// Copyright (c) Athena Dev Teams - Licensed under GNU GPL // For more information, see LICENCE in the main folder /////////////////////////////////////////////////////////////////////////// // EAthena login-server remote administration tool // Ladamin in C by [Yor] // if you modify this software, modify ladmin in tool too. /////////////////////////////////////////////////////////////////////////// #include "../common/cbasetypes.h" #include "../common/core.h" #include "../common/strlib.h" #include "../common/socket.h" #include "../common/timer.h" #include "../common/version.h" #include "../common/mmo.h" #include "../common/md5calc.h" #include "../common/showmsg.h" #include "ladmin.h" #include #include #ifdef WIN32 #define WIN32_LEAN_AND_MEAN #include void Gettimeofday(struct timeval *timenow) { time_t t; t = clock(); timenow->tv_usec = t; timenow->tv_sec = t / CLK_TCK; return; } #define gettimeofday(timenow, dummy) Gettimeofday(timenow) #else #include #include #include // gettimeofday #include #include // close #include // inet_addr #include // gethostbyname #endif #include #include #include #include #include // str* #include // valist //-------------------------------INSTRUCTIONS------------------------------ // Set the variables below: // IP of the login server. // Port where the login-server listens incoming packets. // Password of administration (same of config_athena.conf). // Displayed language of the sofware (if not correct, english is used). // IMPORTANT: // Be sure that you authorize remote administration in login-server // (see login_athena.conf, 'admin_state' parameter) //------------------------------------------------------------------------- char loginserverip[16] = "127.0.0.1"; // IP of login-server int loginserverport = 6900; // Port of login-server char loginserveradminpassword[24] = "admin"; // Administration password int passenc = 0; // Encoding type of the password char defaultlanguage = 'E'; // Default language (F: Français/E: English) // (if it's not 'F', default is English) char ladmin_log_filename[1024] = "log/ladmin.log"; char date_format[32] = "%Y-%m-%d %H:%M:%S"; //------------------------------------------------------------------------- // LIST of COMMANDs that you can type at the prompt: // To use these commands you can only type only the first letters. // You must type a minimum of letters (you can not type 'a', // because ladmin doesn't know if it's for 'aide' or for 'add') // q <= quit, li <= list, pass <= passwd, etc. // // Note: every time you must give a account_name, you can use "" or '' (spaces can be included) // // aide/help/? // Display the description of the commands // aide/help/? [command] // Display the description of the specified command // // add // Create an account with the default email (a@a.com). // Concerning the sex, only the first letter is used (F or M). // The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail. // When the password is omitted, the input is done without displaying of the pressed keys. // add testname Male testpass // // ban/banish yyyy/mm/dd hh:mm:ss // Changes the final date of a banishment of an account. // Like banset, but is at end. // // banadd // Adds or substracts time from the final date of a banishment of an account. // Modifier is done as follows: // Adjustment value (-1, 1, +1, etc...) // Modified element: // a or y: year // m: month // j or d: day // h: hour // mn: minute // s: second // banadd testname +1m-2mn1s-6y // this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time. // NOTE: If you modify the final date of a non-banished account, // you fix the final date to (actual time +- adjustments) // // banset yyyy/mm/dd [hh:mm:ss] // Changes the final date of a banishment of an account. // Default time [hh:mm:ss]: 23:59:59. // banset 0 // Set a non-banished account (0 = unbanished). // // block // Set state 5 (You have been blocked by the GM Team) to an account. // Like state 5. // // check // Check the validity of a password for an account // NOTE: Server will never send back a password. // It's the only method you have to know if a password is correct. // The other method is to have a ('physical') access to the accounts file. // // create // Like the 'add' command, but with e-mail moreover. // create testname Male my@mail.com testpass // // del // Remove an account. // This order requires confirmation. After confirmation, the account is deleted. // // email // Modify the e-mail of an account. // // getcount // Give the number of players online on all char-servers. // // gm [GM_level] // Modify the GM level of an account. // Default value remove GM level (GM level = 0). // gm testname 80 // // id // Give the id of an account. // // info // Display complete information of an account. // // kami // Sends a broadcast message on all map-server (in yellow). // kamib // Sends a broadcast message on all map-server (in blue). // // language // Change the language of displaying. // // list/ls [start_id [end_id]] // Display a list of accounts. // 'start_id', 'end_id': indicate end and start identifiers. // Research by name is not possible with this command. // list 10 9999999 // // listBan/lsBan [start_id [end_id]] // Like list/ls, but only for accounts with state or banished // // listGM/lsGM [start_id [end_id]] // Like list/ls, but only for GM accounts // // listOK/lsOK [start_id [end_id]] // Like list/ls, but only for accounts without state and not banished // // memo // Modify the memo of an account. // 'memo': it can have until 253 characters (with spaces or not). // // name // Give the name of an account. // // passwd // Change the password of an account. // When new password is omitted, the input is done without displaying of the pressed keys. // // quit/end/exit // End of the program of administration // // reloadGM // Reload GM configuration file // // search // Seek accounts. // Displays the accounts whose names correspond. // search -r/-e/--expr/--regex // Seek accounts by regular expression. // Displays the accounts whose names correspond. // // sex // Modify the sex of an account. // sex testname Male // // state // Change the state of an account. // 'new_state': state is the state of the packet 0x006a + 1. The possibilities are: // 0 = Account ok 6 = Your Game's EXE file is not the latest version // 1 = Unregistered ID 7 = You are Prohibited to log in until %s // 2 = Incorrect Password 8 = Server is jammed due to over populated // 3 = This ID is expired 9 = No MSG // 4 = Rejected from Server 100 = This ID has been totally erased // 5 = You have been blocked by the GM Team // all other values are 'No MSG', then use state 9 please. // 'error_message_#7': message of the code error 6 = Your are Prohibited to log in until %s (packet 0x006a) // // timeadd // Adds or substracts time from the validity limit of an account. // Modifier is done as follows: // Adjustment value (-1, 1, +1, etc...) // Modified element: // a or y: year // m: month // j or d: day // h: hour // mn: minute // s: second // timeadd testname +1m-2mn1s-6y // this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time. // NOTE: You can not modify a unlimited validity limit. // If you want modify it, you want probably create a limited validity limit. // So, at first, you must set the validity limit to a date/time. // // timeset yyyy/mm/dd [hh:mm:ss] // Changes the validity limit of an account. // Default time [hh:mm:ss]: 23:59:59. // timeset 0 // Gives an unlimited validity limit (0 = unlimited). // // unban/unbanish // Unban an account. // Like banset 0. // // unblock // Set state 0 (Account ok) to an account. // Like state 0. // // version // Display the version of the login-server. // // who // Displays complete information of an account. // //------------------------------------------------------------------------- int login_fd; int login_ip; int bytes_to_read = 0; // flag to know if we waiting bytes from login-server char command[1024]; char parameters[1024]; int list_first, list_last, list_type, list_count; // parameter to display a list of accounts int already_exit_function = 0; // sometimes, the exit function is called twice... so, don't log twice the message //------------------------------ // Writing function of logs file //------------------------------ int ladmin_log(char *fmt, ...) { FILE *logfp; va_list ap; struct timeval tv; char tmpstr[2048]; va_start(ap, fmt); logfp = fopen(ladmin_log_filename, "a"); if (logfp) { if (fmt[0] == '\0') // jump a line if no message fprintf(logfp, "\n"); else { gettimeofday(&tv, NULL); strftime(tmpstr, 24, date_format, localtime((const time_t*)&(tv.tv_sec))); sprintf(tmpstr + strlen(tmpstr), ".%03d: %s", (int)tv.tv_usec / 1000, fmt); vfprintf(logfp, tmpstr, ap); } fclose(logfp); } va_end(ap); return 0; } //--------------------------------------------- // Function to return ordonal text of a number. //--------------------------------------------- char* makeordinal(int number) { if (defaultlanguage == 'F') { if (number == 0) return ""; else if (number == 1) return "er"; else return "ème"; } else { if ((number % 10) < 4 && (number % 10) != 0 && (number < 10 || number > 20)) { if ((number % 10) == 1) return "st"; else if ((number % 10) == 2) return "nd"; else return "rd"; } else { return "th"; } } return ""; } //----------------------------------------------------------------------------------------- // Function to test of the validity of an account name (return 0 if incorrect, and 1 if ok) //----------------------------------------------------------------------------------------- int verify_accountname(char* account_name) { int i; for(i = 0; account_name[i]; i++) { if (account_name[i] < 32) { if (defaultlanguage == 'F') { ShowMessage("Caractère interdit trouvé dans le nom du compte (%d%s caractère).\n", i+1, makeordinal(i+1)); ladmin_log("Caractère interdit trouvé dans le nom du compte (%d%s caractère).\n", i+1, makeordinal(i+1)); } else { ShowMessage("Illegal character found in the account name (%d%s character).\n", i+1, makeordinal(i+1)); ladmin_log("Illegal character found in the account name (%d%s character).\n", i+1, makeordinal(i+1)); } return 0; } } if (strlen(account_name) < 4) { if (defaultlanguage == 'F') { ShowMessage("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n"); ladmin_log("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n"); } else { ShowMessage("Account name is too short. Please input an account name of 4-23 bytes.\n"); ladmin_log("Account name is too short. Please input an account name of 4-23 bytes.\n"); } return 0; } if (strlen(account_name) > 23) { if (defaultlanguage == 'F') { ShowMessage("Nom du compte trop long. Entrez un nom de compte de 4-23 caractères.\n"); ladmin_log("Nom du compte trop long. Entrez un nom de compte de 4-23 caractères.\n"); } else { ShowMessage("Account name is too long. Please input an account name of 4-23 bytes.\n"); ladmin_log("Account name is too long. Please input an account name of 4-23 bytes.\n"); } return 0; } return 1; } //---------------------------------- // Sub-function: Input of a password //---------------------------------- int typepasswd(char * password) { char password1[1023], password2[1023]; int letter; int i; if (defaultlanguage == 'F') { ladmin_log("Aucun mot de passe n'a été donné. Demande d'un mot de passe.\n"); } else { ladmin_log("No password was given. Request to obtain a password.\n"); } memset(password1, '\0', sizeof(password1)); memset(password2, '\0', sizeof(password2)); if (defaultlanguage == 'F') ShowMessage("\033[1;36m Entrez le mot de passe > \033[0;32;42m"); else ShowMessage("\033[1;36m Type the password > \033[0;32;42m"); i = 0; while ((letter = getchar()) != '\n') password1[i++] = letter; if (defaultlanguage == 'F') ShowMessage("\033[0m\033[1;36m Ré-entrez le mot de passe > \033[0;32;42m"); else ShowMessage("\033[0m\033[1;36m Verify the password > \033[0;32;42m"); i = 0; while ((letter = getchar()) != '\n') password2[i++] = letter; ShowMessage("\033[0m"); fflush(stdout); fflush(stdin); if (strcmp(password1, password2) != 0) { if (defaultlanguage == 'F') { ShowMessage("Erreur de vérification du mot de passe: Saisissez le même mot de passe svp.\n"); ladmin_log("Erreur de vérification du mot de passe: Saisissez le même mot de passe svp.\n"); ladmin_log(" Premier mot de passe: %s, second mot de passe: %s.\n", password1, password2); } else { ShowMessage("Password verification failed. Please input same password.\n"); ladmin_log("Password verification failed. Please input same password.\n"); ladmin_log(" First password: %s, second password: %s.\n", password1, password2); } return 0; } if (defaultlanguage == 'F') { ladmin_log("Mot de passe saisi: %s.\n", password1); } else { ladmin_log("Typed password: %s.\n", password1); } strcpy(password, password1); return 1; } //------------------------------------------------------------------------------------ // Sub-function: Test of the validity of password (return 0 if incorrect, and 1 if ok) //------------------------------------------------------------------------------------ int verify_password(char * password) { int i; for(i = 0; password[i]; i++) { if (password[i] < 32) { if (defaultlanguage == 'F') { ShowMessage("Caractère interdit trouvé dans le mot de passe (%d%s caractère).\n", i+1, makeordinal(i+1)); ladmin_log("Caractère interdit trouvé dans le nom du compte (%d%s caractère).\n", i+1, makeordinal(i+1)); } else { ShowMessage("Illegal character found in the password (%d%s character).\n", i+1, makeordinal(i+1)); ladmin_log("Illegal character found in the password (%d%s character).\n", i+1, makeordinal(i+1)); } return 0; } } if (strlen(password) < 4) { if (defaultlanguage == 'F') { ShowMessage("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n"); ladmin_log("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n"); } else { ShowMessage("Account name is too short. Please input an account name of 4-23 bytes.\n"); ladmin_log("Account name is too short. Please input an account name of 4-23 bytes.\n"); } return 0; } if (strlen(password) > 23) { if (defaultlanguage == 'F') { ShowMessage("Mot de passe trop long. Entrez un mot de passe de 4-23 caractères.\n"); ladmin_log("Mot de passe trop long. Entrez un mot de passe de 4-23 caractères.\n"); } else { ShowMessage("Password is too long. Please input a password of 4-23 bytes.\n"); ladmin_log("Password is too long. Please input a password of 4-23 bytes.\n"); } return 0; } return 1; } //------------------------------------------------------------------ // Sub-function: Check the name of a command (return complete name) //----------------------------------------------------------------- int check_command(char * command) { // help if (strncmp(command, "aide", 2) == 0 && strncmp(command, "aide", strlen(command)) == 0) // not 1 letter command: 'aide' or 'add'? strcpy(command, "aide"); else if (strncmp(command, "help", 1) == 0 && strncmp(command, "help", strlen(command)) == 0) strcpy(command, "help"); // general commands else if (strncmp(command, "add", 2) == 0 && strncmp(command, "add", strlen(command)) == 0) // not 1 letter command: 'aide' or 'add'? strcpy(command, "add"); else if ((strncmp(command, "ban", 3) == 0 && strncmp(command, "ban", strlen(command)) == 0) || (strncmp(command, "banish", 4) == 0 && strncmp(command, "banish", strlen(command)) == 0)) strcpy(command, "ban"); else if ((strncmp(command, "banadd", 4) == 0 && strncmp(command, "banadd", strlen(command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ? strcmp(command, "ba") == 0) strcpy(command, "banadd"); else if ((strncmp(command, "banset", 4) == 0 && strncmp(command, "banset", strlen(command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ? strcmp(command, "bs") == 0) strcpy(command, "banset"); else if (strncmp(command, "block", 2) == 0 && strncmp(command, "block", strlen(command)) == 0) strcpy(command, "block"); else if (strncmp(command, "check", 2) == 0 && strncmp(command, "check", strlen(command)) == 0) // not 1 letter command: 'check' or 'create'? strcpy(command, "check"); else if (strncmp(command, "create", 2) == 0 && strncmp(command, "create", strlen(command)) == 0) // not 1 letter command: 'check' or 'create'? strcpy(command, "create"); else if (strncmp(command, "delete", 1) == 0 && strncmp(command, "delete", strlen(command)) == 0) strcpy(command, "delete"); else if ((strncmp(command, "email", 2) == 0 && strncmp(command, "email", strlen(command)) == 0) || // not 1 letter command: 'email', 'end' or 'exit'? (strncmp(command, "e-mail", 2) == 0 && strncmp(command, "e-mail", strlen(command)) == 0)) strcpy(command, "email"); else if (strncmp(command, "getcount", 2) == 0 && strncmp(command, "getcount", strlen(command)) == 0) // not 1 letter command: 'getcount' or 'gm'? strcpy(command, "getcount"); // else if (strncmp(command, "gm", 2) == 0 && strncmp(command, "gm", strlen(command)) == 0) // not 1 letter command: 'getcount' or 'gm'? // strcpy(command, "gm"); // else if (strncmp(command, "id", 2) == 0 && strncmp(command, "id", strlen(command)) == 0) // not 1 letter command: 'id' or 'info'? // strcpy(command, "id"); else if (strncmp(command, "info", 2) == 0 && strncmp(command, "info", strlen(command)) == 0) // not 1 letter command: 'id' or 'info'? strcpy(command, "info"); // else if (strncmp(command, "kami", 4) == 0 && strncmp(command, "kami", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'? // strcpy(command, "kami"); // else if (strncmp(command, "kamib", 5) == 0 && strncmp(command, "kamib", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'? // strcpy(command, "kamib"); else if ((strncmp(command, "language", 2) == 0 && strncmp(command, "language", strlen(command)) == 0)) // not 1 letter command: 'language' or 'list'? strcpy(command, "language"); else if ((strncmp(command, "list", 2) == 0 && strncmp(command, "list", strlen(command)) == 0) || // 'list' is default list command // not 1 letter command: 'language' or 'list'? strcmp(command, "ls") == 0) strcpy(command, "list"); else if ((strncmp(command, "listban", 5) == 0 && strncmp(command, "listban", strlen(command)) == 0) || (strncmp(command, "lsban", 3) == 0 && strncmp(command, "lsban", strlen(command)) == 0) || strcmp(command, "lb") == 0) strcpy(command, "listban"); else if ((strncmp(command, "listgm", 5) == 0 && strncmp(command, "listgm", strlen(command)) == 0) || (strncmp(command, "lsgm", 3) == 0 && strncmp(command, "lsgm", strlen(command)) == 0) || strcmp(command, "lg") == 0) strcpy(command, "listgm"); else if ((strncmp(command, "listok", 5) == 0 && strncmp(command, "listok", strlen(command)) == 0) || (strncmp(command, "lsok", 3) == 0 && strncmp(command, "lsok", strlen(command)) == 0) || strcmp(command, "lo") == 0) strcpy(command, "listok"); else if (strncmp(command, "memo", 1) == 0 && strncmp(command, "memo", strlen(command)) == 0) strcpy(command, "memo"); else if (strncmp(command, "name", 1) == 0 && strncmp(command, "name", strlen(command)) == 0) strcpy(command, "name"); else if ((strncmp(command, "password", 1) == 0 && strncmp(command, "password", strlen(command)) == 0) || strcmp(command, "passwd") == 0) strcpy(command, "password"); else if (strncmp(command, "reloadgm", 1) == 0 && strncmp(command, "reloadgm", strlen(command)) == 0) strcpy(command, "reloadgm"); else if (strncmp(command, "search", 3) == 0 && strncmp(command, "search", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'? strcpy(command, "search"); // not 2 letters command: 'search' or 'sex'? // else if (strncmp(command, "sex", 3) == 0 && strncmp(command, "sex", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'? // strcpy(command, "sex"); // not 2 letters command: 'search' or 'sex'? else if (strncmp(command, "state", 2) == 0 && strncmp(command, "state", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'? strcpy(command, "state"); else if ((strncmp(command, "timeadd", 5) == 0 && strncmp(command, "timeadd", strlen(command)) == 0) || // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'? strcmp(command, "ta") == 0) strcpy(command, "timeadd"); else if ((strncmp(command, "timeset", 5) == 0 && strncmp(command, "timeset", strlen(command)) == 0) || // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'? strcmp(command, "ts") == 0) strcpy(command, "timeset"); else if ((strncmp(command, "unban", 5) == 0 && strncmp(command, "unban", strlen(command)) == 0) || (strncmp(command, "unbanish", 4) == 0 && strncmp(command, "unbanish", strlen(command)) == 0)) strcpy(command, "unban"); else if (strncmp(command, "unblock", 4) == 0 && strncmp(command, "unblock", strlen(command)) == 0) strcpy(command, "unblock"); else if (strncmp(command, "version", 1) == 0 && strncmp(command, "version", strlen(command)) == 0) strcpy(command, "version"); else if (strncmp(command, "who", 1) == 0 && strncmp(command, "who", strlen(command)) == 0) strcpy(command, "who"); // quit else if (strncmp(command, "quit", 1) == 0 && strncmp(command, "quit", strlen(command)) == 0) strcpy(command, "quit"); else if (strncmp(command, "exit", 2) == 0 && strncmp(command, "exit", strlen(command)) == 0) // not 1 letter command: 'email', 'end' or 'exit'? strcpy(command, "exit"); else if (strncmp(command, "end", 2) == 0 && strncmp(command, "end", strlen(command)) == 0) // not 1 letter command: 'email', 'end' or 'exit'? strcpy(command, "end"); return 0; } //----------------------------------------- // Sub-function: Display commands of ladmin //----------------------------------------- void display_help(char* param, int language) { char command[1023]; int i; memset(command, '\0', sizeof(command)); if (sscanf(param, "%s ", command) < 1 || strlen(command) == 0) strcpy(command, ""); // any value that is not a command if (command[0] == '?') { if (defaultlanguage == 'F') strcpy(command, "aide"); else strcpy(command, "help"); } // lowercase for command for (i = 0; command[i]; i++) command[i] = TOLOWER(command[i]); // Analyse of the command check_command(command); // give complete name to the command if (defaultlanguage == 'F') { ladmin_log("Affichage des commandes ou d'une commande.