From a3c885e41bc188051f8918f090be998469018bca Mon Sep 17 00:00:00 2001 From: Ben Longbons Date: Fri, 20 Sep 2013 12:23:02 -0700 Subject: Use the One Makefile to build them all This changes the names of the built binaries: login-server -> tmwa-login char-server -> tmwa-char map-server -> tmwa-map ladmin -> tmwa-admin eathena-monitor -> tmwa-monitor It also gets rid of the 'deps.make' file. --- src/admin/ladmin.cpp | 2872 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2872 insertions(+) create mode 100644 src/admin/ladmin.cpp (limited to 'src/admin/ladmin.cpp') diff --git a/src/admin/ladmin.cpp b/src/admin/ladmin.cpp new file mode 100644 index 0000000..e0860b2 --- /dev/null +++ b/src/admin/ladmin.cpp @@ -0,0 +1,2872 @@ +#include + +#include +#include + +#include + +#include +#include + +#include "../common/core.hpp" +#include "../common/cxxstdio.hpp" +#include "../common/human_time_diff.hpp" +#include "../common/io.hpp" +#include "../common/md5calc.hpp" +#include "../common/mmo.hpp" +#include "../common/socket.hpp" +#include "../common/utils.hpp" +#include "../common/version.hpp" + +#include "../poison.hpp" + +#define LADMIN_CONF_NAME "conf/ladmin_athena.conf" + +static +int eathena_interactive_session; +#define Iprintf if (eathena_interactive_session) PRINTF + +//-------------------------------INSTRUCTIONS------------------------------ +// Set the variables below: +// IP of the login server. +// Port where the login-server listens incoming packets. +// Password of administration (same of config_athena.conf). +// IMPORTANT: +// Be sure that you authorize remote administration in login-server +// (see login_athena.conf, 'admin_state' parameter) +//------------------------------------------------------------------------- +static +IP4Address login_ip = IP4_LOCALHOST; // IP of login-server +static +int login_port = 6900; // Port of login-server +static +AccountPass admin_pass = stringish("admin"); // Administration password +static +FString ladmin_log_filename = "log/ladmin.log"; +//------------------------------------------------------------------------- +// LIST of COMMANDs that you can type at the prompt: +// To use these commands you can only type only the first letters. +// You must type a minimum of letters (you can not type 'a', +// because ladmin doesn't know if it's for 'aide' or for 'add') +// q <= quit, li <= list, pass <= passwd, etc. +// +// Note: every time you must give a account_name, you can use "" or '' (spaces can be included) +// +// help/? +// Display the description of the commands +// help/? [command] +// Display the description of the specified command +// +// add +// Create an account with the default email (a@a.com). +// Concerning the sex, only the first letter is used (F or M). +// The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail. +// When the password is omitted, the input is done without displaying of the pressed keys. +// add testname Male testpass +// +// ban/banish yyyy/mm/dd hh:mm:ss +// Changes the final date of a banishment of an account. +// Like banset, but is at end. +// +// banadd +// Adds or substracts time from the final date of a banishment of an account. +// Modifier is done as follows: +// Adjustment value (-1, 1, +1, etc...) +// Modified element: +// a or y: year +// m: month +// j or d: day +// h: hour +// mn: minute +// s: second +// banadd testname +1m-2mn1s-6y +// this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time. +// NOTE: If you modify the final date of a non-banished account, +// you fix the final date to (actual time +- adjustments) +// +// banset yyyy/mm/dd [hh:mm:ss] +// Changes the final date of a banishment of an account. +// Default time [hh:mm:ss]: 23:59:59. +// banset 0 +// Set a non-banished account (0 = unbanished). +// +// block +// Set state 5 (You have been blocked by the GM Team) to an account. +// Like state 5. +// +// check +// Check the validity of a password for an account +// NOTE: Server will never sends back a password. +// It's the only method you have to know if a password is correct. +// The other method is to have a ('physical') access to the accounts file. +// +// create +// Like the 'add' command, but with e-mail moreover. +// create testname Male my@mail.com testpass +// +// del +// Remove an account. +// This order requires confirmation. After confirmation, the account is deleted. +// +// email +// Modify the e-mail of an account. +// +// getcount +// Give the number of players online on all char-servers. +// +// gm [GM_level] +// Modify the GM level of an account. +// Default value remove GM level (GM level = 0). +// gm testname 80 +// +// id +// Give the id of an account. +// +// info +// Display complete information of an account. +// +// kami +// Sends a broadcast message on all map-server (in yellow). +// kamib +// Sends a broadcast message on all map-server (in blue). +// +// list/ls [start_id [end_id]] +// Display a list of accounts. +// 'start_id', 'end_id': indicate end and start identifiers. +// Research by name is not possible with this command. +// list 10 9999999 +// +// listBan/lsBan [start_id [end_id]] +// Like list/ls, but only for accounts with state or banished +// +// listGM/lsGM [start_id [end_id]] +// Like list/ls, but only for GM accounts +// +// listOK/lsOK [start_id [end_id]] +// Like list/ls, but only for accounts without state and not banished +// +// memo +// Modify the memo of an account. +// 'memo': it can have until 253 characters (with spaces or not). +// +// name +// Give the name of an account. +// +// passwd +// Change the password of an account. +// When new password is omitted, the input is done without displaying of the pressed keys. +// +// quit/end/exit +// End of the program of administration +// +// reloadGM +// Reload GM configuration file +// +// search +// Seek accounts. +// Displays the accounts whose names correspond. +// search -r/-e/--expr/--regex +// Seek accounts by regular expression. +// Displays the accounts whose names correspond. +// +// sex +// Modify the sex of an account. +// sex testname Male +// +// state +// Change the state of an account. +// 'new_state': state is the state of the packet 0x006a + 1. The possibilities are: +// 0 = Account ok 6 = Your Game's EXE file is not the latest version +// 1 = Unregistered ID 7 = You are Prohibited to log in until %s +// 2 = Incorrect Password 8 = Server is jammed due to over populated +// 3 = This ID is expired 9 = No MSG +// 4 = Rejected from Server 100 = This ID has been totally erased +// 5 = You have been blocked by the GM Team +// all other values are 'No MSG', then use state 9 please. +// 'error_message_#7': message of the code error 6 = Your are Prohibited to log in until %s (packet 0x006a) +// +// timeadd +// Adds or substracts time from the validity limit of an account. +// Modifier is done as follows: +// Adjustment value (-1, 1, +1, etc...) +// Modified element: +// a or y: year +// m: month +// j or d: day +// h: hour +// mn: minute +// s: second +// timeadd testname +1m-2mn1s-6y +// this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time. +// NOTE: You can not modify a unlimited validity limit. +// If you want modify it, you want probably create a limited validity limit. +// So, at first, you must set the validity limit to a date/time. +// +// timeset yyyy/mm/dd [hh:mm:ss] +// Changes the validity limit of an account. +// Default time [hh:mm:ss]: 23:59:59. +// timeset 0 +// Gives an unlimited validity limit (0 = unlimited). +// +// unban/unbanish +// Unban an account. +// Like banset 0. +// +// unblock +// Set state 0 (Account ok) to an account. +// Like state 0. +// +// version +// Display the version of the login-server. +// +// who +// Displays complete information of an account. +// +//------------------------------------------------------------------------- +static +int login_fd; +static +int bytes_to_read = 0; // flag to know if we waiting bytes from login-server +static +TString parameters; // needs to be global since it's passed to the parse function +// really should be added to session data +static +int list_first, list_last, list_type, list_count; // parameter to display a list of accounts +static +int already_exit_function = 0; // sometimes, the exit function is called twice... so, don't log twice the message + +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wmissing-noreturn" +void SessionDeleter::operator()(SessionData *) +{ + assert(false && "ladmin does not have sessions"); +} +#pragma GCC diagnostic pop + +//------------------------------ +// Writing function of logs file +//------------------------------ +#define LADMIN_LOG(fmt, ...) \ + ladmin_log(STRPRINTF(fmt, ## __VA_ARGS__)) +static +void ladmin_log(XString line) +{ + FILE *logfp = fopen(ladmin_log_filename.c_str(), "a"); + if (!logfp) + return; + log_with_timestamp(logfp, line); + fclose(logfp); +} + +static +bool qsplit(ZString src) +{ + return !src; +} + +template +static +bool qsplit(ZString src, F first, R... rest) +{ + if (!src) + return false; + XString one; + if (src.startswith('\'')) + { + src = src.xslice_t(1); + auto it = std::find(src.begin(), src.end(), '\''); + if (it == src.end()) + return false; + one = src.xislice_h(it); + src = src.xislice_t(it + 1); + while (src.startswith(' ')) + src = src.xslice_t(1); + } + else if (src.startswith('"')) + { + src = src.xslice_t(1); + auto it = std::find(src.begin(), src.end(), '"'); + if (it == src.end()) + return false; + one = src.xislice_h(it); + src = src.xislice_t(it + 1); + while (src.startswith(' ')) + src = src.xslice_t(1); + } + else + { + auto it = std::find(src.begin(), src.end(), ' '); + one = src.xislice_h(it); + src = src.xislice_t(it); + while (src.startswith(' ')) + src = src.xslice_t(1); + } + return extract(one, first) && qsplit(src, rest...); +} + +//----------------------------------------- +// Sub-function: Display commands of ladmin +//----------------------------------------- +static +void display_help(ZString param) +{ + XString command = param.xislice_h(std::find(param.begin(), param.end(), ' ')); + + if (command.startswith('?')) + command = "help"; + + LADMIN_LOG("Displaying of the commands or a command.\n"); + + if (command == "help") + { + PRINTF("help/?