From c7cc189b3007321b09c0c49de74baeef5b18606a Mon Sep 17 00:00:00 2001 From: Andrei Karas Date: Wed, 6 Sep 2017 23:01:40 +0300 Subject: Fix and update internal sdl2_gfx files. Used by default in SDL2 builds. --- build/bmakedebugsdl2 | 3 +- configure.ac | 10 +- src/Makefile.am | 4 +- src/sdl2gfx/SDL2_framerate.c | 189 ----- src/sdl2gfx/SDL2_framerate.cpp | 191 +++++ src/sdl2gfx/SDL2_framerate.h | 88 ++- src/sdl2gfx/SDL2_rotozoom.c | 1651 --------------------------------------- src/sdl2gfx/SDL2_rotozoom.cpp | 1667 ++++++++++++++++++++++++++++++++++++++++ src/sdl2gfx/SDL2_rotozoom.h | 7 +- 9 files changed, 1916 insertions(+), 1894 deletions(-) delete mode 100644 src/sdl2gfx/SDL2_framerate.c create mode 100644 src/sdl2gfx/SDL2_framerate.cpp delete mode 100644 src/sdl2gfx/SDL2_rotozoom.c create mode 100644 src/sdl2gfx/SDL2_rotozoom.cpp diff --git a/build/bmakedebugsdl2 b/build/bmakedebugsdl2 index d14f41278..e287fc081 100755 --- a/build/bmakedebugsdl2 +++ b/build/bmakedebugsdl2 @@ -35,7 +35,8 @@ cd build/tmp --enable-tcmalloc=no \ --enable-googleprofiler=no \ --enable-checks=yes \ ---with-sdl2 +--with-sdl2 \ +--enable-werror cd po make -j8 update-gmo 2>../../make1.log diff --git a/configure.ac b/configure.ac index 5fea31696..e33861163 100755 --- a/configure.ac +++ b/configure.ac @@ -232,6 +232,9 @@ esac AM_CONDITIONAL(MINGW, test x$mingw = xtrue) +# Option to enable internal sdl-gfx for SDL2 (for now it enabled by default) +AC_ARG_WITH(internalsdlgfx,[ --without-internalsdlgfx don't use internal sdlgfx (for SDL2 only) ] ) + AC_DEFUN([AC_CHECK_SDL], [ # Enable sdl2 @@ -242,8 +245,10 @@ if test "x$with_sdl2" == "xyes"; then LIBS="$LIBS `$SDL_CONFIG --libs`" CPPFLAGS="$CPPFLAGS `$SDL_CONFIG --cflags`" fi - LIBS="$LIBS `$PKG_CONFIG --libs SDL2_gfx`" - CPPFLAGS="$CPPFLAGS `$PKG_CONFIG --cflags SDL2_gfx`" + if test "x$with_internalsdlgfx" == "xno"; then + LIBS="$LIBS `$PKG_CONFIG --libs SDL2_gfx`" + CPPFLAGS="$CPPFLAGS `$PKG_CONFIG --cflags SDL2_gfx`" + fi LIBS="$LIBS `$PKG_CONFIG --libs SDL2_image`" CPPFLAGS="$CPPFLAGS `$PKG_CONFIG --cflags SDL2_image`" LIBS="$LIBS `$PKG_CONFIG --libs SDL2_mixer`" @@ -316,7 +321,6 @@ fi AM_CONDITIONAL(USE_SDL2, test x$with_sdl2 = xyes) # Option to enable internal sdl-gfx for SDL2 (for now it enabled by default) -AC_ARG_WITH(internalsdlgfx,[ --without-internalsdlgfx don't use internal sdlgfx (for SDL2 only) ] ) if test "x$with_internalsdlgfx" == "xno"; then with_internalsdlgfx=no diff --git a/src/Makefile.am b/src/Makefile.am index 9497c7943..57b3ce58a 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -172,9 +172,9 @@ if USE_SDL2 if USE_INTERNALSDLGFX dyecmd_CXXFLAGS += -I$(srcdir)/sdl2gfx -DUSE_SDL2 manaplus_CXXFLAGS += -I$(srcdir)/sdl2gfx -DUSE_SDL2 -BASE_SRC += sdl2gfx/SDL2_framerate.c \ +BASE_SRC += sdl2gfx/SDL2_framerate.cpp \ sdl2gfx/SDL2_framerate.h \ - sdl2gfx/SDL2_rotozoom.c \ + sdl2gfx/SDL2_rotozoom.cpp \ sdl2gfx/SDL2_rotozoom.h else dyecmd_CXXFLAGS += -DUSE_SDL2 diff --git a/src/sdl2gfx/SDL2_framerate.c b/src/sdl2gfx/SDL2_framerate.c deleted file mode 100644 index b31b0feb2..000000000 --- a/src/sdl2gfx/SDL2_framerate.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - -SDL_framerate.c: framerate manager - -Copyright (C) 2001-2012 Andreas Schiffler - -This software is provided 'as-is', without any express or implied -warranty. In no event will the authors be held liable for any damages -arising from the use of this software. - -Permission is granted to anyone to use this software for any purpose, -including commercial applications, and to alter it and redistribute it -freely, subject to the following restrictions: - -1. The origin of this software must not be misrepresented; you must not -claim that you wrote the original software. If you use this software -in a product, an acknowledgment in the product documentation would be -appreciated but is not required. - -2. Altered source versions must be plainly marked as such, and must not be -misrepresented as being the original software. - -3. This notice may not be removed or altered from any source -distribution. - -Andreas Schiffler -- aschiffler at ferzkopp dot net - -Changed for ManaPlus (C) 2013 ManaPlus developers -*/ - -#include "SDL2_framerate.h" - -/*! -\brief Internal wrapper to SDL_GetTicks that ensures a non-zero return value. - -\return The tick count. -*/ -uint32_t _getTicks() -{ - const uint32_t ticks = SDL_GetTicks(); - - /* - * Since baseticks!=0 is used to track initialization - * we need to ensure that the tick count is always >0 - * since SDL_GetTicks may not have incremented yet and - * return 0 depending on the timing of the calls. - */ - if (ticks == 0) - return 1; - else - return ticks; -} - -/*! -\brief Initialize the framerate manager. - -Initialize the framerate manager, set default framerate of 30Hz and -reset delay interpolation. - -\param manager Pointer to the framerate manager. -*/ -void SDL_initFramerate(FPSmanager *const manager) -{ - /* - * Store some sane values - */ - manager->framecount = 0; - manager->rate = FPS_DEFAULT; - manager->rateticks = (1000.0f / (float) FPS_DEFAULT); - manager->baseticks = _getTicks(); - manager->lastticks = manager->baseticks; - -} - -/*! -\brief Set the framerate in Hz - -Sets a new framerate for the manager and reset delay interpolation. -Rate values must be between FPS_LOWER_LIMIT and FPS_UPPER_LIMIT inclusive to be accepted. - -\param manager Pointer to the framerate manager. -\param rate The new framerate in Hz (frames per second). - -\return 0 for sucess and -1 for error. -*/ -int SDL_setFramerate(FPSmanager *const manager, const uint32_t rate) -{ - if (rate >= FPS_LOWER_LIMIT && rate <= FPS_UPPER_LIMIT) - { - manager->framecount = 0; - manager->rate = rate; - manager->rateticks = (1000.0f / (float) rate); - return 0; - } - else - { - return -1; - } -} - -/*! -\brief Return the current target framerate in Hz - -Get the currently set framerate of the manager. - -\param manager Pointer to the framerate manager. - -\return Current framerate in Hz or -1 for error. -*/ -int SDL_getFramerate(FPSmanager *const manager) -{ - if (!manager) - return -1; - else - return (int)manager->rate; -} - -/*! -\brief Return the current framecount. - -Get the current framecount from the framerate manager. -A frame is counted each time SDL_framerateDelay is called. - -\param manager Pointer to the framerate manager. - -\return Current frame count or -1 for error. -*/ -int SDL_getFramecount(FPSmanager *const manager) -{ - if (!manager) - return -1; - else - return (int)manager->framecount; -} - -/*! -\brief Delay execution to maintain a constant framerate and calculate fps. - -Generate a delay to accomodate currently set framerate. Call once in the -graphics/rendering loop. If the computer cannot keep up with the rate (i.e. -drawing too slow), the delay is zero and the delay interpolation is reset. - -\param manager Pointer to the framerate manager. - -\return The time that passed since the last call to the function in ms. May return 0. -*/ -uint32_t SDL_framerateDelay(FPSmanager *const manager) -{ - uint32_t the_delay; - - /* - * No manager, no delay - */ - if (!manager) - return 0; - - /* - * Initialize uninitialized manager - */ - if (manager->baseticks == 0) - SDL_initFramerate(manager); - - /* - * Next frame - */ - manager->framecount ++; - - /* - * Get/calc ticks - */ - const uint32_t current_ticks = _getTicks(); - const uint32_t time_passed = current_ticks - manager->lastticks; - manager->lastticks = current_ticks; - const uint32_t target_ticks = manager->baseticks + (uint32_t)( - (float)(manager->framecount) * manager->rateticks); - - if (current_ticks <= target_ticks) - { - the_delay = target_ticks - current_ticks; - SDL_Delay(the_delay); - } - else - { - manager->framecount = 0; - manager->baseticks = _getTicks(); - } - - return time_passed; -} diff --git a/src/sdl2gfx/SDL2_framerate.cpp b/src/sdl2gfx/SDL2_framerate.cpp new file mode 100644 index 000000000..bb8cc1c75 --- /dev/null +++ b/src/sdl2gfx/SDL2_framerate.cpp @@ -0,0 +1,191 @@ +/* + +SDL2_framerate.c: framerate manager + +Copyright (C) 2012-2014 Andreas Schiffler + +This software is provided 'as-is', without any express or implied +warranty. In no event will the authors be held liable for any damages +arising from the use of this software. + +Permission is granted to anyone to use this software for any purpose, +including commercial applications, and to alter it and redistribute it +freely, subject to the following restrictions: + +1. The origin of this software must not be misrepresented; you must not +claim that you wrote the original software. If you use this software +in a product, an acknowledgment in the product documentation would be +appreciated but is not required. + +2. Altered source versions must be plainly marked as such, and must not be +misrepresented as being the original software. + +3. This notice may not be removed or altered from any source +distribution. + +Andreas Schiffler -- aschiffler at ferzkopp dot net + +Changed for ManaPlus (C) 2013-2017 ManaPlus developers + +*/ + +#include "sdl2gfx/SDL2_framerate.h" + +/*! +\brief Internal wrapper to SDL_GetTicks that ensures a non-zero return value. + +\return The tick count. +*/ +static Uint32 _getTicks() +{ + Uint32 ticks = SDL_GetTicks(); + + /* + * Since baseticks!=0 is used to track initialization + * we need to ensure that the tick count is always >0 + * since SDL_GetTicks may not have incremented yet and + * return 0 depending on the timing of the calls. + */ + if (ticks == 0) { + return 1; + } else { + return ticks; + } +} + +/*! +\brief Initialize the framerate manager. + +Initialize the framerate manager, set default framerate of 30Hz and +reset delay interpolation. + +\param manager Pointer to the framerate manager. +*/ +void SDL_initFramerate(FPSmanager * manager) +{ + /* + * Store some sane values + */ + manager->framecount = 0; + manager->rate = FPS_DEFAULT; + manager->rateticks = (1000.0f / static_cast(FPS_DEFAULT)); + manager->baseticks = _getTicks(); + manager->lastticks = manager->baseticks; + +} + +/*! +\brief Set the framerate in Hz + +Sets a new framerate for the manager and reset delay interpolation. +Rate values must be between FPS_LOWER_LIMIT and FPS_UPPER_LIMIT inclusive to be accepted. + +\param manager Pointer to the framerate manager. +\param rate The new framerate in Hz (frames per second). + +\return 0 for sucess and -1 for error. +*/ +int SDL_setFramerate(FPSmanager * manager, Uint32 rate) +{ + if ((rate >= FPS_LOWER_LIMIT) && (rate <= FPS_UPPER_LIMIT)) { + manager->framecount = 0; + manager->rate = rate; + manager->rateticks = (1000.0f / static_cast(rate)); + return (0); + } else { + return (-1); + } +} + +/*! +\brief Return the current target framerate in Hz + +Get the currently set framerate of the manager. + +\param manager Pointer to the framerate manager. + +\return Current framerate in Hz or -1 for error. +*/ +int SDL_getFramerate(FPSmanager * manager) +{ + if (manager == nullptr) { + return (-1); + } else { + return (static_cast(manager->rate)); + } +} + +/*! +\brief Return the current framecount. + +Get the current framecount from the framerate manager. +A frame is counted each time SDL_framerateDelay is called. + +\param manager Pointer to the framerate manager. + +\return Current frame count or -1 for error. +*/ +int SDL_getFramecount(FPSmanager * manager) +{ + if (manager == nullptr) { + return (-1); + } else { + return (static_cast(manager->framecount)); + } +} + +/*! +\brief Delay execution to maintain a constant framerate and calculate fps. + +Generate a delay to accomodate currently set framerate. Call once in the +graphics/rendering loop. If the computer cannot keep up with the rate (i.e. +drawing too slow), the delay is zero and the delay interpolation is reset. + +\param manager Pointer to the framerate manager. + +\return The time that passed since the last call to the function in ms. May return 0. +*/ +Uint32 SDL_framerateDelay(FPSmanager * manager) +{ + Uint32 current_ticks; + Uint32 target_ticks; + Uint32 the_delay; + Uint32 time_passed = 0; + + /* + * No manager, no delay + */ + if (manager == nullptr) { + return 0; + } + + /* + * Initialize uninitialized manager + */ + if (manager->baseticks == 0) { + SDL_initFramerate(manager); + } + + /* + * Next frame + */ + manager->framecount++; + + /* + * Get/calc