\n"); } else { ladmin_log("Displaying of the commands or a command.\n"); } if (language == 1) { if (strcmp(command, "aide") == 0) { ShowMessage("aide/help/?\n"); ShowMessage(" Affiche la description des commandes\n"); ShowMessage("aide/help/? [commande]\n"); ShowMessage(" Affiche la description de la commande specifiée\n"); } else if (strcmp(command, "help") == 0 ) { ShowMessage("aide/help/?\n"); ShowMessage(" Display the description of the commands\n"); ShowMessage("aide/help/? [command]\n"); ShowMessage(" Display the description of the specified command\n"); // general commands } else if (strcmp(command, "add") == 0) { ShowMessage("add \n"); ShowMessage(" Crée un compte avec l'email par défaut (a@a.com).\n"); ShowMessage(" Concernant le sexe, seule la première lettre compte (F ou M).\n"); ShowMessage(" L'e-mail est a@a.com (e-mail par défaut). C'est comme n'avoir aucun e-mail.\n"); ShowMessage(" Lorsque motdepasse est omis, la saisie se fait sans que la frappe se voit.\n"); ShowMessage(" add testname Male testpass\n"); } else if (strcmp(command, "ban") == 0) { ShowMessage("ban/banish aaaa/mm/jj hh:mm:ss \n"); ShowMessage(" Change la date de fin de bannissement d'un compte.\n"); ShowMessage(" Comme banset, mais est à la fin.\n"); } else if (strcmp(command, "banadd") == 0) { ShowMessage("banadd \n"); ShowMessage(" Ajoute ou soustrait du temps à la date de banissement d'un compte.\n"); ShowMessage(" Les modificateurs sont construits comme suit:\n"); ShowMessage(" Valeur d'ajustement (-1, 1, +1, etc...)\n"); ShowMessage(" Elément modifié:\n"); ShowMessage(" a ou y: année\n"); ShowMessage(" m: mois\n"); ShowMessage(" j ou d: jour\n"); ShowMessage(" h: heure\n"); ShowMessage(" mn: minute\n"); ShowMessage(" s: seconde\n"); ShowMessage(" banadd testname +1m-2mn1s-6a\n"); ShowMessage(" Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n"); ShowMessage(" et 6 ans dans le même temps.\n"); ShowMessage("NOTE: Si vous modifez la date de banissement d'un compte non bani,\n"); ShowMessage(" vous indiquez comme date (le moment actuel +- les ajustements)\n"); } else if (strcmp(command, "banset") == 0) { ShowMessage("banset aaaa/mm/jj [hh:mm:ss]\n"); ShowMessage(" Change la date de fin de bannissement d'un compte.\n"); ShowMessage(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); ShowMessage("banset 0\n"); ShowMessage(" Débanni un compte (0 = de-banni).\n"); } else if (strcmp(command, "block") == 0) { ShowMessage("block \n"); ShowMessage(" Place le status d'un compte à 5 (You have been blocked by the GM Team).\n"); ShowMessage(" La commande est l'équivalent de state 5.\n"); } else if (strcmp(command, "check") == 0) { ShowMessage("check \n"); ShowMessage(" Vérifie la validité d'un mot de passe pour un compte\n"); ShowMessage(" NOTE: Le serveur n'enverra jamais un mot de passe.\n"); ShowMessage(" C'est la seule méthode que vous possédez pour savoir\n"); ShowMessage(" si un mot de passe est le bon. L'autre méthode est\n"); ShowMessage(" d'avoir un accès ('physique') au fichier des comptes.\n"); } else if (strcmp(command, "create") == 0) { ShowMessage("create \n"); ShowMessage(" Comme la commande add, mais avec l'e-mail en plus.\n"); ShowMessage(" create testname Male mon@mail.com testpass\n"); } else if (strcmp(command, "delete") == 0) { ShowMessage("del \n"); ShowMessage(" Supprime un compte.\n"); ShowMessage(" La commande demande confirmation. Après confirmation, le compte est détruit.\n"); } else if (strcmp(command, "email") == 0) { ShowMessage("email \n"); ShowMessage(" Modifie l'e-mail d'un compte.\n"); } else if (strcmp(command, "getcount") == 0) { ShowMessage("getcount\n"); ShowMessage(" Donne le nombre de joueurs en ligne par serveur de char.\n"); } else if (strcmp(command, "gm") == 0) { ShowMessage("gm [Niveau_GM]\n"); ShowMessage(" Modifie le niveau de GM d'un compte.\n"); ShowMessage(" Valeur par défaut: 0 (suppression du niveau de GM).\n"); ShowMessage(" gm nomtest 80\n"); } else if (strcmp(command, "id") == 0) { ShowMessage("id \n"); ShowMessage(" Donne l'id d'un compte.\n"); } else if (strcmp(command, "info") == 0) { ShowMessage("info \n"); ShowMessage(" Affiche les informations sur un compte.\n"); } else if (strcmp(command, "kami") == 0) { ShowMessage("kami \n"); ShowMessage(" Envoi un message général sur tous les serveurs de map (en jaune).\n"); } else if (strcmp(command, "kamib") == 0) { ShowMessage("kamib \n"); ShowMessage(" Envoi un message général sur tous les serveurs de map (en bleu).\n"); } else if (strcmp(command, "language") == 0) { ShowMessage("language \n"); ShowMessage(" Change la langue d'affichage.\n"); ShowMessage(" Langues possibles: 'Français' ou 'English'.\n"); } else if (strcmp(command, "list") == 0) { ShowMessage("list/ls [Premier_id [Dernier_id]]\n"); ShowMessage(" Affiche une liste de comptes.\n"); ShowMessage(" 'Premier_id', 'Dernier_id': indique les identifiants de départ et de fin.\n"); ShowMessage(" La recherche par nom n'est pas possible avec cette commande.\n"); ShowMessage(" list 10 9999999\n"); } else if (strcmp(command, "listban") == 0) { ShowMessage("listBan/lsBan [Premier_id [Dernier_id]]\n"); ShowMessage(" Comme list/ls, mais seulement pour les comptes avec statut ou bannis.\n"); } else if (strcmp(command, "listgm") == 0) { ShowMessage("listGM/lsGM [Premier_id [Dernier_id]]\n"); ShowMessage(" Comme list/ls, mais seulement pour les comptes GM.\n"); } else if (strcmp(command, "listok") == 0) { ShowMessage("listOK/lsOK [Premier_id [Dernier_id]]\n"); ShowMessage(" Comme list/ls, mais seulement pour les comptes sans statut et non bannis.\n"); } else if (strcmp(command, "memo") == 0) { ShowMessage("memo \n"); ShowMessage(" Modifie le mémo d'un compte.\n"); ShowMessage(" 'memo': Il peut avoir jusqu'à 253 caractères (avec des espaces ou non).\n"); } else if (strcmp(command, "name") == 0) { ShowMessage("name \n"); ShowMessage(" Donne le nom d'un compte.\n"); } else if (strcmp(command, "password") == 0) { ShowMessage("passwd \n"); ShowMessage(" Change le mot de passe d'un compte.\n"); ShowMessage(" Lorsque nouveaumotdepasse est omis,\n"); ShowMessage(" la saisie se fait sans que la frappe ne se voit.\n"); } else if (strcmp(command, "reloadgm") == 0) { ShowMessage("reloadGM\n"); ShowMessage(" Reload GM configuration file\n"); } else if (strcmp(command, "search") == 0) { ShowMessage("search \n"); ShowMessage(" Cherche des comptes.\n"); ShowMessage(" Affiche les comptes dont les noms correspondent.\n"); // ShowMessage("search -r/-e/--expr/--regex \n"); // ShowMessage(" Cherche des comptes par expression regulière.\n"); // ShowMessage(" Affiche les comptes dont les noms correspondent.\n"); } else if (strcmp(command, "sex") == 0) { ShowMessage("sex \n"); ShowMessage(" Modifie le sexe d'un compte.\n"); ShowMessage(" sex testname Male\n"); } else if (strcmp(command, "state") == 0) { ShowMessage("state \n"); ShowMessage(" Change le statut d'un compte.\n"); ShowMessage(" 'nouveaustatut': Le statut est le même que celui du packet 0x006a + 1.\n"); ShowMessage(" les possibilités sont:\n"); ShowMessage(" 0 = Compte ok\n"); ShowMessage(" 1 = Unregistered ID\n"); ShowMessage(" 2 = Incorrect Password\n"); ShowMessage(" 3 = This ID is expired\n"); ShowMessage(" 4 = Rejected from Server\n"); ShowMessage(" 5 = You have been blocked by the GM Team\n"); ShowMessage(" 6 = Your Game's EXE file is not the latest version\n"); ShowMessage(" 7 = You are Prohibited to log in until...\n"); ShowMessage(" 8 = Server is jammed due to over populated\n"); ShowMessage(" 9 = No MSG\n"); ShowMessage(" 100 = This ID has been totally erased\n"); ShowMessage(" all other values are 'No MSG', then use state 9 please.\n"); ShowMessage(" 'message_erreur_7': message du code erreur 6 =\n"); ShowMessage(" = Your are Prohibited to log in until... (packet 0x006a)\n"); } else if (strcmp(command, "timeadd") == 0) { ShowMessage("timeadd \n"); ShowMessage(" Ajoute/soustrait du temps à la limite de validité d'un compte.\n"); ShowMessage(" Le modificateur est composé comme suit:\n"); ShowMessage(" Valeur modificatrice (-1, 1, +1, etc...)\n"); ShowMessage(" Elément modifié:\n"); ShowMessage(" a ou y: année\n"); ShowMessage(" m: mois\n"); ShowMessage(" j ou d: jour\n"); ShowMessage(" h: heure\n"); ShowMessage(" mn: minute\n"); ShowMessage(" s: seconde\n"); ShowMessage(" timeadd testname +1m-2mn1s-6a\n"); ShowMessage(" Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n"); ShowMessage(" et 6 ans dans le même temps.\n"); ShowMessage("NOTE: Vous ne pouvez pas modifier une limite de validité illimitée. Si vous\n"); ShowMessage(" désirez le faire, c'est que vous voulez probablement créer un limite de\n"); ShowMessage(" validité limitée. Donc, en premier, fixé une limite de valitidé.\n"); } else if (strcmp(command, "timeadd") == 0) { ShowMessage("timeset aaaa/mm/jj [hh:mm:ss]\n"); ShowMessage(" Change la limite de validité d'un compte.\n"); ShowMessage(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); ShowMessage("timeset 0\n"); ShowMessage(" Donne une limite de validité illimitée (0 = illimitée).\n"); } else if (strcmp(command, "unban") == 0) { ShowMessage("unban/unbanish \n"); ShowMessage(" Ote le banissement d'un compte.\n"); ShowMessage(" La commande est l'équivalent de banset 0.\n"); } else if (strcmp(command, "unblock") == 0) { ShowMessage("unblock \n"); ShowMessage(" Place le status d'un compte à 0 (Compte ok).\n"); ShowMessage(" La commande est l'équivalent de state 0.\n"); } else if (strcmp(command, "version") == 0) { ShowMessage("version\n"); ShowMessage(" Affiche la version du login-serveur.\n"); } else if (strcmp(command, "who") == 0) { ShowMessage("who \n"); ShowMessage(" Affiche les informations sur un compte.\n"); // quit } else if (strcmp(command, "quit") == 0 || strcmp(command, "exit") == 0 || strcmp(command, "end") == 0) { ShowMessage("quit/end/exit\n"); ShowMessage(" Fin du programme d'administration.\n"); // unknown command } else { if (strlen(command) > 0) ShowMessage("Commande inconnue [%s] pour l'aide. Affichage de toutes les commandes.\n", command); ShowMessage(" aide/help/? -- Affiche cet aide\n"); ShowMessage(" aide/help/? [commande] -- Affiche l'aide de la commande\n"); ShowMessage(" add -- Crée un compte (sans email)\n"); ShowMessage(" ban/banish aaaa/mm/jj hh:mm:ss -- Fixe la date finale de banismnt\n"); ShowMessage(" banadd/ba -- Ajout/soustrait du temps à la\n"); ShowMessage(" exemple: ba moncompte +1m-2mn1s-2y date finale de banissement\n"); ShowMessage(" banset/bs aaaa/mm/jj [hh:mm:ss] -- Change la date fin de banisemnt\n"); ShowMessage(" banset/bs 0 -- Dé-banis un compte.\n"); ShowMessage(" block -- Mets le status d'un compte à 5 (blocked by the GM Team)\n"); ShowMessage(" check -- Vérifie un mot de passe d'un compte\n"); ShowMessage(" create -- Crée un compte (avec email)\n"); ShowMessage(" del -- Supprime un compte\n"); ShowMessage(" email -- Modifie l'e-mail d'un compte\n"); ShowMessage(" getcount -- Donne le nb de joueurs en ligne\n"); ShowMessage(" gm [Niveau_GM] -- Modifie le niveau de GM d'un compte\n"); ShowMessage(" id -- Donne l'id d'un compte\n"); ShowMessage(" info -- Affiche les infos sur un compte\n"); ShowMessage(" kami -- Envoi un message général (en jaune)\n"); ShowMessage(" kamib -- Envoi un message général (en bleu)\n"); ShowMessage(" language -- Change la langue d'affichage.\n"); ShowMessage(" list/ls [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n"); ShowMessage(" listBan/lsBan [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n"); ShowMessage(" avec un statut ou bannis\n"); ShowMessage(" listGM/lsGM [Premier_id [Dernier_id] ] -- Affiche une liste de comptes GM\n"); ShowMessage(" listOK/lsOK [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n"); ShowMessage(" sans status et non bannis\n"); ShowMessage(" memo -- Modifie le memo d'un compte\n"); ShowMessage(" name -- Donne le nom d'un compte\n"); ShowMessage(" passwd -- Change le mot de passe d'un compte\n"); ShowMessage(" quit/end/exit -- Fin du programme d'administation\n"); ShowMessage(" reloadGM -- Recharger le fichier de config des GM\n"); ShowMessage(" search -- Cherche des comptes\n"); // ShowMessage(" search -e/-r/--expr/--regex -- Cherche des comptes par REGEX\n"); ShowMessage(" sex -- Modifie le sexe d'un compte\n"); ShowMessage(" state -- Change le statut d'1 compte\n"); ShowMessage(" timeadd/ta -- Ajout/soustrait du temps à la\n"); ShowMessage(" exemple: ta moncompte +1m-2mn1s-2y limite de validité\n"); ShowMessage(" timeset/ts aaaa/mm/jj [hh:mm:ss] -- Change la limite de validité\n"); ShowMessage(" timeset/ts 0 -- limite de validité = illimitée\n"); ShowMessage(" unban/unbanish -- Ote le banissement d'un compte\n"); ShowMessage(" unblock -- Mets le status d'un compte à 0 (Compte ok)\n"); ShowMessage(" version -- Donne la version du login-serveur\n"); ShowMessage(" who -- Affiche les infos sur un compte\n"); ShowMessage(" Note: Pour les noms de compte avec des espaces, tapez \"\" (ou ').\n"); } } else { if (strcmp(command, "aide") == 0) { ShowMessage("aide/help/?\n"); ShowMessage(" Display the description of the commands\n"); ShowMessage("aide/help/? [command]\n"); ShowMessage(" Display the description of the specified command\n"); } else if (strcmp(command, "help") == 0 ) { ShowMessage("aide/help/?\n"); ShowMessage(" Display the description of the commands\n"); ShowMessage("aide/help/? [command]\n"); ShowMessage(" Display the description of the specified command\n"); // general commands } else if (strcmp(command, "add") == 0) { ShowMessage("add \n"); ShowMessage(" Create an account with the default email (a@a.com).\n"); ShowMessage(" Concerning the sex, only the first letter is used (F or M).\n"); ShowMessage(" The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.\n"); ShowMessage(" When the password is omitted,\n"); ShowMessage(" the input is done without displaying of the pressed keys.\n"); ShowMessage(" add testname Male testpass\n"); } else if (strcmp(command, "ban") == 0) { ShowMessage("ban/banish yyyy/mm/dd hh:mm:ss \n"); ShowMessage(" Changes the final date of a banishment of an account.\n"); ShowMessage(" Like banset, but is at end.\n"); } else if (strcmp(command, "banadd") == 0) { ShowMessage("banadd \n"); ShowMessage(" Adds or substracts time from the final date of a banishment of an account.\n"); ShowMessage(" Modifier is done as follows:\n"); ShowMessage(" Adjustment value (-1, 1, +1, etc...)\n"); ShowMessage(" Modified element:\n"); ShowMessage(" a or y: year\n"); ShowMessage(" m: month\n"); ShowMessage(" j or d: day\n"); ShowMessage(" h: hour\n"); ShowMessage(" mn: minute\n"); ShowMessage(" s: second\n"); ShowMessage(" banadd testname +1m-2mn1s-6y\n"); ShowMessage(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); ShowMessage(" and 6 years at the same time.\n"); ShowMessage("NOTE: If you modify the final date of a non-banished account,\n"); ShowMessage(" you fix the final date to (actual time +- adjustments)\n"); } else if (strcmp(command, "banset") == 0) { ShowMessage("banset yyyy/mm/dd [hh:mm:ss]\n"); ShowMessage(" Changes the final date of a banishment of an account.\n"); ShowMessage(" Default time [hh:mm:ss]: 23:59:59.\n"); ShowMessage("banset 0\n"); ShowMessage(" Set a non-banished account (0 = unbanished).\n"); } else if (strcmp(command, "block") == 0) { ShowMessage("block \n"); ShowMessage(" Set state 5 (You have been blocked by the GM Team) to an account.\n"); ShowMessage(" This command works like state 5.\n"); } else if (strcmp(command, "check") == 0) { ShowMessage("check \n"); ShowMessage(" Check the validity of a password for an account.\n"); ShowMessage(" NOTE: Server will never send back a password.\n"); ShowMessage(" It's the only method you have to know if a password is correct.\n"); ShowMessage(" The other method is to have a ('physical') access to the accounts file.\n"); } else if (strcmp(command, "create") == 0) { ShowMessage("create \n"); ShowMessage(" Like the 'add' command, but with e-mail moreover.\n"); ShowMessage(" create testname Male my@mail.com testpass\n"); } else if (strcmp(command, "delete") == 0) { ShowMessage("del \n"); ShowMessage(" Remove an account.\n"); ShowMessage(" This order requires confirmation. After confirmation, the account is deleted.\n"); } else if (strcmp(command, "email") == 0) { ShowMessage("email \n"); ShowMessage(" Modify the e-mail of an account.\n"); } else if (strcmp(command, "getcount") == 0) { ShowMessage("getcount\n"); ShowMessage(" Give the number of players online on all char-servers.