// $Id: ladmin.c,v 1.1.1.1 2004/09/10 17:26:52 MagicalTux Exp $
///////////////////////////////////////////////////////////////////////////
// EAthena login-server remote administration tool
// Ladamin in C by [Yor]
// if you modify this software, modify ladmin in tool too.
///////////////////////////////////////////////////////////////////////////

#include <sys/types.h>
#include <sys/socket.h>
#include <stdio.h>
#include <stdlib.h>
#include <netinet/in.h>
#include <sys/time.h>           // gettimeofday
#include <time.h>
#include <sys/ioctl.h>
#include <unistd.h>             // close
#include <signal.h>
#include <fcntl.h>
#include <string.h>             // str*
#include <arpa/inet.h>          // inet_addr
#include <netdb.h>              // gethostbyname
#include <stdarg.h>             // valist
#include <ctype.h>              // tolower

#include "../common/core.h"
#include "../common/socket.h"
#include "ladmin.h"
#include "../common/version.h"
#include "../common/mmo.h"

#ifdef PASSWORDENC
#include "../common/md5calc.h"
#endif

#ifdef MEMWATCH
#include "memwatch.h"
#endif

extern int eathena_interactive_session; // from core.c
#define Iprintf if (eathena_interactive_session) printf

//-------------------------------INSTRUCTIONS------------------------------
// Set the variables below:
//   IP of the login server.
//   Port where the login-server listens incoming packets.
//   Password of administration (same of config_athena.conf).
//   Displayed language of the sofware (if not correct, english is used).
// IMPORTANT:
//   Be sure that you authorize remote administration in login-server
//   (see login_athena.conf, 'admin_state' parameter)
//-------------------------------------------------------------------------
char loginserverip[16] = "127.0.0.1";   // IP of login-server
int  loginserverport = 6900;    // Port of login-server
char loginserveradminpassword[24] = "admin";    // Administration password
#ifdef PASSWORDENC
int  passenc = 2;               // Encoding type of the password
#else
int  passenc = 0;               // Encoding type of the password
#endif
char defaultlanguage = 'E';     // Default language (F: Français/E: English)
                                             // (if it's not 'F', default is English)
char ladmin_log_filename[1024] = "log/ladmin.log";
char date_format[32] = "%Y-%m-%d %H:%M:%S";
//-------------------------------------------------------------------------
//  LIST of COMMANDs that you can type at the prompt:
//    To use these commands you can only type only the first letters.
//    You must type a minimum of letters (you can not type 'a',
//      because ladmin doesn't know if it's for 'aide' or for 'add')
//    <Example> q <= quit, li <= list, pass <= passwd, etc.
//
//  Note: every time you must give a account_name, you can use "" or '' (spaces can be included)
//
//  aide/help/?
//    Display the description of the commands
//  aide/help/? [command]
//    Display the description of the specified command
//
//  add <account_name> <sex> <password>
//    Create an account with the default email (a@a.com).
//    Concerning the sex, only the first letter is used (F or M).
//    The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.
//    When the password is omitted, the input is done without displaying of the pressed keys.
//    <example> add testname Male testpass
//
//  ban/banish yyyy/mm/dd hh:mm:ss <account name>
//    Changes the final date of a banishment of an account.
//    Like banset, but <account name> is at end.
//
//  banadd <account_name> <modifier>
//    Adds or substracts time from the final date of a banishment of an account.
//    Modifier is done as follows:
//      Adjustment value (-1, 1, +1, etc...)
//      Modified element:
//        a or y: year
//        m:  month
//        j or d: day
//        h:  hour
//        mn: minute
//        s:  second
//    <example> banadd testname +1m-2mn1s-6y
//              this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
//  NOTE: If you modify the final date of a non-banished account,
//        you fix the final date to (actual time +- adjustments)
//
//  banset <account_name> yyyy/mm/dd [hh:mm:ss]
//    Changes the final date of a banishment of an account.
//    Default time [hh:mm:ss]: 23:59:59.
//  banset <account_name> 0
//    Set a non-banished account (0 = unbanished).
//
//  block <account name>
//    Set state 5 (You have been blocked by the GM Team) to an account.
//    Like state <account name> 5.
//
//  check <account_name> <password>
//    Check the validity of a password for an account
//    NOTE: Server will never sends back a password.
//          It's the only method you have to know if a password is correct.
//          The other method is to have a ('physical') access to the accounts file.
//
//  create <account_name> <sex> <email> <password>
//    Like the 'add' command, but with e-mail moreover.
//    <example> create testname Male my@mail.com testpass
//
//  del <account name>
//    Remove an account.
//    This order requires confirmation. After confirmation, the account is deleted.
//
//  email <account_name> <email>
//    Modify the e-mail of an account.
//
//  getcount
//    Give the number of players online on all char-servers.
//
//  gm <account_name> [GM_level]
//    Modify the GM level of an account.
//    Default value remove GM level (GM level = 0).
//    <example> gm testname 80
//
//  id <account name>
//    Give the id of an account.
//
//  info <account_id>
//    Display complete information of an account.
//
//  kami <message>
//    Sends a broadcast message on all map-server (in yellow).
//  kamib <message>
//    Sends a broadcast message on all map-server (in blue).
//
//  language <language>
//    Change the language of displaying.
//
//  list/ls [start_id [end_id]]
//    Display a list of accounts.
//    'start_id', 'end_id': indicate end and start identifiers.
//    Research by name is not possible with this command.
//    <example> list 10 9999999
//
//  listBan/lsBan [start_id [end_id]]
//    Like list/ls, but only for accounts with state or banished
//
//  listGM/lsGM [start_id [end_id]]
//    Like list/ls, but only for GM accounts
//
//  listOK/lsOK [start_id [end_id]]
//    Like list/ls, but only for accounts without state and not banished
//
//  memo <account_name> <memo>
//    Modify the memo of an account.
//    'memo': it can have until 253 characters (with spaces or not).
//
//  name <account_id>
//    Give the name of an account.
//
//  passwd <account_name> <new_password>
//    Change the password of an account.
//    When new password is omitted, the input is done without displaying of the pressed keys.
//
//  quit/end/exit
//    End of the program of administration
//
//  reloadGM
//    Reload GM configuration file
//
//  search <expression>
//    Seek accounts.
//    Displays the accounts whose names correspond.
//  search -r/-e/--expr/--regex <expression>
//    Seek accounts by regular expression.
//    Displays the accounts whose names correspond.
//
//  sex <account_name> <sex>
//    Modify the sex of an account.
//    <example> sex testname Male
//
//  state <account_name> <new_state> <error_message_#7>
//    Change the state of an account.
//    'new_state': state is the state of the packet 0x006a + 1. The possibilities are:
//                 0 = Account ok            6 = Your Game's EXE file is not the latest version
//                 1 = Unregistered ID       7 = You are Prohibited to log in until %s
//                 2 = Incorrect Password    8 = Server is jammed due to over populated
//                 3 = This ID is expired    9 = No MSG
//                 4 = Rejected from Server  100 = This ID has been totally erased
//                 5 = You have been blocked by the GM Team
//                 all other values are 'No MSG', then use state 9 please.
//    'error_message_#7': message of the code error 6 = Your are Prohibited to log in until %s (packet 0x006a)
//
//  timeadd <account_name> <modifier>
//    Adds or substracts time from the validity limit of an account.
//    Modifier is done as follows:
//      Adjustment value (-1, 1, +1, etc...)
//      Modified element:
//        a or y: year
//        m:  month
//        j or d: day
//        h:  hour
//        mn: minute
//        s:  second
//    <example> timeadd testname +1m-2mn1s-6y
//              this example adds 1 month and 1 second, and substracts 2 minutes and 6 years at the same time.
//  NOTE: You can not modify a unlimited validity limit.
//        If you want modify it, you want probably create a limited validity limit.
//        So, at first, you must set the validity limit to a date/time.
//
//  timeset <account_name> yyyy/mm/dd [hh:mm:ss]
//    Changes the validity limit of an account.
//    Default time [hh:mm:ss]: 23:59:59.
//  timeset <account_name> 0
//    Gives an unlimited validity limit (0 = unlimited).
//
//  unban/unbanish <account name>
//    Unban an account.
//    Like banset <account name> 0.
//
//  unblock <account name>
//    Set state 0 (Account ok) to an account.
//    Like state <account name> 0.
//
//  version
//    Display the version of the login-server.
//
//  who <account name>
//    Displays complete information of an account.
//
//-------------------------------------------------------------------------
int  login_fd;
int  login_ip;
int  bytes_to_read = 0;         // flag to know if we waiting bytes from login-server
char command[1024];
char parameters[1024];
int  list_first, list_last, list_type, list_count;  // parameter to display a list of accounts
int  already_exit_function = 0; // sometimes, the exit function is called twice... so, don't log twice the message

//------------------------------
// Writing function of logs file
//------------------------------
int ladmin_log (char *fmt, ...)
{
    FILE *logfp;
    va_list ap;
    struct timeval tv;
    char tmpstr[2048];

    va_start (ap, fmt);

    logfp = fopen_ (ladmin_log_filename, "a");
    if (logfp)
    {
        if (fmt[0] == '\0')     // jump a line if no message
            fprintf (logfp, RETCODE);
        else
        {
            gettimeofday (&tv, NULL);
            strftime (tmpstr, 24, date_format, localtime (&(tv.tv_sec)));
            sprintf (tmpstr + strlen (tmpstr), ".%03d: %s",
                     (int) tv.tv_usec / 1000, fmt);
            vfprintf (logfp, tmpstr, ap);
        }
        fclose_ (logfp);
    }

    va_end (ap);
    return 0;
}

//-----------------------------------------------------
// Function to suppress control characters in a string.
//-----------------------------------------------------
int remove_control_chars (unsigned char *str)
{
    int  i;
    int  change = 0;

    for (i = 0; str[i]; i++)
    {
        if (str[i] < 32)
        {
            str[i] = '_';
            change = 1;
        }
    }

    return change;
}

//---------------------------------------------
// Function to return ordonal text of a number.
//---------------------------------------------
char *makeordinal (int number)
{
    if (defaultlanguage == 'F')
    {
        if (number == 0)
            return "";
        else if (number == 1)
            return "er";
        else
            return "ème";
    }
    else
    {
        if ((number % 10) < 4 && (number % 10) != 0
            && (number < 10 || number > 20))
        {
            if ((number % 10) == 1)
                return "st";
            else if ((number % 10) == 2)
                return "nd";
            else
                return "rd";
        }
        else
        {
            return "th";
        }
    }
    return "";
}

//-----------------------------------------------------------------------------------------
// Function to test of the validity of an account name (return 0 if incorrect, and 1 if ok)
//-----------------------------------------------------------------------------------------
int verify_accountname (char *account_name)
{
    int  i;

    for (i = 0; account_name[i]; i++)
    {
        if (account_name[i] < 32)
        {
            if (defaultlanguage == 'F')
            {
                printf
                    ("Caractère interdit trouvé dans le nom du compte (%d%s caractère).\n",
                     i + 1, makeordinal (i + 1));
                ladmin_log
                    ("Caractère interdit trouvé dans le nom du compte (%d%s caractère)."
                     RETCODE, i + 1, makeordinal (i + 1));
            }
            else
            {
                printf
                    ("Illegal character found in the account name (%d%s character).\n",
                     i + 1, makeordinal (i + 1));
                ladmin_log
                    ("Illegal character found in the account name (%d%s character)."
                     RETCODE, i + 1, makeordinal (i + 1));
            }
            return 0;
        }
    }

    if (strlen (account_name) < 4)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n");
            ladmin_log
                ("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères."
                 RETCODE);
        }
        else
        {
            printf
                ("Account name is too short. Please input an account name of 4-23 bytes.\n");
            ladmin_log
                ("Account name is too short. Please input an account name of 4-23 bytes."
                 RETCODE);
        }
        return 0;
    }

    if (strlen (account_name) > 23)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Nom du compte trop long. Entrez un nom de compte de 4-23 caractères.\n");
            ladmin_log
                ("Nom du compte trop long. Entrez un nom de compte de 4-23 caractères."
                 RETCODE);
        }
        else
        {
            printf
                ("Account name is too long. Please input an account name of 4-23 bytes.\n");
            ladmin_log
                ("Account name is too long. Please input an account name of 4-23 bytes."
                 RETCODE);
        }
        return 0;
    }

    return 1;
}

//---------------------------------------------------
// E-mail check: return 0 (not correct) or 1 (valid).
//---------------------------------------------------
int e_mail_check (unsigned char *email)
{
    char ch;
    unsigned char *last_arobas;

    // athena limits
    if (strlen (email) < 3 || strlen (email) > 39)
        return 0;

    // part of RFC limits (official reference of e-mail description)
    if (strchr (email, '@') == NULL || email[strlen (email) - 1] == '@')
        return 0;

    if (email[strlen (email) - 1] == '.')
        return 0;

    last_arobas = strrchr (email, '@');

    if (strstr (last_arobas, "@.") != NULL ||
        strstr (last_arobas, "..") != NULL)
        return 0;

    for (ch = 1; ch < 32; ch++)
    {
        if (strchr (last_arobas, ch) != NULL)
        {
            return 0;
            break;
        }
    }

    if (strchr (last_arobas, ' ') != NULL ||
        strchr (last_arobas, ';') != NULL)
        return 0;

    // all correct
    return 1;
}

//----------------------------------
// Sub-function: Input of a password
//----------------------------------
int typepasswd (char *password)
{
    char password1[1023], password2[1023];
    int  letter;
    int  i;

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Aucun mot de passe n'a été donné. Demande d'un mot de passe."
             RETCODE);
    }
    else
    {
        ladmin_log ("No password was given. Request to obtain a password."
                    RETCODE);
    }

    memset (password1, '\0', sizeof (password1));
    memset (password2, '\0', sizeof (password2));
    if (defaultlanguage == 'F')
        printf ("\033[1;36m Entrez le mot de passe > \033[0;32;42m");
    else
        printf ("\033[1;36m Type the password > \033[0;32;42m");
    i = 0;
    while ((letter = getchar ()) != '\n')
        password1[i++] = letter;
    if (defaultlanguage == 'F')
        printf
            ("\033[0m\033[1;36m Ré-entrez le mot de passe > \033[0;32;42m");
    else
        printf ("\033[0m\033[1;36m Verify the password > \033[0;32;42m");
    i = 0;
    while ((letter = getchar ()) != '\n')
        password2[i++] = letter;

    printf ("\033[0m");
    fflush (stdout);
    fflush (stdin);

    if (strcmp (password1, password2) != 0)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Erreur de vérification du mot de passe: Saisissez le même mot de passe svp.\n");
            ladmin_log
                ("Erreur de vérification du mot de passe: Saisissez le même mot de passe svp."
                 RETCODE);
            ladmin_log ("  Premier mot de passe: %s, second mot de passe: %s."
                        RETCODE, password1, password2);
        }
        else
        {
            printf
                ("Password verification failed. Please input same password.\n");
            ladmin_log
                ("Password verification failed. Please input same password."
                 RETCODE);
            ladmin_log ("  First password: %s, second password: %s." RETCODE,
                        password1, password2);
        }
        return 0;
    }
    if (defaultlanguage == 'F')
    {
        ladmin_log ("Mot de passe saisi: %s." RETCODE, password1);
    }
    else
    {
        ladmin_log ("Typed password: %s." RETCODE, password1);
    }
    strcpy (password, password1);
    return 1;
}

//------------------------------------------------------------------------------------
// Sub-function: Test of the validity of password (return 0 if incorrect, and 1 if ok)
//------------------------------------------------------------------------------------
int verify_password (char *password)
{
    int  i;

    for (i = 0; password[i]; i++)
    {
        if (password[i] < 32)
        {
            if (defaultlanguage == 'F')
            {
                printf
                    ("Caractère interdit trouvé dans le mot de passe (%d%s caractère).\n",
                     i + 1, makeordinal (i + 1));
                ladmin_log
                    ("Caractère interdit trouvé dans le nom du compte (%d%s caractère)."
                     RETCODE, i + 1, makeordinal (i + 1));
            }
            else
            {
                printf
                    ("Illegal character found in the password (%d%s character).\n",
                     i + 1, makeordinal (i + 1));
                ladmin_log
                    ("Illegal character found in the password (%d%s character)."
                     RETCODE, i + 1, makeordinal (i + 1));
            }
            return 0;
        }
    }

    if (strlen (password) < 4)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères.\n");
            ladmin_log
                ("Nom du compte trop court. Entrez un nom de compte de 4-23 caractères."
                 RETCODE);
        }
        else
        {
            printf
                ("Account name is too short. Please input an account name of 4-23 bytes.\n");
            ladmin_log
                ("Account name is too short. Please input an account name of 4-23 bytes."
                 RETCODE);
        }
        return 0;
    }

    if (strlen (password) > 23)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Mot de passe trop long. Entrez un mot de passe de 4-23 caractères.\n");
            ladmin_log
                ("Mot de passe trop long. Entrez un mot de passe de 4-23 caractères."
                 RETCODE);
        }
        else
        {
            printf
                ("Password is too long. Please input a password of 4-23 bytes.\n");
            ladmin_log
                ("Password is too long. Please input a password of 4-23 bytes."
                 RETCODE);
        }
        return 0;
    }

    return 1;
}

//------------------------------------------------------------------
// Sub-function: Check the name of a command (return complete name)
//-----------------------------------------------------------------
int check_command (char *command)
{
// help
    if (strncmp (command, "aide", 2) == 0 && strncmp (command, "aide", strlen (command)) == 0)  // not 1 letter command: 'aide' or 'add'?
        strcpy (command, "aide");
    else if (strncmp (command, "help", 1) == 0
             && strncmp (command, "help", strlen (command)) == 0)
        strcpy (command, "help");
// general commands
    else if (strncmp (command, "add", 2) == 0 && strncmp (command, "add", strlen (command)) == 0)   // not 1 letter command: 'aide' or 'add'?
        strcpy (command, "add");
    else if ((strncmp (command, "ban", 3) == 0
              && strncmp (command, "ban", strlen (command)) == 0)
             || (strncmp (command, "banish", 4) == 0
                 && strncmp (command, "banish", strlen (command)) == 0))
        strcpy (command, "ban");
    else if ((strncmp (command, "banadd", 4) == 0 && strncmp (command, "banadd", strlen (command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ?
             strcmp (command, "ba") == 0)
        strcpy (command, "banadd");
    else if ((strncmp (command, "banset", 4) == 0 && strncmp (command, "banset", strlen (command)) == 0) || // not 1 letter command: 'ba' or 'bs'? 'banadd' or 'banset' ?
             strcmp (command, "bs") == 0)
        strcpy (command, "banset");
    else if (strncmp (command, "block", 2) == 0
             && strncmp (command, "block", strlen (command)) == 0)
        strcpy (command, "block");
    else if (strncmp (command, "check", 2) == 0 && strncmp (command, "check", strlen (command)) == 0)   // not 1 letter command: 'check' or 'create'?
        strcpy (command, "check");
    else if (strncmp (command, "create", 2) == 0 && strncmp (command, "create", strlen (command)) == 0) // not 1 letter command: 'check' or 'create'?
        strcpy (command, "create");
    else if (strncmp (command, "delete", 1) == 0
             && strncmp (command, "delete", strlen (command)) == 0)
        strcpy (command, "delete");
    else if ((strncmp (command, "email", 2) == 0 && strncmp (command, "email", strlen (command)) == 0) ||   // not 1 letter command: 'email', 'end' or 'exit'?
             (strncmp (command, "e-mail", 2) == 0
              && strncmp (command, "e-mail", strlen (command)) == 0))
        strcpy (command, "email");
    else if (strncmp (command, "getcount", 2) == 0 && strncmp (command, "getcount", strlen (command)) == 0) // not 1 letter command: 'getcount' or 'gm'?
        strcpy (command, "getcount");
//  else if (strncmp(command, "gm", 2) == 0 && strncmp(command, "gm", strlen(command)) == 0) // not 1 letter command: 'getcount' or 'gm'?
//      strcpy(command, "gm");
//  else if (strncmp(command, "id", 2) == 0 && strncmp(command, "id", strlen(command)) == 0) // not 1 letter command: 'id' or 'info'?
//      strcpy(command, "id");
    else if (strncmp (command, "info", 2) == 0 && strncmp (command, "info", strlen (command)) == 0) // not 1 letter command: 'id' or 'info'?
        strcpy (command, "info");
//  else if (strncmp(command, "kami", 4) == 0 && strncmp(command, "kami", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'?
//      strcpy(command, "kami");
//  else if (strncmp(command, "kamib", 5) == 0 && strncmp(command, "kamib", strlen(command)) == 0) // only all letters command: 'kami' or 'kamib'?
//      strcpy(command, "kamib");
    else if ((strncmp (command, "language", 2) == 0 && strncmp (command, "language", strlen (command)) == 0))   // not 1 letter command: 'language' or 'list'?
        strcpy (command, "language");
    else if ((strncmp (command, "list", 2) == 0 && strncmp (command, "list", strlen (command)) == 0) || // 'list' is default list command // not 1 letter command: 'language' or 'list'?
             strcmp (command, "ls") == 0)
        strcpy (command, "list");
    else if (strncmp (command, "itemfrob", 6) == 0)
        strcpy (command, "itemfrob");
    else if ((strncmp (command, "listban", 5) == 0
              && strncmp (command, "listban", strlen (command)) == 0)
             || (strncmp (command, "lsban", 3) == 0
                 && strncmp (command, "lsban", strlen (command)) == 0)
             || strcmp (command, "lb") == 0)
        strcpy (command, "listban");
    else if ((strncmp (command, "listgm", 5) == 0
              && strncmp (command, "listgm", strlen (command)) == 0)
             || (strncmp (command, "lsgm", 3) == 0
                 && strncmp (command, "lsgm", strlen (command)) == 0)
             || strcmp (command, "lg") == 0)
        strcpy (command, "listgm");
    else if ((strncmp (command, "listok", 5) == 0
              && strncmp (command, "listok", strlen (command)) == 0)
             || (strncmp (command, "lsok", 3) == 0
                 && strncmp (command, "lsok", strlen (command)) == 0)
             || strcmp (command, "lo") == 0)
        strcpy (command, "listok");
    else if (strncmp (command, "memo", 1) == 0
             && strncmp (command, "memo", strlen (command)) == 0)
        strcpy (command, "memo");
    else if (strncmp (command, "name", 1) == 0
             && strncmp (command, "name", strlen (command)) == 0)
        strcpy (command, "name");
    else if ((strncmp (command, "password", 1) == 0
              && strncmp (command, "password", strlen (command)) == 0)
             || strcmp (command, "passwd") == 0)
        strcpy (command, "password");
    else if (strncmp (command, "reloadgm", 1) == 0
             && strncmp (command, "reloadgm", strlen (command)) == 0)
        strcpy (command, "reloadgm");
    else if (strncmp (command, "search", 3) == 0 && strncmp (command, "search", strlen (command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'?
        strcpy (command, "search"); // not 2 letters command: 'search' or 'sex'?
//  else if (strncmp(command, "sex", 3) == 0 && strncmp(command, "sex", strlen(command)) == 0) // not 1 letter command: 'search', 'state' or 'sex'?
//      strcpy(command, "sex"); // not 2 letters command: 'search' or 'sex'?
    else if (strncmp (command, "state", 2) == 0 && strncmp (command, "state", strlen (command)) == 0)   // not 1 letter command: 'search', 'state' or 'sex'?
        strcpy (command, "state");
    else if ((strncmp (command, "timeadd", 5) == 0 && strncmp (command, "timeadd", strlen (command)) == 0) ||   // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'?
             strcmp (command, "ta") == 0)
        strcpy (command, "timeadd");
    else if ((strncmp (command, "timeset", 5) == 0 && strncmp (command, "timeset", strlen (command)) == 0) ||   // not 1 letter command: 'ta' or 'ts'? 'timeadd' or 'timeset'?
             strcmp (command, "ts") == 0)
        strcpy (command, "timeset");
    else if ((strncmp (command, "unban", 5) == 0
              && strncmp (command, "unban", strlen (command)) == 0)
             || (strncmp (command, "unbanish", 4) == 0
                 && strncmp (command, "unbanish", strlen (command)) == 0))
        strcpy (command, "unban");
    else if (strncmp (command, "unblock", 4) == 0
             && strncmp (command, "unblock", strlen (command)) == 0)
        strcpy (command, "unblock");
    else if (strncmp (command, "version", 1) == 0
             && strncmp (command, "version", strlen (command)) == 0)
        strcpy (command, "version");
    else if (strncmp (command, "who", 1) == 0
             && strncmp (command, "who", strlen (command)) == 0)
        strcpy (command, "who");
// quit
    else if (strncmp (command, "quit", 1) == 0
             && strncmp (command, "quit", strlen (command)) == 0)
        strcpy (command, "quit");
    else if (strncmp (command, "exit", 2) == 0 && strncmp (command, "exit", strlen (command)) == 0) // not 1 letter command: 'email', 'end' or 'exit'?
        strcpy (command, "exit");
    else if (strncmp (command, "end", 2) == 0 && strncmp (command, "end", strlen (command)) == 0)   // not 1 letter command: 'email', 'end' or 'exit'?
        strcpy (command, "end");

    return 0;
}

//-----------------------------------------
// Sub-function: Display commands of ladmin
//-----------------------------------------
void display_help (char *param, int language)
{
    char command[1023];
    int  i;

    memset (command, '\0', sizeof (command));

    if (sscanf (param, "%s ", command) < 1 || strlen (command) == 0)
        strcpy (command, "");   // any value that is not a command

    if (command[0] == '?')
    {
        if (defaultlanguage == 'F')
            strcpy (command, "aide");
        else
            strcpy (command, "help");
    }