ticks + */ + current_ticks = _getTicks(); + time_passed = current_ticks - manager->lastticks; + manager->lastticks = current_ticks; + target_ticks = manager->baseticks + static_cast(static_cast(manager->framecount) * manager->rateticks); + + if (current_ticks <= target_ticks) { + the_delay = target_ticks - current_ticks; + SDL_Delay(the_delay); + } else { + manager->framecount = 0; + manager->baseticks = _getTicks(); + } + + return time_passed; +} diff --git a/src/sdl2gfx/SDL2_framerate.h b/src/sdl2gfx/SDL2_framerate.h index 4361b1f60..f08321140 100644 --- a/src/sdl2gfx/SDL2_framerate.h +++ b/src/sdl2gfx/SDL2_framerate.h @@ -2,7 +2,7 @@ SDL2_framerate.h: framerate manager -Copyright (C) 2012 Andreas Schiffler +Copyright (C) 2012-2014 Andreas Schiffler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages @@ -25,6 +25,8 @@ distribution. Andreas Schiffler -- aschiffler at ferzkopp dot net +Changed for ManaPlus (C) 2013-2017 ManaPlus developers + */ #ifndef _SDL2_framerate_h @@ -32,11 +34,10 @@ Andreas Schiffler -- aschiffler at ferzkopp dot net /* Set up for C function definitions, even when using C++ */ #ifdef __cplusplus -extern "C" -{ +extern "C" { #endif - /* --- */ + /* --- */ #include "localconsts.h" @@ -45,36 +46,35 @@ PRAGMA48(GCC diagnostic ignored "-Wshadow") #include PRAGMA48(GCC diagnostic pop) - /* --------- Definitions */ - - /*! - \brief Highest possible rate supported by framerate controller in Hz (1/s). - */ -#define FPS_UPPER_LIMIT 200 - - /*! - \brief Lowest possible rate supported by framerate controller in Hz (1/s). - */ -#define FPS_LOWER_LIMIT 1 - - /*! - \brief Default rate of framerate controller in Hz (1/s). - */ -#define FPS_DEFAULT 30 - - /*! - \brief Structure holding the state and timing information of the framerate controller. - */ - typedef struct - { - uint32_t framecount; - float rateticks; - uint32_t baseticks; - uint32_t lastticks; - uint32_t rate; - } FPSmanager; - - /* ---- Function Prototypes */ + /* --------- Definitions */ + + /*! + \brief Highest possible rate supported by framerate controller in Hz (1/s). + */ +#define FPS_UPPER_LIMIT 200 + + /*! + \brief Lowest possible rate supported by framerate controller in Hz (1/s). + */ +#define FPS_LOWER_LIMIT 1 + + /*! + \brief Default rate of framerate controller in Hz (1/s). + */ +#define FPS_DEFAULT 30 + + /*! + \brief Structure holding the state and timing information of the framerate controller. + */ + typedef struct { + Uint32 framecount; + float rateticks; + Uint32 baseticks; + Uint32 lastticks; + Uint32 rate; + } FPSmanager; + + /* ---- Function Prototypes */ #ifdef _MSC_VER # if defined(DLL_EXPORT) && !defined(LIBSDL2_GFX_DLL_IMPORT) @@ -89,21 +89,19 @@ PRAGMA48(GCC diagnostic pop) # define SDL2_FRAMERATE_SCOPE extern #endif - /* Functions return 0 or value for sucess and -1 for error */ + /* Functions return 0 or value for sucess and -1 for error */ - SDL2_FRAMERATE_SCOPE void SDL_initFramerate(FPSmanager *const manager); - SDL2_FRAMERATE_SCOPE int SDL_setFramerate(FPSmanager *const manager, - const uint32_t rate); - SDL2_FRAMERATE_SCOPE int SDL_getFramerate(FPSmanager *const manager); - SDL2_FRAMERATE_SCOPE int SDL_getFramecount(FPSmanager *const manager); - SDL2_FRAMERATE_SCOPE uint32_t SDL_framerateDelay(FPSmanager *const - manager); + SDL2_FRAMERATE_SCOPE void SDL_initFramerate(FPSmanager * manager); + SDL2_FRAMERATE_SCOPE int SDL_setFramerate(FPSmanager * manager, Uint32 rate); + SDL2_FRAMERATE_SCOPE int SDL_getFramerate(FPSmanager * manager); + SDL2_FRAMERATE_SCOPE int SDL_getFramecount(FPSmanager * manager); + SDL2_FRAMERATE_SCOPE Uint32 SDL_framerateDelay(FPSmanager * manager); - /* --- */ + /* --- */ - /* Ends C function definitions when using C++ */ + /* Ends C function definitions when using C++ */ #ifdef __cplusplus } #endif -#endif /* _SDL2_framerate_h */ +#endif /* _SDL2_framerate_h */ diff --git a/src/sdl2gfx/SDL2_rotozoom.c b/src/sdl2gfx/SDL2_rotozoom.c deleted file mode 100644 index 058074de1..000000000 --- a/src/sdl2gfx/SDL2_rotozoom.c +++ /dev/null @@ -1,1651 +0,0 @@ -/* - -SDL2_rotozoom.c: rotozoomer, zoomer and shrinker for 32bit or 8bit surfaces - -Copyright (C) 2012 Andreas Schiffler - -This software is provided 'as-is', without any express or implied -warranty. In no event will the authors be held liable for any damages -arising from the use of this software. - -Permission is granted to anyone to use this software for any purpose, -including commercial applications, and to alter it and redistribute it -freely, subject to the following restrictions: - -1. The origin of this software must not be misrepresented; you must not -claim that you wrote the original software. If you use this software -in a product, an acknowledgment in the product documentation would be -appreciated but is not required. - -2. Altered source versions must be plainly marked as such, and must not be -misrepresented as being the original software. - -3. This notice may not be removed or altered from any source -distribution. - -Andreas Schiffler -- aschiffler at ferzkopp dot net - -*/ - -#ifdef WIN32 -#include -#endif - -#include -#include - -#include "SDL2_rotozoom.h" - -/* ---- Internally used structures */ - -/*! -\brief A 32 bit RGBA pixel. -*/ -typedef struct tColorRGBA { - Uint8 r; - Uint8 g; - Uint8 b; - Uint8 a; -} tColorRGBA; - -/*! -\brief A 8bit Y/palette pixel. -*/ -typedef struct tColorY { - Uint8 y; -} tColorY; - -/*! -\brief Returns maximum of two numbers a and b. -*/ -#define MAX(a,b) (((a) > (b)) ? (a) : (b)) - -/*! -\brief Number of guard rows added to destination surfaces. - -This is a simple but effective workaround for observed issues. -These rows allocate extra memory and are then hidden from the surface. -Rows are added to the end of destination surfaces when they are allocated. -This catches any potential overflows which seem to happen with -just the right src image dimensions and scale/rotation and can lead -to a situation where the program can segfault. -*/ -#define GUARD_ROWS (2) - -/*! -\brief Lower limit of absolute zoom factor or rotation degrees. -*/ -#define VALUE_LIMIT 0.001 - -/*! -\brief Returns colorkey info for a surface -*/ -Uint32 _colorkey(SDL_Surface *src) -{ - Uint32 key = 0; - SDL_GetColorKey(src, &key); - return key; -} - - -/*! -\brief Internal 32 bit integer-factor averaging Shrinker. - -Shrinks 32 bit RGBA/ABGR 'src' surface to 'dst' surface. -Averages color and alpha values values of src pixels to calculate dst pixels. -Assumes src and dst surfaces are of 32 bit depth. -Assumes dst surface was allocated with the correct dimensions. - -\param src The surface to shrink (input). -\param dst The shrunken surface (output). -\param factorx The horizontal shrinking ratio. -\param factory The vertical shrinking ratio. - -\return 0 for success or -1 for error. -*/ -int _shrinkSurfaceRGBA(SDL_Surface * src, SDL_Surface * dst, int factorx, int factory) -{ - int x, y, dx, dy, sgap, dgap, ra, ga, ba, aa; - int n_average; - tColorRGBA *sp, *osp, *oosp; - tColorRGBA *dp; - - /* - * Averaging integer shrink - */ - - /* Precalculate division factor */ - n_average = factorx*factory; - - /* - * Scan destination - */ - sp = (tColorRGBA *) src->pixels; - sgap = src->pitch - src->w * 4; - - dp = (tColorRGBA *) dst->pixels; - dgap = dst->pitch - dst->w * 4; - - for (y = 0; y < dst->h; y++) { - - osp=sp; - for (x = 0; x < dst->w; x++) { - - /* Trace out source box and accumulate */ - oosp=sp; - ra=ga=ba=aa=0; - for (dy=0; dy < factory; dy++) { - for (dx=0; dx < factorx; dx++) { - ra += sp->r; - ga += sp->g; - ba += sp->b; - aa += sp->a; - - sp++; - } - /* src dx loop */ - sp = (tColorRGBA *)((Uint8*)sp + (src->pitch - 4*factorx)); // next y - } - /* src dy loop */ - - /* next box-x */ - sp = (tColorRGBA *)((Uint8*)oosp + 4*factorx); - - /* Store result in destination */ - dp->r = ra/n_average; - dp->g = ga/n_average; - dp->b = ba/n_average; - dp->a = aa/n_average; - - /* - * Advance destination pointer - */ - dp++; - } - /* dst x loop */ - - /* next box-y */ - sp = (tColorRGBA *)((Uint8*)osp + src->pitch*factory); - - /* - * Advance destination pointers - */ - dp = (tColorRGBA *) ((Uint8 *) dp + dgap); - } - /* dst y loop */ - - return (0); -} - -/*! -\brief Internal 8 bit integer-factor averaging shrinker. - -Shrinks 8bit Y 'src' surface to 'dst' surface. -Averages color (brightness) values values of src pixels to calculate dst pixels. -Assumes src and dst surfaces are of 8 bit depth. -Assumes dst surface was allocated with the correct dimensions. - -\param src The surface to shrink (input). -\param dst The shrunken surface (output). -\param factorx The horizontal shrinking ratio. -\param factory The vertical shrinking ratio. - -\return 0 for success or -1 for error. -*/ -int _shrinkSurfaceY(SDL_Surface * src, SDL_Surface * dst, int factorx, int factory) -{ - int x, y, dx, dy, sgap, dgap, a; - int n_average; - Uint8 *sp, *osp, *oosp; - Uint8 *dp; - - /* - * Averaging integer shrink - */ - - /* Precalculate division factor */ - n_average = factorx*factory; - - /* - * Scan destination - */ - sp = (Uint8 *) src->pixels; - sgap = src->pitch - src->w; - - dp = (Uint8 *) dst->pixels; - dgap = dst->pitch - dst->w; - - for (y = 0; y < dst->h; y++) { - - osp=sp; - for (x = 0; x < dst->w; x++) { - - /* Trace out source box and accumulate */ - oosp=sp; - a=0; - for (dy=0; dy < factory; dy++) { - for (dx=0; dx < factorx; dx++) { - a += (*sp); - /* next x */ - sp++; - } - /* end src dx loop */ - /* next y */ - sp = (Uint8 *)((Uint8*)sp + (src->pitch - factorx)); - } - /* end src dy loop */ - - /* next box-x */ - sp = (Uint8 *)((Uint8*)oosp + factorx); - - /* Store result in destination */ - *dp = a/n_average; - - /* - * Advance destination pointer - */ - dp++; - } - /* end dst x loop */ - - /* next box-y */ - sp = (Uint8 *)((Uint8*)osp + src->pitch*factory); - - /* - * Advance destination pointers - */ - dp = (Uint8 *)((Uint8 *)dp + dgap); - } - /* end dst y loop */ - - return (0); -} - -/*! -\brief Internal 32 bit Zoomer with optional anti-aliasing by bilinear interpolation. - -Zooms 32 bit RGBA/ABGR 'src' surface to 'dst' surface. -Assumes src and dst surfaces are of 32 bit depth. -Assumes dst surface was allocated with the correct dimensions. - -\param src The surface to zoom (input). -\param dst The zoomed surface (output). -\param flipx Flag indicating if the image should be horizontally flipped. -\param flipy Flag indicating if the image should be vertically flipped. -\param smooth Antialiasing flag; set to SMOOTHING_ON to enable. - -\return 0 for success or -1 for error. -*/ -int _zoomSurfaceRGBA(SDL_Surface * src, SDL_Surface * dst, int flipx, int flipy, int smooth) -{ - int x, y, sx, sy, ssx, ssy, *sax, *say, *csax, *csay, *salast, csx, csy, ex, ey, cx, cy, sstep, sstepx, sstepy; - tColorRGBA *c00, *c01, *c10, *c11; - tColorRGBA *sp, *csp, *dp; - int spixelgap, spixelw, spixelh, dgap, t1, t2; - - /* - * Allocate memory for row/column increments - */ - if ((sax = (int *) malloc((dst->w + 1) * sizeof(Uint32))) == NULL) { - return (-1); - } - if ((say = (int *) malloc((dst->h + 1) * sizeof(Uint32))) == NULL) { - free(sax); - return (-1); - } - - /* - * Precalculate row increments - */ - spixelw = (src->w - 1); - spixelh = (src->h - 1); - if (smooth) { - sx = (int) (65536.0 * (float) spixelw / (float) (dst->w - 1)); - sy = (int) (65536.0 * (float) spixelh / (float) (dst->h - 1)); - } else { - sx = (int) (65536.0 * (float) (src->w) / (float) (dst->w)); - sy = (int) (65536.0 * (float) (src->h) / (float) (dst->h)); - } - - /* Maximum scaled source size */ - ssx = (src->w << 16) - 1; - ssy = (src->h << 16) - 1; - - /* Precalculate horizontal row increments */ - csx = 0; - csax = sax; - for (x = 0; x <= dst->w; x++) { - *csax = csx; - csax++; - csx += sx; - - /* Guard from overflows */ - if (csx > ssx) { - csx = ssx; - } - } - - /* Precalculate vertical row increments */ - csy = 0; - csay = say; - for (y = 0; y <= dst->h; y++) { - *csay = csy; - csay++; - csy += sy; - - /* Guard from overflows */ - if (csy > ssy) { - csy = ssy; - } - } - - sp = (tColorRGBA *) src->pixels; - dp = (tColorRGBA *) dst->pixels; - dgap = dst->pitch - dst->w * 4; - spixelgap = src->pitch/4; - - if (flipx) sp += spixelw; - if (flipy) sp += (spixelgap * spixelh); - - /* - * Switch between interpolating and non-interpolating