From 5b8d1b4f20a117e071e4ab57bd16be3215c20a06 Mon Sep 17 00:00:00 2001 From: "Zuzanna K. Filutowska" Date: Tue, 21 Feb 2006 22:15:05 +0000 Subject: Initial revision --- conf/lan_support.conf | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 conf/lan_support.conf (limited to 'conf/lan_support.conf') diff --git a/conf/lan_support.conf b/conf/lan_support.conf new file mode 100644 index 00000000..bfaec696 --- /dev/null +++ b/conf/lan_support.conf @@ -0,0 +1,41 @@ +// Athena TXT version LAN configure file. +// Support Client Connect to Local Area Network (LAN) IP Address Server. +// put this fle into conf/ directory +// +// HOWTO: +// To use this file, the login-server, char-server and map-server must be on the same subnetwork +// (not necessary on the same computer). You can not use eAthena if you want to install the servers on 2 or more different LAN. +// +// First of all: you must configure your router to forward your WAN IP (one or more) and port (default: 6900, 6121 and 5121) +// to the right concerned computer(s) (if default port, forward 6900 port to the (LAN IP) login-server, 6121 port to the (LAN IP) char-server, etc.). +// After, set in char_athena.conf and map_athena.conf files the WAN IP and the right ports that you use. +// Give to WAN people (client that are not on your LAN) your WAN IP to have an access to your server. +// At this point, all players outside your LAN can access to your server(s). +// +// Now, you must parameter your LAN for the servers. +// Set the LAN IP of the char-server and the map-server in this file (lan_char_ip and lan_map_ip). +// Set the definition of your LAN in this file (subnet and subnetmask). +// When you load/start login-server and char-server, read what the server displays, and specially the section ---LAN CONFIGURATION---. +// If you see a warning or something not good, correct it. +// Now LAN client can access to your server. +// +// NB: if you want that nobody of your LAN can access to your server, put 127.0.0.1 in IP and 255.255.255.255 for the mask. +// So only the localhost computer would access to your server. +// NB2: you can use LAN name if you have some instead of IP and/or mask. +// NB3: if you want set your server only for LAN people, set your LAN IP instead of the WAN IP, and set 127.0.0.1/255.255.255.255 for the LAN IP. +// +// HOW THAT WORKS: +// When someone tries to connect to your server(s), the login-server/char-server checks its IP with the LAN subnet (subnet and subnetmask parameters). +// If it matches, the login-server sends the LAN IP of the char-server (lan_char_ip); and char-server do same for map-server (lan_map_ip). +// If not, the login-server sends the WAN IP of the char-server that it have received (char_ip in char_athena.conf) +// and the char-server sends the WAN IP of the map-server that it have received (map_ip in map_athena.conf) + +// put here the LAN IP of your char-server +lan_char_ip: 127.0.0.1 + +// put here the LAN IP of your map-server +lan_map_ip: 127.0.0.1 + +// put here the Subnet mask of your LAN +subnet: 127.0.0.1 +subnetmask: 255.255.255.255 -- cgit v1.2.3-60-g2f50