") == 0) { + printf("unblock <account name>\n"); + printf(" Set state 0 (Account ok) to an account.\n"); + printf(" This command works like state <account_name> 0.\n"); + } else if (strcmp(command, "version") == 0) { + printf("version\n"); + printf(" Display the version of the login-server.\n"); + } else if (strcmp(command, "who") == 0) { + printf("who <account name>\n"); + printf(" Displays complete information of an account.\n"); +// quit + } else if (strcmp(command, "quit") == 0 || + strcmp(command, "exit") == 0 || + strcmp(command, "end") == 0) { + printf("quit/end/exit\n"); + printf(" End of the program of administration.\n"); +// unknown command + } else { + if (strlen(command) > 0) + printf("Unknown command [%s] for help. Displaying of all commands.\n", command); + printf(" aide/help/? -- Display this help\n"); + printf(" aide/help/? [command] -- Display the help of the command\n"); + printf(" add <account_name> <sex> <password> -- Create an account with default email\n"); + printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name> -- Change final date of a ban\n"); + printf(" banadd/ba <account_name> <modifier> -- Add or substract time from the final\n"); + printf(" example: ba apple +1m-2mn1s-2y date of a banishment of an account\n"); + printf(" banset/bs <account_name> yyyy/mm/dd [hh:mm:ss] -- Change final date of a ban\n"); + printf(" banset/bs <account_name> 0 -- Un-banish an account\n"); + printf(" block <account name> -- Set state 5 (blocked by the GM Team) to an account\n"); + printf(" check <account_name> <password> -- Check the validity of a password\n"); + printf(" create <account_name> <sex> <email> <passwrd> -- Create an account with email\n"); + printf(" del <account name> -- Remove an account\n"); + printf(" email <account_name> <email> -- Modify an email of an account\n"); + printf(" getcount -- Give the number of players online\n"); + printf(" gm <account_name> [GM_level] -- Modify the GM level of an account\n"); + printf(" id <account name> -- Give the id of an account\n"); + printf(" info <account_id> -- Display all information of an account\n"); + printf(" kami <message> -- Sends a broadcast message (in yellow)\n"); + printf(" kamib <message> -- Sends a broadcast message (in blue)\n"); + printf(" language <language> -- Change the language of displaying.\n"); + printf(" list/ls [First_id [Last_id]] -- Display a list of accounts\n"); + printf(" listBan/lsBan [First_id [Last_id] ] -- Display a list of accounts\n"); + printf(" with state or banished\n"); + printf(" listGM/lsGM [First_id [Last_id]] -- Display a list of GM accounts\n"); + printf(" listOK/lsOK [First_id [Last_id] ] -- Display a list of accounts\n"); + printf(" without state and not banished\n"); + printf(" memo <account_name> <memo> -- Modify the memo of an account\n"); + printf(" name <account_id> -- Give the name of an account\n"); + printf(" passwd <account_name> <new_password> -- Change the password of an account\n"); + printf(" quit/end/exit -- End of the program of administation\n"); + printf(" reloadGM -- Reload GM configuration file\n"); + printf(" search <expression> -- Seek accounts\n"); +// printf(" search -e/-r/--expr/--regex <expressn> -- Seek accounts by regular-expression\n"); + printf(" sex <nomcompte> <sexe> -- Modify the sex of an account\n"); + printf(" state <account_name> <new_state> <error_message_#7> -- Change the state\n"); + printf(" timeadd/ta <account_name> <modifier> -- Add or substract time from the\n"); + printf(" example: ta apple +1m-2mn1s-2y validity limit of an account\n"); + printf(" timeset/ts <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit\n"); + printf(" timeset/ts <account_name> 0 -- Give a unlimited validity limit\n"); + printf(" unban/unbanish <account name> -- Remove the banishment of an account\n"); + printf(" unblock <account name> -- Set state 0 (Account ok) to an account\n"); + printf(" version -- Gives the version of the login-server\n"); + printf(" who <account name> -- Display all information of an account\n"); + printf(" who <account name> -- Display all information of an account\n"); + printf(" Note: To use spaces in an account name, type \"<account name>\" (or ').\n"); + } + } +} + +//----------------------------- +// Sub-function: add an account +//----------------------------- +int addaccount(char* param, int emailflag) { + char name[1023], sex[1023], email[1023], password[1023]; +// int i; + + memset(name, '\0', sizeof(name)); + memset(sex, '\0', sizeof(sex)); + memset(email, '\0', sizeof(email)); + memset(password, '\0', sizeof(password)); + + if (emailflag == 0) { // add command + if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, sex, password) < 2 && // password can be void + sscanf(param, "'%[^']' %s %[^\r\n]", name, sex, password) < 2 && // password can be void + sscanf(param, "%s %s %[^\r\n]", name, sex, password) < 2) { // password can be void + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte, un sexe et un mot de passe svp.\n"); + printf("<exemple> add nomtest Male motdepassetest\n"); + ladmin_log("Nombre incorrect de paramètres pour créer un compte (commande 'add')." RETCODE); + } else { + printf("Please input an account name, a sex and a password.\n"); + printf("<example> add testname Male testpass\n"); + ladmin_log("Incomplete parameters to create an account ('add' command)." RETCODE); + } + return 136; + } + strcpy(email, "a@a.com"); // default email + } else { // 1: create command + if (sscanf(param, "\"%[^\"]\" %s %s %[^\r\n]", name, sex, email, password) < 3 && // password can be void + sscanf(param, "'%[^']' %s %s %[^\r\n]", name, sex, email, password) < 3 && // password can be void + sscanf(param, "%s %s %s %[^\r\n]", name, sex, email, password) < 3) { // password can be void + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte, un sexe et un mot de passe svp.\n"); + printf("<exemple> create nomtest Male mo@mail.com motdepassetest\n"); + ladmin_log("Nombre incorrect de paramètres pour créer un compte (commande 'create')." RETCODE); + } else { + printf("Please input an account name, a sex and a password.\n"); + printf("<example> create testname Male my@mail.com testpass\n"); + ladmin_log("Incomplete parameters to create an account ('create' command)." RETCODE); + } + return 136; + } + } + if (verify_accountname(name) == 0) { + return 102; + } + +/* for(i = 0; name[i]; i++) { + if (strchr("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz-_", name[i]) == NULL) { + if (defaultlanguage == 'F') { + printf("Caractère interdit (%c) trouvé dans le nom du compte (%d%s caractère).\n", name[i], i+1, makeordinal(i+1)); + ladmin_log("Caractère interdit (%c) trouvé dans le nom du compte (%d%s caractère)." RETCODE, name[i], i+1, makeordinal(i+1)); + } else { + printf("Illegal character (%c) found in the account name (%d%s character).\n", name[i], i+1, makeordinal(i+1)); + ladmin_log("Illegal character (%c) found in the account name (%d%s character)." RETCODE, name[i], i+1, makeordinal(i+1)); + } + return 101; + } + }*/ + + sex[0] = toupper(sex[0]); + if (strchr("MF", sex[0]) == NULL) { + if (defaultlanguage == 'F') { + printf("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex); + ladmin_log("Sexe incorrect [%s]. Entrez M ou F svp." RETCODE, sex); + } else { + printf("Illegal gender [%s]. Please input M or F.\n", sex); + ladmin_log("Illegal gender [%s]. Please input M or F." RETCODE, sex); + } + return 103; + } + + if (strlen(email) < 3) { + if (defaultlanguage == 'F') { + printf("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email); + ladmin_log("Email trop courte [%s]. Entrez une e-mail valide svp." RETCODE, email); + } else { + printf("Email is too short [%s]. Please input a valid e-mail.\n", email); + ladmin_log("Email is too short [%s]. Please input a valid e-mail." RETCODE, email); + } + return 109; + } + if (strlen(email) > 39) { + if (defaultlanguage == 'F') { + printf("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n", email); + ladmin_log("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp." RETCODE, email); + } else { + printf("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email); + ladmin_log("Email is too long [%s]. Please input an e-mail with 39 bytes at the most." RETCODE, email); + } + return 109; + } + if (e_mail_check(email) == 0) { + if (defaultlanguage == 'F') { + printf("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email); + ladmin_log("Email incorrecte [%s]. Entrez une e-mail valide svp." RETCODE, email); + } else { + printf("Invalid email [%s]. Please input a valid e-mail.\n", email); + ladmin_log("Invalid email [%s]. Please input a valid e-mail." RETCODE, email); + } + return 109; + } + + if (strlen(password) == 0) { + if (typepasswd(password) == 0) + return 108; + } + if (verify_password(password) == 0) + return 104; + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour créer un compte." RETCODE); + } else { + ladmin_log("Request to login-server to create an account." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7930; + memcpy(WFIFOP(login_fd,2), name, 24); + memcpy(WFIFOP(login_fd,26), password, 24); + WFIFOB(login_fd,50) = sex[0]; + memcpy(WFIFOP(login_fd,51), email, 40); + WFIFOSET(login_fd,91); + bytes_to_read = 1; + + return 0; +} + +//--------------------------------------------------------------------------------- +// Sub-function: Add/substract time to the final date of a banishment of an account +//--------------------------------------------------------------------------------- +int banaddaccount(char* param) { + char name[1023], modif[1023]; + int year, month, day, hour, minute, second; + char * p_modif; + int value, i; + + memset(name, '\0', sizeof(name)); + memset(modif, '\0', sizeof(modif)); + year = month = day = hour = minute = second = 0; + + if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 && + sscanf(param, "'%[^']' %[^\r\n]", name, modif) < 2 && + sscanf(param, "%s %[^\r\n]", name, modif) < 2) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte et un modificateur svp.\n"); + printf(" <exemple> banadd nomtest +1m-2mn1s-6y\n"); + printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); + printf(" et 6 ans dans le même temps.\n"); + ladmin_log("Nombre incorrect de paramètres pour modifier la fin de ban d'un compte (commande 'banadd')." RETCODE); + } else { + printf("Please input an account name and a modifier.\n"); + printf(" <example>: banadd testname +1m-2mn1s-6y\n"); + printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + printf(" and 6 years at the same time.\n"); + ladmin_log("Incomplete parameters to modify the ban date/time of an account ('banadd' command)." RETCODE); + } + return 136; + } + if (verify_accountname(name) == 0) { + return 102; + } + + // lowercase for modif + for (i = 0; modif[i]; i++) + modif[i] = tolower(modif[i]); + p_modif = modif; + while (strlen(p_modif) > 0) { + value = atoi(p_modif); + if (value == 0) { + p_modif++; + } else { + if (p_modif[0] == '-' || p_modif[0] == '+') + p_modif++; + while (strlen(p_modif) > 0 && p_modif[0] >= '0' && p_modif[0] <= '9') { + p_modif++; + } + if (p_modif[0] == 's') { + second = value; + p_modif++; + } else if (p_modif[0] == 'm' && p_modif[1] == 'n') { + minute = value; + p_modif += 2; + } else if (p_modif[0] == 'h') { + hour = value; + p_modif++; + } else if (p_modif[0] == 'd' || p_modif[0] == 'j') { + day = value; + p_modif += 2; + } else if (p_modif[0] == 'm') { + month = value; + p_modif++; + } else if (p_modif[0] == 'y' || p_modif[0] == 'a') { + year = value; + p_modif++; + } else { + p_modif++; + } + } + } + + if (defaultlanguage == 'F') { + printf(" année: %d\n", year); + printf(" mois: %d\n", month); + printf(" jour: %d\n", day); + printf(" heure: %d\n", hour); + printf(" minute: %d\n", minute); + printf(" seconde: %d\n", second); + } else { + printf(" year: %d\n", year); + printf(" month: %d\n", month); + printf(" day: %d\n", day); + printf(" hour: %d\n", hour); + printf(" minute: %d\n", minute); + printf(" second: %d\n", second); + } + + if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0 && second == 0) { + if (defaultlanguage == 'F') { + printf("Vous devez entrer un ajustement avec cette commande, svp:\n"); + printf(" Valeur d'ajustement (-1, 1, +1, etc...)\n"); + printf(" Element modifié:\n"); + printf(" a ou y: année\n"); + printf(" m: mois\n"); + printf(" j ou d: jour\n"); + printf(" h: heure\n"); + printf(" mn: minute\n"); + printf(" s: seconde\n"); + printf(" <exemple> banadd nomtest +1m-2mn1s-6y\n"); + printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); + printf(" et 6 ans dans le même temps.\n"); + ladmin_log("Aucun ajustement n'est pas un ajustement (commande 'banadd')." RETCODE); + } else { + printf("Please give an adjustment with this command:\n"); + printf(" Adjustment value (-1, 1, +1, etc...)\n"); + printf(" Modified element:\n"); + printf(" a or y: year\n"); + printf(" m: month\n"); + printf(" j or d: day\n"); + printf(" h: hour\n"); + printf(" mn: minute\n"); + printf(" s: second\n"); + printf(" <example> banadd testname +1m-2mn1s-6y\n"); + printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + printf(" and 6 years at the same time.\n"); + ladmin_log("No adjustment isn't an adjustment ('banadd' command)." RETCODE); + } + return 137; + } + if (year > 127 || year < -127) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement d'années correct (de -127 à 127), svp.\n"); + ladmin_log("Ajustement de l'année hors norme (commande 'banadd')." RETCODE); + } else { + printf("Please give a correct adjustment for the years (from -127 to 127).\n"); + ladmin_log("Abnormal adjustement for the year ('banadd' command)." RETCODE); + } + return 137; + } + if (month > 255 || month < -255) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement de mois correct (de -255 à 255), svp.\n"); + ladmin_log("Ajustement du mois hors norme (commande 'banadd')." RETCODE); + } else { + printf("Please give a correct adjustment for the months (from -255 to 255).\n"); + ladmin_log("Abnormal adjustement for the month ('banadd' command)." RETCODE); + } + return 137; + } + if (day > 32767 || day < -32767) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n"); + ladmin_log("Ajustement des jours hors norme (commande 'banadd')." RETCODE); + } else { + printf("Please give a correct adjustment for the days (from -32767 to 32767).\n"); + ladmin_log("Abnormal adjustement for the days ('banadd' command)." RETCODE); + } + return 137; + } + if (hour > 32767 || hour < -32767) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n"); + ladmin_log("Ajustement des heures hors norme (commande 'banadd')." RETCODE); + } else { + printf("Please give a correct adjustment for the hours (from -32767 to 32767).