    // lowercase for command
    for (i = 0; command[i]; i++)
        command[i] = tolower (command[i]);

    // Analyse of the command
    check_command (command);    // give complete name to the command

    if (defaultlanguage == 'F')
    {
        ladmin_log ("Affichage des commandes ou d'une commande." RETCODE);
    }
    else
    {
        ladmin_log ("Displaying of the commands or a command." RETCODE);
    }

    if (language == 1)
    {
        if (strcmp (command, "aide") == 0)
        {
            printf ("aide/help/?\n");
            printf ("  Affiche la description des commandes\n");
            printf ("aide/help/? [commande]\n");
            printf ("  Affiche la description de la commande specifiée\n");
        }
        else if (strcmp (command, "help") == 0)
        {
            printf ("aide/help/?\n");
            printf ("  Display the description of the commands\n");
            printf ("aide/help/? [command]\n");
            printf ("  Display the description of the specified command\n");
// general commands
        }
        else if (strcmp (command, "add") == 0)
        {
            printf ("add <nomcompte> <sexe> <motdepasse>\n");
            printf ("  Crée un compte avec l'email par défaut (a@a.com).\n");
            printf
                ("  Concernant le sexe, seule la première lettre compte (F ou M).\n");
            printf
                ("  L'e-mail est a@a.com (e-mail par défaut). C'est comme n'avoir aucun e-mail.\n");
            printf
                ("  Lorsque motdepasse est omis, la saisie se fait sans que la frappe se voit.\n");
            printf ("  <exemple> add testname Male testpass\n");
        }
        else if (strcmp (command, "ban") == 0)
        {
            printf ("ban/banish aaaa/mm/jj hh:mm:ss <nom compte>\n");
            printf ("  Change la date de fin de bannissement d'un compte.\n");
            printf ("  Comme banset, mais <nom compte> est à la fin.\n");
        }
        else if (strcmp (command, "banadd") == 0)
        {
            printf ("banadd <nomcompte> <Modificateur>\n");
            printf
                ("  Ajoute ou soustrait du temps à la date de banissement d'un compte.\n");
            printf ("  Les modificateurs sont construits comme suit:\n");
            printf ("    Valeur d'ajustement (-1, 1, +1, etc...)\n");
            printf ("    Elément modifié:\n");
            printf ("      a ou y: année\n");
            printf ("      m:      mois\n");
            printf ("      j ou d: jour\n");
            printf ("      h:      heure\n");
            printf ("      mn:     minute\n");
            printf ("      s:      seconde\n");
            printf ("  <exemple> banadd testname +1m-2mn1s-6a\n");
            printf
                ("            Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n");
            printf ("            et 6 ans dans le même temps.\n");
            printf
                ("NOTE: Si vous modifez la date de banissement d'un compte non bani,\n");
            printf
                ("      vous indiquez comme date (le moment actuel +- les ajustements)\n");
        }
        else if (strcmp (command, "banset") == 0)
        {
            printf ("banset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n");
            printf ("  Change la date de fin de bannissement d'un compte.\n");
            printf ("  Heure par défaut [hh:mm:ss]: 23:59:59.\n");
            printf ("banset <nomcompte> 0\n");
            printf ("  Débanni un compte (0 = de-banni).\n");
        }
        else if (strcmp (command, "block") == 0)
        {
            printf ("block <nom compte>\n");
            printf
                ("  Place le status d'un compte à 5 (You have been blocked by the GM Team).\n");
            printf
                ("  La commande est l'équivalent de state <nom_compte> 5.\n");
        }
        else if (strcmp (command, "check") == 0)
        {
            printf ("check <nomcompte> <motdepasse>\n");
            printf
                ("  Vérifie la validité d'un mot de passe pour un compte\n");
            printf ("  NOTE: Le serveur n'enverra jamais un mot de passe.\n");
            printf
                ("        C'est la seule méthode que vous possédez pour savoir\n");
            printf
                ("        si un mot de passe est le bon. L'autre méthode est\n");
            printf
                ("        d'avoir un accès ('physique') au fichier des comptes.\n");
        }
        else if (strcmp (command, "create") == 0)
        {
            printf ("create <nomcompte> <sexe> <email> <motdepasse>\n");
            printf ("  Comme la commande add, mais avec l'e-mail en plus.\n");
            printf
                ("  <exemple> create testname Male mon@mail.com testpass\n");
        }
        else if (strcmp (command, "delete") == 0)
        {
            printf ("del <nom compte>\n");
            printf ("  Supprime un compte.\n");
            printf
                ("  La commande demande confirmation. Après confirmation, le compte est détruit.\n");
        }
        else if (strcmp (command, "email") == 0)
        {
            printf ("email <nomcompte> <email>\n");
            printf ("  Modifie l'e-mail d'un compte.\n");
        }
        else if (strcmp (command, "getcount") == 0)
        {
            printf ("getcount\n");
            printf
                ("  Donne le nombre de joueurs en ligne par serveur de char.\n");
        }
        else if (strcmp (command, "gm") == 0)
        {
            printf ("gm <nomcompte> [Niveau_GM]\n");
            printf ("  Modifie le niveau de GM d'un compte.\n");
            printf
                ("  Valeur par défaut: 0 (suppression du niveau de GM).\n");
            printf ("  <exemple> gm nomtest 80\n");
        }
        else if (strcmp (command, "id") == 0)
        {
            printf ("id <nom compte>\n");
            printf ("  Donne l'id d'un compte.\n");
        }
        else if (strcmp (command, "info") == 0)
        {
            printf ("info <idcompte>\n");
            printf ("  Affiche les informations sur un compte.\n");
        }
        else if (strcmp (command, "kami") == 0)
        {
            printf ("kami <message>\n");
            printf
                ("  Envoi un message général sur tous les serveurs de map (en jaune).\n");
        }
        else if (strcmp (command, "kamib") == 0)
        {
            printf ("kamib <message>\n");
            printf
                ("  Envoi un message général sur tous les serveurs de map (en bleu).\n");
        }
        else if (strcmp (command, "language") == 0)
        {
            printf ("language <langue>\n");
            printf ("  Change la langue d'affichage.\n");
            printf ("  Langues possibles: 'Français' ou 'English'.\n");
        }
        else if (strcmp (command, "list") == 0)
        {
            printf ("list/ls [Premier_id [Dernier_id]]\n");
            printf ("  Affiche une liste de comptes.\n");
            printf
                ("  'Premier_id', 'Dernier_id': indique les identifiants de départ et de fin.\n");
            printf
                ("  La recherche par nom n'est pas possible avec cette commande.\n");
            printf ("  <example> list 10 9999999\n");
        }
        else if (strcmp (command, "itemfrob") == 0)
        {
            printf ("Not localised yet.\n");
        }
        else if (strcmp (command, "listban") == 0)
        {
            printf ("listBan/lsBan [Premier_id [Dernier_id]]\n");
            printf
                ("  Comme list/ls, mais seulement pour les comptes avec statut ou bannis.\n");
        }
        else if (strcmp (command, "listgm") == 0)
        {
            printf ("listGM/lsGM [Premier_id [Dernier_id]]\n");
            printf ("  Comme list/ls, mais seulement pour les comptes GM.\n");
        }
        else if (strcmp (command, "listok") == 0)
        {
            printf ("listOK/lsOK [Premier_id [Dernier_id]]\n");
            printf
                ("  Comme list/ls, mais seulement pour les comptes sans statut et non bannis.\n");
        }
        else if (strcmp (command, "memo") == 0)
        {
            printf ("memo <nomcompte> <memo>\n");
            printf ("  Modifie le mémo d'un compte.\n");
            printf
                ("  'memo': Il peut avoir jusqu'à 253 caractères (avec des espaces ou non).\n");
        }
        else if (strcmp (command, "name") == 0)
        {
            printf ("name <idcompte>\n");
            printf ("  Donne le nom d'un compte.\n");
        }
        else if (strcmp (command, "password") == 0)
        {
            printf ("passwd <nomcompte> <nouveaumotdepasse>\n");
            printf ("  Change le mot de passe d'un compte.\n");
            printf ("  Lorsque nouveaumotdepasse est omis,\n");
            printf ("  la saisie se fait sans que la frappe ne se voit.\n");
        }
        else if (strcmp (command, "reloadgm") == 0)
        {
            printf ("reloadGM\n");
            printf ("  Reload GM configuration file\n");
        }
        else if (strcmp (command, "search") == 0)
        {
            printf ("search <expression>\n");
            printf ("  Cherche des comptes.\n");
            printf ("  Affiche les comptes dont les noms correspondent.\n");
//          printf("search -r/-e/--expr/--regex <expression>\n");
//          printf("  Cherche des comptes par expression regulière.\n");
//          printf("  Affiche les comptes dont les noms correspondent.\n");
        }
        else if (strcmp (command, "sex") == 0)
        {
            printf ("sex <nomcompte> <sexe>\n");
            printf ("  Modifie le sexe d'un compte.\n");
            printf ("  <exemple> sex testname Male\n");
        }
        else if (strcmp (command, "state") == 0)
        {
            printf ("state <nomcompte> <nouveaustatut> <message_erreur_7>\n");
            printf ("  Change le statut d'un compte.\n");
            printf
                ("  'nouveaustatut': Le statut est le même que celui du packet 0x006a + 1.\n");
            printf ("               les possibilités sont:\n");
            printf ("               0 = Compte ok\n");
            printf ("               1 = Unregistered ID\n");
            printf ("               2 = Incorrect Password\n");
            printf ("               3 = This ID is expired\n");
            printf ("               4 = Rejected from Server\n");
            printf
                ("               5 = You have been blocked by the GM Team\n");
            printf
                ("               6 = Your Game's EXE file is not the latest version\n");
            printf
                ("               7 = You are Prohibited to log in until...\n");
            printf
                ("               8 = Server is jammed due to over populated\n");
            printf ("               9 = No MSG\n");
            printf ("               100 = This ID has been totally erased\n");
            printf
                ("               all other values are 'No MSG', then use state 9 please.\n");
            printf ("  'message_erreur_7': message du code erreur 6 =\n");
            printf
                ("                      = Your are Prohibited to log in until... (packet 0x006a)\n");
        }
        else if (strcmp (command, "timeadd") == 0)
        {
            printf ("timeadd <nomcompte> <modificateur>\n");
            printf
                ("  Ajoute/soustrait du temps à la limite de validité d'un compte.\n");
            printf ("  Le modificateur est composé comme suit:\n");
            printf ("    Valeur modificatrice (-1, 1, +1, etc...)\n");
            printf ("    Elément modifié:\n");
            printf ("      a ou y: année\n");
            printf ("      m:      mois\n");
            printf ("      j ou d: jour\n");
            printf ("      h:      heure\n");
            printf ("      mn:     minute\n");
            printf ("      s:      seconde\n");
            printf ("  <exemple> timeadd testname +1m-2mn1s-6a\n");
            printf
                ("            Cette exemple ajoute 1 mois et une seconde, et soustrait 2 minutes\n");
            printf ("            et 6 ans dans le même temps.\n");
            printf
                ("NOTE: Vous ne pouvez pas modifier une limite de validité illimitée. Si vous\n");
            printf
                ("      désirez le faire, c'est que vous voulez probablement créer un limite de\n");
            printf
                ("      validité limitée. Donc, en premier, fixé une limite de valitidé.\n");
        }
        else if (strcmp (command, "timeadd") == 0)
        {
            printf ("timeset <nomcompte> aaaa/mm/jj [hh:mm:ss]\n");
            printf ("  Change la limite de validité d'un compte.\n");
            printf ("  Heure par défaut [hh:mm:ss]: 23:59:59.\n");
            printf ("timeset <nomcompte> 0\n");
            printf
                ("  Donne une limite de validité illimitée (0 = illimitée).\n");
        }
        else if (strcmp (command, "unban") == 0)
        {
            printf ("unban/unbanish <nom compte>\n");
            printf ("  Ote le banissement d'un compte.\n");
            printf
                ("  La commande est l'équivalent de banset <nom_compte> 0.\n");
        }
        else if (strcmp (command, "unblock") == 0)
        {
            printf ("unblock <nom compte>\n");
            printf ("  Place le status d'un compte à 0 (Compte ok).\n");
            printf
                ("  La commande est l'équivalent de state <nom_compte> 0.\n");
        }
        else if (strcmp (command, "version") == 0)
        {
            printf ("version\n");
            printf ("  Affiche la version du login-serveur.\n");
        }
        else if (strcmp (command, "who") == 0)
        {
            printf ("who <nom compte>\n");
            printf ("  Affiche les informations sur un compte.\n");
// quit
        }
        else if (strcmp (command, "quit") == 0 ||
                 strcmp (command, "exit") == 0 ||
                 strcmp (command, "end") == 0)
        {
            printf ("quit/end/exit\n");
            printf ("  Fin du programme d'administration.\n");
// unknown command
        }
        else
        {
            if (strlen (command) > 0)
                printf
                    ("Commande inconnue [%s] pour l'aide. Affichage de toutes les commandes.\n",
                     command);
            printf
                (" aide/help/?                             -- Affiche cet aide\n");
            printf
                (" aide/help/? [commande]                  -- Affiche l'aide de la commande\n");
            printf
                (" add <nomcompte> <sexe> <motdepasse>     -- Crée un compte (sans email)\n");
            printf
                (" ban/banish aaaa/mm/jj hh:mm:ss <nom compte> -- Fixe la date finale de banismnt\n");
            printf
                (" banadd/ba <nomcompte> <modificateur>    -- Ajout/soustrait du temps à la\n");
            printf
                ("   exemple: ba moncompte +1m-2mn1s-2y       date finale de banissement\n");
            printf
                (" banset/bs <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la date fin de banisemnt\n");
            printf
                (" banset/bs <nomcompte> 0                 -- Dé-banis un compte.\n");
            printf
                (" block <nom compte>  -- Mets le status d'un compte à 5 (blocked by the GM Team)\n");
            printf
                (" check <nomcompte> <motdepasse>          -- Vérifie un mot de passe d'un compte\n");
            printf
                (" create <nomcompte> <sexe> <email> <motdepasse> -- Crée un compte (avec email)\n");
            printf
                (" del <nom compte>                        -- Supprime un compte\n");
            printf
                (" email <nomcompte> <email>               -- Modifie l'e-mail d'un compte\n");
            printf
                (" getcount                                -- Donne le nb de joueurs en ligne\n");
            printf
                ("  gm <nomcompte> [Niveau_GM]              -- Modifie le niveau de GM d'un compte\n");
            printf
                (" id <nom compte>                         -- Donne l'id d'un compte\n");
            printf
                (" info <idcompte>                         -- Affiche les infos sur un compte\n");
            printf
                (" kami <message>                          -- Envoi un message général (en jaune)\n");
            printf
                (" kamib <message>                         -- Envoi un message général (en bleu)\n");
            printf
                (" language <langue>                       -- Change la langue d'affichage.\n");
            printf
                (" list/ls [Premier_id [Dernier_id] ]      -- Affiche une liste de comptes\n");
            printf
                (" listBan/lsBan [Premier_id [Dernier_id] ] -- Affiche une liste de comptes\n");
            printf
                ("                                             avec un statut ou bannis\n");
            printf
                (" listGM/lsGM [Premier_id [Dernier_id] ]  -- Affiche une liste de comptes GM\n");
            printf
                (" listOK/lsOK [Premier_id [Dernier_id] ]  -- Affiche une liste de comptes\n");
            printf
                ("                                            sans status et non bannis\n");
            printf
                (" memo <nomcompte> <memo>                 -- Modifie le memo d'un compte\n");
            printf
                (" name <idcompte>                         -- Donne le nom d'un compte\n");
            printf
                (" passwd <nomcompte> <nouveaumotdepasse>  -- Change le mot de passe d'un compte\n");
            printf
                (" quit/end/exit                           -- Fin du programme d'administation\n");
            printf
                (" reloadGM                              -- Recharger le fichier de config des GM\n");
            printf
                (" search <expression>                     -- Cherche des comptes\n");
//          printf(" search -e/-r/--expr/--regex <expression> -- Cherche des comptes par REGEX\n");
            printf
                (" sex <nomcompte> <sexe>                  -- Modifie le sexe d'un compte\n");
            printf
                (" state <nomcompte> <nouveaustatut> <messageerr7> -- Change le statut d'1 compte\n");
            printf
                (" timeadd/ta <nomcompte> <modificateur>   -- Ajout/soustrait du temps à la\n");
            printf
                ("   exemple: ta moncompte +1m-2mn1s-2y       limite de validité\n");
            printf
                (" timeset/ts <nomcompte> aaaa/mm/jj [hh:mm:ss] -- Change la limite de validité\n");
            printf
                (" timeset/ts <nomcompte> 0                -- limite de validité = illimitée\n");
            printf
                (" unban/unbanish <nom compte>             -- Ote le banissement d'un compte\n");
            printf
                (" unblock <nom compte>             -- Mets le status d'un compte à 0 (Compte ok)\n");
            printf
                (" version                                 -- Donne la version du login-serveur\n");
            printf
                (" who <nom compte>                        -- Affiche les infos sur un compte\n");
            printf
                (" Note: Pour les noms de compte avec des espaces, tapez \"<nom compte>\" (ou ').\n");
        }
    }
    else
    {
        if (strcmp (command, "aide") == 0)
        {
            printf ("aide/help/?\n");
            printf ("  Display the description of the commands\n");
            printf ("aide/help/? [command]\n");
            printf ("  Display the description of the specified command\n");
        }
        else if (strcmp (command, "help") == 0)
        {
            printf ("aide/help/?\n");
            printf ("  Display the description of the commands\n");
            printf ("aide/help/? [command]\n");
            printf ("  Display the description of the specified command\n");
// general commands
        }
        else if (strcmp (command, "add") == 0)
        {
            printf ("add <account_name> <sex> <password>\n");
            printf
                ("  Create an account with the default email (a@a.com).\n");
            printf
                ("  Concerning the sex, only the first letter is used (F or M).\n");
            printf
                ("  The e-mail is set to a@a.com (default e-mail). It's like to have no e-mail.\n");
            printf ("  When the password is omitted,\n");
            printf
                ("  the input is done without displaying of the pressed keys.\n");
            printf ("  <example> add testname Male testpass\n");
        }
        else if (strcmp (command, "ban") == 0)
        {
            printf ("ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
            printf
                ("  Changes the final date of a banishment of an account.\n");
            printf ("  Like banset, but <account name> is at end.\n");
        }
        else if (strcmp (command, "banadd") == 0)
        {
            printf ("banadd <account_name> <modifier>\n");
            printf
                ("  Adds or substracts time from the final date of a banishment of an account.\n");
            printf ("  Modifier is done as follows:\n");
            printf ("    Adjustment value (-1, 1, +1, etc...)\n");
            printf ("    Modified element:\n");
            printf ("      a or y: year\n");
            printf ("      m:  month\n");
            printf ("      j or d: day\n");
            printf ("      h:  hour\n");
            printf ("      mn: minute\n");
            printf ("      s:  second\n");
            printf ("  <example> banadd testname +1m-2mn1s-6y\n");
            printf
                ("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
            printf ("            and 6 years at the same time.\n");
            printf
                ("NOTE: If you modify the final date of a non-banished account,\n");
            printf
                ("      you fix the final date to (actual time +- adjustments)\n");
        }
        else if (strcmp (command, "banset") == 0)
        {
            printf ("banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
            printf
                ("  Changes the final date of a banishment of an account.\n");
            printf ("  Default time [hh:mm:ss]: 23:59:59.\n");
            printf ("banset <account_name> 0\n");
            printf ("  Set a non-banished account (0 = unbanished).\n");
        }
        else if (strcmp (command, "block") == 0)
        {
            printf ("block <account name>\n");
            printf
                ("  Set state 5 (You have been blocked by the GM Team) to an account.\n");
            printf ("  This command works like state <account_name> 5.\n");
        }
        else if (strcmp (command, "check") == 0)
        {
            printf ("check <account_name> <password>\n");
            printf ("  Check the validity of a password for an account.\n");
            printf ("  NOTE: Server will never sends back a password.\n");
            printf
                ("        It's the only method you have to know if a password is correct.\n");
            printf
                ("        The other method is to have a ('physical') access to the accounts file.\n");
        }
        else if (strcmp (command, "create") == 0)
        {
            printf ("create <account_name> <sex> <email> <password>\n");
            printf ("  Like the 'add' command, but with e-mail moreover.\n");
            printf
                ("  <example> create testname Male my@mail.com testpass\n");
        }
        else if (strcmp (command, "delete") == 0)
        {
            printf ("del <account name>\n");
            printf ("  Remove an account.\n");
            printf
                ("  This order requires confirmation. After confirmation, the account is deleted.\n");
        }
        else if (strcmp (command, "email") == 0)
        {
            printf ("email <account_name> <email>\n");
            printf ("  Modify the e-mail of an account.\n");
        }
        else if (strcmp (command, "getcount") == 0)
        {
            printf ("getcount\n");
            printf
                ("  Give the number of players online on all char-servers.\n");
        }
        else if (strcmp (command, "gm") == 0)
        {
            printf ("gm <account_name> [GM_level]\n");
            printf ("  Modify the GM level of an account.\n");
            printf ("  Default value remove GM level (GM level = 0).\n");
            printf ("  <example> gm testname 80\n");
        }
        else if (strcmp (command, "id") == 0)
        {
            printf ("id <account name>\n");
            printf ("  Give the id of an account.\n");
        }
        else if (strcmp (command, "info") == 0)
        {
            printf ("info <account_id>\n");
            printf ("  Display complete information of an account.\n");
        }
        else if (strcmp (command, "kami") == 0)
        {
            printf ("kami <message>\n");
            printf
                ("  Sends a broadcast message on all map-server (in yellow).\n");
        }
        else if (strcmp (command, "kamib") == 0)
        {
            printf ("kamib <message>\n");
            printf
                ("  Sends a broadcast message on all map-server (in blue).\n");
        }
        else if (strcmp (command, "language") == 0)
        {
            printf ("language <language>\n");
            printf ("  Change the language of displaying.\n");
            printf ("  Possible languages: Français or English.\n");
        }
        else if (strcmp (command, "list") == 0)
        {
            printf ("list/ls [start_id [end_id]]\n");
            printf ("  Display a list of accounts.\n");
            printf
                ("  'start_id', 'end_id': indicate end and start identifiers.\n");
            printf
                ("  Research by name is not possible with this command.\n");
            printf ("  <example> list 10 9999999\n");
        }
        else if (strcmp (command, "itemfrob") == 0)
        {
            printf ("itemfrob <source-id> <dest-id>\n");
            printf ("  Translates item IDs for all accounts.\n");
            printf
                ("  Any items matching the source item ID will be mapped to the dest-id.\n");
            printf ("  <example> itemfrob 500 700\n");
        }
        else if (strcmp (command, "listban") == 0)
        {
            printf ("listBan/lsBan [start_id [end_id]]\n");
            printf
                ("  Like list/ls, but only for accounts with state or banished.\n");
        }
        else if (strcmp (command, "listgm") == 0)
        {
            printf ("listGM/lsGM [start_id [end_id]]\n");
            printf ("  Like list/ls, but only for GM accounts.\n");
        }
        else if (strcmp (command, "listok") == 0)
        {
            printf ("listOK/lsOK [start_id [end_id]]\n");
            printf
                ("  Like list/ls, but only for accounts without state and not banished.\n");
        }
        else if (strcmp (command, "memo") == 0)
        {
            printf ("memo <account_name> <memo>\n");
            printf ("  Modify the memo of an account.\n");
            printf
                ("  'memo': it can have until 253 characters (with spaces or not).\n");
        }
        else if (strcmp (command, "name") == 0)
        {
            printf ("name <account_id>\n");
            printf ("  Give the name of an account.\n");
        }
        else if (strcmp (command, "password") == 0)
        {
            printf ("passwd <account_name> <new_password>\n");
            printf ("  Change the password of an account.\n");
            printf ("  When new password is omitted,\n");
            printf
                ("  the input is done without displaying of the pressed keys.\n");
        }
        else if (strcmp (command, "reloadgm") == 0)
        {
            printf ("reloadGM\n");
            printf ("  Reload GM configuration file\n");
        }
        else if (strcmp (command, "search") == 0)
        {
            printf ("search <expression>\n");
            printf ("  Seek accounts.\n");
            printf ("  Displays the accounts whose names correspond.\n");
//          printf("search -r/-e/--expr/--regex <expression>\n");
//          printf("  Seek accounts by regular expression.\n");
//          printf("  Displays the accounts whose names correspond.\n");
        }
        else if (strcmp (command, "sex") == 0)
        {
            printf ("sex <account_name> <sex>\n");
            printf ("  Modify the sex of an account.\n");
            printf ("  <example> sex testname Male\n");
        }
        else if (strcmp (command, "state") == 0)
        {
            printf ("state <account_name> <new_state> <error_message_#7>\n");
            printf ("  Change the state of an account.\n");
            printf
                ("  'new_state': state is the state of the packet 0x006a + 1.\n");
            printf ("               The possibilities are:\n");
            printf ("               0 = Account ok\n");
            printf ("               1 = Unregistered ID\n");
            printf ("               2 = Incorrect Password\n");
            printf ("               3 = This ID is expired\n");
            printf ("               4 = Rejected from Server\n");
            printf
                ("               5 = You have been blocked by the GM Team\n");
            printf
                ("               6 = Your Game's EXE file is not the latest version\n");
            printf
                ("               7 = You are Prohibited to log in until...\n");
            printf
                ("               8 = Server is jammed due to over populated\n");
            printf ("               9 = No MSG\n");
            printf ("               100 = This ID has been totally erased\n");
            printf
                ("               all other values are 'No MSG', then use state 9 please.\n");
            printf ("  'error_message_#7': message of the code error 6\n");
            printf
                ("                      = Your are Prohibited to log in until... (packet 0x006a)\n");
        }
        else if (strcmp (command, "timeadd") == 0)
        {
            printf ("timeadd <account_name> <modifier>\n");
            printf
                ("  Adds or substracts time from the validity limit of an account.\n");
            printf ("  Modifier is done as follows:\n");
            printf ("    Adjustment value (-1, 1, +1, etc...)\n");
            printf ("    Modified element:\n");
            printf ("      a or y: year\n");
            printf ("      m:  month\n");
            printf ("      j or d: day\n");
            printf ("      h:  hour\n");
            printf ("      mn: minute\n");
            printf ("      s:  second\n");
            printf ("  <example> timeadd testname +1m-2mn1s-6y\n");
            printf
                ("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
            printf ("            and 6 years at the same time.\n");
            printf ("NOTE: You can not modify a unlimited validity limit.\n");
            printf
                ("      If you want modify it, you want probably create a limited validity limit.\n");
            printf
                ("      So, at first, you must set the validity limit to a date/time.\n");
        }
        else if (strcmp (command, "timeadd") == 0)
        {
            printf ("timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
            printf ("  Changes the validity limit of an account.\n");
            printf ("  Default time [hh:mm:ss]: 23:59:59.\n");
            printf ("timeset <account_name> 0\n");
            printf ("  Gives an unlimited validity limit (0 = unlimited).\n");
        }
        else if (strcmp (command, "unban") == 0)
        {
            printf ("unban/unbanish <account name>\n");
            printf ("  Remove the banishment of an account.\n");
            printf ("  This command works like banset <account_name> 0.\n");
        }
        else if (strcmp (command, "unblock") == 0)
        {
            printf ("unblock <account name>\n");
            printf ("  Set state 0 (Account ok) to an account.\n");
            printf ("  This command works like state <account_name> 0.\n");
        }
        else if (strcmp (command, "version") == 0)
        {
            printf ("version\n");
            printf ("  Display the version of the login-server.\n");
        }
        else if (strcmp (command, "who") == 0)
        {
            printf ("who <account name>\n");
            printf ("  Displays complete information of an account.\n");
// quit
        }
        else if (strcmp (command, "quit") == 0 ||
                 strcmp (command, "exit") == 0 ||
                 strcmp (command, "end") == 0)
        {
            printf ("quit/end/exit\n");
            printf ("  End of the program of administration.\n");
// unknown command
        }
        else
        {
            if (strlen (command) > 0)
                printf
                    ("Unknown command [%s] for help. Displaying of all commands.\n",
                     command);
            printf
                (" aide/help/?                          -- Display this help\n");
            printf
                (" aide/help/? [command]                -- Display the help of the command\n");
            printf
                (" add <account_name> <sex> <password>  -- Create an account with default email\n");
            printf
                (" ban/banish yyyy/mm/dd hh:mm:ss <account name> -- Change final date of a ban\n");
            printf
                (" banadd/ba <account_name> <modifier>  -- Add or substract time from the final\n");
            printf
                ("   example: ba apple +1m-2mn1s-2y        date of a banishment of an account\n");
            printf
                (" banset/bs <account_name> yyyy/mm/dd [hh:mm:ss] -- Change final date of a ban\n");
            printf
                (" banset/bs <account_name> 0           -- Un-banish an account\n");
            printf
                (" block <account name>     -- Set state 5 (blocked by the GM Team) to an account\n");
            printf
                (" check <account_name> <password>      -- Check the validity of a password\n");
            printf
                (" create <account_name> <sex> <email> <passwrd> -- Create an account with email\n");
            printf
                (" del <account name>                   -- Remove an account\n");
            printf
                (" email <account_name> <email>         -- Modify an email of an account\n");
            printf
                (" getcount                             -- Give the number of players online\n");
            printf
                (" gm <account_name> [GM_level]         -- Modify the GM level of an account\n");
            printf
                (" id <account name>                    -- Give the id of an account\n");
            printf
                (" info <account_id>                    -- Display all information of an account\n");
            printf
                (" itemfrob <source-id> <dest-id>       -- Map all items from one item ID to another\n");
            printf
                (" kami <message>                       -- Sends a broadcast message (in yellow)\n");
            printf
                (" kamib <message>                      -- Sends a broadcast message (in blue)\n");
            printf
                (" language <language>                  -- Change the language of displaying.\n");
            printf
                (" list/ls [First_id [Last_id]]         -- Display a list of accounts\n");
            printf
                (" listBan/lsBan [First_id [Last_id] ]  -- Display a list of accounts\n");
            printf
                ("                                         with state or banished\n");
            printf
                (" listGM/lsGM [First_id [Last_id]]     -- Display a list of GM accounts\n");
            printf
                (" listOK/lsOK [First_id [Last_id] ]    -- Display a list of accounts\n");
            printf
                ("                                         without state and not banished\n");
            printf
                (" memo <account_name> <memo>           -- Modify the memo of an account\n");
            printf
                (" name <account_id>                    -- Give the name of an account\n");
            printf
                (" passwd <account_name> <new_password> -- Change the password of an account\n");
            printf
                (" quit/end/exit                        -- End of the program of administation\n");
            printf
                (" reloadGM                             -- Reload GM configuration file\n");
            printf
                (" search <expression>                  -- Seek accounts\n");
//          printf(" search -e/-r/--expr/--regex <expressn> -- Seek accounts by regular-expression\n");
            printf
                (" sex <nomcompte> <sexe>               -- Modify the sex of an account\n");
            printf
                (" state <account_name> <new_state> <error_message_#7> -- Change the state\n");
            printf
                (" timeadd/ta <account_name> <modifier> -- Add or substract time from the\n");
            printf
                ("   example: ta apple +1m-2mn1s-2y        validity limit of an account\n");
            printf
                (" timeset/ts <account_name> yyyy/mm/dd [hh:mm:ss] -- Change the validify limit\n");
            printf
                (" timeset/ts <account_name> 0          -- Give a unlimited validity limit\n");
            printf
                (" unban/unbanish <account name>        -- Remove the banishment of an account\n");
            printf
                (" unblock <account name>               -- Set state 0 (Account ok) to an account\n");
            printf
                (" version                              -- Gives the version of the login-server\n");
            printf
                (" who <account name>                   -- Display all information of an account\n");
            printf
                (" who <account name>                   -- Display all information of an account\n");
            printf
                (" Note: To use spaces in an account name, type \"<account name>\" (or ').\n");
        }
    }
}