\n"); + PRINTF(" Display the description of the commands\n"); + PRINTF("help/? [command]\n"); + PRINTF(" Display the description of the specified command\n"); + } + else if (command == "add") + { + PRINTF("add \n"); + PRINTF(" Create an account with the default email (a@a.com).\n"); + PRINTF(" Concerning the sex, only the first letter is used (F or M).\n"); + PRINTF(" The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.\n"); + PRINTF(" When the password is omitted,\n"); + PRINTF(" the input is done without displaying of the pressed keys.\n"); + PRINTF(" add testname Male testpass\n"); + } + else if (command == "ban") + { + PRINTF("ban/banish yyyy/mm/dd hh:mm:ss \n"); + PRINTF(" Changes the final date of a banishment of an account.\n"); + PRINTF(" Like banset, but is at end.\n"); + } + else if (command == "banadd") + { + PRINTF("banadd \n"); + PRINTF(" Adds or substracts time from the final date of a banishment of an account.\n"); + PRINTF(" Modifier is done as follows:\n"); + PRINTF(" Adjustment value (-1, 1, +1, etc...)\n"); + PRINTF(" Modified element:\n"); + PRINTF(" a or y: year\n"); + PRINTF(" m: month\n"); + PRINTF(" j or d: day\n"); + PRINTF(" h: hour\n"); + PRINTF(" mn: minute\n"); + PRINTF(" s: second\n"); + PRINTF(" banadd testname +1m-2mn1s-6y\n"); + PRINTF(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + PRINTF(" and 6 years at the same time.\n"); + PRINTF("NOTE: If you modify the final date of a non-banished account,\n"); + PRINTF(" you fix the final date to (actual time +- adjustments)\n"); + } + else if (command == "banset") + { + PRINTF("banset yyyy/mm/dd [hh:mm:ss]\n"); + PRINTF(" Changes the final date of a banishment of an account.\n"); + PRINTF(" Default time [hh:mm:ss]: 23:59:59.\n"); + PRINTF("banset 0\n"); + PRINTF(" Set a non-banished account (0 = unbanished).\n"); + } + else if (command == "block") + { + PRINTF("block \n"); + PRINTF(" Set state 5 (You have been blocked by the GM Team) to an account.\n"); + PRINTF(" This command works like state 5.\n"); + } + else if (command == "check") + { + PRINTF("check \n"); + PRINTF(" Check the validity of a password for an account.\n"); + PRINTF(" NOTE: Server will never sends back a password.\n"); + PRINTF(" It's the only method you have to know if a password is correct.\n"); + PRINTF(" The other method is to have a ('physical') access to the accounts file.\n"); + } + else if (command == "create") + { + PRINTF("create \n"); + PRINTF(" Like the 'add' command, but with e-mail moreover.\n"); + PRINTF(" create testname Male my@mail.com testpass\n"); + } + else if (command == "delete") + { + PRINTF("del \n"); + PRINTF(" Remove an account.\n"); + PRINTF(" This order requires confirmation. After confirmation, the account is deleted.\n"); + } + else if (command == "email") + { + PRINTF("email \n"); + PRINTF(" Modify the e-mail of an account.\n"); + } + else if (command == "getcount") + { + PRINTF("getcount\n"); + PRINTF(" Give the number of players online on all char-servers.\n"); + } + else if (command == "gm") + { + PRINTF("gm [GM_level]\n"); + PRINTF(" Modify the GM level of an account.\n"); + PRINTF(" Default value remove GM level (GM level = 0).\n"); + PRINTF(" gm testname 80\n"); + } + else if (command == "id") + { + PRINTF("id \n"); + PRINTF(" Give the id of an account.\n"); + } + else if (command == "info") + { + PRINTF("info \n"); + PRINTF(" Display complete information of an account.\n"); + } + else if (command == "kami") + { + PRINTF("kami \n"); + PRINTF(" Sends a broadcast message on all map-server (in yellow).\n"); + } + else if (command == "kamib") + { + PRINTF("kamib \n"); + PRINTF(" Sends a broadcast message on all map-server (in blue).\n"); + } + else if (command == "list") + { + PRINTF("list/ls [start_id [end_id]]\n"); + PRINTF(" Display a list of accounts.\n"); + PRINTF(" 'start_id', 'end_id': indicate end and start identifiers.\n"); + PRINTF(" Research by name is not possible with this command.\n"); + PRINTF(" list 10 9999999\n"); + } + else if (command == "itemfrob") + { + PRINTF("itemfrob \n"); + PRINTF(" Translates item IDs for all accounts.\n"); + PRINTF(" Any items matching the source item ID will be mapped to the dest-id.\n"); + PRINTF(" itemfrob 500 700\n"); + } + else if (command == "listban") + { + PRINTF("listBan/lsBan [start_id [end_id]]\n"); + PRINTF(" Like list/ls, but only for accounts with state or banished.\n"); + } + else if (command == "listgm") + { + PRINTF("listGM/lsGM [start_id [end_id]]\n"); + PRINTF(" Like list/ls, but only for GM accounts.\n"); + } + else if (command == "listok") + { + PRINTF("listOK/lsOK [start_id [end_id]]\n"); + PRINTF(" Like list/ls, but only for accounts without state and not banished.\n"); + } + else if (command == "memo") + { + PRINTF("memo \n"); + PRINTF(" Modify the memo of an account.\n"); + PRINTF(" 'memo': it can have until 253 characters (with spaces or not).\n"); + } + else if (command == "name") + { + PRINTF("name \n"); + PRINTF(" Give the name of an account.\n"); + } + else if (command == "password") + { + PRINTF("passwd \n"); + PRINTF(" Change the password of an account.\n"); + PRINTF(" When new password is omitted,\n"); + PRINTF(" the input is done without displaying of the pressed keys.\n"); + } + else if (command == "reloadgm") + { + PRINTF("reloadGM\n"); + PRINTF(" Reload GM configuration file\n"); + } + else if (command == "search") + { + PRINTF("search \n"); + PRINTF(" Seek accounts.\n"); + PRINTF(" Displays the accounts whose names correspond.\n"); + } + else if (command == "sex") + { + PRINTF("sex \n"); + PRINTF(" Modify the sex of an account.\n"); + PRINTF(" sex testname Male\n"); + } + else if (command == "state") + { + PRINTF("state \n"); + PRINTF(" Change the state of an account.\n"); + PRINTF(" 'new_state': state is the state of the packet 0x006a + 1.\n"); + PRINTF(" The possibilities are:\n"); + PRINTF(" 0 = Account ok\n"); + PRINTF(" 1 = Unregistered ID\n"); + PRINTF(" 2 = Incorrect Password\n"); + PRINTF(" 3 = This ID is expired\n"); + PRINTF(" 4 = Rejected from Server\n"); + PRINTF(" 5 = You have been blocked by the GM Team\n"); + PRINTF(" 6 = Your Game's EXE file is not the latest version\n"); + PRINTF(" 7 = You are Prohibited to log in until...\n"); + PRINTF(" 8 = Server is jammed due to over populated\n"); + PRINTF(" 9 = No MSG\n"); + PRINTF(" 100 = This ID has been totally erased\n"); + PRINTF(" all other values are 'No MSG', then use state 9 please.\n"); + PRINTF(" 'error_message_#7': message of the code error 6\n"); + PRINTF(" = Your are Prohibited to log in until... (packet 0x006a)\n"); + } + else if (command == "timeadd") + { + PRINTF("timeadd \n"); + PRINTF(" Adds or substracts time from the validity limit of an account.\n"); + PRINTF(" Modifier is done as follows:\n"); + PRINTF(" Adjustment value (-1, 1, +1, etc...)\n"); + PRINTF(" Modified element:\n"); + PRINTF(" a or y: year\n"); + PRINTF(" m: month\n"); + PRINTF(" j or d: day\n"); + PRINTF(" h: hour\n"); + PRINTF(" mn: minute\n"); + PRINTF(" s: second\n"); + PRINTF(" timeadd testname +1m-2mn1s-6y\n"); + PRINTF(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + PRINTF(" and 6 years at the same time.\n"); + PRINTF("NOTE: You can not modify a unlimited validity limit.\n"); + PRINTF(" If you want modify it, you want probably create a limited validity limit.\n"); + PRINTF(" So, at first, you must set the validity limit to a date/time.\n"); + } + else if (command == "timeadd") + { + PRINTF("timeset yyyy/mm/dd [hh:mm:ss]\n"); + PRINTF(" Changes the validity limit of an account.\n"); + PRINTF(" Default time [hh:mm:ss]: 23:59:59.\n"); + PRINTF("timeset 0\n"); + PRINTF(" Gives an unlimited validity limit (0 = unlimited).\n"); + } + else if (command == "unban") + { + PRINTF("unban/unbanish \n"); + PRINTF(" Remove the banishment of an account.\n"); + PRINTF(" This command works like banset 0.\n"); + } + else if (command == "unblock") + { + PRINTF("unblock \n"); + PRINTF(" Set state 0 (Account ok) to an account.\n"); + PRINTF(" This command works like state 0.\n"); + } + else if (command == "version") + { + PRINTF("version\n"); + PRINTF(" Display the version of the login-server.\n"); + } + else if (command == "who") + { + PRINTF("who \n"); + PRINTF(" Displays complete information of an account.\n"); + } + else if (command == "quit" + || command == "exit" + || command == "end") + { + PRINTF("quit/end/exit\n"); + PRINTF(" End of the program of administration.\n"); + } + else + { + if (command) + PRINTF("Unknown command [%s] for help. Displaying of all commands.\n", + FString(command)); + PRINTF(" help/? -- Display this help\n"); + PRINTF(" help/? [command] -- Display the help of the command\n"); + PRINTF(" add -- Create an account with default email\n"); + PRINTF(" ban/banish yyyy/mm/dd hh:mm:ss -- Change final date of a ban\n"); + PRINTF(" banadd/ba -- Add or substract time from the final\n"); + PRINTF(" example: ba apple +1m-2mn1s-2y date of a banishment of an account\n"); + PRINTF(" banset/bs yyyy/mm/dd [hh:mm:ss] -- Change final date of a ban\n"); + PRINTF(" banset/bs 0 -- Un-banish an account\n"); + PRINTF(" block -- Set state 5 (blocked by the GM Team) to an account\n"); + PRINTF(" check -- Check the validity of a password\n"); + PRINTF(" create -- Create an account with email\n"); + PRINTF(" del -- Remove an account\n"); + PRINTF(" email -- Modify an email of an account\n"); + PRINTF(" getcount -- Give the number of players online\n"); + PRINTF(" gm [GM_level] -- Modify the GM level of an account\n"); + PRINTF(" id -- Give the id of an account\n"); + PRINTF(" info -- Display all information of an account\n"); + PRINTF(" itemfrob -- Map all items from one item ID to another\n"); + PRINTF(" kami -- Sends a broadcast message (in yellow)\n"); + PRINTF(" kamib -- Sends a broadcast message (in blue)\n"); + PRINTF(" list/ls [First_id [Last_id]] -- Display a list of accounts\n"); + PRINTF(" listBan/lsBan [First_id [Last_id] ] -- Display a list of accounts\n"); + PRINTF(" with state or banished\n"); + PRINTF(" listGM/lsGM [First_id [Last_id]] -- Display a list of GM accounts\n"); + PRINTF(" listOK/lsOK [First_id [Last_id] ] -- Display a list of accounts\n"); + PRINTF(" without state and not banished\n"); + PRINTF(" memo -- Modify the memo of an account\n"); + PRINTF(" name -- Give the name of an account\n"); + PRINTF(" passwd -- Change the password of an account\n"); + PRINTF(" quit/end/exit -- End of the program of administation\n"); + PRINTF(" reloadGM -- Reload GM configuration file\n"); + PRINTF(" search -- Seek accounts\n"); + PRINTF(" sex -- Modify the sex of an account\n"); + PRINTF(" state -- Change the state\n"); + PRINTF(" timeadd/ta -- Add or substract time from the\n"); + PRINTF(" example: ta apple +1m-2mn1s-2y validity limit of an account\n"); + PRINTF(" timeset/ts yyyy/mm/dd [hh:mm:ss] -- Change the validify limit\n"); + PRINTF(" timeset/ts 0 -- Give a unlimited validity limit\n"); + PRINTF(" unban/unbanish -- Remove the banishment of an account\n"); + PRINTF(" unblock -- Set state 0 (Account ok) to an account\n"); + PRINTF(" version -- Gives the version of the login-server\n"); + PRINTF(" who -- Display all information of an account\n"); + PRINTF(" who -- Display all information of an account\n"); + PRINTF(" Note: To use spaces in an account name, type \"\" (or ').