\n"); + ladmin_log("Abnormal adjustement for the hours ('banadd' command)." RETCODE); + } + return 137; + } + if (minute > 32767 || minute < -32767) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n"); + ladmin_log("Ajustement des minutes hors norme (commande 'banadd')." RETCODE); + } else { + printf("Please give a correct adjustment for the minutes (from -32767 to 32767).\n"); + ladmin_log("Abnormal adjustement for the minutes ('banadd' command)." RETCODE); + } + return 137; + } + if (second > 32767 || second < -32767) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n"); + ladmin_log("Ajustement des secondes hors norme (commande 'banadd')." RETCODE); + } else { + printf("Please give a correct adjustment for the seconds (from -32767 to 32767).\n"); + ladmin_log("Abnormal adjustement for the seconds ('banadd' command)." RETCODE); + } + return 137; + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour modifier la date d'un bannissement." RETCODE); + } else { + ladmin_log("Request to login-server to modify a ban date/time." RETCODE); + } + + WFIFOW(login_fd,0) = 0x794c; + memcpy(WFIFOP(login_fd,2), name, 24); + WFIFOW(login_fd,26) = (short)year; + WFIFOW(login_fd,28) = (short)month; + WFIFOW(login_fd,30) = (short)day; + WFIFOW(login_fd,32) = (short)hour; + WFIFOW(login_fd,34) = (short)minute; + WFIFOW(login_fd,36) = (short)second; + WFIFOSET(login_fd,38); + bytes_to_read = 1; + + return 0; +} + +//----------------------------------------------------------------------- +// Sub-function of sub-function banaccount, unbanaccount or bansetaccount +// Set the final date of a banishment of an account +//----------------------------------------------------------------------- +int bansetaccountsub(char* name, char* date, char* time) { + int year, month, day, hour, minute, second; + time_t ban_until_time; // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban) + struct tm *tmtime; + + year = month = day = hour = minute = second = 0; + ban_until_time = 0; + tmtime = localtime(&ban_until_time); // initialize + + if (verify_accountname(name) == 0) { + return 102; + } + + if (atoi(date) != 0 && + ((sscanf(date, "%d/%d/%d", &year, &month, &day) < 3 && + sscanf(date, "%d-%d-%d", &year, &month, &day) < 3 && + sscanf(date, "%d.%d.%d", &year, &month, &day) < 3) || + sscanf(time, "%d:%d:%d", &hour, &minute, &second) < 3)) { + if (defaultlanguage == 'F') { + printf("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n"); + printf("Vous pouvez aussi mettre 0 à la place si vous utilisez la commande 'banset'.\n"); + ladmin_log("Format incorrect pour la date/heure (commande'banset' ou 'ban')." RETCODE); + } else { + printf("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n"); + printf("You can imput 0 instead of if you use 'banset' command.\n"); + ladmin_log("Invalid format for the date/time ('banset' or 'ban' command)." RETCODE); + } + return 102; + } + + if (atoi(date) == 0) { + ban_until_time = 0; + } else { + if (year < 70) { + year = year + 100; + } + if (year >= 1900) { + year = year - 1900; + } + if (month < 1 || month > 12) { + if (defaultlanguage == 'F') { + printf("Entrez un mois correct svp (entre 1 et 12).\n"); + ladmin_log("Mois incorrect pour la date (command 'banset' ou 'ban')." RETCODE); + } else { + printf("Please give a correct value for the month (from 1 to 12).\n"); + ladmin_log("Invalid month for the date ('banset' or 'ban' command)." RETCODE); + } + return 102; + } + month = month - 1; + if (day < 1 || day > 31) { + if (defaultlanguage == 'F') { + printf("Entrez un jour correct svp (entre 1 et 31).\n"); + ladmin_log("Jour incorrect pour la date (command 'banset' ou 'ban')." RETCODE); + } else { + printf("Please give a correct value for the day (from 1 to 31).\n"); + ladmin_log("Invalid day for the date ('banset' or 'ban' command)." RETCODE); + } + return 102; + } + if (((month == 3 || month == 5 || month == 8 || month == 10) && day > 30) || + (month == 1 && day > 29)) { + if (defaultlanguage == 'F') { + printf("Entrez un jour correct en fonction du mois (%d) svp.\n", month); + ladmin_log("Jour incorrect pour ce mois correspondant (command 'banset' ou 'ban')." RETCODE); + } else { + printf("Please give a correct value for a day of this month (%d).\n", month); + ladmin_log("Invalid day for this month ('banset' or 'ban' command)." RETCODE); + } + return 102; + } + if (hour < 0 || hour > 23) { + if (defaultlanguage == 'F') { + printf("Entrez une heure correcte svp (entre 0 et 23).\n"); + ladmin_log("Heure incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE); + } else { + printf("Please give a correct value for the hour (from 0 to 23).\n"); + ladmin_log("Invalid hour for the time ('banset' or 'ban' command)." RETCODE); + } + return 102; + } + if (minute < 0 || minute > 59) { + if (defaultlanguage == 'F') { + printf("Entrez des minutes correctes svp (entre 0 et 59).\n"); + ladmin_log("Minute incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE); + } else { + printf("Please give a correct value for the minutes (from 0 to 59).\n"); + ladmin_log("Invalid minute for the time ('banset' or 'ban' command)." RETCODE); + } + return 102; + } + if (second < 0 || second > 59) { + if (defaultlanguage == 'F') { + printf("Entrez des secondes correctes svp (entre 0 et 59).\n"); + ladmin_log("Seconde incorrecte pour l'heure (command 'banset' ou 'ban')." RETCODE); + } else { + printf("Please give a correct value for the seconds (from 0 to 59).\n"); + ladmin_log("Invalid second for the time ('banset' or 'ban' command)." RETCODE); + } + return 102; + } + tmtime->tm_year = year; + tmtime->tm_mon = month; + tmtime->tm_mday = day; + tmtime->tm_hour = hour; + tmtime->tm_min = minute; + tmtime->tm_sec = second; + tmtime->tm_isdst = -1; // -1: no winter/summer time modification + ban_until_time = mktime(tmtime); + if (ban_until_time == -1) { + if (defaultlanguage == 'F') { + printf("Date incorrecte.\n"); + printf("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n"); + printf("Vous pouvez aussi mettre 0 à la place si vous utilisez la commande 'banset'.\n"); + ladmin_log("Date incorrecte. (command 'banset' ou 'ban')." RETCODE); + } else { + printf("Invalid date.\n"); + printf("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n"); + printf("You can imput 0 instead of if you use 'banset' command.\n"); + ladmin_log("Invalid date. ('banset' or 'ban' command)." RETCODE); + } + return 102; + } + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour fixer un ban." RETCODE); + } else { + ladmin_log("Request to login-server to set a ban." RETCODE); + } + + WFIFOW(login_fd,0) = 0x794a; + memcpy(WFIFOP(login_fd,2), name, 24); + WFIFOL(login_fd,26) = (int)ban_until_time; + WFIFOSET(login_fd,30); + bytes_to_read = 1; + + return 0; +} + +//--------------------------------------------------------------------- +// Sub-function: Set the final date of a banishment of an account (ban) +//--------------------------------------------------------------------- +int banaccount(char* param) { + char name[1023], date[1023], time[1023]; + + memset(name, '\0', sizeof(name)); + memset(date, '\0', sizeof(date)); + memset(time, '\0', sizeof(time)); + + if (sscanf(param, "%s %s \"%[^\"]\"", date, time, name) < 3 && + sscanf(param, "%s %s '%[^']'", date, time, name) < 3 && + sscanf(param, "%s %s %[^\r\n]", date, time, name) < 3) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte, une date et une heure svp.\n"); + printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n"); + printf(" banset <nom_du_compte> 0 (0 = dé-bani)\n"); + printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n"); + printf(" unban/unbanish <nom du compte>\n"); + printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); + ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'banset' ou 'ban')." RETCODE); + } else { + printf("Please input an account name, a date and a hour.\n"); + printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); + printf(" banset <account_name> 0 (0 = un-banished)\n"); + printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name>\n"); + printf(" unban/unbanish <account name>\n"); + printf(" Default time [hh:mm:ss]: 23:59:59.\n"); + ladmin_log("Incomplete parameters to set a ban ('banset' or 'ban' command)." RETCODE); + } + return 136; + } + + return bansetaccountsub(name, date, time); +} + +//------------------------------------------------------------------------ +// Sub-function: Set the final date of a banishment of an account (banset) +//------------------------------------------------------------------------ +int bansetaccount(char* param) { + char name[1023], date[1023], time[1023]; + + memset(name, '\0', sizeof(name)); + memset(date, '\0', sizeof(date)); + memset(time, '\0', sizeof(time)); + + if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void + sscanf(param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void + sscanf(param, "%s %s %[^\r\n]", name, date, time) < 2) { // if date = 0, time can be void + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte, une date et une heure svp.\n"); + printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n"); + printf(" banset <nom_du_compte> 0 (0 = dé-bani)\n"); + printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n"); + printf(" unban/unbanish <nom du compte>\n"); + printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); + ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'banset' ou 'ban')." RETCODE); + } else { + printf("Please input an account name, a date and a hour.\n"); + printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); + printf(" banset <account_name> 0 (0 = un-banished)\n"); + printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name>\n"); + printf(" unban/unbanish <account name>\n"); + printf(" Default time [hh:mm:ss]: 23:59:59.\n"); + ladmin_log("Incomplete parameters to set a ban ('banset' or 'ban' command)." RETCODE); + } + return 136; + } + + if (time[0] == '\0') + strcpy(time, "23:59:59"); + + return bansetaccountsub(name, date, time); +} + +//------------------------------------------------- +// Sub-function: unbanishment of an account (unban) +//------------------------------------------------- +int unbanaccount(char* param) { + char name[1023]; + + memset(name, '\0', sizeof(name)); + + if (strlen(param) == 0 || + (sscanf(param, "\"%[^\"]\"", name) < 1 && + sscanf(param, "'%[^']'", name) < 1 && + sscanf(param, "%[^\r\n]", name) < 1) || + strlen(name) == 0) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte svp.\n"); + printf("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n"); + printf(" banset <nom_du_compte> 0 (0 = dé-bani)\n"); + printf(" ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n"); + printf(" unban/unbanish <nom du compte>\n"); + printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); + ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'unban')." RETCODE); + } else { + printf("Please input an account name.\n"); + printf("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); + printf(" banset <account_name> 0 (0 = un-banished)\n"); + printf(" ban/banish yyyy/mm/dd hh:mm:ss <account name>\n"); + printf(" unban/unbanish <account name>\n"); + printf(" Default time [hh:mm:ss]: 23:59:59.\n"); + ladmin_log("Incomplete parameters to set a ban ('unban' command)." RETCODE); + } + return 136; + } + + return bansetaccountsub(name, "0", ""); +} + +//--------------------------------------------------------- +// Sub-function: Asking to check the validity of a password +// (Note: never send back a password with login-server!! security of passwords) +//--------------------------------------------------------- +int checkaccount(char* param) { + char name[1023], password[1023]; + + memset(name, '\0', sizeof(name)); + memset(password, '\0', sizeof(password)); + + if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 && // password can be void + sscanf(param, "'%[^']' %[^\r\n]", name, password) < 1 && // password can be void + sscanf(param, "%s %[^\r\n]", name, password) < 1) { // password can be void + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte svp.\n"); + printf("<exemple> check testname motdepasse\n"); + ladmin_log("Nombre incorrect de paramètres pour tester le mot d'un passe d'un compte (commande 'check')." RETCODE); + } else { + printf("Please input an account name.\n"); + printf("<example> check testname password\n"); + ladmin_log("Incomplete parameters to check the password of an account ('check' command)." RETCODE); + } + return 136; + } + + if (verify_accountname(name) == 0) { + return 102; + } + + if (strlen(password) == 0) { + if (typepasswd(password) == 0) + return 134; + } + if (verify_password(password) == 0) + return 131; + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour test un mot de passe." RETCODE); + } else { + ladmin_log("Request to login-server to check a password." RETCODE); + } + + WFIFOW(login_fd,0) = 0x793a; + memcpy(WFIFOP(login_fd,2), name, 24); + memcpy(WFIFOP(login_fd,26), password, 24); + WFIFOSET(login_fd,50); + bytes_to_read = 1; + + return 0; +} + +//------------------------------------------------ +// Sub-function: Asking for deletion of an account +//------------------------------------------------ +int delaccount(char* param) { + char name[1023]; + char letter; + char confirm[1023]; + int i; + + memset(name, '\0', sizeof(name)); + + if (strlen(param) == 0 || + (sscanf(param, "\"%[^\"]\"", name) < 1 && + sscanf(param, "'%[^']'", name) < 1 && + sscanf(param, "%[^\r\n]", name) < 1) || + strlen(name) == 0) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte svp.\n"); + printf("<exemple> del nomtestasupprimer\n"); + ladmin_log("Aucun nom donné pour supprimer un compte (commande 'delete')." RETCODE); + } else { + printf("Please input an account name.\n"); + printf("<example> del testnametodelete\n"); + ladmin_log("No name given to delete an account ('delete' command)." RETCODE); + } + return 136; + } + + if (verify_accountname(name) == 0) { + return 102; + } + + memset(confirm, '\0', sizeof(confirm)); + while ((confirm[0] != 'o' || defaultlanguage != 'F') && confirm[0] != 'n' && (confirm[0] != 'y' || defaultlanguage == 'F')) { + if (defaultlanguage == 'F') + printf("\033[1;36m ** Etes-vous vraiment sûr de vouloir SUPPRIMER le compte [$userid]? (o/n) > \033[0m"); + else + printf("\033[1;36m ** Are you really sure to DELETE account [$userid]? (y/n) > \033[0m"); + fflush(stdout); + memset(confirm, '\0', sizeof(confirm)); + i = 0; + while ((letter = getchar()) != '\n') + confirm[i++] = letter; + } + + if (confirm[0] == 'n') { + if (defaultlanguage == 'F') { + printf("Suppression annulée.