\n"); } else if (strcmp(command, "gm") == 0) { ShowMessage("gm [GM_level]\n"); ShowMessage(" Modify the GM level of an account.\n"); ShowMessage(" Default value remove GM level (GM level = 0).\n"); ShowMessage(" gm testname 80\n"); } else if (strcmp(command, "id") == 0) { ShowMessage("id \n"); ShowMessage(" Give the id of an account.\n"); } else if (strcmp(command, "info") == 0) { ShowMessage("info \n"); ShowMessage(" Display complete information of an account.\n"); } else if (strcmp(command, "kami") == 0) { ShowMessage("kami \n"); ShowMessage(" Sends a broadcast message on all map-server (in yellow).\n"); } else if (strcmp(command, "kamib") == 0) { ShowMessage("kamib \n"); ShowMessage(" Sends a broadcast message on all map-server (in blue).\n"); } else if (strcmp(command, "language") == 0) { ShowMessage("language \n"); ShowMessage(" Change the language of displaying.\n"); ShowMessage(" Possible languages: Français or English.\n"); } else if (strcmp(command, "list") == 0) { ShowMessage("list/ls [start_id [end_id]]\n"); ShowMessage(" Display a list of accounts.\n"); ShowMessage(" 'start_id', 'end_id': indicate end and start identifiers.\n"); ShowMessage(" Research by name is not possible with this command.\n"); ShowMessage(" list 10 9999999\n"); } else if (strcmp(command, "listban") == 0) { ShowMessage("listBan/lsBan [start_id [end_id]]\n"); ShowMessage(" Like list/ls, but only for accounts with state or banished.\n"); } else if (strcmp(command, "listgm") == 0) { ShowMessage("listGM/lsGM [start_id [end_id]]\n"); ShowMessage(" Like list/ls, but only for GM accounts.\n"); } else if (strcmp(command, "listok") == 0) { ShowMessage("listOK/lsOK [start_id [end_id]]\n"); ShowMessage(" Like list/ls, but only for accounts without state and not banished.\n"); } else if (strcmp(command, "memo") == 0) { ShowMessage("memo \n"); ShowMessage(" Modify the memo of an account.\n"); ShowMessage(" 'memo': it can have until 253 characters (with spaces or not).\n"); } else if (strcmp(command, "name") == 0) { ShowMessage("name \n"); ShowMessage(" Give the name of an account.\n"); } else if (strcmp(command, "password") == 0) { ShowMessage("passwd \n"); ShowMessage(" Change the password of an account.\n"); ShowMessage(" When new password is omitted,\n"); ShowMessage(" the input is done without displaying of the pressed keys.\n"); } else if (strcmp(command, "reloadgm") == 0) { ShowMessage("reloadGM\n"); ShowMessage(" Reload GM configuration file\n"); } else if (strcmp(command, "search") == 0) { ShowMessage("search \n"); ShowMessage(" Seek accounts.\n"); ShowMessage(" Displays the accounts whose names correspond.\n"); // ShowMessage("search -r/-e/--expr/--regex \n"); // ShowMessage(" Seek accounts by regular expression.\n"); // ShowMessage(" Displays the accounts whose names correspond.\n"); } else if (strcmp(command, "sex") == 0) { ShowMessage("sex \n"); ShowMessage(" Modify the sex of an account.\n"); ShowMessage(" sex testname Male\n"); } else if (strcmp(command, "state") == 0) { ShowMessage("state \n"); ShowMessage(" Change the state of an account.\n"); ShowMessage(" 'new_state': state is the state of the packet 0x006a + 1.\n"); ShowMessage(" The possibilities are:\n"); ShowMessage(" 0 = Account ok\n"); ShowMessage(" 1 = Unregistered ID\n"); ShowMessage(" 2 = Incorrect Password\n"); ShowMessage(" 3 = This ID is expired\n"); ShowMessage(" 4 = Rejected from Server\n"); ShowMessage(" 5 = You have been blocked by the GM Team\n"); ShowMessage(" 6 = Your Game's EXE file is not the latest version\n"); ShowMessage(" 7 = You are Prohibited to log in until...\n"); ShowMessage(" 8 = Server is jammed due to over populated\n"); ShowMessage(" 9 = No MSG\n"); ShowMessage(" 100 = This ID has been totally erased\n"); ShowMessage(" all other values are 'No MSG', then use state 9 please.\n"); ShowMessage(" 'error_message_#7': message of the code error 6\n"); ShowMessage(" = Your are Prohibited to log in until... (packet 0x006a)\n"); } else if (strcmp(command, "timeadd") == 0) { ShowMessage("timeadd \n"); ShowMessage(" Adds or substracts time from the validity limit of an account.\n"); ShowMessage(" Modifier is done as follows:\n"); ShowMessage(" Adjustment value (-1, 1, +1, etc...)\n"); ShowMessage(" Modified element:\n"); ShowMessage(" a or y: year\n"); ShowMessage(" m: month\n"); ShowMessage(" j or d: day\n"); ShowMessage(" h: hour\n"); ShowMessage(" mn: minute\n"); ShowMessage(" s: second\n"); ShowMessage(" timeadd testname +1m-2mn1s-6y\n"); ShowMessage(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); ShowMessage(" and 6 years at the same time.\n"); ShowMessage("NOTE: You can not modify a unlimited validity limit.\n"); ShowMessage(" If you want modify it, you want probably create a limited validity limit.\n"); ShowMessage(" So, at first, you must set the validity limit to a date/time.\n"); } else if (strcmp(command, "timeadd") == 0) { ShowMessage("timeset yyyy/mm/dd [hh:mm:ss]\n"); ShowMessage(" Changes the validity limit of an account.\n"); ShowMessage(" Default time [hh:mm:ss]: 23:59:59.\n"); ShowMessage("timeset 0\n"); ShowMessage(" Gives an unlimited validity limit (0 = unlimited).\n"); } else if (strcmp(command, "unban") == 0) { ShowMessage("unban/unbanish \n"); ShowMessage(" Remove the banishment of an account.\n"); ShowMessage(" This command works like banset 0.\n"); } else if (strcmp(command, "unblock") == 0) { ShowMessage("unblock \n"); ShowMessage(" Set state 0 (Account ok) to an account.\n"); ShowMessage(" This command works like state 0.\n"); } else if (strcmp(command, "version") == 0) { ShowMessage("version\n"); ShowMessage(" Display the version of the login-server.\n"); } else if (strcmp(command, "who") == 0) { ShowMessage("who \n"); ShowMessage(" Displays complete information of an account.\n"); // quit } else if (strcmp(command, "quit") == 0 || strcmp(command, "exit") == 0 || strcmp(command, "end") == 0) { ShowMessage("quit/end/exit\n"); ShowMessage(" End of the program of administration.\n"); // unknown command } else { if (strlen(command) > 0) ShowMessage("Unknown command [%s] for help. Displaying of all commands.\n", command); ShowMessage(" aide/help/? -- Display this help\n"); ShowMessage(" aide/help/? [command] -- Display the help of the command\n"); ShowMessage(" add -- Create an account with default email\n"); ShowMessage(" ban/banish yyyy/mm/dd hh:mm:ss -- Change final date of a ban\n"); ShowMessage(" banadd/ba -- Add or substract time from the final\n"); ShowMessage(" example: ba apple +1m-2mn1s-2y date of a banishment of an account\n"); ShowMessage(" banset/bs yyyy/mm/dd [hh:mm:ss] -- Change final date of a ban\n"); ShowMessage(" banset/bs 0 -- Un-banish an account\n"); ShowMessage(" block -- Set state 5 (blocked by the GM Team) to an account\n"); ShowMessage(" check -- Check the validity of a password\n"); ShowMessage(" create -- Create an account with email\n"); ShowMessage(" del -- Remove an account\n"); ShowMessage(" email -- Modify an email of an account\n"); ShowMessage(" getcount -- Give the number of players online\n"); ShowMessage(" gm [GM_level] -- Modify the GM level of an account\n"); ShowMessage(" id -- Give the id of an account\n"); ShowMessage(" info -- Display all information of an account\n"); ShowMessage(" kami -- Sends a broadcast message (in yellow)\n"); ShowMessage(" kamib -- Sends a broadcast message (in blue)\n"); ShowMessage(" language -- Change the language of displaying.\n"); ShowMessage(" list/ls [First_id [Last_id]] -- Display a list of accounts\n"); ShowMessage(" listBan/lsBan [First_id [Last_id] ] -- Display a list of accounts\n"); ShowMessage(" with state or banished\n"); ShowMessage(" listGM/lsGM [First_id [Last_id]] -- Display a list of GM accounts\n"); ShowMessage(" listOK/lsOK [First_id [Last_id] ] -- Display a list of accounts\n"); ShowMessage(" without state and not banished\n"); ShowMessage(" memo -- Modify the memo of an account\n"); ShowMessage(" name -- Give the name of an account\n"); ShowMessage(" passwd -- Change the password of an account\n"); ShowMessage(" quit/end/exit -- End of the program of administation\n"); ShowMessage(" reloadGM -- Reload GM configuration file\n"); ShowMessage(" search -- Seek accounts\n"); // ShowMessage(" search -e/-r/--expr/--regex -- Seek accounts by regular-expression\n"); ShowMessage(" sex -- Modify the sex of an account\n"); ShowMessage(" state -- Change the state\n"); ShowMessage(" timeadd/ta -- Add or substract time from the\n"); ShowMessage(" example: ta apple +1m-2mn1s-2y validity limit of an account\n"); ShowMessage(" timeset/ts yyyy/mm/dd [hh:mm:ss] -- Change the validify limit\n"); ShowMessage(" timeset/ts 0 -- Give a unlimited validity limit\n"); ShowMessage(" unban/unbanish -- Remove the banishment of an account\n"); ShowMessage(" unblock -- Set state 0 (Account ok) to an account\n"); ShowMessage(" version -- Gives the version of the login-server\n"); ShowMessage(" who -- Display all information of an account\n"); ShowMessage(" who -- Display all information of an account\n"); ShowMessage(" Note: To use spaces in an account name, type \"\" (or ').\n"); } } } //----------------------------- // Sub-function: add an account //----------------------------- int addaccount(char* param, int emailflag) { char name[1023], sex[1023], email[1023], password[1023]; // int i; WFIFOHEAD(login_fd,91); memset(name, '\0', sizeof(name)); memset(sex, '\0', sizeof(sex)); memset(email, '\0', sizeof(email)); memset(password, '\0', sizeof(password)); if (emailflag == 0) { // add command if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, sex, password) < 2 && // password can be void sscanf(param, "'%[^']' %s %[^\r\n]", name, sex, password) < 2 && // password can be void sscanf(param, "%s %s %[^\r\n]", name, sex, password) < 2) { // password can be void if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte, un sexe et un mot de passe svp.\n"); ShowMessage(" add nomtest Male motdepassetest\n"); ladmin_log("Nombre incorrect de paramètres pour créer un compte (commande 'add').\n"); } else { ShowMessage("Please input an account name, a sex and a password.\n"); ShowMessage(" add testname Male testpass\n"); ladmin_log("Incomplete parameters to create an account ('add' command).\n"); } return 136; } strcpy(email, "a@a.com"); // default email } else { // 1: create command if (sscanf(param, "\"%[^\"]\" %s %s %[^\r\n]", name, sex, email, password) < 3 && // password can be void sscanf(param, "'%[^']' %s %s %[^\r\n]", name, sex, email, password) < 3 && // password can be void sscanf(param, "%s %s %s %[^\r\n]", name, sex, email, password) < 3) { // password can be void if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte, un sexe et un mot de passe svp.\n"); ShowMessage(" create nomtest Male mo@mail.com motdepassetest\n"); ladmin_log("Nombre incorrect de paramètres pour créer un compte (commande 'create').\n"); } else { ShowMessage("Please input an account name, a sex and a password.\n"); ShowMessage(" create testname Male my@mail.com testpass\n"); ladmin_log("Incomplete parameters to create an account ('create' command).\n"); } return 136; } } if (verify_accountname(name) == 0) { return 102; } sex[0] = TOUPPER(sex[0]); if (strchr("MF", sex[0]) == NULL) { if (defaultlanguage == 'F') { ShowMessage("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex); ladmin_log("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex); } else { ShowMessage("Illegal gender [%s]. Please input M or F.\n", sex); ladmin_log("Illegal gender [%s]. Please input M or F.\n", sex); } return 103; } if (strlen(email) < 3) { if (defaultlanguage == 'F') { ShowMessage("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email); ladmin_log("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email); } else { ShowMessage("Email is too short [%s]. Please input a valid e-mail.\n", email); ladmin_log("Email is too short [%s]. Please input a valid e-mail.\n", email); } return 109; } if (strlen(email) > 39) { if (defaultlanguage == 'F') { ShowMessage("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n", email); ladmin_log("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n", email); } else { ShowMessage("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email); ladmin_log("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email); } return 109; } if (e_mail_check(email) == 0) { if (defaultlanguage == 'F') { ShowMessage("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email); ladmin_log("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email); } else { ShowMessage("Invalid email [%s]. Please input a valid e-mail.\n", email); ladmin_log("Invalid email [%s]. Please input a valid e-mail.\n", email); } return 109; } if (strlen(password) == 0) { if (typepasswd(password) == 0) return 108; } if (verify_password(password) == 0) return 104; if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour créer un compte.\n"); } else { ladmin_log("Request to login-server to create an account.\n"); } WFIFOW(login_fd,0) = 0x7930; memcpy(WFIFOP(login_fd,2), name, 24); memcpy(WFIFOP(login_fd,26), password, 24); WFIFOB(login_fd,50) = sex[0]; memcpy(WFIFOP(login_fd,51), email, 40); WFIFOSET(login_fd,91); bytes_to_read = 1; return 0; } //--------------------------------------------------------------------------------- // Sub-function: Add/substract time to the final date of a banishment of an account //--------------------------------------------------------------------------------- int banaddaccount(char* param) { char name[1023], modif[1023]; int year, month, day, hour, minute, second; char * p_modif; int value, i; WFIFOHEAD(login_fd,38); memset(name, '\0', sizeof(name)); memset(modif, '\0', sizeof(modif)); year = month = day = hour = minute = second = 0; if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 && sscanf(param, "'%[^']' %[^\r\n]", name, modif) < 2 && sscanf(param, "%s %[^\r\n]", name, modif) < 2) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte et un modificateur svp.\n"); ShowMessage(" banadd nomtest +1m-2mn1s-6y\n"); ShowMessage(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); ShowMessage(" et 6 ans dans le même temps.\n"); ladmin_log("Nombre incorrect de paramètres pour modifier la fin de ban d'un compte (commande 'banadd').\n"); } else { ShowMessage("Please input an account name and a modifier.\n"); ShowMessage(" : banadd testname +1m-2mn1s-6y\n"); ShowMessage(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); ShowMessage(" and 6 years at the same time.\n"); ladmin_log("Incomplete parameters to modify the ban date/time of an account ('banadd' command).\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } // lowercase for modif for (i = 0; modif[i]; i++) modif[i] = TOLOWER(modif[i]); p_modif = modif; while (strlen(p_modif) > 0) { value = atoi(p_modif); if (value == 0) { p_modif++; } else { if (p_modif[0] == '-' || p_modif[0] == '+') p_modif++; while (strlen(p_modif) > 0 && p_modif[0] >= '0' && p_modif[0] <= '9') { p_modif++; } if (p_modif[0] == 's') { second = value; p_modif++; } else if (p_modif[0] == 'm' && p_modif[1] == 'n') { minute = value; p_modif += 2; } else if (p_modif[0] == 'h') { hour = value; p_modif++; } else if (p_modif[0] == 'd' || p_modif[0] == 'j') { day = value; p_modif += 2; } else if (p_modif[0] == 'm') { month = value; p_modif++; } else if (p_modif[0] == 'y' || p_modif[0] == 'a') { year = value; p_modif++; } else { p_modif++; } } } if (defaultlanguage == 'F') { ShowMessage(" année: %d\n", year); ShowMessage(" mois: %d\n", month); ShowMessage(" jour: %d\n", day); ShowMessage(" heure: %d\n", hour); ShowMessage(" minute: %d\n", minute); ShowMessage(" seconde: %d\n", second); } else { ShowMessage(" year: %d\n", year); ShowMessage(" month: %d\n", month); ShowMessage(" day: %d\n", day); ShowMessage(" hour: %d\n", hour); ShowMessage(" minute: %d\n", minute); ShowMessage(" second: %d\n", second); } if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0 && second == 0) { if (defaultlanguage == 'F') { ShowMessage("Vous devez entrer un ajustement avec cette commande, svp:\n"); ShowMessage(" Valeur d'ajustement (-1, 1, +1, etc...)\n"); ShowMessage(" Element modifié:\n"); ShowMessage(" a ou y: année\n"); ShowMessage(" m: mois\n"); ShowMessage(" j ou d: jour\n"); ShowMessage(" h: heure\n"); ShowMessage(" mn: minute\n"); ShowMessage(" s: seconde\n"); ShowMessage(" banadd nomtest +1m-2mn1s-6y\n"); ShowMessage(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); ShowMessage(" et 6 ans dans le même temps.\n"); ladmin_log("Aucun ajustement n'est pas un ajustement (commande 'banadd').\n"); } else { ShowMessage("Please give an adjustment with this command:\n"); ShowMessage(" Adjustment value (-1, 1, +1, etc...)\n"); ShowMessage(" Modified element:\n"); ShowMessage(" a or y: year\n"); ShowMessage(" m: month\n"); ShowMessage(" j or d: day\n"); ShowMessage(" h: hour\n"); ShowMessage(" mn: minute\n"); ShowMessage(" s: second\n"); ShowMessage(" banadd testname +1m-2mn1s-6y\n"); ShowMessage(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); ShowMessage(" and 6 years at the same time.\n"); ladmin_log("No adjustment isn't an adjustment ('banadd' command).\n"); } return 137; } if (year > 127 || year < -127) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement d'années correct (de -127 à 127), svp.\n"); ladmin_log("Ajustement de l'année hors norme (commande 'banadd').\n"); } else { ShowMessage("Please give a correct adjustment for the years (from -127 to 127).\n"); ladmin_log("Abnormal adjustment for the year ('banadd' command).\n"); } return 137; } if (month > 255 || month < -255) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement de mois correct (de -255 à 255), svp.\n"); ladmin_log("Ajustement du mois hors norme (commande 'banadd').\n"); } else { ShowMessage("Please give a correct adjustment for the months (from -255 to 255).\n"); ladmin_log("Abnormal adjustment for the month ('banadd' command).\n"); } return 137; } if (day > 32767 || day < -32767) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n"); ladmin_log("Ajustement des jours hors norme (commande 'banadd').\n"); } else { ShowMessage("Please give a correct adjustment for the days (from -32767 to 32767).\n"); ladmin_log("Abnormal adjustment for the days ('banadd' command).\n"); } return 137; } if (hour > 32767 || hour < -32767) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n"); ladmin_log("Ajustement des heures hors norme (commande 'banadd').\n"); } else { ShowMessage("Please give a correct adjustment for the hours (from -32767 to 32767).\n"); ladmin_log("Abnormal adjustment for the hours ('banadd' command).\n"); } return 137; } if (minute > 32767 || minute < -32767) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n"); ladmin_log("Ajustement des minutes hors norme (commande 'banadd').\n"); } else { ShowMessage("Please give a correct adjustment for the minutes (from -32767 to 32767).\n"); ladmin_log("Abnormal adjustment for the minutes ('banadd' command).\n"); } return 137; } if (second > 32767 || second < -32767) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n"); ladmin_log("Ajustement des secondes hors norme (commande 'banadd').\n"); } else { ShowMessage("Please give a correct adjustment for the seconds (from -32767 to 32767).\n"); ladmin_log("Abnormal adjustment for the seconds ('banadd' command).