\n"); + } +} + +//----------------------------- +// Sub-function: add an account +//----------------------------- +static +void addaccount(ZString param, int emailflag) +{ + AccountName name; + VString<1> sex_; + XString email_; + AccountPass password; + + if (emailflag == 0) + { + // add command + if (!qsplit(param, &name, &sex_, &password)) + { + PRINTF("Please input an account name, a sex and a password.\n"); + PRINTF(" add testname Male testpass\n"); + LADMIN_LOG("Incomplete parameters to create an account ('add' command).\n"); + return; + } + email_ = DEFAULT_EMAIL; + } + else + { + // 1: create command + if (!qsplit(param, &name, &sex_, &email_, &password)) + { + PRINTF("Please input an account name, a sex and a password.\n"); + PRINTF(" create testname Male my@mail.com testpass\n"); + LADMIN_LOG("Incomplete parameters to create an account ('create' command).\n"); + return; + } + } + char sex = sex_.front(); + if (!name.is_print()) + return; + + if (!XString("MF").contains(sex)) + { + PRINTF("Illegal gender [%c]. Please input M or F.\n", sex); + LADMIN_LOG("Illegal gender [%c]. Please input M or F.\n", sex); + return; + } + + if (!e_mail_check(email_)) + { + PRINTF("Invalid email [%s]. Please input a valid e-mail.\n", + FString(email_)); + LADMIN_LOG("Invalid email [%s]. Please input a valid e-mail.\n", + FString(email_)); + return; + } + AccountEmail email = stringish(email_); + + if (!password.is_print()) + return; + + LADMIN_LOG("Request to login-server to create an account.\n"); + + WFIFOW(login_fd, 0) = 0x7930; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFO_STRING(login_fd, 26, password, 24); + WFIFOB(login_fd, 50) = sex; + WFIFO_STRING(login_fd, 51, email, 40); + WFIFOSET(login_fd, 91); + bytes_to_read = 1; +} + +//--------------------------------------------------------------------------------- +// Sub-function: Add/substract time to the final date of a banishment of an account +//--------------------------------------------------------------------------------- +static +void banaddaccount(ZString param) +{ + AccountName name; + HumanTimeDiff modif {}; + + if (!qsplit(param, &name, &modif)) + { + PRINTF("Please input an account name and a modifier.\n"); + PRINTF(" : banadd testname +1m-2mn1s-6y\n"); + PRINTF(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + PRINTF(" and 6 years at the same time.\n"); + LADMIN_LOG("Incomplete parameters to modify the ban date/time of an account ('banadd' command).\n"); + return; + } + if (!name.is_print()) + return; + + if (!modif) + { + PRINTF("Please give an adjustment with this command:\n"); + PRINTF(" Adjustment value (-1, 1, +1, etc...)\n"); + PRINTF(" Modified element:\n"); + PRINTF(" a or y: year\n"); + PRINTF(" m: month\n"); + PRINTF(" j or d: day\n"); + PRINTF(" h: hour\n"); + PRINTF(" mn: minute\n"); + PRINTF(" s: second\n"); + PRINTF(" banadd testname +1m-2mn1s-6y\n"); + PRINTF(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + PRINTF(" and 6 years at the same time.\n"); + LADMIN_LOG("No adjustment isn't an adjustment ('banadd' command).\n"); + return; + } + + LADMIN_LOG("Request to login-server to modify a ban date/time.\n"); + + WFIFOW(login_fd, 0) = 0x794c; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFO_STRUCT(login_fd, 26, modif); + WFIFOSET(login_fd, 38); + bytes_to_read = 1; +} + +//----------------------------------------------------------------------- +// Sub-function of sub-function banaccount, unbanaccount or bansetaccount +// Set the final date of a banishment of an account +//----------------------------------------------------------------------- +static +void bansetaccountsub(AccountName name, XString date, XString time_) +{ + int year, month, day, hour, minute, second; + year = month = day = hour = minute = second = 0; + + // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban) + TimeT ban_until_time = TimeT(); + struct tm tmtime = ban_until_time; // initialize + + if (!name.is_print()) + return; + + if (date != "0" + && ((!extract(date, record<'/'>(&year, &month, &day)) + && !extract(date, record<'-'>(&year, &month, &day)) + && !extract(date, record<'.'>(&year, &month, &day))) + || !extract(time_, record<':'>(&hour, &minute, &second)))) + { + PRINTF("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n"); + PRINTF("You can imput 0 instead of if you use 'banset' command.\n"); + LADMIN_LOG("Invalid format for the date/time ('banset' or 'ban' command).\n"); + return; + } + + if (date == "0") + { + ban_until_time = TimeT(); + } + else + { + if (year < 70) + { + year = year + 100; + } + if (year >= 1900) + { + year = year - 1900; + } + if (month < 1 || month > 12) + { + PRINTF("Please give a correct value for the month (from 1 to 12).\n"); + LADMIN_LOG("Invalid month for the date ('banset' or 'ban' command).\n"); + return; + } + month = month - 1; + if (day < 1 || day > 31) + { + PRINTF("Please give a correct value for the day (from 1 to 31).\n"); + LADMIN_LOG("Invalid day for the date ('banset' or 'ban' command).\n"); + return; + } + if (((month == 3 || month == 5 || month == 8 || month == 10) + && day > 30) || (month == 1 && day > 29)) + { + PRINTF("Please give a correct value for a day of this month (%d).\n", + month); + LADMIN_LOG("Invalid day for this month ('banset' or 'ban' command).\n"); + return; + } + if (hour < 0 || hour > 23) + { + PRINTF("Please give a correct value for the hour (from 0 to 23).\n"); + LADMIN_LOG("Invalid hour for the time ('banset' or 'ban' command).\n"); + return; + } + if (minute < 0 || minute > 59) + { + PRINTF("Please give a correct value for the minutes (from 0 to 59).\n"); + LADMIN_LOG("Invalid minute for the time ('banset' or 'ban' command).\n"); + return; + } + if (second < 0 || second > 59) + { + PRINTF("Please give a correct value for the seconds (from 0 to 59).\n"); + LADMIN_LOG("Invalid second for the time ('banset' or 'ban' command).\n"); + return; + } + tmtime.tm_year = year; + tmtime.tm_mon = month; + tmtime.tm_mday = day; + tmtime.tm_hour = hour; + tmtime.tm_min = minute; + tmtime.tm_sec = second; + tmtime.tm_isdst = -1; // -1: no winter/summer time modification + ban_until_time = tmtime; + if (ban_until_time.error()) + { + PRINTF("Invalid date.\n"); + PRINTF("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n"); + PRINTF("You can imput 0 instead of if you use 'banset' command.\n"); + LADMIN_LOG("Invalid date. ('banset' or 'ban' command).\n"); + return; + } + } + + LADMIN_LOG("Request to login-server to set a ban.\n"); + + WFIFOW(login_fd, 0) = 0x794a; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFOL(login_fd, 26) = static_cast(ban_until_time); + WFIFOSET(login_fd, 30); + bytes_to_read = 1; +} + +//--------------------------------------------------------------------- +// Sub-function: Set the final date of a banishment of an account (ban) +//--------------------------------------------------------------------- +static +void banaccount(ZString param) +{ + AccountName name; + XString date; + XString time_; + + if (!qsplit(param, &date, &time_, &name)) + { + PRINTF("Please input an account name, a date and a hour.\n"); + PRINTF(": banset yyyy/mm/dd [hh:mm:ss]\n"); + PRINTF(" banset 0 (0 = un-banished)\n"); + PRINTF(" ban/banish yyyy/mm/dd hh:mm:ss \n"); + PRINTF(" unban/unbanish \n"); + PRINTF(" Default time [hh:mm:ss]: 23:59:59.\n"); + LADMIN_LOG("Incomplete parameters to set a ban ('banset' or 'ban' command).\n"); + return; + } + + if (!time_) + time_ = "23:59:59"; + + bansetaccountsub(name, date, time_); +} + +//------------------------------------------------------------------------ +// Sub-function: Set the final date of a banishment of an account (banset) +//------------------------------------------------------------------------ +static +void bansetaccount(ZString param) +{ + AccountName name; + XString date; + XString time_; + + if (!qsplit(param, &name, &date, &time_) + && !qsplit(param, &name, &date)) + { + PRINTF("Please input an account name, a date and a hour.\n"); + PRINTF(": banset yyyy/mm/dd [hh:mm:ss]\n"); + PRINTF(" banset 0 (0 = un-banished)\n"); + PRINTF(" ban/banish yyyy/mm/dd hh:mm:ss \n"); + PRINTF(" unban/unbanish \n"); + PRINTF(" Default time [hh:mm:ss]: 23:59:59.\n"); + LADMIN_LOG("Incomplete parameters to set a ban ('banset' or 'ban' command).\n"); + return; + } + + if (!time_) + time_ = "23:59:59"; + + bansetaccountsub(name, date, time_); +} + +//------------------------------------------------- +// Sub-function: unbanishment of an account (unban) +//------------------------------------------------- +static +void unbanaccount(ZString param) +{ + AccountName name; + + if (!qsplit(param, &name)) + { + PRINTF("Please input an account name.\n"); + PRINTF(": banset yyyy/mm/dd [hh:mm:ss]\n"); + PRINTF(" banset 0 (0 = un-banished)\n"); + PRINTF(" ban/banish yyyy/mm/dd hh:mm:ss \n"); + PRINTF(" unban/unbanish \n"); + PRINTF(" Default time [hh:mm:ss]: 23:59:59.\n"); + LADMIN_LOG("Incomplete parameters to set a ban ('unban' command).\n"); + return; + } + + bansetaccountsub(name, "0", ""); +} + +//--------------------------------------------------------- +// Sub-function: Asking to check the validity of a password +// (Note: never send back a password with login-server!! security of passwords) +//--------------------------------------------------------- +static +void checkaccount(ZString param) +{ + AccountName name; + AccountPass password; + + if (!qsplit(param, &name, &password)) + { + PRINTF("Please input an account name.