code - */ - if (smooth) { - - /* - * Interpolating Zoom - */ - csay = say; - for (y = 0; y < dst->h; y++) { - csp = sp; - csax = sax; - for (x = 0; x < dst->w; x++) { - /* - * Setup color source pointers - */ - ex = (*csax & 0xffff); - ey = (*csay & 0xffff); - cx = (*csax >> 16); - cy = (*csay >> 16); - sstepx = cx < spixelw; - sstepy = cy < spixelh; - c00 = sp; - c01 = sp; - c10 = sp; - if (sstepy) { - if (flipy) { - c10 -= spixelgap; - } else { - c10 += spixelgap; - } - } - c11 = c10; - if (sstepx) { - if (flipx) { - c01--; - c11--; - } else { - c01++; - c11++; - } - } - - /* - * Draw and interpolate colors - */ - t1 = ((((c01->r - c00->r) * ex) >> 16) + c00->r) & 0xff; - t2 = ((((c11->r - c10->r) * ex) >> 16) + c10->r) & 0xff; - dp->r = (((t2 - t1) * ey) >> 16) + t1; - t1 = ((((c01->g - c00->g) * ex) >> 16) + c00->g) & 0xff; - t2 = ((((c11->g - c10->g) * ex) >> 16) + c10->g) & 0xff; - dp->g = (((t2 - t1) * ey) >> 16) + t1; - t1 = ((((c01->b - c00->b) * ex) >> 16) + c00->b) & 0xff; - t2 = ((((c11->b - c10->b) * ex) >> 16) + c10->b) & 0xff; - dp->b = (((t2 - t1) * ey) >> 16) + t1; - t1 = ((((c01->a - c00->a) * ex) >> 16) + c00->a) & 0xff; - t2 = ((((c11->a - c10->a) * ex) >> 16) + c10->a) & 0xff; - dp->a = (((t2 - t1) * ey) >> 16) + t1; - /* - * Advance source pointer x - */ - salast = csax; - csax++; - sstep = (*csax >> 16) - (*salast >> 16); - if (flipx) { - sp -= sstep; - } else { - sp += sstep; - } - - /* - * Advance destination pointer x - */ - dp++; - } - /* - * Advance source pointer y - */ - salast = csay; - csay++; - sstep = (*csay >> 16) - (*salast >> 16); - sstep *= spixelgap; - if (flipy) { - sp = csp - sstep; - } else { - sp = csp + sstep; - } - - /* - * Advance destination pointer y - */ - dp = (tColorRGBA *) ((Uint8 *) dp + dgap); - } - } else { - /* - * Non-Interpolating Zoom - */ - csay = say; - for (y = 0; y < dst->h; y++) { - csp = sp; - csax = sax; - for (x = 0; x < dst->w; x++) { - /* - * Draw - */ - *dp = *sp; - - /* - * Advance source pointer x - */ - salast = csax; - csax++; - sstep = (*csax >> 16) - (*salast >> 16); - if (flipx) sstep = -sstep; - sp += sstep; - - /* - * Advance destination pointer x - */ - dp++; - } - /* - * Advance source pointer y - */ - salast = csay; - csay++; - sstep = (*csay >> 16) - (*salast >> 16); - sstep *= spixelgap; - if (flipy) sstep = -sstep; - sp = csp + sstep; - - /* - * Advance destination pointer y - */ - dp = (tColorRGBA *) ((Uint8 *) dp + dgap); - } - } - - /* - * Remove temp arrays - */ - free(sax); - free(say); - - return (0); -} - -/*! - -\brief Internal 8 bit Zoomer without smoothing. - -Zooms 8bit palette/Y 'src' surface to 'dst' surface. -Assumes src and dst surfaces are of 8 bit depth. -Assumes dst surface was allocated with the correct dimensions. - -\param src The surface to zoom (input). -\param dst The zoomed surface (output). -\param flipx Flag indicating if the image should be horizontally flipped. -\param flipy Flag indicating if the image should be vertically flipped. - -\return 0 for success or -1 for error. -*/ -int _zoomSurfaceY(SDL_Surface * src, SDL_Surface * dst, int flipx, int flipy) -{ - int x, y; - Uint32 *sax, *say, *csax, *csay; - int csx, csy; - Uint8 *sp, *dp, *csp; - int dgap; - - /* - * Allocate memory for row increments - */ - if ((sax = (Uint32 *) malloc((dst->w + 1) * sizeof(Uint32))) == NULL) { - return (-1); - } - if ((say = (Uint32 *) malloc((dst->h + 1) * sizeof(Uint32))) == NULL) { - free(sax); - return (-1); - } - - /* - * Pointer setup - */ - sp = csp = (Uint8 *) src->pixels; - dp = (Uint8 *) dst->pixels; - dgap = dst->pitch - dst->w; - - if (flipx) csp += (src->w-1); - if (flipy) csp = ( (Uint8*)csp + src->pitch*(src->h-1) ); - - /* - * Precalculate row increments - */ - csx = 0; - csax = sax; - for (x = 0; x < dst->w; x++) { - csx += src->w; - *csax = 0; - while (csx >= dst->w) { - csx -= dst->w; - (*csax)++; - } - (*csax) = (*csax) * (flipx ? -1 : 1); - csax++; - } - csy = 0; - csay = say; - for (y = 0; y < dst->h; y++) { - csy += src->h; - *csay = 0; - while (csy >= dst->h) { - csy -= dst->h; - (*csay)++; - } - (*csay) = (*csay) * (flipy ? -1 : 1); - csay++; - } - - /* - * Draw - */ - csay = say; - for (y = 0; y < dst->h; y++) { - csax = sax; - sp = csp; - for (x = 0; x < dst->w; x++) { - /* - * Draw - */ - *dp = *sp; - /* - * Advance source pointers - */ - sp += (*csax); - csax++; - /* - * Advance destination pointer - */ - dp++; - } - /* - * Advance source pointer (for row) - */ - csp += ((*csay) * src->pitch); - csay++; - - /* - * Advance destination pointers - */ - dp += dgap; - } - - /* - * Remove temp arrays - */ - free(sax); - free(say); - - return (0); -} - -/*! -\brief Internal 32 bit rotozoomer with optional anti-aliasing. - -Rotates and zooms 32 bit RGBA/ABGR 'src' surface to 'dst' surface based on the control -parameters by scanning the destination surface and applying optionally anti-aliasing -by bilinear interpolation. -Assumes src and dst surfaces are of 32 bit depth. -Assumes dst surface was allocated with the correct dimensions. - -\param src Source surface. -\param dst Destination surface. -\param cx Horizontal center coordinate. -\param cy Vertical center coordinate. -\param isin Integer version of sine of angle. -\param icos Integer version of cosine of angle. -\param flipx Flag indicating horizontal mirroring should be applied. -\param flipy Flag indicating vertical mirroring should be applied. -\param smooth Flag indicating anti-aliasing should be used. -*/ -void _transformSurfaceRGBA(SDL_Surface * src, SDL_Surface * dst, int cx, int cy, int isin, int icos, int flipx, int flipy, int smooth) -{ - int x, y, t1, t2, dx, dy, xd, yd, sdx, sdy, ax, ay, ex, ey, sw, sh; - tColorRGBA c00, c01, c10, c11, cswap; - tColorRGBA *pc, *sp; - int gap; - - /* - * Variable setup - */ - xd = ((src->w - dst->w) << 15); - yd = ((src->h - dst->h) << 15); - ax = (cx << 16) - (icos * cx); - ay = (cy << 16) - (isin * cx); - sw = src->w - 1; - sh = src->h - 1; - pc = (tColorRGBA*) dst->pixels; - gap = dst->pitch - dst->w * 4; - - /* - * Switch between interpolating and non-interpolating code - */ - if (smooth) { - for (y = 0; y < dst->h; y++) { - dy = cy - y; - sdx = (ax + (isin * dy)) + xd; - sdy = (ay - (icos * dy)) + yd; - for (x = 0; x < dst->w; x++) { - dx = (sdx >> 16); - dy = (sdy >> 16); - if (flipx) dx = sw - dx; - if (flipy) dy = sh - dy; - if ((dx > -1) && (dy > -1) && (dx < (src->w-1)) && (dy < (src->h-1))) { - sp = (tColorRGBA *)src->pixels;; - sp += ((src->pitch/4) * dy); - sp += dx; - c00 = *sp; - sp += 1; - c01 = *sp; - sp += (src->pitch/4); - c11 = *sp; - sp -= 1; - c10 = *sp; - if (flipx) { - cswap = c00; c00=c01; c01=cswap; - cswap = c10; c10=c11; c11=cswap; - } - if (flipy) { - cswap = c00; c00=c10; c10=cswap; - cswap = c01; c01=c11; c11=cswap; - } - /* - * Interpolate colors - */ - ex = (sdx & 0xffff); - ey = (sdy & 0xffff); - t1 = ((((c01.r - c00.r) * ex) >> 16) + c00.r) & 0xff; - t2 = ((((c11.r - c10.r) * ex) >> 16) + c10.r) & 0xff; - pc->r = (((t2 - t1) * ey) >> 16) + t1; - t1 = ((((c01.g - c00.g) * ex) >> 16) + c00.g) & 0xff; - t2 = ((((c11.g - c10.g) * ex) >> 16) + c10.g) & 0xff; - pc->g = (((t2 - t1) * ey) >> 16) + t1; - t1 = ((((c01.b - c00.b) * ex) >> 16) + c00.b) & 0xff; - t2 = ((((c11.b - c10.b) * ex) >> 16) + c10.b) & 0xff; - pc->b = (((t2 - t1) * ey) >> 16) + t1; - t1 = ((((c01.a - c00.a) * ex) >> 16) + c00.a) & 0xff; - t2 = ((((c11.a - c10.a) * ex) >> 16) + c10.a) & 0xff; - pc->a = (((t2 - t1) * ey) >> 16) + t1; - } - sdx += icos; - sdy += isin; - pc++; - } - pc = (tColorRGBA *) ((Uint8 *) pc + gap); - } - } else { - for (y = 0; y < dst->h; y++) { - dy = cy - y; - sdx = (ax + (isin * dy)) + xd; - sdy = (ay - (icos * dy)) + yd; - for (x = 0; x < dst->w; x++) { - dx = (short) (sdx >> 16); - dy = (short) (sdy >> 16); - if (flipx) dx = (src->w-1)-dx; - if (flipy) dy = (src->h-1)-dy; - if ((dx >= 0) && (dy >= 0) && (dx < src->w) && (dy < src->h)) { - sp = (tColorRGBA *) ((Uint8 *) src->pixels + src->pitch * dy); - sp += dx; - *pc = *sp; - } - sdx += icos; - sdy += isin; - pc++; - } - pc = (tColorRGBA *) ((Uint8 *) pc + gap); - } - } -} - -/*! - -\brief Rotates and zooms 8 bit palette/Y 'src' surface to 'dst' surface without smoothing. - -Rotates and zooms 8 bit RGBA/ABGR 'src' surface to 'dst' surface based on the control -parameters by scanning the destination surface. -Assumes src and dst surfaces are of 8 bit depth. -Assumes dst surface was allocated with the correct dimensions. - -\param src Source surface. -\param dst Destination surface. -\param cx Horizontal center coordinate. -\param cy Vertical center coordinate. -\param isin Integer version of sine of angle. -\param icos Integer version of cosine of angle. -\param flipx Flag indicating horizontal mirroring should be applied. -\param flipy Flag indicating vertical mirroring should be applied. -*/ -void transformSurfaceY(SDL_Surface * src, SDL_Surface * dst, int cx, int cy, int isin, int icos, int flipx, int flipy) -{ - int x, y, dx, dy, xd, yd, sdx, sdy, ax, ay, sw, sh; - tColorY *pc, *sp; - int gap; - - /* - * Variable setup - */ - xd = ((src->w - dst->w) << 15); - yd = ((src->h - dst->h) << 15); - ax = (cx << 16) - (icos * cx); - ay = (cy << 16) - (isin * cx); - sw = src->w - 1; - sh = src->h - 1; - pc = (tColorY*) dst->pixels; - gap = dst->pitch - dst->w; - /* - * Clear surface to colorkey - */ - memset(pc, (int)(_colorkey(src) & 0xff), dst->pitch * dst->h); - /* - * Iterate through destination surface - */ - for (y = 0; y < dst->h; y++) { - dy = cy - y; - sdx = (ax + (isin * dy)) + xd; - sdy = (ay - (icos * dy)) + yd; - for (x = 0; x < dst->w; x++) { - dx = (short) (sdx >> 16); - dy = (short) (sdy >> 16); - if (flipx) dx = (src->w-1)-dx; - if (flipy) dy = (src->h-1)-dy; - if ((dx >= 0) && (dy >= 0) && (dx < src->w) && (dy < src->h)) { - sp = (tColorY *) (src->pixels); - sp += (src->pitch * dy + dx); - *pc = *sp; - } - sdx += icos; - sdy += isin; - pc++; - } - pc += gap; - } -} - -/*! -\brief Rotates a 32 bit surface in increments of 90 degrees. - -Specialized 90 degree rotator which rotates a 'src' surface in 90 degree -increments clockwise returning a new surface. Faster than rotozoomer since -not scanning or interpolation takes place. Input surface must be 32 bit. -(code contributed by J. Schiller, improved by C. Allport and A. Schiffler) - -\param src Source surface to rotate. -\param numClockwiseTurns Number of clockwise 90 degree turns to apply to the source. - -\returns The new, rotated surface; or NULL for surfaces with incorrect input format. -*/ -SDL_Surface* rotateSurface90Degrees(SDL_Surface* src, int numClockwiseTurns) -{ - int row, col, newWidth, newHeight; - int bpp, src_ipr, dst_ipr; - SDL_Surface* dst; - Uint32* srcBuf; - Uint32* dstBuf; - - /* Has to be a valid surface pointer and only 32-bit surfaces (for now) */ - if (!src || src->format->BitsPerPixel != 32) { return NULL; } - - /* normalize numClockwiseTurns */ - while(numClockwiseTurns < 0) { numClockwiseTurns += 4; } - numClockwiseTurns = (numClockwiseTurns % 4); - - /* if it's even, our new width will be the same as the source surface */ - newWidth = (numClockwiseTurns % 2) ? (src->h) : (src->w); - newHeight = (numClockwiseTurns % 2) ? (src->w) : (src->h); - dst = SDL_CreateRGBSurface( src->flags, newWidth, newHeight, src->format->BitsPerPixel, - src->format->Rmask, - src->format->Gmask, - src->format->Bmask, - src->format->Amask); - if(!dst) { - return NULL; - } - - if (SDL_MUSTLOCK(dst)) { - SDL_LockSurface(dst); - } - if (SDL_MUSTLOCK(dst)) { - SDL_LockSurface(dst); - } - - /* Calculate int-per-row */ - bpp = src->format->BitsPerPixel / 8; - src_ipr = src->pitch / bpp; - dst_ipr = dst->pitch / bpp; - - switch(numClockwiseTurns) { - case 0: /* Make a copy of the surface */ - { - /* Unfortunately SDL_BlitSurface cannot be used to make a copy of the surface - since it does not preserve alpha. */ - - if (src->pitch == dst->pitch) { - /* If the pitch is the same for both surfaces, the memory can be copied all at once. */ - memcpy(dst->pixels, src->pixels, (src->h * src->pitch)); - } - else - { - /* If the pitch differs, copy each row separately */ - srcBuf = (Uint32*)(src->pixels); - dstBuf = (Uint32*)(dst->pixels); - for (row = 0; row < src->h; row++) { - memcpy(dstBuf, srcBuf, dst->w * bpp); - srcBuf += src_ipr; - dstBuf += dst_ipr; - } /* end for(col) */ - } /* end for(row) */ - } - break; - - /* rotate clockwise */ - case 1: /* rotated 90 degrees clockwise */ - { - for (row = 0; row < src->h; ++row) { - srcBuf = (Uint32*)(src->pixels) + (row * src_ipr); - dstBuf = (Uint32*)(dst->pixels) + (dst->w - row - 1); - for (col = 0; col < src->w; ++col) { - *dstBuf = *srcBuf; - ++srcBuf; - dstBuf += dst_ipr; - } - /* end for(col) */ - } - /* end for(row) */ - } - break; - - case 2: /* rotated 180 degrees clockwise */ - { - for (row = 0; row < src->h; ++row) { - srcBuf = (Uint32*)(src->pixels) + (row * src_ipr); - dstBuf = (Uint32*)(dst->pixels) + ((dst->h - row - 1) * dst_ipr) + (dst->w - 1); - for (col = 0; col < src->w; ++col) { - *dstBuf = *srcBuf; - ++srcBuf; - --dstBuf; - } - } - } - break; - - case 3: - { - for (row = 0; row < src->h; ++row) { - srcBuf = (Uint32*)(src->pixels) + (row * src_ipr); - dstBuf = (Uint32*)(dst->pixels) + row + ((dst->h - 1) * dst_ipr); - for (col = 0; col < src->w; ++col) { - *dstBuf = *srcBuf; - ++srcBuf; - dstBuf -= dst_ipr; - } - } - } - break; - } - /* end switch */ - - if (SDL_MUSTLOCK(src)) { - SDL_UnlockSurface(src); - } - if (SDL_MUSTLOCK(dst)) { - SDL_UnlockSurface(dst); - } - - return dst; -} - - -/*! -\brief Internal target surface sizing function for rotozooms with trig result return. - -\param width The source surface width. -\param height The source surface height. -\param angle The angle to rotate in degrees. -\param zoomx The horizontal scaling factor. -\param zoomy The vertical scaling factor. -\param dstwidth The calculated width of the destination surface. -\param dstheight The calculated height of the destination surface. -\param canglezoom The sine of the angle adjusted by the zoom factor. -\param sanglezoom The cosine of the angle adjusted by the zoom factor. - -*/ -void _rotozoomSurfaceSizeTrig(int width, int height, double angle, double zoomx, double zoomy, - int *dstwidth, int *dstheight, - double *canglezoom, double *sanglezoom) -{ - double x, y, cx, cy, sx, sy; - double radangle; - int dstwidthhalf, dstheighthalf; - - /* - * Determine destination width and height by rotating a centered source box - */ - radangle = angle * (M_PI / 180.0); - *sanglezoom = sin(radangle); - *canglezoom = cos(radangle); - *sanglezoom *= zoomx; - *canglezoom *= zoomx; - x = (double)(width / 2); - y = (double)(height / 2); - cx = *canglezoom * x; - cy = *canglezoom * y; - sx = *sanglezoom * x; - sy = *sanglezoom * y; - - dstwidthhalf = MAX((int) - ceil(MAX(MAX(MAX(fabs(cx + sy), fabs(cx - sy)), fabs(-cx + sy)), fabs(-cx - sy))), 1); - dstheighthalf = MAX((int) - ceil(MAX(MAX(MAX(fabs(sx + cy), fabs(sx - cy)), fabs(-sx + cy)), fabs(-sx - cy))), 1); - *dstwidth = 2 * dstwidthhalf; - *dstheight = 2 * dstheighthalf; -} - -/*! -\brief Returns the size of the resulting target surface for a rotozoomSurfaceXY() call. - -\param width The source surface width. -\param height The source surface height. -\param angle The angle to rotate in degrees. -\param zoomx The horizontal scaling factor. -\param zoomy The vertical scaling factor. -\param dstwidth The calculated width of the rotozoomed destination surface. -\param dstheight The calculated height of the rotozoomed destination surface. -*/ -void rotozoomSurfaceSizeXY(int width, int height, double angle, double zoomx, double zoomy, int *dstwidth, int *dstheight) -{ - double dummy_sanglezoom, dummy_canglezoom; - - _rotozoomSurfaceSizeTrig(width, height, angle, zoomx, zoomy, dstwidth, dstheight, &dummy_sanglezoom, &dummy_canglezoom); -} - -/*! -\brief Returns the size of the resulting target surface for a rotozoomSurface() call. - -\param width The source surface width. -\param height The source surface height. -\param angle The angle to rotate in degrees. -\param zoom The scaling factor. -\param dstwidth The calculated width of the rotozoomed destination surface. -\param dstheight The calculated height of the rotozoomed destination surface. -*/ -void rotozoomSurfaceSize(int width, int height, double angle, double zoom, int *dstwidth, int *dstheight) -{ - double dummy_sanglezoom, dummy_canglezoom; - - _rotozoomSurfaceSizeTrig(width, height, angle, zoom, zoom, dstwidth, dstheight, &dummy_sanglezoom, &dummy_canglezoom); -} - -/*! -\brief Rotates and zooms a surface and optional anti-aliasing. - -Rotates and zoomes a 32bit or 8bit 'src' surface to newly created 'dst' surface. -'angle' is the rotation in degrees and 'zoom' a scaling factor. If 'smooth' is set -then the destination 32bit surface is anti-aliased. If the surface is not 8bit -or 32bit RGBA/ABGR it will be converted into a 32bit RGBA format on the fly. - -\param src The surface to rotozoom. -\param angle The angle to rotate in degrees. -\param zoom The scaling factor. -\param smooth Antialiasing flag; set to SMOOTHING_ON to enable. - -\return The new rotozoomed surface. -*/ -SDL_Surface *rotozoomSurface(SDL_Surface * src, double angle, double zoom, int smooth) -{ - return rotozoomSurfaceXY(src, angle, zoom, zoom, smooth); -} - -/*! -\brief Rotates and zooms a surface with different horizontal and vertival scaling factors and optional anti-aliasing. - -Rotates and zooms a 32bit or 8bit 'src' surface to newly created 'dst' surface. -'angle' is the rotation in degrees, 'zoomx and 'zoomy' scaling factors. If 'smooth' is set -then the destination 32bit surface is anti-aliased. If the surface is not 8bit -or 32bit RGBA/ABGR it will be converted into a 32bit RGBA format on the fly. - -\param src The surface to rotozoom. -\param angle The angle to rotate in degrees. -\param zoomx The horizontal scaling factor. -\param zoomy The vertical scaling factor. -\param smooth Antialiasing flag; set to SMOOTHING_ON to enable. - -\return The new rotozoomed surface. -*/ -SDL_Surface *rotozoomSurfaceXY(SDL_Surface * src, double angle, double zoomx, double zoomy, int smooth) -{ - SDL_Surface *rz_src; - SDL_Surface *rz_dst; - double zoominv; - double sanglezoom, canglezoom, sanglezoominv, canglezoominv; - int dstwidthhalf, dstwidth, dstheighthalf, dstheight; - int is32bit; - int i, src_converted; - int flipx,flipy; - - /* - * Sanity check - */ - if (src == NULL) { - return (NULL); - } - - /* - * Determine if source surface is 32bit or 8bit - */ - is32bit = (src->format->BitsPerPixel == 32); - if ((is32bit) || (src->format->BitsPerPixel == 8)) { - /* - * Use source surface 'as is' - */ - rz_src = src; - src_converted = 0; - } else { - /* - * New source surface is 32bit with a defined RGBA ordering - */ - rz_src = - SDL_CreateRGBSurface(SDL_SWSURFACE, src->w, src->h, 32, -#if SDL_BYTEORDER == SDL_LIL_ENDIAN - 0x000000ff, 0x0000ff00, 0x00ff0000, 0xff000000 -#else - 0xff000000, 0x00ff0000, 0x0000ff00, 0x000000ff -#endif - ); - - SDL_BlitSurface(src, NULL, rz_src, NULL); - - src_converted = 1; - is32bit = 1; - } - - /* - * Sanity check zoom factor - */ - flipx = (zoomx<0.0); - if (flipx) zoomx=-zoomx; - flipy = (zoomy<0.0); - if (flipy) zoomy=-zoomy; - if (zoomx < VALUE_LIMIT) zoomx = VALUE_LIMIT; - if (zoomy < VALUE_LIMIT) zoomy = VALUE_LIMIT; - zoominv = 65536.0 / (zoomx * zoomx); - - /* - * Check if we have a rotozoom or just a zoom - */ - if (fabs(angle) > VALUE_LIMIT) { - - /* - * Angle!=0: full rotozoom - */ - /* - * ----------------------- - */ - - /* Determine target size */ - _rotozoomSurfaceSizeTrig(rz_src->w, rz_src->h, angle, zoomx, zoomy, &dstwidth, &dstheight, &canglezoom, &sanglezoom); - - /* - * Calculate target factors from sin/cos and zoom - */ - sanglezoominv = sanglezoom; - canglezoominv = canglezoom; - sanglezoominv *= zoominv; - canglezoominv *= zoominv; - - /* Calculate half size */ - dstwidthhalf = dstwidth / 2; - dstheighthalf = dstheight / 2; - - /* - * Alloc space to completely contain the rotated surface - */ - rz_dst = NULL; - if (is32bit) { - /* - * Target surface is 32bit with source RGBA/ABGR ordering - */ - rz_dst = - SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 32, - rz_src->format->Rmask, rz_src->format->Gmask, - rz_src->format->Bmask, rz_src->format->Amask); - } else { - /* - * Target surface is 8bit - */ - rz_dst = SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 8, 0, 0, 0, 0); - } - - /* Check target */ - if (rz_dst == NULL) - return NULL; - - /* Adjust for guard rows */ - rz_dst->h = dstheight; - - /* - * Lock source surface - */ - if (SDL_MUSTLOCK(rz_src)) { - SDL_LockSurface(rz_src); - } - - /* - * Check which kind of surface we have - */ - if (is32bit) { - /* - * Call the 32bit transformation routine to do the rotation (using alpha) - */ - _transformSurfaceRGBA(rz_src, rz_dst, dstwidthhalf, dstheighthalf, - (int) (sanglezoominv), (int) (canglezoominv), - flipx, flipy, - smooth); - } else { - /* - * Copy palette and colorkey info - */ - for (i = 0; i < rz_src->format->palette->ncolors; i++) { - rz_dst->format->palette->colors[i] = rz_src->format->palette->colors[i]; - } - rz_dst->format->palette->ncolors = rz_src->format->palette->ncolors; - /* - * Call the 8bit transformation routine to do the rotation - */ - transformSurfaceY(rz_src, rz_dst, dstwidthhalf, dstheighthalf, - (int) (sanglezoominv), (int) (canglezoominv), - flipx, flipy); - } - /* - * Unlock source surface - */ - if (SDL_MUSTLOCK(rz_src)) { - SDL_UnlockSurface(rz_src); - } - - } else { - - /* - * Angle=0: Just a zoom - */ - /* - * -------------------- - */ - - /* - * Calculate target size - */ - zoomSurfaceSize(rz_src->w, rz_src->h, zoomx, zoomy, &dstwidth, &dstheight); - - /* - * Alloc space to completely contain the zoomed surface - */ - rz_dst = NULL; - if (is32bit) { - /* - * Target surface is 32bit with source RGBA/ABGR ordering - */ - rz_dst = - SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 32, - rz_src->format->Rmask, rz_src->format->Gmask, - rz_src->format->Bmask, rz_src->format->Amask); - } else { - /* - * Target surface is 8bit - */ - rz_dst = SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 8, 0, 0, 0, 0); - } - - /* Check target */ - if (rz_dst == NULL) - return NULL; - - /* Adjust for guard rows */ - rz_dst->h = dstheight; - - /* - * Lock source surface - */ - if (SDL_MUSTLOCK(rz_src)) { - SDL_LockSurface(rz_src); - } - - /* - * Check which kind of surface we have - */ - if (is32bit) { - /* - * Call the 32bit transformation routine to do the zooming (using alpha) - */ - _zoomSurfaceRGBA(rz_src, rz_dst, flipx, flipy, smooth); - - } else { - /* - * Copy palette and colorkey info - */ - for (i = 0; i < rz_src->format->palette->ncolors; i++) { - rz_dst->format->palette->colors[i] = rz_src->format->palette->colors[i]; - } - rz_dst->format->palette->ncolors = rz_src->format->palette->ncolors; - - /* - * Call the 8bit transformation routine to do the zooming - */ - _zoomSurfaceY(rz_src, rz_dst, flipx, flipy); - } - - /* - * Unlock source surface - */ - if (SDL_MUSTLOCK(rz_src)) { - SDL_UnlockSurface(rz_src); - } - } - - /* - * Cleanup temp surface - */ - if (src_converted) { - SDL_FreeSurface(rz_src); - } - - /* - * Return destination surface - */ - return (rz_dst); -} - -/*! -\brief Calculates the size of the target surface for a zoomSurface() call. - -The minimum size of the target surface is 1. The input factors can be positive or negative. - -\param width The width of the source surface to zoom. -\param height The height of the source surface to zoom. -\param zoomx The horizontal zoom factor. -\param zoomy The vertical zoom factor. -\param dstwidth Pointer to an integer to store the calculated width of the zoomed target surface. -\param dstheight Pointer to an integer to store the calculated height of the zoomed target surface. -*/ -void zoomSurfaceSize(int width, int height, double zoomx, double zoomy, int *dstwidth, int *dstheight) -{ - /* - * Make zoom factors positive - */ - int flipx, flipy; - flipx = (zoomx<0.0); - if (flipx) zoomx = -zoomx; - flipy = (zoomy<0.0); - if (flipy) zoomy = -zoomy; - - /* - * Sanity check zoom factors - */ - if (zoomx < VALUE_LIMIT) { - zoomx = VALUE_LIMIT; - } - if (zoomy < VALUE_LIMIT) { - zoomy = VALUE_LIMIT; - } - - /* - * Calculate target size - */ - *dstwidth = (int) floor(((double) width * zoomx) + 0.5); - *dstheight = (int) floor(((double) height * zoomy) + 0.5); - if (*dstwidth < 1) { - *dstwidth = 1; - } - if (*dstheight < 1) { - *dstheight = 1; - } -} - -/*! -\brief Zoom a surface by independent horizontal and vertical factors with optional smoothing. - -Zooms a 32bit or 