\n"); } return 137; } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour modifier la date d'un bannissement.\n"); } else { ladmin_log("Request to login-server to modify a ban date/time.\n"); } WFIFOW(login_fd,0) = 0x794c; memcpy(WFIFOP(login_fd,2), name, 24); WFIFOW(login_fd,26) = (short)year; WFIFOW(login_fd,28) = (short)month; WFIFOW(login_fd,30) = (short)day; WFIFOW(login_fd,32) = (short)hour; WFIFOW(login_fd,34) = (short)minute; WFIFOW(login_fd,36) = (short)second; WFIFOSET(login_fd,38); bytes_to_read = 1; return 0; } //----------------------------------------------------------------------- // Sub-function of sub-function banaccount, unbanaccount or bansetaccount // Set the final date of a banishment of an account //----------------------------------------------------------------------- int bansetaccountsub(char* name, char* date, char* time) { int year, month, day, hour, minute, second; time_t ban_until_time; // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban) struct tm *tmtime; WFIFOHEAD(login_fd,30); year = month = day = hour = minute = second = 0; ban_until_time = 0; tmtime = localtime(&ban_until_time); // initialize if (verify_accountname(name) == 0) { return 102; } if (atoi(date) != 0 && ((sscanf(date, "%d/%d/%d", &year, &month, &day) < 3 && sscanf(date, "%d-%d-%d", &year, &month, &day) < 3 && sscanf(date, "%d.%d.%d", &year, &month, &day) < 3) || sscanf(time, "%d:%d:%d", &hour, &minute, &second) < 3)) { if (defaultlanguage == 'F') { ShowMessage("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n"); ShowMessage("Vous pouvez aussi mettre 0 à la place si vous utilisez la commande 'banset'.\n"); ladmin_log("Format incorrect pour la date/heure (commande'banset' ou 'ban').\n"); } else { ShowMessage("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n"); ShowMessage("You can imput 0 instead of if you use 'banset' command.\n"); ladmin_log("Invalid format for the date/time ('banset' or 'ban' command).\n"); } return 102; } if (atoi(date) == 0) { ban_until_time = 0; } else { if (year < 70) { year = year + 100; } if (year >= 1900) { year = year - 1900; } if (month < 1 || month > 12) { if (defaultlanguage == 'F') { ShowMessage("Entrez un mois correct svp (entre 1 et 12).\n"); ladmin_log("Mois incorrect pour la date (command 'banset' ou 'ban').\n"); } else { ShowMessage("Please give a correct value for the month (from 1 to 12).\n"); ladmin_log("Invalid month for the date ('banset' or 'ban' command).\n"); } return 102; } month = month - 1; if (day < 1 || day > 31) { if (defaultlanguage == 'F') { ShowMessage("Entrez un jour correct svp (entre 1 et 31).\n"); ladmin_log("Jour incorrect pour la date (command 'banset' ou 'ban').\n"); } else { ShowMessage("Please give a correct value for the day (from 1 to 31).\n"); ladmin_log("Invalid day for the date ('banset' or 'ban' command).\n"); } return 102; } if (((month == 3 || month == 5 || month == 8 || month == 10) && day > 30) || (month == 1 && day > 29)) { if (defaultlanguage == 'F') { ShowMessage("Entrez un jour correct en fonction du mois (%d) svp.\n", month); ladmin_log("Jour incorrect pour ce mois correspondant (command 'banset' ou 'ban').\n"); } else { ShowMessage("Please give a correct value for a day of this month (%d).\n", month); ladmin_log("Invalid day for this month ('banset' or 'ban' command).\n"); } return 102; } if (hour < 0 || hour > 23) { if (defaultlanguage == 'F') { ShowMessage("Entrez une heure correcte svp (entre 0 et 23).\n"); ladmin_log("Heure incorrecte pour l'heure (command 'banset' ou 'ban').\n"); } else { ShowMessage("Please give a correct value for the hour (from 0 to 23).\n"); ladmin_log("Invalid hour for the time ('banset' or 'ban' command).\n"); } return 102; } if (minute < 0 || minute > 59) { if (defaultlanguage == 'F') { ShowMessage("Entrez des minutes correctes svp (entre 0 et 59).\n"); ladmin_log("Minute incorrecte pour l'heure (command 'banset' ou 'ban').\n"); } else { ShowMessage("Please give a correct value for the minutes (from 0 to 59).\n"); ladmin_log("Invalid minute for the time ('banset' or 'ban' command).\n"); } return 102; } if (second < 0 || second > 59) { if (defaultlanguage == 'F') { ShowMessage("Entrez des secondes correctes svp (entre 0 et 59).\n"); ladmin_log("Seconde incorrecte pour l'heure (command 'banset' ou 'ban').\n"); } else { ShowMessage("Please give a correct value for the seconds (from 0 to 59).\n"); ladmin_log("Invalid second for the time ('banset' or 'ban' command).\n"); } return 102; } tmtime->tm_year = year; tmtime->tm_mon = month; tmtime->tm_mday = day; tmtime->tm_hour = hour; tmtime->tm_min = minute; tmtime->tm_sec = second; tmtime->tm_isdst = -1; // -1: no winter/summer time modification ban_until_time = mktime(tmtime); if (ban_until_time == -1) { if (defaultlanguage == 'F') { ShowMessage("Date incorrecte.\n"); ShowMessage("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n"); ShowMessage("Vous pouvez aussi mettre 0 à la place si vous utilisez la commande 'banset'.\n"); ladmin_log("Date incorrecte. (command 'banset' ou 'ban').\n"); } else { ShowMessage("Invalid date.\n"); ShowMessage("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n"); ShowMessage("You can imput 0 instead of if you use 'banset' command.\n"); ladmin_log("Invalid date. ('banset' or 'ban' command).\n"); } return 102; } } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour fixer un ban.\n"); } else { ladmin_log("Request to login-server to set a ban.\n"); } WFIFOW(login_fd,0) = 0x794a; memcpy(WFIFOP(login_fd,2), name, 24); WFIFOL(login_fd,26) = (int)ban_until_time; WFIFOSET(login_fd,30); bytes_to_read = 1; return 0; } //--------------------------------------------------------------------- // Sub-function: Set the final date of a banishment of an account (ban) //--------------------------------------------------------------------- int banaccount(char* param) { char name[1023], date[1023], time[1023]; memset(name, '\0', sizeof(name)); memset(date, '\0', sizeof(date)); memset(time, '\0', sizeof(time)); if (sscanf(param, "%s %s \"%[^\"]\"", date, time, name) < 3 && sscanf(param, "%s %s '%[^']'", date, time, name) < 3 && sscanf(param, "%s %s %[^\r\n]", date, time, name) < 3) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte, une date et une heure svp.\n"); ShowMessage(": banset aaaa/mm/jj [hh:mm:ss]\n"); ShowMessage(" banset 0 (0 = dé-bani)\n"); ShowMessage(" ban/banish aaaa/mm/jj hh:mm:ss \n"); ShowMessage(" unban/unbanish \n"); ShowMessage(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'banset' ou 'ban').\n"); } else { ShowMessage("Please input an account name, a date and a hour.\n"); ShowMessage(": banset yyyy/mm/dd [hh:mm:ss]\n"); ShowMessage(" banset 0 (0 = un-banished)\n"); ShowMessage(" ban/banish yyyy/mm/dd hh:mm:ss \n"); ShowMessage(" unban/unbanish \n"); ShowMessage(" Default time [hh:mm:ss]: 23:59:59.\n"); ladmin_log("Incomplete parameters to set a ban ('banset' or 'ban' command).\n"); } return 136; } return bansetaccountsub(name, date, time); } //------------------------------------------------------------------------ // Sub-function: Set the final date of a banishment of an account (banset) //------------------------------------------------------------------------ int bansetaccount(char* param) { char name[1023], date[1023], time[1023]; memset(name, '\0', sizeof(name)); memset(date, '\0', sizeof(date)); memset(time, '\0', sizeof(time)); if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void sscanf(param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void sscanf(param, "%s %s %[^\r\n]", name, date, time) < 2) { // if date = 0, time can be void if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte, une date et une heure svp.\n"); ShowMessage(": banset aaaa/mm/jj [hh:mm:ss]\n"); ShowMessage(" banset 0 (0 = dé-bani)\n"); ShowMessage(" ban/banish aaaa/mm/jj hh:mm:ss \n"); ShowMessage(" unban/unbanish \n"); ShowMessage(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'banset' ou 'ban').\n"); } else { ShowMessage("Please input an account name, a date and a hour.\n"); ShowMessage(": banset yyyy/mm/dd [hh:mm:ss]\n"); ShowMessage(" banset 0 (0 = un-banished)\n"); ShowMessage(" ban/banish yyyy/mm/dd hh:mm:ss \n"); ShowMessage(" unban/unbanish \n"); ShowMessage(" Default time [hh:mm:ss]: 23:59:59.\n"); ladmin_log("Incomplete parameters to set a ban ('banset' or 'ban' command).\n"); } return 136; } if (time[0] == '\0') strcpy(time, "23:59:59"); return bansetaccountsub(name, date, time); } //------------------------------------------------- // Sub-function: unbanishment of an account (unban) //------------------------------------------------- int unbanaccount(char* param) { char name[1023]; memset(name, '\0', sizeof(name)); if (strlen(param) == 0 || (sscanf(param, "\"%[^\"]\"", name) < 1 && sscanf(param, "'%[^']'", name) < 1 && sscanf(param, "%[^\r\n]", name) < 1) || strlen(name) == 0) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte svp.\n"); ShowMessage(": banset aaaa/mm/jj [hh:mm:ss]\n"); ShowMessage(" banset 0 (0 = dé-bani)\n"); ShowMessage(" ban/banish aaaa/mm/jj hh:mm:ss \n"); ShowMessage(" unban/unbanish \n"); ShowMessage(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); ladmin_log("Nombre incorrect de paramètres pour fixer un ban (commande 'unban').\n"); } else { ShowMessage("Please input an account name.\n"); ShowMessage(": banset yyyy/mm/dd [hh:mm:ss]\n"); ShowMessage(" banset 0 (0 = un-banished)\n"); ShowMessage(" ban/banish yyyy/mm/dd hh:mm:ss \n"); ShowMessage(" unban/unbanish \n"); ShowMessage(" Default time [hh:mm:ss]: 23:59:59.\n"); ladmin_log("Incomplete parameters to set a ban ('unban' command).\n"); } return 136; } return bansetaccountsub(name, "0", ""); } //--------------------------------------------------------- // Sub-function: Asking to check the validity of a password // (Note: never send back a password with login-server!! security of passwords) //--------------------------------------------------------- int checkaccount(char* param) { char name[1023], password[1023]; WFIFOHEAD(login_fd,50); memset(name, '\0', sizeof(name)); memset(password, '\0', sizeof(password)); if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 && // password can be void sscanf(param, "'%[^']' %[^\r\n]", name, password) < 1 && // password can be void sscanf(param, "%s %[^\r\n]", name, password) < 1) { // password can be void if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte svp.\n"); ShowMessage(" check testname motdepasse\n"); ladmin_log("Nombre incorrect de paramètres pour tester le mot d'un passe d'un compte (commande 'check').\n"); } else { ShowMessage("Please input an account name.\n"); ShowMessage(" check testname password\n"); ladmin_log("Incomplete parameters to check the password of an account ('check' command).\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } if (strlen(password) == 0) { if (typepasswd(password) == 0) return 134; } if (verify_password(password) == 0) return 131; if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour test un mot de passe.\n"); } else { ladmin_log("Request to login-server to check a password.\n"); } WFIFOW(login_fd,0) = 0x793a; memcpy(WFIFOP(login_fd,2), name, 24); memcpy(WFIFOP(login_fd,26), password, 24); WFIFOSET(login_fd,50); bytes_to_read = 1; return 0; } //------------------------------------------------ // Sub-function: Asking for deletion of an account //------------------------------------------------ int delaccount(char* param) { char name[1023]; char letter; char confirm[1023]; int i; WFIFOHEAD(login_fd,26); memset(name, '\0', sizeof(name)); if (strlen(param) == 0 || (sscanf(param, "\"%[^\"]\"", name) < 1 && sscanf(param, "'%[^']'", name) < 1 && sscanf(param, "%[^\r\n]", name) < 1) || strlen(name) == 0) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte svp.\n"); ShowMessage(" del nomtestasupprimer\n"); ladmin_log("Aucun nom donné pour supprimer un compte (commande 'delete').\n"); } else { ShowMessage("Please input an account name.\n"); ShowMessage(" del testnametodelete\n"); ladmin_log("No name given to delete an account ('delete' command).\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } memset(confirm, '\0', sizeof(confirm)); while ((confirm[0] != 'o' || defaultlanguage != 'F') && confirm[0] != 'n' && (confirm[0] != 'y' || defaultlanguage == 'F')) { if (defaultlanguage == 'F') ShowMessage("\033[1;36m ** Etes-vous vraiment sûr de vouloir SUPPRIMER le compte [$userid]? (o/n) > \033[0m"); else ShowMessage("\033[1;36m ** Are you really sure to DELETE account [$userid]? (y/n) > \033[0m"); fflush(stdout); memset(confirm, '\0', sizeof(confirm)); i = 0; while ((letter = getchar()) != '\n') confirm[i++] = letter; } if (confirm[0] == 'n') { if (defaultlanguage == 'F') { ShowMessage("Suppression annulée.\n"); ladmin_log("Suppression annulée par l'utilisateur (commande 'delete').\n"); } else { ShowMessage("Deletion canceled.\n"); ladmin_log("Deletion canceled by user ('delete' command).\n"); } return 121; } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour détruire un compte.\n"); } else { ladmin_log("Request to login-server to delete an acount.\n"); } WFIFOW(login_fd,0) = 0x7932; memcpy(WFIFOP(login_fd,2), name, 24); WFIFOSET(login_fd,26); bytes_to_read = 1; return 0; } //---------------------------------------------------------- // Sub-function: Asking to modification of an account e-mail //---------------------------------------------------------- int changeemail(char* param) { char name[1023], email[1023]; WFIFOHEAD(login_fd,66); memset(name, '\0', sizeof(name)); memset(email, '\0', sizeof(email)); if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, email) < 2 && sscanf(param, "'%[^']' %[^\r\n]", name, email) < 2 && sscanf(param, "%s %[^\r\n]", name, email) < 2) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte et une email svp.\n"); ShowMessage(" email testname nouveauemail\n"); ladmin_log("Nombre incorrect de paramètres pour changer l'email d'un compte (commande 'email').\n"); } else { ShowMessage("Please input an account name and an email.\n"); ShowMessage(" email testname newemail\n"); ladmin_log("Incomplete parameters to change the email of an account ('email' command).\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } if (strlen(email) < 3) { if (defaultlanguage == 'F') { ShowMessage("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email); ladmin_log("Email trop courte [%s]. Entrez une e-mail valide svp.\n", email); } else { ShowMessage("Email is too short [%s]. Please input a valid e-mail.\n", email); ladmin_log("Email is too short [%s]. Please input a valid e-mail.\n", email); } return 109; } if (strlen(email) > 39) { if (defaultlanguage == 'F') { ShowMessage("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n", email); ladmin_log("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n", email); } else { ShowMessage("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email); ladmin_log("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n", email); } return 109; } if (e_mail_check(email) == 0) { if (defaultlanguage == 'F') { ShowMessage("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email); ladmin_log("Email incorrecte [%s]. Entrez une e-mail valide svp.\n", email); } else { ShowMessage("Invalid email [%s]. Please input a valid e-mail.\n", email); ladmin_log("Invalid email [%s]. Please input a valid e-mail.\n", email); } return 109; } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour changer une email.\n"); } else { ladmin_log("Request to login-server to change an email.\n"); } WFIFOW(login_fd,0) = 0x7940; memcpy(WFIFOP(login_fd,2), name, 24); memcpy(WFIFOP(login_fd,26), email, 40); WFIFOSET(login_fd,66); bytes_to_read = 1; return 0; } //----------------------------------------------------- // Sub-function: Asking of the number of online players //----------------------------------------------------- int getlogincount(void) { WFIFOHEAD(login_fd,2); if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le nombre de joueurs en jeu.\n"); } else { ladmin_log("Request to login-server to obtain the # of online players.\n"); } WFIFOW(login_fd,0) = 0x7938; WFIFOSET(login_fd,2); bytes_to_read = 1; return 0; } //---------------------------------------------------------- // Sub-function: Asking to modify the GM level of an account //---------------------------------------------------------- int changegmlevel(char* param) { char name[1023]; int GM_level; WFIFOHEAD(login_fd,27); memset(name, '\0', sizeof(name)); GM_level = 0; if (sscanf(param, "\"%[^\"]\" %d", name, &GM_level) < 1 && sscanf(param, "'%[^']' %d", name, &GM_level) < 1 && sscanf(param, "%s %d", name, &GM_level) < 1) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte et un niveau de GM svp.\n"); ShowMessage(" gm nomtest 80\n"); ladmin_log("Nombre incorrect de paramètres pour changer le Niveau de GM d'un compte (commande 'gm').\n"); } else { ShowMessage("Please input an account name and a GM level.\n"); ShowMessage(" gm testname 80\n"); ladmin_log("Incomplete parameters to change the GM level of an account ('gm' command).\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } if (GM_level < 0 || GM_level > 99) { if (defaultlanguage == 'F') { ShowMessage("Niveau de GM incorrect [%d]. Entrez une valeur de 0 à 99 svp.\n", GM_level); ladmin_log("Niveau de GM incorrect [%d]. La valeur peut être de 0 à 99.\n", GM_level); } else { ShowMessage("Illegal GM level [%d]. Please input a value from 0 to 99.\n", GM_level); ladmin_log("Illegal GM level [%d]. The value can be from 0 to 99.\n", GM_level); } return 103; } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour changer un niveau de GM.\n"); } else { ladmin_log("Request to login-server to change a GM level.\n"); } WFIFOW(login_fd,0) = 0x793e; memcpy(WFIFOP(login_fd,2), name, 24); WFIFOB(login_fd,26) = GM_level; WFIFOSET(login_fd,27); bytes_to_read = 1; return 0; } //--------------------------------------------- // Sub-function: Asking to obtain an account id //--------------------------------------------- int idaccount(char* param) { char name[1023]; WFIFOHEAD(login_fd,26); memset(name, '\0', sizeof(name)); if (strlen(param) == 0 || (sscanf(param, "\"%[^\"]\"", name) < 1 && sscanf(param, "'%[^']'", name) < 1 && sscanf(param, "%[^\r\n]", name) < 1) || strlen(name) == 0) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte svp.\n"); ShowMessage(" id nomtest\n"); ladmin_log("Aucun nom donné pour rechecher l'id d'un compte (commande 'id').\n"); } else { ShowMessage("Please input an account name.\n"); ShowMessage(" id testname\n"); ladmin_log("No name given to search an account id ('id' command).\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour connaître l'id d'un compte.\n"); } else { ladmin_log("Request to login-server to know an account id.\n"); } WFIFOW(login_fd,0) = 0x7944; memcpy(WFIFOP(login_fd,2), name, 24); WFIFOSET(login_fd,26); bytes_to_read = 1; return 0; } //---------------------------------------------------------------------------- // Sub-function: Asking to displaying information about an account (by its id) //---------------------------------------------------------------------------- int infoaccount(int account_id) { WFIFOHEAD(login_fd,6); if (account_id < 0) { if (defaultlanguage == 'F') { ShowMessage("Entrez un id ayant une valeur positive svp.