\n"); + ladmin_log("Suppression annulée par l'utilisateur (commande 'delete')." RETCODE); + } else { + printf("Deletion canceled.\n"); + ladmin_log("Deletion canceled by user ('delete' command)." RETCODE); + } + return 121; + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour détruire un compte." RETCODE); + } else { + ladmin_log("Request to login-server to delete an acount." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7932; + memcpy(WFIFOP(login_fd,2), name, 24); + WFIFOSET(login_fd,26); + bytes_to_read = 1; + + return 0; +} + +//---------------------------------------------------------- +// Sub-function: Asking to modification of an account e-mail +//---------------------------------------------------------- +int changeemail(char* param) { + char name[1023], email[1023]; + + memset(name, '\0', sizeof(name)); + memset(email, '\0', sizeof(email)); + + if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, email) < 2 && + sscanf(param, "'%[^']' %[^\r\n]", name, email) < 2 && + sscanf(param, "%s %[^\r\n]", name, email) < 2) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte et une email svp.\n"); + printf("<exemple> email testname nouveauemail\n"); + ladmin_log("Nombre incorrect de paramètres pour changer l'email d'un compte (commande 'email')." RETCODE); + } else { + printf("Please input an account name and an email.\n"); + printf("<example> email testname newemail\n"); + ladmin_log("Incomplete parameters to change the email of an account ('email' command)." RETCODE); + } + return 136; + } + + if (verify_accountname(name) == 0) { + return 102; + } + + if (strlen(email) < 3) { + if (defaultlanguage == 'F') { + printf("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email); + ladmin_log("Email trop courte [%s]. Entrez une e-mail valide svp." RETCODE, email); + } else { + printf("Email is too short [%s]. Please input a valid e-mail.\n", email); + ladmin_log("Email is too short [%s]. Please input a valid e-mail." RETCODE, email); + } + return 109; + } + if (strlen(email) > 39) { + if (defaultlanguage == 'F') { + printf("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n", email); + ladmin_log("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp." RETCODE, email); + } else { + printf("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email); + ladmin_log("Email is too long [%s]. Please input an e-mail with 39 bytes at the most." RETCODE, email); + } + return 109; + } + if (e_mail_check(email) == 0) { + if (defaultlanguage == 'F') { + printf("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email); + ladmin_log("Email incorrecte [%s]. Entrez une e-mail valide svp." RETCODE, email); + } else { + printf("Invalid email [%s]. Please input a valid e-mail.\n", email); + ladmin_log("Invalid email [%s]. Please input a valid e-mail." RETCODE, email); + } + return 109; + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour changer une email." RETCODE); + } else { + ladmin_log("Request to login-server to change an email." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7940; + memcpy(WFIFOP(login_fd,2), name, 24); + memcpy(WFIFOP(login_fd,26), email, 40); + WFIFOSET(login_fd,66); + bytes_to_read = 1; + + return 0; +} + +//----------------------------------------------------- +// Sub-function: Asking of the number of online players +//----------------------------------------------------- +int getlogincount() { + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le nombre de joueurs en jeu." RETCODE); + } else { + ladmin_log("Request to login-server to obtain the # of online players." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7938; + WFIFOSET(login_fd,2); + bytes_to_read = 1; + + return 0; +} + +//---------------------------------------------------------- +// Sub-function: Asking to modify the GM level of an account +//---------------------------------------------------------- +int changegmlevel(char* param) { + char name[1023]; + int GM_level; + + memset(name, '\0', sizeof(name)); + GM_level = 0; + + if (sscanf(param, "\"%[^\"]\" %d", name, &GM_level) < 1 && + sscanf(param, "'%[^']' %d", name, &GM_level) < 1 && + sscanf(param, "%s %d", name, &GM_level) < 1) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte et un niveau de GM svp.\n"); + printf("<exemple> gm nomtest 80\n"); + ladmin_log("Nombre incorrect de paramètres pour changer le Niveau de GM d'un compte (commande 'gm')." RETCODE); + } else { + printf("Please input an account name and a GM level.\n"); + printf("<example> gm testname 80\n"); + ladmin_log("Incomplete parameters to change the GM level of an account ('gm' command)." RETCODE); + } + return 136; + } + + if (verify_accountname(name) == 0) { + return 102; + } + + if (GM_level < 0 || GM_level > 99) { + if (defaultlanguage == 'F') { + printf("Niveau de GM incorrect [%d]. Entrez une valeur de 0 à 99 svp.\n", GM_level); + ladmin_log("Niveau de GM incorrect [%d]. La valeur peut être de 0 à 99." RETCODE, GM_level); + } else { + printf("Illegal GM level [%d]. Please input a value from 0 to 99.\n", GM_level); + ladmin_log("Illegal GM level [%d]. The value can be from 0 to 99." RETCODE, GM_level); + } + return 103; + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour changer un niveau de GM." RETCODE); + } else { + ladmin_log("Request to login-server to change a GM level." RETCODE); + } + + WFIFOW(login_fd,0) = 0x793e; + memcpy(WFIFOP(login_fd,2), name, 24); + WFIFOB(login_fd,26) = GM_level; + WFIFOSET(login_fd,27); + bytes_to_read = 1; + + return 0; +} + +//--------------------------------------------- +// Sub-function: Asking to obtain an account id +//--------------------------------------------- +int idaccount(char* param) { + char name[1023]; + + memset(name, '\0', sizeof(name)); + + if (strlen(param) == 0 || + (sscanf(param, "\"%[^\"]\"", name) < 1 && + sscanf(param, "'%[^']'", name) < 1 && + sscanf(param, "%[^\r\n]", name) < 1) || + strlen(name) == 0) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte svp.\n"); + printf("<exemple> id nomtest\n"); + ladmin_log("Aucun nom donné pour rechecher l'id d'un compte (commande 'id')." RETCODE); + } else { + printf("Please input an account name.\n"); + printf("<example> id testname\n"); + ladmin_log("No name given to search an account id ('id' command)." RETCODE); + } + return 136; + } + + if (verify_accountname(name) == 0) { + return 102; + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour connaître l'id d'un compte." RETCODE); + } else { + ladmin_log("Request to login-server to know an account id." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7944; + memcpy(WFIFOP(login_fd,2), name, 24); + WFIFOSET(login_fd,26); + bytes_to_read = 1; + + return 0; +} + +//---------------------------------------------------------------------------- +// Sub-function: Asking to displaying information about an account (by its id) +//---------------------------------------------------------------------------- +int infoaccount(int account_id) { + if (account_id < 0) { + if (defaultlanguage == 'F') { + printf("Entrez un id ayant une valeur positive svp.\n"); + ladmin_log("Une valeur négative a été donné pour trouver le compte." RETCODE); + } else { + printf("Please input a positive value for the id.\n"); + ladmin_log("Negative value was given to found the account." RETCODE); + } + return 136; + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le information d'un compte (par l'id)." RETCODE); + } else { + ladmin_log("Request to login-server to obtain information about an account (by its id)." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7954; + WFIFOL(login_fd,2) = account_id; + WFIFOSET(login_fd,6); + bytes_to_read = 1; + + return 0; +} + +//--------------------------------------- +// Sub-function: Send a broadcast message +//--------------------------------------- +int sendbroadcast(short type, char* message) { + if (strlen(message) == 0) { + if (defaultlanguage == 'F') { + printf("Entrez un message svp.\n"); + if (type == 0) { + printf("<exemple> kami un message\n"); + } else { + printf("<exemple> kamib un message\n"); + } + ladmin_log("Le message est vide (commande 'kami(b)')." RETCODE); + } else { + printf("Please input a message.\n"); + if (type == 0) { + printf("<example> kami a message\n"); + } else { + printf("<example> kamib a message\n"); + } + ladmin_log("The message is void ('kami(b)' command)." RETCODE); + } + return 136; + } + + WFIFOW(login_fd,0) = 0x794e; + WFIFOW(login_fd,2) = type; + WFIFOL(login_fd,4) = strlen(message)+1; + memcpy(WFIFOP(login_fd,8), message, strlen(message)+1); + WFIFOSET(login_fd,8+strlen(message)+1); + bytes_to_read = 1; + + return 0; +} + +//-------------------------------------------- +// Sub-function: Change language of displaying +//-------------------------------------------- +int changelanguage(char* language) { + if (strlen(language) == 0) { + if (defaultlanguage == 'F') { + printf("Entrez une langue svp.\n"); + printf("<exemple> language english\n"); + printf(" language français\n"); + ladmin_log("La langue est vide (commande 'language')." RETCODE); + } else { + printf("Please input a language.\n"); + printf("<example> language english\n"); + printf(" language français\n"); + ladmin_log("The language is void ('language' command)." RETCODE); + } + return 136; + } + + language[0] = toupper(language[0]); + if (language[0] == 'F' || language[0] == 'E') { + defaultlanguage = language[0]; + if (defaultlanguage == 'F') { + printf("Changement de la langue d'affichage en Français.\n"); + ladmin_log("Changement de la langue d'affichage en Français." RETCODE); + } else { + printf("Displaying language changed to English.\n"); + ladmin_log("Displaying language changed to English." RETCODE); + } + } else { + if (defaultlanguage == 'F') { + printf("Langue non paramétrée (langues possibles: 'Français' ou 'English').\n"); + ladmin_log("Langue non paramétrée (Français ou English nécessaire)." RETCODE); + } else { + printf("Undefined language (possible languages: Français or English).\n"); + ladmin_log("Undefined language (must be Français or English)." RETCODE); + } + } + + return 0; +} + +//-------------------------------------------------------- +// Sub-function: Asking to Displaying of the accounts list +//-------------------------------------------------------- +int listaccount(char* param, int type) { +//int list_first, list_last, list_type; // parameter to display a list of accounts + int i; + + list_type = type; + + // set default values + list_first = 0; + list_last = 0; + + if (list_type == 1) { // if listgm + // get all accounts = use default + } else if (list_type == 2) { // if search + for (i = 0; param[i]; i++) + param[i] = tolower(param[i]); + // get all accounts = use default + } else if (list_type == 3) { // if listban + // get all accounts = use default + } else if (list_type == 4) { // if listok + // get all accounts = use default + } else { // if list (list_type == 0) + switch(sscanf(param, "%d %d", &list_first, &list_last)) { + case 0: + // get all accounts = use default + break; + case 1: + list_last = 0; + // use tests of the following value + default: + if (list_first < 0) + list_first = 0; + if (list_last < list_first || list_last < 0) + list_last = 0; + break; + } + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour obtenir la liste des comptes de %d à %d." RETCODE, list_first, list_last); + } else { + ladmin_log("Request to login-server to obtain the list of accounts from %d to %d." RETCODE, list_first, list_last); + } + + WFIFOW(login_fd,0) = 0x7920; + WFIFOL(login_fd,2) = list_first; + WFIFOL(login_fd,6) = list_last; + WFIFOSET(login_fd,10); + bytes_to_read = 1; + + // 0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567 + if (defaultlanguage == 'F') { + printf(" id_compte GM nom_utilisateur sexe count statut\n"); + } else { + printf("account_id GM user_name sex count state\n"); + } + printf("-------------------------------------------------------------------------------\n"); + list_count = 0; + + return 0; +} + +//-------------------------------------------- +// Sub-function: Asking to modify a memo field +//-------------------------------------------- +int changememo(char* param) { + char name[1023], memo[1023]; + + memset(name, '\0', sizeof(name)); + memset(memo, '\0', sizeof(memo)); + + if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, memo) < 1 && // memo can be void + sscanf(param, "'%[^']' %[^\r\n]", name, memo) < 1 && // memo can be void + sscanf(param, "%s %[^\r\n]", name, memo) < 1) { // memo can be void + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte et un mémo svp.\n"); + printf("<exemple> memo nomtest nouveau memo\n"); + ladmin_log("Nombre incorrect de paramètres pour changer le mémo d'un compte (commande 'email')." RETCODE); + } else { + printf("Please input an account name and a memo.\n"); + printf("<example> memo testname new memo\n"); + ladmin_log("Incomplete parameters to change the memo of an account ('email' command)." RETCODE); + } + return 136; + } + + if (verify_accountname(name) == 0) { + return 102; + } + + if (strlen(memo) > 254) { + if (defaultlanguage == 'F') { + printf("Mémo trop long (%d caractères).\n", strlen(memo)); + printf("Entrez un mémo de 254 caractères maximum svp.\n"); + ladmin_log("Mémo trop long (%d caractères). Entrez un mémo de 254 caractères maximum svp." RETCODE, strlen(memo)); + } else { + printf("Memo is too long (%d characters).\n", strlen(memo)); + printf("Please input a memo of 254 bytes at the maximum.\n"); + ladmin_log("Email is too long (%d characters). Please input a memo of 254 bytes at the maximum." RETCODE, strlen(memo)); + } + return 102; + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour changer un mémo." RETCODE); + } else { + ladmin_log("Request to login-server to change a memo." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7942; + memcpy(WFIFOP(login_fd,2), name, 24); + WFIFOW(login_fd,26) = strlen(memo); + if (strlen(memo) > 0) + memcpy(WFIFOP(login_fd,28), memo, strlen(memo)); + WFIFOSET(login_fd,28+strlen(memo)); + bytes_to_read = 1; + + return 0; +} + +//----------------------------------------------- +// Sub-function: Asking to obtain an account name +//----------------------------------------------- +int nameaccount(int id) { + if (id < 0) { + if (defaultlanguage == 'F') { + printf("Entrez un id ayant une valeur positive svp.