8bit 'src' surface to newly created 'dst' surface. -'zoomx' and 'zoomy' are scaling factors for width and height. If 'smooth' is on -then the destination 32bit surface is anti-aliased. If the surface is not 8bit -or 32bit RGBA/ABGR it will be converted into a 32bit RGBA format on the fly. -If zoom factors are negative, the image is flipped on the axes. - -\param src The surface to zoom. -\param zoomx The horizontal zoom factor. -\param zoomy The vertical zoom factor. -\param smooth Antialiasing flag; set to SMOOTHING_ON to enable. - -\return The new, zoomed surface. -*/ -SDL_Surface *zoomSurface(SDL_Surface * src, double zoomx, double zoomy, int smooth) -{ - SDL_Surface *rz_src; - SDL_Surface *rz_dst; - int dstwidth, dstheight; - int is32bit; - int i, src_converted; - int flipx, flipy; - - /* - * Sanity check - */ - if (src == NULL) - return (NULL); - - /* - * Determine if source surface is 32bit or 8bit - */ - is32bit = (src->format->BitsPerPixel == 32); - if ((is32bit) || (src->format->BitsPerPixel == 8)) { - /* - * Use source surface 'as is' - */ - rz_src = src; - src_converted = 0; - } else { - /* - * New source surface is 32bit with a defined RGBA ordering - */ - rz_src = - SDL_CreateRGBSurface(SDL_SWSURFACE, src->w, src->h, 32, -#if SDL_BYTEORDER == SDL_LIL_ENDIAN - 0x000000ff, 0x0000ff00, 0x00ff0000, 0xff000000 -#else - 0xff000000, 0x00ff0000, 0x0000ff00, 0x000000ff -#endif - ); - if (rz_src == NULL) { - return NULL; - } - SDL_BlitSurface(src, NULL, rz_src, NULL); - src_converted = 1; - is32bit = 1; - } - - flipx = (zoomx<0.0); - if (flipx) zoomx = -zoomx; - flipy = (zoomy<0.0); - if (flipy) zoomy = -zoomy; - - /* Get size if target */ - zoomSurfaceSize(rz_src->w, rz_src->h, zoomx, zoomy, &dstwidth, &dstheight); - - /* - * Alloc space to completely contain the zoomed surface - */ - rz_dst = NULL; - if (is32bit) { - /* - * Target surface is 32bit with source RGBA/ABGR ordering - */ - rz_dst = - SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 32, - rz_src->format->Rmask, rz_src->format->Gmask, - rz_src->format->Bmask, rz_src->format->Amask); - } else { - /* - * Target surface is 8bit - */ - rz_dst = SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 8, 0, 0, 0, 0); - } - - /* Check target */ - if (rz_dst == NULL) { - /* - * Cleanup temp surface - */ - if (src_converted) { - SDL_FreeSurface(rz_src); - } - return NULL; - } - - /* Adjust for guard rows */ - rz_dst->h = dstheight; - - /* - * Lock source surface - */ - if (SDL_MUSTLOCK(rz_src)) { - SDL_LockSurface(rz_src); - } - - /* - * Check which kind of surface we have - */ - if (is32bit) { - /* - * Call the 32bit transformation routine to do the zooming (using alpha) - */ - _zoomSurfaceRGBA(rz_src, rz_dst, flipx, flipy, smooth); - } else { - /* - * Copy palette and colorkey info - */ - for (i = 0; i < rz_src->format->palette->ncolors; i++) { - rz_dst->format->palette->colors[i] = rz_src->format->palette->colors[i]; - } - rz_dst->format->palette->ncolors = rz_src->format->palette->ncolors; - /* - * Call the 8bit transformation routine to do the zooming - */ - _zoomSurfaceY(rz_src, rz_dst, flipx, flipy); - } - /* - * Unlock source surface - */ - if (SDL_MUSTLOCK(rz_src)) { - SDL_UnlockSurface(rz_src); - } - - /* - * Cleanup temp surface - */ - if (src_converted) { - SDL_FreeSurface(rz_src); - } - - /* - * Return destination surface - */ - return (rz_dst); -} - -/*! -\brief Shrink a surface by an integer ratio using averaging. - -Shrinks a 32bit or 8bit 'src' surface to a newly created 'dst' surface. -'factorx' and 'factory' are the shrinking ratios (i.e. 2=1/2 the size, -3=1/3 the size, etc.) The destination surface is antialiased by averaging -the source box RGBA or Y information. If the surface is not 8bit -or 32bit RGBA/ABGR it will be converted into a 32bit RGBA format on the fly. -The input surface is not modified. The output surface is newly allocated. - -\param src The surface to shrink. -\param factorx The horizontal shrinking ratio. -\param factory The vertical shrinking ratio. - -\return The new, shrunken surface. -*/ -/*@null@*/ -SDL_Surface *shrinkSurface(SDL_Surface *src, int factorx, int factory) -{ - int result; - SDL_Surface *rz_src; - SDL_Surface *rz_dst = NULL; - int dstwidth, dstheight; - int is32bit; - int i, src_converted; - int haveError = 0; - - /* - * Sanity check - */ - if (src == NULL) { - return (NULL); - } - - /* - * Determine if source surface is 32bit or 8bit - */ - is32bit = (src->format->BitsPerPixel == 32); - if ((is32bit) || (src->format->BitsPerPixel == 8)) { - /* - * Use source surface 'as is' - */ - rz_src = src; - src_converted = 0; - } else { - /* - * New source surface is 32bit with a defined RGBA ordering - */ - rz_src = SDL_CreateRGBSurface(SDL_SWSURFACE, src->w, src->h, 32, -#if SDL_BYTEORDER == SDL_LIL_ENDIAN - 0x000000ff, 0x0000ff00, 0x00ff0000, 0xff000000 -#else - 0xff000000, 0x00ff0000, 0x0000ff00, 0x000000ff -#endif - ); - if (rz_src==NULL) { - haveError = 1; - goto exitShrinkSurface; - } - - SDL_BlitSurface(src, NULL, rz_src, NULL); - src_converted = 1; - is32bit = 1; - } - - /* - * Lock the surface - */ - if (SDL_MUSTLOCK(rz_src)) { - if (SDL_LockSurface(rz_src) < 0) { - haveError = 1; - goto exitShrinkSurface; - } - } - - /* Get size for target */ - dstwidth=rz_src->w/factorx; - while (dstwidth*factorx>rz_src->w) { dstwidth--; } - dstheight=rz_src->h/factory; - while (dstheight*factory>rz_src->h) { dstheight--; } - - /* - * Alloc space to completely contain the shrunken surface - * (with added guard rows) - */ - if (is32bit==1) { - /* - * Target surface is 32bit with source RGBA/ABGR ordering - */ - rz_dst = - SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 32, - rz_src->format->Rmask, rz_src->format->Gmask, - rz_src->format->Bmask, rz_src->format->Amask); - } else { - /* - * Target surface is 8bit - */ - rz_dst = SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 8, 0, 0, 0, 0); - } - - /* Check target */ - if (rz_dst == NULL) { - haveError = 1; - goto exitShrinkSurface; - } - - /* Adjust for guard rows */ - rz_dst->h = dstheight; - - /* - * Check which kind of surface we have - */ - if (is32bit==1) { - /* - * Call the 32bit transformation routine to do the shrinking (using alpha) - */ - result = _shrinkSurfaceRGBA(rz_src, rz_dst, factorx, factory); - if ((result!=0) || (rz_dst==NULL)) { - haveError = 1; - goto exitShrinkSurface; - } - } else { - /* - * Copy palette and colorkey info - */ - for (i = 0; i < rz_src->format->palette->ncolors; i++) { - rz_dst->format->palette->colors[i] = rz_src->format->palette->colors[i]; - } - rz_dst->format->palette->ncolors = rz_src->format->palette->ncolors; - /* - * Call the 8bit transformation routine to do the shrinking - */ - result = _shrinkSurfaceY(rz_src, rz_dst, factorx, factory); - if (result!=0) { - haveError = 1; - goto exitShrinkSurface; - } - } - -exitShrinkSurface: - if (rz_src!=NULL) { - /* - * Unlock source surface - */ - if (SDL_MUSTLOCK(rz_src)) { - SDL_UnlockSurface(rz_src); - } - - /* - * Cleanup temp surface - */ - if (src_converted==1) { - SDL_FreeSurface(rz_src); - } - } - - /* Check error state; maybe need to cleanup destination */ - if (haveError==1) { - if (rz_dst!=NULL) { - SDL_FreeSurface(rz_dst); - } - rz_dst=NULL; - } - - /* - * Return destination surface - */ - return (rz_dst); -} diff --git a/src/sdl2gfx/SDL2_rotozoom.cpp b/src/sdl2gfx/SDL2_rotozoom.cpp new file mode 100644 index 000000000..73461999f --- /dev/null +++ b/src/sdl2gfx/SDL2_rotozoom.cpp @@ -0,0 +1,1667 @@ +/* + +SDL2_rotozoom.c: rotozoomer, zoomer and shrinker for 32bit or 8bit surfaces + +Copyright (C) 2012-2014 Andreas Schiffler + +This software is provided 'as-is', without any express or implied +warranty. In no event will the authors be held liable for any damages +arising from the use of this software. + +Permission is granted to anyone to use this software for any purpose, +including commercial applications, and to alter it and redistribute it +freely, subject to the following restrictions: + +1. The origin of this software must not be misrepresented; you must not +claim that you wrote the original software. If you use this software +in a product, an acknowledgment in the product documentation would be +appreciated but is not required. + +2. Altered source versions must be plainly marked as such, and must not be +misrepresented as being the original software. + +3. This notice may not be removed or altered from any source +distribution. + +Andreas Schiffler -- aschiffler at ferzkopp dot net + +Changed for ManaPlus (C) 2013-2017 ManaPlus developers + +*/ + +#ifdef WIN32 +#include +#endif + +#include +#include + +#include "sdl2gfx/SDL2_rotozoom.h" + +/* ---- Internally used structures */ + +/*! +\brief A 32 bit RGBA pixel. +*/ +typedef struct tColorRGBA { + Uint8 r; + Uint8 g; + Uint8 b; + Uint8 a; +} tColorRGBA; + +/*! +\brief A 8bit Y/palette pixel. +*/ +typedef struct tColorY { + Uint8 y; +} tColorY; + +/*! +\brief Returns maximum of two numbers a and b. +*/ +#define MAX(a,b) (((a) > (b)) ? (a) : (b)) + +/*! +\brief Number of guard rows added to destination surfaces. + +This is a simple but effective workaround for observed issues. +These rows allocate extra memory and are then hidden from the surface. +Rows are added to the end of destination surfaces when they are allocated. +This catches any potential overflows which seem to happen with +just the right src image dimensions and scale/rotation and can lead +to a situation where the program can segfault. +*/ +#define GUARD_ROWS (2) + +/*! +\brief Lower limit of absolute zoom factor or rotation degrees. +*/ +#define VALUE_LIMIT 0.001 + +/*! +\brief Returns colorkey info for a surface +*/ +static Uint32 _colorkey(SDL_Surface *src) +{ + Uint32 key = 0; + SDL_GetColorKey(src, &key); + return key; +} + + +/*! +\brief Internal 32 bit integer-factor averaging Shrinker. + +Shrinks 32 bit RGBA/ABGR 'src' surface to 'dst' surface. +Averages color and alpha values values of src pixels to calculate dst pixels. +Assumes src and dst surfaces are of 32 bit depth. +Assumes dst surface was allocated with the correct dimensions. + +\param src The surface to shrink (input). +\param dst The shrunken surface (output). +\param factorx The horizontal shrinking ratio. +\param factory The vertical shrinking ratio. + +\return 0 for success or -1 for error. +*/ +static int _shrinkSurfaceRGBA(SDL_Surface * src, SDL_Surface * dst, int factorx, int factory) +{ + int x, y, dx, dy, dgap, ra, ga, ba, aa; + int n_average; + tColorRGBA *sp, *osp, *oosp; + tColorRGBA *dp; + + /* + * Averaging integer shrink + */ + + /* Precalculate division factor */ + n_average = factorx*factory; + + /* + * Scan destination + */ + sp = static_cast(src->pixels); + + dp = static_cast(dst->pixels); + dgap = dst->pitch - dst->w * 4; + + for (y = 0; y < dst->h; y++) { + + osp=sp; + for (x = 0; x < dst->w; x++) { + + /* Trace out source box and accumulate */ + oosp=sp; + ra=ga=ba=aa=0; + for (dy=0; dy < factory; dy++) { + for (dx=0; dx < factorx; dx++) { + ra += sp->r; + ga += sp->g; + ba += sp->b; + aa += sp->a; + + sp++; + } + /* src dx loop */ + sp = reinterpret_cast(reinterpret_cast(sp) + (src->pitch - 4*factorx)); // next y + } + /* src dy loop */ + + /* next box-x */ + sp = reinterpret_cast(reinterpret_cast(oosp) + 4*factorx); + + /* Store result in destination */ + dp->r = ra/n_average; + dp->g = ga/n_average; + dp->b = ba/n_average; + dp->a = aa/n_average; + + /* + * Advance destination pointer + */ + dp++; + } + /* dst x loop */ + + /* next box-y */ + sp = reinterpret_cast(reinterpret_cast(osp) + src->pitch*factory); + + /* + * Advance destination pointers + */ + dp = reinterpret_cast(reinterpret_cast(dp) + dgap); + } + /* dst y loop */ + + return (0); +} + +/*! +\brief Internal 8 bit integer-factor averaging shrinker. + +Shrinks 8bit Y 'src' surface to 'dst' surface. +Averages color (brightness) values values of src pixels to calculate dst pixels. +Assumes src and dst surfaces are of 8 bit depth. +Assumes dst surface was allocated with the correct dimensions. + +\param src The surface to shrink (input). +\param dst The shrunken surface (output). +\param factorx The horizontal shrinking ratio. +\param factory The vertical shrinking ratio. + +\return 0 for success or -1 for error. +*/ +static int _shrinkSurfaceY(SDL_Surface * src, SDL_Surface * dst, int