\n"); ladmin_log("Une valeur négative a été donné pour trouver le compte.\n"); } else { ShowMessage("Please input a positive value for the id.\n"); ladmin_log("Negative value was given to found the account.\n"); } return 136; } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le information d'un compte (par l'id).\n"); } else { ladmin_log("Request to login-server to obtain information about an account (by its id).\n"); } WFIFOW(login_fd,0) = 0x7954; WFIFOL(login_fd,2) = account_id; WFIFOSET(login_fd,6); bytes_to_read = 1; return 0; } //--------------------------------------- // Sub-function: Send a broadcast message //--------------------------------------- int sendbroadcast(short type, char* message) { int len = strlen(message); WFIFOHEAD(login_fd,9+len); if (len == 0) { if (defaultlanguage == 'F') { ShowMessage("Entrez un message svp.\n"); if (type == 0) { ShowMessage(" kami un message\n"); } else { ShowMessage(" kamib un message\n"); } ladmin_log("Le message est vide (commande 'kami(b)').\n"); } else { ShowMessage("Please input a message.\n"); if (type == 0) { ShowMessage(" kami a message\n"); } else { ShowMessage(" kamib a message\n"); } ladmin_log("The message is void ('kami(b)' command).\n"); } return 136; } len++; //+'\0' WFIFOW(login_fd,0) = 0x794e; WFIFOW(login_fd,2) = type; WFIFOL(login_fd,4) = len; memcpy(WFIFOP(login_fd,8), message, len); WFIFOSET(login_fd,8+len); bytes_to_read = 1; return 0; } //-------------------------------------------- // Sub-function: Change language of displaying //-------------------------------------------- int changelanguage(char* language) { if (strlen(language) == 0) { if (defaultlanguage == 'F') { ShowMessage("Entrez une langue svp.\n"); ShowMessage(" language english\n"); ShowMessage(" language français\n"); ladmin_log("La langue est vide (commande 'language').\n"); } else { ShowMessage("Please input a language.\n"); ShowMessage(" language english\n"); ShowMessage(" language français\n"); ladmin_log("The language is void ('language' command).\n"); } return 136; } language[0] = TOUPPER(language[0]); if (language[0] == 'F' || language[0] == 'E') { defaultlanguage = language[0]; if (defaultlanguage == 'F') { ShowMessage("Changement de la langue d'affichage en Français.\n"); ladmin_log("Changement de la langue d'affichage en Français.\n"); } else { ShowMessage("Displaying language changed to English.\n"); ladmin_log("Displaying language changed to English.\n"); } } else { if (defaultlanguage == 'F') { ShowMessage("Langue non paramétrée (langues possibles: 'Français' ou 'English').\n"); ladmin_log("Langue non paramétrée (Français ou English nécessaire).\n"); } else { ShowMessage("Undefined language (possible languages: Français or English).\n"); ladmin_log("Undefined language (must be Français or English).\n"); } } return 0; } //-------------------------------------------------------- // Sub-function: Asking to Displaying of the accounts list //-------------------------------------------------------- int listaccount(char* param, int type) { //int list_first, list_last, list_type; // parameter to display a list of accounts int i; WFIFOHEAD(login_fd,10); list_type = type; // set default values list_first = 0; list_last = 0; if (list_type == 1) { // if listgm // get all accounts = use default } else if (list_type == 2) { // if search for (i = 0; param[i]; i++) param[i] = TOLOWER(param[i]); // get all accounts = use default } else if (list_type == 3) { // if listban // get all accounts = use default } else if (list_type == 4) { // if listok // get all accounts = use default } else { // if list (list_type == 0) switch(sscanf(param, "%d %d", &list_first, &list_last)) { case 0: // get all accounts = use default break; case 1: list_last = 0; // use tests of the following value default: if (list_first < 0) list_first = 0; if (list_last < list_first || list_last < 0) list_last = 0; break; } } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour obtenir la liste des comptes de %d à %d.\n", list_first, list_last); } else { ladmin_log("Request to login-server to obtain the list of accounts from %d to %d.\n", list_first, list_last); } WFIFOW(login_fd,0) = 0x7920; WFIFOL(login_fd,2) = list_first; WFIFOL(login_fd,6) = list_last; WFIFOSET(login_fd,10); bytes_to_read = 1; // 0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567 if (defaultlanguage == 'F') { ShowMessage(" id_compte GM nom_utilisateur sexe count statut\n"); } else { ShowMessage("account_id GM user_name sex count state\n"); } ShowMessage("-------------------------------------------------------------------------------\n"); list_count = 0; return 0; } //-------------------------------------------- // Sub-function: Asking to modify a memo field //-------------------------------------------- int changememo(char* param) { char name[1023], memo[1023]; WFIFOHEAD(login_fd,28+255); memset(name, '\0', sizeof(name)); memset(memo, '\0', sizeof(memo)); if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, memo) < 1 && // memo can be void sscanf(param, "'%[^']' %[^\r\n]", name, memo) < 1 && // memo can be void sscanf(param, "%s %[^\r\n]", name, memo) < 1) { // memo can be void if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte et un mémo svp.\n"); ShowMessage(" memo nomtest nouveau memo\n"); ladmin_log("Nombre incorrect de paramètres pour changer le mémo d'un compte (commande 'email').\n"); } else { ShowMessage("Please input an account name and a memo.\n"); ShowMessage(" memo testname new memo\n"); ladmin_log("Incomplete parameters to change the memo of an account ('email' command).\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } if (strlen(memo) > 254) { if (defaultlanguage == 'F') { ShowMessage("Mémo trop long (%lu caractères).\n", (unsigned long)strlen(memo)); ShowMessage("Entrez un mémo de 254 caractères maximum svp.\n"); ladmin_log("Mémo trop long (%d caractères). Entrez un mémo de 254 caractères maximum svp.\n", strlen(memo)); } else { ShowMessage("Memo is too long (%lu characters).\n", (unsigned long)strlen(memo)); ShowMessage("Please input a memo of 254 bytes at the maximum.\n"); ladmin_log("Email is too long (%d characters). Please input a memo of 254 bytes at the maximum.\n", strlen(memo)); } return 102; } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour changer un mémo.\n"); } else { ladmin_log("Request to login-server to change a memo.\n"); } WFIFOW(login_fd,0) = 0x7942; memcpy(WFIFOP(login_fd,2), name, 24); WFIFOW(login_fd,26) = strlen(memo); if (strlen(memo) > 0) memcpy(WFIFOP(login_fd,28), memo, strlen(memo)); WFIFOSET(login_fd,28+strlen(memo)); bytes_to_read = 1; return 0; } //----------------------------------------------- // Sub-function: Asking to obtain an account name //----------------------------------------------- int nameaccount(int id) { WFIFOHEAD(login_fd,6); if (id < 0) { if (defaultlanguage == 'F') { ShowMessage("Entrez un id ayant une valeur positive svp.\n"); ladmin_log("Id négatif donné pour rechecher le nom d'un compte (commande 'name').\n"); } else { ShowMessage("Please input a positive value for the id.\n"); ladmin_log("Negativ id given to search an account name ('name' command).\n"); } return 136; } if (defaultlanguage == 'F') ladmin_log("Envoi d'un requête au serveur de logins pour connaître le nom d'un compte.\n"); else ladmin_log("Request to login-server to know an account name.\n"); WFIFOW(login_fd,0) = 0x7946; WFIFOL(login_fd,2) = id; WFIFOSET(login_fd,6); bytes_to_read = 1; return 0; } //------------------------------------------ // Sub-function: Asking to modify a password // (Note: never send back a password with login-server!! security of passwords) //------------------------------------------ int changepasswd(char* param) { char name[1023], password[1023]; WFIFOHEAD(login_fd,50); memset(name, '\0', sizeof(name)); memset(password, '\0', sizeof(password)); if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 && sscanf(param, "'%[^']' %[^\r\n]", name, password) < 1 && sscanf(param, "%s %[^\r\n]", name, password) < 1) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte svp.\n"); ShowMessage(" passwd nomtest nouveaumotdepasse\n"); ladmin_log("Nombre incorrect de paramètres pour changer le mot d'un passe d'un compte (commande 'password').\n"); } else { ShowMessage("Please input an account name.\n"); ShowMessage(" passwd testname newpassword\n"); ladmin_log("Incomplete parameters to change the password of an account ('password' command).\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } if (strlen(password) == 0) { if (typepasswd(password) == 0) return 134; } if (verify_password(password) == 0) return 131; if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour changer un mot de passe.\n"); } else { ladmin_log("Request to login-server to change a password.\n"); } WFIFOW(login_fd,0) = 0x7934; memcpy(WFIFOP(login_fd,2), name, 24); memcpy(WFIFOP(login_fd,26), password, 24); WFIFOSET(login_fd,50); bytes_to_read = 1; return 0; } //---------------------------------------------------------------------- // Sub-function: Request to login-server to reload GM configuration file // this function have no answer //---------------------------------------------------------------------- int reloadGM(void) { WFIFOHEAD(login_fd,2); WFIFOW(login_fd,0) = 0x7955; WFIFOSET(login_fd,2); bytes_to_read = 0; if (defaultlanguage == 'F') { ladmin_log("Demande de recharger le fichier de configuration des GM envoyée.\n"); ShowMessage("Demande de recharger le fichier de configuration des GM envoyée.\n"); ShowMessage("Vérifiez les comptes GM actuels (après rechargement):\n"); } else { ladmin_log("Request to reload the GM configuration file sended.\n"); ShowMessage("Request to reload the GM configuration file sended.\n"); ShowMessage("Check the actual GM accounts (after reloading):\n"); } listaccount(parameters, 1); // 1: to list only GM return 180; } //----------------------------------------------------- // Sub-function: Asking to modify the sex of an account //----------------------------------------------------- int changesex(char* param) { char name[1023], sex[1023]; WFIFOHEAD(login_fd,27); memset(name, '\0', sizeof(name)); memset(sex, '\0', sizeof(sex)); if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, sex) < 2 && sscanf(param, "'%[^']' %[^\r\n]", name, sex) < 2 && sscanf(param, "%s %[^\r\n]", name, sex) < 2) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte et un sexe svp.\n"); ShowMessage(" sex nomtest Male\n"); ladmin_log("Nombre incorrect de paramètres pour changer le sexe d'un compte (commande 'sex').\n"); } else { ShowMessage("Please input an account name and a sex.\n"); ShowMessage(" sex testname Male\n"); ladmin_log("Incomplete parameters to change the sex of an account ('sex' command).\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } sex[0] = TOUPPER(sex[0]); if (strchr("MF", sex[0]) == NULL) { if (defaultlanguage == 'F') { ShowMessage("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex); ladmin_log("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex); } else { ShowMessage("Illegal gender [%s]. Please input M or F.\n", sex); ladmin_log("Illegal gender [%s]. Please input M or F.\n", sex); } return 103; } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour changer un sexe.\n"); } else { ladmin_log("Request to login-server to change a sex.\n"); } WFIFOW(login_fd,0) = 0x793c; memcpy(WFIFOP(login_fd,2), name, 24); WFIFOB(login_fd,26) = sex[0]; WFIFOSET(login_fd,27); bytes_to_read = 1; return 0; } //------------------------------------------------------------------------- // Sub-function of sub-function changestate, blockaccount or unblockaccount // Asking to modify the state of an account //------------------------------------------------------------------------- int changestatesub(char* name, int state, char* error_message7) { char error_message[1023]; // need to use, because we can modify error_message7 WFIFOHEAD(login_fd,50); memset(error_message, '\0', sizeof(error_message)); strncpy(error_message, error_message7, sizeof(error_message)-1); if ((state < 0 || state > 9) && state != 100) { // Valid values: 0: ok, or value of the 0x006a packet + 1 if (defaultlanguage == 'F') { ShowMessage("Entrez une des statuts suivantes svp:\n"); ShowMessage(" 0 = Compte ok 6 = Your Game's EXE file is not the latest version\n"); } else { ShowMessage("Please input one of these states:\n"); ShowMessage(" 0 = Account ok 6 = Your Game's EXE file is not the latest version\n"); } ShowMessage(" 1 = Unregistered ID 7 = You are Prohibited to log in until + message\n"); ShowMessage(" 2 = Incorrect Password 8 = Server is jammed due to over populated\n"); ShowMessage(" 3 = This ID is expired 9 = No MSG\n"); ShowMessage(" 4 = Rejected from Server 100 = This ID has been totally erased\n"); ShowMessage(" 5 = You have been blocked by the GM Team\n"); if (defaultlanguage == 'F') { ShowMessage(" state nomtest 5\n"); ShowMessage(" state nomtest 7 fin de votre ban\n"); ShowMessage(" block \n"); ShowMessage(" unblock \n"); ladmin_log("Valeur incorrecte pour le statut d'un compte (commande 'state', 'block' ou 'unblock').\n"); } else { ShowMessage(" state testname 5\n"); ShowMessage(" state testname 7 end of your ban\n"); ShowMessage(" block \n"); ShowMessage(" unblock \n"); ladmin_log("Invalid value for the state of an account ('state', 'block' or 'unblock' command).\n"); } return 151; } if (verify_accountname(name) == 0) { return 102; } if (state != 7) { strcpy(error_message, "-"); } else { if (strlen(error_message) < 1) { if (defaultlanguage == 'F') { ShowMessage("Message d'erreur trop court. Entrez un message de 1-19 caractères.\n"); ladmin_log("Message d'erreur trop court. Entrez un message de 1-19 caractères.\n"); } else { ShowMessage("Error message is too short. Please input a message of 1-19 bytes.\n"); ladmin_log("Error message is too short. Please input a message of 1-19 bytes.\n"); } return 102; } if (strlen(error_message) > 19) { if (defaultlanguage == 'F') { ShowMessage("Message d'erreur trop long. Entrez un message de 1-19 caractères.\n"); ladmin_log("Message d'erreur trop long. Entrez un message de 1-19 caractères.\n"); } else { ShowMessage("Error message is too long. Please input a message of 1-19 bytes.\n"); ladmin_log("Error message is too long. Please input a message of 1-19 bytes.\n"); } return 102; } } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour changer un statut.\n"); } else { ladmin_log("Request to login-server to change a state.\n"); } WFIFOW(login_fd,0) = 0x7936; memcpy(WFIFOP(login_fd,2), name, 24); WFIFOL(login_fd,26) = state; memcpy(WFIFOP(login_fd,30), error_message, 20); WFIFOSET(login_fd,50); bytes_to_read = 1; return 0; } //------------------------------------------------------- // Sub-function: Asking to modify the state of an account //------------------------------------------------------- int changestate(char* param) { char name[1023], error_message[1023]; int state; memset(name, '\0', sizeof(name)); memset(error_message, '\0', sizeof(error_message)); if (sscanf(param, "\"%[^\"]\" %d %[^\r\n]", name, &state, error_message) < 2 && sscanf(param, "'%[^']' %d %[^\r\n]", name, &state, error_message) < 2 && sscanf(param, "%s %d %[^\r\n]", name, &state, error_message) < 2) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte et un statut svp.\n"); ShowMessage(" state nomtest 5\n"); ShowMessage(" state nomtest 7 fin de votre ban\n"); ShowMessage(" block \n"); ShowMessage(" unblock \n"); ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'state').\n"); } else { ShowMessage("Please input an account name and a state.\n"); ShowMessage(" state testname 5\n"); ShowMessage(" state testname 7 end of your ban\n"); ShowMessage(" block \n"); ShowMessage(" unblock \n"); ladmin_log("Incomplete parameters to change the state of an account ('state' command).\n"); } return 136; } return changestatesub(name, state, error_message); } //------------------------------------------- // Sub-function: Asking to unblock an account //------------------------------------------- int unblockaccount(char* param) { char name[1023]; memset(name, '\0', sizeof(name)); if (strlen(param) == 0 || (sscanf(param, "\"%[^\"]\"", name) < 1 && sscanf(param, "'%[^']'", name) < 1 && sscanf(param, "%[^\r\n]", name) < 1) || strlen(name) == 0) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte svp.\n"); ShowMessage(" state nomtest 5\n"); ShowMessage(" state nomtest 7 fin de votre ban\n"); ShowMessage(" block \n"); ShowMessage(" unblock \n"); ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'unblock').\n"); } else { ShowMessage("Please input an account name.\n"); ShowMessage(" state testname 5\n"); ShowMessage(" state testname 7 end of your ban\n"); ShowMessage(" block \n"); ShowMessage(" unblock \n"); ladmin_log("Incomplete parameters to change the state of an account ('unblock' command).\n"); } return 136; } return changestatesub(name, 0, "-"); // state 0, no error message } //------------------------------------------- // Sub-function: Asking to unblock an account //------------------------------------------- int blockaccount(char* param) { char name[1023]; memset(name, '\0', sizeof(name)); if (strlen(param) == 0 || (sscanf(param, "\"%[^\"]\"", name) < 1 && sscanf(param, "'%[^']'", name) < 1 && sscanf(param, "%[^\r\n]", name) < 1) || strlen(name) == 0) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte svp.\n"); ShowMessage(" state nomtest 5\n"); ShowMessage(" state nomtest 7 fin de votre ban\n"); ShowMessage(" block \n"); ShowMessage(" unblock \n"); ladmin_log("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'block').\n"); } else { ShowMessage("Please input an account name.\n"); ShowMessage(" state testname 5\n"); ShowMessage(" state testname 7 end of your ban\n"); ShowMessage(" block \n"); ShowMessage(" unblock \n"); ladmin_log("Incomplete parameters to change the state of an account ('block' command).\n"); } return 136; } return changestatesub(name, 5, "-"); // state 5, no error message } //--------------------------------------------------------------------- // Sub-function: Add/substract time to the validity limit of an account //--------------------------------------------------------------------- int timeaddaccount(char* param) { char name[1023], modif[1023]; int year, month, day, hour, minute, second; char * p_modif; int value, i; WFIFOHEAD(login_fd,38); memset(name, '\0', sizeof(name)); memset(modif, '\0', sizeof(modif)); year = month = day = hour = minute = second = 0; if (sscanf(param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 && sscanf(param, "'%[^']' %[^\r\n]", name, modif) < 2 && sscanf(param, "%s %[^\r\n]", name, modif) < 2) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte et un modificateur svp.\n"); ShowMessage(" timeadd nomtest +1m-2mn1s-6y\n"); ShowMessage(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); ShowMessage(" et 6 ans dans le même temps.\n"); ladmin_log("Nombre incorrect de paramètres pour modifier une date limite d'utilisation (commande 'timeadd').\n"); } else { ShowMessage("Please input an account name and a modifier.\n"); ShowMessage(" : timeadd testname +1m-2mn1s-6y\n"); ShowMessage(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); ShowMessage(" and 6 years at the same time.