\n"); + PRINTF(" check testname password\n"); + LADMIN_LOG("Incomplete parameters to check the password of an account ('check' command).\n"); + return; + } + + if (!name.is_print()) + return; + + if (!password.is_print()) + return; + + LADMIN_LOG("Request to login-server to check a password.\n"); + + WFIFOW(login_fd, 0) = 0x793a; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFO_STRING(login_fd, 26, password, 24); + WFIFOSET(login_fd, 50); + bytes_to_read = 1; +} + +//------------------------------------------------ +// Sub-function: Asking for deletion of an account +//------------------------------------------------ +static +void delaccount(ZString param) +{ + AccountName name; + + if (!qsplit(param, &name)) + { + PRINTF("Please input an account name.\n"); + PRINTF(" del testnametodelete\n"); + LADMIN_LOG("No name given to delete an account ('delete' command).\n"); + return; + } + + if (!name.is_print()) + return; + + char confirm; + do + { + PRINTF("\033[1;36m ** Are you really sure to DELETE account [%s]? (y/n) > \033[0m", name); + fflush(stdout); + int seek = getchar(); + confirm = seek; + if (seek == EOF) + confirm = 'n'; + else + while (seek != '\n' && seek != EOF) + seek = getchar(); + } + while (!XString("yn").contains(confirm)); + + if (confirm == 'n') + { + PRINTF("Deletion canceled.\n"); + LADMIN_LOG("Deletion canceled by user ('delete' command).\n"); + return; + } + + LADMIN_LOG("Request to login-server to delete an acount.\n"); + + WFIFOW(login_fd, 0) = 0x7932; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFOSET(login_fd, 26); + bytes_to_read = 1; +} + +//---------------------------------------------------------- +// Sub-function: Asking to modification of an account e-mail +//---------------------------------------------------------- +static +void changeemail(ZString param) +{ + AccountName name; + XString email_; + if (!qsplit(param, &name, &email_)) + { + PRINTF("Please input an account name and an email.\n"); + PRINTF(" email testname newemail\n"); + LADMIN_LOG("Incomplete parameters to change the email of an account ('email' command).\n"); + return; + } + + if (!name.is_print()) + return; + + if (!e_mail_check(email_)) + { + PRINTF("Invalid email [%s]. Please input a valid e-mail.\n", + FString(email_)); + LADMIN_LOG("Invalid email [%s]. Please input a valid e-mail.\n", + FString(email_)); + return; + } + AccountEmail email = stringish(email_); + + LADMIN_LOG("Request to login-server to change an email.\n"); + + WFIFOW(login_fd, 0) = 0x7940; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFO_STRING(login_fd, 26, email, 40); + WFIFOSET(login_fd, 66); + bytes_to_read = 1; +} + +//----------------------------------------------------- +// Sub-function: Asking of the number of online players +//----------------------------------------------------- +static +void getlogincount(void) +{ + LADMIN_LOG("Request to login-server to obtain the # of online players.\n"); + + WFIFOW(login_fd, 0) = 0x7938; + WFIFOSET(login_fd, 2); + bytes_to_read = 1; +} + +//---------------------------------------------------------- +// Sub-function: Asking to modify the GM level of an account +//---------------------------------------------------------- +static +void changegmlevel(ZString param) +{ + AccountName name; + int GM_level = 0; + + if (!qsplit(param, &name, &GM_level)) + { + PRINTF("Please input an account name and a GM level.\n"); + PRINTF(" gm testname 80\n"); + LADMIN_LOG("Incomplete parameters to change the GM level of an account ('gm' command).\n"); + return; + } + + if (!name.is_print()) + return; + + if (GM_level < 0 || GM_level > 99) + { + PRINTF("Illegal GM level [%d]. Please input a value from 0 to 99.\n", + GM_level); + LADMIN_LOG("Illegal GM level [%d]. The value can be from 0 to 99.\n", + GM_level); + return; + } + + LADMIN_LOG("Request to login-server to change a GM level.\n"); + + WFIFOW(login_fd, 0) = 0x793e; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFOB(login_fd, 26) = GM_level; + WFIFOSET(login_fd, 27); + bytes_to_read = 1; +} + +//--------------------------------------------- +// Sub-function: Asking to obtain an account id +//--------------------------------------------- +static +void idaccount(ZString param) +{ + AccountName name; + + if (!qsplit(param, &name)) + { + PRINTF("Please input an account name.\n"); + PRINTF(" id testname\n"); + LADMIN_LOG("No name given to search an account id ('id' command).\n"); + return; + } + + if (!name.is_print()) + { + return; + } + + LADMIN_LOG("Request to login-server to know an account id.\n"); + + WFIFOW(login_fd, 0) = 0x7944; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFOSET(login_fd, 26); + bytes_to_read = 1; +} + +//---------------------------------------------------------------------------- +// Sub-function: Asking to displaying information about an account (by its id) +//---------------------------------------------------------------------------- +static +void infoaccount(int account_id) +{ + if (account_id < 0) + { + PRINTF("Please input a positive value for the id.\n"); + LADMIN_LOG("Negative value was given to found the account.\n"); + return; + } + + LADMIN_LOG("Request to login-server to obtain information about an account (by its id).\n"); + + WFIFOW(login_fd, 0) = 0x7954; + WFIFOL(login_fd, 2) = account_id; + WFIFOSET(login_fd, 6); + bytes_to_read = 1; +} + +//--------------------------------------- +// Sub-function: Send a broadcast message +//--------------------------------------- +static +void sendbroadcast(ZString message) +{ + if (!message) + { + PRINTF("Please input a message.\n"); + { + PRINTF(" kami a message\n"); + } + LADMIN_LOG("The message is void ('kami' command).\n"); + return; + } + + WFIFOW(login_fd, 0) = 0x794e; + WFIFOW(login_fd, 2) = 0; + size_t len = message.size() + 1; + WFIFOL(login_fd, 4) = len; + WFIFO_STRING(login_fd, 8, message, len); + WFIFOSET(login_fd, 8 + len); + bytes_to_read = 1; +} + + +//-------------------------------------------------------- +// Sub-function: Asking to Displaying of the accounts list +//-------------------------------------------------------- +static +void listaccount(ZString param, int type) +{ +//int list_first, list_last, list_type; // parameter to display a list of accounts + list_type = type; + + // set default values + list_first = 0; + list_last = 0; + + if (list_type == 1) + { // if listgm + // get all accounts = use default + } + else if (list_type == 2) + { // if search + // get all accounts = use default + } + else if (list_type == 3) + { // if listban + // get all accounts = use default + } + else if (list_type == 4) + { // if listok + // get all accounts = use default + } + else + { + // if list (list_type == 0) + extract(param, record<' '>(&list_first, &list_last)); + if (list_first < 0) + list_first = 0; + if (list_last < list_first || list_last < 0) + list_last = 0; + } + + LADMIN_LOG("Request to login-server to obtain the list of accounts from %d to %d.\n", + list_first, list_last); + + WFIFOW(login_fd, 0) = 0x7920; + WFIFOL(login_fd, 2) = list_first; + WFIFOL(login_fd, 6) = list_last; + WFIFOSET(login_fd, 10); + bytes_to_read = 1; + + // 0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567 + Iprintf("account_id GM user_name sex count state\n"); + Iprintf("-------------------------------------------------------------------------------\n"); + list_count = 0; +} + +//-------------------------------------------------------- +// Sub-function: Frobnicate items +//-------------------------------------------------------- +static +int itemfrob(ZString param) +{ + int source_id, dest_id; + + if (!extract(param, record<' '>(&source_id, &dest_id))) + { + PRINTF("You must provide the source and destination item IDs.\n"); + return 1; + } + + WFIFOW(login_fd, 0) = 0x7924; + WFIFOL(login_fd, 2) = source_id; + WFIFOL(login_fd, 6) = dest_id; + WFIFOSET(login_fd, 10); + bytes_to_read = 1; // all logging is done to the three main servers + + return 0; +} + +//-------------------------------------------- +// Sub-function: Asking to modify a memo field +//-------------------------------------------- +static +void changememo(ZString param) +{ + AccountName name; + XString memo; + + if (!qsplit(param, &name, &memo) && !qsplit(param, &name)) + { + PRINTF("Please input an account name and a memo.\n"); + PRINTF(" memo testname new memo\n"); + LADMIN_LOG("Incomplete parameters to change the memo of an account ('email' command).\n"); + return; + } + + if (!name.is_print()) + return; + + size_t len = memo.size(); + size_t len1 = len + 1; + if (len > 254) + { + PRINTF("Memo is too long (%zu characters).\n", len); + PRINTF("Please input a memo of 254 bytes at the maximum.\n"); + LADMIN_LOG("Email is too long (%zu characters). Please input a memo of 254 bytes at the maximum.\n", + len); + return; + } + + LADMIN_LOG("Request to login-server to change a memo.\n"); + + WFIFOW(login_fd, 0) = 0x7942; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFOW(login_fd, 26) = len1; + WFIFO_STRING(login_fd, 28, memo, len); + WFIFOSET(login_fd, 28 + len1); + bytes_to_read = 1; +} + +//----------------------------------------------- +// Sub-function: Asking to obtain an account name +//----------------------------------------------- +static +void nameaccount(int id) +{ + if (id < 0) + { + PRINTF("Please input a positive value for the id.\n"); + LADMIN_LOG("Negativ id given to search an account name ('name' command).\n"); + return; + } + + LADMIN_LOG("Request to login-server to know an account name.\n"); + + WFIFOW(login_fd, 0) = 0x7946; + WFIFOL(login_fd, 2) = id; + WFIFOSET(login_fd, 6); + bytes_to_read = 1; +} + +//------------------------------------------ +// Sub-function: Asking to modify a password +// (Note: never send back a password with login-server!! security of passwords) +//------------------------------------------ +static +void changepasswd(ZString param) +{ + AccountName name; + AccountPass password; + + if (!qsplit(param, &name, &password)) + { + PRINTF("Please input an account name.