//-----------------------------
// Sub-function: add an account
//-----------------------------
int addaccount (char *param, int emailflag)
{
    char name[1023], sex[1023], email[1023], password[1023];
//  int i;

    memset (name, '\0', sizeof (name));
    memset (sex, '\0', sizeof (sex));
    memset (email, '\0', sizeof (email));
    memset (password, '\0', sizeof (password));

    if (emailflag == 0)
    {                           // add command
        if (sscanf (param, "\"%[^\"]\" %s %[^\r\n]", name, sex, password) < 2 &&    // password can be void
            sscanf (param, "'%[^']' %s %[^\r\n]", name, sex, password) < 2 &&   // password can be void
            sscanf (param, "%s %s %[^\r\n]", name, sex, password) < 2)
        {                       // password can be void
            if (defaultlanguage == 'F')
            {
                printf
                    ("Entrez un nom de compte, un sexe et un mot de passe svp.\n");
                printf ("<exemple> add nomtest Male motdepassetest\n");
                ladmin_log
                    ("Nombre incorrect de paramètres pour créer un compte (commande 'add')."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please input an account name, a sex and a password.\n");
                printf ("<example> add testname Male testpass\n");
                ladmin_log
                    ("Incomplete parameters to create an account ('add' command)."
                     RETCODE);
            }
            return 136;
        }
        strcpy (email, "a@a.com");  // default email
    }
    else
    {                           // 1: create command
        if (sscanf (param, "\"%[^\"]\" %s %s %[^\r\n]", name, sex, email, password) < 3 &&  // password can be void
            sscanf (param, "'%[^']' %s %s %[^\r\n]", name, sex, email, password) < 3 && // password can be void
            sscanf (param, "%s %s %s %[^\r\n]", name, sex, email,
                    password) < 3)
        {                       // password can be void
            if (defaultlanguage == 'F')
            {
                printf
                    ("Entrez un nom de compte, un sexe et un mot de passe svp.\n");
                printf
                    ("<exemple> create nomtest Male mo@mail.com motdepassetest\n");
                ladmin_log
                    ("Nombre incorrect de paramètres pour créer un compte (commande 'create')."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please input an account name, a sex and a password.\n");
                printf
                    ("<example> create testname Male my@mail.com testpass\n");
                ladmin_log
                    ("Incomplete parameters to create an account ('create' command)."
                     RETCODE);
            }
            return 136;
        }
    }
    if (verify_accountname (name) == 0)
    {
        return 102;
    }

/*	for(i = 0; name[i]; i++) {
		if (strchr("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz-_", name[i]) == NULL) {
			if (defaultlanguage == 'F') {
				printf("Caractère interdit (%c) trouvé dans le nom du compte (%d%s caractère).\n", name[i], i+1, makeordinal(i+1));
				ladmin_log("Caractère interdit (%c) trouvé dans le nom du compte (%d%s caractère)." RETCODE, name[i], i+1, makeordinal(i+1));
			} else {
				printf("Illegal character (%c) found in the account name (%d%s character).\n", name[i], i+1, makeordinal(i+1));
				ladmin_log("Illegal character (%c) found in the account name (%d%s character)." RETCODE, name[i], i+1, makeordinal(i+1));
			}
			return 101;
		}
	}*/

    sex[0] = toupper (sex[0]);
    if (strchr ("MF", sex[0]) == NULL)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex);
            ladmin_log ("Sexe incorrect [%s]. Entrez M ou F svp." RETCODE,
                        sex);
        }
        else
        {
            printf ("Illegal gender [%s]. Please input M or F.\n", sex);
            ladmin_log ("Illegal gender [%s]. Please input M or F." RETCODE,
                        sex);
        }
        return 103;
    }

    if (strlen (email) < 3)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Email trop courte [%s]. Entrez une e-mail valide svp.\n",
                    email);
            ladmin_log
                ("Email trop courte [%s]. Entrez une e-mail valide svp."
                 RETCODE, email);
        }
        else
        {
            printf ("Email is too short [%s]. Please input a valid e-mail.\n",
                    email);
            ladmin_log
                ("Email is too short [%s]. Please input a valid e-mail."
                 RETCODE, email);
        }
        return 109;
    }
    if (strlen (email) > 39)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n",
                 email);
            ladmin_log
                ("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp."
                 RETCODE, email);
        }
        else
        {
            printf
                ("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n",
                 email);
            ladmin_log
                ("Email is too long [%s]. Please input an e-mail with 39 bytes at the most."
                 RETCODE, email);
        }
        return 109;
    }
    if (e_mail_check (email) == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Email incorrecte [%s]. Entrez une e-mail valide svp.\n",
                    email);
            ladmin_log ("Email incorrecte [%s]. Entrez une e-mail valide svp."
                        RETCODE, email);
        }
        else
        {
            printf ("Invalid email [%s]. Please input a valid e-mail.\n",
                    email);
            ladmin_log ("Invalid email [%s]. Please input a valid e-mail."
                        RETCODE, email);
        }
        return 109;
    }

    if (strlen (password) == 0)
    {
        if (typepasswd (password) == 0)
            return 108;
    }
    if (verify_password (password) == 0)
        return 104;

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour créer un compte."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to create an account." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7930;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    memcpy (WFIFOP (login_fd, 26), password, 24);
    WFIFOB (login_fd, 50) = sex[0];
    memcpy (WFIFOP (login_fd, 51), email, 40);
    WFIFOSET (login_fd, 91);
    bytes_to_read = 1;

    return 0;
}

//---------------------------------------------------------------------------------
// Sub-function: Add/substract time to the final date of a banishment of an account
//---------------------------------------------------------------------------------
int banaddaccount (char *param)
{
    char name[1023], modif[1023];
    int  year, month, day, hour, minute, second;
    char *p_modif;
    int  value, i;

    memset (name, '\0', sizeof (name));
    memset (modif, '\0', sizeof (modif));
    year = month = day = hour = minute = second = 0;

    if (sscanf (param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 &&
        sscanf (param, "'%[^']' %[^\r\n]", name, modif) < 2 &&
        sscanf (param, "%s %[^\r\n]", name, modif) < 2)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte et un modificateur svp.\n");
            printf ("  <exemple> banadd nomtest +1m-2mn1s-6y\n");
            printf
                ("            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
            printf ("            et 6 ans dans le même temps.\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour modifier la fin de ban d'un compte (commande 'banadd')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name and a modifier.\n");
            printf ("  <example>: banadd testname +1m-2mn1s-6y\n");
            printf
                ("             this example adds 1 month and 1 second, and substracts 2 minutes\n");
            printf ("             and 6 years at the same time.\n");
            ladmin_log
                ("Incomplete parameters to modify the ban date/time of an account ('banadd' command)."
                 RETCODE);
        }
        return 136;
    }
    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    // lowercase for modif
    for (i = 0; modif[i]; i++)
        modif[i] = tolower (modif[i]);
    p_modif = modif;
    while (strlen (p_modif) > 0)
    {
        value = atoi (p_modif);
        if (value == 0)
        {
            p_modif++;
        }
        else
        {
            if (p_modif[0] == '-' || p_modif[0] == '+')
                p_modif++;
            while (strlen (p_modif) > 0 && p_modif[0] >= '0'
                   && p_modif[0] <= '9')
            {
                p_modif++;
            }
            if (p_modif[0] == 's')
            {
                second = value;
                p_modif++;
            }
            else if (p_modif[0] == 'm' && p_modif[1] == 'n')
            {
                minute = value;
                p_modif += 2;
            }
            else if (p_modif[0] == 'h')
            {
                hour = value;
                p_modif++;
            }
            else if (p_modif[0] == 'd' || p_modif[0] == 'j')
            {
                day = value;
                p_modif += 2;
            }
            else if (p_modif[0] == 'm')
            {
                month = value;
                p_modif++;
            }
            else if (p_modif[0] == 'y' || p_modif[0] == 'a')
            {
                year = value;
                p_modif++;
            }
            else
            {
                p_modif++;
            }
        }
    }

    if (defaultlanguage == 'F')
    {
        printf (" année:   %d\n", year);
        printf (" mois:    %d\n", month);
        printf (" jour:    %d\n", day);
        printf (" heure:   %d\n", hour);
        printf (" minute:  %d\n", minute);
        printf (" seconde: %d\n", second);
    }
    else
    {
        printf (" year:   %d\n", year);
        printf (" month:  %d\n", month);
        printf (" day:    %d\n", day);
        printf (" hour:   %d\n", hour);
        printf (" minute: %d\n", minute);
        printf (" second: %d\n", second);
    }

    if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0
        && second == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Vous devez entrer un ajustement avec cette commande, svp:\n");
            printf ("  Valeur d'ajustement (-1, 1, +1, etc...)\n");
            printf ("  Element modifié:\n");
            printf ("    a ou y: année\n");
            printf ("    m:      mois\n");
            printf ("    j ou d: jour\n");
            printf ("    h:      heure\n");
            printf ("    mn:     minute\n");
            printf ("    s:      seconde\n");
            printf ("  <exemple> banadd nomtest +1m-2mn1s-6y\n");
            printf
                ("            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
            printf ("            et 6 ans dans le même temps.\n");
            ladmin_log
                ("Aucun ajustement n'est pas un ajustement (commande 'banadd')."
                 RETCODE);
        }
        else
        {
            printf ("Please give an adjustment with this command:\n");
            printf ("  Adjustment value (-1, 1, +1, etc...)\n");
            printf ("  Modified element:\n");
            printf ("    a or y: year\n");
            printf ("    m: month\n");
            printf ("    j or d: day\n");
            printf ("    h: hour\n");
            printf ("    mn: minute\n");
            printf ("    s: second\n");
            printf ("  <example> banadd testname +1m-2mn1s-6y\n");
            printf
                ("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
            printf ("            and 6 years at the same time.\n");
            ladmin_log
                ("No adjustment isn't an adjustment ('banadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (year > 127 || year < -127)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement d'années correct (de -127 à 127), svp.\n");
            ladmin_log
                ("Ajustement de l'année hors norme (commande 'banadd')."
                 RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the years (from -127 to 127).\n");
            ladmin_log
                ("Abnormal adjustement for the year ('banadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (month > 255 || month < -255)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement de mois correct (de -255 à 255), svp.\n");
            ladmin_log ("Ajustement du mois hors norme (commande 'banadd')."
                        RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the months (from -255 to 255).\n");
            ladmin_log
                ("Abnormal adjustement for the month ('banadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (day > 32767 || day < -32767)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n");
            ladmin_log ("Ajustement des jours hors norme (commande 'banadd')."
                        RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the days (from -32767 to 32767).\n");
            ladmin_log
                ("Abnormal adjustement for the days ('banadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (hour > 32767 || hour < -32767)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n");
            ladmin_log
                ("Ajustement des heures hors norme (commande 'banadd')."
                 RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the hours (from -32767 to 32767).\n");
            ladmin_log
                ("Abnormal adjustement for the hours ('banadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (minute > 32767 || minute < -32767)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n");
            ladmin_log
                ("Ajustement des minutes hors norme (commande 'banadd')."
                 RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the minutes (from -32767 to 32767).\n");
            ladmin_log
                ("Abnormal adjustement for the minutes ('banadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (second > 32767 || second < -32767)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n");
            ladmin_log
                ("Ajustement des secondes hors norme (commande 'banadd')."
                 RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the seconds (from -32767 to 32767).\n");
            ladmin_log
                ("Abnormal adjustement for the seconds ('banadd' command)."
                 RETCODE);
        }
        return 137;
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour modifier la date d'un bannissement."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to modify a ban date/time."
                    RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x794c;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    WFIFOW (login_fd, 26) = (short) year;
    WFIFOW (login_fd, 28) = (short) month;
    WFIFOW (login_fd, 30) = (short) day;
    WFIFOW (login_fd, 32) = (short) hour;
    WFIFOW (login_fd, 34) = (short) minute;
    WFIFOW (login_fd, 36) = (short) second;
    WFIFOSET (login_fd, 38);
    bytes_to_read = 1;

    return 0;
}

//-----------------------------------------------------------------------
// Sub-function of sub-function banaccount, unbanaccount or bansetaccount
// Set the final date of a banishment of an account
//-----------------------------------------------------------------------
int bansetaccountsub (char *name, char *date, char *time)
{
    int  year, month, day, hour, minute, second;
    time_t ban_until_time;      // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban)
    struct tm *tmtime;

    year = month = day = hour = minute = second = 0;
    ban_until_time = 0;
    tmtime = localtime (&ban_until_time);   // initialize