\n"); ladmin_log("Incomplete parameters to modify a limit time ('timeadd' command).\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } // lowercase for modif for (i = 0; modif[i]; i++) modif[i] = TOLOWER(modif[i]); p_modif = modif; while (strlen(p_modif) > 0) { value = atoi(p_modif); if (value == 0) { p_modif++; } else { if (p_modif[0] == '-' || p_modif[0] == '+') p_modif++; while (strlen(p_modif) > 0 && p_modif[0] >= '0' && p_modif[0] <= '9') { p_modif++; } if (p_modif[0] == 's') { second = value; p_modif++; } else if (p_modif[0] == 'm' && p_modif[1] == 'n') { minute = value; p_modif += 2; } else if (p_modif[0] == 'h') { hour = value; p_modif++; } else if (p_modif[0] == 'd' || p_modif[0] == 'j') { day = value; p_modif += 2; } else if (p_modif[0] == 'm') { month = value; p_modif++; } else if (p_modif[0] == 'y' || p_modif[0] == 'a') { year = value; p_modif++; } else { p_modif++; } } } if (defaultlanguage == 'F') { ShowMessage(" année: %d\n", year); ShowMessage(" mois: %d\n", month); ShowMessage(" jour: %d\n", day); ShowMessage(" heure: %d\n", hour); ShowMessage(" minute: %d\n", minute); ShowMessage(" seconde: %d\n", second); } else { ShowMessage(" year: %d\n", year); ShowMessage(" month: %d\n", month); ShowMessage(" day: %d\n", day); ShowMessage(" hour: %d\n", hour); ShowMessage(" minute: %d\n", minute); ShowMessage(" second: %d\n", second); } if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0 && second == 0) { if (defaultlanguage == 'F') { ShowMessage("Vous devez entrer un ajustement avec cette commande, svp:\n"); ShowMessage(" Valeur d'ajustement (-1, 1, +1, etc...)\n"); ShowMessage(" Elément modifié:\n"); ShowMessage(" a ou y: année\n"); ShowMessage(" m: mois\n"); ShowMessage(" j ou d: jour\n"); ShowMessage(" h: heure\n"); ShowMessage(" mn: minute\n"); ShowMessage(" s: seconde\n"); ShowMessage(" timeadd nomtest +1m-2mn1s-6y\n"); ShowMessage(" Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n"); ShowMessage(" et 6 ans dans le même temps.\n"); ladmin_log("Aucun ajustement n'est pas un ajustement (commande 'timeadd').\n"); } else { ShowMessage("Please give an adjustment with this command:\n"); ShowMessage(" Adjustment value (-1, 1, +1, etc...)\n"); ShowMessage(" Modified element:\n"); ShowMessage(" a or y: year\n"); ShowMessage(" m: month\n"); ShowMessage(" j or d: day\n"); ShowMessage(" h: hour\n"); ShowMessage(" mn: minute\n"); ShowMessage(" s: second\n"); ShowMessage(" timeadd testname +1m-2mn1s-6y\n"); ShowMessage(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); ShowMessage(" and 6 years at the same time.\n"); ladmin_log("No adjustment isn't an adjustment ('timeadd' command).\n"); } return 137; } if (year > 127 || year < -127) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement d'années correct (de -127 à 127), svp.\n"); ladmin_log("Ajustement de l'année hors norme ('timeadd' command).\n"); } else { ShowMessage("Please give a correct adjustment for the years (from -127 to 127).\n"); ladmin_log("Abnormal adjustment for the year ('timeadd' command).\n"); } return 137; } if (month > 255 || month < -255) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement de mois correct (de -255 à 255), svp.\n"); ladmin_log("Ajustement du mois hors norme ('timeadd' command).\n"); } else { ShowMessage("Please give a correct adjustment for the months (from -255 to 255).\n"); ladmin_log("Abnormal adjustment for the month ('timeadd' command).\n"); } return 137; } if (day > 32767 || day < -32767) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n"); ladmin_log("Ajustement des jours hors norme ('timeadd' command).\n"); } else { ShowMessage("Please give a correct adjustment for the days (from -32767 to 32767).\n"); ladmin_log("Abnormal adjustment for the days ('timeadd' command).\n"); } return 137; } if (hour > 32767 || hour < -32767) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n"); ladmin_log("Ajustement des heures hors norme ('timeadd' command).\n"); } else { ShowMessage("Please give a correct adjustment for the hours (from -32767 to 32767).\n"); ladmin_log("Abnormal adjustment for the hours ('timeadd' command).\n"); } return 137; } if (minute > 32767 || minute < -32767) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n"); ladmin_log("Ajustement des minutes hors norme ('timeadd' command).\n"); } else { ShowMessage("Please give a correct adjustment for the minutes (from -32767 to 32767).\n"); ladmin_log("Abnormal adjustment for the minutes ('timeadd' command).\n"); } return 137; } if (second > 32767 || second < -32767) { if (defaultlanguage == 'F') { ShowMessage("Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n"); ladmin_log("Ajustement des secondes hors norme ('timeadd' command).\n"); } else { ShowMessage("Please give a correct adjustment for the seconds (from -32767 to 32767).\n"); ladmin_log("Abnormal adjustment for the seconds ('timeadd' command).\n"); } return 137; } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour modifier une date limite d'utilisation.\n"); } else { ladmin_log("Request to login-server to modify a time limit.\n"); } WFIFOW(login_fd,0) = 0x7950; memcpy(WFIFOP(login_fd,2), name, 24); WFIFOW(login_fd,26) = (short)year; WFIFOW(login_fd,28) = (short)month; WFIFOW(login_fd,30) = (short)day; WFIFOW(login_fd,32) = (short)hour; WFIFOW(login_fd,34) = (short)minute; WFIFOW(login_fd,36) = (short)second; WFIFOSET(login_fd,38); bytes_to_read = 1; return 0; } //------------------------------------------------- // Sub-function: Set a validity limit of an account //------------------------------------------------- int timesetaccount(char* param) { char name[1023], date[1023], time[1023]; int year, month, day, hour, minute, second; time_t connect_until_time; // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited) struct tm *tmtime; WFIFOHEAD(login_fd,30); memset(name, '\0', sizeof(name)); memset(date, '\0', sizeof(date)); memset(time, '\0', sizeof(time)); year = month = day = hour = minute = second = 0; connect_until_time = 0; tmtime = localtime(&connect_until_time); // initialize if (sscanf(param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void sscanf(param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 && // if date = 0, time can be void sscanf(param, "%s %s %[^\r\n]", name, date, time) < 2) { // if date = 0, time can be void if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte, une date et une heure svp.\n"); ShowMessage(": timeset aaaa/mm/jj [hh:mm:ss]\n"); ShowMessage(" timeset 0 (0 = illimité)\n"); ShowMessage(" Heure par défaut [hh:mm:ss]: 23:59:59.\n"); ladmin_log("Nombre incorrect de paramètres pour fixer une date limite d'utilisation (commande 'timeset').\n"); } else { ShowMessage("Please input an account name, a date and a hour.\n"); ShowMessage(": timeset yyyy/mm/dd [hh:mm:ss]\n"); ShowMessage(" timeset 0 (0 = unlimited)\n"); ShowMessage(" Default time [hh:mm:ss]: 23:59:59.\n"); ladmin_log("Incomplete parameters to set a limit time ('timeset' command).\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } if (time[0] == '\0') strcpy(time, "23:59:59"); if (atoi(date) != 0 && ((sscanf(date, "%d/%d/%d", &year, &month, &day) < 3 && sscanf(date, "%d-%d-%d", &year, &month, &day) < 3 && sscanf(date, "%d.%d.%d", &year, &month, &day) < 3 && sscanf(date, "%d'%d'%d", &year, &month, &day) < 3) || sscanf(time, "%d:%d:%d", &hour, &minute, &second) < 3)) { if (defaultlanguage == 'F') { ShowMessage("Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n"); ladmin_log("Format incorrect pour la date/heure ('timeset' command).\n"); } else { ShowMessage("Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"); ladmin_log("Invalid format for the date/time ('timeset' command).\n"); } return 102; } if (atoi(date) == 0) { connect_until_time = 0; } else { if (year < 70) { year = year + 100; } if (year >= 1900) { year = year - 1900; } if (month < 1 || month > 12) { if (defaultlanguage == 'F') { ShowMessage("Entrez un mois correct svp (entre 1 et 12).\n"); ladmin_log("Mois incorrect pour la date ('timeset' command).\n"); } else { ShowMessage("Please give a correct value for the month (from 1 to 12).\n"); ladmin_log("Invalid month for the date ('timeset' command).\n"); } return 102; } month = month - 1; if (day < 1 || day > 31) { if (defaultlanguage == 'F') { ShowMessage("Entrez un jour correct svp (entre 1 et 31).\n"); ladmin_log("Jour incorrect pour la date ('timeset' command).\n"); } else { ShowMessage("Please give a correct value for the day (from 1 to 31).\n"); ladmin_log("Invalid day for the date ('timeset' command).\n"); } return 102; } if (((month == 3 || month == 5 || month == 8 || month == 10) && day > 30) || (month == 1 && day > 29)) { if (defaultlanguage == 'F') { ShowMessage("Entrez un jour correct en fonction du mois (%d) svp.\n", month); ladmin_log("Jour incorrect pour ce mois correspondant ('timeset' command).\n"); } else { ShowMessage("Please give a correct value for a day of this month (%d).\n", month); ladmin_log("Invalid day for this month ('timeset' command).\n"); } return 102; } if (hour < 0 || hour > 23) { if (defaultlanguage == 'F') { ShowMessage("Entrez une heure correcte svp (entre 0 et 23).\n"); ladmin_log("Heure incorrecte pour l'heure ('timeset' command).\n"); } else { ShowMessage("Please give a correct value for the hour (from 0 to 23).\n"); ladmin_log("Invalid hour for the time ('timeset' command).\n"); } return 102; } if (minute < 0 || minute > 59) { if (defaultlanguage == 'F') { ShowMessage("Entrez des minutes correctes svp (entre 0 et 59).\n"); ladmin_log("Minute incorrecte pour l'heure ('timeset' command).\n"); } else { ShowMessage("Please give a correct value for the minutes (from 0 to 59).\n"); ladmin_log("Invalid minute for the time ('timeset' command).\n"); } return 102; } if (second < 0 || second > 59) { if (defaultlanguage == 'F') { ShowMessage("Entrez des secondes correctes svp (entre 0 et 59).\n"); ladmin_log("Seconde incorrecte pour l'heure ('timeset' command).\n"); } else { ShowMessage("Please give a correct value for the seconds (from 0 to 59).\n"); ladmin_log("Invalid second for the time ('timeset' command).\n"); } return 102; } tmtime->tm_year = year; tmtime->tm_mon = month; tmtime->tm_mday = day; tmtime->tm_hour = hour; tmtime->tm_min = minute; tmtime->tm_sec = second; tmtime->tm_isdst = -1; // -1: no winter/summer time modification connect_until_time = mktime(tmtime); if (connect_until_time == -1) { if (defaultlanguage == 'F') { ShowMessage("Date incorrecte.\n"); ShowMessage("Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n"); ladmin_log("Date incorrecte. ('timeset' command).\n"); } else { ShowMessage("Invalid date.\n"); ShowMessage("Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"); ladmin_log("Invalid date. ('timeset' command).\n"); } return 102; } } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour fixer une date limite d'utilisation.\n"); } else { ladmin_log("Request to login-server to set a time limit.\n"); } WFIFOW(login_fd,0) = 0x7948; memcpy(WFIFOP(login_fd,2), name, 24); WFIFOL(login_fd,26) = (int)connect_until_time; WFIFOSET(login_fd,30); bytes_to_read = 1; return 0; } //------------------------------------------------------------------------------ // Sub-function: Asking to displaying information about an account (by its name) //------------------------------------------------------------------------------ int whoaccount(char* param) { char name[1023]; WFIFOHEAD(login_fd,26); memset(name, '\0', sizeof(name)); if (strlen(param) == 0 || (sscanf(param, "\"%[^\"]\"", name) < 1 && sscanf(param, "'%[^']'", name) < 1 && sscanf(param, "%[^\r\n]", name) < 1) || strlen(name) == 0) { if (defaultlanguage == 'F') { ShowMessage("Entrez un nom de compte svp.\n"); ShowMessage(" who nomtest\n"); ladmin_log("Aucun nom n'a été donné pour trouver le compte.\n"); } else { ShowMessage("Please input an account name.\n"); ShowMessage(" who testname\n"); ladmin_log("No name was given to found the account.\n"); } return 136; } if (verify_accountname(name) == 0) { return 102; } if (defaultlanguage == 'F') { ladmin_log("Envoi d'un requête au serveur de logins pour obtenir le information d'un compte (par le nom).\n"); } else { ladmin_log("Request to login-server to obtain information about an account (by its name).\n"); } WFIFOW(login_fd,0) = 0x7952; memcpy(WFIFOP(login_fd,2), name, 24); WFIFOSET(login_fd,26); bytes_to_read = 1; return 0; } //-------------------------------------------------------- // Sub-function: Asking of the version of the login-server //-------------------------------------------------------- int checkloginversion(void) { WFIFOHEAD(login_fd,2); if (defaultlanguage == 'F') ladmin_log("Envoi d'un requête au serveur de logins pour obtenir sa version.\n"); else ladmin_log("Request to login-server to obtain its version.\n"); WFIFOW(login_fd,0) = 0x7530; WFIFOSET(login_fd,2); bytes_to_read = 1; return 0; } //--------------------------------------------- // Prompt function // this function wait until user type a command // and analyse the command. //--------------------------------------------- int prompt(void) { int i, j; char buf[1024]; char *p; // while we don't wait new packets while (bytes_to_read == 0) { // for help with the console colors look here: // http://www.edoceo.com/liberum/?doc=printf-with-color // some code explanation (used here): // \033[2J : clear screen and go up/left (0, 0 position) // \033[K : clear line from actual position to end of the line // \033[0m : reset color parameter // \033[1m : use bold for font ShowMessage("\n"); if (defaultlanguage == 'F') ShowMessage("\033[32mPour afficher les commandes, tapez 'Entrée'.\033[0m\n"); else ShowMessage("\033[32mTo list the commands, type 'enter'.\033[0m\n"); ShowMessage("\033[0;36mLadmin-> \033[0m"); ShowMessage("\033[1m"); fflush(stdout); // get command and parameter memset(buf, '\0', sizeof(buf)); fflush(stdin); fgets(buf, sizeof(buf), stdin); ShowMessage("\033[0m"); fflush(stdout); // remove final \n if((p = strrchr(buf, '\n')) != NULL) p[0] = '\0'; // remove all control char for (i = 0; buf[i]; i++) if (buf[i] < 32) { // remove cursor control. if (buf[i] == 27 && buf[i+1] == '[' && (buf[i+2] == 'H' || // home position (cursor) buf[i+2] == 'J' || // clear screen buf[i+2] == 'A' || // up 1 line buf[i+2] == 'B' || // down 1 line buf[i+2] == 'C' || // right 1 position buf[i+2] == 'D' || // left 1 position buf[i+2] == 'G')) { // center cursor (windows) for (j = i; buf[j]; j++) buf[j] = buf[j+3]; } else if (buf[i] == 27 && buf[i+1] == '[' && buf[i+2] == '2' && buf[i+3] == 'J') { // clear screen for (j = i; buf[j]; j++) buf[j] = buf[j+4]; } else if (buf[i] == 27 && buf[i+1] == '[' && buf[i+3] == '~' && (buf[i+2] == '1' || // home (windows) buf[i+2] == '2' || // insert (windows) buf[i+2] == '3' || // del (windows) buf[i+2] == '4' || // end (windows) buf[i+2] == '5' || // pgup (windows) buf[i+2] == '6')) { // pgdown (windows) for (j = i; buf[j]; j++) buf[j] = buf[j+4]; } else { // remove other control char. for (j = i; buf[j]; j++) buf[j] = buf[j+1]; } i--; } // extract command name and parameters memset(command, '\0', sizeof(command)); memset(parameters, '\0', sizeof(parameters)); sscanf(buf, "%1023s %[^\n]", command, parameters); command[1023] = '\0'; parameters[1023] = '\0'; // lowercase for command line for (i = 0; command[i]; i++) command[i] = TOLOWER(command[i]); if (command[0] == '?' || strlen(command) == 0) { if (defaultlanguage == 'F') { strcpy(buf, "aide"); strcpy(command, "aide"); } else { strcpy(buf, "help"); strcpy(command, "help"); } } // Analyse of the command check_command(command); // give complete name to the command if (strlen(parameters) == 0) { if (defaultlanguage == 'F') { ladmin_log("Commande: '%s' (sans paramètre)\n", command, parameters); } else { ladmin_log("Command: '%s' (without parameters)\n", command, parameters); } } else { if (defaultlanguage == 'F') { ladmin_log("Commande: '%s', paramètres: '%s'\n", command, parameters); } else { ladmin_log("Command: '%s', parameters: '%s'\n", command, parameters); } } // Analyse of the command // help if (strcmp(command, "aide") == 0) { display_help(parameters, 1); // 1: french } else if (strcmp(command, "help") == 0 ) { display_help(parameters, 0); // 0: english // general commands } else if (strcmp(command, "add") == 0) { addaccount(parameters, 0); // 0: no email } else if (strcmp(command, "ban") == 0) { banaccount(parameters); } else if (strcmp(command, "banadd") == 0) { banaddaccount(parameters); } else if (strcmp(command, "banset") == 0) { bansetaccount(parameters); } else if (strcmp(command, "block") == 0) { blockaccount(parameters); } else if (strcmp(command, "check") == 0) { checkaccount(parameters); } else if (strcmp(command, "create") == 0) { addaccount(parameters, 1); // 1: with email } else if (strcmp(command, "delete") == 0) { delaccount(parameters); } else if (strcmp(command, "email") == 0) { changeemail(parameters); } else if (strcmp(command, "getcount") == 0) { getlogincount(); } else if (strcmp(command, "gm") == 0) { changegmlevel(parameters); } else if (strcmp(command, "id") == 0) { idaccount(parameters); } else if (strcmp(command, "info") == 0) { infoaccount(atoi(parameters)); } else if (strcmp(command, "kami") == 0) { sendbroadcast(0, parameters); // flag for normal } else if (strcmp(command, "kamib") == 0) { sendbroadcast(0x10, parameters); // flag for blue } else if (strcmp(command, "language") == 0) { changelanguage(parameters); } else if (strcmp(command, "list") == 0) { listaccount(parameters, 0); // 0: to list all } else if (strcmp(command, "listban") == 0) { listaccount(parameters, 3); // 3: to list only accounts with state or bannished } else if (strcmp(command, "listgm") == 0) { listaccount(parameters, 1); // 1: to list only GM } else if (strcmp(command, "listok") == 0) { listaccount(parameters, 4); // 4: to list only accounts without state and not bannished } else if (strcmp(command, "memo") == 0) { changememo(parameters); } else if (strcmp(command, "name") == 0) { nameaccount(atoi(parameters)); } else if (strcmp(command, "password") == 0) { changepasswd(parameters); } else if (strcmp(command, "reloadgm") == 0) { reloadGM(); } else if (strcmp(command, "search") == 0) { // no regex in C version listaccount(parameters, 2); // 2: to list with pattern } else if (strcmp(command, "sex") == 0) { changesex(parameters); } else if (strcmp(command, "state") == 0) { changestate(parameters); } else if (strcmp(command, "timeadd") == 0) { timeaddaccount(parameters); } else if (strcmp(command, "timeset") == 0) { timesetaccount(parameters); } else if (strcmp(command, "unban") == 0) { unbanaccount(parameters); } else if (strcmp(command, "unblock") == 0) { unblockaccount(parameters); } else if (strcmp(command, "version") == 0) { checkloginversion(); } else if (strcmp(command, "who") == 0) { whoaccount(parameters); // quit } else if (strcmp(command, "quit") == 0 || strcmp(command, "exit") == 0 || strcmp(command, "end") == 0) { if (defaultlanguage == 'F') { ShowMessage("Au revoir.\n"); } else { ShowMessage("Bye.\n"); } exit(0); // unknown command } else { if (defaultlanguage == 'F') { ShowMessage("Commande inconnue [%s].\n", buf); ladmin_log("Commande inconnue [%s].\n", buf); } else { ShowMessage("Unknown command [%s].\n", buf); ladmin_log("Unknown command [%s].