\n"); + PRINTF(" passwd testname newpassword\n"); + LADMIN_LOG("Incomplete parameters to change the password of an account ('password' command).\n"); + return; + } + + if (!name.is_print()) + { + return; + } + + if (!password.is_print()) + return; + + LADMIN_LOG("Request to login-server to change a password.\n"); + + WFIFOW(login_fd, 0) = 0x7934; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFO_STRING(login_fd, 26, password, 24); + WFIFOSET(login_fd, 50); + bytes_to_read = 1; +} + +//---------------------------------------------------------------------- +// Sub-function: Request to login-server to reload GM configuration file +// this function have no answer +//---------------------------------------------------------------------- +static +void reloadGM(ZString params) +{ + WFIFOW(login_fd, 0) = 0x7955; + WFIFOSET(login_fd, 2); + bytes_to_read = 0; + + LADMIN_LOG("Request to reload the GM configuration file sended.\n"); + PRINTF("Request to reload the GM configuration file sended.\n"); + PRINTF("Check the actual GM accounts (after reloading):\n"); + listaccount(params, 1); // 1: to list only GM +} + +//----------------------------------------------------- +// Sub-function: Asking to modify the sex of an account +//----------------------------------------------------- +static +void changesex(ZString param) +{ + AccountName name; + VString<1> sex_; + + if (!qsplit(param, &name, &sex_)) + { + PRINTF("Please input an account name and a sex.\n"); + PRINTF(" sex testname Male\n"); + LADMIN_LOG("Incomplete parameters to change the sex of an account ('sex' command).\n"); + return; + } + char sex = sex_.front(); + + if (name.is_print()) + { + return; + } + + if (!XString("MF").contains(sex)) + { + PRINTF("Illegal gender [%c]. Please input M or F.\n", sex); + LADMIN_LOG("Illegal gender [%c]. Please input M or F.\n", sex); + return; + } + + LADMIN_LOG("Request to login-server to change a sex.\n"); + + WFIFOW(login_fd, 0) = 0x793c; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFOB(login_fd, 26) = sex; + WFIFOSET(login_fd, 27); + bytes_to_read = 1; +} + +//------------------------------------------------------------------------- +// Sub-function of sub-function changestate, blockaccount or unblockaccount +// Asking to modify the state of an account +//------------------------------------------------------------------------- +static +void changestatesub(AccountName name, int state, XString error_message) +{ + if ((state < 0 || state > 9) && state != 100) + { // Valid values: 0: ok, or value of the 0x006a packet + 1 + PRINTF("Please input one of these states:\n"); + PRINTF(" 0 = Account ok 6 = Your Game's EXE file is not the latest version\n"); + PRINTF(" 1 = Unregistered ID 7 = You are Prohibited to log in until + message\n"); + PRINTF(" 2 = Incorrect Password 8 = Server is jammed due to over populated\n"); + PRINTF(" 3 = This ID is expired 9 = No MSG\n"); + PRINTF(" 4 = Rejected from Server 100 = This ID has been totally erased\n"); + PRINTF(" 5 = You have been blocked by the GM Team\n"); + PRINTF(" state testname 5\n"); + PRINTF(" state testname 7 end of your ban\n"); + PRINTF(" block \n"); + PRINTF(" unblock \n"); + LADMIN_LOG("Invalid value for the state of an account ('state', 'block' or 'unblock' command).\n"); + return; + } + + if (!name.is_print()) + return; + + if (state != 7) + { + error_message = "-"; + } + else + { + if (error_message.size() < 1) + { + PRINTF("Error message is too short. Please input a message of 1-19 bytes.\n"); + LADMIN_LOG("Error message is too short. Please input a message of 1-19 bytes.\n"); + return; + } + if (error_message.size() > 19) + { + PRINTF("Error message is too long. Please input a message of 1-19 bytes.\n"); + LADMIN_LOG("Error message is too long. Please input a message of 1-19 bytes.\n"); + return; + } + } + + LADMIN_LOG("Request to login-server to change a state.\n"); + + WFIFOW(login_fd, 0) = 0x7936; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFOL(login_fd, 26) = state; + WFIFO_STRING(login_fd, 30, error_message, 20); + WFIFOSET(login_fd, 50); + bytes_to_read = 1; +} + +//------------------------------------------------------- +// Sub-function: Asking to modify the state of an account +//------------------------------------------------------- +static +void changestate(ZString param) +{ + AccountName name; + int state; + XString error_message; + + if (!qsplit(param, &name, &state, &error_message) && !qsplit(param, &name, &state)) + { + PRINTF("Please input an account name and a state.\n"); + PRINTF(" state testname 5\n"); + PRINTF(" state testname 7 end of your ban\n"); + PRINTF(" block \n"); + PRINTF(" unblock \n"); + LADMIN_LOG("Incomplete parameters to change the state of an account ('state' command).\n"); + return; + } + + changestatesub(name, state, error_message); +} + +//------------------------------------------- +// Sub-function: Asking to unblock an account +//------------------------------------------- +static +void unblockaccount(ZString param) +{ + AccountName name; + + if (!qsplit(param, &name)) + { + PRINTF("Please input an account name.\n"); + PRINTF(" state testname 5\n"); + PRINTF(" state testname 7 end of your ban\n"); + PRINTF(" block \n"); + PRINTF(" unblock \n"); + LADMIN_LOG("Incomplete parameters to change the state of an account ('unblock' command).\n"); + return; + } + + changestatesub(name, 0, "-"); // state 0, no error message +} + +//------------------------------------------- +// Sub-function: Asking to unblock an account +//------------------------------------------- +static +void blockaccount(ZString param) +{ + AccountName name; + + if (!qsplit(param, &name)) + { + PRINTF("Please input an account name.\n"); + PRINTF(" state testname 5\n"); + PRINTF(" state testname 7 end of your ban\n"); + PRINTF(" block \n"); + PRINTF(" unblock \n"); + LADMIN_LOG("Incomplete parameters to change the state of an account ('block' command).\n"); + return; + } + + changestatesub(name, 5, "-"); // state 5, no error message +} + +//--------------------------------------------------------------------- +// Sub-function: Add/substract time to the validity limit of an account +//--------------------------------------------------------------------- +static +void timeaddaccount(ZString param) +{ + AccountName name; + HumanTimeDiff modif {}; + + if (!qsplit(param, &name, &modif)) + { + PRINTF("Please input an account name and a modifier.\n"); + PRINTF(" : timeadd testname +1m-2mn1s-6y\n"); + PRINTF(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + PRINTF(" and 6 years at the same time.\n"); + LADMIN_LOG("Incomplete parameters to modify a limit time ('timeadd' command).\n"); + return; + } + if (name.is_print()) + { + return; + } + + if (!modif) + { + PRINTF("Please give an adjustment with this command:\n"); + PRINTF(" Adjustment value (-1, 1, +1, etc...)\n"); + PRINTF(" Modified element:\n"); + PRINTF(" a or y: year\n"); + PRINTF(" m: month\n"); + PRINTF(" j or d: day\n"); + PRINTF(" h: hour\n"); + PRINTF(" mn: minute\n"); + PRINTF(" s: second\n"); + PRINTF(" timeadd testname +1m-2mn1s-6y\n"); + PRINTF(" this example adds 1 month and 1 second, and substracts 2 minutes\n"); + PRINTF(" and 6 years at the same time.\n"); + LADMIN_LOG("No adjustment isn't an adjustment ('timeadd' command).\n"); + return; + } + + LADMIN_LOG("Request to login-server to modify a time limit.\n"); + + WFIFOW(login_fd, 0) = 0x7950; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFO_STRUCT(login_fd, 26, modif); + WFIFOSET(login_fd, 38); + bytes_to_read = 1; +} + +//------------------------------------------------- +// Sub-function: Set a validity limit of an account +//------------------------------------------------- +static +void timesetaccount(ZString param) +{ + AccountName name; + XString date; + XString time_; + int year, month, day, hour, minute, second; + + year = month = day = hour = minute = second = 0; + + // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited) + TimeT connect_until_time = TimeT(); + struct tm tmtime = connect_until_time; // initialize + + if (!qsplit(param, &name, &date, &time_) + && !qsplit(param, &name, &date)) + { + PRINTF("Please input an account name, a date and a hour.\n"); + PRINTF(": timeset yyyy/mm/dd [hh:mm:ss]\n"); + PRINTF(" timeset 0 (0 = unlimited)\n"); + PRINTF(" Default time [hh:mm:ss]: 23:59:59.\n"); + LADMIN_LOG("Incomplete parameters to set a limit time ('timeset' command).\n"); + return; + } + if (!name.is_print()) + return; + + if (!time_) + time_ = "23:59:59"; + + if (date != "0" + && ((!extract(date, record<'/'>(&year, &month, &day)) + && !extract(date, record<'-'>(&year, &month, &day)) + && !extract(date, record<'.'>(&year, &month, &day))) + || !extract(time_, record<':'>(&hour, &minute, &second)))) + { + PRINTF("Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"); + LADMIN_LOG("Invalid format for the date/time ('timeset' command).\n"); + return; + } + + if (date == "0") + { + connect_until_time = TimeT(); + } + else + { + if (year < 70) + { + year = year + 100; + } + if (year >= 1900) + { + year = year - 1900; + } + if (month < 1 || month > 12) + { + PRINTF("Please give a correct value for the month (from 1 to 12).\n"); + LADMIN_LOG("Invalid month for the date ('timeset' command).\n"); + return; + } + month = month - 1; + if (day < 1 || day > 31) + { + PRINTF("Please give a correct value for the day (from 1 to 31).\n"); + LADMIN_LOG("Invalid day for the date ('timeset' command).\n"); + return; + } + if (((month == 3 || month == 5 || month == 8 || month == 10) + && day > 30) ||(month == 1 && day > 29)) + { + PRINTF("Please give a correct value for a day of this month (%d).\n", + month); + LADMIN_LOG("Invalid day for this month ('timeset' command).\n"); + return; + } + if (hour < 0 || hour > 23) + { + PRINTF("Please give a correct value for the hour (from 0 to 23).\n"); + LADMIN_LOG("Invalid hour for the time ('timeset' command).\n"); + return; + } + if (minute < 0 || minute > 59) + { + PRINTF("Please give a correct value for the minutes (from 0 to 59).\n"); + LADMIN_LOG("Invalid minute for the time ('timeset' command).\n"); + return; + } + if (second < 0 || second > 59) + { + PRINTF("Please give a correct value for the seconds (from 0 to 59).\n"); + LADMIN_LOG("Invalid second for the time ('timeset' command).