factorx, int factory) +{ + int x, y, dx, dy, dgap, a; + int n_average; + Uint8 *sp, *osp, *oosp; + Uint8 *dp; + + /* + * Averaging integer shrink + */ + + /* Precalculate division factor */ + n_average = factorx*factory; + + /* + * Scan destination + */ + sp = static_cast(src->pixels); + + dp = static_cast(dst->pixels); + dgap = dst->pitch - dst->w; + + for (y = 0; y < dst->h; y++) { + + osp=sp; + for (x = 0; x < dst->w; x++) { + + /* Trace out source box and accumulate */ + oosp=sp; + a=0; + for (dy=0; dy < factory; dy++) { + for (dx=0; dx < factorx; dx++) { + a += (*sp); + /* next x */ + sp++; + } + /* end src dx loop */ + /* next y */ + sp = static_cast(static_cast(sp) + (src->pitch - factorx)); + } + /* end src dy loop */ + + /* next box-x */ + sp = static_cast(static_cast(oosp) + factorx); + + /* Store result in destination */ + *dp = a/n_average; + + /* + * Advance destination pointer + */ + dp++; + } + /* end dst x loop */ + + /* next box-y */ + sp = static_cast(static_cast(osp) + src->pitch*factory); + + /* + * Advance destination pointers + */ + dp = static_cast(static_cast(dp) + dgap); + } + /* end dst y loop */ + + return (0); +} + +/*! +\brief Internal 32 bit Zoomer with optional anti-aliasing by bilinear interpolation. + +Zooms 32 bit RGBA/ABGR 'src' surface to 'dst' surface. +Assumes src and dst surfaces are of 32 bit depth. +Assumes dst surface was allocated with the correct dimensions. + +\param src The surface to zoom (input). +\param dst The zoomed surface (output). +\param flipx Flag indicating if the image should be horizontally flipped. +\param flipy Flag indicating if the image should be vertically flipped. +\param smooth Antialiasing flag; set to SMOOTHING_ON to enable. + +\return 0 for success or -1 for error. +*/ +static int _zoomSurfaceRGBA(SDL_Surface * src, SDL_Surface * dst, int flipx, int flipy, int smooth) +{ + int x, y, sx, sy, ssx, ssy, *sax, *say, *csax, *csay, *salast, csx, csy, ex, ey, cx, cy, sstep, sstepx, sstepy; + tColorRGBA *c00, *c01, *c10, *c11; + tColorRGBA *sp, *csp, *dp; + int spixelgap, spixelw, spixelh, dgap, t1, t2; + + /* + * Allocate memory for row/column increments + */ + if ((sax = static_cast(malloc((dst->w + 1) * sizeof(Uint32)))) == nullptr) { + return (-1); + } + if ((say = static_cast(malloc((dst->h + 1) * sizeof(Uint32)))) == nullptr) { + free(sax); + return (-1); + } + + /* + * Precalculate row increments + */ + spixelw = (src->w - 1); + spixelh = (src->h - 1); + if (smooth) { + sx = static_cast(65536.0 * static_cast(spixelw) / static_cast(dst->w - 1)); + sy = static_cast(65536.0 * static_cast(spixelh) / static_cast(dst->h - 1)); + } else { + sx = static_cast(65536.0 * static_cast(src->w) / static_cast(dst->w)); + sy = static_cast(65536.0 * static_cast(src->h) / static_cast(dst->h)); + } + + /* Maximum scaled source size */ + ssx = (src->w << 16) - 1; + ssy = (src->h << 16) - 1; + + /* Precalculate horizontal row increments */ + csx = 0; + csax = sax; + for (x = 0; x <= dst->w; x++) { + *csax = csx; + csax++; + csx += sx; + + /* Guard from overflows */ + if (csx > ssx) { + csx = ssx; + } + } + + /* Precalculate vertical row increments */ + csy = 0; + csay = say; + for (y = 0; y <= dst->h; y++) { + *csay = csy; + csay++; + csy += sy; + + /* Guard from overflows */ + if (csy > ssy) { + csy = ssy; + } + } + + sp = static_cast(src->pixels); + dp = static_cast(dst->pixels); + dgap = dst->pitch - dst->w * 4; + spixelgap = src->pitch/4; + + if (flipx) sp += spixelw; + if (flipy) sp += (spixelgap * spixelh); + + /* + * Switch between interpolating and non-interpolating code + */ + if (smooth) { + + /* + * Interpolating Zoom + */ + csay = say; + for (y = 0; y < dst->h; y++) { + csp = sp; + csax = sax; + for (x = 0; x < dst->w; x++) { + /* + * Setup color source pointers + */ + ex = (*csax & 0xffff); + ey = (*csay & 0xffff); + cx = (*csax >> 16); + cy = (*csay >> 16); + sstepx = cx < spixelw; + sstepy = cy < spixelh; + c00 = sp; + c01 = sp; + c10 = sp; + if (sstepy) { + if (flipy) { + c10 -= spixelgap; + } else { + c10 += spixelgap; + } + } + c11 = c10; + if (sstepx) { + if (flipx) { + c01--; + c11--; + } else { + c01++; + c11++; + } + } + + /* + * Draw and interpolate colors + */ + t1 = ((((c01->r - c00->r) * ex) >> 16) + c00->r) & 0xff; + t2 = ((((c11->r - c10->r) * ex) >> 16) + c10->r) & 0xff; + dp->r = (((t2 - t1) * ey) >> 16) + t1; + t1 = ((((c01->g - c00->g) * ex) >> 16) + c00->g) & 0xff; + t2 = ((((c11->g - c10->g) * ex) >> 16) + c10->g) & 0xff; + dp->g = (((t2 - t1) * ey) >> 16) + t1; + t1 = ((((c01->b - c00->b) * ex) >> 16) + c00->b) & 0xff; + t2 = ((((c11->b - c10->b) * ex) >> 16) + c10->b) & 0xff; + dp->b = (((t2 - t1) * ey) >> 16) + t1; + t1 = ((((c01->a - c00->a) * ex) >> 16) + c00->a) & 0xff; + t2 = ((((c11->a - c10->a) * ex) >> 16) + c10->a) & 0xff; + dp->a = (((t2 - t1) * ey) >> 16) + t1; + /* + * Advance source pointer x + */ + salast = csax; + csax++; + sstep = (*csax >> 16) - (*salast >> 16); + if (flipx) { + sp -= sstep; + } else { + sp += sstep; + } + + /* + * Advance destination pointer x + */ + dp++; + } + /* + * Advance source pointer y + */ + salast = csay; + csay++; + sstep = (*csay >> 16) - (*salast >> 16); + sstep *= spixelgap; + if (flipy) { + sp = csp - sstep; + } else { + sp = csp + sstep; + } + + /* + * Advance destination pointer y + */ + dp = reinterpret_cast(reinterpret_cast(dp) + dgap); + } + } else { + /* + * Non-Interpolating Zoom + */ + csay = say; + for (y = 0; y < dst->h; y++) { + csp = sp; + csax = sax; + for (x = 0; x < dst->w; x++) { + /* + * Draw + */ + *dp = *sp; + + /* + * Advance source pointer x + */ + salast = csax; + csax++; + sstep = (*csax >> 16) - (*salast >> 16); + if (flipx) sstep = -sstep; + sp += sstep; + + /* + * Advance destination pointer x + */ + dp++; + } + /* + * Advance source pointer y + */ + salast = csay; + csay++; + sstep = (*csay >> 16) - (*salast >> 16); + sstep *= spixelgap; + if (flipy) sstep = -sstep; + sp = csp + sstep; + + /* + * Advance destination pointer y + */ + dp = reinterpret_cast(reinterpret_cast(dp) + dgap); + } + } + + /* + * Remove temp arrays + */ + free(sax); + free(say); + + return (0); +} + +/*! + +\brief Internal 8 bit Zoomer without smoothing. + +Zooms 8bit palette/Y 'src' surface to 'dst' surface. +Assumes src and dst surfaces are of 8 bit depth. +Assumes dst surface was allocated with the correct dimensions. + +\param src The surface to zoom (input). +\param dst The zoomed surface (output). +\param flipx Flag indicating if the image should be horizontally flipped. +\param flipy Flag indicating if the image should be vertically flipped. + +\return 0 for success or -1 for error. +*/ +static int _zoomSurfaceY(SDL_Surface * src, SDL_Surface * dst, int flipx, int flipy) +{ + int x, y; + Uint32 *sax, *say, *csax, *csay; + int csx, csy; + Uint8 *sp, *dp, *csp; + int dgap; + + /* + * Allocate memory for row increments + */ + if ((sax = static_cast(malloc((dst->w + 1) * sizeof(Uint32)))) == nullptr) { + return (-1); + } + if ((say = static_cast(malloc((dst->h + 1) * sizeof(Uint32)))) == nullptr) { + free(sax); + return (-1); + } + + /* + * Pointer setup + */ + sp = csp = static_cast(src->pixels); + dp = static_cast(dst->pixels); + dgap = dst->pitch - dst->w; + + if (flipx) csp += (src->w-1); + if (flipy) csp = (static_cast(csp) + src->pitch*(src->h-1) ); + + /* + * Precalculate row increments + */ + csx = 0; + csax = sax; + for (x = 0; x < dst->w; x++) { + csx += src->w; + *csax = 0; + while (csx >= dst->w) { + csx -= dst->w; + (*csax)++; + } + (*csax) = (*csax) * (flipx ? -1 : 1); + csax++; + } + csy = 0; + csay = say; + for (y = 0; y < dst->h; y++) { + csy += src->h; + *csay = 0; + while (csy >= dst->h) { + csy -= dst->h; + (*csay)++; + } + (*csay) = (*csay) * (flipy ? -1 : 1); + csay++; + } + + /* + * Draw + */ + csay = say; + for (y = 0; y < dst->h; y++) { + csax = sax; + sp = csp; + for (x = 0; x < dst->w; x++) { + /* + * Draw + */ + *dp = *sp; + /* + * Advance source pointers + */ + sp += (*csax); + csax++; + /* + * Advance destination pointer + */ + dp++; + } + /* + * Advance source pointer (for row) + */ + csp += ((*csay) * src->pitch); + csay++; + + /* + * Advance destination pointers + */ + dp += dgap; + } + + /* + * Remove temp arrays + */ + free(sax); + free(say); + + return (0); +} + +/*! +\brief Internal 32 bit rotozoomer with optional anti-aliasing. + +Rotates and zooms 32 bit RGBA/ABGR 'src' surface to 'dst' surface based on the control +parameters by scanning the destination surface and applying optionally anti-aliasing +by bilinear interpolation. +Assumes src and dst surfaces are of 32 bit depth. +Assumes dst surface was allocated with the correct dimensions. + +\param src Source surface. +\param dst Destination surface. +\param cx Horizontal center coordinate. +\param cy Vertical center coordinate. +\param isin Integer version of sine of angle. +\param icos Integer version of cosine of angle. +\param flipx Flag indicating horizontal mirroring should be applied. +\param flipy Flag indicating vertical mirroring should be applied. +\param smooth Flag indicating anti-aliasing should be used. +*/ +static void _transformSurfaceRGBA(SDL_Surface * src, SDL_Surface * dst, int cx, int cy, int isin, int icos, int flipx, int flipy, int smooth) +{ + int x, y, t1, t2, dx, dy, xd, yd, sdx, sdy, ax, ay, ex, ey, sw, sh; + tColorRGBA c00, c01, c10, c11, cswap; + tColorRGBA *pc, *sp; + int gap; + + /* + * Variable setup + */ + xd = ((src->w - dst->w) << 15); + yd = ((src->h - dst->h) << 15); + ax = (cx << 16) - (icos * cx); + ay = (cy << 16) - (isin * cx); + sw = src->w - 1; + sh = src->h - 1; + pc = static_cast(dst->pixels); + gap = dst->pitch - dst->w * 4; + + /* + * Switch between interpolating and non-interpolating code + */ + if (smooth) { + for (y = 0; y < dst->h; y++) { + dy = cy - y; + sdx = (ax + (isin * dy)) + xd; + sdy = (ay - (icos * dy)) + yd; + for (x = 0; x < dst->w; x++) { + dx = (sdx >> 16); + dy = (sdy >> 16); + if (flipx) dx = sw - dx; + if (flipy) dy = sh - dy; + if ((dx > -1) && (dy > -1) && (dx < (src->w-1)) && (dy < (src->h-1))) { + sp = static_cast(src->pixels); + sp += ((src->pitch/4) * dy); + sp += dx; + c00 = *sp; + sp += 1; + c01 = *sp; + sp += (src->pitch/4); + c11 = *sp; + sp -= 1; + c10 = *sp; + if (flipx) { + cswap = c00; c00=c01; c01=cswap; + cswap = c10; c10=c11; c11=cswap; + } + if (flipy) { + cswap = c00; c00=c10; c10=cswap; + cswap = c01; c01=c11; c11=cswap; + } + /* + * Interpolate colors + */ + ex = (sdx & 0xffff); + ey = (sdy & 0xffff); + t1 = ((((c01.r - c00.r) * ex) >> 16) + c00.r) & 0xff; + t2 = ((((c11.r - c10.r) * ex) >> 16) + c10.r) & 0xff; + pc->r = (((t2 - t1) * ey) >> 16) + t1; + t1 = ((((c01.g - c00.g) * ex) >> 16) + c00.g) & 0xff; + t2 = ((((c11.g - c10.g) * ex) >> 16) + c10.g) & 0xff; + pc->g = (((t2 - t1) * ey) >> 16) + t1; + t1 = ((((c01.b - c00.b) * ex) >> 16) + c00.b) & 0xff; + t2 = ((((c11.b - c10.b) * ex) >> 16) + c10.b) & 0xff; + pc->b = (((t2 - t1) * ey) >> 16) + t1; + t1 = ((((c01.a - c00.a) * ex) >> 16) + c00.a) & 0xff; + t2 = ((((c11.a - c10.a) * ex) >> 16) + c10.a) & 0xff; + pc->a = (((t2 - t1) * ey) >> 16) + t1; + } + sdx += icos; + sdy += isin; + pc++; + } + pc = reinterpret_cast(reinterpret_cast(pc) + gap); + } + } else { + for (y = 0; y < dst->h; y++) { + dy = cy - y; + sdx = (ax + (isin * dy)) + xd; + sdy = (ay - (icos * dy)) + yd; + for (x = 0; x < dst->w; x++) { + dx = static_cast(sdx >> 16); + dy = static_cast(sdy >> 16); + if (flipx) dx = (src->w-1)-dx; + if (flipy) dy = (src->h-1)-dy; + if ((dx >= 0) && (dy >= 0) && (dx < src->w) && (dy < src->h)) { + sp = reinterpret_cast(reinterpret_cast(src->pixels) + src->pitch * dy); + sp += dx; + *pc = *sp; + } + sdx += icos; + sdy += isin; + pc++; + } + pc = reinterpret_cast(reinterpret_cast(pc) + gap); + } + } +} + +/*! + +\brief Rotates and zooms 8 bit palette/Y 'src' surface to 'dst' surface without smoothing. + +Rotates and zooms 8 bit RGBA/ABGR 'src' surface to 'dst' surface based on the control +parameters by scanning the destination surface. +Assumes src and dst surfaces are of 8 bit depth. +Assumes dst surface was allocated with the correct dimensions. + +\param src Source surface. +\param dst Destination surface. +\param cx Horizontal center coordinate. +\param cy Vertical center coordinate. +\param isin Integer version of sine of angle. +\param icos