\n", buf); } } } return 0; } //------------------------------------------------------------- // Function: Parse receiving informations from the login-server //------------------------------------------------------------- int parse_fromlogin(int fd) { struct char_session_data *sd; int id; RFIFOHEAD(fd); if (session[fd]->eof) { if (defaultlanguage == 'F') { ShowMessage("Impossible de se connecter au serveur de login [%s:%d] !\n", loginserverip, loginserverport); ladmin_log("Impossible de se connecter au serveur de login [%s:%d] !\n", loginserverip, loginserverport); } else { ShowMessage("Impossible to have a connection with the login-server [%s:%d] !\n", loginserverip, loginserverport); ladmin_log("Impossible to have a connection with the login-server [%s:%d] !\n", loginserverip, loginserverport); } do_close(fd); exit (0); } // ShowMessage("parse_fromlogin : %d %d %d\n", fd, RFIFOREST(fd), RFIFOW(fd,0)); sd = (struct char_session_data*)session[fd]->session_data; while(RFIFOREST(fd) >= 2) { switch(RFIFOW(fd,0)) { case 0x7919: // answer of a connection request if (RFIFOREST(fd) < 3) return 0; if (RFIFOB(fd,2) != 0) { if (defaultlanguage == 'F') { ShowMessage("Erreur de login:\n"); ShowMessage(" - mot de passe incorrect,\n"); ShowMessage(" - système d'administration non activé, ou\n"); ShowMessage(" - IP non autorisée.\n"); ladmin_log("Erreur de login: mot de passe incorrect, système d'administration non activé, ou IP non autorisée.\n"); } else { ShowMessage("Error at login:\n"); ShowMessage(" - incorrect password,\n"); ShowMessage(" - administration system not activated, or\n"); ShowMessage(" - unauthorised IP.\n"); ladmin_log("Error at login: incorrect password, administration system not activated, or unauthorised IP.\n"); } set_eof(fd); //bytes_to_read = 1; // not stop at prompt return 0; } else { if (defaultlanguage == 'F') { ShowMessage("Connexion établie.\n"); ladmin_log("Connexion établie.\n"); ShowMessage("Lecture de la version du serveur de login...\n"); ladmin_log("Lecture de la version du serveur de login...\n"); } else { ShowMessage("Established connection.\n"); ladmin_log("Established connection.\n"); ShowMessage("Reading of the version of the login-server...\n"); ladmin_log("Reading of the version of the login-server...\n"); } //bytes_to_read = 1; // unchanged checkloginversion(); } RFIFOSKIP(fd,3); break; case 0x01dc: // answer of a coding key request if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2)) return 0; { char md5str[64] = "", md5bin[32]; WFIFOHEAD(login_fd, 20); if (passenc == 1) { strncpy(md5str, (const char*)RFIFOP(fd,4), RFIFOW(fd,2) - 4); strcat(md5str, loginserveradminpassword); } else if (passenc == 2) { strncpy(md5str, loginserveradminpassword, sizeof(loginserveradminpassword)); strcat(md5str, (const char*)RFIFOP(fd,4)); } MD5_String2binary(md5str, md5bin); WFIFOW(login_fd,0) = 0x7918; // Request for administation login (encrypted password) WFIFOW(login_fd,2) = passenc; // Encrypted type memcpy(WFIFOP(login_fd,4), md5bin, 16); WFIFOSET(login_fd,20); if (defaultlanguage == 'F') { ShowMessage("Réception de la clef MD5.\n"); ladmin_log("Réception de la clef MD5.\n"); ShowMessage("Envoi du mot de passe crypté...\n"); ladmin_log("Envoi du mot de passe crypté...\n"); } else { ShowMessage("Receiving of the MD5 key.\n"); ladmin_log("Receiving of the MD5 key.\n"); ShowMessage("Sending of the encrypted password...\n"); ladmin_log("Sending of the encrypted password...\n"); } } bytes_to_read = 1; RFIFOSKIP(fd,RFIFOW(fd,2)); break; case 0x7531: // Displaying of the version of the login-server if (RFIFOREST(fd) < 10) return 0; ShowMessage(" Login-Server [%s:%d]\n", loginserverip, loginserverport); if (((int)RFIFOB(login_fd,5)) == 0) { ShowMessage(" eAthena version stable-%d.%d", (int)RFIFOB(login_fd,2), (int)RFIFOB(login_fd,3)); } else { ShowMessage(" eAthena version dev-%d.%d", (int)RFIFOB(login_fd,2), (int)RFIFOB(login_fd,3)); } if (((int)RFIFOB(login_fd,4)) == 0) ShowMessage(" revision %d", (int)RFIFOB(login_fd,4)); if (((int)RFIFOB(login_fd,6)) == 0) ShowMessage("%d.\n", RFIFOW(login_fd,8)); else ShowMessage("-mod%d.\n", RFIFOW(login_fd,8)); bytes_to_read = 0; RFIFOSKIP(fd,10); break; case 0x7921: // Displaying of the list of accounts if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2)) return 0; if (RFIFOW(fd,2) < 5) { if (defaultlanguage == 'F') { ladmin_log(" Réception d'une liste des comptes vide.\n"); if (list_count == 0) ShowMessage("Aucun compte trouvé.\n"); else if (list_count == 1) ShowMessage("1 compte trouvé.\n"); else ShowMessage("%d comptes trouvés.\n", list_count); } else { ladmin_log(" Receiving of a void accounts list.\n"); if (list_count == 0) ShowMessage("No account found.\n"); else if (list_count == 1) ShowMessage("1 account found.\n"); else ShowMessage("%d accounts found.\n", list_count); } bytes_to_read = 0; } else { int i; WFIFOHEAD(login_fd,10); if (defaultlanguage == 'F') ladmin_log(" Réception d'une liste des comptes.\n"); else ladmin_log(" Receiving of a accounts list.\n"); for(i = 4; i < RFIFOW(fd,2); i += 38) { int j; char userid[24]; char lower_userid[24]; memcpy(userid, RFIFOP(fd,i + 5), sizeof(userid)); userid[sizeof(userid)-1] = '\0'; memset(lower_userid, '\0', sizeof(lower_userid)); for (j = 0; userid[j]; j++) lower_userid[j] = TOLOWER(userid[j]); list_first = RFIFOL(fd,i) + 1; // here are checks... if (list_type == 0 || (list_type == 1 && RFIFOB(fd,i+4) > 0) || (list_type == 2 && strstr(lower_userid, parameters) != NULL) || (list_type == 3 && RFIFOL(fd,i+34) != 0) || (list_type == 4 && RFIFOL(fd,i+34) == 0)) { ShowMessage("%10d ", (int)RFIFOL(fd,i)); if (RFIFOB(fd,i+4) == 0) ShowMessage(" "); else ShowMessage("%2d ", (int)RFIFOB(fd,i+4)); ShowMessage("%-24s", userid); if (defaultlanguage == 'F') { if (RFIFOB(fd,i+29) == 0) ShowMessage("%-5s ", "Femme"); else if (RFIFOB(fd,i+29) == 1) ShowMessage("%-5s ", "Male"); else ShowMessage("%-5s ", "Servr"); } else { if (RFIFOB(fd,i+29) == 0) ShowMessage("%-5s ", "Femal"); else if (RFIFOB(fd,i+29) == 1) ShowMessage("%-5s ", "Male"); else ShowMessage("%-5s ", "Servr"); } ShowMessage("%6d ", (int)RFIFOL(fd,i+30)); switch(RFIFOL(fd,i+34)) { case 0: if (defaultlanguage == 'F') ShowMessage("%-27s\n", "Compte Ok"); else ShowMessage("%-27s\n", "Account OK"); break; case 1: ShowMessage("%-27s\n", "Unregistered ID"); break; case 2: ShowMessage("%-27s\n", "Incorrect Password"); break; case 3: ShowMessage("%-27s\n", "This ID is expired"); break; case 4: ShowMessage("%-27s\n", "Rejected from Server"); break; case 5: ShowMessage("%-27s\n", "Blocked by the GM Team"); // You have been blocked by the GM Team break; case 6: ShowMessage("%-27s\n", "Your EXE file is too old"); // Your Game's EXE file is not the latest version break; case 7: ShowMessage("%-27s\n", "Banishement or"); ShowMessage(" Prohibited to login until...\n"); // You are Prohibited to log in until %s break; case 8: ShowMessage("%-27s\n", "Server is over populated"); break; case 9: ShowMessage("%-27s\n", "No MSG"); break; default: // 100 ShowMessage("%-27s\n", "This ID is totally erased"); // This ID has been totally erased break; } list_count++; } } // asking of the following acounts if (defaultlanguage == 'F') ladmin_log("Envoi d'un requête au serveur de logins pour obtenir la liste des comptes de %d à %d (complément).\n", list_first, list_last); else ladmin_log("Request to login-server to obtain the list of accounts from %d to %d (complement).\n", list_first, list_last); WFIFOW(login_fd,0) = 0x7920; WFIFOL(login_fd,2) = list_first; WFIFOL(login_fd,6) = list_last; WFIFOSET(login_fd,10); bytes_to_read = 1; } RFIFOSKIP(fd,RFIFOW(fd,2)); break; case 0x7931: // Answer of login-server about an account creation if (RFIFOREST(fd) < 30) return 0; id=RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec à la création du compte [%s]. Un compte identique existe déjà.\n", RFIFOP(fd,6)); ladmin_log("Echec à la création du compte [%s]. Un compte identique existe déjà.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] creation failed. Same account already exists.\n", RFIFOP(fd,6)); ladmin_log("Account [%s] creation failed. Same account already exists.\n", RFIFOP(fd,6)); } } else { if (defaultlanguage == 'F') { ShowMessage("Compte [%s] créé avec succès [id: %d].\n", RFIFOP(fd,6), id); ladmin_log("Compte [%s] créé avec succès [id: %d].\n", RFIFOP(fd,6), id); } else { ShowMessage("Account [%s] is successfully created [id: %d].\n", RFIFOP(fd,6), id); ladmin_log("Account [%s] is successfully created [id: %d].\n", RFIFOP(fd,6), id); } } bytes_to_read = 0; RFIFOSKIP(fd,30); break; case 0x7933: // Answer of login-server about an account deletion if (RFIFOREST(fd) < 30) return 0; if (RFIFOL(fd,2) == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec de la suppression du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); ladmin_log("Echec de la suppression du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] deletion failed. Account doesn't exist.\n", RFIFOP(fd,6)); ladmin_log("Account [%s] deletion failed. Account doesn't exist.\n", RFIFOP(fd,6)); } } else { if (defaultlanguage == 'F') { ShowMessage("Compte [%s][id: %d] SUPPRIME avec succès.\n", RFIFOP(fd,6), (int)RFIFOL(fd,2)); ladmin_log("Compte [%s][id: %d] SUPPRIME avec succès.\n", RFIFOP(fd,6), RFIFOL(fd,2)); } else { ShowMessage("Account [%s][id: %d] is successfully DELETED.\n", RFIFOP(fd,6), (int)RFIFOL(fd,2)); ladmin_log("Account [%s][id: %d] is successfully DELETED.\n", RFIFOP(fd,6), RFIFOL(fd,2)); } } bytes_to_read = 0; RFIFOSKIP(fd,30); break; case 0x7935: // answer of the change of an account password if (RFIFOREST(fd) < 30) return 0; if (RFIFOL(fd,2) == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec de la modification du mot de passe du compte [%s].\n", RFIFOP(fd,6)); ShowMessage("Le compte [%s] n'existe pas.\n", RFIFOP(fd,6)); ladmin_log("Echec de la modification du mot de passe du compte. Le compte [%s] n'existe pas.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] password changing failed.\n", RFIFOP(fd,6)); ShowMessage("Account [%s] doesn't exist.\n", RFIFOP(fd,6)); ladmin_log("Account password changing failed. The compte [%s] doesn't exist.\n", RFIFOP(fd,6)); } } else { if (defaultlanguage == 'F') { ShowMessage("Modification du mot de passe du compte [%s][id: %d] réussie.\n", RFIFOP(fd,6), (int)RFIFOL(fd,2)); ladmin_log("Modification du mot de passe du compte [%s][id: %d] réussie.\n", RFIFOP(fd,6), (int)RFIFOL(fd,2)); } else { ShowMessage("Account [%s][id: %d] password successfully changed.\n", RFIFOP(fd,6), (int)RFIFOL(fd,2)); ladmin_log("Account [%s][id: %d] password successfully changed.\n", RFIFOP(fd,6), (int)RFIFOL(fd,2)); } } bytes_to_read = 0; RFIFOSKIP(fd,30); break; case 0x7937: // answer of the change of an account state if (RFIFOREST(fd) < 34) return 0; if (RFIFOL(fd,2) == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec du changement du statut du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); ladmin_log("Echec du changement du statut du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] state changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); ladmin_log("Account [%s] state changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); } } else { char tmpstr[256]; if (defaultlanguage == 'F') { sprintf(tmpstr, "Statut du compte [%s] changé avec succès en [", RFIFOP(fd,6)); } else { sprintf(tmpstr, "Account [%s] state successfully changed in [", RFIFOP(fd,6)); } switch(RFIFOL(fd,30)) { case 0: if (defaultlanguage == 'F') strcat(tmpstr, "0: Compte Ok"); else strcat(tmpstr, "0: Account OK"); break; case 1: strcat(tmpstr, "1: Unregistered ID"); break; case 2: strcat(tmpstr, "2: Incorrect Password"); break; case 3: strcat(tmpstr, "3: This ID is expired"); break; case 4: strcat(tmpstr, "4: Rejected from Server"); break; case 5: strcat(tmpstr, "5: You have been blocked by the GM Team"); break; case 6: strcat(tmpstr, "6: [Your Game's EXE file is not the latest version"); break; case 7: strcat(tmpstr, "7: You are Prohibited to log in until..."); break; case 8: strcat(tmpstr, "8: Server is jammed due to over populated"); break; case 9: strcat(tmpstr, "9: No MSG"); break; default: // 100 strcat(tmpstr, "100: This ID is totally erased"); break; } strcat(tmpstr, "]"); ShowMessage("%s\n", tmpstr); ladmin_log("%s\n", tmpstr); } bytes_to_read = 0; RFIFOSKIP(fd,34); break; case 0x7939: // answer of the number of online players if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd,2)) return 0; { // Get length of the received packet int i; char name[20]; if (defaultlanguage == 'F') { ladmin_log(" Réception du nombre de joueurs en ligne.\n"); } else { ladmin_log(" Receiving of the number of online players.\n"); } // Read information of the servers if (RFIFOW(fd,2) < 5) { if (defaultlanguage == 'F') { ShowMessage(" Aucun serveur n'est connecté au login serveur.\n"); } else { ShowMessage(" No server is connected to the login-server.\n"); } } else { if (defaultlanguage == 'F') { ShowMessage(" Nombre de joueurs en ligne (serveur: nb):\n"); } else { ShowMessage(" Number of online players (server: number).\n"); } // Displaying of result for(i = 4; i < RFIFOW(fd,2); i += 32) { memcpy(name, RFIFOP(fd,i+6), sizeof(name)); name[sizeof(name) - 1] = '\0'; ShowMessage(" %-20s : %5d\n", name, RFIFOW(fd,i+26)); } } } bytes_to_read = 0; RFIFOSKIP(fd,RFIFOW(fd,2)); break; case 0x793b: // answer of the check of a password if (RFIFOREST(fd) < 30) return 0; id = RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Le compte [%s] n'existe pas ou le mot de passe est incorrect.\n", RFIFOP(fd,6)); ladmin_log("Le compte [%s] n'existe pas ou le mot de passe est incorrect.\n", RFIFOP(fd,6)); } else { ShowMessage("The account [%s] doesn't exist or the password is incorrect.\n", RFIFOP(fd,6)); ladmin_log("The account [%s] doesn't exist or the password is incorrect.\n", RFIFOP(fd,6)); } } else { if (defaultlanguage == 'F') { ShowMessage("Le mot de passe donné correspond bien au compte [%s][id: %d].\n", RFIFOP(fd,6), id); ladmin_log("Le mot de passe donné correspond bien au compte [%s][id: %d].\n", RFIFOP(fd,6), id); } else { ShowMessage("The proposed password is correct for the account [%s][id: %d].\n", RFIFOP(fd,6), id); ladmin_log("The proposed password is correct for the account [%s][id: %d].\n", RFIFOP(fd,6), id); } } bytes_to_read = 0; RFIFOSKIP(fd,30); break; case 0x793d: // answer of the change of an account sex if (RFIFOREST(fd) < 30) return 0; id = RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec de la modification du sexe du compte [%s].\n", RFIFOP(fd,6)); ShowMessage("Le compte [%s] n'existe pas ou le sexe est déjà celui demandé.\n", RFIFOP(fd,6)); ladmin_log("Echec de la modification du sexe du compte. Le compte [%s] n'existe pas ou le sexe est déjà celui demandé.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] sex changing failed.\n", RFIFOP(fd,6)); ShowMessage("Account [%s] doesn't exist or the sex is already the good sex.\n", RFIFOP(fd,6)); ladmin_log("Account sex changing failed. The compte [%s] doesn't exist or the sex is already the good sex.\n", RFIFOP(fd,6)); } } else { if (defaultlanguage == 'F') { ShowMessage("Sexe du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), id); ladmin_log("Sexe du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), id); } else { ShowMessage("Account [%s][id: %d] sex successfully changed.\n", RFIFOP(fd,6), id); ladmin_log("Account [%s][id: %d] sex successfully changed.\n", RFIFOP(fd,6), id); } } bytes_to_read = 0; RFIFOSKIP(fd,30); break; case 0x793f: // answer of the change of an account GM level if (RFIFOREST(fd) < 30) return 0; id = RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec de la modification du niveau de GM du compte [%s].\n", RFIFOP(fd,6)); ShowMessage("Le compte [%s] n'existe pas, le niveau de GM est déjà celui demandé\n", RFIFOP(fd,6)); ShowMessage("ou il est impossible de modifier le fichier des comptes GM.\n"); ladmin_log("Echec de la modification du niveau de GM du compte. Le compte [%s] n'existe pas, le niveau de GM est déjà celui demandé ou il est impossible de modifier le fichier des comptes GM.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] GM level changing failed.\n", RFIFOP(fd,6)); ShowMessage("Account [%s] doesn't exist, the GM level is already the good GM level\n", RFIFOP(fd,6)); ShowMessage("or it's impossible to modify the GM accounts file.\n"); ladmin_log("Account GM level changing failed. The compte [%s] doesn't exist, the GM level is already the good sex or it's impossible to modify the GM accounts file.\n", RFIFOP(fd,6)); } } else { if (defaultlanguage == 'F') { ShowMessage("Niveau de GM du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), id); ladmin_log("Niveau de GM du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), id); } else { ShowMessage("Account [%s][id: %d] GM level successfully changed.\n", RFIFOP(fd,6), id); ladmin_log("Account [%s][id: %d] GM level successfully changed.\n", RFIFOP(fd,6), id); } } bytes_to_read = 0; RFIFOSKIP(fd,30); break; case 0x7941: // answer of the change of an account email if (RFIFOREST(fd) < 30) return 0; id = RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec de la modification de l'e-mail du compte [%s].\n", RFIFOP(fd,6)); ShowMessage("Le compte [%s] n'existe pas.\n", RFIFOP(fd,6)); ladmin_log("Echec de la modification de l'e-mail du compte. Le compte [%s] n'existe pas.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] e-mail changing failed.\n", RFIFOP(fd,6)); ShowMessage("Account [%s] doesn't exist.\n", RFIFOP(fd,6)); ladmin_log("Account e-mail changing failed. The compte [%s] doesn't exist.\n", RFIFOP(fd,6)); } } else { if (defaultlanguage == 'F') { ShowMessage("Modification de l'e-mail du compte [%s][id: %d] réussie.\n", RFIFOP(fd,6), id); ladmin_log("Modification de l'e-mail du compte [%s][id: %d] réussie.\n", RFIFOP(fd,6), id); } else { ShowMessage("Account [%s][id: %d] e-mail successfully changed.\n", RFIFOP(fd,6), id); ladmin_log("Account [%s][id: %d] e-mail successfully changed.\n", RFIFOP(fd,6), id); } } bytes_to_read = 0; RFIFOSKIP(fd,30); break; case 0x7943: // answer of the change of an account memo if (RFIFOREST(fd) < 30) return 0; id = RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec du changement du mémo du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); ladmin_log("Echec du changement du mémo du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] memo changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); ladmin_log("Account [%s] memo changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); } } else { if (defaultlanguage == 'F') { ShowMessage("Mémo du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), id); ladmin_log("Mémo du compte [%s][id: %d] changé avec succès.\n", RFIFOP(fd,6), id); } else { ShowMessage("Account [%s][id: %d] memo successfully changed.\n", RFIFOP(fd,6), id); ladmin_log("Account [%s][id: %d] memo successfully changed.\n", RFIFOP(fd,6), id); } } bytes_to_read = 0; RFIFOSKIP(fd,30); break; case 0x7945: // answer of an account id search if (RFIFOREST(fd) < 30) return 0; id = RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); ladmin_log("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); } else { ShowMessage("Unable to find the account [%s] id. Account doesn't exist.