\n"); + return; + } + tmtime.tm_year = year; + tmtime.tm_mon = month; + tmtime.tm_mday = day; + tmtime.tm_hour = hour; + tmtime.tm_min = minute; + tmtime.tm_sec = second; + tmtime.tm_isdst = -1; // -1: no winter/summer time modification + connect_until_time = tmtime; + if (connect_until_time.error()) + { + PRINTF("Invalid date.\n"); + PRINTF("Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n"); + LADMIN_LOG("Invalid date. ('timeset' command).\n"); + return; + } + } + + LADMIN_LOG("Request to login-server to set a time limit.\n"); + + WFIFOW(login_fd, 0) = 0x7948; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFOL(login_fd, 26) = static_cast(connect_until_time); + WFIFOSET(login_fd, 30); + bytes_to_read = 1; +} + +//------------------------------------------------------------------------------ +// Sub-function: Asking to displaying information about an account (by its name) +//------------------------------------------------------------------------------ +static +void whoaccount(ZString param) +{ + AccountName name; + + if (!qsplit(param, &name)) + { + PRINTF("Please input an account name.\n"); + PRINTF(" who testname\n"); + LADMIN_LOG("No name was given to found the account.\n"); + return; + } + if (!name.is_print()) + { + return; + } + + LADMIN_LOG("Request to login-server to obtain information about an account (by its name).\n"); + + WFIFOW(login_fd, 0) = 0x7952; + WFIFO_STRING(login_fd, 2, name, 24); + WFIFOSET(login_fd, 26); + bytes_to_read = 1; +} + +//-------------------------------------------------------- +// Sub-function: Asking of the version of the login-server +//-------------------------------------------------------- +static +void checkloginversion(void) +{ + LADMIN_LOG("Request to login-server to obtain its version.\n"); + + WFIFOW(login_fd, 0) = 0x7530; + WFIFOSET(login_fd, 2); + bytes_to_read = 1; +} + +//--------------------------------------------- +// Prompt function +// this function wait until user type a command +// and analyse the command. +//--------------------------------------------- +static +void prompt(void) +{ + // while we don't wait new packets + while (bytes_to_read == 0) + { + // for help with the console colors look here: + // http://www.edoceo.com/liberum/?doc=PRINTF-with-color + // some code explanation (used here): + // \033[2J : clear screen and go up/left (0, 0 position) + // \033[K : clear line from actual position to end of the line + // \033[0m : reset color parameter + // \033[1m : use bold for font + Iprintf("\n"); + Iprintf("\033[32mTo list the commands, type 'enter'.\033[0m\n"); + Iprintf("\033[0;36mLadmin-> \033[0m"); + Iprintf("\033[1m"); + fflush(stdout); + + // get command and parameter + FString buf; + io::getline(std::cin, buf); + + Iprintf("\033[0m"); + fflush(stdout); + + if (!std::cin) + exit(0); + + if (!buf.is_print()) + { + printf("Cowardly refusing to execute a command that includes control or non-ascii characters\n"); + LADMIN_LOG("Cowardly refusing to execute a command that includes control or non-ascii characters\n"); + continue; + } + + // extract command name and parameters + auto space = std::find(buf.begin(), buf.end(), ' '); + FString command = buf.xislice_h(space); + while (*space == ' ') + ++space; + + parameters = buf.xislice_t(space); + + if (!command || command.startswith('?')) + command = "help"; + + if (!parameters) + { + LADMIN_LOG("Command: '%s' (without parameters)\n", + command); + } + else + { + LADMIN_LOG("Command: '%s', parameters: '%s'\n", + command, parameters); + } + + // Analyse of the command + if (command == "help") + display_help(parameters); + else if (command == "add") + addaccount(parameters, 0); // 0: no email + else if (command == "ban") + banaccount(parameters); + else if (command == "banadd") + banaddaccount(parameters); + else if (command == "banset") + bansetaccount(parameters); + else if (command == "block") + blockaccount(parameters); + else if (command == "check") + checkaccount(parameters); + else if (command == "create") + addaccount(parameters, 1); // 1: with email + else if (command == "delete") + delaccount(parameters); + else if (command == "email") + changeemail(parameters); + else if (command == "getcount") + getlogincount(); + else if (command == "gm") + changegmlevel(parameters); + else if (command == "id") + idaccount(parameters); + else if (command == "info") + infoaccount(atoi(parameters.c_str())); + else if (command == "kami") + sendbroadcast(parameters); // flag for normal + else if (command == "itemfrob") + itemfrob(parameters); // 0: to list all + else if (command == "list") + listaccount(parameters, 0); // 0: to list all + else if (command == "listban") + listaccount(parameters, 3); // 3: to list only accounts with state or bannished + else if (command == "listgm") + listaccount(parameters, 1); // 1: to list only GM + else if (command == "listok") + listaccount(parameters, 4); // 4: to list only accounts without state and not bannished + else if (command == "memo") + changememo(parameters); + else if (command == "name") + nameaccount(atoi(parameters.c_str())); + else if (command == "password") + changepasswd(parameters); + else if (command == "reloadgm") + reloadGM(parameters); + else if (command == "search") + listaccount(parameters, 2); // 2: to list with pattern + else if (command == "sex") + changesex(parameters); + else if (command == "state") + changestate(parameters); + else if (command == "timeadd") + timeaddaccount(parameters); + else if (command == "timeset") + timesetaccount(parameters); + else if (command == "unban") + unbanaccount(parameters); + else if (command == "unblock") + unblockaccount(parameters); + else if (command == "version") + checkloginversion(); + else if (command == "who") + whoaccount(parameters); + else if (command == "quit" + || command == "exit" + || command == "end") + { + PRINTF("Bye.\n"); + exit(0); + } + else + { + PRINTF("Unknown command [%s].\n", buf); + LADMIN_LOG("Unknown command [%s].\n", buf); + } + } +} + +//------------------------------------------------------------- +// Function: Parse receiving informations from the login-server +//------------------------------------------------------------- +static +void parse_fromlogin(int fd) +{ + if (session[fd]->eof) + { + PRINTF("Impossible to have a connection with the login-server [%s:%d] !\n", + login_ip, login_port); + LADMIN_LOG("Impossible to have a connection with the login-server [%s:%d] !\n", + login_ip, login_port); + delete_session(fd); + exit(0); + } + +// PRINTF("parse_fromlogin : %d %d %d\n", fd, RFIFOREST(fd), RFIFOW(fd,0)); + + while (RFIFOREST(fd) >= 2) + { + switch (RFIFOW(fd, 0)) + { + case 0x7919: // answer of a connection request + if (RFIFOREST(fd) < 3) + return; + if (RFIFOB(fd, 2) != 0) + { + PRINTF("Error at login:\n"); + PRINTF(" - incorrect password,\n"); + PRINTF(" - administration system not activated, or\n"); + PRINTF(" - unauthorised IP.\n"); + LADMIN_LOG("Error at login: incorrect password, administration system not activated, or unauthorised IP.\n"); + session[fd]->eof = 1; + //bytes_to_read = 1; // not stop at prompt + } + else + { + Iprintf("Established connection.\n"); + LADMIN_LOG("Established connection.\n"); + Iprintf("Reading of the version of the login-server...\n"); + LADMIN_LOG("Reading of the version of the login-server...\n"); + //bytes_to_read = 1; // unchanged + checkloginversion(); + } + RFIFOSKIP(fd, 3); + break; + + case 0x7531: // Displaying of the version of the login-server + if (RFIFOREST(fd) < 10) + return; + { + Iprintf(" Login-Server [%s:%d]\n", + login_ip, login_port); + Version version; + RFIFO_STRUCT(login_fd, 2, version); + Iprintf(" tmwA version %hhu.%hhu.%hhu (dev? %hhu) (flags %hhx) (which %hhx) (vend %hu)\n", + version.major, version.minor, version.patch, + version.devel, + + version.flags, version.which, + version.vend); + } + bytes_to_read = 0; + RFIFOSKIP(fd, 10); + break; + + case 0x7925: // Itemfrob-OK + RFIFOSKIP(fd, 2); + bytes_to_read = 0; + break; + + case 0x7921: // Displaying of the list of accounts + if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd, 2)) + return; + if (RFIFOW(fd, 2) < 5) + { + LADMIN_LOG(" Receiving of a void accounts list.\n"); + if (list_count == 0) + { + Iprintf("No account found.\n"); + } + else if (list_count == 1) + { + Iprintf("1 account found.\n"); + } + else + Iprintf("%d accounts found.\n", list_count); + bytes_to_read = 0; + } + else + { + int i; + LADMIN_LOG(" Receiving of a accounts list.\n"); + for (i = 4; i < RFIFOW(fd, 2); i += 38) + { + AccountName userid = stringish(RFIFO_STRING<24>(fd, i + 5)); + VString<23> lower_userid = userid.to_lower(); + list_first = RFIFOL(fd, i) + 1; + // here are checks... + if (list_type == 0 + || (list_type == 1 && RFIFOB(fd, i + 4) > 0) + || (list_type == 2 && lower_userid.contains_seq(parameters)) + || (list_type == 3 && RFIFOL(fd, i + 34) != 0) + || (list_type == 4 && RFIFOL(fd, i + 34) == 0)) + { + PRINTF("%10d ", RFIFOL(fd, i)); + if (RFIFOB(fd, i + 4) == 0) + PRINTF(" "); + else + PRINTF("%2d ", RFIFOB(fd, i + 4)); + PRINTF("%-24s", userid); + if (RFIFOB(fd, i + 29) == 0) + PRINTF("%-5s ", "Femal"); + else if (RFIFOB(fd, i + 29) == 1) + PRINTF("%-5s ", "Male"); + else + PRINTF("%-5s ", "Servr"); + PRINTF("%6d ", RFIFOL(fd, i + 30)); + switch (RFIFOL(fd, i + 34)) + { + case 0: + PRINTF("%-27s\n", "Account OK"); + break; + case 1: + PRINTF("%-27s\n", "Unregistered ID"); + break; + case 2: + PRINTF("%-27s\n", "Incorrect Password"); + break; + case 3: + PRINTF("%-27s\n", "This ID is expired"); + break; + case 4: + PRINTF("%-27s\n", + "Rejected from Server"); + break; + case 5: + PRINTF("%-27s\n", "Blocked by the GM Team"); // You have been blocked by the GM Team + break; + case 6: + PRINTF("%-27s\n", "Your EXE file is too old"); // Your Game's EXE file is not the latest version + break; + case 7: + PRINTF("%-27s\n", "Banishement or"); + PRINTF(" Prohibited to login until...\n"); // You are Prohibited to log in until %s + break; + case 8: + PRINTF("%-27s\n", + "Server is over populated"); + break; + case 9: + PRINTF("%-27s\n", "No MSG"); + break; + default: // 100 + PRINTF("%-27s\n", "This ID is totally erased"); // This ID has been totally erased + break; + } + list_count++; + } + } + // asking of the following acounts + LADMIN_LOG("Request to login-server to obtain the list of accounts from %d to %d (complement).