    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    if (atoi (date) != 0 &&
        ((sscanf (date, "%d/%d/%d", &year, &month, &day) < 3 &&
          sscanf (date, "%d-%d-%d", &year, &month, &day) < 3 &&
          sscanf (date, "%d.%d.%d", &year, &month, &day) < 3) ||
         sscanf (time, "%d:%d:%d", &hour, &minute, &second) < 3))
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n");
            printf
                ("Vous pouvez aussi mettre 0 à la place si vous utilisez la commande 'banset'.\n");
            ladmin_log
                ("Format incorrect pour la date/heure (commande'banset' ou 'ban')."
                 RETCODE);
        }
        else
        {
            printf
                ("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n");
            printf
                ("You can imput 0 instead of if you use 'banset' command.\n");
            ladmin_log
                ("Invalid format for the date/time ('banset' or 'ban' command)."
                 RETCODE);
        }
        return 102;
    }

    if (atoi (date) == 0)
    {
        ban_until_time = 0;
    }
    else
    {
        if (year < 70)
        {
            year = year + 100;
        }
        if (year >= 1900)
        {
            year = year - 1900;
        }
        if (month < 1 || month > 12)
        {
            if (defaultlanguage == 'F')
            {
                printf ("Entrez un mois correct svp (entre 1 et 12).\n");
                ladmin_log
                    ("Mois incorrect pour la date (command 'banset' ou 'ban')."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for the month (from 1 to 12).\n");
                ladmin_log
                    ("Invalid month for the date ('banset' or 'ban' command)."
                     RETCODE);
            }
            return 102;
        }
        month = month - 1;
        if (day < 1 || day > 31)
        {
            if (defaultlanguage == 'F')
            {
                printf ("Entrez un jour correct svp (entre 1 et 31).\n");
                ladmin_log
                    ("Jour incorrect pour la date (command 'banset' ou 'ban')."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for the day (from 1 to 31).\n");
                ladmin_log
                    ("Invalid day for the date ('banset' or 'ban' command)."
                     RETCODE);
            }
            return 102;
        }
        if (((month == 3 || month == 5 || month == 8 || month == 10)
             && day > 30) || (month == 1 && day > 29))
        {
            if (defaultlanguage == 'F')
            {
                printf
                    ("Entrez un jour correct en fonction du mois (%d) svp.\n",
                     month);
                ladmin_log
                    ("Jour incorrect pour ce mois correspondant (command 'banset' ou 'ban')."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for a day of this month (%d).\n",
                     month);
                ladmin_log
                    ("Invalid day for this month ('banset' or 'ban' command)."
                     RETCODE);
            }
            return 102;
        }
        if (hour < 0 || hour > 23)
        {
            if (defaultlanguage == 'F')
            {
                printf ("Entrez une heure correcte svp (entre 0 et 23).\n");
                ladmin_log
                    ("Heure incorrecte pour l'heure (command 'banset' ou 'ban')."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for the hour (from 0 to 23).\n");
                ladmin_log
                    ("Invalid hour for the time ('banset' or 'ban' command)."
                     RETCODE);
            }
            return 102;
        }
        if (minute < 0 || minute > 59)
        {
            if (defaultlanguage == 'F')
            {
                printf
                    ("Entrez des minutes correctes svp (entre 0 et 59).\n");
                ladmin_log
                    ("Minute incorrecte pour l'heure (command 'banset' ou 'ban')."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for the minutes (from 0 to 59).\n");
                ladmin_log
                    ("Invalid minute for the time ('banset' or 'ban' command)."
                     RETCODE);
            }
            return 102;
        }
        if (second < 0 || second > 59)
        {
            if (defaultlanguage == 'F')
            {
                printf
                    ("Entrez des secondes correctes svp (entre 0 et 59).\n");
                ladmin_log
                    ("Seconde incorrecte pour l'heure (command 'banset' ou 'ban')."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for the seconds (from 0 to 59).\n");
                ladmin_log
                    ("Invalid second for the time ('banset' or 'ban' command)."
                     RETCODE);
            }
            return 102;
        }
        tmtime->tm_year = year;
        tmtime->tm_mon = month;
        tmtime->tm_mday = day;
        tmtime->tm_hour = hour;
        tmtime->tm_min = minute;
        tmtime->tm_sec = second;
        tmtime->tm_isdst = -1;  // -1: no winter/summer time modification
        ban_until_time = timegm (tmtime);
        if (ban_until_time == -1)
        {
            if (defaultlanguage == 'F')
            {
                printf ("Date incorrecte.\n");
                printf
                    ("Entrez une date et une heure svp (format: aaaa/mm/jj hh:mm:ss).\n");
                printf
                    ("Vous pouvez aussi mettre 0 à la place si vous utilisez la commande 'banset'.\n");
                ladmin_log ("Date incorrecte. (command 'banset' ou 'ban')."
                            RETCODE);
            }
            else
            {
                printf ("Invalid date.\n");
                printf
                    ("Please input a date and a time (format: yyyy/mm/dd hh:mm:ss).\n");
                printf
                    ("You can imput 0 instead of if you use 'banset' command.\n");
                ladmin_log ("Invalid date. ('banset' or 'ban' command)."
                            RETCODE);
            }
            return 102;
        }
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour fixer un ban."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to set a ban." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x794a;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    WFIFOL (login_fd, 26) = (int) ban_until_time;
    WFIFOSET (login_fd, 30);
    bytes_to_read = 1;

    return 0;
}

//---------------------------------------------------------------------
// Sub-function: Set the final date of a banishment of an account (ban)
//---------------------------------------------------------------------
int banaccount (char *param)
{
    char name[1023], date[1023], time[1023];

    memset (name, '\0', sizeof (name));
    memset (date, '\0', sizeof (date));
    memset (time, '\0', sizeof (time));

    if (sscanf (param, "%s %s \"%[^\"]\"", date, time, name) < 3 &&
        sscanf (param, "%s %s '%[^']'", date, time, name) < 3 &&
        sscanf (param, "%s %s %[^\r\n]", date, time, name) < 3)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte, une date et une heure svp.\n");
            printf
                ("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
            printf ("           banset <nom_du_compte> 0    (0 = dé-bani)\n");
            printf
                ("           ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n");
            printf ("           unban/unbanish <nom du compte>\n");
            printf ("           Heure par défaut [hh:mm:ss]: 23:59:59.\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour fixer un ban (commande 'banset' ou 'ban')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name, a date and a hour.\n");
            printf
                ("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
            printf
                ("           banset <account_name> 0   (0 = un-banished)\n");
            printf
                ("           ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
            printf ("           unban/unbanish <account name>\n");
            printf ("           Default time [hh:mm:ss]: 23:59:59.\n");
            ladmin_log
                ("Incomplete parameters to set a ban ('banset' or 'ban' command)."
                 RETCODE);
        }
        return 136;
    }

    return bansetaccountsub (name, date, time);
}

//------------------------------------------------------------------------
// Sub-function: Set the final date of a banishment of an account (banset)
//------------------------------------------------------------------------
int bansetaccount (char *param)
{
    char name[1023], date[1023], time[1023];

    memset (name, '\0', sizeof (name));
    memset (date, '\0', sizeof (date));
    memset (time, '\0', sizeof (time));

    if (sscanf (param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 &&   // if date = 0, time can be void
        sscanf (param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 &&  // if date = 0, time can be void
        sscanf (param, "%s %s %[^\r\n]", name, date, time) < 2)
    {                           // if date = 0, time can be void
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte, une date et une heure svp.\n");
            printf
                ("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
            printf ("           banset <nom_du_compte> 0    (0 = dé-bani)\n");
            printf
                ("           ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n");
            printf ("           unban/unbanish <nom du compte>\n");
            printf ("           Heure par défaut [hh:mm:ss]: 23:59:59.\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour fixer un ban (commande 'banset' ou 'ban')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name, a date and a hour.\n");
            printf
                ("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
            printf
                ("           banset <account_name> 0   (0 = un-banished)\n");
            printf
                ("           ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
            printf ("           unban/unbanish <account name>\n");
            printf ("           Default time [hh:mm:ss]: 23:59:59.\n");
            ladmin_log
                ("Incomplete parameters to set a ban ('banset' or 'ban' command)."
                 RETCODE);
        }
        return 136;
    }

    if (time[0] == '\0')
        strcpy (time, "23:59:59");

    return bansetaccountsub (name, date, time);
}

//-------------------------------------------------
// Sub-function: unbanishment of an account (unban)
//-------------------------------------------------
int unbanaccount (char *param)
{
    char name[1023];

    memset (name, '\0', sizeof (name));

    if (strlen (param) == 0 ||
        (sscanf (param, "\"%[^\"]\"", name) < 1 &&
         sscanf (param, "'%[^']'", name) < 1 &&
         sscanf (param, "%[^\r\n]", name) < 1) || strlen (name) == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte svp.\n");
            printf
                ("<exemple>: banset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
            printf ("           banset <nom_du_compte> 0    (0 = dé-bani)\n");
            printf
                ("           ban/banish aaaa/mm/jj hh:mm:ss <nom du compte>\n");
            printf ("           unban/unbanish <nom du compte>\n");
            printf ("           Heure par défaut [hh:mm:ss]: 23:59:59.\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour fixer un ban (commande 'unban')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name.\n");
            printf
                ("<example>: banset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
            printf
                ("           banset <account_name> 0   (0 = un-banished)\n");
            printf
                ("           ban/banish yyyy/mm/dd hh:mm:ss <account name>\n");
            printf ("           unban/unbanish <account name>\n");
            printf ("           Default time [hh:mm:ss]: 23:59:59.\n");
            ladmin_log
                ("Incomplete parameters to set a ban ('unban' command)."
                 RETCODE);
        }
        return 136;
    }

    return bansetaccountsub (name, "0", "");
}

//---------------------------------------------------------
// Sub-function: Asking to check the validity of a password
// (Note: never send back a password with login-server!! security of passwords)
//---------------------------------------------------------
int checkaccount (char *param)
{
    char name[1023], password[1023];

    memset (name, '\0', sizeof (name));
    memset (password, '\0', sizeof (password));

    if (sscanf (param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 &&    // password can be void
        sscanf (param, "'%[^']' %[^\r\n]", name, password) < 1 &&   // password can be void
        sscanf (param, "%s %[^\r\n]", name, password) < 1)
    {                           // password can be void
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte svp.\n");
            printf ("<exemple> check testname motdepasse\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour tester le mot d'un passe d'un compte (commande 'check')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name.\n");
            printf ("<example> check testname password\n");
            ladmin_log
                ("Incomplete parameters to check the password of an account ('check' command)."
                 RETCODE);
        }
        return 136;
    }

    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    if (strlen (password) == 0)
    {
        if (typepasswd (password) == 0)
            return 134;
    }
    if (verify_password (password) == 0)
        return 131;

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour test un mot de passe."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to check a password." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x793a;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    memcpy (WFIFOP (login_fd, 26), password, 24);
    WFIFOSET (login_fd, 50);
    bytes_to_read = 1;

    return 0;
}

//------------------------------------------------
// Sub-function: Asking for deletion of an account
//------------------------------------------------
int delaccount (char *param)
{
    char name[1023];
    char letter;
    char confirm[1023];
    int  i;

    memset (name, '\0', sizeof (name));

    if (strlen (param) == 0 ||
        (sscanf (param, "\"%[^\"]\"", name) < 1 &&
         sscanf (param, "'%[^']'", name) < 1 &&
         sscanf (param, "%[^\r\n]", name) < 1) || strlen (name) == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte svp.\n");
            printf ("<exemple> del nomtestasupprimer\n");
            ladmin_log
                ("Aucun nom donné pour supprimer un compte (commande 'delete')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name.\n");
            printf ("<example> del testnametodelete\n");
            ladmin_log
                ("No name given to delete an account ('delete' command)."
                 RETCODE);
        }
        return 136;
    }

    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    memset (confirm, '\0', sizeof (confirm));
    while ((confirm[0] != 'o' || defaultlanguage != 'F') && confirm[0] != 'n'
           && (confirm[0] != 'y' || defaultlanguage == 'F'))
    {
        if (defaultlanguage == 'F')
            printf
                ("\033[1;36m ** Etes-vous vraiment sûr de vouloir SUPPRIMER le compte [$userid]? (o/n) > \033[0m");
        else
            printf
                ("\033[1;36m ** Are you really sure to DELETE account [$userid]? (y/n) > \033[0m");
        fflush (stdout);
        memset (confirm, '\0', sizeof (confirm));
        i = 0;
        while ((letter = getchar ()) != '\n')
            confirm[i++] = letter;
    }

    if (confirm[0] == 'n')
    {
        if (defaultlanguage == 'F')
        {
            printf ("Suppression annulée.\n");
            ladmin_log
                ("Suppression annulée par l'utilisateur (commande 'delete')."
                 RETCODE);
        }
        else
        {
            printf ("Deletion canceled.\n");
            ladmin_log ("Deletion canceled by user ('delete' command)."
                        RETCODE);
        }
        return 121;
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour détruire un compte."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to delete an acount." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7932;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    WFIFOSET (login_fd, 26);
    bytes_to_read = 1;

    return 0;
}

//----------------------------------------------------------
// Sub-function: Asking to modification of an account e-mail
//----------------------------------------------------------
int changeemail (char *param)
{
    char name[1023], email[1023];

    memset (name, '\0', sizeof (name));
    memset (email, '\0', sizeof (email));

    if (sscanf (param, "\"%[^\"]\" %[^\r\n]", name, email) < 2 &&
        sscanf (param, "'%[^']' %[^\r\n]", name, email) < 2 &&
        sscanf (param, "%s %[^\r\n]", name, email) < 2)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte et une email svp.\n");
            printf ("<exemple> email testname nouveauemail\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour changer l'email d'un compte (commande 'email')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name and an email.\n");
            printf ("<example> email testname newemail\n");
            ladmin_log
                ("Incomplete parameters to change the email of an account ('email' command)."
                 RETCODE);
        }
        return 136;
    }

    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    if (strlen (email) < 3)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Email trop courte [%s]. Entrez une e-mail valide svp.\n",
                    email);
            ladmin_log
                ("Email trop courte [%s]. Entrez une e-mail valide svp."
                 RETCODE, email);
        }
        else
        {
            printf ("Email is too short [%s]. Please input a valid e-mail.\n",
                    email);
            ladmin_log
                ("Email is too short [%s]. Please input a valid e-mail."
                 RETCODE, email);
        }
        return 109;
    }
    if (strlen (email) > 39)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp.\n",
                 email);
            ladmin_log
                ("Email trop longue [%s]. Entrez une e-mail de 39 caractères maximum svp."
                 RETCODE, email);
        }
        else
        {
            printf
                ("Email is too long [%s]. Please input an e-mail with 39 bytes at the most.\n",
                 email);
            ladmin_log
                ("Email is too long [%s]. Please input an e-mail with 39 bytes at the most."
                 RETCODE, email);
        }
        return 109;
    }
    if (e_mail_check (email) == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Email incorrecte [%s]. Entrez une e-mail valide svp.\n",
                    email);
            ladmin_log ("Email incorrecte [%s]. Entrez une e-mail valide svp."
                        RETCODE, email);
        }
        else
        {
            printf ("Invalid email [%s]. Please input a valid e-mail.\n",
                    email);
            ladmin_log ("Invalid email [%s]. Please input a valid e-mail."
                        RETCODE, email);
        }
        return 109;
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour changer une email."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to change an email." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7940;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    memcpy (WFIFOP (login_fd, 26), email, 40);
    WFIFOSET (login_fd, 66);
    bytes_to_read = 1;

    return 0;
}

//-----------------------------------------------------
// Sub-function: Asking of the number of online players
//-----------------------------------------------------
int getlogincount ()
{
    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour obtenir le nombre de joueurs en jeu."
             RETCODE);
    }
    else
    {
        ladmin_log
            ("Request to login-server to obtain the # of online players."
             RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7938;
    WFIFOSET (login_fd, 2);
    bytes_to_read = 1;

    return 0;
}

//----------------------------------------------------------
// Sub-function: Asking to modify the GM level of an account
//----------------------------------------------------------
int changegmlevel (char *param)
{
    char name[1023];
    int  GM_level;

    memset (name, '\0', sizeof (name));
    GM_level = 0;

    if (sscanf (param, "\"%[^\"]\" %d", name, &GM_level) < 1 &&
        sscanf (param, "'%[^']' %d", name, &GM_level) < 1 &&
        sscanf (param, "%s %d", name, &GM_level) < 1)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte et un niveau de GM svp.\n");
            printf ("<exemple> gm nomtest 80\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour changer le Niveau de GM d'un compte (commande 'gm')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name and a GM level.\n");
            printf ("<example> gm testname 80\n");
            ladmin_log
                ("Incomplete parameters to change the GM level of an account ('gm' command)."
                 RETCODE);
        }
        return 136;
    }

    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    if (GM_level < 0 || GM_level > 99)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Niveau de GM incorrect [%d]. Entrez une valeur de 0 à 99 svp.\n",
                 GM_level);
            ladmin_log
                ("Niveau de GM incorrect [%d]. La valeur peut être de 0 à 99."
                 RETCODE, GM_level);
        }
        else
        {
            printf
                ("Illegal GM level [%d]. Please input a value from 0 to 99.\n",
                 GM_level);
            ladmin_log
                ("Illegal GM level [%d]. The value can be from 0 to 99."
                 RETCODE, GM_level);
        }
        return 103;
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour changer un niveau de GM."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to change a GM level." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x793e;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    WFIFOB (login_fd, 26) = GM_level;
    WFIFOSET (login_fd, 27);
    bytes_to_read = 1;

    return 0;
}

//---------------------------------------------
// Sub-function: Asking to obtain an account id
//---------------------------------------------
int idaccount (char *param)
{
    char name[1023];

    memset (name, '\0', sizeof (name));

    if (strlen (param) == 0 ||
        (sscanf (param, "\"%[^\"]\"", name) < 1 &&
         sscanf (param, "'%[^']'", name) < 1 &&
         sscanf (param, "%[^\r\n]", name) < 1) || strlen (name) == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte svp.\n");
            printf ("<exemple> id nomtest\n");
            ladmin_log
                ("Aucun nom donné pour rechecher l'id d'un compte (commande 'id')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name.\n");
            printf ("<example> id testname\n");
            ladmin_log
                ("No name given to search an account id ('id' command)."
                 RETCODE);
        }
        return 136;
    }

    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour connaître l'id d'un compte."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to know an account id." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7944;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    WFIFOSET (login_fd, 26);
    bytes_to_read = 1;

    return 0;
}

//----------------------------------------------------------------------------
// Sub-function: Asking to displaying information about an account (by its id)
//----------------------------------------------------------------------------
int infoaccount (int account_id)
{
    if (account_id < 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un id ayant une valeur positive svp.\n");
            ladmin_log
                ("Une valeur négative a été donné pour trouver le compte."
                 RETCODE);
        }
        else
        {
            printf ("Please input a positive value for the id.\n");
            ladmin_log ("Negative value was given to found the account."
                        RETCODE);
        }
        return 136;
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour obtenir le information d'un compte (par l'id)."
             RETCODE);
    }
    else
    {
        ladmin_log
            ("Request to login-server to obtain information about an account (by its id)."
             RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7954;
    WFIFOL (login_fd, 2) = account_id;
    WFIFOSET (login_fd, 6);
    bytes_to_read = 1;

    return 0;
}

//---------------------------------------
// Sub-function: Send a broadcast message
//---------------------------------------
int sendbroadcast (short type, char *message)
{
    if (strlen (message) == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un message svp.\n");
            if (type == 0)
            {
                printf ("<exemple> kami un message\n");
            }
            else
            {
                printf ("<exemple> kamib un message\n");
            }
            ladmin_log ("Le message est vide (commande 'kami(b)')." RETCODE);
        }
        else
        {
            printf ("Please input a message.\n");
            if (type == 0)
            {
                printf ("<example> kami a message\n");
            }
            else
            {
                printf ("<example> kamib a message\n");
            }
            ladmin_log ("The message is void ('kami(b)' command)." RETCODE);
        }
        return 136;
    }