\n"); + ladmin_log("Id négatif donné pour rechecher le nom d'un compte (commande 'name')." RETCODE); + } else { + printf("Please input a positive value for the id.\n"); + ladmin_log("Negativ id given to search an account name ('name' command)." RETCODE); + } + return 136; + } + + if (defaultlanguage == 'F') + ladmin_log("Envoi d'un requête au serveur de logins pour connaître le nom d'un compte." RETCODE); + else + ladmin_log("Request to login-server to know an account name." RETCODE); + + WFIFOW(login_fd,0) = 0x7946; + WFIFOL(login_fd,2) = id; + WFIFOSET(login_fd,6); + bytes_to_read = 1; + + return 0; +} + +//------------------------------------------ +// Sub-function: Asking to modify a password +// (Note: never send back a password with login-server!! security of passwords) +//------------------------------------------ +int changepasswd(char* param) { + char name[1023], password[1023]; + + memset(name, '\0', sizeof(name)); + memset(password, '\0', sizeof(password)); + + if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 && + sscanf(param, "'%[^']' %[^\r\n]", name, password) < 1 && + sscanf(param, "%s %[^\r\n]", name, password) < 1) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte svp.\n"); + printf("<exemple> passwd nomtest nouveaumotdepasse\n"); + ladmin_log("Nombre incorrect de paramètres pour changer le mot d'un passe d'un compte (commande 'password')." RETCODE); + } else { + printf("Please input an account name.\n"); + printf("<example> passwd testname newpassword\n"); + ladmin_log("Incomplete parameters to change the password of an account ('password' command)." RETCODE); + } + return 136; + } + + if (verify_accountname(name) == 0) { + return 102; + } + + if (strlen(password) == 0) { + if (typepasswd(password) == 0) + return 134; + } + if (verify_password(password) == 0) + return 131; + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour changer un mot de passe." RETCODE); + } else { + ladmin_log("Request to login-server to change a password." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7934; + memcpy(WFIFOP(login_fd,2), name, 24); + memcpy(WFIFOP(login_fd,26), password, 24); + WFIFOSET(login_fd,50); + bytes_to_read = 1; + + return 0; +} + +//---------------------------------------------------------------------- +// Sub-function: Request to login-server to reload GM configuration file +// this function have no answer +//---------------------------------------------------------------------- +int reloadGM() { + WFIFOW(login_fd,0) = 0x7955; + WFIFOSET(login_fd,2); + bytes_to_read = 0; + + if (defaultlanguage == 'F') { + ladmin_log("Demande de recharger le fichier de configuration des GM envoyée." RETCODE); + printf("Demande de recharger le fichier de configuration des GM envoyée.\n"); + printf("Vérifiez les comptes GM actuels (après rechargement):\n"); + } else { + ladmin_log("Request to reload the GM configuration file sended." RETCODE); + printf("Request to reload the GM configuration file sended.\n"); + printf("Check the actual GM accounts (after reloading):\n"); + } + listaccount(parameters, 1); // 1: to list only GM + + return 180; +} + +//----------------------------------------------------- +// Sub-function: Asking to modify the sex of an account +//----------------------------------------------------- +int changesex(char* param) { + char name[1023], sex[1023]; + + memset(name, '\0', sizeof(name)); + memset(sex, '\0', sizeof(sex)); + + if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, sex) < 2 && + sscanf(param, "'%[^']' %[^\r\n]", name, sex) < 2 && + sscanf(param, "%s %[^\r\n]", name, sex) < 2) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte et un sexe svp.\n"); + printf("<exemple> sex nomtest Male\n"); + ladmin_log("Nombre incorrect de paramètres pour changer le sexe d'un compte (commande 'sex')." RETCODE); + } else { + printf("Please input an account name and a sex.\n"); + printf("<example> sex testname Male\n"); + ladmin_log("Incomplete parameters to change the sex of an account ('sex' command)." RETCODE); + } + return 136; + } + + if (verify_accountname(name) == 0) { + return 102; + } + + sex[0] = toupper(sex[0]); + if (strchr("MF", sex[0]) == NULL) { + if (defaultlanguage == 'F') { + printf("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex); + ladmin_log("Sexe incorrect [%s]. Entrez M ou F svp." RETCODE, sex); + } else { + printf("Illegal gender [%s]. Please input M or F.\n", sex); + ladmin_log("Illegal gender [%s]. Please input M or F." RETCODE, sex); + } + return 103; + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour changer un sexe." RETCODE); + } else { + ladmin_log("Request to login-server to change a sex." RETCODE); + } + + WFIFOW(login_fd,0) = 0x793c; + memcpy(WFIFOP(login_fd,2), name, 24); + WFIFOB(login_fd,26) = sex[0]; + WFIFOSET(login_fd,27); + bytes_to_read = 1; + + return 0; +} + +//------------------------------------------------------------------------- +// Sub-function of sub-function changestate, blockaccount or unblockaccount +// Asking to modify the state of an account +//------------------------------------------------------------------------- +int changestatesub(char* name, int state, char* error_message7) { + char error_message[1023]; // need to use, because we can modify error_message7 + + memset(error_message, '\0', sizeof(error_message)); + strncpy(error_message, error_message7, sizeof(error_message)-1); + + if ((state < 0 || state > 9) && state != 100) { // Valid values: 0: ok, or value of the 0x006a packet + 1 + if (defaultlanguage == 'F') { + printf("Entrez une des statuts suivantes svp:\n"); + printf(" 0 = Compte ok 6 = Your Game's EXE file is not the latest version\n"); + } else { + printf("Please input one of these states:\n"); + printf(" 0 = Account ok 6 = Your Game's EXE file is not the latest version\n"); + } + printf(" 1 = Unregistered ID 7 = You are Prohibited to log in until + message\n"); + printf(" 2 = Incorrect Password 8 = Server is jammed due to over populated\n"); + printf(" 3 = This ID is expired 9 = No MSG\n"); + printf(" 4 = Rejected from Server 100 = This ID has been totally erased\n"); + printf(" 5 = You have been blocked by the GM Team\n"); + if (defaultlanguage == 'F') { + printf("<exemples> state nomtest 5\n"); + printf(" state nomtest 7 fin de votre ban\n"); + printf(" block <nom compte>\n"); + printf(" unblock <nom compte>\n"); + ladmin_log("Valeur incorrecte pour le statut d'un compte (commande 'state', 'block' ou 'unblock')." RETCODE); + } else { + printf("<examples> state testname 5\n"); + printf(" state testname 7 end of your ban\n"); + printf(" block <account name>\n"); + printf(" unblock <account name>\n"); + ladmin_log("Invalid value for the state of an account ('state', 'block' or 'unblock' command)." RETCODE); + } + return 151; + } + + if (verify_accountname(name) == 0) { + return 102; + } + + if (state != 7) { + strcpy(error_message, "-"); + } else { + if (strlen(error_message) < 1) { + if (defaultlanguage == 'F') { + printf("Message d'erreur trop court. Entrez un message de 1-19 caractères.\n"); + ladmin_log("Message d'erreur trop court. Entrez un message de 1-19 caractères." RETCODE); + } else { + printf("Error message is too short. Please input a message of 1-19 bytes.\n"); + ladmin_log("Error message is too short. Please input a message of 1-19 bytes." RETCODE); + } + return 102; + } + if (strlen(error_message) > 19) { + if (defaultlanguage == 'F') { + printf("Message d'erreur trop long. Entrez un message de 1-19 caractères.\n"); + ladmin_log("Message d'erreur trop long. Entrez un message de 1-19 caractères." RETCODE); + } else { + printf("Error message is too long. Please input a message of 1-19 bytes.\n"); + ladmin_log("Error message is too long. Please input a message of 1-19 bytes." RETCODE); + } + return 102; + } + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour changer un statut." RETCODE); + } else { + ladmin_log("Request to login-server to change a state." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7936; + memcpy(WFIFOP(login_fd,2), name, 24); + WFIFOL(login_fd,26) = state; + memcpy(WFIFOP(login_fd,30), error_message, 20); + WFIFOSET(login_fd,50); + bytes_to_read = 1; + + return 0; +} + +//------------------------------------------------------- +// Sub-function: Asking to modify the state of an account +//------------------------------------------------------- +int changestate(char* param) { + char name[1023], error_message[1023]; + int state; + + memset(name, '\0', sizeof(name)); + memset(error_message, '\0', sizeof(error_message)); + + if (sscanf(param, "\"%[^\"]\" %d %[^\r\n]", name, &state, error_message) < 2 && + sscanf(param, "'%[^']' %d %[^\r\n]", name, &state, error_message) < 2 && + sscanf(param, "%s %d %[^\r\n]", name, &state, error_message) < 2) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte et un statut svp.\n"); + printf("<exemples> state nomtest 5\n"); + printf(" state nomtest 7 fin de votre ban\n"); + printf(" block <nom compte>\n"); + printf(" unblock <nom compte>\n"); + ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'state')." RETCODE); + } else { + printf("Please input an account name and a state.\n"); + printf("<examples> state testname 5\n"); + printf(" state testname 7 end of your ban\n"); + printf(" block <account name>\n"); + printf(" unblock <account name>\n"); + ladmin_log("Incomplete parameters to change the state of an account ('state' command)." RETCODE); + } + return 136; + } + + return changestatesub(name, state, error_message); +} + +//------------------------------------------- +// Sub-function: Asking to unblock an account +//------------------------------------------- +int unblockaccount(char* param) { + char name[1023]; + + memset(name, '\0', sizeof(name)); + + if (strlen(param) == 0 || + (sscanf(param, "\"%[^\"]\"", name) < 1 && + sscanf(param, "'%[^']'", name) < 1 && + sscanf(param, "%[^\r\n]", name) < 1) || + strlen(name) == 0) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte svp.\n"); + printf("<exemples> state nomtest 5\n"); + printf(" state nomtest 7 fin de votre ban\n"); + printf(" block <nom compte>\n"); + printf(" unblock <nom compte>\n"); + ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'unblock')." RETCODE); + } else { + printf("Please input an account name.\n"); + printf("<examples> state testname 5\n"); + printf(" state testname 7 end of your ban\n"); + printf(" block <account name>\n"); + printf(" unblock <account name>\n"); + ladmin_log("Incomplete parameters to change the state of an account ('unblock' command)." RETCODE); + } + return 136; + } + + return changestatesub(name, 0, "-"); // state 0, no error message +} + +//------------------------------------------- +// Sub-function: Asking to unblock an account +//------------------------------------------- +int blockaccount(char* param) { + char name[1023]; + + memset(name, '\0', sizeof(name)); + + if (strlen(param) == 0 || + (sscanf(param, "\"%[^\"]\"", name) < 1 && + sscanf(param, "'%[^']'", name) < 1 && + sscanf(param, "%[^\r\n]", name) < 1) || + strlen(name) == 0) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte svp.\n"); + printf("<exemples> state nomtest 5\n"); + printf(" state nomtest 7 fin de votre ban\n"); + printf(" block <nom compte>\n"); + printf(" unblock <nom compte>\n"); + ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'block')." RETCODE); + } else { + printf("Please input an account name.\n"); + printf("<examples> state testname 5\n"); + printf(" state testname 7 end of your ban\n"); + printf(" block <account name>\n"); + printf(" unblock <account name>\n"); + ladmin_log("Incomplete parameters to change the state of an account ('block' command)." RETCODE); + } + return 136; + } + + return changestatesub(name, 5, "-"); // state 5, no error message +} + +//--------------------------------------------------------------------- +// Sub-function: Add/substract time to the validity limit of an account +//--------------------------------------------------------------------- +int timeaddaccount(char* param) { + char name[1023], modif[1023]; + int year, month, day, hour, minute, second; + char * p_modif; + int value, i; + + memset(name, '\0', sizeof(name)); + memset(modif, '\0', sizeof(modif)); + year = month = day = hour = minute = second = 0; + + if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 && + sscanf(param, "'%[^']' %[^\r\n]", name, modif) < 2 && + sscanf(param, "%s %[^\r\n]", name, modif) < 2) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte et un modificateur svp.\n"); + printf(" <exemple> timeadd nomtest +1m-2mn1s-6y\n"); + printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); + printf(" et 6 ans dans le même temps.\n"); + ladmin_log("Nombre incorrect de paramètres pour modifier une date limite d'utilisation (commande 'timeadd')." RETCODE); + } else { + printf("Please input an account name and a modifier.\n"); + printf(" <example>: timeadd testname +1m-2mn1s-6y\n"); + printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + printf(" and 6 years at the same time.\n"); + ladmin_log("Incomplete parameters to modify a limit time ('timeadd' command)." RETCODE); + } + return 136; + } + if (verify_accountname(name) == 0) { + return 102; + } + + // lowercase for modif + for (i = 0; modif[i]; i++) + modif[i] = tolower(modif[i]); + p_modif = modif; + while (strlen(p_modif) > 0) { + value = atoi(p_modif); + if (value == 0) { + p_modif++; + } else { + if (p_modif[0] == '-' || p_modif[0] == '+') + p_modif++; + while (strlen(p_modif) > 0 && p_modif[0] >= '0' && p_modif[0] <= '9') { + p_modif++; + } + if (p_modif[0] == 's') { + second = value; + p_modif++; + } else if (p_modif[0] == 'm' && p_modif[1] == 'n') { + minute = value; + p_modif += 2; + } else if (p_modif[0] == 'h') { + hour = value; + p_modif++; + } else if (p_modif[0] == 'd' || p_modif[0] == 'j') { + day = value; + p_modif += 2; + } else if (p_modif[0] == 'm') { + month = value; + p_modif++; + } else if (p_modif[0] == 'y' || p_modif[0] == 'a') { + year = value; + p_modif++; + } else { + p_modif++; + } + } + } + + if (defaultlanguage == 'F') { + printf(" année: %d\n", year); + printf(" mois: %d\n", month); + printf(" jour: %d\n", day); + printf(" heure: %d\n", hour); + printf(" minute: %d\n", minute); + printf(" seconde: %d\n", second); + } else { + printf(" year: %d\n", year); + printf(" month: %d\n", month); + printf(" day: %d\n", day); + printf(" hour: %d\n", hour); + printf(" minute: %d\n", minute); + printf(" second: %d\n", second); + } + + if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0 && second == 0) { + if (defaultlanguage == 'F') { + printf("Vous devez entrer un ajustement avec cette commande, svp:\n"); + printf(" Valeur d'ajustement (-1, 1, +1, etc...)