\n", + list_first, list_last); + WFIFOW(login_fd, 0) = 0x7920; + WFIFOL(login_fd, 2) = list_first; + WFIFOL(login_fd, 6) = list_last; + WFIFOSET(login_fd, 10); + bytes_to_read = 1; + } + RFIFOSKIP(fd, RFIFOW(fd, 2)); + break; + + case 0x7931: // Answer of login-server about an account creation + if (RFIFOREST(fd) < 30) + return; + { + int accid = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (accid == -1) + { + PRINTF("Account [%s] creation failed. Same account already exists.\n", + name); + LADMIN_LOG("Account [%s] creation failed. Same account already exists.\n", + name); + } + else + { + PRINTF("Account [%s] is successfully created [id: %d].\n", + name, accid); + LADMIN_LOG("Account [%s] is successfully created [id: %d].\n", + name, accid); + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 30); + break; + + case 0x7933: // Answer of login-server about an account deletion + if (RFIFOREST(fd) < 30) + return; + { + int accid = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (accid == -1) + { + PRINTF("Account [%s] deletion failed. Account doesn't exist.\n", + name); + LADMIN_LOG("Account [%s] deletion failed. Account doesn't exist.\n", + name); + } + else + { + PRINTF("Account [%s][id: %d] is successfully DELETED.\n", + name, accid); + LADMIN_LOG("Account [%s][id: %d] is successfully DELETED.\n", + name, accid); + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 30); + break; + + case 0x7935: // answer of the change of an account password + if (RFIFOREST(fd) < 30) + return; + { + int accid = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (accid == -1) + { + PRINTF("Account [%s] password changing failed.\n", + name); + PRINTF("Account [%s] doesn't exist.\n", + name); + LADMIN_LOG("Account password changing failed. The compte [%s] doesn't exist.\n", + name); + } + else + { + PRINTF("Account [%s][id: %d] password successfully changed.\n", + name, accid); + LADMIN_LOG("Account [%s][id: %d] password successfully changed.\n", + name, accid); + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 30); + break; + + case 0x7937: // answer of the change of an account state + if (RFIFOREST(fd) < 34) + return; + { + int accid = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + int state = RFIFOL(fd, 30); + if (accid == -1) + { + PRINTF("Account [%s] state changing failed. Account doesn't exist.\n", + name); + LADMIN_LOG("Account [%s] state changing failed. Account doesn't exist.\n", + name); + } + else + { + MString tmpstr; + tmpstr += STRPRINTF( + "Account [%s] state successfully changed in [", + name); + switch (state) + { + case 0: + tmpstr += "0: Account OK"; + break; + case 1: + tmpstr += "1: Unregistered ID"; + break; + case 2: + tmpstr += "2: Incorrect Password"; + break; + case 3: + tmpstr += "3: This ID is expired"; + break; + case 4: + tmpstr += "4: Rejected from Server"; + break; + case 5: + tmpstr += "5: You have been blocked by the GM Team"; + break; + case 6: + tmpstr += "6: [Your Game's EXE file is not the latest version"; + break; + case 7: + tmpstr += "7: You are Prohibited to log in until..."; + break; + case 8: + tmpstr += "8: Server is jammed due to over populated"; + break; + case 9: + tmpstr += "9: No MSG"; + break; + default: // 100 + tmpstr += "100: This ID is totally erased"; + break; + } + tmpstr += ']'; + FString tmpstr_ = FString(tmpstr); + PRINTF("%s\n", tmpstr_); + LADMIN_LOG("%s\n", tmpstr_); + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 34); + break; + + case 0x7939: // answer of the number of online players + if (RFIFOREST(fd) < 4 || RFIFOREST(fd) < RFIFOW(fd, 2)) + return; + { + // Get length of the received packet + LADMIN_LOG(" Receiving of the number of online players.\n"); + // Read information of the servers + if (RFIFOW(fd, 2) < 5) + { + PRINTF(" No server is connected to the login-server.\n"); + } + else + { + PRINTF(" Number of online players (server: number).\n"); + // Displaying of result + for (int i = 4; i < RFIFOW(fd, 2); i += 32) + { + ServerName name = stringish(RFIFO_STRING<20>(fd, i + 6)); + PRINTF(" %-20s : %5d\n", name, + RFIFOW(fd, i + 26)); + } + } + } + bytes_to_read = 0; + RFIFOSKIP(fd, RFIFOW(fd, 2)); + break; + + case 0x793b: // answer of the check of a password + if (RFIFOREST(fd) < 30) + return; + { + int account_id = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (account_id == -1) + { + PRINTF("The account [%s] doesn't exist or the password is incorrect.\n", + name); + LADMIN_LOG("The account [%s] doesn't exist or the password is incorrect.\n", + name); + } + else + { + PRINTF("The proposed password is correct for the account [%s][id: %d].\n", + name, account_id); + LADMIN_LOG("The proposed password is correct for the account [%s][id: %d].\n", + name, account_id); + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 30); + break; + + case 0x793d: // answer of the change of an account sex + if (RFIFOREST(fd) < 30) + return; + { + int account_id = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (account_id == -1) + { + PRINTF("Account [%s] sex changing failed.\n", + name); + PRINTF("Account [%s] doesn't exist or the sex is already the good sex.\n", + name); + LADMIN_LOG("Account sex changing failed. The compte [%s] doesn't exist or the sex is already the good sex.\n", + name); + } + else + { + PRINTF("Account [%s][id: %d] sex successfully changed.\n", + name, account_id); + LADMIN_LOG("Account [%s][id: %d] sex successfully changed.\n", + name, account_id); + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 30); + break; + + case 0x793f: // answer of the change of an account GM level + if (RFIFOREST(fd) < 30) + return; + { + int account_id = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (account_id == -1) + { + PRINTF("Account [%s] GM level changing failed.\n", + name); + PRINTF("Account [%s] doesn't exist, the GM level is already the good GM level\n", + name); + PRINTF("or it's impossible to modify the GM accounts file.\n"); + LADMIN_LOG("Account GM level changing failed. The compte [%s] doesn't exist, the GM level is already the good sex or it's impossible to modify the GM accounts file.\n", + name); + } + else + { + PRINTF("Account [%s][id: %d] GM level successfully changed.\n", + name, account_id); + LADMIN_LOG("Account [%s][id: %d] GM level successfully changed.\n", + name, account_id); + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 30); + break; + + case 0x7941: // answer of the change of an account email + if (RFIFOREST(fd) < 30) + return; + { + int account_id = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (account_id == -1) + { + PRINTF("Account [%s] e-mail changing failed.\n", + name); + PRINTF("Account [%s] doesn't exist.\n", + name); + LADMIN_LOG("Account e-mail changing failed. The compte [%s] doesn't exist.\n", + name); + } + else + { + PRINTF("Account [%s][id: %d] e-mail successfully changed.\n", + name, account_id); + LADMIN_LOG("Account [%s][id: %d] e-mail successfully changed.\n", + name, account_id); + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 30); + break; + + case 0x7943: // answer of the change of an account memo + if (RFIFOREST(fd) < 30) + return; + { + int account_id = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (account_id == -1) + { + PRINTF("Account [%s] memo changing failed. Account doesn't exist.\n", + name); + LADMIN_LOG("Account [%s] memo changing failed. Account doesn't exist.\n", + name); + } + else + { + PRINTF("Account [%s][id: %d] memo successfully changed.\n", + name, account_id); + LADMIN_LOG("Account [%s][id: %d] memo successfully changed.\n", + name, account_id); + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 30); + break; + + case 0x7945: // answer of an account id search + if (RFIFOREST(fd) < 30) + return; + { + int account_id = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (account_id == -1) + { + PRINTF("Unable to find the account [%s] id. Account doesn't exist.\n", + name); + LADMIN_LOG("Unable to find the account [%s] id. Account doesn't exist.\n", + name); + } + else + { + PRINTF("The account [%s] have the id: %d.\n", + name, account_id); + LADMIN_LOG("The account [%s] have the id: %d.\n", + name, account_id); + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 30); + break; + + case 0x7947: // answer of an account name search + if (RFIFOREST(fd) < 30) + return; + { + int account_id = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (!name) + { + PRINTF("Unable to find the account [%d] name. Account doesn't exist.\n", + account_id); + LADMIN_LOG("Unable to find the account [%d] name. Account doesn't exist.\n", + account_id); + } + else + { + PRINTF("The account [id: %d] have the name: %s.\n", + account_id, name); + LADMIN_LOG("The account [id: %d] have the name: %s.\n", + account_id, name); + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 30); + break; + + case 0x7949: // answer of an account validity limit set + if (RFIFOREST(fd) < 34) + return; + { + int account_id = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (RFIFOL(fd, 2) == -1) + { + PRINTF("Account [%s] validity limit changing failed. Account doesn't exist.\n", + name); + LADMIN_LOG("Account [%s] validity limit changing failed. Account doesn't exist.\n", + name); + } + else + { + TimeT timestamp = static_cast(RFIFOL(fd, 30)); + if (!timestamp) + { + PRINTF("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited].\n", + name, account_id); + LADMIN_LOG("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited].\n", + name, account_id); + } + else + { + timestamp_seconds_buffer tmpstr; + stamp_time(tmpstr, ×tamp); + PRINTF("Validity Limit of the account [%s][id: %d] successfully changed to be until %s.\n", + name, account_id, tmpstr); + LADMIN_LOG("Validity Limit of the account [%s][id: %d] successfully changed to be until %s.