    WFIFOW (login_fd, 0) = 0x794e;
    WFIFOW (login_fd, 2) = type;
    WFIFOL (login_fd, 4) = strlen (message) + 1;
    memcpy (WFIFOP (login_fd, 8), message, strlen (message) + 1);
    WFIFOSET (login_fd, 8 + strlen (message) + 1);
    bytes_to_read = 1;

    return 0;
}

//--------------------------------------------
// Sub-function: Change language of displaying
//--------------------------------------------
int changelanguage (char *language)
{
    if (strlen (language) == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez une langue svp.\n");
            printf ("<exemple> language english\n");
            printf ("          language français\n");
            ladmin_log ("La langue est vide (commande 'language')." RETCODE);
        }
        else
        {
            printf ("Please input a language.\n");
            printf ("<example> language english\n");
            printf ("          language français\n");
            ladmin_log ("The language is void ('language' command)." RETCODE);
        }
        return 136;
    }

    language[0] = toupper (language[0]);
    if (language[0] == 'F' || language[0] == 'E')
    {
        defaultlanguage = language[0];
        if (defaultlanguage == 'F')
        {
            printf ("Changement de la langue d'affichage en Français.\n");
            ladmin_log ("Changement de la langue d'affichage en Français."
                        RETCODE);
        }
        else
        {
            printf ("Displaying language changed to English.\n");
            ladmin_log ("Displaying language changed to English." RETCODE);
        }
    }
    else
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Langue non paramétrée (langues possibles: 'Français' ou 'English').\n");
            ladmin_log
                ("Langue non paramétrée (Français ou English nécessaire)."
                 RETCODE);
        }
        else
        {
            printf
                ("Undefined language (possible languages: Français or English).\n");
            ladmin_log ("Undefined language (must be Français or English)."
                        RETCODE);
        }
    }

    return 0;
}

//--------------------------------------------------------
// Sub-function: Asking to Displaying of the accounts list
//--------------------------------------------------------
int listaccount (char *param, int type)
{
//int list_first, list_last, list_type; // parameter to display a list of accounts
    int  i;

    list_type = type;

    // set default values
    list_first = 0;
    list_last = 0;

    if (list_type == 1)
    {                           // if listgm
        // get all accounts = use default
    }
    else if (list_type == 2)
    {                           // if search
        for (i = 0; param[i]; i++)
            param[i] = tolower (param[i]);
        // get all accounts = use default
    }
    else if (list_type == 3)
    {                           // if listban
        // get all accounts = use default
    }
    else if (list_type == 4)
    {                           // if listok
        // get all accounts = use default
    }
    else
    {                           // if list (list_type == 0)
        switch (sscanf (param, "%d %d", &list_first, &list_last))
        {
            case 0:
                // get all accounts = use default
                break;
            case 1:
                list_last = 0;
                // use tests of the following value
            default:
                if (list_first < 0)
                    list_first = 0;
                if (list_last < list_first || list_last < 0)
                    list_last = 0;
                break;
        }
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour obtenir la liste des comptes de %d à %d."
             RETCODE, list_first, list_last);
    }
    else
    {
        ladmin_log
            ("Request to login-server to obtain the list of accounts from %d to %d."
             RETCODE, list_first, list_last);
    }

    WFIFOW (login_fd, 0) = 0x7920;
    WFIFOL (login_fd, 2) = list_first;
    WFIFOL (login_fd, 6) = list_last;
    WFIFOSET (login_fd, 10);
    bytes_to_read = 1;

    //          0123456789 01 01234567890123456789012301234 012345 0123456789012345678901234567
    if (defaultlanguage == 'F')
    {
        Iprintf
            (" id_compte GM nom_utilisateur         sexe   count statut\n");
    }
    else
    {
        Iprintf
            ("account_id GM user_name               sex    count state\n");
    }
    Iprintf
        ("-------------------------------------------------------------------------------\n");
    list_count = 0;

    return 0;
}

//--------------------------------------------------------
// Sub-function: Frobnicate items
//--------------------------------------------------------
int itemfrob (char *param)
{
    int  source_id, dest_id;

    if (sscanf (param, "%d %d", &source_id, &dest_id) < 2)
    {
        printf ("You must provide the source and destination item IDs.\n");
        return 1;
    }

    WFIFOW (login_fd, 0) = 0x7924;
    WFIFOL (login_fd, 2) = source_id;
    WFIFOL (login_fd, 6) = dest_id;
    WFIFOSET (login_fd, 10);
    bytes_to_read = 1;          // all logging is done to the three main servers

    return 0;
}

//--------------------------------------------
// Sub-function: Asking to modify a memo field
//--------------------------------------------
int changememo (char *param)
{
    char name[1023], memo[1023];

    memset (name, '\0', sizeof (name));
    memset (memo, '\0', sizeof (memo));

    if (sscanf (param, "\"%[^\"]\" %[^\r\n]", name, memo) < 1 &&    // memo can be void
        sscanf (param, "'%[^']' %[^\r\n]", name, memo) < 1 &&   // memo can be void
        sscanf (param, "%s %[^\r\n]", name, memo) < 1)
    {                           // memo can be void
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte et un mémo svp.\n");
            printf ("<exemple> memo nomtest nouveau memo\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour changer le mémo d'un compte (commande 'email')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name and a memo.\n");
            printf ("<example> memo testname new memo\n");
            ladmin_log
                ("Incomplete parameters to change the memo of an account ('email' command)."
                 RETCODE);
        }
        return 136;
    }

    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    if (strlen (memo) > 254)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Mémo trop long (%d caractères).\n", strlen (memo));
            printf ("Entrez un mémo de 254 caractères maximum svp.\n");
            ladmin_log
                ("Mémo trop long (%d caractères). Entrez un mémo de 254 caractères maximum svp."
                 RETCODE, strlen (memo));
        }
        else
        {
            printf ("Memo is too long (%d characters).\n", strlen (memo));
            printf ("Please input a memo of 254 bytes at the maximum.\n");
            ladmin_log
                ("Email is too long (%d characters). Please input a memo of 254 bytes at the maximum."
                 RETCODE, strlen (memo));
        }
        return 102;
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour changer un mémo."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to change a memo." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7942;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    WFIFOW (login_fd, 26) = strlen (memo);
    if (strlen (memo) > 0)
        memcpy (WFIFOP (login_fd, 28), memo, strlen (memo));
    WFIFOSET (login_fd, 28 + strlen (memo));
    bytes_to_read = 1;

    return 0;
}

//-----------------------------------------------
// Sub-function: Asking to obtain an account name
//-----------------------------------------------
int nameaccount (int id)
{
    if (id < 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un id ayant une valeur positive svp.\n");
            ladmin_log
                ("Id négatif donné pour rechecher le nom d'un compte (commande 'name')."
                 RETCODE);
        }
        else
        {
            printf ("Please input a positive value for the id.\n");
            ladmin_log
                ("Negativ id given to search an account name ('name' command)."
                 RETCODE);
        }
        return 136;
    }

    if (defaultlanguage == 'F')
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour connaître le nom d'un compte."
             RETCODE);
    else
        ladmin_log ("Request to login-server to know an account name."
                    RETCODE);

    WFIFOW (login_fd, 0) = 0x7946;
    WFIFOL (login_fd, 2) = id;
    WFIFOSET (login_fd, 6);
    bytes_to_read = 1;

    return 0;
}

//------------------------------------------
// Sub-function: Asking to modify a password
// (Note: never send back a password with login-server!! security of passwords)
//------------------------------------------
int changepasswd (char *param)
{
    char name[1023], password[1023];

    memset (name, '\0', sizeof (name));
    memset (password, '\0', sizeof (password));

    if (sscanf (param, "\"%[^\"]\" %[^\r\n]", name, password) < 1 &&
        sscanf (param, "'%[^']' %[^\r\n]", name, password) < 1 &&
        sscanf (param, "%s %[^\r\n]", name, password) < 1)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte svp.\n");
            printf ("<exemple> passwd nomtest nouveaumotdepasse\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour changer le mot d'un passe d'un compte (commande 'password')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name.\n");
            printf ("<example> passwd testname newpassword\n");
            ladmin_log
                ("Incomplete parameters to change the password of an account ('password' command)."
                 RETCODE);
        }
        return 136;
    }

    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    if (strlen (password) == 0)
    {
        if (typepasswd (password) == 0)
            return 134;
    }
    if (verify_password (password) == 0)
        return 131;

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour changer un mot de passe."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to change a password." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7934;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    memcpy (WFIFOP (login_fd, 26), password, 24);
    WFIFOSET (login_fd, 50);
    bytes_to_read = 1;

    return 0;
}

//----------------------------------------------------------------------
// Sub-function: Request to login-server to reload GM configuration file
// this function have no answer
//----------------------------------------------------------------------
int reloadGM ()
{
    WFIFOW (login_fd, 0) = 0x7955;
    WFIFOSET (login_fd, 2);
    bytes_to_read = 0;

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Demande de recharger le fichier de configuration des GM envoyée."
             RETCODE);
        printf
            ("Demande de recharger le fichier de configuration des GM envoyée.\n");
        printf ("Vérifiez les comptes GM actuels (après rechargement):\n");
    }
    else
    {
        ladmin_log ("Request to reload the GM configuration file sended."
                    RETCODE);
        printf ("Request to reload the GM configuration file sended.\n");
        printf ("Check the actual GM accounts (after reloading):\n");
    }
    listaccount (parameters, 1);    // 1: to list only GM

    return 180;
}

//-----------------------------------------------------
// Sub-function: Asking to modify the sex of an account
//-----------------------------------------------------
int changesex (char *param)
{
    char name[1023], sex[1023];

    memset (name, '\0', sizeof (name));
    memset (sex, '\0', sizeof (sex));

    if (sscanf (param, "\"%[^\"]\" %[^\r\n]", name, sex) < 2 &&
        sscanf (param, "'%[^']' %[^\r\n]", name, sex) < 2 &&
        sscanf (param, "%s %[^\r\n]", name, sex) < 2)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte et un sexe svp.\n");
            printf ("<exemple> sex nomtest Male\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour changer le sexe d'un compte (commande 'sex')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name and a sex.\n");
            printf ("<example> sex testname Male\n");
            ladmin_log
                ("Incomplete parameters to change the sex of an account ('sex' command)."
                 RETCODE);
        }
        return 136;
    }

    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    sex[0] = toupper (sex[0]);
    if (strchr ("MF", sex[0]) == NULL)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Sexe incorrect [%s]. Entrez M ou F svp.\n", sex);
            ladmin_log ("Sexe incorrect [%s]. Entrez M ou F svp." RETCODE,
                        sex);
        }
        else
        {
            printf ("Illegal gender [%s]. Please input M or F.\n", sex);
            ladmin_log ("Illegal gender [%s]. Please input M or F." RETCODE,
                        sex);
        }
        return 103;
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour changer un sexe."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to change a sex." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x793c;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    WFIFOB (login_fd, 26) = sex[0];
    WFIFOSET (login_fd, 27);
    bytes_to_read = 1;

    return 0;
}

//-------------------------------------------------------------------------
// Sub-function of sub-function changestate, blockaccount or unblockaccount
// Asking to modify the state of an account
//-------------------------------------------------------------------------
int changestatesub (char *name, int state, char *error_message7)
{
    char error_message[1023];   // need to use, because we can modify error_message7

    memset (error_message, '\0', sizeof (error_message));
    strncpy (error_message, error_message7, sizeof (error_message) - 1);

    if ((state < 0 || state > 9) && state != 100)
    {                           // Valid values: 0: ok, or value of the 0x006a packet + 1
        if (defaultlanguage == 'F')
        {
            printf ("Entrez une des statuts suivantes svp:\n");
            printf
                ("  0 = Compte ok             6 = Your Game's EXE file is not the latest version\n");
        }
        else
        {
            printf ("Please input one of these states:\n");
            printf
                ("  0 = Account ok            6 = Your Game's EXE file is not the latest version\n");
        }
        printf
            ("  1 = Unregistered ID       7 = You are Prohibited to log in until + message\n");
        printf
            ("  2 = Incorrect Password    8 = Server is jammed due to over populated\n");
        printf ("  3 = This ID is expired    9 = No MSG\n");
        printf
            ("  4 = Rejected from Server  100 = This ID has been totally erased\n");
        printf ("  5 = You have been blocked by the GM Team\n");
        if (defaultlanguage == 'F')
        {
            printf ("<exemples> state nomtest 5\n");
            printf ("           state nomtest 7 fin de votre ban\n");
            printf ("           block <nom compte>\n");
            printf ("           unblock <nom compte>\n");
            ladmin_log
                ("Valeur incorrecte pour le statut d'un compte (commande 'state', 'block' ou 'unblock')."
                 RETCODE);
        }
        else
        {
            printf ("<examples> state testname 5\n");
            printf ("           state testname 7 end of your ban\n");
            printf ("           block <account name>\n");
            printf ("           unblock <account name>\n");
            ladmin_log
                ("Invalid value for the state of an account ('state', 'block' or 'unblock' command)."
                 RETCODE);
        }
        return 151;
    }

    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    if (state != 7)
    {
        strcpy (error_message, "-");
    }
    else
    {
        if (strlen (error_message) < 1)
        {
            if (defaultlanguage == 'F')
            {
                printf
                    ("Message d'erreur trop court. Entrez un message de 1-19 caractères.\n");
                ladmin_log
                    ("Message d'erreur trop court. Entrez un message de 1-19 caractères."
                     RETCODE);
            }
            else
            {
                printf
                    ("Error message is too short. Please input a message of 1-19 bytes.\n");
                ladmin_log
                    ("Error message is too short. Please input a message of 1-19 bytes."
                     RETCODE);
            }
            return 102;
        }
        if (strlen (error_message) > 19)
        {
            if (defaultlanguage == 'F')
            {
                printf
                    ("Message d'erreur trop long. Entrez un message de 1-19 caractères.\n");
                ladmin_log
                    ("Message d'erreur trop long. Entrez un message de 1-19 caractères."
                     RETCODE);
            }
            else
            {
                printf
                    ("Error message is too long. Please input a message of 1-19 bytes.\n");
                ladmin_log
                    ("Error message is too long. Please input a message of 1-19 bytes."
                     RETCODE);
            }
            return 102;
        }
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour changer un statut."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to change a state." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7936;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    WFIFOL (login_fd, 26) = state;
    memcpy (WFIFOP (login_fd, 30), error_message, 20);
    WFIFOSET (login_fd, 50);
    bytes_to_read = 1;

    return 0;
}

//-------------------------------------------------------
// Sub-function: Asking to modify the state of an account
//-------------------------------------------------------
int changestate (char *param)
{
    char name[1023], error_message[1023];
    int  state;

    memset (name, '\0', sizeof (name));
    memset (error_message, '\0', sizeof (error_message));

    if (sscanf (param, "\"%[^\"]\" %d %[^\r\n]", name, &state, error_message)
        < 2
        && sscanf (param, "'%[^']' %d %[^\r\n]", name, &state,
                   error_message) < 2
        && sscanf (param, "%s %d %[^\r\n]", name, &state, error_message) < 2)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte et un statut svp.\n");
            printf ("<exemples> state nomtest 5\n");
            printf ("           state nomtest 7 fin de votre ban\n");
            printf ("           block <nom compte>\n");
            printf ("           unblock <nom compte>\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'state')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name and a state.\n");
            printf ("<examples> state testname 5\n");
            printf ("           state testname 7 end of your ban\n");
            printf ("           block <account name>\n");
            printf ("           unblock <account name>\n");
            ladmin_log
                ("Incomplete parameters to change the state of an account ('state' command)."
                 RETCODE);
        }
        return 136;
    }

    return changestatesub (name, state, error_message);
}

//-------------------------------------------
// Sub-function: Asking to unblock an account
//-------------------------------------------
int unblockaccount (char *param)
{
    char name[1023];

    memset (name, '\0', sizeof (name));

    if (strlen (param) == 0 ||
        (sscanf (param, "\"%[^\"]\"", name) < 1 &&
         sscanf (param, "'%[^']'", name) < 1 &&
         sscanf (param, "%[^\r\n]", name) < 1) || strlen (name) == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte svp.\n");
            printf ("<exemples> state nomtest 5\n");
            printf ("           state nomtest 7 fin de votre ban\n");
            printf ("           block <nom compte>\n");
            printf ("           unblock <nom compte>\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'unblock')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name.\n");
            printf ("<examples> state testname 5\n");
            printf ("           state testname 7 end of your ban\n");
            printf ("           block <account name>\n");
            printf ("           unblock <account name>\n");
            ladmin_log
                ("Incomplete parameters to change the state of an account ('unblock' command)."
                 RETCODE);
        }
        return 136;
    }

    return changestatesub (name, 0, "-");   // state 0, no error message
}

//-------------------------------------------
// Sub-function: Asking to unblock an account
//-------------------------------------------
int blockaccount (char *param)
{
    char name[1023];

    memset (name, '\0', sizeof (name));

    if (strlen (param) == 0 ||
        (sscanf (param, "\"%[^\"]\"", name) < 1 &&
         sscanf (param, "'%[^']'", name) < 1 &&
         sscanf (param, "%[^\r\n]", name) < 1) || strlen (name) == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte svp.\n");
            printf ("<exemples> state nomtest 5\n");
            printf ("           state nomtest 7 fin de votre ban\n");
            printf ("           block <nom compte>\n");
            printf ("           unblock <nom compte>\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour changer le statut d'un compte (commande 'block')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name.\n");
            printf ("<examples> state testname 5\n");
            printf ("           state testname 7 end of your ban\n");
            printf ("           block <account name>\n");
            printf ("           unblock <account name>\n");
            ladmin_log
                ("Incomplete parameters to change the state of an account ('block' command)."
                 RETCODE);
        }
        return 136;
    }

    return changestatesub (name, 5, "-");   // state 5, no error message
}

//---------------------------------------------------------------------
// Sub-function: Add/substract time to the validity limit of an account
//---------------------------------------------------------------------
int timeaddaccount (char *param)
{
    char name[1023], modif[1023];
    int  year, month, day, hour, minute, second;
    char *p_modif;
    int  value, i;

    memset (name, '\0', sizeof (name));
    memset (modif, '\0', sizeof (modif));
    year = month = day = hour = minute = second = 0;

    if (sscanf (param, "\"%[^\"]\" %[^\r\n]", name, modif) < 2 &&
        sscanf (param, "'%[^']' %[^\r\n]", name, modif) < 2 &&
        sscanf (param, "%s %[^\r\n]", name, modif) < 2)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte et un modificateur svp.\n");
            printf ("  <exemple> timeadd nomtest +1m-2mn1s-6y\n");
            printf
                ("            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
            printf ("            et 6 ans dans le même temps.\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour modifier une date limite d'utilisation (commande 'timeadd')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name and a modifier.\n");
            printf ("  <example>: timeadd testname +1m-2mn1s-6y\n");
            printf
                ("             this example adds 1 month and 1 second, and substracts 2 minutes\n");
            printf ("             and 6 years at the same time.\n");
            ladmin_log
                ("Incomplete parameters to modify a limit time ('timeadd' command)."
                 RETCODE);
        }
        return 136;
    }
    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    // lowercase for modif
    for (i = 0; modif[i]; i++)
        modif[i] = tolower (modif[i]);
    p_modif = modif;
    while (strlen (p_modif) > 0)
    {
        value = atoi (p_modif);
        if (value == 0)
        {
            p_modif++;
        }
        else
        {
            if (p_modif[0] == '-' || p_modif[0] == '+')
                p_modif++;
            while (strlen (p_modif) > 0 && p_modif[0] >= '0'
                   && p_modif[0] <= '9')
            {
                p_modif++;
            }
            if (p_modif[0] == 's')
            {
                second = value;
                p_modif++;
            }
            else if (p_modif[0] == 'm' && p_modif[1] == 'n')
            {
                minute = value;
                p_modif += 2;
            }
            else if (p_modif[0] == 'h')
            {
                hour = value;
                p_modif++;
            }
            else if (p_modif[0] == 'd' || p_modif[0] == 'j')
            {
                day = value;
                p_modif += 2;
            }
            else if (p_modif[0] == 'm')
            {
                month = value;
                p_modif++;
            }
            else if (p_modif[0] == 'y' || p_modif[0] == 'a')
            {
                year = value;
                p_modif++;
            }
            else
            {
                p_modif++;
            }
        }
    }

    if (defaultlanguage == 'F')
    {
        printf (" année:   %d\n", year);
        printf (" mois:    %d\n", month);
        printf (" jour:    %d\n", day);
        printf (" heure:   %d\n", hour);
        printf (" minute:  %d\n", minute);
        printf (" seconde: %d\n", second);
    }
    else
    {
        printf (" year:   %d\n", year);
        printf (" month:  %d\n", month);
        printf (" day:    %d\n", day);
        printf (" hour:   %d\n", hour);
        printf (" minute: %d\n", minute);
        printf (" second: %d\n", second);
    }

    if (year == 0 && month == 0 && day == 0 && hour == 0 && minute == 0
        && second == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Vous devez entrer un ajustement avec cette commande, svp:\n");
            printf ("  Valeur d'ajustement (-1, 1, +1, etc...)\n");
            printf ("  Elément modifié:\n");
            printf ("    a ou y: année\n");
            printf ("    m:      mois\n");
            printf ("    j ou d: jour\n");
            printf ("    h:      heure\n");
            printf ("    mn:     minute\n");
            printf ("    s:      seconde\n");
            printf ("  <exemple> timeadd nomtest +1m-2mn1s-6y\n");
            printf
                ("            Cette exemple ajoute 1 mois et 1 seconde, et soustrait 2 minutes\n");
            printf ("            et 6 ans dans le même temps.\n");
            ladmin_log
                ("Aucun ajustement n'est pas un ajustement (commande 'timeadd')."
                 RETCODE);
        }
        else
        {
            printf ("Please give an adjustment with this command:\n");
            printf ("  Adjustment value (-1, 1, +1, etc...)\n");
            printf ("  Modified element:\n");
            printf ("    a or y: year\n");
            printf ("    m:      month\n");
            printf ("    j or d: day\n");
            printf ("    h:      hour\n");
            printf ("    mn:     minute\n");
            printf ("    s:      second\n");
            printf ("  <example> timeadd testname +1m-2mn1s-6y\n");
            printf
                ("            this example adds 1 month and 1 second, and substracts 2 minutes\n");
            printf ("            and 6 years at the same time.\n");
            ladmin_log
                ("No adjustment isn't an adjustment ('timeadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (year > 127 || year < -127)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement d'années correct (de -127 à 127), svp.\n");
            ladmin_log
                ("Ajustement de l'année hors norme ('timeadd' command)."
                 RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the years (from -127 to 127).\n");
            ladmin_log
                ("Abnormal adjustement for the year ('timeadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (month > 255 || month < -255)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement de mois correct (de -255 à 255), svp.\n");
            ladmin_log ("Ajustement du mois hors norme ('timeadd' command)."
                        RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the months (from -255 to 255).\n");
            ladmin_log
                ("Abnormal adjustement for the month ('timeadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (day > 32767 || day < -32767)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement de jours correct (de -32767 à 32767), svp.\n");
            ladmin_log ("Ajustement des jours hors norme ('timeadd' command)."
                        RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the days (from -32767 to 32767).\n");
            ladmin_log
                ("Abnormal adjustement for the days ('timeadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (hour > 32767 || hour < -32767)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement d'heures correct (de -32767 à 32767), svp.\n");
            ladmin_log
                ("Ajustement des heures hors norme ('timeadd' command)."
                 RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the hours (from -32767 to 32767).\n");
            ladmin_log
                ("Abnormal adjustement for the hours ('timeadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (minute > 32767 || minute < -32767)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement de minutes correct (de -32767 à 32767), svp.\n");
            ladmin_log
                ("Ajustement des minutes hors norme ('timeadd' command)."
                 RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the minutes (from -32767 to 32767).\n");
            ladmin_log
                ("Abnormal adjustement for the minutes ('timeadd' command)."
                 RETCODE);
        }
        return 137;
    }
    if (second > 32767 || second < -32767)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez un ajustement de secondes correct (de -32767 à 32767), svp.\n");
            ladmin_log
                ("Ajustement des secondes hors norme ('timeadd' command)."
                 RETCODE);
        }
        else
        {
            printf
                ("Please give a correct adjustment for the seconds (from -32767 to 32767).\n");
            ladmin_log
                ("Abnormal adjustement for the seconds ('timeadd' command)."
                 RETCODE);
        }
        return 137;
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour modifier une date limite d'utilisation."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to modify a time limit."
                    RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7950;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    WFIFOW (login_fd, 26) = (short) year;
    WFIFOW (login_fd, 28) = (short) month;
    WFIFOW (login_fd, 30) = (short) day;
    WFIFOW (login_fd, 32) = (short) hour;
    WFIFOW (login_fd, 34) = (short) minute;
    WFIFOW (login_fd, 36) = (short) second;
    WFIFOSET (login_fd, 38);
    bytes_to_read = 1;