\n"); + printf(" Elément modifié:\n"); + printf(" a ou y: année\n"); + printf(" m: mois\n"); + printf(" j ou d: jour\n"); + printf(" h: heure\n"); + printf(" mn: minute\n"); + printf(" s: seconde\n"); + printf(" <exemple> timeadd nomtest +1m-2mn1s-6y\n"); + printf(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); + printf(" et 6 ans dans le même temps.\n"); + ladmin_log("Aucun ajustement n'est pas un ajustement (commande 'timeadd')." RETCODE); + } else { + printf("Please give an adjustment with this command:\n"); + printf(" Adjustment value (-1, 1, +1, etc...)\n"); + printf(" Modified element:\n"); + printf(" a or y: year\n"); + printf(" m: month\n"); + printf(" j or d: day\n"); + printf(" h: hour\n"); + printf(" mn: minute\n"); + printf(" s: second\n"); + printf(" <example> timeadd testname +1m-2mn1s-6y\n"); + printf(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + printf(" and 6 years at the same time.\n"); + ladmin_log("No adjustment isn't an adjustment ('timeadd' command)." RETCODE); + } + return 137; + } + if (year > 127 || year < -127) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement d'années correct (de -127 à 127), svp.\n"); + ladmin_log("Ajustement de l'année hors norme ('timeadd' command)." RETCODE); + } else { + printf("Please give a correct adjustment for the years (from -127 to 127).\n"); + ladmin_log("Abnormal adjustement for the year ('timeadd' command)." RETCODE); + } + return 137; + } + if (month > 255 || month < -255) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement de mois correct (de -255 à 255), svp.\n"); + ladmin_log("Ajustement du mois hors norme ('timeadd' command)." RETCODE); + } else { + printf("Please give a correct adjustment for the months (from -255 to 255).\n"); + ladmin_log("Abnormal adjustement for the month ('timeadd' command)." RETCODE); + } + return 137; + } + if (day > 32767 || day < -32767) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n"); + ladmin_log("Ajustement des jours hors norme ('timeadd' command)." RETCODE); + } else { + printf("Please give a correct adjustment for the days (from -32767 to 32767).\n"); + ladmin_log("Abnormal adjustement for the days ('timeadd' command)." RETCODE); + } + return 137; + } + if (hour > 32767 || hour < -32767) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n"); + ladmin_log("Ajustement des heures hors norme ('timeadd' command)." RETCODE); + } else { + printf("Please give a correct adjustment for the hours (from -32767 to 32767).\n"); + ladmin_log("Abnormal adjustement for the hours ('timeadd' command)." RETCODE); + } + return 137; + } + if (minute > 32767 || minute < -32767) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n"); + ladmin_log("Ajustement des minutes hors norme ('timeadd' command)." RETCODE); + } else { + printf("Please give a correct adjustment for the minutes (from -32767 to 32767).\n"); + ladmin_log("Abnormal adjustement for the minutes ('timeadd' command)." RETCODE); + } + return 137; + } + if (second > 32767 || second < -32767) { + if (defaultlanguage == 'F') { + printf("Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n"); + ladmin_log("Ajustement des secondes hors norme ('timeadd' command)." RETCODE); + } else { + printf("Please give a correct adjustment for the seconds (from -32767 to 32767).\n"); + ladmin_log("Abnormal adjustement for the seconds ('timeadd' command)." RETCODE); + } + return 137; + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour modifier une date limite d'utilisation." RETCODE); + } else { + ladmin_log("Request to login-server to modify a time limit." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7950; + memcpy(WFIFOP(login_fd,2), name, 24); + WFIFOW(login_fd,26) = (short)year; + WFIFOW(login_fd,28) = (short)month; + WFIFOW(login_fd,30) = (short)day; + WFIFOW(login_fd,32) = (short)hour; + WFIFOW(login_fd,34) = (short)minute; + WFIFOW(login_fd,36) = (short)second; + WFIFOSET(login_fd,38); + bytes_to_read = 1; + + return 0; +} + +//------------------------------------------------- +// Sub-function: Set a validity limit of an account +//------------------------------------------------- +int timesetaccount(char* param) { + char name[1023], date[1023], time[1023]; + int year, month, day, hour, minute, second; + time_t connect_until_time; // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited) + struct tm *tmtime; + + memset(name, '\0', sizeof(name)); + memset(date, '\0', sizeof(date)); + memset(time, '\0', sizeof(time)); + year = month = day = hour = minute = second = 0; + connect_until_time = 0; + tmtime = localtime(&connect_until_time); // initialize + + if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void + sscanf(param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void + sscanf(param, "%s %s %[^\r\n]", name, date, time) < 2) { // if date = 0, time can be void + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte, une date et une heure svp.\n"); + printf("<exemple>: timeset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n"); + printf(" timeset <nom_du_compte> 0 (0 = illimité)\n"); + printf(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); + ladmin_log("Nombre incorrect de paramètres pour fixer une date limite d'utilisation (commande 'timeset')." RETCODE); + } else { + printf("Please input an account name, a date and a hour.\n"); + printf("<example>: timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n"); + printf(" timeset <account_name> 0 (0 = unlimited)\n"); + printf(" Default time [hh:mm:ss]: 23:59:59.\n"); + ladmin_log("Incomplete parameters to set a limit time ('timeset' command)." RETCODE); + } + return 136; + } + if (verify_accountname(name) == 0) { + return 102; + } + + if (time[0] == '\0') + strcpy(time, "23:59:59"); + + if (atoi(date) != 0 && + ((sscanf(date, "%d/%d/%d", &year, &month, &day) < 3 && + sscanf(date, "%d-%d-%d", &year, &month, &day) < 3 && + sscanf(date, "%d.%d.%d", &year, &month, &day) < 3 && + sscanf(date, "%d'%d'%d", &year, &month, &day) < 3) || + sscanf(time, "%d:%d:%d", &hour, &minute, &second) < 3)) { + if (defaultlanguage == 'F') { + printf("Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n"); + ladmin_log("Format incorrect pour la date/heure ('timeset' command)." RETCODE); + } else { + printf("Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"); + ladmin_log("Invalid format for the date/time ('timeset' command)." RETCODE); + } + return 102; + } + + if (atoi(date) == 0) { + connect_until_time = 0; + } else { + if (year < 70) { + year = year + 100; + } + if (year >= 1900) { + year = year - 1900; + } + if (month < 1 || month > 12) { + if (defaultlanguage == 'F') { + printf("Entrez un mois correct svp (entre 1 et 12).\n"); + ladmin_log("Mois incorrect pour la date ('timeset' command)." RETCODE); + } else { + printf("Please give a correct value for the month (from 1 to 12).\n"); + ladmin_log("Invalid month for the date ('timeset' command)." RETCODE); + } + return 102; + } + month = month - 1; + if (day < 1 || day > 31) { + if (defaultlanguage == 'F') { + printf("Entrez un jour correct svp (entre 1 et 31).\n"); + ladmin_log("Jour incorrect pour la date ('timeset' command)." RETCODE); + } else { + printf("Please give a correct value for the day (from 1 to 31).\n"); + ladmin_log("Invalid day for the date ('timeset' command)." RETCODE); + } + return 102; + } + if (((month == 3 || month == 5 || month == 8 || month == 10) && day > 30) || + (month == 1 && day > 29)) { + if (defaultlanguage == 'F') { + printf("Entrez un jour correct en fonction du mois (%d) svp.\n", month); + ladmin_log("Jour incorrect pour ce mois correspondant ('timeset' command)." RETCODE); + } else { + printf("Please give a correct value for a day of this month (%d).\n", month); + ladmin_log("Invalid day for this month ('timeset' command)." RETCODE); + } + return 102; + } + if (hour < 0 || hour > 23) { + if (defaultlanguage == 'F') { + printf("Entrez une heure correcte svp (entre 0 et 23).\n"); + ladmin_log("Heure incorrecte pour l'heure ('timeset' command)." RETCODE); + } else { + printf("Please give a correct value for the hour (from 0 to 23).\n"); + ladmin_log("Invalid hour for the time ('timeset' command)." RETCODE); + } + return 102; + } + if (minute < 0 || minute > 59) { + if (defaultlanguage == 'F') { + printf("Entrez des minutes correctes svp (entre 0 et 59).\n"); + ladmin_log("Minute incorrecte pour l'heure ('timeset' command)." RETCODE); + } else { + printf("Please give a correct value for the minutes (from 0 to 59).\n"); + ladmin_log("Invalid minute for the time ('timeset' command)." RETCODE); + } + return 102; + } + if (second < 0 || second > 59) { + if (defaultlanguage == 'F') { + printf("Entrez des secondes correctes svp (entre 0 et 59).\n"); + ladmin_log("Seconde incorrecte pour l'heure ('timeset' command)." RETCODE); + } else { + printf("Please give a correct value for the seconds (from 0 to 59).\n"); + ladmin_log("Invalid second for the time ('timeset' command)." RETCODE); + } + return 102; + } + tmtime->tm_year = year; + tmtime->tm_mon = month; + tmtime->tm_mday = day; + tmtime->tm_hour = hour; + tmtime->tm_min = minute; + tmtime->tm_sec = second; + tmtime->tm_isdst = -1; // -1: no winter/summer time modification + connect_until_time = mktime(tmtime); + if (connect_until_time == -1) { + if (defaultlanguage == 'F') { + printf("Date incorrecte.\n"); + printf("Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n"); + ladmin_log("Date incorrecte. ('timeset' command)." RETCODE); + } else { + printf("Invalid date.\n"); + printf("Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"); + ladmin_log("Invalid date. ('timeset' command)." RETCODE); + } + return 102; + } + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour fixer une date limite d'utilisation." RETCODE); + } else { + ladmin_log("Request to login-server to set a time limit." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7948; + memcpy(WFIFOP(login_fd,2), name, 24); + WFIFOL(login_fd,26) = (int)connect_until_time; + WFIFOSET(login_fd,30); + bytes_to_read = 1; + + return 0; +} + +//------------------------------------------------------------------------------ +// Sub-function: Asking to displaying information about an account (by its name) +//------------------------------------------------------------------------------ +int whoaccount(char* param) { + char name[1023]; + + memset(name, '\0', sizeof(name)); + + if (strlen(param) == 0 || + (sscanf(param, "\"%[^\"]\"", name) < 1 && + sscanf(param, "'%[^']'", name) < 1 && + sscanf(param, "%[^\r\n]", name) < 1) || + strlen(name) == 0) { + if (defaultlanguage == 'F') { + printf("Entrez un nom de compte svp.\n"); + printf("<exemple> who nomtest\n"); + ladmin_log("Aucun nom n'a été donné pour trouver le compte." RETCODE); + } else { + printf("Please input an account name.\n"); + printf("<example> who testname\n"); + ladmin_log("No name was given to found the account." RETCODE); + } + return 136; + } + if (verify_accountname(name) == 0) { + return 102; + } + + if (defaultlanguage == 'F') { + ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le information d'un compte (par le nom)." RETCODE); + } else { + ladmin_log("Request to login-server to obtain information about an account (by its name)." RETCODE); + } + + WFIFOW(login_fd,0) = 0x7952; + memcpy(WFIFOP(login_fd,2), name, 24); + WFIFOSET(login_fd,26); + bytes_to_read = 1; + + return 0; +} + +//-------------------------------------------------------- +// Sub-function: Asking of the version of the login-server +//-------------------------------------------------------- +int checkloginversion() { + if (defaultlanguage == 'F') + ladmin_log("Envoi d'un requête au serveur de logins pour obtenir sa version." RETCODE); + else + ladmin_log("Request to login-server to obtain its version." RETCODE); + + WFIFOW(login_fd,0) = 0x7530; + WFIFOSET(login_fd,2); + bytes_to_read = 1; + + return 0; +} + +//--------------------------------------------- +// Prompt function +// this function wait until user type a command +// and analyse the command. +//--------------------------------------------- +int prompt() { + int i, j; + char buf[1024]; + char *p; + + // while we don't wait new packets + while (bytes_to_read == 0) { + // for help with the console colors look here: + // http://www.edoceo.com/liberum/?doc=printf-with-color + // some code explanation (used here): + // \033[2J : clear screen and go up/left (0, 0 position) + // \033[K : clear line from actual position to end of the line + // \033[0m : reset color parameter + // \033[1m : use bold for font + printf("\n"); + if (defaultlanguage == 'F') + printf("\033[32mPour afficher les commandes, tapez 'Entrée'.\033[0m\n"); + else + printf("\033[32mTo list the commands, type 'enter'.