Integer version of cosine of angle. +\param flipx Flag indicating horizontal mirroring should be applied. +\param flipy Flag indicating vertical mirroring should be applied. +*/ +static void transformSurfaceY(SDL_Surface * src, SDL_Surface * dst, int cx, int cy, int isin, int icos, int flipx, int flipy) +{ + int x, y, dx, dy, xd, yd, sdx, sdy, ax, ay; + tColorY *pc, *sp; + int gap; + + /* + * Variable setup + */ + xd = ((src->w - dst->w) << 15); + yd = ((src->h - dst->h) << 15); + ax = (cx << 16) - (icos * cx); + ay = (cy << 16) - (isin * cx); + pc = static_cast(dst->pixels); + gap = dst->pitch - dst->w; + /* + * Clear surface to colorkey + */ + memset(pc, static_cast(_colorkey(src) & 0xff), dst->pitch * dst->h); + /* + * Iterate through destination surface + */ + for (y = 0; y < dst->h; y++) { + dy = cy - y; + sdx = (ax + (isin * dy)) + xd; + sdy = (ay - (icos * dy)) + yd; + for (x = 0; x < dst->w; x++) { + dx = static_cast(sdx >> 16); + dy = static_cast(sdy >> 16); + if (flipx) dx = (src->w-1)-dx; + if (flipy) dy = (src->h-1)-dy; + if ((dx >= 0) && (dy >= 0) && (dx < src->w) && (dy < src->h)) { + sp = static_cast(src->pixels); + sp += (src->pitch * dy + dx); + *pc = *sp; + } + sdx += icos; + sdy += isin; + pc++; + } + pc += gap; + } +} + +/*! +\brief Rotates a 8/16/24/32 bit surface in increments of 90 degrees. + +Specialized 90 degree rotator which rotates a 'src' surface in 90 degree +increments clockwise returning a new surface. Faster than rotozoomer since +no scanning or interpolation takes place. Input surface must be 8/16/24/32 bit. +(code contributed by J. Schiller, improved by C. Allport and A. Schiffler) + +\param src Source surface to rotate. +\param numClockwiseTurns Number of clockwise 90 degree turns to apply to the source. + +\returns The new, rotated surface; or nullptr for surfaces with incorrect input format. +*/ +SDL_Surface* rotateSurface90Degrees(SDL_Surface* src, int numClockwiseTurns) +{ + int row, col, newWidth, newHeight; + int bpp, bpr; + SDL_Surface* dst; + Uint8* srcBuf; + Uint8* dstBuf; + int normalizedClockwiseTurns; + + /* Has to be a valid surface pointer and be a Nbit surface where n is divisible by 8 */ + if (!src || + !src->format) { + SDL_SetError("NULL source surface or source surface format"); + return nullptr; + } + + if ((src->format->BitsPerPixel % 8) != 0) { + SDL_SetError("Invalid source surface bit depth"); + return nullptr; + } + + /* normalize numClockwiseTurns */ + normalizedClockwiseTurns = (numClockwiseTurns % 4); + if (normalizedClockwiseTurns < 0) { + normalizedClockwiseTurns += 4; + } + + /* If turns are even, our new width/height will be the same as the source surface */ + if (normalizedClockwiseTurns % 2) { + newWidth = src->h; + newHeight = src->w; + } else { + newWidth = src->w; + newHeight = src->h; + } + + dst = SDL_CreateRGBSurface( src->flags, newWidth, newHeight, src->format->BitsPerPixel, + src->format->Rmask, + src->format->Gmask, + src->format->Bmask, + src->format->Amask); + if(!dst) { + SDL_SetError("Could not create destination surface"); + return nullptr; + } + + if (SDL_MUSTLOCK(src)) { + SDL_LockSurface(src); + } + if (SDL_MUSTLOCK(dst)) { + SDL_LockSurface(dst); + } + + /* Calculate byte-per-pixel */ + bpp = src->format->BitsPerPixel / 8; + + switch(normalizedClockwiseTurns) { + case 0: /* Make a copy of the surface */ + { + /* Unfortunately SDL_BlitSurface cannot be used to make a copy of the surface + since it does not preserve alpha. */ + + if (src->pitch == dst->pitch) { + /* If the pitch is the same for both surfaces, the memory can be copied all at once. */ + memcpy(dst->pixels, src->pixels, (src->h * src->pitch)); + } + else + { + /* If the pitch differs, copy each row separately */ + srcBuf = static_cast(src->pixels); + dstBuf = static_cast(dst->pixels); + bpr = src->w * bpp; + for (row = 0; row < src->h; row++) { + memcpy(dstBuf, srcBuf, bpr); + srcBuf += src->pitch; + dstBuf += dst->pitch; + } + } + } + break; + + /* rotate clockwise */ + case 1: /* rotated 90 degrees clockwise */ + { + for (row = 0; row < src->h; ++row) { + srcBuf = static_cast(src->pixels) + (row * src->pitch); + dstBuf = static_cast(dst->pixels) + (dst->w - row - 1) * bpp; + for (col = 0; col < src->w; ++col) { + memcpy (dstBuf, srcBuf, bpp); + srcBuf += bpp; + dstBuf += dst->pitch; + } + } + } + break; + + case 2: /* rotated 180 degrees clockwise */ + { + for (row = 0; row < src->h; ++row) { + srcBuf = static_cast(src->pixels) + (row * src->pitch); + dstBuf = static_cast(dst->pixels) + ((dst->h - row - 1) * dst->pitch) + (dst->w - 1) * bpp; + for (col = 0; col < src->w; ++col) { + memcpy (dstBuf, srcBuf, bpp); + srcBuf += bpp; + dstBuf -= bpp; + } + } + } + break; + + case 3: /* rotated 270 degrees clockwise */ + { + for (row = 0; row < src->h; ++row) { + srcBuf = static_cast(src->pixels) + (row * src->pitch); + dstBuf = static_cast(dst->pixels) + (row * bpp) + (dst->h * dst->pitch); + for (col = 0; col < src->w; ++col) { + memcpy (dstBuf, srcBuf, bpp); + srcBuf += bpp; + dstBuf -= dst->pitch; + } + } + } + break; + default: + break; + } + /* end switch */ + + if (SDL_MUSTLOCK(src)) { + SDL_UnlockSurface(src); + } + if (SDL_MUSTLOCK(dst)) { + SDL_UnlockSurface(dst); + } + + return dst; +} + + +/*! +\brief Internal target surface sizing function for rotozooms with trig result return. + +\param width The source surface width. +\param height The source surface height. +\param angle The angle to rotate in degrees. +\param zoomx The horizontal scaling factor. +\param zoomy The vertical scaling factor. +\param dstwidth The calculated width of the destination surface. +\param dstheight The calculated height of the destination surface. +\param canglezoom The sine of the angle adjusted by the zoom factor. +\param sanglezoom The cosine of the angle adjusted by the zoom factor. + +*/ +static void _rotozoomSurfaceSizeTrig(int width, int height, double angle, double zoomx, double zoomy, + int *dstwidth, int *dstheight, + double *canglezoom, double *sanglezoom) +{ + double x, y, cx, cy, sx, sy; + double radangle; + int dstwidthhalf, dstheighthalf; + + /* + * Determine destination width and height by rotating a centered source box + */ + radangle = angle * (M_PI / 180.0); + *sanglezoom = sin(radangle); + *canglezoom = cos(radangle); + *sanglezoom *= zoomx; + *canglezoom *= zoomy; + x = static_cast(width / 2); + y = static_cast(height / 2); + cx = *canglezoom * x; + cy = *canglezoom * y; + sx = *sanglezoom * x; + sy = *sanglezoom * y; + + dstwidthhalf = MAX(static_cast( + ceil(MAX(MAX(MAX(fabs(cx + sy), fabs(cx - sy)), fabs(-cx + sy)), fabs(-cx - sy)))), 1); + dstheighthalf = MAX(static_cast( + ceil(MAX(MAX(MAX(fabs(sx + cy), fabs(sx - cy)), fabs(-sx + cy)), fabs(-sx - cy)))), 1); + *dstwidth = 2 * dstwidthhalf; + *dstheight = 2 * dstheighthalf; +} + +/*! +\brief Returns the size of the resulting target surface for a rotozoomSurfaceXY() call. + +\param width The source surface width. +\param height The source surface height. +\param angle The angle to rotate in degrees. +\param zoomx The horizontal scaling factor. +\param zoomy The vertical scaling factor. +\param dstwidth The calculated width of the rotozoomed destination surface. +\param dstheight The calculated height of the rotozoomed destination surface. +*/ +void rotozoomSurfaceSizeXY(int width, int height, double angle, double zoomx, double zoomy, int *dstwidth, int *dstheight) +{ + double dummy_sanglezoom, dummy_canglezoom; + + _rotozoomSurfaceSizeTrig(width, height, angle, zoomx, zoomy, dstwidth, dstheight, &dummy_sanglezoom, &dummy_canglezoom); +} + +/*! +\brief Returns the size of the resulting target surface for a rotozoomSurface() call. + +\param width The source surface width. +\param height The source surface height. +\param angle The angle to rotate in degrees. +\param zoom The scaling factor. +\param dstwidth The calculated width of the rotozoomed destination surface. +\param dstheight The calculated height of the rotozoomed destination surface. +*/ +void rotozoomSurfaceSize(int width, int height, double angle, double zoom, int *dstwidth, int *dstheight) +{ + double dummy_sanglezoom, dummy_canglezoom; + + _rotozoomSurfaceSizeTrig(width, height, angle, zoom, zoom, dstwidth, dstheight, &dummy_sanglezoom, &dummy_canglezoom); +} + +/*! +\brief Rotates and zooms a surface and optional anti-aliasing. + +Rotates and zoomes a 32bit or 8bit 'src' surface to newly created 'dst' surface. +'angle' is the rotation in degrees and 'zoom' a scaling factor. If 'smooth' is set +then the destination 32bit surface is anti-aliased. If the surface is not 8bit +or 32bit RGBA/ABGR it will be converted into a 32bit RGBA format on the fly. + +\param src The surface to rotozoom. +\param angle The angle to rotate in degrees. +\param zoom The scaling factor. +\param smooth Antialiasing flag; set to SMOOTHING_ON to enable. + +\return The new rotozoomed surface. +*/ +SDL_Surface *rotozoomSurface(SDL_Surface * src, double angle, double zoom, int smooth) +{ + return rotozoomSurfaceXY(src, angle, zoom, zoom, smooth); +} + +/*! +\brief Rotates and zooms a surface with different horizontal and vertival scaling factors and optional anti-aliasing. + +Rotates and zooms a 32bit or 8bit 'src' surface to newly created 'dst' surface. +'angle' is the rotation in degrees, 'zoomx and 'zoomy' scaling factors. If 'smooth' is set +then the destination 32bit surface is anti-aliased. If the surface is not 8bit +or 32bit RGBA/ABGR it will be converted into a 32bit RGBA format on the fly. + +\param src The surface to rotozoom. +\param angle The angle to rotate in degrees. +\param zoomx The horizontal scaling factor. +\param zoomy The vertical scaling factor. +\param smooth Antialiasing flag; set to SMOOTHING_ON to enable. + +\return The new rotozoomed surface. +*/ +SDL_Surface *rotozoomSurfaceXY(SDL_Surface * src, double angle, double zoomx, double zoomy, int smooth) +{ + SDL_Surface *rz_src; + SDL_Surface *rz_dst; + double zoominv; + double sanglezoom, canglezoom, sanglezoominv, canglezoominv; + int dstwidthhalf, dstwidth, dstheighthalf, dstheight; + int is32bit; + int i, src_converted; + int flipx,flipy; + + /* + * Sanity check + */ + if (src == nullptr) { + return (nullptr); + } + + /* + * Determine if source surface is 32bit or 8bit + */ + is32bit = (src->format->BitsPerPixel == 32); + if ((is32bit) || (src->format->BitsPerPixel == 8)) { + /* + * Use source surface 'as is' + */ + rz_src = src; + src_converted = 0; + } else { + /* + * New source surface is 32bit with a defined RGBA ordering + */ + rz_src = + SDL_CreateRGBSurface(SDL_SWSURFACE, src->w, src->h, 32, +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + 0x000000ff, 0x0000ff00, 0x00ff0000, 0xff000000 +#else + 0xff000000, 0x00ff0000, 0x0000ff00, 0x000000ff +#endif + ); + + SDL_BlitSurface(src, nullptr, rz_src, nullptr); + + src_converted = 1; + is32bit = 1; + } + + /* + * Sanity check zoom factor + */ + flipx = (zoomx<0.0); + if (flipx) zoomx=-zoomx; + flipy = (zoomy<0.0); + if (flipy) zoomy=-zoomy; + if (zoomx < VALUE_LIMIT) zoomx = VALUE_LIMIT; + if (zoomy < VALUE_LIMIT) zoomy = VALUE_LIMIT; + zoominv = 65536.0 / (zoomx * zoomx); + + /* + * Check if we have a rotozoom or just a zoom + */ + if (fabs(angle) > VALUE_LIMIT) { + + /* + * Angle!