\n", RFIFOP(fd,6)); ladmin_log("Unable to find the account [%s] id. Account doesn't exist.\n", RFIFOP(fd,6)); } } else { if (defaultlanguage == 'F') { ShowMessage("Le compte [%s] a pour id: %d.\n", RFIFOP(fd,6), id); ladmin_log("Le compte [%s] a pour id: %d.\n", RFIFOP(fd,6), id); } else { ShowMessage("The account [%s] have the id: %d.\n", RFIFOP(fd,6), id); ladmin_log("The account [%s] have the id: %d.\n", RFIFOP(fd,6), id); } } bytes_to_read = 0; RFIFOSKIP(fd,30); break; case 0x7947: // answer of an account name search if (RFIFOREST(fd) < 30) return 0; id = RFIFOL(fd,2); if (strcmp((const char*)RFIFOP(fd,6), "") == 0) { if (defaultlanguage == 'F') { ShowMessage("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas.\n", id); ladmin_log("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas.\n", id); } else { ShowMessage("Unable to find the account [%d] name. Account doesn't exist.\n", id); ladmin_log("Unable to find the account [%d] name. Account doesn't exist.\n", id); } } else { if (defaultlanguage == 'F') { ShowMessage("Le compte [id: %d] a pour nom: %s.\n", id, RFIFOP(fd,6)); ladmin_log("Le compte [id: %d] a pour nom: %s.\n", id, RFIFOP(fd,6)); } else { ShowMessage("The account [id: %d] have the name: %s.\n", id, RFIFOP(fd,6)); ladmin_log("The account [id: %d] have the name: %s.\n", id, RFIFOP(fd,6)); } } bytes_to_read = 0; RFIFOSKIP(fd,30); break; case 0x7949: // answer of an account validity limit set if (RFIFOREST(fd) < 34) return 0; id = RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); ladmin_log("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); ladmin_log("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); } } else { time_t timestamp = RFIFOL(fd,30); if (timestamp == 0) { if (defaultlanguage == 'F') { ShowMessage("Limite de validité du compte [%s][id: %d] changée avec succès en [illimité].\n", RFIFOP(fd,6), id); ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès en [illimité].\n", RFIFOP(fd,6), id); } else { ShowMessage("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited].\n", RFIFOP(fd,6), id); ladmin_log("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited].\n", RFIFOP(fd,6), id); } } else { char tmpstr[128]; strftime(tmpstr, 24, date_format, localtime(×tamp)); if (defaultlanguage == 'F') { ShowMessage("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), id, tmpstr); ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), id, tmpstr); } else { ShowMessage("Validity Limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), id, tmpstr); ladmin_log("Validity Limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), id, tmpstr); } } } bytes_to_read = 0; RFIFOSKIP(fd,34); break; case 0x794b: // answer of an account ban set if (RFIFOREST(fd) < 34) return 0; id = RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); ladmin_log("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); ladmin_log("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); } } else { time_t timestamp = RFIFOL(fd,30); if (timestamp == 0) { if (defaultlanguage == 'F') { ShowMessage("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n", RFIFOP(fd,6), id); ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n", RFIFOP(fd,6), id); } else { ShowMessage("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), id); ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), id); } } else { char tmpstr[128]; strftime(tmpstr, 24, date_format, localtime(×tamp)); if (defaultlanguage == 'F') { ShowMessage("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), id, tmpstr); ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), id, tmpstr); } else { ShowMessage("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), id, tmpstr); ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), id, tmpstr); } } } bytes_to_read = 0; RFIFOSKIP(fd,34); break; case 0x794d: // answer of an account ban date/time changing if (RFIFOREST(fd) < 34) return 0; id = RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); ladmin_log("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); ladmin_log("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); } } else { time_t timestamp = RFIFOL(fd,30); if (timestamp == 0) { if (defaultlanguage == 'F') { ShowMessage("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n", RFIFOP(fd,6), id); ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n", RFIFOP(fd,6), id); } else { ShowMessage("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), id); ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", RFIFOP(fd,6), id); } } else { char tmpstr[128]; strftime(tmpstr, 24, date_format, localtime(×tamp)); if (defaultlanguage == 'F') { ShowMessage("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), id, tmpstr); ladmin_log("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), id, tmpstr); } else { ShowMessage("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), id, tmpstr); ladmin_log("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), id, tmpstr); } } } bytes_to_read = 0; RFIFOSKIP(fd,34); break; case 0x794f: // answer of a broadcast if (RFIFOREST(fd) < 4) return 0; if (RFIFOW(fd,2) == (unsigned short)-1) { if (defaultlanguage == 'F') { ShowMessage("Echec de l'envoi du message. Aucun server de char en ligne.\n"); ladmin_log("Echec de l'envoi du message. Aucun server de char en ligne.\n"); } else { ShowMessage("Message sending failed. No online char-server.\n"); ladmin_log("Message sending failed. No online char-server.\n"); } } else { if (defaultlanguage == 'F') { ShowMessage("Message transmis au server de logins avec succès.\n"); ladmin_log("Message transmis au server de logins avec succès.\n"); } else { ShowMessage("Message successfully sended to login-server.\n"); ladmin_log("Message successfully sended to login-server.\n"); } } bytes_to_read = 0; RFIFOSKIP(fd,4); break; case 0x7951: // answer of an account validity limit changing if (RFIFOREST(fd) < 34) return 0; id = RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); ladmin_log("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n", RFIFOP(fd,6)); } else { ShowMessage("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); ladmin_log("Account [%s] validity limit changing failed. Account doesn't exist.\n", RFIFOP(fd,6)); } } else { time_t timestamp = RFIFOL(fd,30); if (timestamp == 0) { if (defaultlanguage == 'F') { ShowMessage("Limite de validité du compte [%s][id: %d] inchangée.\n", RFIFOP(fd,6), id); ShowMessage("Le compte a une validité illimitée ou\n"); ShowMessage("la modification est impossible avec les ajustements demandés.\n"); ladmin_log("Limite de validité du compte [%s][id: %d] inchangée. Le compte a une validité illimitée ou la modification est impossible avec les ajustements demandés.\n", RFIFOP(fd,6), id); } else { ShowMessage("Validity limit of the account [%s][id: %d] unchanged.\n", RFIFOP(fd,6), id); ShowMessage("The account have an unlimited validity limit or\n"); ShowMessage("the changing is impossible with the proposed adjustments.\n"); ladmin_log("Validity limit of the account [%s][id: %d] unchanged. The account have an unlimited validity limit or the changing is impossible with the proposed adjustments.\n", RFIFOP(fd,6), id); } } else { char tmpstr[128]; strftime(tmpstr, 24, date_format, localtime(×tamp)); if (defaultlanguage == 'F') { ShowMessage("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), id, tmpstr); ladmin_log("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n", RFIFOP(fd,6), id, tmpstr); } else { ShowMessage("Validity limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), id, tmpstr); ladmin_log("Validity limit of the account [%s][id: %d] successfully changed to be until %s.\n", RFIFOP(fd,6), id, tmpstr); } } } bytes_to_read = 0; RFIFOSKIP(fd,34); break; case 0x7953: // answer of a request about informations of an account (by account name/id) if (RFIFOREST(fd) < 150 || RFIFOREST(fd) < (size_t)(150 + RFIFOW(fd,148))) return 0; { char userid[24], error_message[20], lastlogin[24], last_ip[16], email[40], memo[255]; time_t ban_until_time; // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban) time_t connect_until_time; // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited) memcpy(userid, RFIFOP(fd,7), sizeof(userid)); userid[sizeof(userid)-1] = '\0'; memcpy(error_message, RFIFOP(fd,40), sizeof(error_message)); error_message[sizeof(error_message)-1] = '\0'; memcpy(lastlogin, RFIFOP(fd,60), sizeof(lastlogin)); lastlogin[sizeof(lastlogin)-1] = '\0'; memcpy(last_ip, RFIFOP(fd,84), sizeof(last_ip)); last_ip[sizeof(last_ip)-1] = '\0'; memcpy(email, RFIFOP(fd,100), sizeof(email)); email[sizeof(email)-1] = '\0'; connect_until_time = (time_t)RFIFOL(fd,140); ban_until_time = (time_t)RFIFOL(fd,144); memset(memo, '\0', sizeof(memo)); strncpy(memo, (const char*)RFIFOP(fd,150), RFIFOW(fd,148)); id = RFIFOL(fd,2); if (id == -1) { if (defaultlanguage == 'F') { ShowMessage("Impossible de trouver le compte [%s]. Le compte n'existe pas.\n", parameters); ladmin_log("Impossible de trouver le compte [%s]. Le compte n'existe pas.\n", parameters); } else { ShowMessage("Unabled to find the account [%s]. Account doesn't exist.\n", parameters); ladmin_log("Unabled to find the account [%s]. Account doesn't exist.\n", parameters); } } else if (strlen(userid) == 0) { if (defaultlanguage == 'F') { ShowMessage("Impossible de trouver le compte [id: %s]. Le compte n'existe pas.\n", parameters); ladmin_log("Impossible de trouver le compte [id: %s]. Le compte n'existe pas.\n", parameters); } else { ShowMessage("Unabled to find the account [id: %s]. Account doesn't exist.\n", parameters); ladmin_log("Unabled to find the account [id: %s]. Account doesn't exist.\n", parameters); } } else { if (defaultlanguage == 'F') { ladmin_log("Réception d'information concernant un compte.\n"); ShowMessage("Le compte a les caractéristiques suivantes:\n"); } else { ladmin_log("Receiving information about an account.\n"); ShowMessage("The account is set with:\n"); } if (RFIFOB(fd,6) == 0) { ShowMessage(" Id: %d (non-GM)\n", id); } else { if (defaultlanguage == 'F') { ShowMessage(" Id: %d (GM niveau %d)\n", id, (int)RFIFOB(fd,6)); } else { ShowMessage(" Id: %d (GM level %d)\n", id, (int)RFIFOB(fd,6)); } } if (defaultlanguage == 'F') { ShowMessage(" Nom: '%s'\n", userid); if (RFIFOB(fd,31) == 0) ShowMessage(" Sexe: Femme\n"); else if (RFIFOB(fd,31) == 1) ShowMessage(" Sexe: Male\n"); else ShowMessage(" Sexe: Serveur\n"); } else { ShowMessage(" Name: '%s'\n", userid); if (RFIFOB(fd,31) == 0) ShowMessage(" Sex: Female\n"); else if (RFIFOB(fd,31) == 1) ShowMessage(" Sex: Male\n"); else ShowMessage(" Sex: Server\n"); } ShowMessage(" E-mail: %s\n", email); switch(RFIFOL(fd,36)) { case 0: if (defaultlanguage == 'F') ShowMessage(" Statut: 0 [Compte Ok]\n"); else ShowMessage(" Statut: 0 [Account OK]\n"); break; case 1: ShowMessage(" Statut: 1 [Unregistered ID]\n"); break; case 2: ShowMessage(" Statut: 2 [Incorrect Password]\n"); break; case 3: ShowMessage(" Statut: 3 [This ID is expired]\n"); break; case 4: ShowMessage(" Statut: 4 [Rejected from Server]\n"); break; case 5: ShowMessage(" Statut: 5 [You have been blocked by the GM Team]\n"); break; case 6: ShowMessage(" Statut: 6 [Your Game's EXE file is not the latest version]\n"); break; case 7: ShowMessage(" Statut: 7 [You are Prohibited to log in until %s]\n", error_message); break; case 8: ShowMessage(" Statut: 8 [Server is jammed due to over populated]\n"); break; case 9: ShowMessage(" Statut: 9 [No MSG]\n"); break; default: // 100 ShowMessage(" Statut: %d [This ID is totally erased]\n", (int)RFIFOL(fd,36)); break; } if (defaultlanguage == 'F') { if (ban_until_time == 0) { ShowMessage(" Banissement: non banni.\n"); } else { char tmpstr[128]; strftime(tmpstr, 24, date_format, localtime(&ban_until_time)); ShowMessage(" Banissement: jusqu'au %s.\n", tmpstr); } if (RFIFOL(fd,32) > 1) ShowMessage(" Compteur: %d connexions.\n", (int)RFIFOL(fd,32)); else ShowMessage(" Compteur: %d connexion.\n", (int)RFIFOL(fd,32)); ShowMessage(" Dernière connexion le: %s (ip: %s)\n", lastlogin, last_ip); if (connect_until_time == 0) { ShowMessage(" Limite de validité: illimité.\n"); } else { char tmpstr[128]; strftime(tmpstr, 24, date_format, localtime(&connect_until_time)); ShowMessage(" Limite de validité: jusqu'au %s.\n", tmpstr); } } else { if (ban_until_time == 0) { ShowMessage(" Banishment: not banished.\n"); } else { char tmpstr[128]; strftime(tmpstr, 24, date_format, localtime(&ban_until_time)); ShowMessage(" Banishment: until %s.\n", tmpstr); } if (RFIFOL(fd,32) > 1) ShowMessage(" Count: %d connections.\n", (int)RFIFOL(fd,32)); else ShowMessage(" Count: %d connection.\n", (int)RFIFOL(fd,32)); ShowMessage(" Last connection at: %s (ip: %s)\n", lastlogin, last_ip); if (connect_until_time == 0) { ShowMessage(" Validity limit: unlimited.\n"); } else { char tmpstr[128]; strftime(tmpstr, 24, date_format, localtime(&connect_until_time)); ShowMessage(" Validity limit: until %s.\n", tmpstr); } } ShowMessage(" Memo: '%s'\n", memo); } } bytes_to_read = 0; RFIFOSKIP(fd,150 + RFIFOW(fd,148)); break; default: ShowMessage("Remote administration has been disconnected (unknown packet).\n"); ladmin_log("'End of connection, unknown packet.\n"); set_eof(fd); return 0; } } // if we don't wait new packets, do the prompt prompt(); return 0; } //------------------------------------ // Function to connect to login-server //------------------------------------ int Connect_login_server(void) { if (defaultlanguage == 'F') { ShowMessage("Essai de connection au server de logins...\n"); ladmin_log("Essai de connection au server de logins...\n"); } else { ShowMessage("Attempt to connect to login-server...\n"); ladmin_log("Attempt to connect to login-server...\n"); } login_fd = make_connection(login_ip, loginserverport); if (login_fd == -1) { //Might not be the most elegant way to handle this, but I've never used ladmin so I dunno what else you could do. [Skotlex] ShowMessage("Error: Failed to connect to Login Server\n"); exit(1); } if (passenc == 0) { WFIFOHEAD(login_fd,28); WFIFOW(login_fd,0) = 0x7918; // Request for administation login WFIFOW(login_fd,2) = 0; // no encrypted memcpy(WFIFOP(login_fd,4), loginserveradminpassword, 24); WFIFOSET(login_fd,28); bytes_to_read = 1; if (defaultlanguage == 'F') { ShowMessage("Envoi du mot de passe...\n"); ladmin_log("Envoi du mot de passe...\n"); } else { ShowMessage("Sending of the password...\n"); ladmin_log("Sending of the password...\n"); } } else { WFIFOHEAD(login_fd,2); WFIFOW(login_fd,0) = 0x791a; // Sending request about the coding key WFIFOSET(login_fd,2); bytes_to_read = 1; if (defaultlanguage == 'F') { ShowMessage("Demande de la clef MD5...\n"); ladmin_log("Demande de la clef MD5...\n"); } else { ShowMessage("Request about the MD5 key...\n"); ladmin_log("Request about the MD5 key...\n"); } } return 0; } //----------------------------------- // Reading general configuration file //----------------------------------- int ladmin_config_read(const char *cfgName) { char line[1024], w1[1024], w2[1024]; FILE *fp; fp = fopen(cfgName, "r"); if (fp == NULL) { if (defaultlanguage == 'F') { ShowMessage("\033[0mFichier de configuration (%s) non trouvé.\n", cfgName); } else { ShowMessage("\033[0mConfiguration file (%s) not found.\n", cfgName); } return 1; } if (defaultlanguage == 'F') { ShowMessage("\033[0m---Début de lecture du fichier de configuration Ladmin (%s)\n", cfgName); } else { ShowMessage("\033[0m---Start reading of Ladmin configuration file (%s)\n", cfgName); } while(fgets(line, sizeof(line), fp)) { if (line[0] == '/' && line[1] == '/') continue; if (sscanf(line, "%[^:]: %[^\r\n]", w1, w2) == 2) { remove_control_chars(w1); remove_control_chars(w2); if(strcmpi(w1,"login_ip")==0) { uint32 ipl = host2ip(w2); if (ipl != 0) { ip2str(ipl, loginserverip); if (defaultlanguage == 'F') { ShowMessage("Adresse du serveur de logins: %s -> %s\n", w2, loginserverip); } else { ShowMessage("Login server IP address: %s -> %s\n", w2, loginserverip); } } else memcpy(loginserverip, w2, 16); } else if (strcmpi(w1, "login_port") == 0) { loginserverport = atoi(w2); } else if (strcmpi(w1, "admin_pass") == 0) { strncpy(loginserveradminpassword, w2, sizeof(loginserveradminpassword)); loginserveradminpassword[sizeof(loginserveradminpassword)-1] = '\0'; } else if (strcmpi(w1, "passenc") == 0) { passenc = atoi(w2); if (passenc < 0 || passenc > 2) passenc = 0; } else if (strcmpi(w1, "defaultlanguage") == 0) { if (w2[0] == 'F' || w2[0] == 'E') defaultlanguage = w2[0]; } else if (strcmpi(w1, "ladmin_log_filename") == 0) { strncpy(ladmin_log_filename, w2, sizeof(ladmin_log_filename)); ladmin_log_filename[sizeof(ladmin_log_filename)-1] = '\0'; } else if (strcmpi(w1, "date_format") == 0) { strncpy(date_format, w2, sizeof(date_format)); } else if(strcmpi(w1,"stdout_with_ansisequence") == 0) { stdout_with_ansisequence = config_switch(w2); } else if (strcmpi(w1, "import") == 0) { ladmin_config_read(w2); } } } fclose(fp); login_ip = str2ip(loginserverip); if (defaultlanguage == 'F') { ShowMessage("---Lecture du fichier de configuration Ladmin terminée.\n"); } else { ShowMessage("---End reading of Ladmin configuration file.\n"); } return 0; } //------------------------------ // Function called when the server // has received a crash signal. //------------------------------ void do_abort(void) { } //-------------------------------------- // Function called at exit of the server //-------------------------------------- void do_final(void) { if (already_exit_function == 0) { if (defaultlanguage == 'F') { ShowMessage("\033[0m----Fin de Ladmin (fin normale avec fermeture de tous les fichiers).\n"); ladmin_log("----Fin de Ladmin (fin normale avec fermeture de tous les fichiers).\n"); } else { ShowMessage("\033[0m----End of Ladmin (normal end with closing of all files).\n"); ladmin_log("----End of Ladmin (normal end with closing of all files).\n"); } already_exit_function = 1; do_close(login_fd); } } //------------------------ // Main function of ladmin //------------------------ int do_init(int argc, char **argv) { int next; socket_init(); // read ladmin configuration ladmin_config_read((argc > 1) ? argv[1] : LADMIN_CONF_NAME); ladmin_log(""); if (defaultlanguage == 'F') { ladmin_log("Fichier de configuration lu.\n"); } else { ladmin_log("Configuration file readed.\n"); } srand(time(NULL)); set_defaultparse(parse_fromlogin); if (defaultlanguage == 'F') { ShowMessage("Outil d'administration à distance de eAthena.\n"); ShowMessage("(pour eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION, ATHENA_MINOR_VERSION, ATHENA_REVISION); } else { ShowMessage("EAthena login-server administration tool.\n"); ShowMessage("(for eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION, ATHENA_MINOR_VERSION, ATHENA_REVISION); } if (defaultlanguage == 'F') { ladmin_log("Ladmin est prêt.\n"); ShowMessage("Ladmin est \033[1;32mprêt\033[0m.\n\n"); } else { ladmin_log("Ladmin is ready.\n"); ShowMessage("Ladmin is \033[1;32mready\033[0m.\n\n"); } Connect_login_server(); // minimalist core doesn't have sockets parsing, // so we have to do this ourselves while (runflag) { next = do_timer(gettick_nocache()); do_sendrecv(next); do_parsepacket(); } return 0; }