\033[0m\n"); + printf("\033[0;36mLadmin-> \033[0m"); + printf("\033[1m"); + fflush(stdout); + + // get command and parameter + memset(buf, '\0', sizeof(buf)); + fflush(stdin); + fgets(buf, 1023, stdin); + buf[1023] = '\0'; + + printf("\033[0m"); + fflush(stdout); + + // remove final \n + if((p = strrchr(buf, '\n')) != NULL) + p[0] = '\0'; + // remove all control char + for (i = 0; buf[i]; i++) + if (buf[i] < 32) { + // remove cursor control. + if (buf[i] == 27 && buf[i+1] == '[' && + (buf[i+2] == 'H' || // home position (cursor) + buf[i+2] == 'J' || // clear screen + buf[i+2] == 'A' || // up 1 line + buf[i+2] == 'B' || // down 1 line + buf[i+2] == 'C' || // right 1 position + buf[i+2] == 'D' || // left 1 position + buf[i+2] == 'G')) { // center cursor (windows) + for (j = i; buf[j]; j++) + buf[j] = buf[j+3]; + } else if (buf[i] == 27 && buf[i+1] == '[' && buf[i+2] == '2' && buf[i+3] == 'J') { // clear screen + for (j = i; buf[j]; j++) + buf[j] = buf[j+4]; + } else if (buf[i] == 27 && buf[i+1] == '[' && buf[i+3] == '~' && + (buf[i+2] == '1' || // home (windows) + buf[i+2] == '2' || // insert (windows) + buf[i+2] == '3' || // del (windows) + buf[i+2] == '4' || // end (windows) + buf[i+2] == '5' || // pgup (windows) + buf[i+2] == '6')) { // pgdown (windows) + for (j = i; buf[j]; j++) + buf[j] = buf[j+4]; + } else { + // remove other control char. + for (j = i; buf[j]; j++) + buf[j] = buf[j+1]; + } + i--; + } + + // extract command name and parameters + memset(command, '\0', sizeof(command)); + memset(parameters, '\0', sizeof(parameters)); + sscanf(buf, "%1023s %[^\n]", command, parameters); + command[1023] = '\0'; + parameters[1023] = '\0'; + + // lowercase for command line + for (i = 0; command[i]; i++) + command[i] = tolower(command[i]); + + if (command[0] == '?' || strlen(command) == 0) { + if (defaultlanguage == 'F') { + strcpy(buf, "aide"); + strcpy(command, "aide"); + } else { + strcpy(buf, "help"); + strcpy(command, "help"); + } + } + + // Analyse of the command + check_command(command); // give complete name to the command + + if (strlen(parameters) == 0) { + if (defaultlanguage == 'F') { + ladmin_log("Commande: '%s' (sans paramètre)" RETCODE, command, parameters); + } else { + ladmin_log("Command: '%s' (without parameters)" RETCODE, command, parameters); + } + } else { + if (defaultlanguage == 'F') { + ladmin_log("Commande: '%s', paramètres: '%s'" RETCODE, command, parameters); + } else { + ladmin_log("Command: '%s', parameters: '%s'" RETCODE, command, parameters); + } + } + + // Analyse of the command +// help + if (strcmp(command, "aide") == 0) { + display_help(parameters, 1); // 1: french + } else if (strcmp(command, "help") == 0 ) { + display_help(parameters, 0); // 0: english +// general commands + } else if (strcmp(command, "add") == 0) { + addaccount(parameters, 0); // 0: no email + } else if (strcmp(command, "ban") == 0) { + banaccount(parameters); + } else if (strcmp(command, "banadd") == 0) { + banaddaccount(parameters); + } else if (strcmp(command, "banset") == 0) { + bansetaccount(parameters); + } else if (strcmp(command, "block") == 0) { + blockaccount(parameters); + } else if (strcmp(command, "check") == 0) { + checkaccount(parameters); + } else if (strcmp(command, "create") == 0) { + addaccount(parameters, 1); // 1: with email + } else if (strcmp(command, "delete") == 0) { + delaccount(parameters); + } else if (strcmp(command, "email") == 0) { + changeemail(parameters); + } else if (strcmp(command, "getcount") == 0) { + getlogincount(); + } else if (strcmp(command, "gm") == 0) { + changegmlevel(parameters); + } else if (strcmp(command, "id") == 0) { + idaccount(parameters); + } else if (strcmp(command, "info") == 0) { + infoaccount(atoi(parameters)); + } else if (strcmp(command, "kami") == 0) { + sendbroadcast(0, parameters); // flag for normal + } else if (strcmp(command, "kamib") == 0) { + sendbroadcast(0x10, parameters); // flag for blue + } else if (strcmp(command, "language") == 0) { + changelanguage(parameters); + } else if (strcmp(command, "list") == 0) { + listaccount(parameters, 0); // 0: to list all + } else if (strcmp(command, "listban") == 0) { + listaccount(parameters, 3); // 3: to list only accounts with state or bannished + } else if (strcmp(command, "listgm") == 0) { + listaccount(parameters, 1); // 1: to list only GM + } else if (strcmp(command, "listok") == 0) { + listaccount(parameters, 4); // 4: to list only accounts without state and not bannished + } else if (strcmp(command, "memo") == 0) { + changememo(parameters); + } else if (strcmp(command, "name") == 0) { + nameaccount(atoi(parameters)); + } else if (strcmp(command, "password") == 0) { + changepasswd(parameters); + } else if (strcmp(command, "reloadgm") == 0) { + reloadGM(); + } else if (strcmp(command, "search") == 0) { // no regex in C version + listaccount(parameters, 2); // 2: to list with pattern + } else if (strcmp(command, "sex") == 0) { + changesex(parameters); + } else if (strcmp(command, "state") == 0) { + changestate(parameters); + } else if (strcmp(command, "timeadd") == 0) { + timeaddaccount(parameters); + } else if (strcmp(command, "timeset") == 0) { + timesetaccount(parameters); + } else if (strcmp(command, "unban") == 0) { + unbanaccount(parameters); + } else if (strcmp(command, "unblock") == 0) { + unblockaccount(parameters); + } else if (strcmp(command, "version") == 0) { + checkloginversion(); + } else if (strcmp(command, "who") == 0) { + whoaccount(parameters); +// quit + } else if (strcmp(command, "quit") == 0 || + strcmp(command, "exit") == 0 || + strcmp(command, "end") == 0) { + if (defaultlanguage == 'F') { + printf("Au revoir.\n"); + } else { + printf("Bye.\n"); + } + exit(0); +// unknown command + } else { + if (defaultlanguage == 'F') { + printf("Commande inconnue [%s].\n", buf); + ladmin_log("Commande inconnue [%s]." RETCODE, buf); + } else { + printf("Unknown command [%s].\n", buf); + ladmin_log("Unknown command [%s]." RETCODE, buf); + } + } + } + + return 0; +} + +//------------------------------------------------------------- +// Function: Parse receiving informations from the login-server +//------------------------------------------------------------- +int parse_fromlogin(int fd) { + struct char_session_data *sd; + + if (session[fd]->eof) { + if (defaultlanguage == 'F') { + printf("Impossible de se connecter au serveur de login [%s:%d] !\n", loginserverip, loginserverport); + ladmin_log("Impossible de se connecter au serveur de login [%s:%d] !" RETCODE, loginserverip, loginserverport); + } else { + printf("Impossible to have a connection with the login-server [%s:%d] !\n", loginserverip, loginserverport); + ladmin_log("Impossible to have a connection with the login-server [%s:%d] !" RETCODE, loginserverip, loginserverport); + } + close(fd); + delete_session(fd); + exit (0); + } + +// printf("parse_fromlogin : %d %d %d\n", fd, RFIFOREST(fd), RFIFOW(fd,0)); + sd = session[fd]->session_data; + + while(RFIFOREST(fd) >= 2) { + switch(RFIFOW(fd,0)) { + case 0x7919: // answer of a connection request + if (RFIFOREST(fd) < 3) + return 0; + if (RFIFOB(fd,2) != 0) { + if (defaultlanguage == 'F') { + printf("Erreur de login:\n"); + printf(" - mot de passe incorrect,\n"); + printf(" - système d'administration non activé, ou\n"); + printf(" - IP non autorisée.\n"); + ladmin_log("Erreur de login: mot de passe incorrect, système d'administration non activé, ou IP non autorisée." RETCODE); + } else { + printf("Error at login:\n"); + printf(" - incorrect password,\n"); + printf(" - administration system not activated, or\n"); + printf(" - unauthorised IP.\n"); + ladmin_log("Error at login: incorrect password, administration system not activated, or unauthorised IP." RETCODE); + } + session[fd]->eof = 1; + //bytes_to_read = 1; // not stop at prompt + } else { + if (defaultlanguage == 'F') { + printf("Connexion établie.\n"); + ladmin_log("Connexion établie." RETCODE); + printf("Lecture de la version du serveur de login...\n"); + ladmin_log("Lecture de la version du serveur de login..." RETCODE); + } else { + printf("Established connection.\n"); + ladmin_log("Established connection." RETCODE); + printf("Reading of the version of the login-server...\n"); + ladmin_log("Reading of the version of the login-server..." RETCODE); + } + //bytes_to_read = 1; // unchanged + checkloginversion(); + } + RFIFOSKIP(fd,3); + break; + +#ifdef PASSWORDENC + case 0x01dc: // answer of a coding key request + if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2)) + return 0; + { + char md5str[64] = "", md5bin[32], md5key[RFIFOW(fd,2) - 4 + 1]; + memcpy(md5key, RFIFOP(fd,4), RFIFOW(fd,2) - 4); + md5key[sizeof(md5key)-1] = '0'; + if (passenc == 1) { + strncpy(md5str, RFIFOP(fd,4), RFIFOW(fd,2) - 4); + strcat(md5str, loginserveradminpassword); + } else if (passenc == 2) { + strncpy(md5str, loginserveradminpassword, sizeof(loginserveradminpassword)); + strcat(md5str, RFIFOP(fd,4)); + } + MD5_String2binary(md5str, md5bin); + WFIFOW(login_fd,0) = 0x7918; // Request for administation login (encrypted password) + WFIFOW(login_fd,2) = passenc; // Encrypted type + memcpy(WFIFOP(login_fd,4), md5bin, 16); + WFIFOSET(login_fd,20); + if (defaultlanguage == 'F') { + printf("Réception de la clef MD5.\n"); + ladmin_log("Réception de la clef MD5." RETCODE); + printf("Envoi du mot de passe crypté...\n"); + ladmin_log("Envoi du mot de passe crypté..." RETCODE); + } else { + printf("Receiving of the MD5 key.\n"); + ladmin_log("Receiving of the MD5 key." RETCODE); + printf("Sending of the encrypted password...\n"); + ladmin_log("Sending of the encrypted password..." RETCODE); + } + } + bytes_to_read = 1; + RFIFOSKIP(fd,RFIFOW(fd,2)); + break; +#endif + + case 0x7531: // Displaying of the version of the login-server + if (RFIFOREST(fd) < 10) + return 0; + printf(" Login-Server [%s:%d]\n", loginserverip, loginserverport); + if (((int)RFIFOB(login_fd,5)) == 0) { + printf(" eAthena version stable-%d.%d", (int)RFIFOB(login_fd,2), (int)RFIFOB(login_fd,3)); + } else { + printf(" eAthena version dev-%d.%d", (int)RFIFOB(login_fd,2), (int)RFIFOB(login_fd,3)); + } + if (((int)RFIFOB(login_fd,4)) == 0) + printf(" revision %d", (int)RFIFOB(login_fd,4)); + if (((int)RFIFOB(login_fd,6)) == 0) + printf("%d.\n", RFIFOW(login_fd,8)); + else + printf("-mod%d.\n", RFIFOW(login_fd,8)); + bytes_to_read = 0; + RFIFOSKIP(fd,10); + break; + + case 0x7921: // Displaying of the list of accounts + if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2)) + return 0; + if (RFIFOW(fd,2) < 5) { + if (defaultlanguage == 'F') { + ladmin_log(" Réception d'une liste des comptes vide." RETCODE); + if (list_count == 0) + printf("Aucun compte trouvé.\n"); + else if (list_count == 1) + printf("1 compte trouvé.\n"); + else + printf("%d comptes trouvés.\n", list_count); + } else { + ladmin_log(" Receiving of a void accounts list." RETCODE); + if (list_count == 0) + printf("No account found.\n"); + else if (list_count == 1) + printf("1 account found.\n"); + else + printf("%d accounts found.\n", list_count); + } + bytes_to_read = 0; + } else { + int i; + if (defaultlanguage == 'F') + ladmin_log(" Réception d'une liste des comptes." RETCODE); + else + ladmin_log(" Receiving of a accounts list." RETCODE); + for(i = 4; i < RFIFOW(fd,2); i += 38) { + int j; + char userid[24]; + char lower_userid[24]; + memcpy(userid, RFIFOP(fd,i + 5), sizeof(userid)); + userid[sizeof(userid)-1] = '\0'; + memset(lower_userid, '\0', sizeof(lower_userid)); + for (j = 0; userid[j]; j++) + lower_userid[j] = tolower(userid[j]); + list_first = RFIFOL(fd,i) + 1; + // here are checks... + if (list_type == 0 || + (list_type == 1 && RFIFOB(fd,i+4) > 0) || + (list_type == 2 && strstr(lower_userid, parameters) != NULL) || + (list_type == 3 && RFIFOL(fd,i+34) != 0) || + (list_type == 4 && RFIFOL(fd,i+34) == 0)) { + printf("%10d ", RFIFOL(fd,i)); + if (RFIFOB(fd,i+4) == 0) + printf(" "); + else + printf("%2d ", (int)RFIFOB(fd,i+4)); + printf("%-24s", userid); + if (defaultlanguage == 'F') { + if (RFIFOB(fd,i+29) == 0) + printf("%-5s ", "Femme"); + else if (RFIFOB(fd,i+29) == 1) + printf("%-5s ", "Male"); + else + printf("%-5s ", "Servr"); + } else { + if (RFIFOB(fd,i+29) == 0) + printf("%-5s ", "Femal"); + else if (RFIFOB(fd,i+29) == 1) + printf("%-5s ", "Male"); + else + printf("%-5s ", "Servr"); + } + printf("%6d ", RFIFOL(fd,i+30)); + switch(RFIFOL(fd,i+34)) { + case 0: + if (defaultlanguage == 'F') + printf("%-27s\n", "Compte Ok"); + else + printf("%-27s\n", "Account OK"); + break; + case 1: + printf("%-27s\n", "Unregistered ID"); + break; + case 2: + printf("%-27s\n", "Incorrect Password"); + break; + case 3: + printf("%-27s\n", "This ID is expired"); + break; + case 4: + printf("%-27s\n", "Rejected from Server"); + break; + case 5: + printf("%-27s\n", "Blocked by the GM Team"); // You have been blocked by the GM Team + break; + case 6: + printf("%-27s\n", "Your EXE file is too old"); // Your Game's EXE file is not the latest version + break; + case 7: + printf("%-27s\n", "Banishement or"); + printf(" Prohibited to login until...\n"); // You are Prohibited to log in until %s + break; + case 8: + printf("%-27s\n", "Server is over populated"); + break; + case 9: + printf("%-27s\n", "No MSG"); + break; + default: // 100 + printf("%-27s\n", "This ID is totally erased"); // This ID has been totally erased + break; + } + list_count++; + } + } + // asking of the following acounts + if (defaultlanguage == 'F') + ladmin_log("Envoi d'un requête au serveur de logins pour obtenir la liste des comptes de %d à %d (complément)." RETCODE, list_first, list_last); + else + ladmin_log("Request to login-server to obtain the list of accounts from %d to %d (complement)." RETCODE, list_first, list_last); + WFIFOW(login_fd,0) = 0x7920; + WFIFOL(login_fd,2) = list_first; + WFIFOL(login_fd,6) = list_last; + WFIFOSET(login_fd,10); + bytes_to_read = 1; + } + RFIFOSKIP(fd,RFIFOW(fd,2)); + break; + + case 0x7931: // Answer of login-server about an account creation + if (RFIFOREST(fd) < 30) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec à la création du compte [%s]. Un compte identique existe déjà.\n", RFIFOP(fd,6)); + ladmin_log("Echec à la création du compte [%s]. Un compte identique existe déjà." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] creation failed. Same account already exists.\n", RFIFOP(fd,6)); + ladmin_log("Account [%s] creation failed. Same account already exists." RETCODE, RFIFOP(fd,6)); + } + } else { + if (defaultlanguage == 'F') { + printf("Compte [%s] créé avec succès [id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Compte [%s] créé avec succès [id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("Account [%s] is successfully created [id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Account [%s] is successfully created [id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,30); + break; + + case 0x7933: // Answer of login-server about an account deletion + if (RFIFOREST(fd) < 30) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec de la suppression du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); + ladmin_log("Echec de la suppression du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] deletion failed. Account doesn't exist.\n", RFIFOP(fd,6)); + ladmin_log("Account [%s] deletion failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); + } + } else { + if (defaultlanguage == 'F') { + printf("Compte [%s][id: %d] SUPPRIME avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Compte [%s][id: %d] SUPPRIME avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("Account [%s][id: %d] is successfully DELETED.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Account [%s][id: %d] is successfully DELETED." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,30); + break; + + case 0x7935: // answer of the change of an account password + if (RFIFOREST(fd) < 30) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec de la modification du mot de passe du compte [%s].\n", RFIFOP(fd,6)); + printf("Le compte [%s] n'existe pas.\n", RFIFOP(fd,6)); + ladmin_log("Echec de la modification du mot de passe du compte. Le compte [%s] n'existe pas." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] password changing failed.\n", RFIFOP(fd,6)); + printf("Account [%s] doesn't exist.