=0: full rotozoom + */ + /* + * ----------------------- + */ + + /* Determine target size */ + _rotozoomSurfaceSizeTrig(rz_src->w, rz_src->h, angle, zoomx, zoomy, &dstwidth, &dstheight, &canglezoom, &sanglezoom); + + /* + * Calculate target factors from sin/cos and zoom + */ + sanglezoominv = sanglezoom; + canglezoominv = canglezoom; + sanglezoominv *= zoominv; + canglezoominv *= zoominv; + + /* Calculate half size */ + dstwidthhalf = dstwidth / 2; + dstheighthalf = dstheight / 2; + + /* + * Alloc space to completely contain the rotated surface + */ + rz_dst = nullptr; + if (is32bit) { + /* + * Target surface is 32bit with source RGBA/ABGR ordering + */ + rz_dst = + SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 32, + rz_src->format->Rmask, rz_src->format->Gmask, + rz_src->format->Bmask, rz_src->format->Amask); + } else { + /* + * Target surface is 8bit + */ + rz_dst = SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 8, 0, 0, 0, 0); + } + + /* Check target */ + if (rz_dst == nullptr) + return nullptr; + + /* Adjust for guard rows */ + rz_dst->h = dstheight; + + /* + * Lock source surface + */ + if (SDL_MUSTLOCK(rz_src)) { + SDL_LockSurface(rz_src); + } + + /* + * Check which kind of surface we have + */ + if (is32bit) { + /* + * Call the 32bit transformation routine to do the rotation (using alpha) + */ + _transformSurfaceRGBA(rz_src, rz_dst, dstwidthhalf, dstheighthalf, + static_cast(sanglezoominv), static_cast(canglezoominv), + flipx, flipy, + smooth); + } else { + /* + * Copy palette and colorkey info + */ + for (i = 0; i < rz_src->format->palette->ncolors; i++) { + rz_dst->format->palette->colors[i] = rz_src->format->palette->colors[i]; + } + rz_dst->format->palette->ncolors = rz_src->format->palette->ncolors; + /* + * Call the 8bit transformation routine to do the rotation + */ + transformSurfaceY(rz_src, rz_dst, dstwidthhalf, dstheighthalf, + static_cast(sanglezoominv), static_cast(canglezoominv), + flipx, flipy); + } + /* + * Unlock source surface + */ + if (SDL_MUSTLOCK(rz_src)) { + SDL_UnlockSurface(rz_src); + } + + } else { + + /* + * Angle=0: Just a zoom + */ + /* + * -------------------- + */ + + /* + * Calculate target size + */ + zoomSurfaceSize(rz_src->w, rz_src->h, zoomx, zoomy, &dstwidth, &dstheight); + + /* + * Alloc space to completely contain the zoomed surface + */ + rz_dst = nullptr; + if (is32bit) { + /* + * Target surface is 32bit with source RGBA/ABGR ordering + */ + rz_dst = + SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 32, + rz_src->format->Rmask, rz_src->format->Gmask, + rz_src->format->Bmask, rz_src->format->Amask); + } else { + /* + * Target surface is 8bit + */ + rz_dst = SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 8, 0, 0, 0, 0); + } + + /* Check target */ + if (rz_dst == nullptr) + return nullptr; + + /* Adjust for guard rows */ + rz_dst->h = dstheight; + + /* + * Lock source surface + */ + if (SDL_MUSTLOCK(rz_src)) { + SDL_LockSurface(rz_src); + } + + /* + * Check which kind of surface we have + */ + if (is32bit) { + /* + * Call the 32bit transformation routine to do the zooming (using alpha) + */ + _zoomSurfaceRGBA(rz_src, rz_dst, flipx, flipy, smooth); + + } else { + /* + * Copy palette and colorkey info + */ + for (i = 0; i < rz_src->format->palette->ncolors; i++) { + rz_dst->format->palette->colors[i] = rz_src->format->palette->colors[i]; + } + rz_dst->format->palette->ncolors = rz_src->format->palette->ncolors; + + /* + * Call the 8bit transformation routine to do the zooming + */ + _zoomSurfaceY(rz_src, rz_dst, flipx, flipy); + } + + /* + * Unlock source surface + */ + if (SDL_MUSTLOCK(rz_src)) { + SDL_UnlockSurface(rz_src); + } + } + + /* + * Cleanup temp surface + */ + if (src_converted) { + SDL_FreeSurface(rz_src); + } + + /* + * Return destination surface + */ + return (rz_dst); +} + +/*! +\brief Calculates the size of the target surface for a zoomSurface() call. + +The minimum size of the target surface is 1. The input factors can be positive or negative. + +\param width The width of the source surface to zoom. +\param height The height of the source surface to zoom. +\param zoomx The horizontal zoom factor. +\param zoomy The vertical zoom factor. +\param dstwidth Pointer to an integer to store the calculated width of the zoomed target surface. +\param dstheight Pointer to an integer to store the calculated height of the zoomed target surface. +*/ +void zoomSurfaceSize(int width, int height, double zoomx, double zoomy, int *dstwidth, int *dstheight) +{ + /* + * Make zoom factors positive + */ + int flipx, flipy; + flipx = (zoomx<0.0); + if (flipx) zoomx = -zoomx; + flipy = (zoomy<0.0); + if (flipy) zoomy = -zoomy; + + /* + * Sanity check zoom factors + */ + if (zoomx < VALUE_LIMIT) { + zoomx = VALUE_LIMIT; + } + if (zoomy < VALUE_LIMIT) { + zoomy = VALUE_LIMIT; + } + + /* + * Calculate target size + */ + *dstwidth = static_cast(floor((static_cast(width) * zoomx) + 0.5)); + *dstheight = static_cast(floor((static_cast(height) * zoomy) + 0.5)); + if (*dstwidth < 1) { + *dstwidth = 1; + } + if (*dstheight < 1) { + *dstheight = 1; + } +} + +/*! +\brief Zoom a surface by independent horizontal and vertical factors with optional smoothing. + +Zooms a 32bit or 8bit 'src' surface to newly created 'dst' surface. +'zoomx' and 'zoomy' are scaling factors for width and height. If 'smooth' is on +then the destination 32bit surface is anti-aliased. If the surface is not 8bit +or 32bit RGBA/ABGR it will be converted into a 32bit RGBA format on the fly. +If zoom factors are negative, the image is flipped on the axes. + +\param src The surface to zoom. +\param zoomx The horizontal zoom factor. +\param zoomy The vertical zoom factor. +\param smooth Antialiasing flag; set to SMOOTHING_ON to enable. + +\return The new, zoomed surface. +*/ +SDL_Surface *zoomSurface(SDL_Surface * src, double zoomx, double zoomy, int smooth) +{ + SDL_Surface *rz_src; + SDL_Surface *rz_dst; + int dstwidth, dstheight; + int is32bit; + int i, src_converted; + int flipx, flipy; + + /* + * Sanity check + */ + if (src == nullptr) + return (nullptr); + + /* + * Determine if source surface is 32bit or 8bit + */ + is32bit = (src->format->BitsPerPixel == 32); + if ((is32bit) || (src->format->BitsPerPixel == 8)) { + /* + * Use source surface 'as is' + */ + rz_src = src; + src_converted = 0; + } else { + /* + * New source surface is 32bit with a defined RGBA ordering + */ + rz_src = + SDL_CreateRGBSurface(SDL_SWSURFACE, src->w, src->h, 32, +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + 0x000000ff, 0x0000ff00, 0x00ff0000, 0xff000000 +#else + 0xff000000, 0x00ff0000, 0x0000ff00, 0x000000ff +#endif + ); + if (rz_src == nullptr) { + return nullptr; + } + SDL_BlitSurface(src, nullptr, rz_src, nullptr); + src_converted = 1; + is32bit = 1; + } + + flipx = (zoomx<0.0); + if (flipx) zoomx = -zoomx; + flipy = (zoomy<0.0); + if (flipy) zoomy = -zoomy; + + /* Get size if target */ + zoomSurfaceSize(rz_src->w, rz_src->h, zoomx, zoomy, &dstwidth, &dstheight); + + /* + * Alloc space to completely contain the zoomed surface + */ + rz_dst = nullptr; + if (is32bit) { + /* + * Target surface is 32bit with source RGBA/ABGR ordering + */ + rz_dst = + SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 32, + rz_src->format->Rmask, rz_src->format->Gmask, + rz_src->format->Bmask, rz_src->format->Amask); + } else { + /* + * Target surface is 8bit + */ + rz_dst = SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 8, 0, 0, 0, 0); + } + + /* Check target */ + if (rz_dst == nullptr) { + /* + * Cleanup temp surface + */ + if (src_converted) { + SDL_FreeSurface(rz_src); + } + return nullptr; + } + + /* Adjust for guard rows */ + rz_dst->h = dstheight; + + /* + * Lock source surface + */ + if (SDL_MUSTLOCK(rz_src)) { + SDL_LockSurface(rz_src); + } + + /* + * Check which kind of surface we have + */ + if (is32bit) { + /* + * Call the 32bit transformation routine to do the zooming (using alpha) + */ + _zoomSurfaceRGBA(rz_src, rz_dst, flipx, flipy, smooth); + } else { + /* + * Copy palette and colorkey info + */ + for (i = 0; i < rz_src->format->palette->ncolors; i++) { + rz_dst->format->palette->colors[i] = rz_src->format->palette->colors[i]; + } + rz_dst->format->palette->ncolors = rz_src->format->palette->ncolors; + /* + * Call the 8bit transformation routine to do the zooming + */ + _zoomSurfaceY(rz_src, rz_dst, flipx, flipy); + } + /* + * Unlock source surface + */ + if (SDL_MUSTLOCK(rz_src)) { + SDL_UnlockSurface(rz_src); + } + + /* + * Cleanup temp surface + */ + if (src_converted) { + SDL_FreeSurface(rz_src); + } + + /* + * Return destination surface + */ + return (rz_dst); +} + +/*! +\brief Shrink a surface by an integer ratio using averaging. + +Shrinks a 32bit or 8bit 'src' surface to a newly created 'dst' surface. +'factorx' and 'factory' are the shrinking ratios (i.e. 2=1/2 the size, +3=1/3 the size, etc.) The destination surface is antialiased by averaging +the source box RGBA or Y information. If the surface is not 8bit +or 32bit RGBA/ABGR it will be converted into a 32bit RGBA format on the fly. +The input surface is not modified. The output surface is newly allocated. + +\param src The surface to shrink. +\param factorx The horizontal shrinking ratio. +\param factory The vertical shrinking ratio. + +\return The new, shrunken surface. +*/ +/*@nullptr@*/ +SDL_Surface *shrinkSurface(SDL_Surface *src, int factorx, int factory) +{ + int result; + SDL_Surface *rz_src; + SDL_Surface *rz_dst = nullptr; + int dstwidth, dstheight; + int is32bit; + int i, src_converted = 0; + int haveError = 0; + + /* + * Sanity check + */ + if (src == nullptr) { + return (nullptr); + } + + /* + * Determine if source surface is 32bit or 8bit + */ + is32bit = (src->format->BitsPerPixel == 32); + if ((is32bit) || (src->format->BitsPerPixel == 8)) { + /* + * Use source surface 'as is' + */ + rz_src = src; + src_converted = 0; + } else { + /* + * New source surface is 32bit with a defined RGBA ordering + */ + rz_src = SDL_CreateRGBSurface(SDL_SWSURFACE, src->w, src->h, 32, +#if SDL_BYTEORDER == SDL_LIL_ENDIAN + 0x000000ff, 0x0000ff00, 0x00ff0000, 0xff000000 +#else + 0xff000000, 0x00ff0000, 0x0000ff00, 0x000000ff +#endif + ); + if (rz_src==nullptr) { + haveError = 1; + goto exitShrinkSurface; + } + + SDL_BlitSurface(src, nullptr, rz_src, nullptr); + src_converted = 1; + is32bit = 1; + } + + /* + * Lock the surface + */ + if (SDL_MUSTLOCK(rz_src)) { + if (SDL_LockSurface(rz_src) < 0) { + haveError = 1; + goto exitShrinkSurface; + } + } + + /* Get size for target */ + dstwidth=rz_src->w/factorx; + while (dstwidth*factorx>rz_src->w) { dstwidth--; } + dstheight=rz_src->h/factory; + while (dstheight*factory>rz_src->h) { dstheight--; } + + /* + * Alloc space to completely contain the shrunken surface + * (with added guard rows) + */ + if (is32bit==1) { + /* + * Target surface is 32bit with source RGBA/ABGR ordering + */ + rz_dst = + SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 32, + rz_src->format->Rmask, rz_src->format->Gmask, + rz_src->format->Bmask, rz_src->format->Amask); + } else { + /* + * Target surface is 8bit + */ + rz_dst = SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS, 8, 0, 0, 0, 0); + } + + /* Check target */ + if (rz_dst == nullptr) { + haveError = 1; + goto exitShrinkSurface; + } + + /* Adjust for guard rows */ + rz_dst->h = dstheight; + + /* + * Check which kind of surface we have + */ + if (is32bit==1) { + /* + * Call the 32bit transformation routine to do the shrinking (using alpha) + */ + result = _shrinkSurfaceRGBA(rz_src, rz_dst, factorx, factory); + if ((result!=0) || (rz_dst==nullptr)) { + haveError = 1; + goto exitShrinkSurface; + } + } else { + /* + * Copy palette and colorkey info + */ + for (i = 0; i < rz_src->format->palette->ncolors; i++) { + rz_dst->format->palette->colors[i] = rz_src->format->palette->colors[i]; + } + rz_dst->format->palette->ncolors = rz_src->format->palette->ncolors; + /* + * Call the 8bit transformation routine to do the shrinking + */ + result = _shrinkSurfaceY(rz_src, rz_dst, factorx, factory); + if (result!=0) { + haveError = 1; + goto exitShrinkSurface; + } + } + +exitShrinkSurface: + if (rz_src!=nullptr) { + /* + * Unlock source surface + */ + if (SDL_MUSTLOCK(rz_src)) { + SDL_UnlockSurface(rz_src); + } + + /* + * Cleanup temp surface + */ + if (src_converted==1) { + SDL_FreeSurface(rz_src); + } + } + + /* Check error state; maybe need to cleanup destination */ + if (haveError==1) { + if (rz_dst!=nullptr) { + SDL_FreeSurface(rz_dst); + } + rz_dst=nullptr; + } + + /* + * Return destination surface + */ + return (rz_dst); +} diff --git a/src/sdl2gfx/SDL2_rotozoom.h b/src/sdl2gfx/SDL2_rotozoom.h index 3ae52888e..0ceb30db9 100644 --- a/src/sdl2gfx/SDL2_rotozoom.h +++ b/src/sdl2gfx/SDL2_rotozoom.h @@ -2,7 +2,7 @@ SDL2_rotozoom.c: rotozoomer, zoomer and shrinker for 32bit or 8bit surfaces -Copyright (C) 2001-2012 Andreas Schiffler +Copyright (C) 2012-2014 Andreas Schiffler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages @@ -25,6 +25,8 @@ distribution. Andreas Schiffler -- aschiffler at ferzkopp dot net +Changed for ManaPlus (C) 2013-2017 ManaPlus developers + */ #ifndef _SDL2_rotozoom_h @@ -34,8 +36,7 @@ Andreas Schiffler -- aschiffler at ferzkopp dot net /* Set up for C function definitions, even when using C++ */ #ifdef __cplusplus -extern "C" -{ +extern "C" { #endif #ifndef M_PI -- cgit v1.2.3-70-g09d2