    return 0;
}

//-------------------------------------------------
// Sub-function: Set a validity limit of an account
//-------------------------------------------------
int timesetaccount (char *param)
{
    char name[1023], date[1023], time[1023];
    int  year, month, day, hour, minute, second;
    time_t connect_until_time;  // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited)
    struct tm *tmtime;

    memset (name, '\0', sizeof (name));
    memset (date, '\0', sizeof (date));
    memset (time, '\0', sizeof (time));
    year = month = day = hour = minute = second = 0;
    connect_until_time = 0;
    tmtime = localtime (&connect_until_time);   // initialize

    if (sscanf (param, "\"%[^\"]\" %s %[^\r\n]", name, date, time) < 2 &&   // if date = 0, time can be void
        sscanf (param, "'%[^']' %s %[^\r\n]", name, date, time) < 2 &&  // if date = 0, time can be void
        sscanf (param, "%s %s %[^\r\n]", name, date, time) < 2)
    {                           // if date = 0, time can be void
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte, une date et une heure svp.\n");
            printf
                ("<exemple>: timeset <nom_du_compte> aaaa/mm/jj [hh:mm:ss]\n");
            printf
                ("           timeset <nom_du_compte> 0    (0 = illimité)\n");
            printf ("           Heure par défaut [hh:mm:ss]: 23:59:59.\n");
            ladmin_log
                ("Nombre incorrect de paramètres pour fixer une date limite d'utilisation (commande 'timeset')."
                 RETCODE);
        }
        else
        {
            printf ("Please input an account name, a date and a hour.\n");
            printf
                ("<example>: timeset <account_name> yyyy/mm/dd [hh:mm:ss]\n");
            printf
                ("           timeset <account_name> 0   (0 = unlimited)\n");
            printf ("           Default time [hh:mm:ss]: 23:59:59.\n");
            ladmin_log
                ("Incomplete parameters to set a limit time ('timeset' command)."
                 RETCODE);
        }
        return 136;
    }
    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    if (time[0] == '\0')
        strcpy (time, "23:59:59");

    if (atoi (date) != 0 &&
        ((sscanf (date, "%d/%d/%d", &year, &month, &day) < 3 &&
          sscanf (date, "%d-%d-%d", &year, &month, &day) < 3 &&
          sscanf (date, "%d.%d.%d", &year, &month, &day) < 3 &&
          sscanf (date, "%d'%d'%d", &year, &month, &day) < 3) ||
         sscanf (time, "%d:%d:%d", &hour, &minute, &second) < 3))
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Entrez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n");
            ladmin_log
                ("Format incorrect pour la date/heure ('timeset' command)."
                 RETCODE);
        }
        else
        {
            printf
                ("Please input 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n");
            ladmin_log
                ("Invalid format for the date/time ('timeset' command)."
                 RETCODE);
        }
        return 102;
    }

    if (atoi (date) == 0)
    {
        connect_until_time = 0;
    }
    else
    {
        if (year < 70)
        {
            year = year + 100;
        }
        if (year >= 1900)
        {
            year = year - 1900;
        }
        if (month < 1 || month > 12)
        {
            if (defaultlanguage == 'F')
            {
                printf ("Entrez un mois correct svp (entre 1 et 12).\n");
                ladmin_log ("Mois incorrect pour la date ('timeset' command)."
                            RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for the month (from 1 to 12).\n");
                ladmin_log ("Invalid month for the date ('timeset' command)."
                            RETCODE);
            }
            return 102;
        }
        month = month - 1;
        if (day < 1 || day > 31)
        {
            if (defaultlanguage == 'F')
            {
                printf ("Entrez un jour correct svp (entre 1 et 31).\n");
                ladmin_log ("Jour incorrect pour la date ('timeset' command)."
                            RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for the day (from 1 to 31).\n");
                ladmin_log ("Invalid day for the date ('timeset' command)."
                            RETCODE);
            }
            return 102;
        }
        if (((month == 3 || month == 5 || month == 8 || month == 10)
             && day > 30) || (month == 1 && day > 29))
        {
            if (defaultlanguage == 'F')
            {
                printf
                    ("Entrez un jour correct en fonction du mois (%d) svp.\n",
                     month);
                ladmin_log
                    ("Jour incorrect pour ce mois correspondant ('timeset' command)."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for a day of this month (%d).\n",
                     month);
                ladmin_log ("Invalid day for this month ('timeset' command)."
                            RETCODE);
            }
            return 102;
        }
        if (hour < 0 || hour > 23)
        {
            if (defaultlanguage == 'F')
            {
                printf ("Entrez une heure correcte svp (entre 0 et 23).\n");
                ladmin_log
                    ("Heure incorrecte pour l'heure ('timeset' command)."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for the hour (from 0 to 23).\n");
                ladmin_log ("Invalid hour for the time ('timeset' command)."
                            RETCODE);
            }
            return 102;
        }
        if (minute < 0 || minute > 59)
        {
            if (defaultlanguage == 'F')
            {
                printf
                    ("Entrez des minutes correctes svp (entre 0 et 59).\n");
                ladmin_log
                    ("Minute incorrecte pour l'heure ('timeset' command)."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for the minutes (from 0 to 59).\n");
                ladmin_log ("Invalid minute for the time ('timeset' command)."
                            RETCODE);
            }
            return 102;
        }
        if (second < 0 || second > 59)
        {
            if (defaultlanguage == 'F')
            {
                printf
                    ("Entrez des secondes correctes svp (entre 0 et 59).\n");
                ladmin_log
                    ("Seconde incorrecte pour l'heure ('timeset' command)."
                     RETCODE);
            }
            else
            {
                printf
                    ("Please give a correct value for the seconds (from 0 to 59).\n");
                ladmin_log ("Invalid second for the time ('timeset' command)."
                            RETCODE);
            }
            return 102;
        }
        tmtime->tm_year = year;
        tmtime->tm_mon = month;
        tmtime->tm_mday = day;
        tmtime->tm_hour = hour;
        tmtime->tm_min = minute;
        tmtime->tm_sec = second;
        tmtime->tm_isdst = -1;  // -1: no winter/summer time modification
        connect_until_time = timegm (tmtime);
        if (connect_until_time == -1)
        {
            if (defaultlanguage == 'F')
            {
                printf ("Date incorrecte.\n");
                printf
                    ("Ajoutez 0 ou une date et une heure svp (format: 0 ou aaaa/mm/jj hh:mm:ss).\n");
                ladmin_log ("Date incorrecte. ('timeset' command)." RETCODE);
            }
            else
            {
                printf ("Invalid date.\n");
                printf
                    ("Please add 0 or a date and a time (format: 0 or yyyy/mm/dd hh:mm:ss).\n");
                ladmin_log ("Invalid date. ('timeset' command)." RETCODE);
            }
            return 102;
        }
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour fixer une date limite d'utilisation."
             RETCODE);
    }
    else
    {
        ladmin_log ("Request to login-server to set a time limit." RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7948;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    WFIFOL (login_fd, 26) = (int) connect_until_time;
    WFIFOSET (login_fd, 30);
    bytes_to_read = 1;

    return 0;
}

//------------------------------------------------------------------------------
// Sub-function: Asking to displaying information about an account (by its name)
//------------------------------------------------------------------------------
int whoaccount (char *param)
{
    char name[1023];

    memset (name, '\0', sizeof (name));

    if (strlen (param) == 0 ||
        (sscanf (param, "\"%[^\"]\"", name) < 1 &&
         sscanf (param, "'%[^']'", name) < 1 &&
         sscanf (param, "%[^\r\n]", name) < 1) || strlen (name) == 0)
    {
        if (defaultlanguage == 'F')
        {
            printf ("Entrez un nom de compte svp.\n");
            printf ("<exemple> who nomtest\n");
            ladmin_log ("Aucun nom n'a été donné pour trouver le compte."
                        RETCODE);
        }
        else
        {
            printf ("Please input an account name.\n");
            printf ("<example> who testname\n");
            ladmin_log ("No name was given to found the account." RETCODE);
        }
        return 136;
    }
    if (verify_accountname (name) == 0)
    {
        return 102;
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour obtenir le information d'un compte (par le nom)."
             RETCODE);
    }
    else
    {
        ladmin_log
            ("Request to login-server to obtain information about an account (by its name)."
             RETCODE);
    }

    WFIFOW (login_fd, 0) = 0x7952;
    memcpy (WFIFOP (login_fd, 2), name, 24);
    WFIFOSET (login_fd, 26);
    bytes_to_read = 1;

    return 0;
}

//--------------------------------------------------------
// Sub-function: Asking of the version of the login-server
//--------------------------------------------------------
int checkloginversion ()
{
    if (defaultlanguage == 'F')
        ladmin_log
            ("Envoi d'un requête au serveur de logins pour obtenir sa version."
             RETCODE);
    else
        ladmin_log ("Request to login-server to obtain its version." RETCODE);

    WFIFOW (login_fd, 0) = 0x7530;
    WFIFOSET (login_fd, 2);
    bytes_to_read = 1;

    return 0;
}

//---------------------------------------------
// Prompt function
// this function wait until user type a command
// and analyse the command.
//---------------------------------------------
int prompt ()
{
    int  i, j;
    char buf[1024];
    char *p;

    // while we don't wait new packets
    while (bytes_to_read == 0)
    {
        // for help with the console colors look here:
        // http://www.edoceo.com/liberum/?doc=printf-with-color
        // some code explanation (used here):
        // \033[2J : clear screen and go up/left (0, 0 position)
        // \033[K  : clear line from actual position to end of the line
        // \033[0m : reset color parameter
        // \033[1m : use bold for font
        Iprintf ("\n");
        if (defaultlanguage == 'F')
        {
            Iprintf
                ("\033[32mPour afficher les commandes, tapez 'Entrée'.\033[0m\n");
        }
        else
            Iprintf ("\033[32mTo list the commands, type 'enter'.\033[0m\n");
        Iprintf ("\033[0;36mLadmin-> \033[0m");
        Iprintf ("\033[1m");
        fflush (stdout);

        // get command and parameter
        memset (buf, '\0', sizeof (buf));
        fflush (stdin);
        if (!fgets (buf, 1023, stdin))
            exit (0);
        buf[1023] = '\0';

        Iprintf ("\033[0m");
        fflush (stdout);

        if (!eathena_interactive_session && !strlen (buf))
            exit (0);

        // remove final \n
        if ((p = strrchr (buf, '\n')) != NULL)
            p[0] = '\0';
        // remove all control char
        for (i = 0; buf[i]; i++)
            if (buf[i] < 32)
            {
                // remove cursor control.
                if (buf[i] == 27 && buf[i + 1] == '[' && (buf[i + 2] == 'H' ||  // home position (cursor)
                                                          buf[i + 2] == 'J' ||  // clear screen
                                                          buf[i + 2] == 'A' ||  // up 1 line
                                                          buf[i + 2] == 'B' ||  // down 1 line
                                                          buf[i + 2] == 'C' ||  // right 1 position
                                                          buf[i + 2] == 'D' ||  // left 1 position
                                                          buf[i + 2] == 'G'))
                {               // center cursor (windows)
                    for (j = i; buf[j]; j++)
                        buf[j] = buf[j + 3];
                }
                else if (buf[i] == 27 && buf[i + 1] == '['
                         && buf[i + 2] == '2' && buf[i + 3] == 'J')
                {               // clear screen
                    for (j = i; buf[j]; j++)
                        buf[j] = buf[j + 4];
                }
                else if (buf[i] == 27 && buf[i + 1] == '[' && buf[i + 3] == '~' && (buf[i + 2] == '1' ||    // home (windows)
                                                                                    buf[i + 2] == '2' ||    // insert (windows)
                                                                                    buf[i + 2] == '3' ||    // del (windows)
                                                                                    buf[i + 2] == '4' ||    // end (windows)
                                                                                    buf[i + 2] == '5' ||    // pgup (windows)
                                                                                    buf
                                                                                    [i
                                                                                     +
                                                                                     2]
                                                                                    ==
                                                                                    '6'))
                {               // pgdown (windows)
                    for (j = i; buf[j]; j++)
                        buf[j] = buf[j + 4];
                }
                else
                {
                    // remove other control char.
                    for (j = i; buf[j]; j++)
                        buf[j] = buf[j + 1];
                }
                i--;
            }

        // extract command name and parameters
        memset (command, '\0', sizeof (command));
        memset (parameters, '\0', sizeof (parameters));
        sscanf (buf, "%1023s %[^\n]", command, parameters);
        command[1023] = '\0';
        parameters[1023] = '\0';

        // lowercase for command line
        for (i = 0; command[i]; i++)
            command[i] = tolower (command[i]);

        if (command[0] == '?' || strlen (command) == 0)
        {
            if (defaultlanguage == 'F')
            {
                strcpy (buf, "aide");
                strcpy (command, "aide");
            }
            else
            {
                strcpy (buf, "help");
                strcpy (command, "help");
            }
        }

        // Analyse of the command
        check_command (command);    // give complete name to the command

        if (strlen (parameters) == 0)
        {
            if (defaultlanguage == 'F')
            {
                ladmin_log ("Commande: '%s' (sans paramètre)" RETCODE,
                            command, parameters);
            }
            else
            {
                ladmin_log ("Command: '%s' (without parameters)" RETCODE,
                            command, parameters);
            }
        }
        else
        {
            if (defaultlanguage == 'F')
            {
                ladmin_log ("Commande: '%s', paramètres: '%s'" RETCODE,
                            command, parameters);
            }
            else
            {
                ladmin_log ("Command: '%s', parameters: '%s'" RETCODE,
                            command, parameters);
            }
        }

        // Analyse of the command
// help
        if (strcmp (command, "aide") == 0)
        {
            display_help (parameters, 1);   // 1: french
        }
        else if (strcmp (command, "help") == 0)
        {
            display_help (parameters, 0);   // 0: english
// general commands
        }
        else if (strcmp (command, "add") == 0)
        {
            addaccount (parameters, 0); // 0: no email
        }
        else if (strcmp (command, "ban") == 0)
        {
            banaccount (parameters);
        }
        else if (strcmp (command, "banadd") == 0)
        {
            banaddaccount (parameters);
        }
        else if (strcmp (command, "banset") == 0)
        {
            bansetaccount (parameters);
        }
        else if (strcmp (command, "block") == 0)
        {
            blockaccount (parameters);
        }
        else if (strcmp (command, "check") == 0)
        {
            checkaccount (parameters);
        }
        else if (strcmp (command, "create") == 0)
        {
            addaccount (parameters, 1); // 1: with email
        }
        else if (strcmp (command, "delete") == 0)
        {
            delaccount (parameters);
        }
        else if (strcmp (command, "email") == 0)
        {
            changeemail (parameters);
        }
        else if (strcmp (command, "getcount") == 0)
        {
            getlogincount ();
        }
        else if (strcmp (command, "gm") == 0)
        {
            changegmlevel (parameters);
        }
        else if (strcmp (command, "id") == 0)
        {
            idaccount (parameters);
        }
        else if (strcmp (command, "info") == 0)
        {
            infoaccount (atoi (parameters));
        }
        else if (strcmp (command, "kami") == 0)
        {
            sendbroadcast (0, parameters);  // flag for normal
        }
        else if (strcmp (command, "kamib") == 0)
        {
            sendbroadcast (0x10, parameters);   // flag for blue
        }
        else if (strcmp (command, "language") == 0)
        {
            changelanguage (parameters);
        }
        else if (strcmp (command, "itemfrob") == 0)
        {
            itemfrob (parameters);  // 0: to list all
        }
        else if (strcmp (command, "list") == 0)
        {
            listaccount (parameters, 0);    // 0: to list all
        }
        else if (strcmp (command, "listban") == 0)
        {
            listaccount (parameters, 3);    // 3: to list only accounts with state or bannished
        }
        else if (strcmp (command, "listgm") == 0)
        {
            listaccount (parameters, 1);    // 1: to list only GM
        }
        else if (strcmp (command, "listok") == 0)
        {
            listaccount (parameters, 4);    // 4: to list only accounts without state and not bannished
        }
        else if (strcmp (command, "memo") == 0)
        {
            changememo (parameters);
        }
        else if (strcmp (command, "name") == 0)
        {
            nameaccount (atoi (parameters));
        }
        else if (strcmp (command, "password") == 0)
        {
            changepasswd (parameters);
        }
        else if (strcmp (command, "reloadgm") == 0)
        {
            reloadGM ();
        }
        else if (strcmp (command, "search") == 0)
        {                       // no regex in C version
            listaccount (parameters, 2);    // 2: to list with pattern
        }
        else if (strcmp (command, "sex") == 0)
        {
            changesex (parameters);
        }
        else if (strcmp (command, "state") == 0)
        {
            changestate (parameters);
        }
        else if (strcmp (command, "timeadd") == 0)
        {
            timeaddaccount (parameters);
        }
        else if (strcmp (command, "timeset") == 0)
        {
            timesetaccount (parameters);
        }
        else if (strcmp (command, "unban") == 0)
        {
            unbanaccount (parameters);
        }
        else if (strcmp (command, "unblock") == 0)
        {
            unblockaccount (parameters);
        }
        else if (strcmp (command, "version") == 0)
        {
            checkloginversion ();
        }
        else if (strcmp (command, "who") == 0)
        {
            whoaccount (parameters);
// quit
        }
        else if (strcmp (command, "quit") == 0 ||
                 strcmp (command, "exit") == 0 ||
                 strcmp (command, "end") == 0)
        {
            if (defaultlanguage == 'F')
            {
                printf ("Au revoir.\n");
            }
            else
            {
                printf ("Bye.\n");
            }
            exit (0);
// unknown command
        }
        else
        {
            if (defaultlanguage == 'F')
            {
                printf ("Commande inconnue [%s].\n", buf);
                ladmin_log ("Commande inconnue [%s]." RETCODE, buf);
            }
            else
            {
                printf ("Unknown command [%s].\n", buf);
                ladmin_log ("Unknown command [%s]." RETCODE, buf);
            }
        }
    }

    return 0;
}

//-------------------------------------------------------------
// Function: Parse receiving informations from the login-server
//-------------------------------------------------------------
int parse_fromlogin (int fd)
{
    struct char_session_data *sd;

    if (session[fd]->eof)
    {
        if (defaultlanguage == 'F')
        {
            printf
                ("Impossible de se connecter au serveur de login [%s:%d] !\n",
                 loginserverip, loginserverport);
            ladmin_log
                ("Impossible de se connecter au serveur de login [%s:%d] !"
                 RETCODE, loginserverip, loginserverport);
        }
        else
        {
            printf
                ("Impossible to have a connection with the login-server [%s:%d] !\n",
                 loginserverip, loginserverport);
            ladmin_log
                ("Impossible to have a connection with the login-server [%s:%d] !"
                 RETCODE, loginserverip, loginserverport);
        }
        close (fd);
        delete_session (fd);
        exit (0);
    }

//  printf("parse_fromlogin : %d %d %d\n", fd, RFIFOREST(fd), RFIFOW(fd,0));
    sd = session[fd]->session_data;

    while (RFIFOREST (fd) >= 2)
    {
        switch (RFIFOW (fd, 0))
        {
            case 0x7919:       // answer of a connection request
                if (RFIFOREST (fd) < 3)
                    return 0;
                if (RFIFOB (fd, 2) != 0)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf ("Erreur de login:\n");
                        printf (" - mot de passe incorrect,\n");
                        printf
                            (" - système d'administration non activé, ou\n");
                        printf (" - IP non autorisée.\n");
                        ladmin_log
                            ("Erreur de login: mot de passe incorrect, système d'administration non activé, ou IP non autorisée."
                             RETCODE);
                    }
                    else
                    {
                        printf ("Error at login:\n");
                        printf (" - incorrect password,\n");
                        printf
                            (" - administration system not activated, or\n");
                        printf (" - unauthorised IP.\n");
                        ladmin_log
                            ("Error at login: incorrect password, administration system not activated, or unauthorised IP."
                             RETCODE);
                    }
                    session[fd]->eof = 1;
                    //bytes_to_read = 1; // not stop at prompt
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf ("Connexion établie.\n");
                        ladmin_log ("Connexion établie." RETCODE);
                        printf
                            ("Lecture de la version du serveur de login...\n");
                        ladmin_log
                            ("Lecture de la version du serveur de login..."
                             RETCODE);
                    }
                    else
                    {
                        Iprintf ("Established connection.\n");
                        ladmin_log ("Established connection." RETCODE);
                        Iprintf
                            ("Reading of the version of the login-server...\n");
                        ladmin_log
                            ("Reading of the version of the login-server..."
                             RETCODE);
                    }
                    //bytes_to_read = 1; // unchanged
                    checkloginversion ();
                }
                RFIFOSKIP (fd, 3);
                break;