\n", RFIFOP(fd,6)); + ladmin_log("Account password changing failed. The compte [%s] doesn't exist." RETCODE, RFIFOP(fd,6)); + } + } else { + if (defaultlanguage == 'F') { + printf("Modification du mot de passe du compte [%s][id: %d] réussie.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Modification du mot de passe du compte [%s][id: %d] réussie." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("Account [%s][id: %d] password successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Account [%s][id: %d] password successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,30); + break; + + case 0x7937: // answer of the change of an account state + if (RFIFOREST(fd) < 34) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec du changement du statut du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); + ladmin_log("Echec du changement du statut du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] state changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); + ladmin_log("Account [%s] state changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); + } + } else { + char tmpstr[256]; + if (defaultlanguage == 'F') { + sprintf(tmpstr, "Statut du compte [%s] changé avec succès en [", RFIFOP(fd,6)); + } else { + sprintf(tmpstr, "Account [%s] state successfully changed in [", RFIFOP(fd,6)); + } + switch(RFIFOL(fd,30)) { + case 0: + if (defaultlanguage == 'F') + strcat(tmpstr, "0: Compte Ok"); + else + strcat(tmpstr, "0: Account OK"); + break; + case 1: + strcat(tmpstr, "1: Unregistered ID"); + break; + case 2: + strcat(tmpstr, "2: Incorrect Password"); + break; + case 3: + strcat(tmpstr, "3: This ID is expired"); + break; + case 4: + strcat(tmpstr, "4: Rejected from Server"); + break; + case 5: + strcat(tmpstr, "5: You have been blocked by the GM Team"); + break; + case 6: + strcat(tmpstr, "6: [Your Game's EXE file is not the latest version"); + break; + case 7: + strcat(tmpstr, "7: You are Prohibited to log in until..."); + break; + case 8: + strcat(tmpstr, "8: Server is jammed due to over populated"); + break; + case 9: + strcat(tmpstr, "9: No MSG"); + break; + default: // 100 + strcat(tmpstr, "100: This ID is totally erased"); + break; + } + strcat(tmpstr, "]"); + printf("%s\n", tmpstr); + ladmin_log("%s%s", tmpstr, RETCODE); + } + bytes_to_read = 0; + RFIFOSKIP(fd,34); + break; + + case 0x7939: // answer of the number of online players + if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2)) + return 0; + { + // Get length of the received packet + int i; + char name[20]; + if (defaultlanguage == 'F') { + ladmin_log(" Réception du nombre de joueurs en ligne." RETCODE); + } else { + ladmin_log(" Receiving of the number of online players." RETCODE); + } + // Read information of the servers + if (RFIFOW(fd,2) < 5) { + if (defaultlanguage == 'F') { + printf(" Aucun serveur n'est connecté au login serveur.\n"); + } else { + printf(" No server is connected to the login-server.\n"); + } + } else { + if (defaultlanguage == 'F') { + printf(" Nombre de joueurs en ligne (serveur: nb):\n"); + } else { + printf(" Number of online players (server: number).\n"); + } + // Displaying of result + for(i = 4; i < RFIFOW(fd,2); i += 32) { + memcpy(name, RFIFOP(fd,i+6), sizeof(name)); + name[sizeof(name) - 1] = '\0'; + printf(" %-20s : %5d\n", name, RFIFOW(fd,i+26)); + } + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,RFIFOW(fd,2)); + break; + + case 0x793b: // answer of the check of a password + if (RFIFOREST(fd) < 30) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Le compte [%s] n'existe pas ou le mot de passe est incorrect.\n", RFIFOP(fd,6)); + ladmin_log("Le compte [%s] n'existe pas ou le mot de passe est incorrect." RETCODE, RFIFOP(fd,6)); + } else { + printf("The account [%s] doesn't exist or the password is incorrect.\n", RFIFOP(fd,6)); + ladmin_log("The account [%s] doesn't exist or the password is incorrect." RETCODE, RFIFOP(fd,6)); + } + } else { + if (defaultlanguage == 'F') { + printf("Le mot de passe donné correspond bien au compte [%s][id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Le mot de passe donné correspond bien au compte [%s][id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("The proposed password is correct for the account [%s][id: %d].\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("The proposed password is correct for the account [%s][id: %d]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,30); + break; + + case 0x793d: // answer of the change of an account sex + if (RFIFOREST(fd) < 30) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec de la modification du sexe du compte [%s].\n", RFIFOP(fd,6)); + printf("Le compte [%s] n'existe pas ou le sexe est déjà celui demandé.\n", RFIFOP(fd,6)); + ladmin_log("Echec de la modification du sexe du compte. Le compte [%s] n'existe pas ou le sexe est déjà celui demandé." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] sex changing failed.\n", RFIFOP(fd,6)); + printf("Account [%s] doesn't exist or the sex is already the good sex.\n", RFIFOP(fd,6)); + ladmin_log("Account sex changing failed. The compte [%s] doesn't exist or the sex is already the good sex." RETCODE, RFIFOP(fd,6)); + } + } else { + if (defaultlanguage == 'F') { + printf("Sexe du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Sexe du compte [%s][id: %d] changé avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("Account [%s][id: %d] sex successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Account [%s][id: %d] sex successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,30); + break; + + case 0x793f: // answer of the change of an account GM level + if (RFIFOREST(fd) < 30) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec de la modification du niveau de GM du compte [%s].\n", RFIFOP(fd,6)); + printf("Le compte [%s] n'existe pas, le niveau de GM est déjà celui demandé\n", RFIFOP(fd,6)); + printf("ou il est impossible de modifier le fichier des comptes GM.\n"); + ladmin_log("Echec de la modification du niveau de GM du compte. Le compte [%s] n'existe pas, le niveau de GM est déjà celui demandé ou il est impossible de modifier le fichier des comptes GM." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] GM level changing failed.\n", RFIFOP(fd,6)); + printf("Account [%s] doesn't exist, the GM level is already the good GM level\n", RFIFOP(fd,6)); + printf("or it's impossible to modify the GM accounts file.\n"); + ladmin_log("Account GM level changing failed. The compte [%s] doesn't exist, the GM level is already the good sex or it's impossible to modify the GM accounts file." RETCODE, RFIFOP(fd,6)); + } + } else { + if (defaultlanguage == 'F') { + printf("Niveau de GM du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Niveau de GM du compte [%s][id: %d] changé avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("Account [%s][id: %d] GM level successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Account [%s][id: %d] GM level successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,30); + break; + + case 0x7941: // answer of the change of an account email + if (RFIFOREST(fd) < 30) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec de la modification de l'e-mail du compte [%s].\n", RFIFOP(fd,6)); + printf("Le compte [%s] n'existe pas.\n", RFIFOP(fd,6)); + ladmin_log("Echec de la modification de l'e-mail du compte. Le compte [%s] n'existe pas." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] e-mail changing failed.\n", RFIFOP(fd,6)); + printf("Account [%s] doesn't exist.\n", RFIFOP(fd,6)); + ladmin_log("Account e-mail changing failed. The compte [%s] doesn't exist." RETCODE, RFIFOP(fd,6)); + } + } else { + if (defaultlanguage == 'F') { + printf("Modification de l'e-mail du compte [%s][id: %d] réussie.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Modification de l'e-mail du compte [%s][id: %d] réussie." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("Account [%s][id: %d] e-mail successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Account [%s][id: %d] e-mail successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,30); + break; + + case 0x7943: // answer of the change of an account memo + if (RFIFOREST(fd) < 30) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec du changement du mémo du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); + ladmin_log("Echec du changement du mémo du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] memo changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); + ladmin_log("Account [%s] memo changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); + } + } else { + if (defaultlanguage == 'F') { + printf("Mémo du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Mémo du compte [%s][id: %d] changé avec succès." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("Account [%s][id: %d] memo successfully changed.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Account [%s][id: %d] memo successfully changed." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,30); + break; + + case 0x7945: // answer of an account id search + if (RFIFOREST(fd) < 30) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); + ladmin_log("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); + } else { + printf("Unable to find the account [%s] id. Account doesn't exist.\n", RFIFOP(fd,6)); + ladmin_log("Unable to find the account [%s] id. Account doesn't exist." RETCODE, RFIFOP(fd,6)); + } + } else { + if (defaultlanguage == 'F') { + printf("Le compte [%s] a pour id: %d.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Le compte [%s] a pour id: %d." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("The account [%s] have the id: %d.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("The account [%s] have the id: %d." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,30); + break; + + case 0x7947: // answer of an account name search + if (RFIFOREST(fd) < 30) + return 0; + if (strcmp(RFIFOP(fd,6), "") == 0) { + if (defaultlanguage == 'F') { + printf("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas.\n", RFIFOL(fd,2)); + ladmin_log("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas." RETCODE, RFIFOL(fd,2)); + } else { + printf("Unable to find the account [%d] name. Account doesn't exist.\n", RFIFOL(fd,2)); + ladmin_log("Unable to find the account [%d] name. Account doesn't exist." RETCODE, RFIFOL(fd,2)); + } + } else { + if (defaultlanguage == 'F') { + printf("Le compte [id: %d] a pour nom: %s.\n", RFIFOL(fd,2), RFIFOP(fd,6)); + ladmin_log("Le compte [id: %d] a pour nom: %s." RETCODE, RFIFOL(fd,2), RFIFOP(fd,6)); + } else { + printf("The account [id: %d] have the name: %s.\n", RFIFOL(fd,2), RFIFOP(fd,6)); + ladmin_log("The account [id: %d] have the name: %s." RETCODE, RFIFOL(fd,2), RFIFOP(fd,6)); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,30); + break; + + case 0x7949: // answer of an account validity limit set + if (RFIFOREST(fd) < 34) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); + ladmin_log("Echec du changement de la validité du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); + ladmin_log("Account [%s] validity limit changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); + } + } else { + time_t timestamp = RFIFOL(fd,30); + if (timestamp == 0) { + if (defaultlanguage == 'F') { + printf("Limite de validité du compte [%s][id: %d] changée avec succès en [illimité].\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès en [illimité]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited].\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } else { + char tmpstr[128]; + strftime(tmpstr, 24, date_format, localtime(×tamp)); + if (defaultlanguage == 'F') { + printf("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + } else { + printf("Validity Limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + ladmin_log("Validity Limit of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + } + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,34); + break; + + case 0x794b: // answer of an account ban set + if (RFIFOREST(fd) < 34) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); + ladmin_log("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); + ladmin_log("Account [%s] final date of banishment changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); + } + } else { + time_t timestamp = RFIFOL(fd,30); + if (timestamp == 0) { + if (defaultlanguage == 'F') { + printf("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } else { + char tmpstr[128]; + strftime(tmpstr, 24, date_format, localtime(×tamp)); + if (defaultlanguage == 'F') { + printf("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + } else { + printf("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + } + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,34); + break; + + case 0x794d: // answer of an account ban date/time changing + if (RFIFOREST(fd) < 34) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); + ladmin_log("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); + ladmin_log("Account [%s] final date of banishment changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); + } + } else { + time_t timestamp = RFIFOL(fd,30); + if (timestamp == 0) { + if (defaultlanguage == 'F') { + printf("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), RFIFOL(fd,2)); + ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished]." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } else { + char tmpstr[128]; + strftime(tmpstr, 24, date_format, localtime(×tamp)); + if (defaultlanguage == 'F') { + printf("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + } else { + printf("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + } + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,34); + break; + + case 0x794f: // answer of a broadcast + if (RFIFOREST(fd) < 4) + return 0; + if (RFIFOW(fd,2) == (unsigned short)-1) { + if (defaultlanguage == 'F') { + printf("Echec de l'envoi du message. Aucun server de char en ligne.\n"); + ladmin_log("Echec de l'envoi du message. Aucun server de char en ligne." RETCODE); + } else { + printf("Message sending failed. No online char-server.\n"); + ladmin_log("Message sending failed. No online char-server." RETCODE); + } + } else { + if (defaultlanguage == 'F') { + printf("Message transmis au server de logins avec succès.\n"); + ladmin_log("Message transmis au server de logins avec succès." RETCODE); + } else { + printf("Message successfully sended to login-server.