\n", + name, account_id, + tmpstr); + } + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 34); + break; + + case 0x794b: // answer of an account ban set + if (RFIFOREST(fd) < 34) + return; + { + int account_id = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (account_id == -1) + { + PRINTF("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", + name); + LADMIN_LOG("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", + name); + } + else + { + TimeT timestamp = static_cast(RFIFOL(fd, 30)); + if (!timestamp) + { + PRINTF("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", + name, account_id); + LADMIN_LOG("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", + name, account_id); + } + else + { + timestamp_seconds_buffer tmpstr; + stamp_time(tmpstr, ×tamp); + PRINTF("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", + name, RFIFOL(fd, 2), tmpstr); + LADMIN_LOG("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", + name, RFIFOL(fd, 2), + tmpstr); + } + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 34); + break; + + case 0x794d: // answer of an account ban date/time changing + if (RFIFOREST(fd) < 34) + return; + { + int account_id = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (account_id == -1) + { + PRINTF("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", + name); + LADMIN_LOG("Account [%s] final date of banishment changing failed. Account doesn't exist.\n", + name); + } + else + { + TimeT timestamp = static_cast(RFIFOL(fd, 30)); + if (!timestamp) + { + PRINTF("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", + name, account_id); + LADMIN_LOG("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n", + name, account_id); + } + else + { + timestamp_seconds_buffer tmpstr; + stamp_time(tmpstr, ×tamp); + PRINTF("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", + name, account_id, + tmpstr); + LADMIN_LOG("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n", + name, account_id, + tmpstr); + } + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 34); + break; + + case 0x794f: // answer of a broadcast + if (RFIFOREST(fd) < 4) + return; + if (RFIFOW(fd, 2) == static_cast(-1)) + { + PRINTF("Message sending failed. No online char-server.\n"); + LADMIN_LOG("Message sending failed. No online char-server.\n"); + } + else + { + PRINTF("Message successfully sended to login-server.\n"); + LADMIN_LOG("Message successfully sended to login-server.\n"); + } + bytes_to_read = 0; + RFIFOSKIP(fd, 4); + break; + + case 0x7951: // answer of an account validity limit changing + if (RFIFOREST(fd) < 34) + return; + { + int account_id = RFIFOL(fd, 2); + AccountName name = stringish(RFIFO_STRING<24>(fd, 6)); + if (account_id == -1) + { + PRINTF("Account [%s] validity limit changing failed. Account doesn't exist.\n", + name); + LADMIN_LOG("Account [%s] validity limit changing failed. Account doesn't exist.\n", + name); + } + else + { + TimeT timestamp = static_cast(RFIFOL(fd, 30)); + if (!timestamp) + { + PRINTF("Validity limit of the account [%s][id: %d] unchanged.\n", + name, account_id); + PRINTF("The account have an unlimited validity limit or\n"); + PRINTF("the changing is impossible with the proposed adjustments.\n"); + LADMIN_LOG("Validity limit of the account [%s][id: %d] unchanged. The account have an unlimited validity limit or the changing is impossible with the proposed adjustments.\n", + name, account_id); + } + else + { + timestamp_seconds_buffer tmpstr; + stamp_time(tmpstr, ×tamp); + PRINTF("Validity limit of the account [%s][id: %d] successfully changed to be until %s.\n", + name, account_id, + tmpstr); + LADMIN_LOG("Validity limit of the account [%s][id: %d] successfully changed to be until %s.\n", + name, account_id, + tmpstr); + } + } + bytes_to_read = 0; + } + RFIFOSKIP(fd, 34); + break; + + case 0x7953: // answer of a request about informations of an account (by account name/id) + if (RFIFOREST(fd) < 150 + || RFIFOREST(fd) < (150 + RFIFOW(fd, 148))) + return; + { + int account_id = RFIFOL(fd, 2); + uint8_t gm = RFIFOB(fd, 6); + AccountName userid = stringish(RFIFO_STRING<24>(fd, 7)); + uint8_t sex = RFIFOB(fd, 31); + int connections = RFIFOL(fd, 32); + int state = RFIFOL(fd, 36); + timestamp_seconds_buffer error_message = stringish(RFIFO_STRING<20>(fd, 40)); + timestamp_milliseconds_buffer lastlogin = stringish(RFIFO_STRING<24>(fd, 60)); + VString<15> last_ip_ = RFIFO_STRING<16>(fd, 84); + AccountEmail email = stringish(RFIFO_STRING<40>(fd, 100)); + TimeT connect_until_time = static_cast(RFIFOL(fd, 140)); + TimeT ban_until_time = static_cast(RFIFOL(fd, 144)); + FString memo = RFIFO_STRING(fd, 150, RFIFOW(fd, 148)); + if (account_id == -1) + { + PRINTF("Unabled to find the account [%s]. Account doesn't exist.\n", + userid); + LADMIN_LOG("Unabled to find the account [%s]. Account doesn't exist.\n", + userid); + } + else if (!userid) + { + PRINTF("Unabled to find the account [id: %d]. Account doesn't exist.\n", + account_id); + LADMIN_LOG("Unabled to find the account [id: %d]. Account doesn't exist.\n", + account_id); + } + else + { + LADMIN_LOG("Receiving information about an account.\n"); + PRINTF("The account is set with:\n"); + if (!gm) + { + PRINTF(" Id: %d (non-GM)\n", account_id); + } + else + { + PRINTF(" Id: %d (GM level %d)\n", + account_id, gm); + } + PRINTF(" Name: '%s'\n", userid); + if (sex == 0) + PRINTF(" Sex: Female\n"); + else if (sex == 1) + PRINTF(" Sex: Male\n"); + else + PRINTF(" Sex: Server\n"); + PRINTF(" E-mail: %s\n", email); + switch (state) + { + case 0: + PRINTF(" Statut: 0 [Account OK]\n"); + break; + case 1: + PRINTF(" Statut: 1 [Unregistered ID]\n"); + break; + case 2: + PRINTF(" Statut: 2 [Incorrect Password]\n"); + break; + case 3: + PRINTF(" Statut: 3 [This ID is expired]\n"); + break; + case 4: + PRINTF(" Statut: 4 [Rejected from Server]\n"); + break; + case 5: + PRINTF(" Statut: 5 [You have been blocked by the GM Team]\n"); + break; + case 6: + PRINTF(" Statut: 6 [Your Game's EXE file is not the latest version]\n"); + break; + case 7: + PRINTF(" Statut: 7 [You are Prohibited to log in until %s]\n", + error_message); + break; + case 8: + PRINTF(" Statut: 8 [Server is jammed due to over populated]\n"); + break; + case 9: + PRINTF(" Statut: 9 [No MSG]\n"); + break; + default: // 100 + PRINTF(" Statut: %d [This ID is totally erased]\n", + state); + break; + } + if (!ban_until_time) + { + PRINTF(" Banishment: not banished.\n"); + } + else + { + timestamp_seconds_buffer tmpstr; + stamp_time(tmpstr, &ban_until_time); + PRINTF(" Banishment: until %s.\n", tmpstr); + } + if (connections > 1) + PRINTF(" Count: %d connections.\n", + connections); + else + PRINTF(" Count: %d connection.\n", + connections); + PRINTF(" Last connection at: %s (ip: %s)\n", + lastlogin, last_ip_); + if (!connect_until_time) + { + PRINTF(" Validity limit: unlimited.\n"); + } + else + { + timestamp_seconds_buffer tmpstr; + stamp_time(tmpstr, &connect_until_time); + PRINTF(" Validity limit: until %s.\n", + tmpstr); + } + PRINTF(" Memo: '%s'\n", memo); + } + } + bytes_to_read = 0; + RFIFOSKIP(fd, 150 + RFIFOW(fd, 148)); + break; + + default: + PRINTF("Remote administration has been disconnected (unknown packet).\n"); + LADMIN_LOG("'End of connection, unknown packet.\n"); + session[fd]->eof = 1; + return; + } + } + + // if we don't wait new packets, do the prompt + prompt(); +} + +//------------------------------------ +// Function to connect to login-server +//------------------------------------ +static +int Connect_login_server(void) +{ + Iprintf("Attempt to connect to login-server...\n"); + LADMIN_LOG("Attempt to connect to login-server...\n"); + + if ((login_fd = make_connection(login_ip, login_port)) < 0) + return 0; + + { + WFIFOW(login_fd, 0) = 0x7918; // Request for administation login + WFIFOW(login_fd, 2) = 0; // no encrypted + WFIFO_STRING(login_fd, 4, admin_pass, 24); + WFIFOSET(login_fd, 28); + bytes_to_read = 1; + + Iprintf("Sending of the password...\n"); + LADMIN_LOG("Sending of the password...\n"); + } + + return 0; +} + +//----------------------------------- +// Reading general configuration file +//----------------------------------- +static +int ladmin_config_read(ZString cfgName) +{ + std::ifstream in(cfgName.c_str()); + if (!in.is_open()) + { + PRINTF("\033[0mConfiguration file (%s) not found.\n", cfgName); + return 1; + } + + Iprintf("\033[0m---Start reading of Ladmin configuration file (%s)\n", + cfgName); + FString line; + while (io::getline(in, line)) + { + SString w1; + TString w2; + if (!split_key_value(line, &w1, &w2)) + continue; + + if (w1 == "login_ip") + { + struct hostent *h = gethostbyname(w2.c_str()); + if (h != NULL) + { + Iprintf("Login server IP address: %s -> %s\n", + w2, login_ip); + login_ip = IP4Address({ + static_cast(h->h_addr[0]), + static_cast(h->h_addr[1]), + static_cast(h->h_addr[2]), + static_cast(h->h_addr[3]), + }); + } + } + else if (w1 == "login_port") + { + login_port = atoi(w2.c_str()); + } + else if (w1 == "admin_pass") + { + admin_pass = stringish(w2); + } + else if (w1 == "ladmin_log_filename") + { + ladmin_log_filename = w2; + } + else if (w1 == "import") + { + ladmin_config_read(w2); + } + else + { + PRINTF("WARNING: unknown ladmin config key: %s\n", FString(w1)); + } + } + + Iprintf("---End reading of Ladmin configuration file.\n"); + + return 0; +} + +//-------------------------------------- +// Function called at exit of the server +//-------------------------------------- +void term_func(void) +{ + + if (already_exit_function == 0) + { + delete_session(login_fd); + + Iprintf("\033[0m----End of Ladmin (normal end with closing of all files).\n"); + LADMIN_LOG("----End of Ladmin (normal end with closing of all files).\n"); + + already_exit_function = 1; + } +} + +//------------------------ +// Main function of ladmin +//------------------------ +int do_init(int argc, ZString *argv) +{ + eathena_interactive_session = isatty(0); + // read ladmin configuration + ladmin_config_read((argc > 1) ? argv[1] : LADMIN_CONF_NAME); + + LADMIN_LOG(""); + LADMIN_LOG("Configuration file readed.\n"); + + set_defaultparse(parse_fromlogin); + + Iprintf("EAthena login-server administration tool.\n"); + Version version = CURRENT_LOGIN_SERVER_VERSION; + Iprintf("for tmwA version %hhu.%hhu.%hhu (dev? %hhu) (flags %hhx) (which %hhx) (vend %hu)\n", + version.major, version.minor, version.patch, + version.devel, + + version.flags, version.which, + version.vend); + + LADMIN_LOG("Ladmin is ready.\n"); + Iprintf("Ladmin is \033[1;32mready\033[0m.\n\n"); + + Connect_login_server(); + + return 0; +} -- cgit v1.2.3-60-g2f50