#ifdef PASSWORDENC
            case 0x01dc:       // answer of a coding key request
                if (RFIFOREST (fd) < 4 || RFIFOREST (fd) < RFIFOW (fd, 2))
                    return 0;
                {
                    char md5str[64] =
                        "", md5bin[32], md5key[RFIFOW (fd, 2) - 4 + 1];
                    memcpy (md5key, RFIFOP (fd, 4), RFIFOW (fd, 2) - 4);
                    md5key[sizeof (md5key) - 1] = '0';
                    if (passenc == 1)
                    {
                        strncpy (md5str, RFIFOP (fd, 4), RFIFOW (fd, 2) - 4);
                        strcat (md5str, loginserveradminpassword);
                    }
                    else if (passenc == 2)
                    {
                        strncpy (md5str, loginserveradminpassword,
                                 sizeof (loginserveradminpassword));
                        strcat (md5str, RFIFOP (fd, 4));
                    }
                    MD5_String2binary (md5str, md5bin);
                    WFIFOW (login_fd, 0) = 0x7918;  // Request for administation login (encrypted password)
                    WFIFOW (login_fd, 2) = passenc; // Encrypted type
                    memcpy (WFIFOP (login_fd, 4), md5bin, 16);
                    WFIFOSET (login_fd, 20);
                    if (defaultlanguage == 'F')
                    {
                        Iprintf ("Réception de la clef MD5.\n");
                        ladmin_log ("Réception de la clef MD5." RETCODE);
                        Iprintf ("Envoi du mot de passe crypté...\n");
                        ladmin_log ("Envoi du mot de passe crypté..."
                                    RETCODE);
                    }
                    else
                    {
                        Iprintf ("Receiving of the MD5 key.\n");
                        ladmin_log ("Receiving of the MD5 key." RETCODE);
                        Iprintf ("Sending of the encrypted password...\n");
                        ladmin_log ("Sending of the encrypted password..."
                                    RETCODE);
                    }
                }
                bytes_to_read = 1;
                RFIFOSKIP (fd, RFIFOW (fd, 2));
                break;
#endif

            case 0x7531:       // Displaying of the version of the login-server
                if (RFIFOREST (fd) < 10)
                    return 0;
                Iprintf ("  Login-Server [%s:%d]\n", loginserverip,
                         loginserverport);
                if (((int) RFIFOB (login_fd, 5)) == 0)
                {
                    Iprintf ("  eAthena version stable-%d.%d",
                             (int) RFIFOB (login_fd, 2),
                             (int) RFIFOB (login_fd, 3));
                }
                else
                {
                    Iprintf ("  eAthena version dev-%d.%d",
                             (int) RFIFOB (login_fd, 2),
                             (int) RFIFOB (login_fd, 3));
                }
                if (((int) RFIFOB (login_fd, 4)) == 0)
                    Iprintf (" revision %d", (int) RFIFOB (login_fd, 4));
                if (((int) RFIFOB (login_fd, 6)) == 0)
                {
                    Iprintf ("%d.\n", RFIFOW (login_fd, 8));
                }
                else
                    Iprintf ("-mod%d.\n", RFIFOW (login_fd, 8));
                bytes_to_read = 0;
                RFIFOSKIP (fd, 10);
                break;

            case 0x7925:       // Itemfrob-OK
                RFIFOSKIP (fd, 2);
                bytes_to_read = 0;
                break;

            case 0x7921:       // Displaying of the list of accounts
                if (RFIFOREST (fd) < 4 || RFIFOREST (fd) < RFIFOW (fd, 2))
                    return 0;
                if (RFIFOW (fd, 2) < 5)
                {
                    if (defaultlanguage == 'F')
                    {
                        ladmin_log
                            ("  Réception d'une liste des comptes vide."
                             RETCODE);
                        if (list_count == 0)
                            printf ("Aucun compte trouvé.\n");
                        else if (list_count == 1)
                            printf ("1 compte trouvé.\n");
                        else
                            printf ("%d comptes trouvés.\n", list_count);
                    }
                    else
                    {
                        ladmin_log ("  Receiving of a void accounts list."
                                    RETCODE);
                        if (list_count == 0)
                        {
                            Iprintf ("No account found.\n");
                        }
                        else if (list_count == 1)
                        {
                            Iprintf ("1 account found.\n");
                        }
                        else
                            Iprintf ("%d accounts found.\n", list_count);
                    }
                    bytes_to_read = 0;
                }
                else
                {
                    int  i;
                    if (defaultlanguage == 'F')
                        ladmin_log ("  Réception d'une liste des comptes."
                                    RETCODE);
                    else
                        ladmin_log ("  Receiving of a accounts list."
                                    RETCODE);
                    for (i = 4; i < RFIFOW (fd, 2); i += 38)
                    {
                        int  j;
                        char userid[24];
                        char lower_userid[24];
                        memcpy (userid, RFIFOP (fd, i + 5), sizeof (userid));
                        userid[sizeof (userid) - 1] = '\0';
                        memset (lower_userid, '\0', sizeof (lower_userid));
                        for (j = 0; userid[j]; j++)
                            lower_userid[j] = tolower (userid[j]);
                        list_first = RFIFOL (fd, i) + 1;
                        // here are checks...
                        if (list_type == 0 ||
                            (list_type == 1 && RFIFOB (fd, i + 4) > 0) ||
                            (list_type == 2
                             && strstr (lower_userid, parameters) != NULL)
                            || (list_type == 3 && RFIFOL (fd, i + 34) != 0)
                            || (list_type == 4 && RFIFOL (fd, i + 34) == 0))
                        {
                            printf ("%10d ", RFIFOL (fd, i));
                            if (RFIFOB (fd, i + 4) == 0)
                                printf ("   ");
                            else
                                printf ("%2d ", (int) RFIFOB (fd, i + 4));
                            printf ("%-24s", userid);
                            if (defaultlanguage == 'F')
                            {
                                if (RFIFOB (fd, i + 29) == 0)
                                    printf ("%-5s ", "Femme");
                                else if (RFIFOB (fd, i + 29) == 1)
                                    printf ("%-5s ", "Male");
                                else
                                    printf ("%-5s ", "Servr");
                            }
                            else
                            {
                                if (RFIFOB (fd, i + 29) == 0)
                                    printf ("%-5s ", "Femal");
                                else if (RFIFOB (fd, i + 29) == 1)
                                    printf ("%-5s ", "Male");
                                else
                                    printf ("%-5s ", "Servr");
                            }
                            printf ("%6d ", RFIFOL (fd, i + 30));
                            switch (RFIFOL (fd, i + 34))
                            {
                                case 0:
                                    if (defaultlanguage == 'F')
                                        printf ("%-27s\n", "Compte Ok");
                                    else
                                        printf ("%-27s\n", "Account OK");
                                    break;
                                case 1:
                                    printf ("%-27s\n", "Unregistered ID");
                                    break;
                                case 2:
                                    printf ("%-27s\n", "Incorrect Password");
                                    break;
                                case 3:
                                    printf ("%-27s\n", "This ID is expired");
                                    break;
                                case 4:
                                    printf ("%-27s\n",
                                            "Rejected from Server");
                                    break;
                                case 5:
                                    printf ("%-27s\n", "Blocked by the GM Team");   // You have been blocked by the GM Team
                                    break;
                                case 6:
                                    printf ("%-27s\n", "Your EXE file is too old"); // Your Game's EXE file is not the latest version
                                    break;
                                case 7:
                                    printf ("%-27s\n", "Banishement or");
                                    printf ("                                                   Prohibited to login until...\n");   // You are Prohibited to log in until %s
                                    break;
                                case 8:
                                    printf ("%-27s\n",
                                            "Server is over populated");
                                    break;
                                case 9:
                                    printf ("%-27s\n", "No MSG");
                                    break;
                                default:   // 100
                                    printf ("%-27s\n", "This ID is totally erased");    // This ID has been totally erased
                                    break;
                            }
                            list_count++;
                        }
                    }
                    // asking of the following acounts
                    if (defaultlanguage == 'F')
                        ladmin_log
                            ("Envoi d'un requête au serveur de logins pour obtenir la liste des comptes de %d à %d (complément)."
                             RETCODE, list_first, list_last);
                    else
                        ladmin_log
                            ("Request to login-server to obtain the list of accounts from %d to %d (complement)."
                             RETCODE, list_first, list_last);
                    WFIFOW (login_fd, 0) = 0x7920;
                    WFIFOL (login_fd, 2) = list_first;
                    WFIFOL (login_fd, 6) = list_last;
                    WFIFOSET (login_fd, 10);
                    bytes_to_read = 1;
                }
                RFIFOSKIP (fd, RFIFOW (fd, 2));
                break;

            case 0x7931:       // Answer of login-server about an account creation
                if (RFIFOREST (fd) < 30)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec à la création du compte [%s]. Un compte identique existe déjà.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Echec à la création du compte [%s]. Un compte identique existe déjà."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf
                            ("Account [%s] creation failed. Same account already exists.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Account [%s] creation failed. Same account already exists."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf ("Compte [%s] créé avec succès [id: %d].\n",
                                RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log ("Compte [%s] créé avec succès [id: %d]."
                                    RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                    else
                    {
                        printf
                            ("Account [%s] is successfully created [id: %d].\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Account [%s] is successfully created [id: %d]."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 30);
                break;

            case 0x7933:       // Answer of login-server about an account deletion
                if (RFIFOREST (fd) < 30)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec de la suppression du compte [%s]. Le compte n'existe pas.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Echec de la suppression du compte [%s]. Le compte n'existe pas."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf
                            ("Account [%s] deletion failed. Account doesn't exist.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Account [%s] deletion failed. Account doesn't exist."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf ("Compte [%s][id: %d] SUPPRIME avec succès.\n",
                                RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Compte [%s][id: %d] SUPPRIME avec succès."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                    else
                    {
                        printf
                            ("Account [%s][id: %d] is successfully DELETED.\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Account [%s][id: %d] is successfully DELETED."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 30);
                break;

            case 0x7935:       // answer of the change of an account password
                if (RFIFOREST (fd) < 30)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec de la modification du mot de passe du compte [%s].\n",
                             RFIFOP (fd, 6));
                        printf ("Le compte [%s] n'existe pas.\n",
                                RFIFOP (fd, 6));
                        ladmin_log
                            ("Echec de la modification du mot de passe du compte. Le compte [%s] n'existe pas."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf ("Account [%s] password changing failed.\n",
                                RFIFOP (fd, 6));
                        printf ("Account [%s] doesn't exist.\n",
                                RFIFOP (fd, 6));
                        ladmin_log
                            ("Account password changing failed. The compte [%s] doesn't exist."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Modification du mot de passe du compte [%s][id: %d] réussie.\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Modification du mot de passe du compte [%s][id: %d] réussie."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                    else
                    {
                        printf
                            ("Account [%s][id: %d] password successfully changed.\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Account [%s][id: %d] password successfully changed."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 30);
                break;

            case 0x7937:       // answer of the change of an account state
                if (RFIFOREST (fd) < 34)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec du changement du statut du compte [%s]. Le compte n'existe pas.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Echec du changement du statut du compte [%s]. Le compte n'existe pas."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf
                            ("Account [%s] state changing failed. Account doesn't exist.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Account [%s] state changing failed. Account doesn't exist."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    char tmpstr[256];
                    if (defaultlanguage == 'F')
                    {
                        sprintf (tmpstr,
                                 "Statut du compte [%s] changé avec succès en [",
                                 RFIFOP (fd, 6));
                    }
                    else
                    {
                        sprintf (tmpstr,
                                 "Account [%s] state successfully changed in [",
                                 RFIFOP (fd, 6));
                    }
                    switch (RFIFOL (fd, 30))
                    {
                        case 0:
                            if (defaultlanguage == 'F')
                                strcat (tmpstr, "0: Compte Ok");
                            else
                                strcat (tmpstr, "0: Account OK");
                            break;
                        case 1:
                            strcat (tmpstr, "1: Unregistered ID");
                            break;
                        case 2:
                            strcat (tmpstr, "2: Incorrect Password");
                            break;
                        case 3:
                            strcat (tmpstr, "3: This ID is expired");
                            break;
                        case 4:
                            strcat (tmpstr, "4: Rejected from Server");
                            break;
                        case 5:
                            strcat (tmpstr,
                                    "5: You have been blocked by the GM Team");
                            break;
                        case 6:
                            strcat (tmpstr,
                                    "6: [Your Game's EXE file is not the latest version");
                            break;
                        case 7:
                            strcat (tmpstr,
                                    "7: You are Prohibited to log in until...");
                            break;
                        case 8:
                            strcat (tmpstr,
                                    "8: Server is jammed due to over populated");
                            break;
                        case 9:
                            strcat (tmpstr, "9: No MSG");
                            break;
                        default:   // 100
                            strcat (tmpstr, "100: This ID is totally erased");
                            break;
                    }
                    strcat (tmpstr, "]");
                    printf ("%s\n", tmpstr);
                    ladmin_log ("%s%s", tmpstr, RETCODE);
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 34);
                break;

            case 0x7939:       // answer of the number of online players
                if (RFIFOREST (fd) < 4 || RFIFOREST (fd) < RFIFOW (fd, 2))
                    return 0;
                {
                    // Get length of the received packet
                    int  i;
                    char name[20];
                    if (defaultlanguage == 'F')
                    {
                        ladmin_log
                            ("  Réception du nombre de joueurs en ligne."
                             RETCODE);
                    }
                    else
                    {
                        ladmin_log
                            ("  Receiving of the number of online players."
                             RETCODE);
                    }
                    // Read information of the servers
                    if (RFIFOW (fd, 2) < 5)
                    {
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("  Aucun serveur n'est connecté au login serveur.\n");
                        }
                        else
                        {
                            printf
                                ("  No server is connected to the login-server.\n");
                        }
                    }
                    else
                    {
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("  Nombre de joueurs en ligne (serveur: nb):\n");
                        }
                        else
                        {
                            printf
                                ("  Number of online players (server: number).\n");
                        }
                        // Displaying of result
                        for (i = 4; i < RFIFOW (fd, 2); i += 32)
                        {
                            memcpy (name, RFIFOP (fd, i + 6), sizeof (name));
                            name[sizeof (name) - 1] = '\0';
                            printf ("    %-20s : %5d\n", name,
                                    RFIFOW (fd, i + 26));
                        }
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, RFIFOW (fd, 2));
                break;

            case 0x793b:       // answer of the check of a password
                if (RFIFOREST (fd) < 30)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Le compte [%s] n'existe pas ou le mot de passe est incorrect.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Le compte [%s] n'existe pas ou le mot de passe est incorrect."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf
                            ("The account [%s] doesn't exist or the password is incorrect.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("The account [%s] doesn't exist or the password is incorrect."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Le mot de passe donné correspond bien au compte [%s][id: %d].\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Le mot de passe donné correspond bien au compte [%s][id: %d]."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                    else
                    {
                        printf
                            ("The proposed password is correct for the account [%s][id: %d].\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("The proposed password is correct for the account [%s][id: %d]."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 30);
                break;

            case 0x793d:       // answer of the change of an account sex
                if (RFIFOREST (fd) < 30)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec de la modification du sexe du compte [%s].\n",
                             RFIFOP (fd, 6));
                        printf
                            ("Le compte [%s] n'existe pas ou le sexe est déjà celui demandé.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Echec de la modification du sexe du compte. Le compte [%s] n'existe pas ou le sexe est déjà celui demandé."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf ("Account [%s] sex changing failed.\n",
                                RFIFOP (fd, 6));
                        printf
                            ("Account [%s] doesn't exist or the sex is already the good sex.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Account sex changing failed. The compte [%s] doesn't exist or the sex is already the good sex."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Sexe du compte [%s][id: %d] changé avec succès.\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Sexe du compte [%s][id: %d] changé avec succès."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                    else
                    {
                        printf
                            ("Account [%s][id: %d] sex successfully changed.\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Account [%s][id: %d] sex successfully changed."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 30);
                break;

            case 0x793f:       // answer of the change of an account GM level
                if (RFIFOREST (fd) < 30)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec de la modification du niveau de GM du compte [%s].\n",
                             RFIFOP (fd, 6));
                        printf
                            ("Le compte [%s] n'existe pas, le niveau de GM est déjà celui demandé\n",
                             RFIFOP (fd, 6));
                        printf
                            ("ou il est impossible de modifier le fichier des comptes GM.\n");
                        ladmin_log
                            ("Echec de la modification du niveau de GM du compte. Le compte [%s] n'existe pas, le niveau de GM est déjà celui demandé ou il est impossible de modifier le fichier des comptes GM."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf ("Account [%s] GM level changing failed.\n",
                                RFIFOP (fd, 6));
                        printf
                            ("Account [%s] doesn't exist, the GM level is already the good GM level\n",
                             RFIFOP (fd, 6));
                        printf
                            ("or it's impossible to modify the GM accounts file.\n");
                        ladmin_log
                            ("Account GM level changing failed. The compte [%s] doesn't exist, the GM level is already the good sex or it's impossible to modify the GM accounts file."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Niveau de GM du compte [%s][id: %d] changé avec succès.\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Niveau de GM du compte [%s][id: %d] changé avec succès."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                    else
                    {
                        printf
                            ("Account [%s][id: %d] GM level successfully changed.\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Account [%s][id: %d] GM level successfully changed."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 30);
                break;

            case 0x7941:       // answer of the change of an account email
                if (RFIFOREST (fd) < 30)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec de la modification de l'e-mail du compte [%s].\n",
                             RFIFOP (fd, 6));
                        printf ("Le compte [%s] n'existe pas.\n",
                                RFIFOP (fd, 6));
                        ladmin_log
                            ("Echec de la modification de l'e-mail du compte. Le compte [%s] n'existe pas."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf ("Account [%s] e-mail changing failed.\n",
                                RFIFOP (fd, 6));
                        printf ("Account [%s] doesn't exist.\n",
                                RFIFOP (fd, 6));
                        ladmin_log
                            ("Account e-mail changing failed. The compte [%s] doesn't exist."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Modification de l'e-mail du compte [%s][id: %d] réussie.\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Modification de l'e-mail du compte [%s][id: %d] réussie."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                    else
                    {
                        printf
                            ("Account [%s][id: %d] e-mail successfully changed.\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Account [%s][id: %d] e-mail successfully changed."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 30);
                break;

            case 0x7943:       // answer of the change of an account memo
                if (RFIFOREST (fd) < 30)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec du changement du mémo du compte [%s]. Le compte n'existe pas.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Echec du changement du mémo du compte [%s]. Le compte n'existe pas."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf
                            ("Account [%s] memo changing failed. Account doesn't exist.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Account [%s] memo changing failed. Account doesn't exist."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Mémo du compte [%s][id: %d] changé avec succès.\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Mémo du compte [%s][id: %d] changé avec succès."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                    else
                    {
                        printf
                            ("Account [%s][id: %d] memo successfully changed.\n",
                             RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log
                            ("Account [%s][id: %d] memo successfully changed."
                             RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 30);
                break;

            case 0x7945:       // answer of an account id search
                if (RFIFOREST (fd) < 30)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Impossible de trouver l'id du compte [%s]. Le compte n'existe pas."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf
                            ("Unable to find the account [%s] id. Account doesn't exist.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Unable to find the account [%s] id. Account doesn't exist."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf ("Le compte [%s] a pour id: %d.\n",
                                RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log ("Le compte [%s] a pour id: %d." RETCODE,
                                    RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                    else
                    {
                        printf ("The account [%s] have the id: %d.\n",
                                RFIFOP (fd, 6), RFIFOL (fd, 2));
                        ladmin_log ("The account [%s] have the id: %d."
                                    RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 30);
                break;

            case 0x7947:       // answer of an account name search
                if (RFIFOREST (fd) < 30)
                    return 0;
                if (strcmp (RFIFOP (fd, 6), "") == 0)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas.\n",
                             RFIFOL (fd, 2));
                        ladmin_log
                            ("Impossible de trouver le nom du compte [%d]. Le compte n'existe pas."
                             RETCODE, RFIFOL (fd, 2));
                    }
                    else
                    {
                        printf
                            ("Unable to find the account [%d] name. Account doesn't exist.\n",
                             RFIFOL (fd, 2));
                        ladmin_log
                            ("Unable to find the account [%d] name. Account doesn't exist."
                             RETCODE, RFIFOL (fd, 2));
                    }
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf ("Le compte [id: %d] a pour nom: %s.\n",
                                RFIFOL (fd, 2), RFIFOP (fd, 6));
                        ladmin_log ("Le compte [id: %d] a pour nom: %s."
                                    RETCODE, RFIFOL (fd, 2), RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf ("The account [id: %d] have the name: %s.\n",
                                RFIFOL (fd, 2), RFIFOP (fd, 6));
                        ladmin_log ("The account [id: %d] have the name: %s."
                                    RETCODE, RFIFOL (fd, 2), RFIFOP (fd, 6));
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 30);
                break;

            case 0x7949:       // answer of an account validity limit set
                if (RFIFOREST (fd) < 34)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Echec du changement de la validité du compte [%s]. Le compte n'existe pas."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf
                            ("Account [%s] validity limit changing failed. Account doesn't exist.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Account [%s] validity limit changing failed. Account doesn't exist."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    time_t timestamp = RFIFOL (fd, 30);
                    if (timestamp == 0)
                    {
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("Limite de validité du compte [%s][id: %d] changée avec succès en [illimité].\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2));
                            ladmin_log
                                ("Limite de validité du compte [%s][id: %d] changée avec succès en [illimité]."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                        }
                        else
                        {
                            printf
                                ("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited].\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2));
                            ladmin_log
                                ("Validity Limit of the account [%s][id: %d] successfully changed to [unlimited]."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                        }
                    }
                    else
                    {
                        char tmpstr[128];
                        strftime (tmpstr, 24, date_format,
                                  localtime (&timestamp));
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2), tmpstr);
                            ladmin_log
                                ("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2),
                                 tmpstr);
                        }
                        else
                        {
                            printf
                                ("Validity Limit of the account [%s][id: %d] successfully changed to be until %s.\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2), tmpstr);
                            ladmin_log
                                ("Validity Limit of the account [%s][id: %d] successfully changed to be until %s."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2),
                                 tmpstr);
                        }
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 34);
                break;

            case 0x794b:       // answer of an account ban set
                if (RFIFOREST (fd) < 34)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf
                            ("Account [%s] final date of banishment changing failed. Account doesn't exist.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Account [%s] final date of banishment changing failed. Account doesn't exist."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    time_t timestamp = RFIFOL (fd, 30);
                    if (timestamp == 0)
                    {
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2));
                            ladmin_log
                                ("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie]."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                        }
                        else
                        {
                            printf
                                ("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2));
                            ladmin_log
                                ("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished]."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                        }
                    }
                    else
                    {
                        char tmpstr[128];
                        strftime (tmpstr, 24, date_format,
                                  localtime (&timestamp));
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2), tmpstr);
                            ladmin_log
                                ("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2),
                                 tmpstr);
                        }
                        else
                        {
                            printf
                                ("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2), tmpstr);
                            ladmin_log
                                ("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2),
                                 tmpstr);
                        }
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 34);
                break;