\n"); + ladmin_log("Message successfully sended to login-server." RETCODE); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,4); + break; + + case 0x7951: // answer of an account validity limit changing + if (RFIFOREST(fd) < 34) + return 0; + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); + ladmin_log("Echec du changement de la validité du compte [%s]. Le compte n'existe pas." RETCODE, RFIFOP(fd,6)); + } else { + printf("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); + ladmin_log("Account [%s] validity limit changing failed. Account doesn't exist." RETCODE, RFIFOP(fd,6)); + } + } else { + time_t timestamp = RFIFOL(fd,30); + if (timestamp == 0) { + if (defaultlanguage == 'F') { + printf("Limite de validité du compte [%s][id: %d] inchangée.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + printf("Le compte a une validité illimitée ou\n"); + printf("la modification est impossible avec les ajustements demandés.\n"); + ladmin_log("Limite de validité du compte [%s][id: %d] inchangée. Le compte a une validité illimitée ou la modification est impossible avec les ajustements demandés." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } else { + printf("Validity limit of the account [%s][id: %d] unchanged.\n", RFIFOP(fd,6), RFIFOL(fd,2)); + printf("The account have an unlimited validity limit or\n"); + printf("the changing is impossible with the proposed adjustments.\n"); + ladmin_log("Validity limit of the account [%s][id: %d] unchanged. The account have an unlimited validity limit or the changing is impossible with the proposed adjustments." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2)); + } + } else { + char tmpstr[128]; + strftime(tmpstr, 24, date_format, localtime(×tamp)); + if (defaultlanguage == 'F') { + printf("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + } else { + printf("Validity limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + ladmin_log("Validity limit of the account [%s][id: %d] successfully changed to be until %s." RETCODE, RFIFOP(fd,6), RFIFOL(fd,2), tmpstr); + } + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,34); + break; + + case 0x7953: // answer of a request about informations of an account (by account name/id) + if (RFIFOREST(fd) < 150 || RFIFOREST(fd) < (150 + RFIFOW(fd,148))) + return 0; + { + char userid[24], error_message[20], lastlogin[24], last_ip[16], email[40], memo[255]; + time_t ban_until_time; // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban) + time_t connect_until_time; // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited) + memcpy(userid, RFIFOP(fd,7), sizeof(userid)); + userid[sizeof(userid)-1] = '\0'; + memcpy(error_message, RFIFOP(fd,40), sizeof(error_message)); + error_message[sizeof(error_message)-1] = '\0'; + memcpy(lastlogin, RFIFOP(fd,60), sizeof(lastlogin)); + lastlogin[sizeof(lastlogin)-1] = '\0'; + memcpy(last_ip, RFIFOP(fd,84), sizeof(last_ip)); + last_ip[sizeof(last_ip)-1] = '\0'; + memcpy(email, RFIFOP(fd,100), sizeof(email)); + email[sizeof(email)-1] = '\0'; + connect_until_time = (time_t)RFIFOL(fd,140); + ban_until_time = (time_t)RFIFOL(fd,144); + memset(memo, '\0', sizeof(memo)); + strncpy(memo, RFIFOP(fd,150), RFIFOW(fd,148)); + if (RFIFOL(fd,2) == -1) { + if (defaultlanguage == 'F') { + printf("Impossible de trouver le compte [%s]. Le compte n'existe pas.\n", parameters); + ladmin_log("Impossible de trouver le compte [%s]. Le compte n'existe pas." RETCODE, parameters); + } else { + printf("Unabled to find the account [%s]. Account doesn't exist.\n", parameters); + ladmin_log("Unabled to find the account [%s]. Account doesn't exist." RETCODE, parameters); + } + } else if (strlen(userid) == 0) { + if (defaultlanguage == 'F') { + printf("Impossible de trouver le compte [id: %s]. Le compte n'existe pas.\n", parameters); + ladmin_log("Impossible de trouver le compte [id: %s]. Le compte n'existe pas." RETCODE, parameters); + } else { + printf("Unabled to find the account [id: %s]. Account doesn't exist.\n", parameters); + ladmin_log("Unabled to find the account [id: %s]. Account doesn't exist." RETCODE, parameters); + } + } else { + if (defaultlanguage == 'F') { + ladmin_log("Réception d'information concernant un compte." RETCODE); + printf("Le compte a les caractéristiques suivantes:\n"); + } else { + ladmin_log("Receiving information about an account." RETCODE); + printf("The account is set with:\n"); + } + if (RFIFOB(fd,6) == 0) { + printf(" Id: %d (non-GM)\n", RFIFOL(fd,2)); + } else { + if (defaultlanguage == 'F') { + printf(" Id: %d (GM niveau %d)\n", RFIFOL(fd,2), (int)RFIFOB(fd,6)); + } else { + printf(" Id: %d (GM level %d)\n", RFIFOL(fd,2), (int)RFIFOB(fd,6)); + } + } + if (defaultlanguage == 'F') { + printf(" Nom: '%s'\n", userid); + if (RFIFOB(fd,31) == 0) + printf(" Sexe: Femme\n"); + else if (RFIFOB(fd,31) == 1) + printf(" Sexe: Male\n"); + else + printf(" Sexe: Serveur\n"); + } else { + printf(" Name: '%s'\n", userid); + if (RFIFOB(fd,31) == 0) + printf(" Sex: Female\n"); + else if (RFIFOB(fd,31) == 1) + printf(" Sex: Male\n"); + else + printf(" Sex: Server\n"); + } + printf(" E-mail: %s\n", email); + switch(RFIFOL(fd,36)) { + case 0: + if (defaultlanguage == 'F') + printf(" Statut: 0 [Compte Ok]\n"); + else + printf(" Statut: 0 [Account OK]\n"); + break; + case 1: + printf(" Statut: 1 [Unregistered ID]\n"); + break; + case 2: + printf(" Statut: 2 [Incorrect Password]\n"); + break; + case 3: + printf(" Statut: 3 [This ID is expired]\n"); + break; + case 4: + printf(" Statut: 4 [Rejected from Server]\n"); + break; + case 5: + printf(" Statut: 5 [You have been blocked by the GM Team]\n"); + break; + case 6: + printf(" Statut: 6 [Your Game's EXE file is not the latest version]\n"); + break; + case 7: + printf(" Statut: 7 [You are Prohibited to log in until %s]\n", error_message); + break; + case 8: + printf(" Statut: 8 [Server is jammed due to over populated]\n"); + break; + case 9: + printf(" Statut: 9 [No MSG]\n"); + break; + default: // 100 + printf(" Statut: %d [This ID is totally erased]\n", RFIFOL(fd,36)); + break; + } + if (defaultlanguage == 'F') { + if (ban_until_time == 0) { + printf(" Banissement: non banni.\n"); + } else { + char tmpstr[128]; + strftime(tmpstr, 24, date_format, localtime(&ban_until_time)); + printf(" Banissement: jusqu'au %s.\n", tmpstr); + } + if (RFIFOL(fd,32) > 1) + printf(" Compteur: %d connexions.\n", RFIFOL(fd,32)); + else + printf(" Compteur: %d connexion.\n", RFIFOL(fd,32)); + printf(" Dernière connexion le: %s (ip: %s)\n", lastlogin, last_ip); + if (connect_until_time == 0) { + printf(" Limite de validité: illimité.\n"); + } else { + char tmpstr[128]; + strftime(tmpstr, 24, date_format, localtime(&connect_until_time)); + printf(" Limite de validité: jusqu'au %s.\n", tmpstr); + } + } else { + if (ban_until_time == 0) { + printf(" Banishment: not banished.\n"); + } else { + char tmpstr[128]; + strftime(tmpstr, 24, date_format, localtime(&ban_until_time)); + printf(" Banishment: until %s.\n", tmpstr); + } + if (RFIFOL(fd,32) > 1) + printf(" Count: %d connections.\n", RFIFOL(fd,32)); + else + printf(" Count: %d connection.\n", RFIFOL(fd,32)); + printf(" Last connection at: %s (ip: %s)\n", lastlogin, last_ip); + if (connect_until_time == 0) { + printf(" Validity limit: unlimited.\n"); + } else { + char tmpstr[128]; + strftime(tmpstr, 24, date_format, localtime(&connect_until_time)); + printf(" Validity limit: until %s.\n", tmpstr); + } + } + printf(" Memo: '%s'\n", memo); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd,150 + RFIFOW(fd,148)); + break; + + default: + printf("Remote administration has been disconnected (unknown packet).\n"); + ladmin_log("'End of connection, unknown packet." RETCODE); + session[fd]->eof = 1; + return 0; + } + } + + // if we don't wait new packets, do the prompt + prompt(); + + return 0; +} + +//------------------------------------ +// Function to connect to login-server +//------------------------------------ +int Connect_login_server() { + if (defaultlanguage == 'F') { + printf("Essai de connection au server de logins...\n"); + ladmin_log("Essai de connection au server de logins..." RETCODE); + } else { + printf("Attempt to connect to login-server...\n"); + ladmin_log("Attempt to connect to login-server..." RETCODE); + } + + login_fd = make_connection(login_ip, loginserverport); + +#ifdef PASSWORDENC + if (passenc == 0) { +#endif + WFIFOW(login_fd,0) = 0x7918; // Request for administation login + WFIFOW(login_fd,2) = 0; // no encrypted + memcpy(WFIFOP(login_fd,4), loginserveradminpassword, 24); + WFIFOSET(login_fd,28); + bytes_to_read = 1; + if (defaultlanguage == 'F') { + printf("Envoi du mot de passe...\n"); + ladmin_log("Envoi du mot de passe..." RETCODE); + } else { + printf("Sending of the password...\n"); + ladmin_log("Sending of the password..." RETCODE); + } +#ifdef PASSWORDENC + } else { + WFIFOW(login_fd,0) = 0x791a; // Sending request about the coding key + WFIFOSET(login_fd,2); + bytes_to_read = 1; + if (defaultlanguage == 'F') { + printf("Demande de la clef MD5...\n"); + ladmin_log("Demande de la clef MD5..." RETCODE); + } else { + printf("Request about the MD5 key...\n"); + ladmin_log("Request about the MD5 key..." RETCODE); + } + } +#endif + + return 0; +} + +//------------------------------------------------- +// Return numerical value of a switch configuration +// on/off, english, français, deutsch, español +//------------------------------------------------- +int config_switch(const char *str) { + if (strcmpi(str, "on") == 0 || strcmpi(str, "yes") == 0 || strcmpi(str, "oui") == 0 || strcmpi(str, "ja") == 0 || strcmpi(str, "si") == 0) + return 1; + if (strcmpi(str, "off") == 0 || strcmpi(str, "no") == 0 || strcmpi(str, "non") == 0 || strcmpi(str, "nein") == 0) + return 0; + + return atoi(str); +} + +//----------------------------------- +// Reading general configuration file +//----------------------------------- +int ladmin_config_read(const char *cfgName) { + char line[1024], w1[1024], w2[1024]; + FILE *fp; + + fp = fopen(cfgName, "r"); + if (fp == NULL) { + if (defaultlanguage == 'F') { + printf("\033[0mFichier de configuration (%s) non trouvé.\n", cfgName); + } else { + printf("\033[0mConfiguration file (%s) not found.\n", cfgName); + } + return 1; + } + + if (defaultlanguage == 'F') { + printf("\033[0m---Début de lecture du fichier de configuration Ladmin (%s)\n", cfgName); + } else { + printf("\033[0m---Start reading of Ladmin configuration file (%s)\n", cfgName); + } + while(fgets(line, sizeof(line)-1, fp)) { + if (line[0] == '/' && line[1] == '/') + continue; + + line[sizeof(line)-1] = '\0'; + if (sscanf(line, "%[^:]: %[^\r\n]", w1, w2) == 2) { + remove_control_chars(w1); + remove_control_chars(w2); + + if(strcmpi(w1,"login_ip")==0){ + struct hostent *h = gethostbyname (w2); + if (h != NULL) { + if (defaultlanguage == 'F') { + printf("Adresse du serveur de logins: %s -> %d.%d.%d.%d\n", w2, (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]); + } else { + printf("Login server IP address: %s -> %d.%d.%d.%d\n", w2, (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]); + } + sprintf(loginserverip, "%d.%d.%d.%d", (unsigned char)h->h_addr[0], (unsigned char)h->h_addr[1], (unsigned char)h->h_addr[2], (unsigned char)h->h_addr[3]); + } else + memcpy(loginserverip, w2, 16); + } else if (strcmpi(w1, "login_port") == 0) { + loginserverport = atoi(w2); + } else if (strcmpi(w1, "admin_pass") == 0) { + strncpy(loginserveradminpassword, w2, sizeof(loginserveradminpassword)); + loginserveradminpassword[sizeof(loginserveradminpassword)-1] = '\0'; +#ifdef PASSWORDENC + } else if (strcmpi(w1, "passenc") == 0) { + passenc = atoi(w2); + if (passenc < 0 || passenc > 2) + passenc = 0; +#endif + } else if (strcmpi(w1, "defaultlanguage") == 0) { + if (w2[0] == 'F' || w2[0] == 'E') + defaultlanguage = w2[0]; + } else if (strcmpi(w1, "ladmin_log_filename") == 0) { + strncpy(ladmin_log_filename, w2, sizeof(ladmin_log_filename)); + ladmin_log_filename[sizeof(ladmin_log_filename)-1] = '\0'; + } else if (strcmpi(w1, "date_format") == 0) { // note: never have more than 19 char for the date! + switch (atoi(w2)) { + case 0: + strcpy(date_format, "%d-%m-%Y %H:%M:%S"); // 31-12-2004 23:59:59 + break; + case 1: + strcpy(date_format, "%m-%d-%Y %H:%M:%S"); // 12-31-2004 23:59:59 + break; + case 2: + strcpy(date_format, "%Y-%d-%m %H:%M:%S"); // 2004-31-12 23:59:59 + break; + case 3: + strcpy(date_format, "%Y-%m-%d %H:%M:%S"); // 2004-12-31 23:59:59 + break; + } + } else if (strcmpi(w1, "import") == 0) { + ladmin_config_read(w2); + } + } + } + fclose(fp); + + login_ip = inet_addr(loginserverip); + + if (defaultlanguage == 'F') { + printf("---Lecture du fichier de configuration Ladmin terminée.\n"); + } else { + printf("---End reading of Ladmin configuration file.\n"); + } + + return 0; +} + +//-------------------------------------- +// Function called at exit of the server +//-------------------------------------- +void do_final(void) { + + if (already_exit_function == 0) { + delete_session(login_fd); + + if (defaultlanguage == 'F') { + printf("\033[0m----Fin de Ladmin (fin normale avec fermeture de tous les fichiers).\n"); + ladmin_log("----Fin de Ladmin (fin normale avec fermeture de tous les fichiers)." RETCODE); + } else { + printf("\033[0m----End of Ladmin (normal end with closing of all files).\n"); + ladmin_log("----End of Ladmin (normal end with closing of all files)." RETCODE); + } + + already_exit_function = 1; + } +} + +//------------------------ +// Main function of ladmin +//------------------------ +int do_init(int argc, char **argv) { + // read ladmin configuration + ladmin_config_read((argc > 1) ? argv[1] : LADMIN_CONF_NAME); + + ladmin_log(""); + if (defaultlanguage == 'F') { + ladmin_log("Fichier de configuration lu." RETCODE); + } else { + ladmin_log("Configuration file readed." RETCODE); + } + + srand(time(NULL)); + + set_termfunc(do_final); + set_defaultparse(parse_fromlogin); + + if (defaultlanguage == 'F') { + printf("Outil d'administration à distance de eAthena.\n"); + printf("(pour eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION, ATHENA_MINOR_VERSION, ATHENA_REVISION); + } else { + printf("EAthena login-server administration tool.\n"); + printf("(for eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION, ATHENA_MINOR_VERSION, ATHENA_REVISION); + } + + if (defaultlanguage == 'F') { + ladmin_log("Ladmin est prêt." RETCODE); + printf("Ladmin est \033[1;32mprêt\033[0m.\n\n"); + } else { + ladmin_log("Ladmin is ready." RETCODE); + printf("Ladmin is \033[1;32mready\033[0m.\n\n"); + } + + Connect_login_server(); + + atexit(do_final); + + return 0; +} |