            case 0x794d:       // answer of an account ban date/time changing
                if (RFIFOREST (fd) < 34)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Echec du changement de la date finale de banissement du compte [%s]. Le compte n'existe pas."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf
                            ("Account [%s] final date of banishment changing failed. Account doesn't exist.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Account [%s] final date of banishment changing failed. Account doesn't exist."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    time_t timestamp = RFIFOL (fd, 30);
                    if (timestamp == 0)
                    {
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie].\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2));
                            ladmin_log
                                ("Date finale de banissement du compte [%s][id: %d] changée avec succès en [dé-bannie]."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                        }
                        else
                        {
                            printf
                                ("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished].\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2));
                            ladmin_log
                                ("Final date of banishment of the account [%s][id: %d] successfully changed to [unbanished]."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                        }
                    }
                    else
                    {
                        char tmpstr[128];
                        strftime (tmpstr, 24, date_format,
                                  localtime (&timestamp));
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2), tmpstr);
                            ladmin_log
                                ("Date finale de banissement du compte [%s][id: %d] changée avec succès pour être jusqu'au %s."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2),
                                 tmpstr);
                        }
                        else
                        {
                            printf
                                ("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s.\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2), tmpstr);
                            ladmin_log
                                ("Final date of banishment of the account [%s][id: %d] successfully changed to be until %s."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2),
                                 tmpstr);
                        }
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 34);
                break;

            case 0x794f:       // answer of a broadcast
                if (RFIFOREST (fd) < 4)
                    return 0;
                if (RFIFOW (fd, 2) == (unsigned short) -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec de l'envoi du message. Aucun server de char en ligne.\n");
                        ladmin_log
                            ("Echec de l'envoi du message. Aucun server de char en ligne."
                             RETCODE);
                    }
                    else
                    {
                        printf
                            ("Message sending failed. No online char-server.\n");
                        ladmin_log
                            ("Message sending failed. No online char-server."
                             RETCODE);
                    }
                }
                else
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Message transmis au server de logins avec succès.\n");
                        ladmin_log
                            ("Message transmis au server de logins avec succès."
                             RETCODE);
                    }
                    else
                    {
                        printf
                            ("Message successfully sended to login-server.\n");
                        ladmin_log
                            ("Message successfully sended to login-server."
                             RETCODE);
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 4);
                break;

            case 0x7951:       // answer of an account validity limit changing
                if (RFIFOREST (fd) < 34)
                    return 0;
                if (RFIFOL (fd, 2) == -1)
                {
                    if (defaultlanguage == 'F')
                    {
                        printf
                            ("Echec du changement de la validité du compte [%s]. Le compte n'existe pas.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Echec du changement de la validité du compte [%s]. Le compte n'existe pas."
                             RETCODE, RFIFOP (fd, 6));
                    }
                    else
                    {
                        printf
                            ("Account [%s] validity limit changing failed. Account doesn't exist.\n",
                             RFIFOP (fd, 6));
                        ladmin_log
                            ("Account [%s] validity limit changing failed. Account doesn't exist."
                             RETCODE, RFIFOP (fd, 6));
                    }
                }
                else
                {
                    time_t timestamp = RFIFOL (fd, 30);
                    if (timestamp == 0)
                    {
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("Limite de validité du compte [%s][id: %d] inchangée.\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2));
                            printf
                                ("Le compte a une validité illimitée ou\n");
                            printf
                                ("la modification est impossible avec les ajustements demandés.\n");
                            ladmin_log
                                ("Limite de validité du compte [%s][id: %d] inchangée. Le compte a une validité illimitée ou la modification est impossible avec les ajustements demandés."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                        }
                        else
                        {
                            printf
                                ("Validity limit of the account [%s][id: %d] unchanged.\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2));
                            printf
                                ("The account have an unlimited validity limit or\n");
                            printf
                                ("the changing is impossible with the proposed adjustments.\n");
                            ladmin_log
                                ("Validity limit of the account [%s][id: %d] unchanged. The account have an unlimited validity limit or the changing is impossible with the proposed adjustments."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2));
                        }
                    }
                    else
                    {
                        char tmpstr[128];
                        strftime (tmpstr, 24, date_format,
                                  localtime (&timestamp));
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s.\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2), tmpstr);
                            ladmin_log
                                ("Limite de validité du compte [%s][id: %d] changée avec succès pour être jusqu'au %s."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2),
                                 tmpstr);
                        }
                        else
                        {
                            printf
                                ("Validity limit of the account [%s][id: %d] successfully changed to be until %s.\n",
                                 RFIFOP (fd, 6), RFIFOL (fd, 2), tmpstr);
                            ladmin_log
                                ("Validity limit of the account [%s][id: %d] successfully changed to be until %s."
                                 RETCODE, RFIFOP (fd, 6), RFIFOL (fd, 2),
                                 tmpstr);
                        }
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 34);
                break;

            case 0x7953:       // answer of a request about informations of an account (by account name/id)
                if (RFIFOREST (fd) < 150
                    || RFIFOREST (fd) < (150 + RFIFOW (fd, 148)))
                    return 0;
                {
                    char userid[24], error_message[20], lastlogin[24],
                        last_ip[16], email[40], memo[255];
                    time_t ban_until_time;  // # of seconds 1/1/1970 (timestamp): ban time limit of the account (0 = no ban)
                    time_t connect_until_time;  // # of seconds 1/1/1970 (timestamp): Validity limit of the account (0 = unlimited)
                    memcpy (userid, RFIFOP (fd, 7), sizeof (userid));
                    userid[sizeof (userid) - 1] = '\0';
                    memcpy (error_message, RFIFOP (fd, 40),
                            sizeof (error_message));
                    error_message[sizeof (error_message) - 1] = '\0';
                    memcpy (lastlogin, RFIFOP (fd, 60), sizeof (lastlogin));
                    lastlogin[sizeof (lastlogin) - 1] = '\0';
                    memcpy (last_ip, RFIFOP (fd, 84), sizeof (last_ip));
                    last_ip[sizeof (last_ip) - 1] = '\0';
                    memcpy (email, RFIFOP (fd, 100), sizeof (email));
                    email[sizeof (email) - 1] = '\0';
                    connect_until_time = (time_t) RFIFOL (fd, 140);
                    ban_until_time = (time_t) RFIFOL (fd, 144);
                    memset (memo, '\0', sizeof (memo));
                    strncpy (memo, RFIFOP (fd, 150), RFIFOW (fd, 148));
                    if (RFIFOL (fd, 2) == -1)
                    {
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("Impossible de trouver le compte [%s]. Le compte n'existe pas.\n",
                                 parameters);
                            ladmin_log
                                ("Impossible de trouver le compte [%s]. Le compte n'existe pas."
                                 RETCODE, parameters);
                        }
                        else
                        {
                            printf
                                ("Unabled to find the account [%s]. Account doesn't exist.\n",
                                 parameters);
                            ladmin_log
                                ("Unabled to find the account [%s]. Account doesn't exist."
                                 RETCODE, parameters);
                        }
                    }
                    else if (strlen (userid) == 0)
                    {
                        if (defaultlanguage == 'F')
                        {
                            printf
                                ("Impossible de trouver le compte [id: %s]. Le compte n'existe pas.\n",
                                 parameters);
                            ladmin_log
                                ("Impossible de trouver le compte [id: %s]. Le compte n'existe pas."
                                 RETCODE, parameters);
                        }
                        else
                        {
                            printf
                                ("Unabled to find the account [id: %s]. Account doesn't exist.\n",
                                 parameters);
                            ladmin_log
                                ("Unabled to find the account [id: %s]. Account doesn't exist."
                                 RETCODE, parameters);
                        }
                    }
                    else
                    {
                        if (defaultlanguage == 'F')
                        {
                            ladmin_log
                                ("Réception d'information concernant un compte."
                                 RETCODE);
                            printf
                                ("Le compte a les caractéristiques suivantes:\n");
                        }
                        else
                        {
                            ladmin_log
                                ("Receiving information about an account."
                                 RETCODE);
                            printf ("The account is set with:\n");
                        }
                        if (RFIFOB (fd, 6) == 0)
                        {
                            printf (" Id:     %d (non-GM)\n", RFIFOL (fd, 2));
                        }
                        else
                        {
                            if (defaultlanguage == 'F')
                            {
                                printf (" Id:     %d (GM niveau %d)\n",
                                        RFIFOL (fd, 2), (int) RFIFOB (fd, 6));
                            }
                            else
                            {
                                printf (" Id:     %d (GM level %d)\n",
                                        RFIFOL (fd, 2), (int) RFIFOB (fd, 6));
                            }
                        }
                        if (defaultlanguage == 'F')
                        {
                            printf (" Nom:    '%s'\n", userid);
                            if (RFIFOB (fd, 31) == 0)
                                printf (" Sexe:   Femme\n");
                            else if (RFIFOB (fd, 31) == 1)
                                printf (" Sexe:   Male\n");
                            else
                                printf (" Sexe:   Serveur\n");
                        }
                        else
                        {
                            printf (" Name:   '%s'\n", userid);
                            if (RFIFOB (fd, 31) == 0)
                                printf (" Sex:    Female\n");
                            else if (RFIFOB (fd, 31) == 1)
                                printf (" Sex:    Male\n");
                            else
                                printf (" Sex:    Server\n");
                        }
                        printf (" E-mail: %s\n", email);
                        switch (RFIFOL (fd, 36))
                        {
                            case 0:
                                if (defaultlanguage == 'F')
                                    printf (" Statut: 0 [Compte Ok]\n");
                                else
                                    printf (" Statut: 0 [Account OK]\n");
                                break;
                            case 1:
                                printf (" Statut: 1 [Unregistered ID]\n");
                                break;
                            case 2:
                                printf (" Statut: 2 [Incorrect Password]\n");
                                break;
                            case 3:
                                printf (" Statut: 3 [This ID is expired]\n");
                                break;
                            case 4:
                                printf
                                    (" Statut: 4 [Rejected from Server]\n");
                                break;
                            case 5:
                                printf
                                    (" Statut: 5 [You have been blocked by the GM Team]\n");
                                break;
                            case 6:
                                printf
                                    (" Statut: 6 [Your Game's EXE file is not the latest version]\n");
                                break;
                            case 7:
                                printf
                                    (" Statut: 7 [You are Prohibited to log in until %s]\n",
                                     error_message);
                                break;
                            case 8:
                                printf
                                    (" Statut: 8 [Server is jammed due to over populated]\n");
                                break;
                            case 9:
                                printf (" Statut: 9 [No MSG]\n");
                                break;
                            default:   // 100
                                printf
                                    (" Statut: %d [This ID is totally erased]\n",
                                     RFIFOL (fd, 36));
                                break;
                        }
                        if (defaultlanguage == 'F')
                        {
                            if (ban_until_time == 0)
                            {
                                printf (" Banissement: non banni.\n");
                            }
                            else
                            {
                                char tmpstr[128];
                                strftime (tmpstr, 24, date_format,
                                          localtime (&ban_until_time));
                                printf (" Banissement: jusqu'au %s.\n",
                                        tmpstr);
                            }
                            if (RFIFOL (fd, 32) > 1)
                                printf (" Compteur: %d connexions.\n",
                                        RFIFOL (fd, 32));
                            else
                                printf (" Compteur: %d connexion.\n",
                                        RFIFOL (fd, 32));
                            printf (" Dernière connexion le: %s (ip: %s)\n",
                                    lastlogin, last_ip);
                            if (connect_until_time == 0)
                            {
                                printf (" Limite de validité: illimité.\n");
                            }
                            else
                            {
                                char tmpstr[128];
                                strftime (tmpstr, 24, date_format,
                                          localtime (&connect_until_time));
                                printf (" Limite de validité: jusqu'au %s.\n",
                                        tmpstr);
                            }
                        }
                        else
                        {
                            if (ban_until_time == 0)
                            {
                                printf (" Banishment: not banished.\n");
                            }
                            else
                            {
                                char tmpstr[128];
                                strftime (tmpstr, 24, date_format,
                                          localtime (&ban_until_time));
                                printf (" Banishment: until %s.\n", tmpstr);
                            }
                            if (RFIFOL (fd, 32) > 1)
                                printf (" Count:  %d connections.\n",
                                        RFIFOL (fd, 32));
                            else
                                printf (" Count:  %d connection.\n",
                                        RFIFOL (fd, 32));
                            printf (" Last connection at: %s (ip: %s)\n",
                                    lastlogin, last_ip);
                            if (connect_until_time == 0)
                            {
                                printf (" Validity limit: unlimited.\n");
                            }
                            else
                            {
                                char tmpstr[128];
                                strftime (tmpstr, 24, date_format,
                                          localtime (&connect_until_time));
                                printf (" Validity limit: until %s.\n",
                                        tmpstr);
                            }
                        }
                        printf (" Memo:   '%s'\n", memo);
                    }
                }
                bytes_to_read = 0;
                RFIFOSKIP (fd, 150 + RFIFOW (fd, 148));
                break;

            default:
                printf
                    ("Remote administration has been disconnected (unknown packet).\n");
                ladmin_log ("'End of connection, unknown packet." RETCODE);
                session[fd]->eof = 1;
                return 0;
        }
    }

    // if we don't wait new packets, do the prompt
    prompt ();

    return 0;
}

//------------------------------------
// Function to connect to login-server
//------------------------------------
int Connect_login_server ()
{
    if (defaultlanguage == 'F')
    {
        Iprintf ("Essai de connection au server de logins...\n");
        ladmin_log ("Essai de connection au server de logins..." RETCODE);
    }
    else
    {
        Iprintf ("Attempt to connect to login-server...\n");
        ladmin_log ("Attempt to connect to login-server..." RETCODE);
    }

    if ((login_fd = make_connection (login_ip, loginserverport)) < 0)
        return 0;

#ifdef PASSWORDENC
    if (passenc == 0)
    {
#endif
        WFIFOW (login_fd, 0) = 0x7918;  // Request for administation login
        WFIFOW (login_fd, 2) = 0;   // no encrypted
        memcpy (WFIFOP (login_fd, 4), loginserveradminpassword, 24);
        WFIFOSET (login_fd, 28);
        bytes_to_read = 1;

        if (defaultlanguage == 'F')
        {
            Iprintf ("Envoi du mot de passe...\n");
            ladmin_log ("Envoi du mot de passe..." RETCODE);
        }
        else
        {
            Iprintf ("Sending of the password...\n");
            ladmin_log ("Sending of the password..." RETCODE);
        }
#ifdef PASSWORDENC
    }
    else
    {
        WFIFOW (login_fd, 0) = 0x791a;  // Sending request about the coding key
        WFIFOSET (login_fd, 2);
        bytes_to_read = 1;
        if (defaultlanguage == 'F')
        {
            Iprintf ("Demande de la clef MD5...\n");
            ladmin_log ("Demande de la clef MD5..." RETCODE);
        }
        else
        {
            Iprintf ("Request about the MD5 key...\n");
            ladmin_log ("Request about the MD5 key..." RETCODE);
        }
    }
#endif

    return 0;
}

//-------------------------------------------------
// Return numerical value of a switch configuration
// on/off, english, français, deutsch, español
//-------------------------------------------------
int config_switch (const char *str)
{
    if (strcmpi (str, "on") == 0 || strcmpi (str, "yes") == 0
        || strcmpi (str, "oui") == 0 || strcmpi (str, "ja") == 0
        || strcmpi (str, "si") == 0)
        return 1;
    if (strcmpi (str, "off") == 0 || strcmpi (str, "no") == 0
        || strcmpi (str, "non") == 0 || strcmpi (str, "nein") == 0)
        return 0;

    return atoi (str);
}

//-----------------------------------
// Reading general configuration file
//-----------------------------------
int ladmin_config_read (const char *cfgName)
{
    char line[1024], w1[1024], w2[1024];
    FILE *fp;

    fp = fopen_ (cfgName, "r");
    if (fp == NULL)
    {
        if (defaultlanguage == 'F')
        {
            printf ("\033[0mFichier de configuration (%s) non trouvé.\n",
                    cfgName);
        }
        else
        {
            printf ("\033[0mConfiguration file (%s) not found.\n", cfgName);
        }
        return 1;
    }

    if (defaultlanguage == 'F')
    {
        Iprintf
            ("\033[0m---Début de lecture du fichier de configuration Ladmin (%s)\n",
             cfgName);
    }
    else
    {
        Iprintf
            ("\033[0m---Start reading of Ladmin configuration file (%s)\n",
             cfgName);
    }
    while (fgets (line, sizeof (line) - 1, fp))
    {
        if (line[0] == '/' && line[1] == '/')
            continue;

        line[sizeof (line) - 1] = '\0';
        if (sscanf (line, "%[^:]: %[^\r\n]", w1, w2) == 2)
        {
            remove_control_chars (w1);
            remove_control_chars (w2);

            if (strcmpi (w1, "login_ip") == 0)
            {
                struct hostent *h = gethostbyname (w2);
                if (h != NULL)
                {
                    if (defaultlanguage == 'F')
                    {
                        Iprintf
                            ("Adresse du serveur de logins: %s -> %d.%d.%d.%d\n",
                             w2, (unsigned char) h->h_addr[0],
                             (unsigned char) h->h_addr[1],
                             (unsigned char) h->h_addr[2],
                             (unsigned char) h->h_addr[3]);
                    }
                    else
                    {
                        Iprintf
                            ("Login server IP address: %s -> %d.%d.%d.%d\n",
                             w2, (unsigned char) h->h_addr[0],
                             (unsigned char) h->h_addr[1],
                             (unsigned char) h->h_addr[2],
                             (unsigned char) h->h_addr[3]);
                    }
                    sprintf (loginserverip, "%d.%d.%d.%d",
                             (unsigned char) h->h_addr[0],
                             (unsigned char) h->h_addr[1],
                             (unsigned char) h->h_addr[2],
                             (unsigned char) h->h_addr[3]);
                }
                else
                    memcpy (loginserverip, w2, 16);
            }
            else if (strcmpi (w1, "login_port") == 0)
            {
                loginserverport = atoi (w2);
            }
            else if (strcmpi (w1, "admin_pass") == 0)
            {
                strncpy (loginserveradminpassword, w2,
                         sizeof (loginserveradminpassword));
                loginserveradminpassword[sizeof (loginserveradminpassword) -
                                         1] = '\0';
#ifdef PASSWORDENC
            }
            else if (strcmpi (w1, "passenc") == 0)
            {
                passenc = atoi (w2);
                if (passenc < 0 || passenc > 2)
                    passenc = 0;
#endif
            }
            else if (strcmpi (w1, "defaultlanguage") == 0)
            {
                if (w2[0] == 'F' || w2[0] == 'E')
                    defaultlanguage = w2[0];
            }
            else if (strcmpi (w1, "ladmin_log_filename") == 0)
            {
                strncpy (ladmin_log_filename, w2,
                         sizeof (ladmin_log_filename));
                ladmin_log_filename[sizeof (ladmin_log_filename) - 1] = '\0';
            }
            else if (strcmpi (w1, "date_format") == 0)
            {                   // note: never have more than 19 char for the date!
                switch (atoi (w2))
                {
                    case 0:
                        strcpy (date_format, "%d-%m-%Y %H:%M:%S");  // 31-12-2004 23:59:59
                        break;
                    case 1:
                        strcpy (date_format, "%m-%d-%Y %H:%M:%S");  // 12-31-2004 23:59:59
                        break;
                    case 2:
                        strcpy (date_format, "%Y-%d-%m %H:%M:%S");  // 2004-31-12 23:59:59
                        break;
                    case 3:
                        strcpy (date_format, "%Y-%m-%d %H:%M:%S");  // 2004-12-31 23:59:59
                        break;
                }
            }
            else if (strcmpi (w1, "import") == 0)
            {
                ladmin_config_read (w2);
            }
        }
    }
    fclose_ (fp);

    login_ip = inet_addr (loginserverip);

    if (defaultlanguage == 'F')
    {
        Iprintf ("---Lecture du fichier de configuration Ladmin terminée.\n");
    }
    else
    {
        Iprintf ("---End reading of Ladmin configuration file.\n");
    }

    return 0;
}

//--------------------------------------
// Function called at exit of the server
//--------------------------------------
void do_final (void)
{

    if (already_exit_function == 0)
    {
        delete_session (login_fd);

        if (defaultlanguage == 'F')
        {
            Iprintf
                ("\033[0m----Fin de Ladmin (fin normale avec fermeture de tous les fichiers).\n");
            ladmin_log
                ("----Fin de Ladmin (fin normale avec fermeture de tous les fichiers)."
                 RETCODE);
        }
        else
        {
            Iprintf
                ("\033[0m----End of Ladmin (normal end with closing of all files).\n");
            ladmin_log
                ("----End of Ladmin (normal end with closing of all files)."
                 RETCODE);
        }

        already_exit_function = 1;
    }
}

//------------------------
// Main function of ladmin
//------------------------
int do_init (int argc, char **argv)
{
    // read ladmin configuration
    ladmin_config_read ((argc > 1) ? argv[1] : LADMIN_CONF_NAME);

    ladmin_log ("");
    if (defaultlanguage == 'F')
    {
        ladmin_log ("Fichier de configuration lu." RETCODE);
    }
    else
    {
        ladmin_log ("Configuration file readed." RETCODE);
    }

    srand (time (NULL));

    set_termfunc (do_final);
    set_defaultparse (parse_fromlogin);

    if (defaultlanguage == 'F')
    {
        Iprintf ("Outil d'administration à distance de eAthena.\n");
        Iprintf ("(pour eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION,
                 ATHENA_MINOR_VERSION, ATHENA_REVISION);
    }
    else
    {
        Iprintf ("EAthena login-server administration tool.\n");
        Iprintf ("(for eAthena version %d.%d.%d.)\n", ATHENA_MAJOR_VERSION,
                 ATHENA_MINOR_VERSION, ATHENA_REVISION);
    }

    if (defaultlanguage == 'F')
    {
        ladmin_log ("Ladmin est prêt." RETCODE);
        Iprintf ("Ladmin est \033[1;32mprêt\033[0m.\n\n");
    }
    else
    {
        ladmin_log ("Ladmin is ready." RETCODE);
        Iprintf ("Ladmin is \033[1;32mready\033[0m.\n\n");
    }

    Connect_login_server ();

    atexit (do_final);

    return 0;
}